RTC for 6.0

New drivers: - Microchip PolarFire - Nuvoton NCT3018Y - TI K3 RTC Subsystem: - Replace flush_scheduled_work() with flush_work() - Remove deprecated ida_simple_get()/ida_simple_remove() calls Drivers: - use simple i2c probe where possible - sun6i: add R329 support - zynqmp: add calibration support - vr41xx: remove unused driver -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEBqsFVZXh8s/0O5JiY6TcMGxwOjIFAmL2dLsACgkQY6TcMGxw OjK+ig//YDSXeTC5X1osHyeeWSVcbKieWPhd8QAMLG23OGQdFt0k/GZZb3Rb7vG2 3HZukr/LosicaZ67bKWtOPCnvfSGUtq7CMcj077eIYa2s1CpTgXtosWLJZKqAXgi Rjk4A4CK2W+iCeUCnwtlotbdWyi4MP767CysoPG/h49uENICmlCT8s9wk7lUwaDp 1uKANvZDWXumVz6wrGd6t9VQ1ToB+q5+bOqjEXExUH7KynqVx8FD/y8RblM5UsNq UnBhJq6eKN5uoKjyjb4I4zE5Wh96ciYiy8+b2OcteWXNe/y0lxXFOM5cjcqTPCUl P6xTi76JDbus3Fc5kNem1Cx9qiPM8hto0ll2P7ydY6FW4WOZtaxlCx1KmmddFzmy oeYDwdjmuKurAMVqme/jLciYtFrZtIhl/qzCJLwWb2qRqYZrlgh4Hd2v4Bq7ZP7Z 18L2g6zSEFv1ptooLiIqmUfqoGIiVYSvDEWotSGTHZ2mr9FmnFiqhG8PdQNVlB58 SuObtoewahp8V+b2N2+rU0WBqDBMJdur3dax9HyFdRZSQiIhatC9gu9PnB7pyimB pZ4z9QStwXM49MFRMwHS7yT0zexQbqOqJvVpz4hi3hCZKWrzWPysjvkaxsBolDKn kZNhwmx+NWG5o9KB5ct2E0FbXbyvN7zNbdQKFdp67u/ug0vb4iI= =hoJf -----END PGP SIGNATURE----- Merge tag 'rtc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "New drivers: - Microchip PolarFire - Nuvoton NCT3018Y - TI K3 RTC Subsystem: - Replace flush_scheduled_work() with flush_work() - Remove deprecated ida_simple_get()/ida_simple_remove() calls Drivers: - use simple i2c probe where possible - sun6i: add R329 support - zynqmp: add calibration support - vr41xx: remove unused driver" * tag 'rtc-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (31 commits) rtc: spear: set range max rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0 rtc: zynqmp: initialize fract_tick rtc: Add NCT3018Y real time clock driver dt-bindings: rtc: nuvoton: add NCT3018Y Real Time Clock dt-bindings: rtc: nxp,pcf85063: Convert to DT schema dt-bindings: rtc: microcrystal,rv3032: Add missing type to 'trickle-voltage-millivolt' rtc: rx8025: fix 12/24 hour mode detection on RX-8035 rtc: cros-ec: Only warn once in .remove() about notifier_chain problems rtc: vr41xx: remove driver rtc: mpfs: remove 'pending' variable from mpfs_rtc_wakeup_irq_handler() rtc: rv8803: fix missing unlock on error in rv8803_set_time() rtc: zynqmp: Add calibration set and get support rtc: zynqmp: Updated calibration value dt-bindings: rtc: zynqmp: Add clock information rtc: sun6i: add support for R329 RTC rtc: Directly use ida_alloc()/free() rtc: Introduce ti-k3-rtc dt-bindings: rtc: Add TI K3 RTC description dt-bindings: rtc: qcom-pm8xxx-rtc: Update the maintainers section ...
2024-11-24 21:21:41 +00:00 · 2022-08-12 18:17:42 -07:00 · 2022-08-12 18:17:42 -07:00 · 3d076fec5a
commit 3d076fec5a
parent 4a9350597a 03c4cd6f89
48 changed files with 2063 additions and 540 deletions
--- a/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
+++ b/Documentation/devicetree/bindings/rtc/microcrystal,rv3032.yaml
@ -32,6 +32,7 @@ properties:
      - 11000

  trickle-voltage-millivolt:
+    $ref: /schemas/types.yaml#/definitions/uint32
    enum:
      - 1750
      - 3000
--- a/Documentation/devicetree/bindings/rtc/nuvoton,nct3018y.yaml
+++ b/Documentation/devicetree/bindings/rtc/nuvoton,nct3018y.yaml
@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nuvoton,nct3018y.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NUVOTON NCT3018Y Real Time Clock
+
+allOf:
+  - $ref: "rtc.yaml#"
+
+maintainers:
+  - Medad CChien <ctcchien@nuvoton.com>
+  - Mia Lin <mimi05633@gmail.com>
+
+properties:
+  compatible:
+    const: nuvoton,nct3018y
+
+  reg:
+    maxItems: 1
+
+  start-year: true
+
+  reset-source: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@6f {
+            compatible = "nuvoton,nct3018y";
+            reg = <0x6f>;
+        };
+    };
+
+...
--- a/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt
+++ b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.txt
@ -1,32 +0,0 @@
-* NXP PCF85063 Real Time Clock
-
-Required properties:
- compatible: Should one of contain:
-	"nxp,pca85073a",
-	"nxp,pcf85063",
-	"nxp,pcf85063a",
-	"nxp,pcf85063tp",
-	"microcrystal,rv8263"
- reg: I2C address for chip.
-
-Optional property:
- quartz-load-femtofarads: The capacitive load of the quartz(x-tal),
-  expressed in femto Farad (fF). Valid values are 7000 and 12500.
-  Default value (if no value is specified) is 7000fF.
-
-Optional child node:
- clock: Provide this if the square wave pin is used as boot-enabled fixed clock.
-
-Example:
-
-pcf85063: rtc@51 {
-	compatible = "nxp,pcf85063";
-	reg = <0x51>;
-	quartz-load-femtofarads = <12500>;
-
-		clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-};
--- a/Documentation/devicetree/bindings/rtc/nxp,pcf85063.yaml
+++ b/Documentation/devicetree/bindings/rtc/nxp,pcf85063.yaml
@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/nxp,pcf85063.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCF85063 Real Time Clock
+
+maintainers:
+  - Alexander Stein <alexander.stein@ew.tq-group.com>
+
+properties:
+  compatible:
+    enum:
+      - microcrystal,rv8263
+      - nxp,pcf85063
+      - nxp,pcf85063a
+      - nxp,pcf85063tp
+      - nxp,pca85073a
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  quartz-load-femtofarads:
+    description:
+      The capacitive load of the quartz(x-tal).
+    enum: [7000, 12500]
+    default: 7000
+
+  clock:
+    $ref: /schemas/clock/fixed-clock.yaml
+    description:
+      Provide this if the square wave pin is used as boot-enabled
+      fixed clock.
+
+  wakeup-source: true
+
+allOf:
+  - $ref: rtc.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - microcrystal,rv8263
+    then:
+      properties:
+        quartz-load-femtofarads: false
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - nxp,pcf85063
+    then:
+      properties:
+        quartz-load-femtofarads:
+          const: 7000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@51 {
+          compatible = "nxp,pcf85063a";
+          reg = <0x51>;
+          quartz-load-femtofarads = <12500>;
+
+          clock {
+            compatible = "fixed-clock";
+            #clock-cells = <0>;
+            clock-frequency = <32768>;
+          };
+        };
+      };
--- a/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml
@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Qualcomm PM8xxx PMIC RTC device

 maintainers:
-  - Satya Priya <skakit@codeaurora.org>
+  - Satya Priya <quic_c_skakit@quicinc.com>

 properties:
  compatible:
--- a/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
+++ b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
@ -14,6 +14,8 @@ For MediaTek PMIC wrapper bus bindings, see:
 Required properties:
 - compatible: Should be one of follows
       "mediatek,mt6323-rtc": for MT6323 PMIC
+       "mediatek,mt6358-rtc": for MT6358 PMIC
+       "mediatek,mt6366-rtc", "mediatek,mt6358-rtc": for MT6366 PMIC
       "mediatek,mt6397-rtc": for MT6397 PMIC

 Example:
--- a/Documentation/devicetree/bindings/rtc/ti,k3-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/ti,k3-rtc.yaml
@ -0,0 +1,62 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/ti,k3-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Real Time Clock
+
+maintainers:
+  - Nishanth Menon <nm@ti.com>
+
+description: |
+  This RTC appears in the AM62x family of SoCs.
+
+allOf:
+  - $ref: "rtc.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - ti,am62-rtc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: VBUS Interface clock
+      - description: 32k Clock source (external or internal).
+
+  clock-names:
+    items:
+      - const: vbus
+      - const: osc32k
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    rtc@2b1f0000 {
+        compatible = "ti,am62-rtc";
+        reg = <0x2b1f0000 0x100>;
+        interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+        power-domains = <&bar 0>;
+        clocks = <&foo 0>, <&foo 1>;
+        clock-names = "vbus", "osc32k";
+        wakeup-source;
+    };
--- a/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/xlnx,zynqmp-rtc.yaml
@ -23,8 +23,15 @@ properties:
  reg:
    maxItems: 1

+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: rtc
+
  interrupts:
-    minItems: 2
+    maxItems: 2

  interrupt-names:
    items:
@ -39,6 +46,7 @@ properties:
    minimum: 0x1
    maximum: 0x1FFFFF
    default: 0x198233
+    deprecated: true

 required:
  - compatible
@ -61,5 +69,7 @@ examples:
        interrupts = <0 26 4>, <0 27 4>;
        interrupt-names = "alarm", "sec";
        calibration = <0x198233>;
+        clock-names = "rtc";
+        clocks = <&rtc_clk>;
      };
    };
--- a/3
+++ b/3
@ -2486,11 +2486,13 @@ S:	Supported
 F:	Documentation/devicetree/bindings/*/*/*npcm*
 F:	Documentation/devicetree/bindings/*/*npcm*
 F:	Documentation/devicetree/bindings/arm/npcm/*
+F:	Documentation/devicetree/bindings/rtc/nuvoton,nct3018y.yaml
 F:	arch/arm/boot/dts/nuvoton-npcm*
 F:	arch/arm/mach-npcm/
 F:	arch/arm64/boot/dts/nuvoton/
 F:	drivers/*/*npcm*
 F:	drivers/*/*/*npcm*
+F:	drivers/rtc/rtc-nct3018y.c
 F:	include/dt-bindings/clock/nuvoton,npcm7xx-clock.h
 F:	include/dt-bindings/clock/nuvoton,npcm845-clk.h

@ -17529,6 +17531,7 @@ F:	drivers/char/hw_random/mpfs-rng.c
 F:	drivers/clk/microchip/clk-mpfs.c
 F:	drivers/mailbox/mailbox-mpfs.c
 F:	drivers/pci/controller/pcie-microchip-host.c
+F:	drivers/rtc/rtc-mpfs.c
 F:	drivers/soc/microchip/
 F:	drivers/spi/spi-microchip-core.c
 F:	drivers/usb/musb/mpfs.c
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@ -383,6 +383,16 @@ config RTC_DRV_MAX77686
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-max77686.

+config RTC_DRV_NCT3018Y
+	tristate "Nuvoton NCT3018Y"
+	depends on OF
+	help
+	   If you say yes here you get support for the Nuvoton NCT3018Y I2C RTC
+	   chip.
+
+	   This driver can also be built as a module, if so, the module will be
+	   called "rtc-nct3018y".
+
 config RTC_DRV_RK808
 	tristate "Rockchip RK805/RK808/RK809/RK817/RK818 RTC"
 	depends on MFD_RK808
@ -1478,16 +1488,6 @@ config RTC_DRV_SUNPLUS
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-sunplus.

-config RTC_DRV_VR41XX
-	tristate "NEC VR41XX"
-	depends on CPU_VR41XX || COMPILE_TEST
-	help
-	  If you say Y here you will get access to the real time clock
-	  built into your NEC VR41XX CPU.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called rtc-vr41xx.
-
 config RTC_DRV_PL030
 	tristate "ARM AMBA PL030 RTC"
 	depends on ARM_AMBA
@ -1929,6 +1929,17 @@ config RTC_DRV_ASPEED
 	  This driver can also be built as a module, if so, the module
 	  will be called "rtc-aspeed".

+config RTC_DRV_TI_K3
+	tristate "TI K3 RTC"
+	depends on ARCH_K3 || COMPILE_TEST
+	select REGMAP_MMIO
+	help
+	  If you say yes here you get support for the Texas Instruments's
+	  Real Time Clock for K3 architecture.
+
+	  This driver can also be built as a module, if so, the module
+	  will be called "rtc-ti-k3".
+
 comment "HID Sensor RTC drivers"

 config RTC_DRV_HID_SENSOR_TIME
@ -1973,4 +1984,14 @@ config RTC_DRV_MSC313
 	  This driver can also be built as a module, if so, the module
 	  will be called "rtc-msc313".

+config RTC_DRV_POLARFIRE_SOC
+	tristate "Microchip PolarFire SoC built-in RTC"
+	depends on SOC_MICROCHIP_POLARFIRE
+	help
+	  If you say yes here you will get support for the
+	  built-in RTC on Polarfire SoC.
+
+	  This driver can also be built as a module, if so, the module
+	  will be called "rtc-mpfs".
+
 endif # RTC_CLASS
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@ -112,6 +112,7 @@ obj-$(CONFIG_RTC_DRV_MV)	+= rtc-mv.o
 obj-$(CONFIG_RTC_DRV_MXC)	+= rtc-mxc.o
 obj-$(CONFIG_RTC_DRV_MXC_V2)	+= rtc-mxc_v2.o
 obj-$(CONFIG_RTC_DRV_GAMECUBE)	+= rtc-gamecube.o
+obj-$(CONFIG_RTC_DRV_NCT3018Y)	+= rtc-nct3018y.o
 obj-$(CONFIG_RTC_DRV_NTXEC)	+= rtc-ntxec.o
 obj-$(CONFIG_RTC_DRV_OMAP)	+= rtc-omap.o
 obj-$(CONFIG_RTC_DRV_OPAL)	+= rtc-opal.o
@ -130,6 +131,7 @@ obj-$(CONFIG_RTC_DRV_PIC32)	+= rtc-pic32.o
 obj-$(CONFIG_RTC_DRV_PL030)	+= rtc-pl030.o
 obj-$(CONFIG_RTC_DRV_PL031)	+= rtc-pl031.o
 obj-$(CONFIG_RTC_DRV_PM8XXX)	+= rtc-pm8xxx.o
+obj-$(CONFIG_RTC_DRV_POLARFIRE_SOC)	+= rtc-mpfs.o
 obj-$(CONFIG_RTC_DRV_PS3)	+= rtc-ps3.o
 obj-$(CONFIG_RTC_DRV_PXA)	+= rtc-pxa.o
 obj-$(CONFIG_RTC_DRV_R7301)	+= rtc-r7301.o
@ -172,11 +174,11 @@ obj-$(CONFIG_RTC_DRV_SUNPLUS)	+= rtc-sunplus.o
 obj-$(CONFIG_RTC_DRV_SUNXI)	+= rtc-sunxi.o
 obj-$(CONFIG_RTC_DRV_TEGRA)	+= rtc-tegra.o
 obj-$(CONFIG_RTC_DRV_TEST)	+= rtc-test.o
+obj-$(CONFIG_RTC_DRV_TI_K3)	+= rtc-ti-k3.o
 obj-$(CONFIG_RTC_DRV_TPS6586X)	+= rtc-tps6586x.o
 obj-$(CONFIG_RTC_DRV_TPS65910)	+= rtc-tps65910.o
 obj-$(CONFIG_RTC_DRV_TWL4030)	+= rtc-twl.o
 obj-$(CONFIG_RTC_DRV_V3020)	+= rtc-v3020.o
-obj-$(CONFIG_RTC_DRV_VR41XX)	+= rtc-vr41xx.o
 obj-$(CONFIG_RTC_DRV_VT8500)	+= rtc-vt8500.o
 obj-$(CONFIG_RTC_DRV_WILCO_EC)	+= rtc-wilco-ec.o
 obj-$(CONFIG_RTC_DRV_WM831X)	+= rtc-wm831x.o
--- a/drivers/rtc/class.c
+++ b/drivers/rtc/class.c
@ -36,7 +36,7 @@ static void rtc_device_release(struct device *dev)

 	cancel_work_sync(&rtc->irqwork);

