diff --git a/drivers/net/ethernet/mscc/ocelot.c b/drivers/net/ethernet/mscc/ocelot.c index f4e027a6fe95..3d72aa7b1305 100644 --- a/drivers/net/ethernet/mscc/ocelot.c +++ b/drivers/net/ethernet/mscc/ocelot.c @@ -453,9 +453,158 @@ static u16 ocelot_vlan_unaware_pvid(struct ocelot *ocelot, return VLAN_N_VID - bridge_num - 1; } +/** + * ocelot_update_vlan_reclassify_rule() - Make switch aware only to bridge VLAN TPID + * + * @ocelot: Switch private data structure + * @port: Index of ingress port + * + * IEEE 802.1Q-2018 clauses "5.5 C-VLAN component conformance" and "5.6 S-VLAN + * component conformance" suggest that a C-VLAN component should only recognize + * and filter on C-Tags, and an S-VLAN component should only recognize and + * process based on C-Tags. + * + * In Linux, as per commit 1a0b20b25732 ("Merge branch 'bridge-next'"), C-VLAN + * components are largely represented by a bridge with vlan_protocol 802.1Q, + * and S-VLAN components by a bridge with vlan_protocol 802.1ad. + * + * Currently the driver only offloads vlan_protocol 802.1Q, but the hardware + * design is non-conformant, because the switch assigns each frame to a VLAN + * based on an entirely different question, as detailed in figure "Basic VLAN + * Classification Flow" from its manual and reproduced below. + * + * Set TAG_TYPE, PCP, DEI, VID to port-default values in VLAN_CFG register + * if VLAN_AWARE_ENA[port] and frame has outer tag then: + * if VLAN_INNER_TAG_ENA[port] and frame has inner tag then: + * TAG_TYPE = (Frame.InnerTPID <> 0x8100) + * Set PCP, DEI, VID to values from inner VLAN header + * else: + * TAG_TYPE = (Frame.OuterTPID <> 0x8100) + * Set PCP, DEI, VID to values from outer VLAN header + * if VID == 0 then: + * VID = VLAN_CFG.VLAN_VID + * + * Summarized, the switch will recognize both 802.1Q and 802.1ad TPIDs as VLAN + * "with equal rights", and just set the TAG_TYPE bit to 0 (if 802.1Q) or to 1 + * (if 802.1ad). It will classify based on whichever of the tags is "outer", no + * matter what TPID that may have (or "inner", if VLAN_INNER_TAG_ENA[port]). + * + * In the VLAN Table, the TAG_TYPE information is not accessible - just the + * classified VID is - so it is as if each VLAN Table entry is for 2 VLANs: + * C-VLAN X, and S-VLAN X. + * + * Whereas the Linux bridge behavior is to only filter on frames with a TPID + * equal to the vlan_protocol, and treat everything else as VLAN-untagged. + * + * Consider an ingress packet tagged with 802.1ad VID=3 and 802.1Q VID=5, + * received on a bridge vlan_filtering=1 vlan_protocol=802.1Q port. This frame + * should be treated as 802.1Q-untagged, and classified to the PVID of that + * bridge port. Not to VID=3, and not to VID=5. + * + * The VCAP IS1 TCAM has everything we need to overwrite the choices made in + * the basic VLAN classification pipeline: it can match on TAG_TYPE in the key, + * and it can modify the classified VID in the action. Thus, for each port + * under a vlan_filtering bridge, we can insert a rule in VCAP IS1 lookup 0 to + * match on 802.1ad tagged frames and modify their classified VID to the 802.1Q + * PVID of the port. This effectively makes it appear to the outside world as + * if those packets were processed as VLAN-untagged. + * + * The rule needs to be updated each time the bridge PVID changes, and needs + * to be deleted if the bridge PVID is deleted, or if the port becomes + * VLAN-unaware. + */ +static