mirror of
https://github.com/torvalds/linux.git
synced 2024-12-03 17:41:22 +00:00
ARM: dts: Add Odroid XU3 Lite support
The Odroid XU3 Lite is almost the same as XU3, except: 1. Lower CPU frequencies (1.8 GHz for A15 and 1.3 GHz for A7, instead of 2.0 GHz and 1.4 GHz). 2. No DisplayPort. 3. No TI INA231 energy measurement sensors. This patch moves common nodes (which is almost everything) to a common DTSI file and adds a new XU3 Lite DTS. Currently in comparison to XU3, only the INA231 sensors are disabled to remove the warning: ina2xx 0-0040: error configuring the device: -6 Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
This commit is contained in:
Krzysztof Kozlowski
Kukjin Kim
parent
6bebe8daa6
commit
3a7c01d75f
@ -113,6 +113,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
|
||||
exynos5420-peach-pit.dtb \
|
||||
exynos5420-smdk5420.dtb \
|
||||
exynos5422-odroidxu3.dtb \
|
||||
exynos5422-odroidxu3-lite.dtb \
|
||||
exynos5440-sd5v1.dtb \
|
||||
exynos5440-ssdk5440.dtb \
|
||||
exynos5800-peach-pi.dtb
|
||||
|
||||
479
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
Normal file
479
arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
Normal file
@ -0,0 +1,479 @@
|
||||
/*
|
||||
* Hardkernel Odroid XU3 board device tree source
|
||||
*
|
||||
* Copyright (c) 2014 Collabora Ltd.
|
||||
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
|
||||
* http://www.samsung.com
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/clock/samsung,s2mps11.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/sound/samsung-i2s.h>
|
||||
#include "exynos5800.dtsi"
|
||||
|
||||
/ {
|
||||
memory {
|
||||
reg = <0x40000000 0x7EA00000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
linux,stdout-path = &serial_2;
|
||||
};
|
||||
|
||||
firmware@02073000 {
|
||||
compatible = "samsung,secure-firmware";
|
||||
reg = <0x02073000 0x1000>;
|
||||
};
|
||||
|
||||
fixed-rate-clocks {
|
||||
oscclk {
|
||||
compatible = "samsung,exynos5420-oscclk";
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
};
|
||||
|
||||
emmc_pwrseq: pwrseq {
|
||||
pinctrl-0 = <&emmc_nrst_pin>;
|
||||
pinctrl-names = "default";
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpd1 0 1>;
|
||||
};
|
||||
|
||||
pwmleds {
|
||||
compatible = "pwm-leds";
|
||||
|
||||
greenled {
|
||||
label = "green:mmc0";
|
||||
pwms = <&pwm 1 2000000 0>;
|
||||
pwm-names = "pwm1";
|
||||
/*
|
||||
* Green LED is much brighter than the others
|
||||
* so limit its max brightness
|
||||
*/
|
||||
max_brightness = <127>;
|
||||
linux,default-trigger = "mmc0";
|
||||
};
|
||||
|
||||
blueled {
|
||||
label = "blue:heartbeat";
|
||||
pwms = <&pwm 2 2000000 0>;
|
||||
pwm-names = "pwm2";
|
||||
max_brightness = <255>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
gpioleds {
|
||||
compatible = "gpio-leds";
|
||||
redled {
|
||||
label = "red:microSD";
|
||||
gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
linux,default-trigger = "mmc1";
|
||||
};
|
||||
};
|
||||
|
||||
sound: sound {
|
||||
compatible = "simple-audio-card";
|
||||
|
||||
simple-audio-card,name = "Odroid-XU3";
|
||||
simple-audio-card,widgets =
|
||||
"Headphone", "Headphone Jack",
|
||||
"Speakers", "Speakers";
|
||||
simple-audio-card,routing =
|
||||
"Headphone Jack", "HPL",
|
||||
"Headphone Jack", "HPR",
|
||||
"Headphone Jack", "MICBIAS",
|
||||
"IN1", "Headphone Jack",
|
||||
"Speakers", "SPKL",
|
||||
"Speakers", "SPKR";
|
||||
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,bitclock-master = <&link0_codec>;
|
||||
simple-audio-card,frame-master = <&link0_codec>;
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s0 0>;
|
||||
