batman-adv: tvlv - add network coding container

Create network coding container to announce network coding
capabilities (if enabled).

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
This commit is contained in:
Marek Lindner 2013-04-23 21:40:00 +08:00 committed by Antonio Quartulli
parent 17cf0ea455
commit 3f4841ffb3
5 changed files with 75 additions and 1 deletions

View File

@ -58,6 +58,59 @@ static void batadv_nc_start_timer(struct batadv_priv *bat_priv)
msecs_to_jiffies(10));
}
/**
* batadv_nc_tvlv_container_update - update the network coding tvlv container
* after network coding setting change
* @bat_priv: the bat priv with all the soft interface information
*/
static void batadv_nc_tvlv_container_update(struct batadv_priv *bat_priv)
{
char nc_mode;
nc_mode = atomic_read(&bat_priv->network_coding);
switch (nc_mode) {
case 0:
batadv_tvlv_container_unregister(bat_priv, BATADV_TVLV_NC, 1);
break;
case 1:
batadv_tvlv_container_register(bat_priv, BATADV_TVLV_NC, 1,
NULL, 0);
break;
}
}
/**
* batadv_nc_status_update - update the network coding tvlv container after
* network coding setting change
* @net_dev: the soft interface net device
*/
void batadv_nc_status_update(struct net_device *net_dev)
{
struct batadv_priv *bat_priv = netdev_priv(net_dev);
batadv_nc_tvlv_container_update(bat_priv);
}
/**
* batadv_nc_tvlv_ogm_handler_v1 - process incoming nc tvlv container
* @bat_priv: the bat priv with all the soft interface information
* @orig: the orig_node of the ogm
* @flags: flags indicating the tvlv state (see batadv_tvlv_handler_flags)
* @tvlv_value: tvlv buffer containing the gateway data
* @tvlv_value_len: tvlv buffer length
*/
static void batadv_nc_tvlv_ogm_handler_v1(struct batadv_priv *bat_priv,
struct batadv_orig_node *orig,
uint8_t flags,
void *tvlv_value,
uint16_t tvlv_value_len)
{
if (flags & BATADV_TVLV_HANDLER_OGM_CIFNOTFND)
orig->capabilities &= ~BATADV_ORIG_CAPA_HAS_NC;
else
orig->capabilities |= BATADV_ORIG_CAPA_HAS_NC;
}
/**
* batadv_nc_mesh_init - initialise coding hash table and start house keeping
* @bat_priv: the bat priv with all the soft interface information
@ -87,6 +140,10 @@ int batadv_nc_mesh_init(struct batadv_priv *bat_priv)
INIT_DELAYED_WORK(&bat_priv->nc.work, batadv_nc_worker);
batadv_nc_start_timer(bat_priv);
batadv_tvlv_handler_register(bat_priv, batadv_nc_tvlv_ogm_handler_v1,
NULL, BATADV_TVLV_NC, 1,
BATADV_TVLV_HANDLER_OGM_CIFNOTFND);
batadv_nc_tvlv_container_update(bat_priv);
return 0;
err:
@ -802,6 +859,10 @@ void batadv_nc_update_nc_node(struct batadv_priv *bat_priv,
if (!atomic_read(&bat_priv->network_coding))
goto out;
/* check if orig node is network coding enabled */
if (!(orig_node->capabilities & BATADV_ORIG_CAPA_HAS_NC))
goto out;
/* accept ogms from 'good' neighbors and single hop neighbors */
if (!batadv_can_nc_with_orig(bat_priv, orig_node, ogm_packet) &&
!is_single_hop_neigh)
@ -1735,6 +1796,8 @@ free_nc_packet:
*/
void batadv_nc_mesh_free(struct batadv_priv *bat_priv)
{
batadv_tvlv_container_unregister(bat_priv, BATADV_TVLV_NC, 1);
batadv_tvlv_handler_unregister(bat_priv, BATADV_TVLV_NC, 1);
cancel_delayed_work_sync(&bat_priv->nc.work);
batadv_nc_purge_paths(bat_priv, bat_priv->nc.coding_hash, NULL);

View File

@ -22,6 +22,7 @@
#ifdef CONFIG_BATMAN_ADV_NC
void batadv_nc_status_update(struct net_device *net_dev);
int batadv_nc_init(void);
int batadv_nc_mesh_init(struct batadv_priv *bat_priv);
void batadv_nc_mesh_free(struct batadv_priv *bat_priv);
@ -47,6 +48,10 @@ int batadv_nc_init_debugfs(struct batadv_priv *bat_priv);
#else /* ifdef CONFIG_BATMAN_ADV_NC */
static inline void batadv_nc_status_update(struct net_device *net_dev)
{
}
static inline int batadv_nc_init(void)
{
return 0;

View File

@ -122,10 +122,12 @@ enum batadv_bla_claimframe {
* enum batadv_tvlv_type - tvlv type definitions
* @BATADV_TVLV_GW: gateway tvlv
* @BATADV_TVLV_DAT: distributed arp table tvlv
* @BATADV_TVLV_NC: network coding tvlv
*/
enum batadv_tvlv_type {
BATADV_TVLV_GW = 0x01,
BATADV_TVLV_DAT = 0x02,
BATADV_TVLV_NC = 0x03,
};
/* the destination hardware field in the ARP frame is used to

View File

@ -21,6 +21,7 @@
#include "sysfs.h"
#include "translation-table.h"
#include "distributed-arp-table.h"
#include "network-coding.h"
#include "originator.h"
#include "hard-interface.h"
#include "gateway_common.h"
@ -447,7 +448,8 @@ static BATADV_ATTR(gw_bandwidth, S_IRUGO | S_IWUSR, batadv_show_gw_bwidth,
BATADV_ATTR_SIF_UINT(log_level, S_IRUGO | S_IWUSR, 0, BATADV_DBG_ALL, NULL);
#endif
#ifdef CONFIG_BATMAN_ADV_NC
BATADV_ATTR_SIF_BOOL(network_coding, S_IRUGO | S_IWUSR, NULL);
BATADV_ATTR_SIF_BOOL(network_coding, S_IRUGO | S_IWUSR,
batadv_nc_status_update);
#endif
static struct batadv_attribute *batadv_mesh_attrs[] = {

View File

@ -188,9 +188,11 @@ struct batadv_orig_node {
/**
* enum batadv_orig_capabilities - orig node capabilities
* @BATADV_ORIG_CAPA_HAS_DAT: orig node has distributed arp table enabled
* @BATADV_ORIG_CAPA_HAS_NC: orig node has network coding enabled
*/
enum batadv_orig_capabilities {
BATADV_ORIG_CAPA_HAS_DAT = BIT(0),
BATADV_ORIG_CAPA_HAS_NC = BIT(1),
};
/**