Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-02 10:11:36 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'libertas-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes

Browse Source
This commit is contained in:
Jeff Garzik 2007-07-02 08:14:30 -04:00
commit 36f9d0c5e9
11 changed files with 79 additions and 1598 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/net/wireless/libertas/Makefile
View File

@ -2,7 +2,7 @@ libertas-objs := main.o fw.o wext.o \
rx.o tx.o cmd.o \
cmdresp.o scan.o \
join.o 11d.o \
ioctl.o debugfs.o \
debugfs.o \
ethtool.o assoc.o
usb8xxx-objs += if_bootcmd.o

275
drivers/net/wireless/libertas/README
View File

@ -28,281 +28,6 @@ DRIVER LOADING
insmod usb8388.ko [fw_name=usb8388.bin]
=====================
IWPRIV COMMAND
=====================
NAME
This manual describes the usage of private commands used in Marvell WLAN
Linux Driver. All the commands available in Wlanconfig will not be available
in the iwpriv.
SYNOPSIS
iwpriv <ethX> <command> [sub-command] ...
iwpriv ethX setregioncode <n>
iwpriv ethX getregioncode
Version 5 Command:
iwpriv ethX ledgpio <n>
BT Commands:
The blinding table (BT) contains a list of mac addresses that will be,
by default, ignored by the firmware. It is also possible to invert this
behavior so that we will ignore all traffic except for the portion
coming from mac addresess in the list. It is primarily used for
debugging and testing networks. It can be edited and inspected with
the following commands:
iwpriv ethX bt_reset
iwpriv ethX bt_add <mac_address>
iwpriv ethX bt_del <mac_address>
iwpriv ethX bt_list <id>
iwpriv ethX bt_get_invert <n>
iwpriv ethX bt_set_invert <n>
FWT Commands:
The forwarding table (FWT) is a feature used to manage mesh network
routing in the firmware. The FWT is essentially a routing table that
associates a destination mac address (da) with a next hop receiver
address (ra). The FWT can be inspected and edited with the following
iwpriv commands, which are described in greater detail below.
Eventually, the table will be automatically maintained by a custom
routing protocol.
NOTE: FWT commands replace the previous DFT commands. What were the DFT
commands?, you might ask. They were an earlier API to the firmware that
implemented a simple MAC-layer forwarding mechanism. In the unlikely
event that you were using these commands, you must migrate to the new
FWT commands which can be used to achieve the same functionality.
iwpriv ethX fwt_add [parameters]
iwpriv ethX fwt_del [parameters]
iwpriv ethX fwt_lookup [parameters]
iwpriv ethX fwt_list [parameters]
iwpriv ethX fwt_list_route [parameters]
iwpriv ethX fwt_list_neigh [parameters]
iwpriv ethX fwt_reset [parameters]
iwpriv ethX fwt_cleanup
iwpriv ethX fwt_time
MESH Commands:
The MESH commands are used to configure various features of the mesh
routing protocol. The following commands are supported:
iwpriv ethX mesh_get_ttl
iwpriv ethX mesh_set_ttl ttl
DESCRIPTION
Those commands are used to send additional commands to the Marvell WLAN
card via the Linux device driver.
The ethX parameter specifies the network device that is to be used to
perform this command on. it could be eth0, eth1 etc.
setregioncode
This command is used to set the region code in the station.
where value is 'region code' for various regions like
USA FCC, Canada IC, Spain, France, Europe ETSI, Japan ...
Usage:
iwpriv ethX setregioncode 0x10: set region code to USA (0x10).
getregioncode
This command is used to get the region code information set in the
station.
ledgpio
This command is used to set/get LEDs.
iwpriv ethX ledgpio <LEDs>
will set the corresponding LED for the GPIO Line.
iwpriv ethX ledgpio
will give u which LEDs are Enabled.
Usage:
iwpriv eth1 ledgpio 1 0 2 1 3 4
will enable
LED 1 -> GPIO 0
LED 2 -> GPIO 1
LED 3 -> GPIO 4
iwpriv eth1 ledgpio
shows LED information in the format as mentioned above.
Note: LED0 is invalid
Note: Maximum Number of LEDs are 16.
fwt_add
This command is used to insert an entry into the FWT table. The list of
parameters must follow the following structure:
iwpriv ethX fwt_add da ra [metric dir rate ssn dsn hopcount ttl expiration sleepmode snr]
The parameters between brackets are optional, but they must appear in
the order specified. For example, if you want to specify the metric,
you must also specify the dir, ssn, and dsn but you need not specify the
hopcount, expiration, sleepmode, or snr. Any unspecified parameters
will be assigned the defaults specified below.
The different parameters are:-
da -- DA MAC address in the form 00:11:22:33:44:55
ra -- RA MAC address in the form 00:11:22:33:44:55
metric -- route metric (cost: smaller-metric routes are
preferred, default is 0)
dir -- direction (1 for direct, 0 for reverse,
default is 1)
rate -- data rate used for transmission to the RA,
as specified for the rateadapt command,
default is 3 (11Mbps)
ssn -- Source Sequence Number (time at the RA for
reverse routes. Default is 0)
dsn -- Destination Sequence Number (time at the DA
for direct routes. Default is 0)
