mirror of
https://github.com/torvalds/linux.git
synced 2024-12-01 08:31:37 +00:00
net: phy: marvell10g: add downshift tunable support
Add support for the downshift tunable for the Marvell 88x3310 PHY. Downshift is only usable with firmware 0.3.5.0 and later. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Russell King
David S. Miller
parent
75f81afb27
commit
4075a6a047
@ -22,6 +22,7 @@
|
||||
* If both the fiber and copper ports are connected, the first to gain
|
||||
* link takes priority and the other port is completely locked out.
|
||||
*/
|
||||
#include <linux/bitfield.h>
|
||||
#include <linux/ctype.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/hwmon.h>
|
||||
@ -33,6 +34,8 @@
|
||||
#define MV_PHY_ALASKA_NBT_QUIRK_MASK 0xfffffffe
|
||||
#define MV_PHY_ALASKA_NBT_QUIRK_REV (MARVELL_PHY_ID_88X3310 | 0xa)
|
||||
|
||||
#define MV_VERSION(a,b,c,d) ((a) << 24 | (b) << 16 | (c) << 8 | (d))
|
||||
|
||||
enum {
|
||||
MV_PMA_FW_VER0 = 0xc011,
|
||||
MV_PMA_FW_VER1 = 0xc012,
|
||||
@ -62,6 +65,15 @@ enum {
|
||||
MV_PCS_CSCR1_MDIX_MDIX = 0x0020,
|
||||
MV_PCS_CSCR1_MDIX_AUTO = 0x0060,
|
||||
|
||||
MV_PCS_DSC1 = 0x8003,
|
||||
MV_PCS_DSC1_ENABLE = BIT(9),
|
||||
MV_PCS_DSC1_10GBT = 0x01c0,
|
||||
MV_PCS_DSC1_1GBR = 0x0038,
|
||||
MV_PCS_DSC1_100BTX = 0x0007,
|
||||
MV_PCS_DSC2 = 0x8004,
|
||||
MV_PCS_DSC2_2P5G = 0xf000,
|
||||
MV_PCS_DSC2_5G = 0x0f00,
|
||||
|
||||
MV_PCS_CSSR1 = 0x8008,
|
||||
MV_PCS_CSSR1_SPD1_MASK = 0xc000,
|
||||
MV_PCS_CSSR1_SPD1_SPD2 = 0xc000,
|
||||
@ -125,6 +137,7 @@ enum {
|
||||
};
|
||||
|
||||
struct mv3310_chip {
|
||||
bool (*has_downshift)(struct phy_device *phydev);
|
||||
void (*init_supported_interfaces)(unsigned long *mask);
|
||||
int (*get_mactype)(struct phy_device *phydev);
|
||||
int (*init_interface)(struct phy_device *phydev, int mactype);
|
||||
@ -138,6 +151,7 @@ struct mv3310_priv {
|
||||
DECLARE_BITMAP(supported_interfaces, PHY_INTERFACE_MODE_MAX);
|
||||
|
||||
u32 firmware_ver;
|
||||
bool has_downshift;
|
||||
bool rate_match;
|
||||
phy_interface_t const_interface;
|
||||
|
||||
@ -330,6 +344,71 @@ static int mv3310_reset(struct phy_device *phydev, u32 unit)
|
||||
5000, 100000, true);
|
||||
}
|
||||
|
||||
static int mv3310_get_downshift(struct phy_device *phydev, u8 *ds)
|
||||
{
|
||||
struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
|
||||
int val;
|
||||
|
||||
if (!priv->has_downshift)
|
||||
return -EOPNOTSUPP;
|
||||
|
||||
val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC1);
|
||||
if (val < 0)
|
||||
return val;
|
||||
|
||||
if (val & MV_PCS_DSC1_ENABLE)
|
||||
/* assume that all fields are the same */
|
||||
*ds = 1 + FIELD_GET(MV_PCS_DSC1_10GBT, (u16)val);
|
||||
else
|
||||
*ds = DOWNSHIFT_DEV_DISABLE;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mv3310_set_downshift(struct phy_device *phydev, u8 ds)
|
||||
{
|
||||
struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
|
||||
u16 val;
|
||||
int err;
|
||||
|
||||
if (!priv->has_downshift)
|
||||
return -EOPNOTSUPP;
|
||||
|
||||
if (ds == DOWNSHIFT_DEV_DISABLE)
|
||||
return phy_clear_bits_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC1,
|
||||
MV_PCS_DSC1_ENABLE);
|
||||
|
||||
/* DOWNSHIFT_DEV_DEFAULT_COUNT is confusing. It looks like it should
|
||||
* set the default settings for the PHY. However, it is used for
|
||||
* "ethtool --set-phy-tunable ethN downshift on". The intention is
|
||||
* to enable downshift at a default number of retries. The default
|
||||
* settings for 88x3310 are for two retries with downshift disabled.
|
||||
* So let's use two retries with downshift enabled.