int ocelot_update_vlan_reclassify_rule(struct ocelot *ocelot, int port) +{ + unsigned long cookie = OCELOT_VCAP_IS1_VLAN_RECLASSIFY(ocelot, port); + struct ocelot_vcap_block *block_vcap_is1 = &ocelot->block[VCAP_IS1]; + struct ocelot_port *ocelot_port = ocelot->ports[port]; + const struct ocelot_bridge_vlan *pvid_vlan; + struct ocelot_vcap_filter *filter; + int err, val, pcp, dei; + bool vid_replace_ena; + u16 vid; + + pvid_vlan = ocelot_port->pvid_vlan; + vid_replace_ena = ocelot_port->vlan_aware && pvid_vlan; + + filter = ocelot_vcap_block_find_filter_by_id(block_vcap_is1, cookie, + false); + if (!vid_replace_ena) { + /* If the reclassification filter doesn't need to exist, delete + * it if it was previously installed, and exit doing nothing + * otherwise. + */ + if (filter) + return ocelot_vcap_filter_del(ocelot, filter); + + return 0; + } + + /* The reclassification rule must apply. See if it already exists + * or if it must be created. + */ + + /* Treating as VLAN-untagged means using as classified VID equal to + * the bridge PVID, and PCP/DEI set to the port default QoS values. + */ + vid = pvid_vlan->vid; + val = ocelot_read_gix(ocelot, ANA_PORT_QOS_CFG, port); + pcp = ANA_PORT_QOS_CFG_QOS_DEFAULT_VAL_X(val); + dei = !!(val & ANA_PORT_QOS_CFG_DP_DEFAULT_VAL); + + if (filter) { + bool changed = false; + + /* Filter exists, just update it */ + if (filter->action.vid != vid) { + filter->action.vid = vid; + changed = true; + } + if (filter->action.pcp != pcp) { + filter->action.pcp = pcp; + changed = true; + } + if (filter->action.dei != dei) { + filter->action.dei = dei; + changed = true; + } + + if (!changed) + return 0; + + return ocelot_vcap_filter_replace(ocelot, filter); + } + + /* Filter doesn't exist, create it */ + filter = kzalloc(sizeof(*filter), GFP_KERNEL); + if (!filter) + return -ENOMEM; + + filter->key_type = OCELOT_VCAP_KEY_ANY; + filter->ingress_port_mask = BIT(port); + filter->vlan.tpid = OCELOT_VCAP_BIT_1; + filter->prio = 1; + filter->id.cookie = cookie; + filter->id.tc_offload = false; + filter->block_id = VCAP_IS1; + filter->type = OCELOT_VCAP_FILTER_OFFLOAD; + filter->lookup = 0; + filter->action.vid_replace_ena = true; + filter->action.pcp_dei_ena = true; + filter->action.vid = vid; + filter->action.pcp = pcp; + filter->action.dei = dei; + + err = ocelot_vcap_filter_add(ocelot, filter, NULL); + if (err) + kfree(filter); + + return err; +} + /* Default vlan to clasify for untagged frames (may be zero) */ -static void ocelot_port_set_pvid(struct ocelot *ocelot, int port, - const struct ocelot_bridge_vlan *pvid_vlan) +static int ocelot_port_set_pvid(struct ocelot *ocelot, int port, + const struct ocelot_bridge_vlan *pvid_vlan) { struct ocelot_port *ocelot_port = ocelot->ports[port]; u16 pvid = ocelot_vlan_unaware_pvid(ocelot, ocelot_port->bridge); @@ -475,15 +624,23 @@ static void ocelot_port_set_pvid(struct ocelot *ocelot, int port, * happens automatically), but also 802.1p traffic which gets * classified to VLAN 0, but that is always in our RX filter, so it * would get accepted were it not for this setting. + * + * Also, we only support the bridge 802.1Q VLAN protocol, so + * 802.1ad-tagged frames (carrying S-Tags) should be considered + * 802.1Q-untagged, and also dropped. */ if (!pvid_vlan && ocelot_port->vlan_aware) val = ANA_PORT_DROP_CFG_DROP_PRIO_S_TAGGED_ENA | - ANA_PORT_DROP_CFG_DROP_PRIO_C_TAGGED_ENA; + ANA_PORT_DROP_CFG_DROP_PRIO_C_TAGGED_ENA | + ANA_PORT_DROP_CFG_DROP_S_TAGGED_ENA; ocelot_rmw_gix(ocelot, val, ANA_PORT_DROP_CFG_DROP_PRIO_S_TAGGED_ENA | - ANA_PORT_DROP_CFG_DROP_PRIO_C_TAGGED_ENA, + ANA_PORT_DROP_CFG_DROP_PRIO_C_TAGGED_ENA | + ANA_PORT_DROP_CFG_DROP_S_TAGGED_ENA, ANA_PORT_DROP_CFG, port); + + return ocelot_update_vlan_reclassify_rule(ocelot, port); } static struct ocelot_bridge_vlan *ocelot_bridge_vlan_find(struct ocelot *ocelot, @@ -631,7 +788,10 @@ int ocelot_port_vlan_filtering(struct ocelot *ocelot, int port, ANA_PORT_VLAN_CFG_VLAN_POP_CNT_M, ANA_PORT_VLAN_CFG, port); - ocelot_port_set_pvid(ocelot, port, ocelot_port->pvid_vlan); + err = ocelot_port_set_pvid(ocelot, port, ocelot_port->pvid_vlan); + if (err) + return err; + ocelot_port_manage_port_tag(ocelot, port); return 0; @@ -684,9 +844,12 @@ int ocelot_vlan_add(struct ocelot *ocelot, int port, u16 vid, bool pvid, return err; /* Default ingress vlan classification */ - if (pvid) - ocelot_port_set_pvid(ocelot, port, - ocelot_bridge_vlan_find(ocelot, vid)); + if (pvid) { + err = ocelot_port_set_pvid(ocelot, port, + ocelot_bridge_vlan_find(ocelot, vid)); + if (err) + return err; + } /* Untagged egress vlan clasification */ ocelot_port_manage_port_tag(ocelot, port); @@ -712,8 +875,11 @@ int ocelot_vlan_del(struct ocelot *ocelot, int port, u16 vid) return err; /* Ingress */ - if (del_pvid) - ocelot_port_set_pvid(ocelot, port, NULL); + if (del_pvid) { + err = ocelot_port_set_pvid(ocelot, port, NULL); + if (err) + return err; + } /* Egress */ ocelot_port_manage_port_tag(ocelot, port); @@ -2607,7 +2773,7 @@ int ocelot_port_set_default_prio(struct ocelot *ocelot, int port, u8 prio) ANA_PORT_QOS_CFG, port); - return 0; + return ocelot_update_vlan_reclassify_rule(ocelot, port); } EXPORT_SYMBOL_GPL(ocelot_port_set_default_prio); diff --git a/drivers/net/ethernet/mscc/ocelot_vcap.c b/drivers/net/ethernet/mscc/ocelot_vcap.c index 73cdec5ca6a3..5734b86aed5b 100644 --- a/drivers/net/ethernet/mscc/ocelot_vcap.c +++ b/drivers/net/ethernet/mscc/ocelot_vcap.c @@ -695,6 +695,7 @@ static void is1_entry_set(struct ocelot *ocelot, int ix, vcap_key_bit_set(vcap, &data, VCAP_IS1_HK_L2_MC, filter->dmac_mc); vcap_key_bit_set(vcap, &data, VCAP_IS1_HK_L2_BC, filter->dmac_bc); vcap_key_bit_set(vcap, &data, VCAP_IS1_HK_VLAN_TAGGED, tag->tagged); + vcap_key_bit_set(vcap, &data, VCAP_IS1_HK_TPID, tag->tpid); vcap_key_set(vcap, &data, VCAP_IS1_HK_VID, tag->vid.value, tag->vid.mask); vcap_key_set(vcap, &data, VCAP_IS1_HK_PCP, diff --git a/include/soc/mscc/ocelot_vcap.h b/include/soc/mscc/ocelot_vcap.h index c601a4598b0d..eb19668a06db 100644 --- a/include/soc/mscc/ocelot_vcap.h +++ b/include/soc/mscc/ocelot_vcap.h @@ -13,6 +13,7 @@ */ #define OCELOT_VCAP_ES0_TAG_8021Q_RXVLAN(ocelot, port, upstream) ((upstream) << 16 | (port)) #define OCELOT_VCAP_IS1_TAG_8021Q_TXVLAN(ocelot, port) (port) +#define OCELOT_VCAP_IS1_VLAN_RECLASSIFY(ocelot, port) ((ocelot)->num_phys_ports + (port)) #define OCELOT_VCAP_IS2_TAG_8021Q_TXVLAN(ocelot, port) (port) #define OCELOT_VCAP_IS2_MRP_REDIRECT(ocelot, port) ((ocelot)->num_phys_ports + (port)) #define OCELOT_VCAP_IS2_MRP_TRAP(ocelot) ((ocelot)->num_phys_ports * 2) @@ -499,6 +500,7 @@ struct ocelot_vcap_key_vlan { struct ocelot_vcap_u8 pcp; /* PCP (3 bit) */ enum ocelot_vcap_bit dei; /* DEI */ enum ocelot_vcap_bit tagged; /* Tagged/untagged frame */ + enum ocelot_vcap_bit tpid; }; struct ocelot_vcap_key_etype {