hopcount -- hop count (currently unused, default is 0)
ttl -- TTL (Only used in reverse entries)
expiration -- entry expiration (in ticks, where a tick is
1024us, or ~ 1ms. Use 0 for an indefinite
entry, default is 0)
sleepmode -- RA's sleep mode (currently unused, default is
0)
snr -- SNR in the link to RA (currently unused,
default is 0)
The command does not return anything.
fwt_del
This command is used to remove an entry to the FWT table. The list of
parameters must follow the following structure:
iwpriv ethX fwt_del da ra [dir]
where the different parameters are:-
da -- DA MAC address (in the form "00:11:22:33:44:55")
ra -- RA MAC address (in the form "00:11:22:33:44:55")
dir -- direction (1 for direct, 0 for reverse,
default is 1)
The command does not return anything.
fwt_lookup
This command is used to get the best route in the FWT table to a given
host. The only parameter is the MAC address of the host that is being
looked for.
iwpriv ethX fwt_lookup da
where:-
da -- DA MAC address (in the form "00:11:22:33:44:55")
The command returns an output string identical to the one returned by
fwt_list described below.
fwt_list
This command is used to list a route from the FWT table. The only
parameter is the index into the table. If you want to list all the
routes in a table, start with index=0, and keep listing until you get a
"(null)" string. Note that the indicies may change as the fwt is
updated. It is expected that most users will not use fwt_list directly,
but that a utility similar to the traditional route command will be used
to invoke fwt_list over and over.
iwpriv ethX fwt_list index
The output is a string of the following form:
da ra valid metric dir rate ssn dsn hopcount ttl expiration
sleepmode snr precursor
where the different fields are:-
da -- DA MAC address (in the form "00:11:22:33:44:55")
ra -- RA MAC address (in the form "00:11:22:33:44:55")
valid -- whether the route is valid (0 if not valid)
metric -- route metric (cost: smaller-metric routes are preferred)
dir -- direction (1 for direct, 0 for reverse)
rate -- data rate used for transmission to the RA,
as specified for the rateadapt command
ssn -- Source Sequence Number (time at the RA for reverse routes)
dsn -- Destination Sequence Number (time at the DA for direct routes)
hopcount -- hop count (currently unused)
ttl -- TTL (only used in reverse entries)
expiration -- entry expiration (in ticks, where a tick is 1024us, or ~ 1ms. Use 0 for an indefinite entry)
sleepmode -- RA's sleep mode (currently unused)
snr -- SNR in the link to RA (currently unused)
precursor -- predecessor in direct routes
fwt_list_route
This command is equivalent to fwt_list.
fwt_list_neigh
This command is used to list a neighbor from the FWT table. The only
parameter is the neighbor ID. If you want to list all the neighbors in a
table, start with nid=0, and keep incrementing nid until you get a
"(null)" string. Note that the nid from a fwt_list_route command can be
used as an input to this command. Also note that this command is meant
mostly for debugging. It is expected that users will use fwt_lookup.
One important reason for this is that the neighbor id may change as the
neighbor table is altered.
iwpriv ethX fwt_list_neigh nid
The output is a string of the following form:
ra sleepmode snr references
where the different fields are:-
ra -- RA MAC address (in the form "00:11:22:33:44:55")
sleepmode -- RA's sleep mode (currently unused)
snr -- SNR in the link to RA (currently unused)
references -- RA's reference counter
fwt_reset
This command is used to reset the FWT table, getting rid of all the
entries. There are no input parameters.
iwpriv ethX fwt_reset
The command does not return anything.
fwt_cleanup
This command is used to perform user-based garbage recollection. The
FWT table is checked, and all the entries that are expired or invalid
are cleaned. Note that this is exported to the driver for debugging
purposes, as garbage collection is also fired by the firmware when in
space problems. There are no input parameters.
iwpriv ethX fwt_cleanup
The command does returns the number of invalid/expired routes deleted.
fwt_time
This command returns a card's internal time representation. It is this
time that is used to represent the expiration times of FWT entries. The
number is not consistent from card to card; it is simply a timer count.
The fwt_time command is used to inspect the timer so that expiration
times reported by fwt_list can be properly interpreted.
iwpriv ethX fwt_time
mesh_get_ttl
The mesh ttl is the number of hops a mesh packet can traverse before it
is dropped. This parameter is used to prevent infinite loops in the
mesh network. The value returned by this function is the ttl assigned
to all mesh packets. Currently there is no way to control the ttl on a
per packet or per socket basis.
iwpriv ethX mesh_get_ttl
mesh_set_ttl ttl
Set the ttl. The argument must be between 0 and 255.
iwpriv ethX mesh_set_ttl <ttl>
=========================
ETHTOOL
=========================

