mirror of
https://github.com/torvalds/linux.git
synced 2024-11-23 12:42:02 +00:00
ARM: at91/dt: Add Support for the L+G VInCo platform
The Versatile Industrial Communication platform is a community oriented
board from Landis + Gyr. It comes with:
- an RS-485 port
- 2 Ethernet ports
- a wireless M-BUS
- a 4G modem
- a 4MB SPI flash
- a 4GB eMMC
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This commit is contained in:
Gregory CLEMENT
Alexandre Belloni
parent
0a804b5729
commit
3869394ae4
@ -50,7 +50,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
|
||||
sama5d36ek.dtb \
|
||||
at91-sama5d4_ma5d4evk.dtb \
|
||||
at91-sama5d4_xplained.dtb \
|
||||
at91-sama5d4ek.dtb
|
||||
at91-sama5d4ek.dtb \
|
||||
at91-vinco.dtb
|
||||
dtb-$(CONFIG_ARCH_ATLAS6) += \
|
||||
atlas6-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_ATLAS7) += \
|
||||
|
||||
256
arch/arm/boot/dts/at91-vinco.dts
Normal file
256
arch/arm/boot/dts/at91-vinco.dts
Normal file
@ -0,0 +1,256 @@
|
||||
/*
|
||||
* Device Tree file for VInCo platform
|
||||
*
|
||||
* Copyright (C) 2014 Atmel,
|
||||
* 2014 Nicolas Ferre <nicolas.ferre@atmel.com>
|
||||
* 2015 Gregory CLEMENT <gregory.clement@free-electrons.com>
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
/dts-v1/;
|
||||
#include "sama5d4.dtsi"
|
||||
|
||||
/ {
|
||||
model = "L+G VInCo platform";
|
||||
compatible = "l+g,vinco", "atmel,sama5d4", "atmel,sama5";
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x20000000 0x4000000>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
slow_xtal {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
main_xtal {
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
};
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
|
||||
adc0: adc@fc034000 {
|
||||
status = "okay"; /* Enable ADC IIO support */
|
||||
};
|
||||
|
||||
mmc0: mmc@f8000000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
|
||||
&pinctrl_mmc0_dat1_3
|
||||
&pinctrl_mmc0_dat4_7>;
|
||||
vqmmc-supply = <&vcc_3v3_reg>;
|
||||
vmmc-supply = <&vcc_3v3_reg>;
|
||||
no-1-8-v;
|
||||
status = "okay";
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
broken-cd;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
spi0: spi@f8010000 {
|
||||
cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
|
||||
status = "okay";
|
||||
m25p80@0 {
|
||||
compatible = "n25q32b", "jedec,spi-nor";
|
||||
spi-max-frequency = <50000000>;
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c0: i2c@f8014000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c1: i2c@f8018000 {
|
||||
status = "okay";
|
||||
/* kerkey security module */
|
||||
};
|
||||
|
||||
macb0: ethernet@f8020000 {
|
||||
phy-mode = "rmii";
|
||||
status = "okay";
|
||||
|
||||
ethernet-phy@1 {
|
||||
reg = <0x1>;
|
||||
reset-gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
|
||||
interrupt-parent = <&pioB>;
|
||||
interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
i2c2: i2c@f8024000 {
|
||||
status = "okay";
|
||||
|
||||
rtc1: rtc@64 {
|
||||
compatible = "epson,rx8900";
|
||||
reg = <0x32>;
|
||||
};
|
||||
};
|
||||
|
||||
usart2: serial@fc008000 {
|
||||
/* MBUS */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usart3: serial@fc00c000 {
|
||||
/* debug */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usart4: serial@fc010000 {
|
||||
/* LMN */
|
||||
pinctrl-0 = <&pinctrl_usart4 &pinctrl_usart4_rts>;
|
||||
linux,rs485-enabled-at-boot-time;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
macb1: ethernet@fc028000 {
|
||||
phy-mode = "rmii";
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
ethernet-phy@1 {
|
||||
reg = <0x1>;
|
||||
interrupt-parent = <&pioB>;
|
||||
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
|
||||
reset-gpios = <&pioE 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
watchdog@fc068640 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pinctrl@fc06a000 {
|
||||
board {
|
||||
pinctrl_usba_vbus: usba_vbus {
|
||||
atmel,pins =
|
||||
<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
usb0: gadget@00400000 {
|
||||
atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usba_vbus>;
|
||||
status = "disable";
|
||||
};
|
||||
|
||||
usb1: ohci@00500000 {
|
||||
num-ports = <3>;
|
||||
atmel,vbus-gpio = <0
|
||||
&pioE 11 GPIO_ACTIVE_LOW
|
||||
&pioE 12 GPIO_ACTIVE_LOW
|
||||
>;
|
||||
status = "disable";
|
||||
};
|
||||
|
||||
usb2: ehci@00600000 {
|
||||
/* 4G Modem */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
status = "okay";
|
||||
|
||||
led_err {
|
||||
label = "err";
|
||||
gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led_rssi {
|
||||
label = "rssi";
|
||||
gpios = <&pioA 9 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led_tls {
|
||||
label = "tls";
|
||||
gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led_lmc {
|
||||
label = "lmc";
|
||||
gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led_wmt {
|
||||
label = "wmt";
|
||||
gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led_pwr {
|
||||
label = "pwr";
|
||||
gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
vcc_3v3_reg: fixedregulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC 3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user