mirror of
https://github.com/torvalds/linux.git
synced 2024-11-24 21:21:41 +00:00
hwmon: (pmbus) Add support for Infineon XDP710
Add support for Infineon XDP710.This is a Hot-Swap Controller. Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> Link: https://lore.kernel.org/r/20240425153608.4003782-2-peteryin.openbmc@gmail.com [groeck: s/microOhmRsense/micro_ohm_osense/g; declared array static] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Peter Yin
Guenter Roeck
parent
cffa8fb56a
commit
35fe06d94e
@ -251,6 +251,7 @@ Hardware Monitoring Kernel Drivers
|
||||
wm831x
|
||||
wm8350
|
||||
xgene-hwmon
|
||||
xdp710
|
||||
xdpe12284
|
||||
xdpe152c4
|
||||
zl6100
|
||||
|
||||
83
Documentation/hwmon/xdp710.rst
Normal file
83
Documentation/hwmon/xdp710.rst
Normal file
@ -0,0 +1,83 @@
|
||||
.. SPDX-License-Identifier: GPL-2.0
|
||||
|
||||
Kernel driver xdp710
|
||||
====================
|
||||
|
||||
Supported chips:
|
||||
|
||||
* Infineon XDP710
|
||||
|
||||
Prefix: 'xdp710'
|
||||
|
||||
* Datasheet
|
||||
|
||||
Publicly available at the Infineon website : https://www.infineon.com/dgdl/Infineon-XDP710-001-DataSheet-v01_00-EN.pdf?fileId=8ac78c8c8412f8d301848a5316290b97
|
||||
|
||||
Author:
|
||||
|
||||
Peter Yin <peteryin.openbmc@gmail.com>
|
||||
|
||||
Description
|
||||
-----------
|
||||
|
||||
This driver implements support for Infineon XDP710 Hot-Swap Controller.
|
||||
|
||||
Device compliant with:
|
||||
|
||||
- PMBus rev 1.3 interface.
|
||||
|
||||
Device supports direct and linear format for reading input voltage,
|
||||
output voltage, output current, input power and temperature.
|
||||
|
||||
The driver exports the following attributes via the 'sysfs' files
|
||||
for input voltage:
|
||||
|
||||
**in1_input**
|
||||
|
||||
**in1_label**
|
||||
|
||||
**in1_max**
|
||||
|
||||
**in1_max_alarm**
|
||||
|
||||
**in1_min**
|
||||
|
||||
**in1_min_alarm**
|
||||
|
||||
The driver provides the following attributes for output voltage:
|
||||
|
||||
**in2_input**
|
||||
|
||||
**in2_label**
|
||||
|
||||
**in2_alarm**
|
||||
|
||||
The driver provides the following attributes for output current:
|
||||
|
||||
**curr1_input**
|
||||
|
||||
**curr1_label**
|
||||
|
||||
**curr1_alarm**
|
||||
|
||||
**curr1_max**
|
||||
|
||||
The driver provides the following attributes for input power:
|
||||
|
||||
**power1_input**
|
||||
|
||||
**power1_label**
|
||||
|
||||
**power1_alarm**
|
||||
|
||||
The driver provides the following attributes for temperature:
|
||||
|
||||
**temp1_input**
|
||||
|
||||
**temp1_max**
|
||||
|
||||
**temp1_max_alarm**
|
||||
|
||||
**temp1_crit**
|
||||
|
||||
**temp1_crit_alarm**
|
||||
@ -521,6 +521,15 @@ config SENSORS_UCD9200
|
||||
This driver can also be built as a module. If so, the module will
|
||||
be called ucd9200.
|
||||
|
||||
config SENSORS_XDP710
|
||||
tristate "Infineon XDP710 family"
|
||||
help
|
||||
If you say yes here you get hardware monitoring support for Infineon
|
||||
XDP710.
|
||||
|
||||
This driver can also be built as a module. If so, the module will
|
||||
be called xdp710.