system-clock-frequency = <19200000>;
|
||||
};
|
||||
|
||||
link0_codec: simple-audio-card,codec {
|
||||
sound-dai = <&max98090>;
|
||||
clocks = <&i2s0 CLK_I2S_CDCLK>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&clock_audss {
|
||||
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
|
||||
<&clock_audss EXYNOS_MOUT_I2S>,
|
||||
<&clock_audss EXYNOS_DOUT_AUD_BUS>;
|
||||
assigned-clock-parents = <&clock CLK_FIN_PLL>,
|
||||
<&clock_audss EXYNOS_MOUT_AUDSS>;
|
||||
assigned-clock-rates = <0>,
|
||||
<0>,
|
||||
<19200000>;
|
||||
};
|
||||
|
||||
&fimd {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
||||
&hdmi {
|
||||
status = "okay";
|
||||
hpd-gpio = <&gpx3 7 0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_hpd_irq>;
|
||||
|
||||
vdd_osc-supply = <&ldo7_reg>;
|
||||
vdd_pll-supply = <&ldo6_reg>;
|
||||
vdd-supply = <&ldo6_reg>;
|
||||
};
|
||||
|
||||
&hsi2c_4 {
|
||||
status = "okay";
|
||||
|
||||
s2mps11_pmic@66 {
|
||||
compatible = "samsung,s2mps11-pmic";
|
||||
reg = <0x66>;
|
||||
s2mps11,buck2-ramp-delay = <12>;
|
||||
s2mps11,buck34-ramp-delay = <12>;
|
||||
s2mps11,buck16-ramp-delay = <12>;
|
||||
s2mps11,buck6-ramp-enable = <1>;
|
||||
s2mps11,buck2-ramp-enable = <1>;
|
||||
s2mps11,buck3-ramp-enable = <1>;
|
||||
s2mps11,buck4-ramp-enable = <1>;
|
||||
|
||||
interrupt-parent = <&gpx0>;
|
||||
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&s2mps11_irq>;
|
||||
|
||||
s2mps11_osc: clocks {
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "s2mps11_ap",
|
||||
"s2mps11_cp", "s2mps11_bt";
|
||||
};
|
||||
|
||||
regulators {
|
||||
ldo1_reg: LDO1 {
|
||||
regulator-name = "vdd_ldo1";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo3_reg: LDO3 {
|
||||
regulator-name = "vdd_ldo3";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo5_reg: LDO5 {
|
||||
regulator-name = "vdd_ldo5";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo6_reg: LDO6 {
|
||||
regulator-name = "vdd_ldo6";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo7_reg: LDO7 {
|
||||
regulator-name = "vdd_ldo7";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo8_reg: LDO8 {
|
||||
regulator-name = "vdd_ldo8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo9_reg: LDO9 {
|
||||
regulator-name = "vdd_ldo9";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo10_reg: LDO10 {
|
||||
regulator-name = "vdd_ldo10";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo11_reg: LDO11 {
|
||||
regulator-name = "vdd_ldo11";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo12_reg: LDO12 {
|
||||
regulator-name = "vdd_ldo12";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo13_reg: LDO13 {
|
||||
regulator-name = "vdd_ldo13";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo15_reg: LDO15 {
|
||||
regulator-name = "vdd_ldo15";
|
||||
regulator-min-microvolt = <3100000>;
|
||||
regulator-max-microvolt = <3100000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo16_reg: LDO16 {
|
||||
regulator-name = "vdd_ldo16";
|
||||
regulator-min-microvolt = <2200000>;
|
||||
regulator-max-microvolt = <2200000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo17_reg: LDO17 {
|
||||
regulator-name = "tsp_avdd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo19_reg: LDO19 {
|
||||
regulator-name = "vdd_sd";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo24_reg: LDO24 {
|
||||
regulator-name = "tsp_io";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo26_reg: LDO26 {
|
||||
regulator-name = "vdd_ldo26";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck1_reg: BUCK1 {
|
||||
regulator-name = "vdd_mif";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck2_reg: BUCK2 {
