Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-25 21:51:40 +00:00
Code Issues Packages Projects Releases Wiki Activity

Input: atarikbd - convert documentation into ReST format

Browse Source 
This file require minimum adjustments to be a valid ReST file.
Do it, in order to be able to parse it with Sphinx.

We opted to remove section numbers, as this can be automatically
generated on Sphinx, by using :numbered: tag at index.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This commit is contained in:
Mauro Carvalho Chehab 2017-04-04 17:32:51 -07:00 committed by Dmitry Torokhov
parent ad6bdccffb
commit 3f89482e7a
1 changed files with 168 additions and 57 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

225
Documentation/input/atarikbd.txt
View File

@ -1,7 +1,10 @@
====================================
Intelligent Keyboard (ikbd) Protocol
====================================
1. Introduction
Introduction
============
The Atari Corp. Intelligent Keyboard (ikbd) is a general purpose keyboard
controller that is flexible enough that it can be used in a variety of
@ -18,7 +21,8 @@ different applications of the keyboard, joysticks, or mouse. Limited use of
the controller is possible in applications in which only a unidirectional
communications medium is available by carefully designing the default modes.
3. Keyboard
Keyboard
========
The keyboard always returns key make/break scan codes. The ikbd generates
keyboard scan codes for each key press and release. The key scan make (key
@ -28,19 +32,25 @@ exists in that position on a particular keyboard. The break code for each key
is obtained by ORing 0x80 with the make code.
The special codes 0xF6 through 0xFF are reserved for use as follows:
=================== ====================================================
Code Command
=================== ====================================================
0xF6 status report
0xF7 absolute mouse position record
0xF8-0xFB relative mouse position records (lsbs determined by
mouse button states)
mouse button states)
0xFC time-of-day
0xFD joystick report (both sticks)
0xFE joystick 0 event
0xFF joystick 1 event
=================== ====================================================
The two shift keys return different scan codes in this mode. The ENTER key
and the RETurn key are also distinct.
4. Mouse
Mouse
=====
The mouse port should be capable of supporting a mouse with resolution of
approximately 200 counts (phase changes or 'clicks') per inch of travel. The
@ -53,7 +63,8 @@ key equivalents.
The mouse buttons can be treated as part of the mouse or as additional
keyboard keys.
4.1 Relative Position Reporting
Relative Position Reporting
---------------------------
In relative position mode, the ikbd will return relative mouse position
records whenever a mouse event occurs. A mouse event consists of a mouse
@ -67,7 +78,8 @@ been 'paused' ( the event will be stored until keyboard communications is
resumed) (b) while any event is being transmitted.
The relative mouse position record is a three byte record of the form
(regardless of keyboard mode):
(regardless of keyboard mode)::
%111110xy ; mouse position record flag
; where y is the right button state
; and x is the left button state
@ -81,13 +93,15 @@ If the accumulated motion before the report packet is generated exceeds the
Note that the sign of the delta y reported is a function of the Y origin
selected.
4.2 Absolute Position reporting
Absolute Position reporting
---------------------------
The ikbd can also maintain absolute mouse position. Commands exist for
resetting the mouse position, setting X/Y scaling, and interrogating the
current mouse position.
4.3 Mouse Cursor Key Mode
Mouse Cursor Key Mode
---------------------
The ikbd can translate mouse motion into the equivalent cursor keystrokes.
The number of mouse clicks per keystroke is independently programmable in
@ -99,32 +113,38 @@ break code for the appropriate cursor key. The mouse buttons produce scan
codes above those normally assigned for the largest envisioned keyboard (i.e.
LEFT=0x74 & RIGHT=0x75).
5. Joystick
Joystick
========
5.1 Joystick Event Reporting
Joystick Event Reporting
------------------------
In this mode, the ikbd generates a record whenever the joystick position is
changed (i.e. for each opening or closing of a joystick switch or trigger).
The joystick event record is two bytes of the form:
The joystick event record is two bytes of the form::
%1111111x ; Joystick event marker
; where x is Joystick 0 or 1
%x000yyyy ; where yyyy is the stick position
; and x is the trigger
5.2 Joystick Interrogation
Joystick Interrogation
----------------------
The current state of the joystick ports may be interrogated at any time in
this mode by sending an 'Interrogate Joystick' command to the ikbd.
