KVM: ARM: Hypervisor initialization

Sets up KVM code to handle all exceptions taken to Hyp mode.

When the kernel is booted in Hyp mode, calling an hvc instruction with r0
pointing to the new vectors, the HVBAR is changed to the the vector pointers.
This allows subsystems (like KVM here) to execute code in Hyp-mode with the
MMU disabled.

We initialize other Hyp-mode registers and enables the MMU for Hyp-mode from
the id-mapped hyp initialization code. Afterwards, the HVBAR is changed to
point to KVM Hyp vectors used to catch guest faults and to switch to Hyp mode
to perform a world-switch into a KVM guest.

Also provides memory mapping code to map required code pages, data structures,
and I/O regions  accessed in Hyp mode at the same virtual address as the host
kernel virtual addresses, but which conforms to the architectural requirements
for translations in Hyp mode. This interface is added in arch/arm/kvm/arm_mmu.c
and comprises:
 - create_hyp_mappings(from, to);
 - create_hyp_io_mappings(from, to, phys_addr);
 - free_hyp_pmds();

Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
This commit is contained in:
Christoffer Dall 2013-01-20 18:28:06 -05:00
parent 749cf76c5a
commit 342cd0ab0e
9 changed files with 755 additions and 0 deletions

View File

@ -21,4 +21,128 @@
#include <linux/types.h>
/* Hyp Configuration Register (HCR) bits */
#define HCR_TGE (1 << 27)
#define HCR_TVM (1 << 26)
#define HCR_TTLB (1 << 25)
#define HCR_TPU (1 << 24)
#define HCR_TPC (1 << 23)
#define HCR_TSW (1 << 22)
#define HCR_TAC (1 << 21)
#define HCR_TIDCP (1 << 20)
#define HCR_TSC (1 << 19)
#define HCR_TID3 (1 << 18)
#define HCR_TID2 (1 << 17)
#define HCR_TID1 (1 << 16)
#define HCR_TID0 (1 << 15)
#define HCR_TWE (1 << 14)
#define HCR_TWI (1 << 13)
#define HCR_DC (1 << 12)
#define HCR_BSU (3 << 10)
#define HCR_BSU_IS (1 << 10)
#define HCR_FB (1 << 9)
#define HCR_VA (1 << 8)
#define HCR_VI (1 << 7)
#define HCR_VF (1 << 6)
#define HCR_AMO (1 << 5)
#define HCR_IMO (1 << 4)
#define HCR_FMO (1 << 3)
#define HCR_PTW (1 << 2)
#define HCR_SWIO (1 << 1)
#define HCR_VM 1
/*
* The bits we set in HCR:
* TAC: Trap ACTLR
* TSC: Trap SMC
* TSW: Trap cache operations by set/way
* TWI: Trap WFI
* TIDCP: Trap L2CTLR/L2ECTLR
* BSU_IS: Upgrade barriers to the inner shareable domain
* FB: Force broadcast of all maintainance operations
* AMO: Override CPSR.A and enable signaling with VA
* IMO: Override CPSR.I and enable signaling with VI
* FMO: Override CPSR.F and enable signaling with VF
* SWIO: Turn set/way invalidates into set/way clean+invalidate
*/
#define HCR_GUEST_MASK (HCR_TSC | HCR_TSW | HCR_TWI | HCR_VM | HCR_BSU_IS | \
HCR_FB | HCR_TAC | HCR_AMO | HCR_IMO | HCR_FMO | \
HCR_SWIO | HCR_TIDCP)
/* Hyp System Control Register (HSCTLR) bits */
#define HSCTLR_TE (1 << 30)
#define HSCTLR_EE (1 << 25)
#define HSCTLR_FI (1 << 21)
#define HSCTLR_WXN (1 << 19)