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck3_reg: BUCK3 {
|
||||
regulator-name = "vdd_int";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck4_reg: BUCK4 {
|
||||
regulator-name = "vdd_g3d";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck5_reg: BUCK5 {
|
||||
regulator-name = "vdd_mem";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck6_reg: BUCK6 {
|
||||
regulator-name = "vdd_kfc";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck7_reg: BUCK7 {
|
||||
regulator-name = "vdd_1.0v_ldo";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck8_reg: BUCK8 {
|
||||
regulator-name = "vdd_1.8v_ldo";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck9_reg: BUCK9 {
|
||||
regulator-name = "vdd_2.8v_ldo";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3750000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck10_reg: BUCK10 {
|
||||
regulator-name = "vdd_vmem";
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&hsi2c_5 {
|
||||
status = "okay";
|
||||
max98090: max98090@10 {
|
||||
compatible = "maxim,max98090";
|
||||
reg = <0x10>;
|
||||
interrupt-parent = <&gpx3>;
|
||||
interrupts = <2 0>;
|
||||
clocks = <&i2s0 CLK_I2S_CDCLK>;
|
||||
clock-names = "mclk";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c_2 {
|
||||
samsung,i2c-sda-delay = <100>;
|
||||
samsung,i2c-max-bus-freq = <66000>;
|
||||
status = "okay";
|
||||
|
||||
hdmiddc@50 {
|
||||
compatible = "samsung,exynos4210-hdmiddc";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mfc {
|
||||
samsung,mfc-r = <0x43000000 0x800000>;
|
||||
samsung,mfc-l = <0x51000000 0x800000>;
|
||||
};
|
||||
|
||||
&mmc_0 {
|
||||
status = "okay";
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
|
||||
card-detect-delay = <200>;
|
||||
samsung,dw-mshc-ciu-div = <3>;
|
||||
samsung,dw-mshc-sdr-timing = <0 4>;
|
||||
samsung,dw-mshc-ddr-timing = <0 2>;
|
||||
samsung,dw-mshc-hs400-timing = <0 2>;
|
||||
samsung,read-strobe-delay = <90>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-hs200-1_8v;
|
||||
mmc-hs400-1_8v;
|
||||
};
|
||||
|
||||
&mmc_2 {
|
||||
status = "okay";
|
||||
card-detect-delay = <200>;
|
||||
samsung,dw-mshc-ciu-div = <3>;
|
||||
samsung,dw-mshc-sdr-timing = <0 4>;
|
||||
samsung,dw-mshc-ddr-timing = <0 2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
};
|
||||
|
||||
&pinctrl_0 {
|
||||
hdmi_hpd_irq: hdmi-hpd-irq {
|
||||
samsung,pins = "gpx3-7";
|
||||
samsung,pin-function = <0>;
|
||||
samsung,pin-pud = <1>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
s2mps11_irq: s2mps11-irq {
|
||||
samsung,pins = "gpx0-4";
|
||||
samsung,pin-function = <0xf>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_1 {
|
||||
emmc_nrst_pin: emmc-nrst {
|
||||
samsung,pins = "gpd1-0";
|
||||
samsung,pin-function = <0>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pwm {
|
||||
/*
|
||||
* PWM 0 -- fan
|
||||
* PWM 1 -- Green LED
|
||||
* PWM 2 -- Blue LED
|
||||
* PWM 3 -- on MIPI connector for backlight
|
||||
*/
|
||||
pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rtc {
|
||||
status = "okay";
|
||||
clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
|
||||
clock-names = "rtc", "rtc_src";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_0 {
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_1 {
|
||||
dr_mode = "otg";
|
||||
};
|
||||
20
arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
Normal file
20
arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
Normal file
@ -0,0 +1,20 @@
|
||||
/*
|
||||
* Hardkernel Odroid XU3-Lite board device tree source
|
||||
*
|
||||
* Copyright (c) 2015 Krzysztof Kozlowski
|
||||
* Copyright (c) 2014 Collabora Ltd.