|
||||
*/
|
||||
if (ds == DOWNSHIFT_DEV_DEFAULT_COUNT)
|
||||
ds = 2;
|
||||
|
||||
if (ds > 8)
|
||||
return -E2BIG;
|
||||
|
||||
ds -= 1;
|
||||
val = FIELD_PREP(MV_PCS_DSC2_2P5G, ds);
|
||||
val |= FIELD_PREP(MV_PCS_DSC2_5G, ds);
|
||||
err = phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC2,
|
||||
MV_PCS_DSC2_2P5G | MV_PCS_DSC2_5G, val);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
val = MV_PCS_DSC1_ENABLE;
|
||||
val |= FIELD_PREP(MV_PCS_DSC1_10GBT, ds);
|
||||
val |= FIELD_PREP(MV_PCS_DSC1_1GBR, ds);
|
||||
val |= FIELD_PREP(MV_PCS_DSC1_100BTX, ds);
|
||||
|
||||
return phy_modify_mmd(phydev, MDIO_MMD_PCS, MV_PCS_DSC1,
|
||||
MV_PCS_DSC1_ENABLE | MV_PCS_DSC1_10GBT |
|
||||
MV_PCS_DSC1_1GBR | MV_PCS_DSC1_100BTX, val);
|
||||
}
|
||||
|
||||
static int mv3310_get_edpd(struct phy_device *phydev, u16 *edpd)
|
||||
{
|
||||
int val;
|
||||
@ -448,6 +527,9 @@ static int mv3310_probe(struct phy_device *phydev)
|
||||
priv->firmware_ver >> 24, (priv->firmware_ver >> 16) & 255,
|
||||
(priv->firmware_ver >> 8) & 255, priv->firmware_ver & 255);
|
||||
|
||||
if (chip->has_downshift)
|
||||
priv->has_downshift = chip->has_downshift(phydev);
|
||||
|
||||
/* Powering down the port when not in use saves about 600mW */
|
||||
ret = mv3310_power_down(phydev);
|
||||
if (ret)
|
||||
@ -616,7 +698,16 @@ static int mv3310_config_init(struct phy_device *phydev)
|
||||
}
|
||||
|
||||
/* Enable EDPD mode - saving 600mW */
|
||||
return mv3310_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS);
|
||||
err = mv3310_set_edpd(phydev, ETHTOOL_PHY_EDPD_DFLT_TX_MSECS);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
/* Allow downshift */
|
||||
err = mv3310_set_downshift(phydev, DOWNSHIFT_DEV_DEFAULT_COUNT);
|
||||
if (err && err != -EOPNOTSUPP)
|
||||
return err;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mv3310_get_features(struct phy_device *phydev)
|
||||
@ -886,6 +977,8 @@ static int mv3310_get_tunable(struct phy_device *phydev,
|
||||
struct ethtool_tunable *tuna, void *data)
|
||||
{
|
||||
switch (tuna->id) {
|
||||
case ETHTOOL_PHY_DOWNSHIFT:
|
||||
return mv3310_get_downshift(phydev, data);
|
||||
case ETHTOOL_PHY_EDPD:
|
||||
return mv3310_get_edpd(phydev, data);
|
||||
default:
|
||||
@ -897,6 +990,8 @@ static int mv3310_set_tunable(struct phy_device *phydev,
|
||||
struct ethtool_tunable *tuna, const void *data)
|
||||
{
|
||||
switch (tuna->id) {
|
||||
case ETHTOOL_PHY_DOWNSHIFT:
|
||||
return mv3310_set_downshift(phydev, *(u8 *)data);
|
||||
case ETHTOOL_PHY_EDPD:
|
||||
return mv3310_set_edpd(phydev, *(u16 *)data);
|
||||
default:
|
||||
@ -904,6 +999,14 @@ static int mv3310_set_tunable(struct phy_device *phydev,
|
||||
}
|
||||
}
|
||||
|
||||
static bool mv3310_has_downshift(struct phy_device *phydev)
|
||||
{
|
||||
struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
|
||||
|
||||
/* Fails to downshift with firmware older than v0.3.5.0 */
|
||||
return priv->firmware_ver >= MV_VERSION(0,3,5,0);
|
||||
}
|
||||
|
||||
static void mv3310_init_supported_interfaces(unsigned long *mask)
|
||||
{
|
||||
__set_bit(PHY_INTERFACE_MODE_SGMII, mask);
|
||||
@ -943,6 +1046,7 @@ static void mv2111_init_supported_interfaces(unsigned long *mask)
|
||||
}
|
||||
|
||||
static const struct mv3310_chip mv3310_type = {
|
||||
.has_downshift = mv3310_has_downshift,
|
||||
.init_supported_interfaces = mv3310_init_supported_interfaces,
|
||||
.get_mactype = mv3310_get_mactype,
|
||||
.init_interface = mv3310_init_interface,
|
||||
@ -953,6 +1057,7 @@ static const struct mv3310_chip mv3310_type = {
|
||||
};
|
||||
|
||||
static const struct mv3310_chip mv3340_type = {
|
||||
.has_downshift = mv3310_has_downshift,
|
||||
.init_supported_interfaces = mv3340_init_supported_interfaces,
|
||||
.get_mactype = mv3310_get_mactype,
|
||||
.init_interface = mv3340_init_interface,
|
||||
|
||||
Loading…
Reference in New Issue
Block a user