-	ida_simple_remove(&rtc_ida, rtc->id);
+	ida_free(&rtc_ida, rtc->id);
 	mutex_destroy(&rtc->ops_lock);
 	kfree(rtc);
 }
@ -262,7 +262,7 @@ static int rtc_device_get_id(struct device *dev)
 	}

 	if (id < 0)
-		id = ida_simple_get(&rtc_ida, 0, 0, GFP_KERNEL);
+		id = ida_alloc(&rtc_ida, GFP_KERNEL);

 	return id;
 }
@ -368,7 +368,7 @@ struct rtc_device *devm_rtc_allocate_device(struct device *dev)

 	rtc = rtc_allocate_device();
 	if (!rtc) {
-		ida_simple_remove(&rtc_ida, id);
+		ida_free(&rtc_ida, id);
 		return ERR_PTR(-ENOMEM);
 	}

--- a/drivers/rtc/dev.c
+++ b/drivers/rtc/dev.c
@ -96,7 +96,7 @@ static int clear_uie(struct rtc_device *rtc)
 		}
 		if (rtc->uie_task_active) {
 			spin_unlock_irq(&rtc->irq_lock);
-			flush_scheduled_work();
+			flush_work(&rtc->uie_task);
 			spin_lock_irq(&rtc->irq_lock);
 		}
 		rtc->uie_irq_active = 0;
@ -566,9 +566,3 @@ void __init rtc_dev_init(void)
 	if (err < 0)
 		pr_err("failed to allocate char dev region\n");
 }
-
-void __exit rtc_dev_exit(void)
-{
-	if (rtc_devt)
-		unregister_chrdev_region(rtc_devt, RTC_DEV_MAX);
-}
--- a/drivers/rtc/rtc-ab-b5ze-s3.c
+++ b/drivers/rtc/rtc-ab-b5ze-s3.c
@ -817,8 +817,7 @@ static const struct regmap_config abb5zes3_rtc_regmap_config = {
 	.val_bits = 8,
 };

-static int abb5zes3_probe(struct i2c_client *client,
-			  const struct i2c_device_id *id)
+static int abb5zes3_probe(struct i2c_client *client)
 {
 	struct abb5zes3_rtc_data *data = NULL;
 	struct device *dev = &client->dev;
@ -945,7 +944,7 @@ static struct i2c_driver abb5zes3_driver = {
 		.pm = &abb5zes3_rtc_pm_ops,
 		.of_match_table = of_match_ptr(abb5zes3_dt_match),
 	},
-	.probe	  = abb5zes3_probe,
+	.probe_new = abb5zes3_probe,
 	.id_table = abb5zes3_id,
 };
 module_i2c_driver(abb5zes3_driver);
--- a/drivers/rtc/rtc-ab-eoz9.c
+++ b/drivers/rtc/rtc-ab-eoz9.c
@ -495,8 +495,7 @@ static void abeoz9_hwmon_register(struct device *dev,

 #endif

-static int abeoz9_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int abeoz9_probe(struct i2c_client *client)
 {
 	struct abeoz9_rtc_data *data = NULL;
 	struct device *dev = &client->dev;
@ -580,7 +579,7 @@ static struct i2c_driver abeoz9_driver = {
 		.name = "rtc-ab-eoz9",
 		.of_match_table = of_match_ptr(abeoz9_dt_match),
 	},
-	.probe	  = abeoz9_probe,
+	.probe_new = abeoz9_probe,
 	.id_table = abeoz9_id,
 };

--- a/drivers/rtc/rtc-bq32k.c
+++ b/drivers/rtc/rtc-bq32k.c
@ -249,8 +249,7 @@ static void bq32k_sysfs_unregister(struct device *dev)
 	device_remove_file(dev, &dev_attr_trickle_charge_bypass);
 }

-static int bq32k_probe(struct i2c_client *client,
-				const struct i2c_device_id *id)
+static int bq32k_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
 	struct rtc_device *rtc;
@ -322,7 +321,7 @@ static struct i2c_driver bq32k_driver = {
 		.name	= "bq32k",
 		.of_match_table = of_match_ptr(bq32k_of_match),
 	},
-	.probe		= bq32k_probe,
+	.probe_new	= bq32k_probe,
 	.remove		= bq32k_remove,
 	.id_table	= bq32k_id,
 };
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@ -1260,9 +1260,6 @@ static void use_acpi_alarm_quirks(void)
 	if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
 		return;

-	if (!(acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0))
-		return;
-
 	if (!is_hpet_enabled())
 		return;

--- a/drivers/rtc/rtc-core.h
+++ b/drivers/rtc/rtc-core.h
@ -2,7 +2,6 @@
 #ifdef CONFIG_RTC_INTF_DEV

 extern void __init rtc_dev_init(void);
-extern void __exit rtc_dev_exit(void);
 extern void rtc_dev_prepare(struct rtc_device *rtc);

 #else
@ -11,10 +10,6 @@ static inline void rtc_dev_init(void)
 {
 }

-static inline void rtc_dev_exit(void)
-{
-}
-
 static inline void rtc_dev_prepare(struct rtc_device *rtc)
 {
 }
--- a/drivers/rtc/rtc-cros-ec.c
+++ b/drivers/rtc/rtc-cros-ec.c
@ -375,10 +375,8 @@ static int cros_ec_rtc_remove(struct platform_device *pdev)
 	ret = blocking_notifier_chain_unregister(
 				&cros_ec_rtc->cros_ec->event_notifier,
 				&cros_ec_rtc->notifier);
-	if (ret) {
+	if (ret)
 		dev_err(dev, "failed to unregister notifier\n");
-		return ret;
-	}

 	return 0;
 }
--- a/drivers/rtc/rtc-ds1374.c
+++ b/drivers/rtc/rtc-ds1374.c
@ -467,8 +467,7 @@ static const struct watchdog_ops ds1374_wdt_ops = {
 *
 *****************************************************************************
 */
-static int ds1374_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int ds1374_probe(struct i2c_client *client)
 {
 	struct ds1374 *ds1374;
 	int ret;
@ -575,7 +574,7 @@ static struct i2c_driver ds1374_driver = {
 		.of_match_table = of_match_ptr(ds1374_of_match),
 		.pm = &ds1374_pm,
 	},
-	.probe = ds1374_probe,
+	.probe_new = ds1374_probe,
 	.remove = ds1374_remove,
 	.id_table = ds1374_id,
 };
--- a/drivers/rtc/rtc-ds1672.c
+++ b/drivers/rtc/rtc-ds1672.c
@ -106,8 +106,7 @@ static const struct rtc_class_ops ds1672_rtc_ops = {
 	.set_time = ds1672_set_time,
 };

-static int ds1672_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int ds1672_probe(struct i2c_client *client)
 {
 	int err = 0;
 	struct rtc_device *rtc;
@ -150,7 +149,7 @@ static struct i2c_driver ds1672_driver = {
 		   .name = "rtc-ds1672",
 		   .of_match_table = of_match_ptr(ds1672_of_match),
 	},
-	.probe = &ds1672_probe,
+	.probe_new = ds1672_probe,
 	.id_table = ds1672_id,
 };

--- a/drivers/rtc/rtc-ds3232.c
+++ b/drivers/rtc/rtc-ds3232.c
@ -566,8 +566,7 @@ static const struct dev_pm_ops ds3232_pm_ops = {

 #if IS_ENABLED(CONFIG_I2C)

-static int ds3232_i2c_probe(struct i2c_client *client,
-			    const struct i2c_device_id *id)
+static int ds3232_i2c_probe(struct i2c_client *client)
 {
 	struct regmap *regmap;
 	static const struct regmap_config config = {
@ -604,7 +603,7 @@ static struct i2c_driver ds3232_driver = {
 		.of_match_table = of_match_ptr(ds3232_of_match),
 		.pm	= &ds3232_pm_ops,
 	},
-	.probe = ds3232_i2c_probe,
+	.probe_new = ds3232_i2c_probe,
 	.id_table = ds3232_id,
 };

--- a/drivers/rtc/rtc-em3027.c
+++ b/drivers/rtc/rtc-em3027.c
@ -111,8 +111,7 @@ static const struct rtc_class_ops em3027_rtc_ops = {
 	.set_time = em3027_set_time,
 };

-static int em3027_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int em3027_probe(struct i2c_client *client)
 {
 	struct rtc_device *rtc;

@ -148,7 +147,7 @@ static struct i2c_driver em3027_driver = {
 		   .name = "rtc-em3027",
 		   .of_match_table = of_match_ptr(em3027_of_match),
 	},
-	.probe = &em3027_probe,
+	.probe_new = em3027_probe,
 	.id_table = em3027_id,
 };

--- a/drivers/rtc/rtc-fm3130.c
+++ b/drivers/rtc/rtc-fm3130.c
@ -340,8 +340,7 @@ static const struct rtc_class_ops fm3130_rtc_ops = {

 static struct i2c_driver fm3130_driver;

-static int fm3130_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int fm3130_probe(struct i2c_client *client)
 {
 	struct fm3130		*fm3130;
 	int			err = -ENODEV;
@ -518,7 +517,7 @@ static struct i2c_driver fm3130_driver = {
 	.driver = {
 		.name	= "rtc-fm3130",
 	},
-	.probe		= fm3130_probe,
+	.probe_new	= fm3130_probe,
 	.id_table	= fm3130_id,
 };

--- a/drivers/rtc/rtc-hym8563.c
+++ b/drivers/rtc/rtc-hym8563.c
@ -495,8 +495,7 @@ static int hym8563_resume(struct device *dev)

 static SIMPLE_DEV_PM_OPS(hym8563_pm_ops, hym8563_suspend, hym8563_resume);

-static int hym8563_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+static int hym8563_probe(struct i2c_client *client)
 {
 	struct hym8563 *hym8563;
 	int ret;
@ -572,7 +571,7 @@ static struct i2c_driver hym8563_driver = {
 		.pm	= &hym8563_pm_ops,
 		.of_match_table	= hym8563_dt_idtable,
 	},
-	.probe		= hym8563_probe,
+	.probe_new	= hym8563_probe,
 	.id_table	= hym8563_id,
 };

--- a/drivers/rtc/rtc-isl12022.c
+++ b/drivers/rtc/rtc-isl12022.c
@ -232,8 +232,7 @@ static const struct rtc_class_ops isl12022_rtc_ops = {
 	.set_time	= isl12022_rtc_set_time,
 };

-static int isl12022_probe(struct i2c_client *client,
-			  const struct i2c_device_id *id)
+static int isl12022_probe(struct i2c_client *client)
 {
 	struct isl12022 *isl12022;

@ -275,7 +274,7 @@ static struct i2c_driver isl12022_driver = {
 		.of_match_table = of_match_ptr(isl12022_dt_match),
 #endif
 	},
-	.probe		= isl12022_probe,
+	.probe_new	= isl12022_probe,
 	.id_table	= isl12022_id,
 };

--- a/drivers/rtc/rtc-isl1208.c
+++ b/drivers/rtc/rtc-isl1208.c
@ -880,10 +880,14 @@ isl1208_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	if (rc)
 		return rc;

-	if (client->irq > 0)
+	if (client->irq > 0) {
 		rc = isl1208_setup_irq(client, client->irq);
-	if (rc)
-		return rc;
+		if (rc)
+			return rc;
+
+	} else {
+		clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, isl1208->rtc->features);
+	}

 	if (evdet_irq > 0 && evdet_irq != client->irq)
 		rc = isl1208_setup_irq(client, evdet_irq);
--- a/drivers/rtc/rtc-max6900.c
+++ b/drivers/rtc/rtc-max6900.c
@ -197,8 +197,7 @@ static const struct rtc_class_ops max6900_rtc_ops = {
 	.set_time = max6900_rtc_set_time,
 };

-static int
-max6900_probe(struct i2c_client *client, const struct i2c_device_id *id)
+static int max6900_probe(struct i2c_client *client)
 {
 	struct rtc_device *rtc;

@ -225,7 +224,7 @@ static struct i2c_driver max6900_driver = {
 	.driver = {
 		   .name = "rtc-max6900",
 		   },
-	.probe = max6900_probe,
+	.probe_new = max6900_probe,
 	.id_table = max6900_id,
 };

--- a/drivers/rtc/rtc-mc146818-lib.c
+++ b/drivers/rtc/rtc-mc146818-lib.c
@ -21,13 +21,13 @@ bool mc146818_avoid_UIP(void (*callback)(unsigned char seconds, void *param),
 	unsigned long flags;
 	unsigned char seconds;

-	for (i = 0; i < 10; i++) {
+	for (i = 0; i < 100; i++) {
 		spin_lock_irqsave(&rtc_lock, flags);

 		/*
 		 * Check whether there is an update in progress during which the
 		 * readout is unspecified. The maximum update time is ~2ms. Poll
-		 * every msec for completion.
+		 * every 100 usec for completion.
 		 *
 		 * Store the second value before checking UIP so a long lasting
 		 * NMI which happens to hit after the UIP check cannot make
@ -37,7 +37,7 @@ bool mc146818_avoid_UIP(void (*callback)(unsigned char seconds, void *param),

 		if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP) {
 			spin_unlock_irqrestore(&rtc_lock, flags);
-			mdelay(1);
+			udelay(100);
 			continue;
 		}

@ -56,7 +56,7 @@ bool mc146818_avoid_UIP(void (*callback)(unsigned char seconds, void *param),
 		 */
 		if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP) {
 			spin_unlock_irqrestore(&rtc_lock, flags);
-			mdelay(1);
+			udelay(100);
 			continue;
 		}