|
||||
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
|
||||
* http://www.samsung.com
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "exynos5422-odroidxu3-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Hardkernel Odroid XU3 Lite";
|
||||
compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
|
||||
};
|
||||
@ -11,374 +11,11 @@
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/clock/samsung,s2mps11.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/sound/samsung-i2s.h>
|
||||
#include "exynos5800.dtsi"
|
||||
#include "exynos5422-odroidxu3-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Hardkernel Odroid XU3";
|
||||
compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
|
||||
|
||||
memory {
|
||||
reg = <0x40000000 0x7EA00000>;
|
||||
};
|
||||
|
||||
chosen {
|
||||
linux,stdout-path = &serial_2;
|
||||
};
|
||||
|
||||
firmware@02073000 {
|
||||
compatible = "samsung,secure-firmware";
|
||||
reg = <0x02073000 0x1000>;
|
||||
};
|
||||
|
||||
fixed-rate-clocks {
|
||||
oscclk {
|
||||
compatible = "samsung,exynos5420-oscclk";
|
||||
clock-frequency = <24000000>;
|
||||
};
|
||||
};
|
||||
|
||||
emmc_pwrseq: pwrseq {
|
||||
pinctrl-0 = <&emmc_nrst_pin>;
|
||||
pinctrl-names = "default";
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpd1 0 1>;
|
||||
};
|
||||
|
||||
pwmleds {
|
||||
compatible = "pwm-leds";
|
||||
|
||||
greenled {
|
||||
label = "green:mmc0";
|
||||
pwms = <&pwm 1 2000000 0>;
|
||||
pwm-names = "pwm1";
|
||||
/*
|
||||
* Green LED is much brighter than the others
|
||||
* so limit its max brightness
|
||||
*/
|
||||
max_brightness = <127>;
|
||||
linux,default-trigger = "mmc0";
|
||||
};
|
||||
|
||||
blueled {
|
||||
label = "blue:heartbeat";
|
||||
pwms = <&pwm 2 2000000 0>;
|
||||
pwm-names = "pwm2";
|
||||
max_brightness = <255>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
gpioleds {
|
||||
compatible = "gpio-leds";
|
||||
redled {
|
||||
label = "red:microSD";
|
||||
gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
linux,default-trigger = "mmc1";
|
||||
};
|
||||
};
|
||||
|
||||
sound: sound {
|
||||
compatible = "simple-audio-card";
|
||||
|
||||
simple-audio-card,name = "Odroid-XU3";
|
||||
simple-audio-card,widgets =
|
||||
"Headphone", "Headphone Jack",
|
||||
"Speakers", "Speakers";
|
||||
simple-audio-card,routing =
|
||||
"Headphone Jack", "HPL",
|
||||
"Headphone Jack", "HPR",
|
||||
"Headphone Jack", "MICBIAS",
|
||||
"IN1", "Headphone Jack",
|
||||
"Speakers", "SPKL",
|
||||
"Speakers", "SPKR";
|
||||
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,bitclock-master = <&link0_codec>;
|
||||
simple-audio-card,frame-master = <&link0_codec>;
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s0 0>;
|
||||
system-clock-frequency = <19200000>;
|
||||
};
|
||||
|
||||
link0_codec: simple-audio-card,codec {
|
||||
sound-dai = <&max98090>;
|
||||
clocks = <&i2s0 CLK_I2S_CDCLK>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&clock_audss {
|
||||
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
|
||||
<&clock_audss EXYNOS_MOUT_I2S>,
|
||||
<&clock_audss EXYNOS_DOUT_AUD_BUS>;
|
||||
assigned-clock-parents = <&clock CLK_FIN_PLL>,
|
||||
<&clock_audss EXYNOS_MOUT_AUDSS>;
|
||||
assigned-clock-rates = <0>,
|
||||
<0>,
|
||||
<19200000>;
|
||||
};
|
||||
|
||||