28
drivers/net/wireless/libertas/assoc.c
View File

@ -323,6 +323,8 @@ static int assoc_helper_secinfo(wlan_private *priv,
{
wlan_adapter *adapter = priv->adapter;
int ret = 0;
u32 do_wpa;
u32 rsn = 0;
lbs_deb_enter(LBS_DEB_ASSOC);
@ -333,12 +335,34 @@ static int assoc_helper_secinfo(wlan_private *priv,
if (ret)
goto out;
/* enable/disable RSN */
/* If RSN is already enabled, don't try to enable it again, since
* ENABLE_RSN resets internal state machines and will clobber the
* 4-way WPA handshake.
*/
/* Get RSN enabled/disabled */
ret = libertas_prepare_and_send_command(priv,
cmd_802_11_enable_rsn,
cmd_act_set,
cmd_option_waitforrsp,
0, assoc_req);
0, &rsn);
if (ret) {
lbs_deb_assoc("Failed to get RSN status: %d", ret);
goto out;
}
/* Don't re-enable RSN if it's already enabled */
do_wpa = (assoc_req->secinfo.WPAenabled || assoc_req->secinfo.WPA2enabled);
if (do_wpa == rsn)
goto out;
/* Set RSN enabled/disabled */
rsn = do_wpa;
ret = libertas_prepare_and_send_command(priv,
cmd_802_11_enable_rsn,
cmd_act_set,
cmd_option_waitforrsp,
0, &rsn);
out:
lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);