--- a/drivers/rtc/rtc-mpfs.c
+++ b/drivers/rtc/rtc-mpfs.c
@ -0,0 +1,323 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Microchip MPFS RTC driver
+ *
+ * Copyright (c) 2021-2022 Microchip Corporation. All rights reserved.
+ *
+ * Author: Daire McNamara <daire.mcnamara@microchip.com>
+ *         & Conor Dooley <conor.dooley@microchip.com>
+ */
+#include "linux/bits.h"
+#include "linux/iopoll.h"
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/slab.h>
+#include <linux/rtc.h>
+
+#define CONTROL_REG		0x00
+#define MODE_REG		0x04
+#define PRESCALER_REG		0x08
+#define ALARM_LOWER_REG		0x0c
+#define ALARM_UPPER_REG		0x10
+#define COMPARE_LOWER_REG	0x14
+#define COMPARE_UPPER_REG	0x18
+#define DATETIME_LOWER_REG	0x20
+#define DATETIME_UPPER_REG	0x24
+
+#define CONTROL_RUNNING_BIT	BIT(0)
+#define CONTROL_START_BIT	BIT(0)
+#define CONTROL_STOP_BIT	BIT(1)
+#define CONTROL_ALARM_ON_BIT	BIT(2)
+#define CONTROL_ALARM_OFF_BIT	BIT(3)
+#define CONTROL_RESET_BIT	BIT(4)
+#define CONTROL_UPLOAD_BIT	BIT(5)
+#define CONTROL_DOWNLOAD_BIT	BIT(6)
+#define CONTROL_MATCH_BIT	BIT(7)
+#define CONTROL_WAKEUP_CLR_BIT	BIT(8)
+#define CONTROL_WAKEUP_SET_BIT	BIT(9)
+#define CONTROL_UPDATED_BIT	BIT(10)
+
+#define MODE_CLOCK_CALENDAR	BIT(0)
+#define MODE_WAKE_EN		BIT(1)
+#define MODE_WAKE_RESET		BIT(2)
+#define MODE_WAKE_CONTINUE	BIT(3)
+
+#define MAX_PRESCALER_COUNT	GENMASK(25, 0)
+#define DATETIME_UPPER_MASK	GENMASK(29, 0)
+#define ALARM_UPPER_MASK	GENMASK(10, 0)
+
+#define UPLOAD_TIMEOUT_US	50
+
+struct mpfs_rtc_dev {
+	struct rtc_device *rtc;
+	void __iomem *base;
+};
+
+static void mpfs_rtc_start(struct mpfs_rtc_dev *rtcdev)
+{
+	u32 ctrl;
+
+	ctrl = readl(rtcdev->base + CONTROL_REG);
+	ctrl &= ~CONTROL_STOP_BIT;
+	ctrl |= CONTROL_START_BIT;
+	writel(ctrl, rtcdev->base + CONTROL_REG);
+}
+
+static void mpfs_rtc_clear_irq(struct mpfs_rtc_dev *rtcdev)
+{
+	u32 val = readl(rtcdev->base + CONTROL_REG);
+
+	val &= ~(CONTROL_ALARM_ON_BIT | CONTROL_STOP_BIT);
+	val |= CONTROL_ALARM_OFF_BIT;
+	writel(val, rtcdev->base + CONTROL_REG);
+	/*
+	 * Ensure that the posted write to the CONTROL_REG register completed before
+	 * returning from this function. Not doing this may result in the interrupt
+	 * only being cleared some time after this function returns.
+	 */
+	(void)readl(rtcdev->base + CONTROL_REG);
+}
+
+static int mpfs_rtc_readtime(struct device *dev, struct rtc_time *tm)
+{
+	struct mpfs_rtc_dev *rtcdev = dev_get_drvdata(dev);
+	u64 time;
+
+	time = readl(rtcdev->base + DATETIME_LOWER_REG);
+	time |= ((u64)readl(rtcdev->base + DATETIME_UPPER_REG) & DATETIME_UPPER_MASK) << 32;
+	rtc_time64_to_tm(time, tm);
+
+	return 0;
+}
+
+static int mpfs_rtc_settime(struct device *dev, struct rtc_time *tm)
+{
+	struct mpfs_rtc_dev *rtcdev = dev_get_drvdata(dev);
+	u32 ctrl, prog;
+	u64 time;
+	int ret;
+
+	time = rtc_tm_to_time64(tm);
+
+	writel((u32)time, rtcdev->base + DATETIME_LOWER_REG);
+	writel((u32)(time >> 32) & DATETIME_UPPER_MASK, rtcdev->base + DATETIME_UPPER_REG);
+
+	ctrl = readl(rtcdev->base + CONTROL_REG);
+	ctrl &= ~CONTROL_STOP_BIT;
+	ctrl |= CONTROL_UPLOAD_BIT;
+	writel(ctrl, rtcdev->base + CONTROL_REG);
+
+	ret = read_poll_timeout(readl, prog, prog & CONTROL_UPLOAD_BIT, 0, UPLOAD_TIMEOUT_US,
+				false, rtcdev->base + CONTROL_REG);
+	if (ret) {
+		dev_err(dev, "timed out uploading time to rtc");
+		return ret;
+	}
+	mpfs_rtc_start(rtcdev);
+
+	return 0;
+}
+
+static int mpfs_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct mpfs_rtc_dev *rtcdev = dev_get_drvdata(dev);
+	u32 mode = readl(rtcdev->base + MODE_REG);
+	u64 time;
+
+	alrm->enabled = mode & MODE_WAKE_EN;
+
+	time = (u64)readl(rtcdev->base + ALARM_LOWER_REG) << 32;
+	time |= (readl(rtcdev->base + ALARM_UPPER_REG) & ALARM_UPPER_MASK);
+	rtc_time64_to_tm(time, &alrm->time);
+
+	return 0;
+}
+
+static int mpfs_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+	struct mpfs_rtc_dev *rtcdev = dev_get_drvdata(dev);
+	u32 mode, ctrl;
+	u64 time;
+
+	/* Disable the alarm before updating */
+	ctrl = readl(rtcdev->base + CONTROL_REG);
+	ctrl |= CONTROL_ALARM_OFF_BIT;
+	writel(ctrl, rtcdev->base + CONTROL_REG);
+
+	time = rtc_tm_to_time64(&alrm->time);
+
+	writel((u32)time, rtcdev->base + ALARM_LOWER_REG);
+	writel((u32)(time >> 32) & ALARM_UPPER_MASK, rtcdev->base + ALARM_UPPER_REG);
+
+	/* Bypass compare register in alarm mode */
+	writel(GENMASK(31, 0), rtcdev->base + COMPARE_LOWER_REG);
+	writel(GENMASK(29, 0), rtcdev->base + COMPARE_UPPER_REG);
+
+	/* Configure the RTC to enable the alarm. */
+	ctrl = readl(rtcdev->base + CONTROL_REG);
+	mode = readl(rtcdev->base + MODE_REG);
+	if (alrm->enabled) {
+		mode = MODE_WAKE_EN | MODE_WAKE_CONTINUE;
+		/* Enable the alarm */
+		ctrl &= ~CONTROL_ALARM_OFF_BIT;
+		ctrl |= CONTROL_ALARM_ON_BIT;
+	}
+	ctrl &= ~CONTROL_STOP_BIT;
+	ctrl |= CONTROL_START_BIT;
+	writel(ctrl, rtcdev->base + CONTROL_REG);
+	writel(mode, rtcdev->base + MODE_REG);
+
+	return 0;
+}
+
+static int mpfs_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct mpfs_rtc_dev *rtcdev = dev_get_drvdata(dev);
+	u32 ctrl;
+
+	ctrl = readl(rtcdev->base + CONTROL_REG);
+	ctrl &= ~(CONTROL_ALARM_ON_BIT | CONTROL_ALARM_OFF_BIT | CONTROL_STOP_BIT);
+
+	if (enabled)
+		ctrl |= CONTROL_ALARM_ON_BIT;
+	else
+		ctrl |= CONTROL_ALARM_OFF_BIT;
+
+	writel(ctrl, rtcdev->base + CONTROL_REG);
+
+	return 0;
+}
+
+static inline struct clk *mpfs_rtc_init_clk(struct device *dev)
+{
+	struct clk *clk;
+	int ret;
+
+	clk = devm_clk_get(dev, "rtc");
+	if (IS_ERR(clk))
+		return clk;
+
+	ret = clk_prepare_enable(clk);
+	if (ret)
+		return ERR_PTR(ret);
+
+	devm_add_action_or_reset(dev, (void (*) (void *))clk_disable_unprepare, clk);
+	return clk;
+}
+
+static irqreturn_t mpfs_rtc_wakeup_irq_handler(int irq, void *dev)
+{
+	struct mpfs_rtc_dev *rtcdev = dev;
+
+	mpfs_rtc_clear_irq(rtcdev);
+
+	rtc_update_irq(rtcdev->rtc, 1, RTC_IRQF | RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops mpfs_rtc_ops = {
+	.read_time		= mpfs_rtc_readtime,
+	.set_time		= mpfs_rtc_settime,
+	.read_alarm		= mpfs_rtc_readalarm,
+	.set_alarm		= mpfs_rtc_setalarm,
+	.alarm_irq_enable	= mpfs_rtc_alarm_irq_enable,
+};
+
+static int mpfs_rtc_probe(struct platform_device *pdev)
+{
+	struct mpfs_rtc_dev *rtcdev;
+	struct clk *clk;
+	u32 prescaler;
+	int wakeup_irq, ret;
+
+	rtcdev = devm_kzalloc(&pdev->dev, sizeof(struct mpfs_rtc_dev), GFP_KERNEL);
+	if (!rtcdev)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, rtcdev);
+
+	rtcdev->rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(rtcdev->rtc))
+		return PTR_ERR(rtcdev->rtc);
+
+	rtcdev->rtc->ops = &mpfs_rtc_ops;
+
+	/* range is capped by alarm max, lower reg is 31:0 & upper is 10:0 */
+	rtcdev->rtc->range_max = GENMASK_ULL(42, 0);
+
+	clk = mpfs_rtc_init_clk(&pdev->dev);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	rtcdev->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(rtcdev->base)) {
+		dev_dbg(&pdev->dev, "invalid ioremap resources\n");
+		return PTR_ERR(rtcdev->base);
+	}
+
+	wakeup_irq = platform_get_irq(pdev, 0);
+	if (wakeup_irq <= 0) {
+		dev_dbg(&pdev->dev, "could not get wakeup irq\n");
+		return wakeup_irq;
+	}
+	ret = devm_request_irq(&pdev->dev, wakeup_irq, mpfs_rtc_wakeup_irq_handler, 0,
+			       dev_name(&pdev->dev), rtcdev);
+	if (ret) {
+		dev_dbg(&pdev->dev, "could not request wakeup irq\n");
+		return ret;
+	}
+
+	/* prescaler hardware adds 1 to reg value */
+	prescaler = clk_get_rate(devm_clk_get(&pdev->dev, "rtcref")) - 1;
+
+	if (prescaler > MAX_PRESCALER_COUNT) {
+		dev_dbg(&pdev->dev, "invalid prescaler %d\n", prescaler);
+		return -EINVAL;
+	}
+
+	writel(prescaler, rtcdev->base + PRESCALER_REG);
+	dev_info(&pdev->dev, "prescaler set to: 0x%X \r\n", prescaler);
+
+	device_init_wakeup(&pdev->dev, true);
+	ret = dev_pm_set_wake_irq(&pdev->dev, wakeup_irq);
+	if (ret)
+		dev_err(&pdev->dev, "failed to enable irq wake\n");
+
+	return devm_rtc_register_device(rtcdev->rtc);
+}
+
+static int mpfs_rtc_remove(struct platform_device *pdev)
+{
+	dev_pm_clear_wake_irq(&pdev->dev);
+
+	return 0;
+}
+
+static const struct of_device_id mpfs_rtc_of_match[] = {
+	{ .compatible = "microchip,mpfs-rtc" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, mpfs_rtc_of_match);
+
+static struct platform_driver mpfs_rtc_driver = {
+	.probe = mpfs_rtc_probe,
+	.remove = mpfs_rtc_remove,
+	.driver	= {
+		.name = "mpfs_rtc",
+		.of_match_table = mpfs_rtc_of_match,
+	},
+};
+
+module_platform_driver(mpfs_rtc_driver);
+
+MODULE_DESCRIPTION("Real time clock for Microchip Polarfire SoC");
+MODULE_AUTHOR("Daire McNamara <daire.mcnamara@microchip.com>");
+MODULE_AUTHOR("Conor Dooley <conor.dooley@microchip.com>");
+MODULE_LICENSE("GPL");
--- a/drivers/rtc/rtc-nct3018y.c
+++ b/drivers/rtc/rtc-nct3018y.c
@ -0,0 +1,553 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2022 Nuvoton Technology Corporation
+
+#include <linux/bcd.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+
+#define NCT3018Y_REG_SC		0x00 /* seconds */
+#define NCT3018Y_REG_SCA	0x01 /* alarm */
+#define NCT3018Y_REG_MN		0x02
+#define NCT3018Y_REG_MNA	0x03 /* alarm */
+#define NCT3018Y_REG_HR		0x04
+#define NCT3018Y_REG_HRA	0x05 /* alarm */
+#define NCT3018Y_REG_DW		0x06
+#define NCT3018Y_REG_DM		0x07
+#define NCT3018Y_REG_MO		0x08
+#define NCT3018Y_REG_YR		0x09
+#define NCT3018Y_REG_CTRL	0x0A /* timer control */
+#define NCT3018Y_REG_ST		0x0B /* status */
+#define NCT3018Y_REG_CLKO	0x0C /* clock out */
+
+#define NCT3018Y_BIT_AF		BIT(7)
+#define NCT3018Y_BIT_ST		BIT(7)
+#define NCT3018Y_BIT_DM		BIT(6)
+#define NCT3018Y_BIT_HF		BIT(5)
+#define NCT3018Y_BIT_DSM	BIT(4)
+#define NCT3018Y_BIT_AIE	BIT(3)
+#define NCT3018Y_BIT_OFIE	BIT(2)
+#define NCT3018Y_BIT_CIE	BIT(1)
+#define NCT3018Y_BIT_TWO	BIT(0)
+
+#define NCT3018Y_REG_BAT_MASK		0x07
+#define NCT3018Y_REG_CLKO_F_MASK	0x03 /* frequenc mask */
+#define NCT3018Y_REG_CLKO_CKE		0x80 /* clock out enabled */
+
+struct nct3018y {
+	struct rtc_device *rtc;
+	struct i2c_client *client;
+#ifdef CONFIG_COMMON_CLK
+	struct clk_hw clkout_hw;
+#endif
+};
+
+static int nct3018y_set_alarm_mode(struct i2c_client *client, bool on)
+{
+	int err, flags;
+
+	dev_dbg(&client->dev, "%s:on:%d\n", __func__, on);
+
+	flags =  i2c_smbus_read_byte_data(client, NCT3018Y_REG_CTRL);
+	if (flags < 0) {
+		dev_dbg(&client->dev,
+			"Failed to read NCT3018Y_REG_CTRL\n");
+		return flags;
+	}
+
+	if (on)
+		flags |= NCT3018Y_BIT_AIE;
+	else
+		flags &= ~NCT3018Y_BIT_AIE;
+
+	flags |= NCT3018Y_BIT_CIE;
+	err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_CTRL, flags);
+	if (err < 0) {
+		dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_CTRL\n");
+		return err;
+	}
+
+	flags =  i2c_smbus_read_byte_data(client, NCT3018Y_REG_ST);
+	if (flags < 0) {
+		dev_dbg(&client->dev,
+			"Failed to read NCT3018Y_REG_ST\n");
+		return flags;
+	}
+
+	flags &= ~(NCT3018Y_BIT_AF);
+	err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_ST, flags);
+	if (err < 0) {
+		dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_ST\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int nct3018y_get_alarm_mode(struct i2c_client *client, unsigned char *alarm_enable,
+				   unsigned char *alarm_flag)
+{
+	int flags;
+
+	if (alarm_enable) {
+		dev_dbg(&client->dev, "%s:NCT3018Y_REG_CTRL\n", __func__);
+		flags =  i2c_smbus_read_byte_data(client, NCT3018Y_REG_CTRL);
+		if (flags < 0)
+			return flags;
+		*alarm_enable = flags & NCT3018Y_BIT_AIE;
+	}
+
+	if (alarm_flag) {
+		dev_dbg(&client->dev, "%s:NCT3018Y_REG_ST\n", __func__);
+		flags =  i2c_smbus_read_byte_data(client, NCT3018Y_REG_ST);
+		if (flags < 0)
+			return flags;
+		*alarm_flag = flags & NCT3018Y_BIT_AF;
+	}
+
+	dev_dbg(&client->dev, "%s:alarm_enable:%x alarm_flag:%x\n",
+		__func__, *alarm_enable, *alarm_flag);
+
+	return 0;
+}
+
+static irqreturn_t nct3018y_irq(int irq, void *dev_id)
+{
+	struct nct3018y *nct3018y = i2c_get_clientdata(dev_id);
+	struct i2c_client *client = nct3018y->client;
+	int err;
+	unsigned char alarm_flag;
+	unsigned char alarm_enable;
+
+	dev_dbg(&client->dev, "%s:irq:%d\n", __func__, irq);
+	err = nct3018y_get_alarm_mode(nct3018y->client, &alarm_enable, &alarm_flag);
+	if (err)
+		return IRQ_NONE;
+
+	if (alarm_flag) {
+		dev_dbg(&client->dev, "%s:alarm flag:%x\n",
+			__func__, alarm_flag);
+		rtc_update_irq(nct3018y->rtc, 1, RTC_IRQF | RTC_AF);
+		nct3018y_set_alarm_mode(nct3018y->client, 0);
+		dev_dbg(&client->dev, "%s:IRQ_HANDLED\n", __func__);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+/*
+ * In the routines that deal directly with the nct3018y hardware, we use
+ * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
+ */
+static int nct3018y_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned char buf[10];
+	int err;
+
+	err = i2c_smbus_read_i2c_block_data(client, NCT3018Y_REG_ST, 1, buf);
+	if (err < 0)
+		return err;
+
+	if (!buf[0]) {
+		dev_dbg(&client->dev, " voltage <=1.7, date/time is not reliable.\n");
+		return -EINVAL;
+	}
+
+	err = i2c_smbus_read_i2c_block_data(client, NCT3018Y_REG_SC, sizeof(buf), buf);
+	if (err < 0)
+		return err;
+
+	tm->tm_sec = bcd2bin(buf[0] & 0x7F);
+	tm->tm_min = bcd2bin(buf[2] & 0x7F);
+	tm->tm_hour = bcd2bin(buf[4] & 0x3F);
+	tm->tm_wday = buf[6] & 0x07;
+	tm->tm_mday = bcd2bin(buf[7] & 0x3F);
+	tm->tm_mon = bcd2bin(buf[8] & 0x1F) - 1;
+	tm->tm_year = bcd2bin(buf[9]) + 100;
+
+	return 0;
+}
+
+static int nct3018y_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned char buf[4] = {0};
+	int err;
+
+	buf[0] = bin2bcd(tm->tm_sec);
+	err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_SC, buf[0]);
+	if (err < 0) {
+		dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_SC\n");
+		return err;
+	}
+
+	buf[0] = bin2bcd(tm->tm_min);
+	err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_MN, buf[0]);
+	if (err < 0) {
+		dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_MN\n");
+		return err;
+	}
+
+	buf[0] = bin2bcd(tm->tm_hour);
+	err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_HR, buf[0]);
+	if (err < 0) {
+		dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_HR\n");
+		return err;
+	}
+
+	buf[0] = tm->tm_wday & 0x07;
+	buf[1] = bin2bcd(tm->tm_mday);
+	buf[2] = bin2bcd(tm->tm_mon + 1);
+	buf[3] = bin2bcd(tm->tm_year - 100);
+	err = i2c_smbus_write_i2c_block_data(client, NCT3018Y_REG_DW,
+					     sizeof(buf), buf);
+	if (err < 0) {
+		dev_dbg(&client->dev, "Unable to write for day and mon and year\n");
+		return -EIO;
+	}
+
+	return err;
+}
+
+static int nct3018y_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned char buf[5];
+	int err;
+
+	err = i2c_smbus_read_i2c_block_data(client, NCT3018Y_REG_SCA,
+					    sizeof(buf), buf);
+	if (err < 0) {
+		dev_dbg(&client->dev, "Unable to read date\n");
+		return -EIO;
+	}
+
+	dev_dbg(&client->dev, "%s: raw data is sec=%02x, min=%02x hr=%02x\n",
+		__func__, buf[0], buf[2], buf[4]);
+
+	tm->time.tm_sec = bcd2bin(buf[0] & 0x7F);
+	tm->time.tm_min = bcd2bin(buf[2] & 0x7F);
+	tm->time.tm_hour = bcd2bin(buf[4] & 0x3F);
+
+	err = nct3018y_get_alarm_mode(client, &tm->enabled, &tm->pending);
+	if (err < 0)
+		return err;
+
+	dev_dbg(&client->dev, "%s:s=%d m=%d, hr=%d, enabled=%d, pending=%d\n",
+		__func__, tm->time.tm_sec, tm->time.tm_min,
+		tm->time.tm_hour, tm->enabled, tm->pending);
+
+	return 0;
+}
+
+static int nct3018y_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *tm)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int err;
+
+	dev_dbg(dev, "%s, sec=%d, min=%d hour=%d tm->enabled:%d\n",
+		__func__, tm->time.tm_sec, tm->time.tm_min, tm->time.tm_hour,
+		tm->enabled);
+
+	err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_SCA, bin2bcd(tm->time.tm_sec));
+	if (err < 0) {
+		dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_SCA\n");
+		return err;
+	}
+
+	err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_MNA, bin2bcd(tm->time.tm_min));
+	if (err < 0) {
+		dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_MNA\n");
+		return err;
+	}
+
+	err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_HRA, bin2bcd(tm->time.tm_hour));
+	if (err < 0) {
+		dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_HRA\n");
+		return err;
+	}
+
+	return nct3018y_set_alarm_mode(client, tm->enabled);
+}
+
+static int nct3018y_irq_enable(struct device *dev, unsigned int enabled)
+{
+	dev_dbg(dev, "%s: alarm enable=%d\n", __func__, enabled);
+
+	return nct3018y_set_alarm_mode(to_i2c_client(dev), enabled);
+}
+
+static int nct3018y_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int status, flags = 0;
+
+	switch (cmd) {
+	case RTC_VL_READ:
+		status = i2c_smbus_read_byte_data(client, NCT3018Y_REG_ST);
+		if (status < 0)
+			return status;
+
+		if (!(status & NCT3018Y_REG_BAT_MASK))
+			flags |= RTC_VL_DATA_INVALID;
+
+		return put_user(flags, (unsigned int __user *)arg);
+
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+
+#ifdef CONFIG_COMMON_CLK
+/*
+ * Handling of the clkout
+ */
+
+#define clkout_hw_to_nct3018y(_hw) container_of(_hw, struct nct3018y, clkout_hw)
+
+static const int clkout_rates[] = {
+	32768,
+	1024,
+	32,
+	1,
+};
+
+static unsigned long nct3018y_clkout_recalc_rate(struct clk_hw *hw,
+						 unsigned long parent_rate)
+{
+	struct nct3018y *nct3018y = clkout_hw_to_nct3018y(hw);
+	struct i2c_client *client = nct3018y->client;
+	int flags;
+
+	flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CLKO);
+	if (flags < 0)
+		return 0;
+
+	flags &= NCT3018Y_REG_CLKO_F_MASK;
+	return clkout_rates[flags];
+}
+
+static long nct3018y_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
+				       unsigned long *prate)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
+		if (clkout_rates[i] <= rate)
+			return clkout_rates[i];
+
+	return 0;
+}
+
+static int nct3018y_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long parent_rate)
+{
+	struct nct3018y *nct3018y = clkout_hw_to_nct3018y(hw);
+	struct i2c_client *client = nct3018y->client;
+	int i, flags;
+
+	flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CLKO);
+	if (flags < 0)
+		return flags;
+
+	for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
+		if (clkout_rates[i] == rate) {
+			flags &= ~NCT3018Y_REG_CLKO_F_MASK;
+			flags |= i;
+			return i2c_smbus_write_byte_data(client, NCT3018Y_REG_CLKO, flags);
+		}
+
+	return -EINVAL;
+}
+
+static int nct3018y_clkout_control(struct clk_hw *hw, bool enable)
+{
+	struct nct3018y *nct3018y = clkout_hw_to_nct3018y(hw);
+	struct i2c_client *client = nct3018y->client;
+	int flags;
+
+	flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CLKO);
+	if (flags < 0)
+		return flags;
+
+	if (enable)
+		flags |= NCT3018Y_REG_CLKO_CKE;
+	else
+		flags &= ~NCT3018Y_REG_CLKO_CKE;
+
+	return i2c_smbus_write_byte_data(client, NCT3018Y_REG_CLKO, flags);
+}
+
+static int nct3018y_clkout_prepare(struct clk_hw *hw)
+{
+	return nct3018y_clkout_control(hw, 1);
+}
+
+static void nct3018y_clkout_unprepare(struct clk_hw *hw)
+{
+	nct3018y_clkout_control(hw, 0);
+}
+
+static int nct3018y_clkout_is_prepared(struct clk_hw *hw)
+{
+	struct nct3018y *nct3018y = clkout_hw_to_nct3018y(hw);
+	struct i2c_client *client = nct3018y->client;
+	int flags;
+
+	flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CLKO);
+	if (flags < 0)
+		return flags;
+
+	return flags & NCT3018Y_REG_CLKO_CKE;
+}
+
+static const struct clk_ops nct3018y_clkout_ops = {
+	.prepare = nct3018y_clkout_prepare,
+	.unprepare = nct3018y_clkout_unprepare,
+	.is_prepared = nct3018y_clkout_is_prepared,
+	.recalc_rate = nct3018y_clkout_recalc_rate,
+	.round_rate = nct3018y_clkout_round_rate,
+	.set_rate = nct3018y_clkout_set_rate,
+};
+
+static struct clk *nct3018y_clkout_register_clk(struct nct3018y *nct3018y)
+{
+	struct i2c_client *client = nct3018y->client;
+	struct device_node *node = client->dev.of_node;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	init.name = "nct3018y-clkout";
+	init.ops = &nct3018y_clkout_ops;
+	init.flags = 0;
+	init.parent_names = NULL;
+	init.num_parents = 0;
+	nct3018y->clkout_hw.init = &init;
+
+	/* optional override of the clockname */
+	of_property_read_string(node, "clock-output-names", &init.name);
+
+	/* register the clock */
+	clk = devm_clk_register(&client->dev, &nct3018y->clkout_hw);
+
+	if (!IS_ERR(clk))
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+
+	return clk;
+}
+#endif
+
+static const struct rtc_class_ops nct3018y_rtc_ops = {
+	.read_time	= nct3018y_rtc_read_time,
+	.set_time	= nct3018y_rtc_set_time,
+	.read_alarm	= nct3018y_rtc_read_alarm,
+	.set_alarm	= nct3018y_rtc_set_alarm,
+	.alarm_irq_enable = nct3018y_irq_enable,
+	.ioctl		= nct3018y_ioctl,
+};
+
+static int nct3018y_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct nct3018y *nct3018y;
+	int err, flags;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
+				     I2C_FUNC_SMBUS_BYTE |
+				     I2C_FUNC_SMBUS_BLOCK_DATA))
+		return -ENODEV;
+
+	nct3018y = devm_kzalloc(&client->dev, sizeof(struct nct3018y),
+				GFP_KERNEL);
+	if (!nct3018y)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, nct3018y);
+	nct3018y->client = client;
+	device_set_wakeup_capable(&client->dev, 1);
+
+	flags = i2c_smbus_read_byte_data(client, NCT3018Y_REG_CTRL);
+	if (flags < 0) {
+		dev_dbg(&client->dev, "%s: read error\n", __func__);
+		return flags;
+	} else if (flags & NCT3018Y_BIT_TWO) {
+		dev_dbg(&client->dev, "%s: NCT3018Y_BIT_TWO is set\n", __func__);
+	}
+
+	flags = NCT3018Y_BIT_TWO;
+	err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_CTRL, flags);
+	if (err < 0) {
+		dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_CTRL\n");
+		return err;
+	}
+
+	flags = 0;
+	err = i2c_smbus_write_byte_data(client, NCT3018Y_REG_ST, flags);
+	if (err < 0) {
+		dev_dbg(&client->dev, "%s: write error\n", __func__);
+		return err;
+	}
+
+	nct3018y->rtc = devm_rtc_allocate_device(&client->dev);
+	if (IS_ERR(nct3018y->rtc))
+		return PTR_ERR(nct3018y->rtc);
+
+	nct3018y->rtc->ops = &nct3018y_rtc_ops;
+	nct3018y->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+	nct3018y->rtc->range_max = RTC_TIMESTAMP_END_2099;
+
+	if (client->irq > 0) {
+		err = devm_request_threaded_irq(&client->dev, client->irq,
+						NULL, nct3018y_irq,
+						IRQF_ONESHOT | IRQF_TRIGGER_FALLING,
+						"nct3018y", client);
+		if (err) {
+			dev_dbg(&client->dev, "unable to request IRQ %d\n", client->irq);
+			return err;
+		}
+	} else {
+		clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, nct3018y->rtc->features);
+		clear_bit(RTC_FEATURE_ALARM, nct3018y->rtc->features);
+	}
+
+#ifdef CONFIG_COMMON_CLK
+	/* register clk in common clk framework */
+	nct3018y_clkout_register_clk(nct3018y);
+#endif
+
+	return devm_rtc_register_device(nct3018y->rtc);
+}
+
+static const struct i2c_device_id nct3018y_id[] = {
+	{ "nct3018y", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, nct3018y_id);
+
+static const struct of_device_id nct3018y_of_match[] = {
+	{ .compatible = "nuvoton,nct3018y" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, nct3018y_of_match);
+
+static struct i2c_driver nct3018y_driver = {
+	.driver		= {
+		.name	= "rtc-nct3018y",
+		.of_match_table = of_match_ptr(nct3018y_of_match),
+	},
+	.probe		= nct3018y_probe,
+	.id_table	= nct3018y_id,
+};
+
+module_i2c_driver(nct3018y_driver);
+
+MODULE_AUTHOR("Medad CChien <ctcchien@nuvoton.com>");
+MODULE_AUTHOR("Mia Lin <mimi05633@gmail.com>");
+MODULE_DESCRIPTION("Nuvoton NCT3018Y RTC driver");
+MODULE_LICENSE("GPL");
--- a/drivers/rtc/rtc-pcf8523.c
+++ b/drivers/rtc/rtc-pcf8523.c
@ -390,8 +390,7 @@ static const struct regmap_config regmap_config = {
        .max_register = 0x13,
 };