&fimd {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
||||
&hdmi {
|
||||
status = "okay";
|
||||
hpd-gpio = <&gpx3 7 0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_hpd_irq>;
|
||||
|
||||
vdd_osc-supply = <&ldo7_reg>;
|
||||
vdd_pll-supply = <&ldo6_reg>;
|
||||
vdd-supply = <&ldo6_reg>;
|
||||
};
|
||||
|
||||
&hsi2c_4 {
|
||||
status = "okay";
|
||||
|
||||
s2mps11_pmic@66 {
|
||||
compatible = "samsung,s2mps11-pmic";
|
||||
reg = <0x66>;
|
||||
s2mps11,buck2-ramp-delay = <12>;
|
||||
s2mps11,buck34-ramp-delay = <12>;
|
||||
s2mps11,buck16-ramp-delay = <12>;
|
||||
s2mps11,buck6-ramp-enable = <1>;
|
||||
s2mps11,buck2-ramp-enable = <1>;
|
||||
s2mps11,buck3-ramp-enable = <1>;
|
||||
s2mps11,buck4-ramp-enable = <1>;
|
||||
|
||||
interrupt-parent = <&gpx0>;
|
||||
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&s2mps11_irq>;
|
||||
|
||||
s2mps11_osc: clocks {
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "s2mps11_ap",
|
||||
"s2mps11_cp", "s2mps11_bt";
|
||||
};
|
||||
|
||||
regulators {
|
||||
ldo1_reg: LDO1 {
|
||||
regulator-name = "vdd_ldo1";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo3_reg: LDO3 {
|
||||
regulator-name = "vdd_ldo3";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo5_reg: LDO5 {
|
||||
regulator-name = "vdd_ldo5";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo6_reg: LDO6 {
|
||||
regulator-name = "vdd_ldo6";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo7_reg: LDO7 {
|
||||
regulator-name = "vdd_ldo7";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo8_reg: LDO8 {
|
||||
regulator-name = "vdd_ldo8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo9_reg: LDO9 {
|
||||
regulator-name = "vdd_ldo9";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo10_reg: LDO10 {
|
||||
regulator-name = "vdd_ldo10";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo11_reg: LDO11 {
|
||||
regulator-name = "vdd_ldo11";
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo12_reg: LDO12 {
|
||||
regulator-name = "vdd_ldo12";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo13_reg: LDO13 {
|
||||
regulator-name = "vdd_ldo13";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo15_reg: LDO15 {
|
||||
regulator-name = "vdd_ldo15";
|
||||
regulator-min-microvolt = <3100000>;
|
||||
regulator-max-microvolt = <3100000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo16_reg: LDO16 {
|
||||
regulator-name = "vdd_ldo16";
|
||||
regulator-min-microvolt = <2200000>;
|
||||
regulator-max-microvolt = <2200000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo17_reg: LDO17 {
|
||||
regulator-name = "tsp_avdd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo19_reg: LDO19 {
|
||||
regulator-name = "vdd_sd";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo24_reg: LDO24 {
|
||||
regulator-name = "tsp_io";
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo26_reg: LDO26 {
|
||||
regulator-name = "vdd_ldo26";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
buck1_reg: BUCK1 {
|
||||
regulator-name = "vdd_mif";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck2_reg: BUCK2 {
|
||||
regulator-name = "vdd_arm";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck3_reg: BUCK3 {
|
||||
regulator-name = "vdd_int";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck4_reg: BUCK4 {
|
||||