#define HSCTLR_I (1 << 12)
#define HSCTLR_C (1 << 2)
#define HSCTLR_A (1 << 1)
#define HSCTLR_M 1
#define HSCTLR_MASK (HSCTLR_M | HSCTLR_A | HSCTLR_C | HSCTLR_I | \
HSCTLR_WXN | HSCTLR_FI | HSCTLR_EE | HSCTLR_TE)
/* TTBCR and HTCR Registers bits */
#define TTBCR_EAE (1 << 31)
#define TTBCR_IMP (1 << 30)
#define TTBCR_SH1 (3 << 28)
#define TTBCR_ORGN1 (3 << 26)
#define TTBCR_IRGN1 (3 << 24)
#define TTBCR_EPD1 (1 << 23)
#define TTBCR_A1 (1 << 22)
#define TTBCR_T1SZ (3 << 16)
#define TTBCR_SH0 (3 << 12)
#define TTBCR_ORGN0 (3 << 10)
#define TTBCR_IRGN0 (3 << 8)
#define TTBCR_EPD0 (1 << 7)
#define TTBCR_T0SZ 3
#define HTCR_MASK (TTBCR_T0SZ | TTBCR_IRGN0 | TTBCR_ORGN0 | TTBCR_SH0)
/* Hyp Debug Configuration Register bits */
#define HDCR_TDRA (1 << 11)
#define HDCR_TDOSA (1 << 10)
#define HDCR_TDA (1 << 9)
#define HDCR_TDE (1 << 8)
#define HDCR_HPME (1 << 7)
#define HDCR_TPM (1 << 6)
#define HDCR_TPMCR (1 << 5)
#define HDCR_HPMN_MASK (0x1F)
/*
* The architecture supports 40-bit IPA as input to the 2nd stage translations
* and PTRS_PER_S2_PGD becomes 1024, because each entry covers 1GB of address
* space.
*/
#define KVM_PHYS_SHIFT (40)
#define KVM_PHYS_SIZE (1ULL << KVM_PHYS_SHIFT)
#define KVM_PHYS_MASK (KVM_PHYS_SIZE - 1ULL)
#define PTRS_PER_S2_PGD (1ULL << (KVM_PHYS_SHIFT - 30))
#define S2_PGD_ORDER get_order(PTRS_PER_S2_PGD * sizeof(pgd_t))
#define S2_PGD_SIZE (1 << S2_PGD_ORDER)
/* Virtualization Translation Control Register (VTCR) bits */
#define VTCR_SH0 (3 << 12)
#define VTCR_ORGN0 (3 << 10)
#define VTCR_IRGN0 (3 << 8)
#define VTCR_SL0 (3 << 6)
#define VTCR_S (1 << 4)
#define VTCR_T0SZ (0xf)
#define VTCR_MASK (VTCR_SH0 | VTCR_ORGN0 | VTCR_IRGN0 | VTCR_SL0 | \
VTCR_S | VTCR_T0SZ)
#define VTCR_HTCR_SH (VTCR_SH0 | VTCR_ORGN0 | VTCR_IRGN0)
#define VTCR_SL_L2 (0 << 6) /* Starting-level: 2 */
#define VTCR_SL_L1 (1 << 6) /* Starting-level: 1 */
#define KVM_VTCR_SL0 VTCR_SL_L1
/* stage-2 input address range defined as 2^(32-T0SZ) */
#define KVM_T0SZ (32 - KVM_PHYS_SHIFT)
#define KVM_VTCR_T0SZ (KVM_T0SZ & VTCR_T0SZ)
#define KVM_VTCR_S ((KVM_VTCR_T0SZ << 1) & VTCR_S)
/* Virtualization Translation Table Base Register (VTTBR) bits */
#if KVM_VTCR_SL0 == VTCR_SL_L2 /* see ARM DDI 0406C: B4-1720 */
#define VTTBR_X (14 - KVM_T0SZ)
#else
#define VTTBR_X (5 - KVM_T0SZ)
#endif
#endif /* __ARM_KVM_ARM_H__ */

View File

@ -54,5 +54,25 @@
#define ARM_EXCEPTION_DATA_ABORT 4
#define ARM_EXCEPTION_IRQ 5
#define ARM_EXCEPTION_FIQ 6
#define ARM_EXCEPTION_HVC 7
#ifndef __ASSEMBLY__
struct kvm_vcpu;
extern char __kvm_hyp_init[];
extern char __kvm_hyp_init_end[];
extern char __kvm_hyp_exit[];
extern char __kvm_hyp_exit_end[];
extern char __kvm_hyp_vector[];
extern char __kvm_hyp_code_start[];
extern char __kvm_hyp_code_end[];
extern void __kvm_flush_vm_context(void);
extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu);
#endif
#endif /* __ARM_KVM_ASM_H__ */