-static int pcf8523_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+static int pcf8523_probe(struct i2c_client *client)
 {
 	struct pcf8523 *pcf8523;
 	struct rtc_device *rtc;
@ -485,7 +484,7 @@ static struct i2c_driver pcf8523_driver = {
 		.name = "rtc-pcf8523",
 		.of_match_table = pcf8523_of_match,
 	},
-	.probe = pcf8523_probe,
+	.probe_new = pcf8523_probe,
 	.id_table = pcf8523_id,
 };
 module_i2c_driver(pcf8523_driver);
--- a/drivers/rtc/rtc-pcf85363.c
+++ b/drivers/rtc/rtc-pcf85363.c
@ -350,8 +350,7 @@ static const struct pcf85x63_config pcf_85363_config = {
 	.num_nvram = 2
 };

-static int pcf85363_probe(struct i2c_client *client,
-			  const struct i2c_device_id *id)
+static int pcf85363_probe(struct i2c_client *client)
 {
 	struct pcf85363 *pcf85363;
 	const struct pcf85x63_config *config = &pcf_85363_config;
@ -436,7 +435,7 @@ static struct i2c_driver pcf85363_driver = {
 		.name	= "pcf85363",
 		.of_match_table = of_match_ptr(dev_ids),
 	},
-	.probe	= pcf85363_probe,
+	.probe_new = pcf85363_probe,
 };

 module_i2c_driver(pcf85363_driver);
--- a/drivers/rtc/rtc-pcf8563.c
+++ b/drivers/rtc/rtc-pcf8563.c
@ -509,8 +509,7 @@ static const struct rtc_class_ops pcf8563_rtc_ops = {
 	.alarm_irq_enable = pcf8563_irq_enable,
 };