12
drivers/net/wireless/libertas/cmd.c
View File

@ -228,17 +228,19 @@ static int wlan_cmd_802_11_enable_rsn(wlan_private * priv,
void * pdata_buf)
{
struct cmd_ds_802_11_enable_rsn *penableRSN = &cmd->params.enbrsn;
struct assoc_request * assoc_req = pdata_buf;
u32 * enable = pdata_buf;
lbs_deb_enter(LBS_DEB_CMD);
cmd->command = cpu_to_le16(cmd_802_11_enable_rsn);
cmd->size = cpu_to_le16(sizeof(*penableRSN) + S_DS_GEN);
penableRSN->action = cpu_to_le16(cmd_action);
if (assoc_req->secinfo.WPAenabled || assoc_req->secinfo.WPA2enabled) {
penableRSN->enable = cpu_to_le16(cmd_enable_rsn);
} else {
penableRSN->enable = cpu_to_le16(cmd_disable_rsn);
if (cmd_action == cmd_act_set) {
if (*enable)
penableRSN->enable = cpu_to_le16(cmd_enable_rsn);
else
penableRSN->enable = cpu_to_le16(cmd_enable_rsn);
}
lbs_deb_leave(LBS_DEB_CMD);

21
drivers/net/wireless/libertas/cmdresp.c
View File

@ -537,6 +537,24 @@ static int wlan_ret_get_log(wlan_private * priv,
return 0;
}
static int libertas_ret_802_11_enable_rsn(wlan_private * priv,
struct cmd_ds_command *resp)
{
struct cmd_ds_802_11_enable_rsn *enable_rsn = &resp->params.enbrsn;
wlan_adapter *adapter = priv->adapter;
u32 * pdata_buf = adapter->cur_cmd->pdata_buf;
lbs_deb_enter(LBS_DEB_CMD);
if (enable_rsn->action == cpu_to_le16(cmd_act_get)) {
if (pdata_buf)
*pdata_buf = (u32) le16_to_cpu(enable_rsn->enable);
}
lbs_deb_enter(LBS_DEB_CMD);
return 0;
}
static inline int handle_cmd_response(u16 respcmd,
struct cmd_ds_command *resp,
wlan_private *priv)
@ -610,7 +628,10 @@ static inline int handle_cmd_response(u16 respcmd,
case cmd_ret_802_11_authenticate:
case cmd_ret_802_11_radio_control:
case cmd_ret_802_11_beacon_stop:
break;
case cmd_ret_802_11_enable_rsn:
ret = libertas_ret_802_11_enable_rsn(priv, resp);
break;
case cmd_ret_802_11_data_rate:

2
drivers/net/wireless/libertas/hostcmd.h
View File

@ -503,7 +503,7 @@ struct cmd_ds_802_11_ad_hoc_join {
struct cmd_ds_802_11_enable_rsn {
__le16 action;
__le16 enable;
};
} __attribute__ ((packed));
struct MrvlIEtype_keyParamSet {
/* type ID */

1081
drivers/net/wireless/libertas/ioctl.c
View File

File diff suppressed because it is too large Load Diff

8
drivers/net/wireless/libertas/main.c
View File

@ -181,7 +181,8 @@ u16 libertas_region_code_to_index[MRVDRV_MAX_REGION_CODE] =
* @brief Get function for sysfs attribute anycast_mask
*/
static ssize_t libertas_anycast_get(struct device * dev,
struct device_attribute *attr, char * buf) {
struct device_attribute *attr, char * buf)
{
struct cmd_ds_mesh_access mesh_access;
memset(&mesh_access, 0, sizeof(mesh_access));
@ -197,7 +198,8 @@ static ssize_t libertas_anycast_get(struct device * dev,
* @brief Set function for sysfs attribute anycast_mask
*/
static ssize_t libertas_anycast_set(struct device * dev,
struct device_attribute *attr, const char * buf, size_t count) {
struct device_attribute *attr, const char * buf, size_t count)
{
struct cmd_ds_mesh_access mesh_access;
uint32_t datum;
@ -799,7 +801,6 @@ wlan_private *libertas_add_card(void *card, struct device *dmdev)
dev->open = wlan_open;
dev->hard_start_xmit = wlan_pre_start_xmit;
dev->stop = wlan_close;
dev->do_ioctl = libertas_do_ioctl;
dev->set_mac_address = wlan_set_mac_address;
dev->tx_timeout = wlan_tx_timeout;
dev->get_stats = wlan_get_stats;
@ -918,7 +919,6 @@ int libertas_add_mesh(wlan_private *priv, struct device *dev)
mesh_dev->open = mesh_open;
mesh_dev->hard_start_xmit = mesh_pre_start_xmit;
mesh_dev->stop = mesh_close;
mesh_dev->do_ioctl = libertas_do_ioctl;
mesh_dev->get_stats = wlan_get_stats;
mesh_dev->set_mac_address = wlan_set_mac_address;
mesh_dev->ethtool_ops = &libertas_ethtool_ops;