The ikbd response to joystick interrogation is a three byte report of the form
The ikbd response to joystick interrogation is a three byte report of the form::
0xFD ; joystick report header
%x000yyyy ; Joystick 0
%x000yyyy ; Joystick 1
; where x is the trigger
; and yyy is the stick position
5.3 Joystick Monitoring
Joystick Monitoring
-------------------
A mode is available that devotes nearly all of the keyboard communications
time to reporting the state of the joystick ports at a user specifiable rate.
@ -132,7 +152,8 @@ It remains in this mode until reset or commanded into another mode. The PAUSE
command in this mode not only stop the output but also temporarily stops
scanning the joysticks (samples are not queued).
5.4 Fire Button Monitoring
Fire Button Monitoring
----------------------
A mode is provided to permit monitoring a single input bit at a high rate. In
this mode the ikbd monitors the state of the Joystick 1 fire button at the
@ -142,7 +163,8 @@ until reset or commanded into another mode. The PAUSE command in this mode not
only stops the output but also temporarily stops scanning the button (samples
are not queued).
5.5 Joystick Key Code Mode
Joystick Key Code Mode
----------------------
The ikbd may be commanded to translate the use of either joystick into the
equivalent cursor control keystroke(s). The ikbd provides a single breakpoint
@ -152,18 +174,21 @@ for the appropriate cursor motion keys. The trigger or fire buttons of the
joysticks produce pseudo key scan codes above those used by the largest key
matrix envisioned (i.e. JOYSTICK0=0x74, JOYSTICK1=0x75).
6. Time-of-Day Clock
Time-of-Day Clock
=================
The ikbd also maintains a time-of-day clock for the system. Commands are
available to set and interrogate the timer-of-day clock. Time-keeping is
maintained down to a resolution of one second.
7. Status Inquiries
Status Inquiries
================
The current state of ikbd modes and parameters may be found by sending status
inquiry commands that correspond to the ikbd set commands.
8. Power-Up Mode
Power-Up Mode
=============
The keyboard controller will perform a simple self-test on power-up to detect
major controller faults (ROM checksum and RAM test) and such things as stuck
@ -183,13 +208,17 @@ both buttons are logically connected to it. If a mouse disable command is
received while port 0 is presumed to be a mouse, the button is logically
assigned to Joystick1 (until the mouse is reenabled by another mouse command).
9. ikbd Command Set
ikbd Command Set
================
This section contains a list of commands that can be sent to the ikbd. Command
codes (such as 0x00) which are not specified should perform no operation
(NOPs).
9.1 RESET
RESET
-----
::
0x80
0x01
@ -208,7 +237,10 @@ ikbd will then scan the key matrix for any stuck (closed) keys. Any keys found
closed will cause the break scan code to be generated (the break code arriving
without being preceded by the make code is a flag for a key matrix error).
9.2. SET MOUSE BUTTON ACTION
SET MOUSE BUTTON ACTION
-----------------------
::
0x07
%00000mss ; mouse button action
@ -217,14 +249,17 @@ without being preceded by the make code is a flag for a key matrix error).
; position report
; where y=1, mouse key press causes absolute report
; and x=1, mouse key release causes absolute report
; mss=100, mouse buttons act like keys
; mss=100, mouse buttons act like keys
This command sets how the ikbd should treat the buttons on the mouse. The
default mouse button action mode is %00000000, the buttons are treated as part
of the mouse logically.
When buttons act like keys, LEFT=0x74 & RIGHT=0x75.
9.3 SET RELATIVE MOUSE POSITION REPORTING
SET RELATIVE MOUSE POSITION REPORTING
-------------------------------------
::
0x08
@ -235,14 +270,17 @@ key mode, mouse position reports may also be generated when either mouse
button is pressed or released. Otherwise the mouse buttons behave as if they
were keyboard keys.
9.4 SET ABSOLUTE MOUSE POSITIONING
SET ABSOLUTE MOUSE POSITIONING
------------------------------
::
0x09
XMSB ; X maximum (in scaled mouse clicks)
XLSB
YMSB ; Y maximum (in scaled mouse clicks)
YLSB
Set absolute mouse position maintenance. Resets the ikbd maintained X and Y
coordinates.
In this mode, the value of the internally maintained coordinates does NOT wrap
@ -250,7 +288,10 @@ between 0 and large positive numbers. Excess motion below 0 is ignored. The
command sets the maximum positive value that can be attained in the scaled
coordinate system. Motion beyond that value is also ignored.