-static int pcf8563_probe(struct i2c_client *client,
-				const struct i2c_device_id *id)
+static int pcf8563_probe(struct i2c_client *client)
 {
 	struct pcf8563 *pcf8563;
 	int err;
@ -606,7 +605,7 @@ static struct i2c_driver pcf8563_driver = {
 		.name	= "rtc-pcf8563",
 		.of_match_table = of_match_ptr(pcf8563_of_match),
 	},
-	.probe		= pcf8563_probe,
+	.probe_new	= pcf8563_probe,
 	.id_table	= pcf8563_id,
 };

--- a/drivers/rtc/rtc-pcf8583.c
+++ b/drivers/rtc/rtc-pcf8583.c
@ -275,8 +275,7 @@ static const struct rtc_class_ops pcf8583_rtc_ops = {
 	.set_time	= pcf8583_rtc_set_time,
 };

-static int pcf8583_probe(struct i2c_client *client,
-				const struct i2c_device_id *id)
+static int pcf8583_probe(struct i2c_client *client)
 {
 	struct pcf8583 *pcf8583;

@ -307,7 +306,7 @@ static struct i2c_driver pcf8583_driver = {
 	.driver = {
 		.name	= "pcf8583",
 	},
-	.probe		= pcf8583_probe,
+	.probe_new	= pcf8583_probe,
 	.id_table	= pcf8583_id,
 };

--- a/drivers/rtc/rtc-rv3029c2.c
+++ b/drivers/rtc/rtc-rv3029c2.c
@ -784,8 +784,7 @@ static const struct regmap_config config = {

 #if IS_ENABLED(CONFIG_I2C)

-static int rv3029_i2c_probe(struct i2c_client *client,
-			    const struct i2c_device_id *id)
+static int rv3029_i2c_probe(struct i2c_client *client)
 {
 	struct regmap *regmap;
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK |
@ -819,7 +818,7 @@ static struct i2c_driver rv3029_driver = {
 		.name = "rv3029",
 		.of_match_table = of_match_ptr(rv3029_of_match),
 	},
-	.probe		= rv3029_i2c_probe,
+	.probe_new	= rv3029_i2c_probe,
 	.id_table	= rv3029_id,
 };

--- a/drivers/rtc/rtc-rv8803.c
+++ b/drivers/rtc/rtc-rv8803.c
@ -9,6 +9,7 @@

 #include <linux/bcd.h>
 #include <linux/bitops.h>
+#include <linux/bitfield.h>
 #include <linux/log2.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
@ -33,6 +34,7 @@
 #define RV8803_EXT			0x0D
 #define RV8803_FLAG			0x0E
 #define RV8803_CTRL			0x0F
+#define RV8803_OSC_OFFSET		0x2C

 #define RV8803_EXT_WADA			BIT(6)

@ -49,12 +51,15 @@
 #define RV8803_CTRL_TIE			BIT(4)
 #define RV8803_CTRL_UIE			BIT(5)

+#define RX8803_CTRL_CSEL		GENMASK(7, 6)
+
 #define RX8900_BACKUP_CTRL		0x18
 #define RX8900_FLAG_SWOFF		BIT(2)
 #define RX8900_FLAG_VDETOFF		BIT(3)

 enum rv8803_type {
 	rv_8803,
+	rx_8803,
 	rx_8804,
 	rx_8900
 };
@ -64,6 +69,7 @@ struct rv8803_data {
 	struct rtc_device *rtc;
 	struct mutex flags_lock;
 	u8 ctrl;
+	u8 backup;
 	enum rv8803_type type;
 };

@ -136,6 +142,44 @@ static int rv8803_write_regs(const struct i2c_client *client,
 	return ret;
 }

+static int rv8803_regs_init(struct rv8803_data *rv8803)
+{
+	int ret;
+
+	ret = rv8803_write_reg(rv8803->client, RV8803_OSC_OFFSET, 0x00);
+	if (ret)
+		return ret;
+
+	ret = rv8803_write_reg(rv8803->client, RV8803_CTRL,
+			       FIELD_PREP(RX8803_CTRL_CSEL, 1)); /* 2s */
+	if (ret)
+		return ret;
+
+	ret = rv8803_write_regs(rv8803->client, RV8803_ALARM_MIN, 3,
+				(u8[]){ 0, 0, 0 });
+	if (ret)
+		return ret;
+
+	return rv8803_write_reg(rv8803->client, RV8803_RAM, 0x00);
+}
+
+static int rv8803_regs_configure(struct rv8803_data *rv8803);
+
+static int rv8803_regs_reset(struct rv8803_data *rv8803)
+{
+	/*
+	 * The RV-8803 resets all registers to POR defaults after voltage-loss,
+	 * the Epson RTCs don't, so we manually reset the remainder here.
+	 */
+	if (rv8803->type == rx_8803 || rv8803->type == rx_8900) {
+		int ret = rv8803_regs_init(rv8803);
+		if (ret)
+			return ret;
+	}
+
+	return rv8803_regs_configure(rv8803);
+}
+
 static irqreturn_t rv8803_handle_irq(int irq, void *dev_id)
 {
 	struct i2c_client *client = dev_id;
@ -269,6 +313,14 @@ static int rv8803_set_time(struct device *dev, struct rtc_time *tm)
 		return flags;
 	}

+	if (flags & RV8803_FLAG_V2F) {
+		ret = rv8803_regs_reset(rv8803);
+		if (ret) {
+			mutex_unlock(&rv8803->flags_lock);
+			return ret;
+		}
+	}
+
 	ret = rv8803_write_reg(rv8803->client, RV8803_FLAG,
 			       flags & ~(RV8803_FLAG_V1F | RV8803_FLAG_V2F));

@ -498,18 +550,32 @@ static int rx8900_trickle_charger_init(struct rv8803_data *rv8803)
 	if (err < 0)
 		return err;

-	flags = ~(RX8900_FLAG_VDETOFF | RX8900_FLAG_SWOFF) & (u8)err;
-
-	if (of_property_read_bool(node, "epson,vdet-disable"))
-		flags |= RX8900_FLAG_VDETOFF;
-
-	if (of_property_read_bool(node, "trickle-diode-disable"))
-		flags |= RX8900_FLAG_SWOFF;
+	flags = (u8)err;
+	flags &= ~(RX8900_FLAG_VDETOFF | RX8900_FLAG_SWOFF);
+	flags |= rv8803->backup;

 	return i2c_smbus_write_byte_data(rv8803->client, RX8900_BACKUP_CTRL,
 					 flags);
 }

+/* configure registers with values different than the Power-On reset defaults */
+static int rv8803_regs_configure(struct rv8803_data *rv8803)
+{
+	int err;
+
+	err = rv8803_write_reg(rv8803->client, RV8803_EXT, RV8803_EXT_WADA);
+	if (err)
+		return err;
+
+	err = rx8900_trickle_charger_init(rv8803);
+	if (err) {
+		dev_err(&rv8803->client->dev, "failed to init charger\n");
+		return err;
+	}
+
+	return 0;
+}
+
 static int rv8803_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
@ -576,16 +642,16 @@ static int rv8803_probe(struct i2c_client *client,
 	if (!client->irq)
 		clear_bit(RTC_FEATURE_ALARM, rv8803->rtc->features);

-	err = rv8803_write_reg(rv8803->client, RV8803_EXT, RV8803_EXT_WADA);
+	if (of_property_read_bool(client->dev.of_node, "epson,vdet-disable"))
+		rv8803->backup |= RX8900_FLAG_VDETOFF;
+
+	if (of_property_read_bool(client->dev.of_node, "trickle-diode-disable"))
+		rv8803->backup |= RX8900_FLAG_SWOFF;
+
+	err = rv8803_regs_configure(rv8803);
 	if (err)
 		return err;

-	err = rx8900_trickle_charger_init(rv8803);
-	if (err) {
-		dev_err(&client->dev, "failed to init charger\n");
-		return err;
-	}
-
 	rv8803->rtc->ops = &rv8803_rtc_ops;
 	rv8803->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
 	rv8803->rtc->range_max = RTC_TIMESTAMP_END_2099;
@ -603,7 +669,7 @@ static int rv8803_probe(struct i2c_client *client,
 static const struct i2c_device_id rv8803_id[] = {
 	{ "rv8803", rv_8803 },
 	{ "rv8804", rx_8804 },
-	{ "rx8803", rv_8803 },
+	{ "rx8803", rx_8803 },
 	{ "rx8900", rx_8900 },
 	{ }
 };
@ -616,7 +682,7 @@ static const __maybe_unused struct of_device_id rv8803_of_match[] = {
 	},
 	{
 		.compatible = "epson,rx8803",
-		.data = (void *)rv_8803
+		.data = (void *)rx_8803
 	},
 	{
 		.compatible = "epson,rx8804",
--- a/drivers/rtc/rtc-rx6110.c
+++ b/drivers/rtc/rtc-rx6110.c
@ -419,8 +419,7 @@ static struct regmap_config regmap_i2c_config = {
 	.read_flag_mask = 0x80,
 };

-static int rx6110_i2c_probe(struct i2c_client *client,
-			    const struct i2c_device_id *id)
+static int rx6110_i2c_probe(struct i2c_client *client)
 {
 	struct i2c_adapter *adapter = client->adapter;
 	struct rx6110_data *rx6110;
@ -464,7 +463,7 @@ static struct i2c_driver rx6110_i2c_driver = {
 		.name = RX6110_DRIVER_NAME,
 		.acpi_match_table = rx6110_i2c_acpi_match,
 	},
-	.probe		= rx6110_i2c_probe,
+	.probe_new	= rx6110_i2c_probe,
 	.id_table	= rx6110_i2c_id,
 };

--- a/drivers/rtc/rtc-rx8025.c
+++ b/drivers/rtc/rtc-rx8025.c
@ -55,6 +55,8 @@
 #define RX8025_BIT_CTRL2_XST	BIT(5)
 #define RX8025_BIT_CTRL2_VDET	BIT(6)

+#define RX8035_BIT_HOUR_1224	BIT(7)
+
 /* Clock precision adjustment */
 #define RX8025_ADJ_RESOLUTION	3050 /* in ppb */
 #define RX8025_ADJ_DATA_MAX	62
@ -78,6 +80,7 @@ struct rx8025_data {
 	struct rtc_device *rtc;
 	enum rx_model model;
 	u8 ctrl1;
+	int is_24;
 };

 static s32 rx8025_read_reg(const struct i2c_client *client, u8 number)
@ -226,7 +229,7 @@ static int rx8025_get_time(struct device *dev, struct rtc_time *dt)

 	dt->tm_sec = bcd2bin(date[RX8025_REG_SEC] & 0x7f);
 	dt->tm_min = bcd2bin(date[RX8025_REG_MIN] & 0x7f);
-	if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
+	if (rx8025->is_24)
 		dt->tm_hour = bcd2bin(date[RX8025_REG_HOUR] & 0x3f);
 	else
 		dt->tm_hour = bcd2bin(date[RX8025_REG_HOUR] & 0x1f) % 12
@ -254,7 +257,7 @@ static int rx8025_set_time(struct device *dev, struct rtc_time *dt)
 	 */
 	date[RX8025_REG_SEC] = bin2bcd(dt->tm_sec);
 	date[RX8025_REG_MIN] = bin2bcd(dt->tm_min);
-	if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
+	if (rx8025->is_24)
 		date[RX8025_REG_HOUR] = bin2bcd(dt->tm_hour);
 	else
 		date[RX8025_REG_HOUR] = (dt->tm_hour >= 12 ? 0x20 : 0)
@ -279,6 +282,7 @@ static int rx8025_init_client(struct i2c_client *client)
 	struct rx8025_data *rx8025 = i2c_get_clientdata(client);
 	u8 ctrl[2], ctrl2;
 	int need_clear = 0;
+	int hour_reg;
 	int err;

 	err = rx8025_read_regs(client, RX8025_REG_CTRL1, 2, ctrl);
@ -303,6 +307,16 @@ static int rx8025_init_client(struct i2c_client *client)

 		err = rx8025_write_reg(client, RX8025_REG_CTRL2, ctrl2);
 	}
+
+	if (rx8025->model == model_rx_8035) {
+		/* In RX-8035, 12/24 flag is in the hour register */
+		hour_reg = rx8025_read_reg(client, RX8025_REG_HOUR);
+		if (hour_reg < 0)
+			return hour_reg;
+		rx8025->is_24 = (hour_reg & RX8035_BIT_HOUR_1224);
+	} else {
+		rx8025->is_24 = (ctrl[1] & RX8025_BIT_CTRL1_1224);
+	}
 out:
 	return err;
 }
@ -329,7 +343,7 @@ static int rx8025_read_alarm(struct device *dev, struct rtc_wkalrm *t)
 	/* Hardware alarms precision is 1 minute! */
 	t->time.tm_sec = 0;
 	t->time.tm_min = bcd2bin(ald[0] & 0x7f);
-	if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
+	if (rx8025->is_24)
 		t->time.tm_hour = bcd2bin(ald[1] & 0x3f);
 	else
 		t->time.tm_hour = bcd2bin(ald[1] & 0x1f) % 12
@ -350,7 +364,7 @@ static int rx8025_set_alarm(struct device *dev, struct rtc_wkalrm *t)
 	int err;

 	ald[0] = bin2bcd(t->time.tm_min);
-	if (rx8025->ctrl1 & RX8025_BIT_CTRL1_1224)
+	if (rx8025->is_24)
 		ald[1] = bin2bcd(t->time.tm_hour);
 	else
 		ald[1] = (t->time.tm_hour >= 12 ? 0x20 : 0)
--- a/drivers/rtc/rtc-rx8581.c
+++ b/drivers/rtc/rtc-rx8581.c
@ -248,8 +248,7 @@ static const struct rx85x1_config rx8571_config = {
 	.num_nvram = 2
 };

-static int rx8581_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int rx8581_probe(struct i2c_client *client)
 {
 	struct rx8581 *rx8581;
 	const struct rx85x1_config *config = &rx8581_config;
@ -326,7 +325,7 @@ static struct i2c_driver rx8581_driver = {
 		.name	= "rtc-rx8581",
 		.of_match_table = of_match_ptr(rx8581_of_match),
 	},
-	.probe		= rx8581_probe,
+	.probe_new	= rx8581_probe,
 	.id_table	= rx8581_id,
 };

--- a/drivers/rtc/rtc-s35390a.c
+++ b/drivers/rtc/rtc-s35390a.c
@ -420,8 +420,7 @@ static const struct rtc_class_ops s35390a_rtc_ops = {
 	.ioctl          = s35390a_rtc_ioctl,
 };

-static int s35390a_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+static int s35390a_probe(struct i2c_client *client)
 {
 	int err, err_read;
 	unsigned int i;
@ -502,7 +501,7 @@ static struct i2c_driver s35390a_driver = {
 		.name	= "rtc-s35390a",
 		.of_match_table = of_match_ptr(s35390a_of_match),
 	},
-	.probe		= s35390a_probe,
+	.probe_new	= s35390a_probe,
 	.id_table	= s35390a_id,
 };

--- a/drivers/rtc/rtc-sd3078.c
+++ b/drivers/rtc/rtc-sd3078.c
@ -163,8 +163,7 @@ static const struct regmap_config regmap_config = {
 	.max_register = 0x11,
 };