51
drivers/net/wireless/libertas/scan.c
View File

@ -214,38 +214,6 @@ done:
return matched;
}
/**
* @brief Post process the scan table after a new scan command has completed
*
* Inspect each entry of the scan table and try to find an entry that
* matches our current associated/joined network from the scan. If
* one is found, update the stored copy of the bssdescriptor for our
* current network.
*
* Debug dump the current scan table contents if compiled accordingly.
*
* @param priv A pointer to wlan_private structure
*
* @return void
*/
static void wlan_scan_process_results(wlan_private * priv)
{
wlan_adapter *adapter = priv->adapter;
struct bss_descriptor * iter_bss;
int i = 0;
if (adapter->connect_status == libertas_connected)
return;
mutex_lock(&adapter->lock);
list_for_each_entry (iter_bss, &adapter->network_list, list) {
lbs_deb_scan("Scan:(%02d) " MAC_FMT ", RSSI[%03d], SSID[%s]\n",
i++, MAC_ARG(iter_bss->bssid), (s32) iter_bss->rssi,
escape_essid(iter_bss->ssid, iter_bss->ssid_len));
}
mutex_unlock(&adapter->lock);
}
/**
* @brief Create a channel list for the driver to scan based on region info
*
@ -791,6 +759,10 @@ int wlan_scan_networks(wlan_private * priv,
u8 scancurrentchanonly;
int maxchanperscan;
int ret;
#ifdef CONFIG_LIBERTAS_DEBUG
struct bss_descriptor * iter_bss;
int i = 0;
#endif
lbs_deb_enter(LBS_DEB_ASSOC);
@ -832,11 +804,16 @@ int wlan_scan_networks(wlan_private * priv,
puserscanin,
full_scan);
/* Process the resulting scan table:
* - Remove any bad ssids
* - Update our current BSS information from scan data
*/
wlan_scan_process_results(priv);
#ifdef CONFIG_LIBERTAS_DEBUG
/* Dump the scan table */
mutex_lock(&adapter->lock);
list_for_each_entry (iter_bss, &adapter->network_list, list) {
lbs_deb_scan("Scan:(%02d) " MAC_FMT ", RSSI[%03d], SSID[%s]\n",
i++, MAC_ARG(iter_bss->bssid), (s32) iter_bss->rssi,
escape_essid(iter_bss->ssid, iter_bss->ssid_len));
}
mutex_unlock(&adapter->lock);
#endif
if (priv->adapter->connect_status == libertas_connected) {
netif_carrier_on(priv->dev);