|
||||
|
||||
config SENSORS_XDPE152
|
||||
tristate "Infineon XDPE152 family"
|
||||
help
|
||||
|
||||
@ -52,6 +52,7 @@ obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o
|
||||
obj-$(CONFIG_SENSORS_TPS546D24) += tps546d24.o
|
||||
obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o
|
||||
obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o
|
||||
obj-$(CONFIG_SENSORS_XDP710) += xdp710.o
|
||||
obj-$(CONFIG_SENSORS_XDPE122) += xdpe12284.o
|
||||
obj-$(CONFIG_SENSORS_XDPE152) += xdpe152c4.o
|
||||
obj-$(CONFIG_SENSORS_ZL6100) += zl6100.o
|
||||
|
||||
131
drivers/hwmon/pmbus/xdp710.c
Normal file
131
drivers/hwmon/pmbus/xdp710.c
Normal file
@ -0,0 +1,131 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
/*
|
||||
* Driver for Infineon XDP710 Hot-Swap Controller
|
||||
*/
|
||||
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of_device.h>
|
||||
#include "pmbus.h"
|
||||
|
||||
#define XDP710_REG_CFG 0xD3
|
||||
#define XDP710_V_SNS_CFG 0xD4
|
||||
#define XDP710_CS_RNG 0xD5
|
||||
|
||||
/*
|
||||
* The table to map configuration register values
|
||||
* to sense resistor values
|
||||
*/
|
||||
static const int micro_ohm_rsense[] = {
|
||||
200, 250, 300, 330, 400, 470, 500, 600,
|
||||
670, 700, 750, 800, 900, 1000, 1100, 1200,
|
||||
1250, 1300, 1400, 1500, 1600, 1700, 1800, 1900,
|
||||
2000, 2100, 2200, 2300, 2400, 2500, 2600, 2700,
|
||||
2800, 3000, 3100, 3200, 3300, 3400, 3500, 3600,
|
||||
3700, 3800, 3900, 4000, 4100, 4200, 4300, 4400,
|
||||
4500, 4600, 4700, 4800, 4900, 5000, 5500, 6000,
|
||||
6500, 7000, 7500, 8000, 8500, 9000, 9500, 10000
|
||||
};
|
||||
|
||||
static struct pmbus_driver_info xdp710_info = {
|
||||
.pages = 1,
|
||||
.format[PSC_VOLTAGE_IN] = direct,
|
||||
.format[PSC_VOLTAGE_OUT] = direct,
|
||||
.format[PSC_CURRENT_OUT] = direct,
|
||||
.format[PSC_POWER] = direct,
|
||||
.format[PSC_TEMPERATURE] = direct,
|
||||
.m[PSC_VOLTAGE_IN] = 4653,
|
||||
.b[PSC_VOLTAGE_IN] = 0,
|
||||
.R[PSC_VOLTAGE_IN] = -2,
|
||||
.m[PSC_VOLTAGE_OUT] = 4653,
|
||||
.b[PSC_VOLTAGE_OUT] = 0,
|
||||
.R[PSC_VOLTAGE_OUT] = -2,
|
||||
.m[PSC_CURRENT_OUT] = 23165,
|
||||
.b[PSC_CURRENT_OUT] = 0,
|
||||
.R[PSC_CURRENT_OUT] = -2,
|
||||
.m[PSC_POWER] = 4211,
|
||||
.b[PSC_POWER] = 0,
|
||||
.R[PSC_POWER] = -2,
|
||||
.m[PSC_TEMPERATURE] = 52,
|
||||
.b[PSC_TEMPERATURE] = 14321,
|
||||
.R[PSC_TEMPERATURE] = -1,
|
||||
.func[0] =
|
||||
PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_PIN |
|
||||
PMBUS_HAVE_TEMP | PMBUS_HAVE_IOUT |
|
||||
PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
|
||||
};
|
||||
|
||||
static int xdp710_probe(struct i2c_client *client)
|
||||
{
|
||||
struct pmbus_driver_info *info;
|
||||
u8 cs_rng;
|
||||
u8 vtlm_rng;
|
||||
int rsense;
|
||||
int ret;
|
||||
int m = 0;
|
||||
|
||||
info = devm_kmemdup(&client->dev, &xdp710_info, sizeof(*info),
|
||||
GFP_KERNEL);
|
||||
if (!info)
|
||||
return -ENOMEM;
|
||||
|
||||
ret = i2c_smbus_read_word_data(client, XDP710_CS_RNG);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "Can't get CS_RNG");
|
||||
return ret;
|
||||
}
|
||||
cs_rng = (ret >> 6) & GENMASK(1, 0);
|
||||
|
||||
ret = i2c_smbus_read_word_data(client, XDP710_V_SNS_CFG);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "Can't get V_SNS_CFG");
|
||||
return ret;
|
||||
}
|
||||
vtlm_rng = ret & GENMASK(1, 0);
|
||||
|
||||
ret = i2c_smbus_read_word_data(client, XDP710_REG_CFG);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "Can't get REG_CFG");
|
||||
return ret;
|
||||
}
|
||||
ret &= GENMASK(5, 0);
|
||||
rsense = micro_ohm_rsense[ret];
|
||||
|
||||
info->m[PSC_VOLTAGE_IN] <<= vtlm_rng;
|
||||
info->m[PSC_VOLTAGE_OUT] <<= vtlm_rng;
|
||||
|
||||
m = info->m[PSC_CURRENT_OUT];
|
||||
info->m[PSC_CURRENT_OUT] = DIV_ROUND_CLOSEST(m * rsense >> cs_rng, 1000);
|
||||
|
||||
m = info->m[PSC_POWER];
|
||||
info->m[PSC_POWER] = DIV_ROUND_CLOSEST(m * rsense >> cs_rng, 1000);
|
||||
|
||||
return pmbus_do_probe(client, info);
|
||||
}
|
||||
|
||||
static const struct of_device_id xdp710_of_match[] = {
|
||||
{ .compatible = "infineon,xdp710" },
|
||||
{}
|
||||
};
|
||||
|
||||
static const struct i2c_device_id xdp710_id[] = {
|
||||
{"xdp710", 0},
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, xdp710_id);
|
||||
|
||||
static struct i2c_driver xdp710_driver = {
|
||||
.driver = {
|
||||
.name = "xdp710",
|
||||
.of_match_table = xdp710_of_match,
|
||||
},
|
||||
.probe = xdp710_probe,
|
||||
.id_table = xdp710_id,
|
||||
};
|
||||
module_i2c_driver(xdp710_driver);
|
||||
|
||||
MODULE_AUTHOR("Peter Yin <peter.yin@quantatw.com>");
|
||||
MODULE_DESCRIPTION("PMBus driver for XDP710 HSC");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_IMPORT_NS(PMBUS);
|
||||
Loading…
Reference in New Issue
Block a user