-static int sd3078_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int sd3078_probe(struct i2c_client *client)
 {
 	int ret;
 	struct sd3078 *sd3078;
@ -218,7 +217,7 @@ static struct i2c_driver sd3078_driver = {
 		.name   = "sd3078",
 		.of_match_table = of_match_ptr(rtc_dt_match),
 	},
-	.probe      = sd3078_probe,
+	.probe_new  = sd3078_probe,
 	.id_table   = sd3078_id,
 };

--- a/drivers/rtc/rtc-spear.c
+++ b/drivers/rtc/rtc-spear.c
@ -388,7 +388,7 @@ static int spear_rtc_probe(struct platform_device *pdev)

 	config->rtc->ops = &spear_rtc_ops;
 	config->rtc->range_min = RTC_TIMESTAMP_BEGIN_0000;
-	config->rtc->range_min = RTC_TIMESTAMP_END_9999;
+	config->rtc->range_max = RTC_TIMESTAMP_END_9999;

 	status = devm_rtc_register_device(config->rtc);
 	if (status)
--- a/drivers/rtc/rtc-sun6i.c
+++ b/drivers/rtc/rtc-sun6i.c
@ -875,6 +875,8 @@ static const struct of_device_id sun6i_rtc_dt_ids[] = {
 	{ .compatible = "allwinner,sun50i-h6-rtc" },
 	{ .compatible = "allwinner,sun50i-h616-rtc",
 		.data = (void *)RTC_LINEAR_DAY },
+	{ .compatible = "allwinner,sun50i-r329-rtc",
+		.data = (void *)RTC_LINEAR_DAY },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, sun6i_rtc_dt_ids);
--- a/drivers/rtc/rtc-ti-k3.c
+++ b/drivers/rtc/rtc-ti-k3.c
@ -0,0 +1,680 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Texas Instruments K3 RTC driver
+ *
+ * Copyright (C) 2021-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+
+/* Registers */
+#define REG_K3RTC_S_CNT_LSW		0x08
+#define REG_K3RTC_S_CNT_MSW		0x0c
+#define REG_K3RTC_COMP			0x10
+#define REG_K3RTC_ON_OFF_S_CNT_LSW	0x20
+#define REG_K3RTC_ON_OFF_S_CNT_MSW	0x24
+#define REG_K3RTC_SCRATCH0		0x30
+#define REG_K3RTC_SCRATCH7		0x4c
+#define REG_K3RTC_GENERAL_CTL		0x50
+#define REG_K3RTC_IRQSTATUS_RAW_SYS	0x54
+#define REG_K3RTC_IRQSTATUS_SYS		0x58
+#define REG_K3RTC_IRQENABLE_SET_SYS	0x5c
+#define REG_K3RTC_IRQENABLE_CLR_SYS	0x60
+#define REG_K3RTC_SYNCPEND		0x68
+#define REG_K3RTC_KICK0			0x70
+#define REG_K3RTC_KICK1			0x74
+
+/* Freeze when lsw is read and unfreeze when msw is read */
+#define K3RTC_CNT_FMODE_S_CNT_VALUE	(0x2 << 24)
+
+/* Magic values for lock/unlock */
+#define K3RTC_KICK0_UNLOCK_VALUE	0x83e70b13
+#define K3RTC_KICK1_UNLOCK_VALUE	0x95a4f1e0
+
+/* Multiplier for ppb conversions */
+#define K3RTC_PPB_MULT			(1000000000LL)
+/* Min and max values supported with 'offset' interface (swapped sign) */
+#define K3RTC_MIN_OFFSET		(-277761)
+#define K3RTC_MAX_OFFSET		(277778)
+
+/**
+ * struct ti_k3_rtc_soc_data - Private of compatible data for ti-k3-rtc
+ * @unlock_irq_erratum:	Has erratum for unlock infinite IRQs (erratum i2327)
+ */
+struct ti_k3_rtc_soc_data {
+	const bool unlock_irq_erratum;
+};
+
+static const struct regmap_config ti_k3_rtc_regmap_config = {
+	.name = "peripheral-registers",
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = REG_K3RTC_KICK1,
+};
+
+enum ti_k3_rtc_fields {
+	K3RTC_KICK0,
+	K3RTC_KICK1,
+	K3RTC_S_CNT_LSW,
+	K3RTC_S_CNT_MSW,
+	K3RTC_O32K_OSC_DEP_EN,
+	K3RTC_UNLOCK,
+	K3RTC_CNT_FMODE,
+	K3RTC_PEND,
+	K3RTC_RELOAD_FROM_BBD,
+	K3RTC_COMP,
+
+	K3RTC_ALM_S_CNT_LSW,
+	K3RTC_ALM_S_CNT_MSW,
+	K3RTC_IRQ_STATUS_RAW,
+	K3RTC_IRQ_STATUS,
+	K3RTC_IRQ_ENABLE_SET,
+	K3RTC_IRQ_ENABLE_CLR,
+
+	K3RTC_IRQ_STATUS_ALT,
+	K3RTC_IRQ_ENABLE_CLR_ALT,
+
+	K3_RTC_MAX_FIELDS
+};
+
+static const struct reg_field ti_rtc_reg_fields[] = {
+	[K3RTC_KICK0] = REG_FIELD(REG_K3RTC_KICK0, 0, 31),
+	[K3RTC_KICK1] = REG_FIELD(REG_K3RTC_KICK1, 0, 31),
+	[K3RTC_S_CNT_LSW] = REG_FIELD(REG_K3RTC_S_CNT_LSW, 0, 31),
+	[K3RTC_S_CNT_MSW] = REG_FIELD(REG_K3RTC_S_CNT_MSW, 0, 15),
+	[K3RTC_O32K_OSC_DEP_EN] = REG_FIELD(REG_K3RTC_GENERAL_CTL, 21, 21),
+	[K3RTC_UNLOCK] = REG_FIELD(REG_K3RTC_GENERAL_CTL, 23, 23),
+	[K3RTC_CNT_FMODE] = REG_FIELD(REG_K3RTC_GENERAL_CTL, 24, 25),
+	[K3RTC_PEND] = REG_FIELD(REG_K3RTC_SYNCPEND, 0, 1),
+	[K3RTC_RELOAD_FROM_BBD] = REG_FIELD(REG_K3RTC_SYNCPEND, 31, 31),
+	[K3RTC_COMP] = REG_FIELD(REG_K3RTC_COMP, 0, 31),
+
+	/* We use on to off as alarm trigger */
+	[K3RTC_ALM_S_CNT_LSW] = REG_FIELD(REG_K3RTC_ON_OFF_S_CNT_LSW, 0, 31),
+	[K3RTC_ALM_S_CNT_MSW] = REG_FIELD(REG_K3RTC_ON_OFF_S_CNT_MSW, 0, 15),
+	[K3RTC_IRQ_STATUS_RAW] = REG_FIELD(REG_K3RTC_IRQSTATUS_RAW_SYS, 0, 0),
+	[K3RTC_IRQ_STATUS] = REG_FIELD(REG_K3RTC_IRQSTATUS_SYS, 0, 0),
+	[K3RTC_IRQ_ENABLE_SET] = REG_FIELD(REG_K3RTC_IRQENABLE_SET_SYS, 0, 0),
+	[K3RTC_IRQ_ENABLE_CLR] = REG_FIELD(REG_K3RTC_IRQENABLE_CLR_SYS, 0, 0),
+	/* Off to on is alternate */
+	[K3RTC_IRQ_STATUS_ALT] = REG_FIELD(REG_K3RTC_IRQSTATUS_SYS, 1, 1),
+	[K3RTC_IRQ_ENABLE_CLR_ALT] = REG_FIELD(REG_K3RTC_IRQENABLE_CLR_SYS, 1, 1),
+};
+
+/**
+ * struct ti_k3_rtc - Private data for ti-k3-rtc
+ * @irq:		IRQ
+ * @sync_timeout_us:	data sync timeout period in uSec
+ * @rate_32k:		32k clock rate in Hz
+ * @rtc_dev:		rtc device
+ * @regmap:		rtc mmio regmap
+ * @r_fields:		rtc register fields
+ * @soc:		SoC compatible match data
+ */
+struct ti_k3_rtc {
+	unsigned int irq;
+	u32 sync_timeout_us;
+	unsigned long rate_32k;
+	struct rtc_device *rtc_dev;
+	struct regmap *regmap;
+	struct regmap_field *r_fields[K3_RTC_MAX_FIELDS];
+	const struct ti_k3_rtc_soc_data *soc;
+};
+
+static int k3rtc_field_read(struct ti_k3_rtc *priv, enum ti_k3_rtc_fields f)
+{
+	int ret;
+	int val;
+
+	ret = regmap_field_read(priv->r_fields[f], &val);
+	/*
+	 * We shouldn't be seeing regmap fail on us for mmio reads
+	 * This is possible if clock context fails, but that isn't the case for us
+	 */
+	if (WARN_ON_ONCE(ret))
+		return ret;
+	return val;
+}
+
+static void k3rtc_field_write(struct ti_k3_rtc *priv, enum ti_k3_rtc_fields f, u32 val)
+{
+	regmap_field_write(priv->r_fields[f], val);
+}
+
+/**
+ * k3rtc_fence  - Ensure a register sync took place between the two domains
+ * @priv:      pointer to priv data
+ *
+ * Return: 0 if the sync took place, else returns -ETIMEDOUT
+ */
+static int k3rtc_fence(struct ti_k3_rtc *priv)
+{
+	int ret;
+
+	ret = regmap_field_read_poll_timeout(priv->r_fields[K3RTC_PEND], ret,
+					     !ret, 2, priv->sync_timeout_us);
+
+	return ret;
+}
+
+static inline int k3rtc_check_unlocked(struct ti_k3_rtc *priv)
+{
+	int ret;
+
+	ret = k3rtc_field_read(priv, K3RTC_UNLOCK);
+	if (ret < 0)
+		return ret;
+
+	return (ret) ? 0 : 1;
+}
+
+static int k3rtc_unlock_rtc(struct ti_k3_rtc *priv)
+{
+	int ret;
+
+	ret = k3rtc_check_unlocked(priv);
+	if (!ret)
+		return ret;
+
+	k3rtc_field_write(priv, K3RTC_KICK0, K3RTC_KICK0_UNLOCK_VALUE);
+	k3rtc_field_write(priv, K3RTC_KICK1, K3RTC_KICK1_UNLOCK_VALUE);
+
+	/* Skip fence since we are going to check the unlock bit as fence */
+	ret = regmap_field_read_poll_timeout(priv->r_fields[K3RTC_UNLOCK], ret,
+					     !ret, 2, priv->sync_timeout_us);
+
+	return ret;
+}
+
+static int k3rtc_configure(struct device *dev)
+{
+	int ret;
+	struct ti_k3_rtc *priv = dev_get_drvdata(dev);
+
+	/*
+	 * HWBUG: The compare state machine is broken if the RTC module
+	 * is NOT unlocked in under one second of boot - which is pretty long
+	 * time from the perspective of Linux driver (module load, u-boot
+	 * shell all can take much longer than this.
+	 *
+	 * In such occurrence, it is assumed that the RTC module is unusable
+	 */
+	if (priv->soc->unlock_irq_erratum) {
+		ret = k3rtc_check_unlocked(priv);
+		/* If there is an error OR if we are locked, return error */
+		if (ret) {
+			dev_err(dev,
+				HW_ERR "Erratum i2327 unlock QUIRK! Cannot operate!!\n");
+			return -EFAULT;
+		}
+	} else {
+		/* May need to explicitly unlock first time */
+		ret = k3rtc_unlock_rtc(priv);
+		if (ret) {
+			dev_err(dev, "Failed to unlock(%d)!\n", ret);
+			return ret;
+		}
+	}
+
+	/* Enable Shadow register sync on 32k clock boundary */
+	k3rtc_field_write(priv, K3RTC_O32K_OSC_DEP_EN, 0x1);
+
+	/*
+	 * Wait at least clock sync time before proceeding further programming.
+	 * This ensures that the 32k based sync is active.
+	 */
+	usleep_range(priv->sync_timeout_us, priv->sync_timeout_us + 5);
+
+	/* We need to ensure fence here to make sure sync here */
+	ret = k3rtc_fence(priv);
+	if (ret) {
+		dev_err(dev,
+			"Failed fence osc_dep enable(%d) - is 32k clk working?!\n", ret);
+		return ret;
+	}
+
+	/*
+	 * FMODE setting: Reading lower seconds will freeze value on higher
+	 * seconds. This also implies that we must *ALWAYS* read lower seconds
+	 * prior to reading higher seconds
+	 */
+	k3rtc_field_write(priv, K3RTC_CNT_FMODE, K3RTC_CNT_FMODE_S_CNT_VALUE);
+
+	/* Clear any spurious IRQ sources if any */
+	k3rtc_field_write(priv, K3RTC_IRQ_STATUS_ALT, 0x1);
+	k3rtc_field_write(priv, K3RTC_IRQ_STATUS, 0x1);
+	/* Disable all IRQs */
+	k3rtc_field_write(priv, K3RTC_IRQ_ENABLE_CLR_ALT, 0x1);
+	k3rtc_field_write(priv, K3RTC_IRQ_ENABLE_CLR, 0x1);
+
+	/* And.. Let us Sync the writes in */
+	return k3rtc_fence(priv);
+}
+
+static int ti_k3_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+	struct ti_k3_rtc *priv = dev_get_drvdata(dev);
+	u32 seconds_lo, seconds_hi;
+
+	seconds_lo = k3rtc_field_read(priv, K3RTC_S_CNT_LSW);
+	seconds_hi = k3rtc_field_read(priv, K3RTC_S_CNT_MSW);
+
+	rtc_time64_to_tm((((time64_t)seconds_hi) << 32) | (time64_t)seconds_lo, tm);
+
+	return 0;
+}
+
+static int ti_k3_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+	struct ti_k3_rtc *priv = dev_get_drvdata(dev);
+	time64_t seconds;
+
+	seconds = rtc_tm_to_time64(tm);
+
+	/*
+	 * Read operation on LSW will freeze the RTC, so to update
+	 * the time, we cannot use field operations. Just write since the
+	 * reserved bits are ignored.
+	 */
+	regmap_write(priv->regmap, REG_K3RTC_S_CNT_LSW, seconds);
+	regmap_write(priv->regmap, REG_K3RTC_S_CNT_MSW, seconds >> 32);
+
+	return k3rtc_fence(priv);
+}
+
+static int ti_k3_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+	struct ti_k3_rtc *priv = dev_get_drvdata(dev);
+	u32 reg;
+	u32 offset = enabled ? K3RTC_IRQ_ENABLE_SET : K3RTC_IRQ_ENABLE_CLR;
+
+	reg = k3rtc_field_read(priv, K3RTC_IRQ_ENABLE_SET);
+	if ((enabled && reg) || (!enabled && !reg))
+		return 0;
+
+	k3rtc_field_write(priv, offset, 0x1);
+
+	/*
+	 * Ensure the write sync is through - NOTE: it should be OK to have
+	 * ISR to fire as we are checking sync (which should be done in a 32k
+	 * cycle or so).
+	 */
+	return k3rtc_fence(priv);
+}
+
+static int ti_k3_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct ti_k3_rtc *priv = dev_get_drvdata(dev);
+	u32 seconds_lo, seconds_hi;
+
+	seconds_lo = k3rtc_field_read(priv, K3RTC_ALM_S_CNT_LSW);
+	seconds_hi = k3rtc_field_read(priv, K3RTC_ALM_S_CNT_MSW);
+
+	rtc_time64_to_tm((((time64_t)seconds_hi) << 32) | (time64_t)seconds_lo, &alarm->time);
+
+	alarm->enabled = k3rtc_field_read(priv, K3RTC_IRQ_ENABLE_SET);
+
+	return 0;
+}
+
+static int ti_k3_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
+{
+	struct ti_k3_rtc *priv = dev_get_drvdata(dev);
+	time64_t seconds;
+	int ret;
+
+	seconds = rtc_tm_to_time64(&alarm->time);
+
+	k3rtc_field_write(priv, K3RTC_ALM_S_CNT_LSW, seconds);
+	k3rtc_field_write(priv, K3RTC_ALM_S_CNT_MSW, (seconds >> 32));
+
+	/* Make sure the alarm time is synced in */
+	ret = k3rtc_fence(priv);
+	if (ret) {
+		dev_err(dev, "Failed to fence(%d)! Potential config issue?\n", ret);
+		return ret;
+	}
+
+	/* Alarm IRQ enable will do a sync */
+	return ti_k3_rtc_alarm_irq_enable(dev, alarm->enabled);
+}
+
+static int ti_k3_rtc_read_offset(struct device *dev, long *offset)
+{
+	struct ti_k3_rtc *priv = dev_get_drvdata(dev);
+	u32 ticks_per_hr = priv->rate_32k * 3600;
+	int comp;
+	s64 tmp;
+
+	comp = k3rtc_field_read(priv, K3RTC_COMP);
+
+	/* Convert from RTC calibration register format to ppb format */
+	tmp = comp * (s64)K3RTC_PPB_MULT;
+	if (tmp < 0)
+		tmp -= ticks_per_hr / 2LL;
+	else
+		tmp += ticks_per_hr / 2LL;
+	tmp = div_s64(tmp, ticks_per_hr);
+
+	/* Offset value operates in negative way, so swap sign */
+	*offset = (long)-tmp;
+
+	return 0;
+}
+
+static int ti_k3_rtc_set_offset(struct device *dev, long offset)
+{
+	struct ti_k3_rtc *priv = dev_get_drvdata(dev);
+	u32 ticks_per_hr = priv->rate_32k * 3600;
+	int comp;
+	s64 tmp;
+
+	/* Make sure offset value is within supported range */
+	if (offset < K3RTC_MIN_OFFSET || offset > K3RTC_MAX_OFFSET)
+		return -ERANGE;
+
+	/* Convert from ppb format to RTC calibration register format */
+	tmp = offset * (s64)ticks_per_hr;
+	if (tmp < 0)
+		tmp -= K3RTC_PPB_MULT / 2LL;
+	else
+		tmp += K3RTC_PPB_MULT / 2LL;
+	tmp = div_s64(tmp, K3RTC_PPB_MULT);
+
+	/* Offset value operates in negative way, so swap sign */
+	comp = (int)-tmp;
+
+	k3rtc_field_write(priv, K3RTC_COMP, comp);
+
+	return k3rtc_fence(priv);
+}
+
+static irqreturn_t ti_k3_rtc_interrupt(s32 irq, void *dev_id)
+{
+	struct device *dev = dev_id;
+	struct ti_k3_rtc *priv = dev_get_drvdata(dev);
+	u32 reg;
+	int ret;
+
+	/*
+	 * IRQ assertion can be very fast, however, the IRQ Status clear
+	 * de-assert depends on 32k clock edge in the 32k domain
+	 * If we clear the status prior to the first 32k clock edge,
+	 * the status bit is cleared, but the IRQ stays re-asserted.
+	 *
+	 * To prevent this condition, we need to wait for clock sync time.
+	 * We can either do that by polling the 32k observability signal for
+	 * a toggle OR we could just sleep and let the processor do other
+	 * stuff.
+	 */
+	usleep_range(priv->sync_timeout_us, priv->sync_timeout_us + 2);
+
+	/* Lets make sure that this is a valid interrupt */
+	reg = k3rtc_field_read(priv, K3RTC_IRQ_STATUS);
+
+	if (!reg) {
+		u32 raw = k3rtc_field_read(priv, K3RTC_IRQ_STATUS_RAW);
+
+		dev_err(dev,
+			HW_ERR
+			"Erratum i2327/IRQ trig: status: 0x%08x / 0x%08x\n", reg, raw);
+		return IRQ_NONE;
+	}
+
+	/*
+	 * Write 1 to clear status reg
+	 * We cannot use a field operation here due to a potential race between
+	 * 32k domain and vbus domain.
+	 */
+	regmap_write(priv->regmap, REG_K3RTC_IRQSTATUS_SYS, 0x1);
+
+	/* Sync the write in */
+	ret = k3rtc_fence(priv);
+	if (ret) {
+		dev_err(dev, "Failed to fence irq status clr(%d)!\n", ret);
+		return IRQ_NONE;
+	}
+
+	/*
+	 * Force the 32k status to be reloaded back in to ensure status is
+	 * reflected back correctly.
+	 */
+	k3rtc_field_write(priv, K3RTC_RELOAD_FROM_BBD, 0x1);
+
+	/* Ensure the write sync is through */
+	ret = k3rtc_fence(priv);
+	if (ret) {
+		dev_err(dev, "Failed to fence reload from bbd(%d)!\n", ret);
+		return IRQ_NONE;