9.5 SET MOUSE KEYCODE MOSE
SET MOUSE KEYCODE MOSE
----------------------
::
0x0A
deltax ; distance in X clicks to return (LEFT) or (RIGHT)
@ -263,7 +304,10 @@ either axis. When the keyboard is in key scan code mode, mouse motion will
cause the make code immediately followed by the break code. Note that this
command is not affected by the mouse motion origin.
9..6 SET MOUSE THRESHOLD
SET MOUSE THRESHOLD
-------------------
::
0x0B
X ; x threshold in mouse ticks (positive integers)
@ -274,7 +318,10 @@ it does NOT affect the resolution of the data returned to the host. This
command is valid only in RELATIVE MOUSE POSITIONING mode. The thresholds
default to 1 at RESET (or power-up).
9.7 SET MOUSE SCALE
SET MOUSE SCALE
---------------
::
0x0C
X ; horizontal mouse ticks per internal X
@ -288,7 +335,10 @@ information is available only by interrogating the ikbd in the ABSOLUTE MOUSE
POSITIONING mode unless the ikbd has been commanded to report on button press
or release (see SET MOSE BUTTON ACTION).
9.8 INTERROGATE MOUSE POSITION
INTERROGATE MOUSE POSITION
--------------------------
::
0x0D
Returns:
@ -306,7 +356,10 @@ or release (see SET MOSE BUTTON ACTION).
The INTERROGATE MOUSE POSITION command is valid when in the ABSOLUTE MOUSE
POSITIONING mode, regardless of the setting of the MOUSE BUTTON ACTION.
9.9 LOAD MOUSE POSITION
LOAD MOUSE POSITION
-------------------
::
0x0E
0x00 ; filler
@ -318,7 +371,10 @@ POSITIONING mode, regardless of the setting of the MOUSE BUTTON ACTION.
This command allows the user to preset the internally maintained absolute
mouse position.
9.10 SET Y=0 AT BOTTOM
SET Y=0 AT BOTTOM
-----------------
::
0x0F
@ -327,7 +383,10 @@ logical coordinate system internal to the ikbd for all relative or absolute
mouse motion. This causes mouse motion toward the user to be negative in sign
and away from the user to be positive.
9.11 SET Y=0 AT TOP
SET Y=0 AT TOP
--------------
::
0x10
@ -336,7 +395,10 @@ system within the ikbd for all relative or absolute mouse motion. (DEFAULT)
This causes mouse motion toward the user to be positive in sign and away from
the user to be negative.
9.12 RESUME
RESUME
------
::
0x11
@ -345,7 +407,10 @@ its output has been paused also causes an implicit RESUME this command can be
thought of as a NO OPERATION command. If this command is received by the ikbd
and it is not PAUSED, it is simply ignored.
9.13 DISABLE MOUSE
DISABLE MOUSE
-------------
::
0x12
@ -356,7 +421,10 @@ ABSOLUTE MOUSE POSITIONING, and SET MOUSE KEYCODE MODE. )
N.B. If the mouse buttons have been commanded to act like keyboard keys, this
command DOES affect their actions.
9.14 PAUSE OUTPUT
PAUSE OUTPUT
------------
::
0x13
@ -381,21 +449,30 @@ When the ikbd is in either the JOYSTICK MONITORING mode or the FIRE BUTTON
MONITORING mode, the PAUSE OUTPUT command also temporarily stops the
monitoring process (i.e. the samples are not enqueued for transmission).
0.15 SET JOYSTICK EVENT REPORTING
SET JOYSTICK EVENT REPORTING
----------------------------
::
0x14
Enter JOYSTICK EVENT REPORTING mode (DEFAULT). Each opening or closure of a
joystick switch or trigger causes a joystick event record to be generated.
9.16 SET JOYSTICK INTERROGATION MODE
SET JOYSTICK INTERROGATION MODE
-------------------------------
::
0x15
Disables JOYSTICK EVENT REPORTING. Host must send individual JOYSTICK
INTERROGATE commands to sense joystick state.
9.17 JOYSTICK INTERROGATE
JOYSTICK INTERROGATE
--------------------
::
0x16
@ -403,7 +480,10 @@ Return a record indicating the current state of the joysticks. This command
is valid in either the JOYSTICK EVENT REPORTING mode or the JOYSTICK
INTERROGATION MODE.
9.18 SET JOYSTICK MONITORING
SET JOYSTICK MONITORING
-----------------------
::
0x17
rate ; time between samples in hundredths of a second
@ -419,7 +499,10 @@ between joystick samples.