152
drivers/net/wireless/libertas/wext.c
View File

@ -913,148 +913,6 @@ out:
return 0;
}
/*
* iwpriv settable callbacks
*/
static const iw_handler wlan_private_handler[] = {
NULL, /* SIOCIWFIRSTPRIV */
};
static const struct iw_priv_args wlan_private_args[] = {
/*
* { cmd, set_args, get_args, name }
*/
/* Using iwpriv sub-command feature */
{
WLAN_SETONEINT_GETNONE, /* IOCTL: 24 */
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
IW_PRIV_TYPE_NONE,
""},
{
WLANSETREGION,
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
IW_PRIV_TYPE_NONE,
"setregioncode"},
{
WLAN_SUBCMD_MESH_SET_TTL,
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
IW_PRIV_TYPE_NONE,
"mesh_set_ttl"},
{
WLAN_SETNONE_GETONEINT,
IW_PRIV_TYPE_NONE,
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
""},
{
WLANGETREGION,
IW_PRIV_TYPE_NONE,
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
"getregioncode"},
{
WLAN_SUBCMD_FWT_CLEANUP,
IW_PRIV_TYPE_NONE,
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
"fwt_cleanup"},
{
WLAN_SUBCMD_FWT_TIME,
IW_PRIV_TYPE_NONE,
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
"fwt_time"},
{
WLAN_SUBCMD_MESH_GET_TTL,
IW_PRIV_TYPE_NONE,
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
"mesh_get_ttl"},
{
WLAN_SETNONE_GETNONE,
IW_PRIV_TYPE_NONE,
IW_PRIV_TYPE_NONE,
""},
{
WLAN_SUBCMD_FWT_RESET,
IW_PRIV_TYPE_NONE,
IW_PRIV_TYPE_NONE,
"fwt_reset"},
{
WLAN_SUBCMD_BT_RESET,
IW_PRIV_TYPE_NONE,
IW_PRIV_TYPE_NONE,
"bt_reset"},
{
WLAN_SET128CHAR_GET128CHAR,
IW_PRIV_TYPE_CHAR | 128,
IW_PRIV_TYPE_CHAR | 128,
""},
/* BT Management */
{
WLAN_SUBCMD_BT_ADD,
IW_PRIV_TYPE_CHAR | 128,
IW_PRIV_TYPE_CHAR | 128,
"bt_add"},
{
WLAN_SUBCMD_BT_DEL,
IW_PRIV_TYPE_CHAR | 128,
IW_PRIV_TYPE_CHAR | 128,
"bt_del"},
{
WLAN_SUBCMD_BT_LIST,
IW_PRIV_TYPE_CHAR | 128,
IW_PRIV_TYPE_CHAR | 128,
"bt_list"},
{
WLAN_SUBCMD_BT_SET_INVERT,
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
IW_PRIV_TYPE_NONE,
"bt_set_invert"},
{
WLAN_SUBCMD_BT_GET_INVERT,
IW_PRIV_TYPE_NONE,
IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
"bt_get_invert"},
/* FWT Management */
{
WLAN_SUBCMD_FWT_ADD,
IW_PRIV_TYPE_CHAR | 128,
IW_PRIV_TYPE_CHAR | 128,
"fwt_add"},
{
WLAN_SUBCMD_FWT_DEL,
IW_PRIV_TYPE_CHAR | 128,
IW_PRIV_TYPE_CHAR | 128,
"fwt_del"},
{
WLAN_SUBCMD_FWT_LOOKUP,
IW_PRIV_TYPE_CHAR | 128,
IW_PRIV_TYPE_CHAR | 128,
"fwt_lookup"},
{
WLAN_SUBCMD_FWT_LIST_NEIGHBOR,
IW_PRIV_TYPE_CHAR | 128,
IW_PRIV_TYPE_CHAR | 128,
"fwt_list_neigh"},
{
WLAN_SUBCMD_FWT_LIST,
IW_PRIV_TYPE_CHAR | 128,
IW_PRIV_TYPE_CHAR | 128,
"fwt_list"},
{
WLAN_SUBCMD_FWT_LIST_ROUTE,
IW_PRIV_TYPE_CHAR | 128,
IW_PRIV_TYPE_CHAR | 128,
"fwt_list_route"},
{
WLAN_SET_GET_SIXTEEN_INT,
IW_PRIV_TYPE_INT | 16,
IW_PRIV_TYPE_INT | 16,
""},
{
WLAN_LED_GPIO_CTRL,
IW_PRIV_TYPE_INT | 16,
IW_PRIV_TYPE_INT | 16,
"ledgpio"},
};
static struct iw_statistics *wlan_get_wireless_stats(struct net_device *dev)
{
enum {
@ -2444,22 +2302,12 @@ static const iw_handler mesh_wlan_handler[] = {
};
struct iw_handler_def libertas_handler_def = {
.num_standard = sizeof(wlan_handler) / sizeof(iw_handler),
.num_private = sizeof(wlan_private_handler) / sizeof(iw_handler),
.num_private_args = sizeof(wlan_private_args) /
sizeof(struct iw_priv_args),
.standard = (iw_handler *) wlan_handler,
.private = (iw_handler *) wlan_private_handler,
.private_args = (struct iw_priv_args *)wlan_private_args,
.get_wireless_stats = wlan_get_wireless_stats,
};
struct iw_handler_def mesh_handler_def = {
.num_standard = sizeof(mesh_wlan_handler) / sizeof(iw_handler),
.num_private = sizeof(wlan_private_handler) / sizeof(iw_handler),
.num_private_args = sizeof(wlan_private_args) /
sizeof(struct iw_priv_args),
.standard = (iw_handler *) mesh_wlan_handler,
.private = (iw_handler *) wlan_private_handler,
.private_args = (struct iw_priv_args *)wlan_private_args,
.get_wireless_stats = wlan_get_wireless_stats,
};