+	}
+
+	/* Now we ensure that the status bit is cleared */
+	ret = regmap_field_read_poll_timeout(priv->r_fields[K3RTC_IRQ_STATUS],
+					     ret, !ret, 2, priv->sync_timeout_us);
+	if (ret) {
+		dev_err(dev, "Time out waiting for status clear\n");
+		return IRQ_NONE;
+	}
+
+	/* Notify RTC core on event */
+	rtc_update_irq(priv->rtc_dev, 1, RTC_IRQF | RTC_AF);
+
+	return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops ti_k3_rtc_ops = {
+	.read_time = ti_k3_rtc_read_time,
+	.set_time = ti_k3_rtc_set_time,
+	.read_alarm = ti_k3_rtc_read_alarm,
+	.set_alarm = ti_k3_rtc_set_alarm,
+	.read_offset = ti_k3_rtc_read_offset,
+	.set_offset = ti_k3_rtc_set_offset,
+	.alarm_irq_enable = ti_k3_rtc_alarm_irq_enable,
+};
+
+static int ti_k3_rtc_scratch_read(void *priv_data, unsigned int offset,
+				  void *val, size_t bytes)
+{
+	struct ti_k3_rtc *priv = (struct ti_k3_rtc *)priv_data;
+
+	return regmap_bulk_read(priv->regmap, REG_K3RTC_SCRATCH0 + offset, val, bytes / 4);
+}
+
+static int ti_k3_rtc_scratch_write(void *priv_data, unsigned int offset,
+				   void *val, size_t bytes)
+{
+	struct ti_k3_rtc *priv = (struct ti_k3_rtc *)priv_data;
+	int ret;
+
+	ret = regmap_bulk_write(priv->regmap, REG_K3RTC_SCRATCH0 + offset, val, bytes / 4);
+	if (ret)
+		return ret;
+
+	return k3rtc_fence(priv);
+}
+
+static struct nvmem_config ti_k3_rtc_nvmem_config = {
+	.name = "ti_k3_rtc_scratch",
+	.word_size = 4,
+	.stride = 4,
+	.size = REG_K3RTC_SCRATCH7 - REG_K3RTC_SCRATCH0 + 4,
+	.reg_read = ti_k3_rtc_scratch_read,
+	.reg_write = ti_k3_rtc_scratch_write,
+};
+
+static int k3rtc_get_32kclk(struct device *dev, struct ti_k3_rtc *priv)
+{
+	int ret;
+	struct clk *clk;
+
+	clk = devm_clk_get(dev, "osc32k");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	ret = clk_prepare_enable(clk);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, (void (*)(void *))clk_disable_unprepare, clk);
+	if (ret)
+		return ret;
+
+	priv->rate_32k = clk_get_rate(clk);
+
+	/* Make sure we are exact 32k clock. Else, try to compensate delay */
+	if (priv->rate_32k != 32768)
+		dev_warn(dev, "Clock rate %ld is not 32768! Could misbehave!\n",
+			 priv->rate_32k);
+
+	/*
+	 * Sync timeout should be two 32k clk sync cycles = ~61uS. We double
+	 * it to comprehend intermediate bus segment and cpu frequency
+	 * deltas
+	 */
+	priv->sync_timeout_us = (u32)(DIV_ROUND_UP_ULL(1000000, priv->rate_32k) * 4);
+
+	return ret;
+}
+
+static int k3rtc_get_vbusclk(struct device *dev, struct ti_k3_rtc *priv)
+{
+	int ret;
+	struct clk *clk;
+
+	/* Note: VBUS isn't a context clock, it is needed for hardware operation */
+	clk = devm_clk_get(dev, "vbus");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	ret = clk_prepare_enable(clk);
+	if (ret)
+		return ret;
+
+	return devm_add_action_or_reset(dev, (void (*)(void *))clk_disable_unprepare, clk);
+}
+
+static int ti_k3_rtc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ti_k3_rtc *priv;
+	void __iomem *rtc_base;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(struct ti_k3_rtc), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	rtc_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(rtc_base))
+		return PTR_ERR(rtc_base);
+
+	priv->regmap = devm_regmap_init_mmio(dev, rtc_base, &ti_k3_rtc_regmap_config);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	ret = devm_regmap_field_bulk_alloc(dev, priv->regmap, priv->r_fields,
+					   ti_rtc_reg_fields, K3_RTC_MAX_FIELDS);
+	if (ret)
+		return ret;
+
+	ret = k3rtc_get_32kclk(dev, priv);
+	if (ret)
+		return ret;
+	ret = k3rtc_get_vbusclk(dev, priv);
+	if (ret)
+		return ret;
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		return ret;
+	priv->irq = (unsigned int)ret;
+
+	priv->rtc_dev = devm_rtc_allocate_device(dev);
+	if (IS_ERR(priv->rtc_dev))
+		return PTR_ERR(priv->rtc_dev);
+
+	priv->soc = of_device_get_match_data(dev);
+
+	priv->rtc_dev->ops = &ti_k3_rtc_ops;
+	priv->rtc_dev->range_max = (1ULL << 48) - 1;	/* 48Bit seconds */
+	ti_k3_rtc_nvmem_config.priv = priv;
+
+	ret = devm_request_threaded_irq(dev, priv->irq, NULL,
+					ti_k3_rtc_interrupt,
+					IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+					dev_name(dev), dev);
+	if (ret) {
+		dev_err(dev, "Could not request IRQ: %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, priv);
+
+	ret = k3rtc_configure(dev);
+	if (ret)
+		return ret;
+
+	if (device_property_present(dev, "wakeup-source"))
+		device_init_wakeup(dev, true);
+	else
+		device_set_wakeup_capable(dev, true);
+
+	ret = devm_rtc_register_device(priv->rtc_dev);
+	if (ret)
+		return ret;
+
+	return devm_rtc_nvmem_register(priv->rtc_dev, &ti_k3_rtc_nvmem_config);
+}
+
+static const struct ti_k3_rtc_soc_data ti_k3_am62_data = {
+	.unlock_irq_erratum = true,
+};
+
+static const struct of_device_id ti_k3_rtc_of_match_table[] = {
+	{.compatible = "ti,am62-rtc", .data = &ti_k3_am62_data},
+	{}
+};
+MODULE_DEVICE_TABLE(of, ti_k3_rtc_of_match_table);
+
+static int __maybe_unused ti_k3_rtc_suspend(struct device *dev)
+{
+	struct ti_k3_rtc *priv = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(priv->irq);
+	return 0;
+}
+
+static int __maybe_unused ti_k3_rtc_resume(struct device *dev)
+{
+	struct ti_k3_rtc *priv = dev_get_drvdata(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(priv->irq);
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ti_k3_rtc_pm_ops, ti_k3_rtc_suspend, ti_k3_rtc_resume);
+
+static struct platform_driver ti_k3_rtc_driver = {
+	.probe = ti_k3_rtc_probe,
+	.driver = {
+		   .name = "rtc-ti-k3",
+		   .of_match_table = ti_k3_rtc_of_match_table,
+		   .pm = &ti_k3_rtc_pm_ops,
+	},
+};
+module_platform_driver(ti_k3_rtc_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("TI K3 RTC driver");
+MODULE_AUTHOR("Nishanth Menon");
--- a/drivers/rtc/rtc-vr41xx.c
+++ b/drivers/rtc/rtc-vr41xx.c
@ -1,363 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- *  Driver for NEC VR4100 series Real Time Clock unit.
- *
- *  Copyright (C) 2003-2008  Yoichi Yuasa <yuasa@linux-mips.org>
- */
-#include <linux/compat.h>
-#include <linux/err.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/rtc.h>
-#include <linux/spinlock.h>
-#include <linux/types.h>
-#include <linux/uaccess.h>
-#include <linux/log2.h>
-
-#include <asm/div64.h>
-
-MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
-MODULE_DESCRIPTION("NEC VR4100 series RTC driver");
-MODULE_LICENSE("GPL v2");
-
-/* RTC 1 registers */
-#define ETIMELREG		0x00
-#define ETIMEMREG		0x02
-#define ETIMEHREG		0x04
-/* RFU */
-#define ECMPLREG		0x08
-#define ECMPMREG		0x0a
-#define ECMPHREG		0x0c
-/* RFU */
-#define RTCL1LREG		0x10
-#define RTCL1HREG		0x12
-#define RTCL1CNTLREG		0x14
-#define RTCL1CNTHREG		0x16
-#define RTCL2LREG		0x18
-#define RTCL2HREG		0x1a
-#define RTCL2CNTLREG		0x1c
-#define RTCL2CNTHREG		0x1e
-
-/* RTC 2 registers */
-#define TCLKLREG		0x00
-#define TCLKHREG		0x02
-#define TCLKCNTLREG		0x04
-#define TCLKCNTHREG		0x06
-/* RFU */
-#define RTCINTREG		0x1e
- #define TCLOCK_INT		0x08
- #define RTCLONG2_INT		0x04
- #define RTCLONG1_INT		0x02
- #define ELAPSEDTIME_INT	0x01
-
-#define RTC_FREQUENCY		32768
-#define MAX_PERIODIC_RATE	6553
-
-static void __iomem *rtc1_base;
-static void __iomem *rtc2_base;
-
-#define rtc1_read(offset)		readw(rtc1_base + (offset))
-#define rtc1_write(offset, value)	writew((value), rtc1_base + (offset))
-
-#define rtc2_read(offset)		readw(rtc2_base + (offset))
-#define rtc2_write(offset, value)	writew((value), rtc2_base + (offset))
-
-/* 32-bit compat for ioctls that nobody else uses */
-#define RTC_EPOCH_READ32	_IOR('p', 0x0d, __u32)
-
-static unsigned long epoch = 1970;	/* Jan 1 1970 00:00:00 */
-
-static DEFINE_SPINLOCK(rtc_lock);
-static char rtc_name[] = "RTC";
-static unsigned long periodic_count;
-static unsigned int alarm_enabled;
-static int aie_irq;
-static int pie_irq;
-
-static inline time64_t read_elapsed_second(void)
-{
-
-	unsigned long first_low, first_mid, first_high;
-
-	unsigned long second_low, second_mid, second_high;
-
-	do {
-		first_low = rtc1_read(ETIMELREG);
-		first_mid = rtc1_read(ETIMEMREG);
-		first_high = rtc1_read(ETIMEHREG);
-		second_low = rtc1_read(ETIMELREG);
-		second_mid = rtc1_read(ETIMEMREG);
-		second_high = rtc1_read(ETIMEHREG);
-	} while (first_low != second_low || first_mid != second_mid ||
-		 first_high != second_high);
-
-	return ((u64)first_high << 17) | (first_mid << 1) | (first_low >> 15);
-}
-
-static inline void write_elapsed_second(time64_t sec)
-{
-	spin_lock_irq(&rtc_lock);
-
-	rtc1_write(ETIMELREG, (uint16_t)(sec << 15));
-	rtc1_write(ETIMEMREG, (uint16_t)(sec >> 1));
-	rtc1_write(ETIMEHREG, (uint16_t)(sec >> 17));
-
-	spin_unlock_irq(&rtc_lock);
-}
-
-static int vr41xx_rtc_read_time(struct device *dev, struct rtc_time *time)
-{
-	time64_t epoch_sec, elapsed_sec;
-
-	epoch_sec = mktime64(epoch, 1, 1, 0, 0, 0);
-	elapsed_sec = read_elapsed_second();
-
-	rtc_time64_to_tm(epoch_sec + elapsed_sec, time);
-
-	return 0;
-}
-
-static int vr41xx_rtc_set_time(struct device *dev, struct rtc_time *time)
-{
-	time64_t epoch_sec, current_sec;
-
-	epoch_sec = mktime64(epoch, 1, 1, 0, 0, 0);
-	current_sec = rtc_tm_to_time64(time);
-
-	write_elapsed_second(current_sec - epoch_sec);
-
-	return 0;
-}
-
-static int vr41xx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
-{
-	unsigned long low, mid, high;
-	struct rtc_time *time = &wkalrm->time;
-
-	spin_lock_irq(&rtc_lock);
-
-	low = rtc1_read(ECMPLREG);
-	mid = rtc1_read(ECMPMREG);
-	high = rtc1_read(ECMPHREG);
-	wkalrm->enabled = alarm_enabled;
-
-	spin_unlock_irq(&rtc_lock);
-
-	rtc_time64_to_tm((high << 17) | (mid << 1) | (low >> 15), time);
-
-	return 0;
-}
-
-static int vr41xx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *wkalrm)
-{
-	time64_t alarm_sec;
-
-	alarm_sec = rtc_tm_to_time64(&wkalrm->time);
-
-	spin_lock_irq(&rtc_lock);
-
-	if (alarm_enabled)
-		disable_irq(aie_irq);
-
-	rtc1_write(ECMPLREG, (uint16_t)(alarm_sec << 15));
-	rtc1_write(ECMPMREG, (uint16_t)(alarm_sec >> 1));
-	rtc1_write(ECMPHREG, (uint16_t)(alarm_sec >> 17));
-
-	if (wkalrm->enabled)
-		enable_irq(aie_irq);
-
-	alarm_enabled = wkalrm->enabled;
-
-	spin_unlock_irq(&rtc_lock);
-
-	return 0;
-}
-
-static int vr41xx_rtc_ioctl(struct device *dev, unsigned int cmd, unsigned long arg)
-{
-	switch (cmd) {
-	case RTC_EPOCH_READ:
-		return put_user(epoch, (unsigned long __user *)arg);
-#ifdef CONFIG_64BIT
-	case RTC_EPOCH_READ32:
-		return put_user(epoch, (unsigned int __user *)arg);
-#endif
-	case RTC_EPOCH_SET:
-		/* Doesn't support before 1900 */
-		if (arg < 1900)
-			return -EINVAL;
-		epoch = arg;
-		break;
-	default:
-		return -ENOIOCTLCMD;
-	}
-
-	return 0;
-}
-
-static int vr41xx_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
-{
-	spin_lock_irq(&rtc_lock);
-	if (enabled) {
-		if (!alarm_enabled) {
-			enable_irq(aie_irq);
-			alarm_enabled = 1;
-		}
-	} else {
-		if (alarm_enabled) {
-			disable_irq(aie_irq);
-			alarm_enabled = 0;
-		}
-	}
-	spin_unlock_irq(&rtc_lock);
-	return 0;
-}
-
-static irqreturn_t elapsedtime_interrupt(int irq, void *dev_id)
-{
-	struct platform_device *pdev = (struct platform_device *)dev_id;
-	struct rtc_device *rtc = platform_get_drvdata(pdev);
-
-	rtc2_write(RTCINTREG, ELAPSEDTIME_INT);
-
-	rtc_update_irq(rtc, 1, RTC_AF);
-
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t rtclong1_interrupt(int irq, void *dev_id)
-{
-	struct platform_device *pdev = (struct platform_device *)dev_id;
-	struct rtc_device *rtc = platform_get_drvdata(pdev);
-	unsigned long count = periodic_count;
-
-	rtc2_write(RTCINTREG, RTCLONG1_INT);
-
-	rtc1_write(RTCL1LREG, count);
-	rtc1_write(RTCL1HREG, count >> 16);
-
-	rtc_update_irq(rtc, 1, RTC_PF);
-
-	return IRQ_HANDLED;
-}
-
-static const struct rtc_class_ops vr41xx_rtc_ops = {
-	.ioctl			= vr41xx_rtc_ioctl,
-	.read_time		= vr41xx_rtc_read_time,
-	.set_time		= vr41xx_rtc_set_time,
-	.read_alarm		= vr41xx_rtc_read_alarm,
-	.set_alarm		= vr41xx_rtc_set_alarm,
-	.alarm_irq_enable	= vr41xx_rtc_alarm_irq_enable,
-};
-
-static int rtc_probe(struct platform_device *pdev)
-{
-	struct resource *res;
-	struct rtc_device *rtc;
-	int retval;
-
-	if (pdev->num_resources != 4)
-		return -EBUSY;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -EBUSY;
-
-	rtc1_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
-	if (!rtc1_base)
-		return -EBUSY;
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!res) {
-		retval = -EBUSY;
-		goto err_rtc1_iounmap;
-	}
-
-	rtc2_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
-	if (!rtc2_base) {
-		retval = -EBUSY;
-		goto err_rtc1_iounmap;
-	}
-
-	rtc = devm_rtc_allocate_device(&pdev->dev);
-	if (IS_ERR(rtc)) {
-		retval = PTR_ERR(rtc);
-		goto err_iounmap_all;
-	}
-
-	rtc->ops = &vr41xx_rtc_ops;
-
-	/* 48-bit counter at 32.768 kHz */
-	rtc->range_max = (1ULL << 33) - 1;
-	rtc->max_user_freq = MAX_PERIODIC_RATE;
-
-	spin_lock_irq(&rtc_lock);
-
-	rtc1_write(ECMPLREG, 0);
-	rtc1_write(ECMPMREG, 0);
-	rtc1_write(ECMPHREG, 0);
-	rtc1_write(RTCL1LREG, 0);
-	rtc1_write(RTCL1HREG, 0);
-
-	spin_unlock_irq(&rtc_lock);
-
-	aie_irq = platform_get_irq(pdev, 0);
-	if (aie_irq <= 0) {
-		retval = -EBUSY;
-		goto err_iounmap_all;
-	}
-
-	retval = devm_request_irq(&pdev->dev, aie_irq, elapsedtime_interrupt, 0,
-				"elapsed_time", pdev);
-	if (retval < 0)
-		goto err_iounmap_all;
-
-	pie_irq = platform_get_irq(pdev, 1);
-	if (pie_irq <= 0) {
-		retval = -EBUSY;
-		goto err_iounmap_all;
-	}
-
-	retval = devm_request_irq(&pdev->dev, pie_irq, rtclong1_interrupt, 0,
-				"rtclong1", pdev);
-	if (retval < 0)
-		goto err_iounmap_all;
-
-	platform_set_drvdata(pdev, rtc);
-
-	disable_irq(aie_irq);
-	disable_irq(pie_irq);
-
-	dev_info(&pdev->dev, "Real Time Clock of NEC VR4100 series\n");
-
-	retval = devm_rtc_register_device(rtc);
-	if (retval)
-		goto err_iounmap_all;
-
-	return 0;
-
-err_iounmap_all:
-	rtc2_base = NULL;
-
-err_rtc1_iounmap:
-	rtc1_base = NULL;
-
-	return retval;
-}
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:RTC");
-
-static struct platform_driver rtc_platform_driver = {
-	.probe		= rtc_probe,
-	.driver		= {
-		.name	= rtc_name,
-	},
-};
-
-module_platform_driver(rtc_platform_driver);
--- a/drivers/rtc/rtc-x1205.c
+++ b/drivers/rtc/rtc-x1205.c
@ -614,8 +614,7 @@ static void x1205_sysfs_unregister(struct device *dev)
 }