N.B. The user should not set the rate higher than the serial communications
channel will allow the 2 bytes packets to be transmitted.
9.19 SET FIRE BUTTON MONITORING
SET FIRE BUTTON MONITORING
--------------------------
::
0x18
Returns: (as long as in mode)
@ -432,7 +515,10 @@ is scanned at a rate that causes 8 samples to be made in the time it takes for
the previous byte to be sent to the host (i.e. scan rate = 8/10 * baud rate).
The sample interval should be as constant as possible.
9.20 SET JOYSTICK KEYCODE MODE
SET JOYSTICK KEYCODE MODE
-------------------------
::
0x19
RX ; length of time (in tenths of seconds) until
@ -462,7 +548,10 @@ Note that by setting RX and/or Ry to zero, the velocity feature can be
disabled. The values of TX and TY then become meaningless, and the generation
of cursor 'keystrokes' is set by VX and VY.
9.21 DISABLE JOYSTICKS
DISABLE JOYSTICKS
-----------------
::
0x1A
@ -472,7 +561,10 @@ joystick mode commands are SET JOYSTICK EVENT REPORTING, SET JOYSTICK
INTERROGATION MODE, SET JOYSTICK MONITORING, SET FIRE BUTTON MONITORING, and
SET JOYSTICK KEYCODE MODE.)
9.22 TIME-OF-DAY CLOCK SET
TIME-OF-DAY CLOCK SET
---------------------
::
0x1B
YY ; year (2 least significant digits)
@ -487,7 +579,10 @@ Any digit that is not a valid BCD digit should be treated as a 'don't care'
and not alter that particular field of the date or time. This permits setting
only some subfields of the time-of-day clock.
9.23 INTERROGATE TIME-OF-DAT CLOCK
INTERROGATE TIME-OF-DAT CLOCK
-----------------------------
::
0x1C
Returns:
@ -501,7 +596,10 @@ only some subfields of the time-of-day clock.
All time-of-day is sent in packed BCD format.
9.24 MEMORY LOAD
MEMORY LOAD
-----------
::
0x20
ADRMSB ; address in controller
@ -512,7 +610,10 @@ only some subfields of the time-of-day clock.
This command permits the host to load arbitrary values into the ikbd
controller memory. The time between data bytes must be less than 20ms.
9.25 MEMORY READ
MEMORY READ
-----------
::
0x21
ADRMSB ; address in controller
@ -524,7 +625,10 @@ controller memory. The time between data bytes must be less than 20ms.
This command permits the host to read from the ikbd controller memory.
9.26 CONTROLLER EXECUTE
CONTROLLER EXECUTE
------------------
::
0x22
ADRMSB ; address of subroutine in
@ -533,8 +637,11 @@ This command permits the host to read from the ikbd controller memory.
This command allows the host to command the execution of a subroutine in the
ikbd controller memory.
9.27 STATUS INQUIRIES
STATUS INQUIRIES
----------------
::
Status commands are formed by inclusively ORing 0x80 with the
relevant SET command.
@ -568,7 +675,7 @@ off the status report header byte) and later send them back as commands to
ikbd to restore its state. The 0 pad bytes will be treated as NOPs by the
ikbd.
Valid STATUS INQUIRY commands are:
Valid STATUS INQUIRY commands are::
0x87 mouse button action
0x88 mouse mode
@ -595,14 +702,17 @@ STATUS INQUIRY commands are not valid if the ikbd is in JOYSTICK MONITORING
mode or FIRE BUTTON MONITORING mode.
10. SCAN CODES
SCAN CODES
==========
The key scan codes returned by the ikbd are chosen to simplify the
implementation of GSX.
GSX Standard Keyboard Mapping.
GSX Standard Keyboard Mapping
======= ============
Hex Keytop
======= ============
01 Esc
02 1
03 2
@ -614,8 +724,8 @@ Hex Keytop
09 8
0A 9
0B 0
0C -
0D ==
0C \-
0D \=
0E BS
0F TAB
10 Q
@ -643,9 +753,9 @@ Hex Keytop
26 L
27 ;
28 '
29 `
29 \`
2A (LEFT) SHIFT
2B \
2B \\
2C Z
2D X
2E C
@ -707,3 +817,4 @@ Hex Keytop
70 KEYPAD 0
71 KEYPAD .
72 KEYPAD ENTER
======= ============