45
drivers/net/wireless/libertas/wext.h
View File

@ -7,45 +7,6 @@
#define SUBCMD_OFFSET 4
#define SUBCMD_DATA(x) *((int *)(x->u.name + SUBCMD_OFFSET))
/** PRIVATE CMD ID */
#define WLANIOCTL SIOCIWFIRSTPRIV
#define WLAN_SETNONE_GETNONE (WLANIOCTL + 8)
#define WLAN_SUBCMD_BT_RESET 13
#define WLAN_SUBCMD_FWT_RESET 14
#define WLAN_SETNONE_GETONEINT (WLANIOCTL + 15)
#define WLANGETREGION 1
#define WLAN_SUBCMD_FWT_CLEANUP 15
#define WLAN_SUBCMD_FWT_TIME 16
#define WLAN_SUBCMD_MESH_GET_TTL 17
#define WLAN_SUBCMD_BT_GET_INVERT 18
#define WLAN_SETONEINT_GETNONE (WLANIOCTL + 24)
#define WLANSETREGION 8
#define WLAN_SUBCMD_MESH_SET_TTL 18
#define WLAN_SUBCMD_BT_SET_INVERT 19
#define WLAN_SET128CHAR_GET128CHAR (WLANIOCTL + 25)
#define WLAN_SUBCMD_BT_ADD 18
#define WLAN_SUBCMD_BT_DEL 19
#define WLAN_SUBCMD_BT_LIST 20
#define WLAN_SUBCMD_FWT_ADD 21
#define WLAN_SUBCMD_FWT_DEL 22
#define WLAN_SUBCMD_FWT_LOOKUP 23
#define WLAN_SUBCMD_FWT_LIST_NEIGHBOR 24
#define WLAN_SUBCMD_FWT_LIST 25
#define WLAN_SUBCMD_FWT_LIST_ROUTE 26
#define WLAN_SET_GET_SIXTEEN_INT (WLANIOCTL + 29)
#define WLAN_LED_GPIO_CTRL 5
#define WLAN_LINKMODE_802_3 0
#define WLAN_LINKMODE_802_11 2
#define WLAN_RADIOMODE_NONE 0
#define WLAN_RADIOMODE_RADIOTAP 2
/** wlan_ioctl_regrdwr */
struct wlan_ioctl_regrdwr {
/** Which register to access */
@ -57,9 +18,13 @@ struct wlan_ioctl_regrdwr {
u32 value;
};
#define WLAN_LINKMODE_802_3 0
#define WLAN_LINKMODE_802_11 2
#define WLAN_RADIOMODE_NONE 0
#define WLAN_RADIOMODE_RADIOTAP 2
extern struct iw_handler_def libertas_handler_def;
extern struct iw_handler_def mesh_handler_def;
int libertas_do_ioctl(struct net_device *dev, struct ifreq *req, int i);
int wlan_radio_ioctl(wlan_private * priv, u8 option);
#endif /* _WLAN_WEXT_H_ */