-static int x1205_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int x1205_probe(struct i2c_client *client)
 {
 	int err = 0;
 	unsigned char sr;
@ -681,7 +680,7 @@ static struct i2c_driver x1205_driver = {
 		.name	= "rtc-x1205",
 		.of_match_table = x1205_dt_ids,
 	},
-	.probe		= x1205_probe,
+	.probe_new	= x1205_probe,
 	.remove		= x1205_remove,
 	.id_table	= x1205_id,
 };
--- a/drivers/rtc/rtc-zynqmp.c
+++ b/drivers/rtc/rtc-zynqmp.c
@ -6,6 +6,7 @@
 *
 */

+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/io.h>
@ -36,17 +37,23 @@
 #define RTC_OSC_EN		BIT(24)
 #define RTC_BATT_EN		BIT(31)

-#define RTC_CALIB_DEF		0x198233
+#define RTC_CALIB_DEF		0x7FFF
 #define RTC_CALIB_MASK		0x1FFFFF
 #define RTC_ALRM_MASK          BIT(1)
 #define RTC_MSEC               1000
+#define RTC_FR_MASK		0xF0000
+#define RTC_FR_MAX_TICKS	16
+#define RTC_PPB			1000000000LL
+#define RTC_MIN_OFFSET		-32768000
+#define RTC_MAX_OFFSET		32767000

 struct xlnx_rtc_dev {
 	struct rtc_device	*rtc;
 	void __iomem		*reg_base;
 	int			alarm_irq;
 	int			sec_irq;
-	unsigned int		calibval;
+	struct clk		*rtc_clk;
+	unsigned int		freq;
 };

 static int xlnx_rtc_set_time(struct device *dev, struct rtc_time *tm)
@ -61,13 +68,6 @@ static int xlnx_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	 */
 	new_time = rtc_tm_to_time64(tm) + 1;

-	/*
-	 * Writing into calibration register will clear the Tick Counter and
-	 * force the next second to be signaled exactly in 1 second period
-	 */
-	xrtcdev->calibval &= RTC_CALIB_MASK;
-	writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
-
 	writel(new_time, xrtcdev->reg_base + RTC_SET_TM_WR);

 	/*
@ -173,15 +173,76 @@ static void xlnx_init_rtc(struct xlnx_rtc_dev *xrtcdev)
 	rtc_ctrl = readl(xrtcdev->reg_base + RTC_CTRL);
 	rtc_ctrl |= RTC_BATT_EN;
 	writel(rtc_ctrl, xrtcdev->reg_base + RTC_CTRL);
+}

-	/*
-	 * Based on crystal freq of 33.330 KHz
-	 * set the seconds counter and enable, set fractions counter
-	 * to default value suggested as per design spec
-	 * to correct RTC delay in frequency over period of time.
+static int xlnx_rtc_read_offset(struct device *dev, long *offset)
+{
+	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
+	unsigned long long rtc_ppb = RTC_PPB;
+	unsigned int tick_mult = do_div(rtc_ppb, xrtcdev->freq);
+	unsigned int calibval;
+	long offset_val;
+
+	calibval = readl(xrtcdev->reg_base + RTC_CALIB_RD);
+	/* Offset with seconds ticks */
+	offset_val = calibval & RTC_TICK_MASK;
+	offset_val = offset_val - RTC_CALIB_DEF;
+	offset_val = offset_val * tick_mult;
+
+	/* Offset with fractional ticks */
+	if (calibval & RTC_FR_EN)
+		offset_val += ((calibval & RTC_FR_MASK) >> RTC_FR_DATSHIFT)
+			* (tick_mult / RTC_FR_MAX_TICKS);
+	*offset = offset_val;
+
+	return 0;
+}
+
+static int xlnx_rtc_set_offset(struct device *dev, long offset)
+{
+	struct xlnx_rtc_dev *xrtcdev = dev_get_drvdata(dev);
+	unsigned long long rtc_ppb = RTC_PPB;
+	unsigned int tick_mult = do_div(rtc_ppb, xrtcdev->freq);
+	unsigned char fract_tick = 0;
+	unsigned int calibval;
+	short int  max_tick;
+	int fract_offset;
+
+	if (offset < RTC_MIN_OFFSET || offset > RTC_MAX_OFFSET)
+		return -ERANGE;
+
+	/* Number ticks for given offset */
+	max_tick = div_s64_rem(offset, tick_mult, &fract_offset);
+
+	/* Number fractional ticks for given offset */
+	if (fract_offset) {
+		if (fract_offset < 0) {
+			fract_offset = fract_offset + tick_mult;
+			max_tick--;
+		}
+		if (fract_offset > (tick_mult / RTC_FR_MAX_TICKS)) {
+			for (fract_tick = 1; fract_tick < 16; fract_tick++) {
+				if (fract_offset <=
+				    (fract_tick *
+				     (tick_mult / RTC_FR_MAX_TICKS)))
+					break;
+			}
+		}
+	}
+
+	/* Zynqmp RTC uses second and fractional tick
+	 * counters for compensation
 	 */
-	xrtcdev->calibval &= RTC_CALIB_MASK;
-	writel(xrtcdev->calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
+	calibval = max_tick + RTC_CALIB_DEF;
+
+	if (fract_tick)
+		calibval |= RTC_FR_EN;
+
+	calibval |= (fract_tick << RTC_FR_DATSHIFT);
+
+	writel(calibval, (xrtcdev->reg_base + RTC_CALIB_WR));
+
+	return 0;
 }

 static const struct rtc_class_ops xlnx_rtc_ops = {
@ -190,6 +251,8 @@ static const struct rtc_class_ops xlnx_rtc_ops = {
 	.read_alarm	  = xlnx_rtc_read_alarm,
 	.set_alarm	  = xlnx_rtc_set_alarm,
 	.alarm_irq_enable = xlnx_rtc_alarm_irq_enable,
+	.read_offset	  = xlnx_rtc_read_offset,
+	.set_offset	  = xlnx_rtc_set_offset,
 };

 static irqreturn_t xlnx_rtc_interrupt(int irq, void *id)
@ -255,10 +318,22 @@ static int xlnx_rtc_probe(struct platform_device *pdev)
 		return ret;
 	}

-	ret = of_property_read_u32(pdev->dev.of_node, "calibration",
-				   &xrtcdev->calibval);
-	if (ret)
-		xrtcdev->calibval = RTC_CALIB_DEF;
+	/* Getting the rtc_clk info */
+	xrtcdev->rtc_clk = devm_clk_get_optional(&pdev->dev, "rtc_clk");
+	if (IS_ERR(xrtcdev->rtc_clk)) {
+		if (PTR_ERR(xrtcdev->rtc_clk) != -EPROBE_DEFER)
+			dev_warn(&pdev->dev, "Device clock not found.\n");
+	}
+	xrtcdev->freq = clk_get_rate(xrtcdev->rtc_clk);
+	if (!xrtcdev->freq) {
+		ret = of_property_read_u32(pdev->dev.of_node, "calibration",
+					   &xrtcdev->freq);
+		if (ret)
+			xrtcdev->freq = RTC_CALIB_DEF;
+	}
+	ret = readl(xrtcdev->reg_base + RTC_CALIB_RD);
+	if (!ret)
+		writel(xrtcdev->freq, (xrtcdev->reg_base + RTC_CALIB_WR));

 	xlnx_init_rtc(xrtcdev);