regulator-name = "vdd_g3d";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck5_reg: BUCK5 {
|
||||
regulator-name = "vdd_mem";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck6_reg: BUCK6 {
|
||||
regulator-name = "vdd_kfc";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck7_reg: BUCK7 {
|
||||
regulator-name = "vdd_1.0v_ldo";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck8_reg: BUCK8 {
|
||||
regulator-name = "vdd_1.8v_ldo";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck9_reg: BUCK9 {
|
||||
regulator-name = "vdd_2.8v_ldo";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3750000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
buck10_reg: BUCK10 {
|
||||
regulator-name = "vdd_vmem";
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&hsi2c_5 {
|
||||
status = "okay";
|
||||
max98090: max98090@10 {
|
||||
compatible = "maxim,max98090";
|
||||
reg = <0x10>;
|
||||
interrupt-parent = <&gpx3>;
|
||||
interrupts = <2 0>;
|
||||
clocks = <&i2s0 CLK_I2S_CDCLK>;
|
||||
clock-names = "mclk";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c_0 {
|
||||
@ -412,104 +49,3 @@
|
||||
shunt-resistor = <10000>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c_2 {
|
||||
samsung,i2c-sda-delay = <100>;
|
||||
samsung,i2c-max-bus-freq = <66000>;
|
||||
status = "okay";
|
||||
|
||||
hdmiddc@50 {
|
||||
compatible = "samsung,exynos4210-hdmiddc";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mfc {
|
||||
samsung,mfc-r = <0x43000000 0x800000>;
|
||||
samsung,mfc-l = <0x51000000 0x800000>;
|
||||
};
|
||||
|
||||
&mmc_0 {
|
||||
status = "okay";
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
|
||||
card-detect-delay = <200>;
|
||||
samsung,dw-mshc-ciu-div = <3>;
|
||||
samsung,dw-mshc-sdr-timing = <0 4>;
|
||||
samsung,dw-mshc-ddr-timing = <0 2>;
|
||||
samsung,dw-mshc-hs400-timing = <0 2>;
|
||||
samsung,read-strobe-delay = <90>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-hs200-1_8v;
|
||||
mmc-hs400-1_8v;
|
||||
};
|
||||
|
||||
&mmc_2 {
|
||||
status = "okay";
|
||||
card-detect-delay = <200>;
|
||||
samsung,dw-mshc-ciu-div = <3>;
|
||||
samsung,dw-mshc-sdr-timing = <0 4>;
|
||||
samsung,dw-mshc-ddr-timing = <0 2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
};
|
||||
|
||||
&pinctrl_0 {
|
||||
hdmi_hpd_irq: hdmi-hpd-irq {
|
||||
samsung,pins = "gpx3-7";
|
||||
samsung,pin-function = <0>;
|
||||
samsung,pin-pud = <1>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
|
||||
s2mps11_irq: s2mps11-irq {
|
||||
samsung,pins = "gpx0-4";
|
||||
samsung,pin-function = <0xf>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_1 {
|
||||
emmc_nrst_pin: emmc-nrst {
|
||||
samsung,pins = "gpd1-0";
|
||||
samsung,pin-function = <0>;
|
||||
samsung,pin-pud = <0>;
|
||||
samsung,pin-drv = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pwm {
|
||||
/*
|
||||
* PWM 0 -- fan
|
||||
* PWM 1 -- Green LED
|
||||
* PWM 2 -- Blue LED
|
||||
* PWM 3 -- on MIPI connector for backlight
|
||||
*/
|
||||
pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&rtc {
|
||||
status = "okay";
|
||||
clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
|
||||
clock-names = "rtc", "rtc_src";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_0 {
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_1 {
|
||||
dr_mode = "otg";
|
||||
};
|
||||
|
||||
Loading…
Reference in New Issue
Block a user