View File

@ -111,4 +111,5 @@ int kvm_arm_copy_reg_indices(struct kvm_vcpu *vcpu, u64 __user *indices);
struct kvm_one_reg;
int kvm_arm_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg);
int kvm_arm_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg);
u64 kvm_call_hyp(void *hypfn, ...);
#endif /* __ARM_KVM_HOST_H__ */

View File

@ -0,0 +1,29 @@
/*
* Copyright (C) 2012 - Virtual Open Systems and Columbia University
* Author: Christoffer Dall <c.dall@virtualopensystems.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#ifndef __ARM_KVM_MMU_H__
#define __ARM_KVM_MMU_H__
int create_hyp_mappings(void *from, void *to);
int create_hyp_io_mappings(void *from, void *to, phys_addr_t);
void free_hyp_pmds(void);
phys_addr_t kvm_mmu_get_httbr(void);
int kvm_mmu_init(void);
void kvm_clear_hyp_idmap(void);
#endif /* __ARM_KVM_MMU_H__ */

View File

@ -32,6 +32,9 @@
#define PMD_TYPE_SECT (_AT(pmdval_t, 1) << 0)
#define PMD_BIT4 (_AT(pmdval_t, 0))
#define PMD_DOMAIN(x) (_AT(pmdval_t, 0))
#define PMD_APTABLE_SHIFT (61)
#define PMD_APTABLE (_AT(pgdval_t, 3) << PGD_APTABLE_SHIFT)
#define PMD_PXNTABLE (_AT(pgdval_t, 1) << 59)
/*
* - section
@ -41,6 +44,7 @@
#define PMD_SECT_S (_AT(pmdval_t, 3) << 8)
#define PMD_SECT_AF (_AT(pmdval_t, 1) << 10)
#define PMD_SECT_nG (_AT(pmdval_t, 1) << 11)
#define PMD_SECT_PXN (_AT(pmdval_t, 1) << 53)
#define PMD_SECT_XN (_AT(pmdval_t, 1) << 54)
#define PMD_SECT_AP_WRITE (_AT(pmdval_t, 0))
#define PMD_SECT_AP_READ (_AT(pmdval_t, 0))

View File

@ -34,11 +34,21 @@
#include <asm/ptrace.h>
#include <asm/mman.h>
#include <asm/cputype.h>
#include <asm/tlbflush.h>
#include <asm/virt.h>
#include <asm/kvm_arm.h>
#include <asm/kvm_asm.h>
#include <asm/kvm_mmu.h>
#ifdef REQUIRES_VIRT
__asm__(".arch_extension virt");
#endif
static DEFINE_PER_CPU(unsigned long, kvm_arm_hyp_stack_page);
static struct vfp_hard_struct __percpu *kvm_host_vfp_state;
static unsigned long hyp_default_vectors;
int kvm_arch_hardware_enable(void *garbage)
{
return 0;
@ -331,9 +341,171 @@ long kvm_arch_vm_ioctl(struct file *filp,
return -EINVAL;
}
static void cpu_init_hyp_mode(void *vector)
{
unsigned long long pgd_ptr;
unsigned long pgd_low, pgd_high;
unsigned long hyp_stack_ptr;
unsigned long stack_page;
unsigned long vector_ptr;
/* Switch from the HYP stub to our own HYP init vector */
__hyp_set_vectors((unsigned long)vector);
pgd_ptr = (unsigned long long)kvm_mmu_get_httbr();
pgd_low = (pgd_ptr & ((1ULL << 32) - 1));
pgd_high = (pgd_ptr >> 32ULL);
stack_page = __get_cpu_var(kvm_arm_hyp_stack_page);
hyp_stack_ptr = stack_page + PAGE_SIZE;
vector_ptr = (unsigned long)__kvm_hyp_vector;
/*
* Call initialization code, and switch to the full blown
* HYP code. The init code doesn't need to preserve these registers as
* r1-r3 and r12 are already callee save according to the AAPCS.
* Note that we slightly misuse the prototype by casing the pgd_low to
* a void *.
*/
kvm_call_hyp((void *)pgd_low, pgd_high, hyp_stack_ptr, vector_ptr);
}
/**
* Inits Hyp-mode on all online CPUs
*/
static int init_hyp_mode(void)
{
phys_addr_t init_phys_addr;
int cpu;
int err = 0;
/*
* Allocate Hyp PGD and setup Hyp identity mapping
*/
err = kvm_mmu_init();
if (err)
goto out_err;
/*
* It is probably enough to obtain the default on one
* CPU. It's unlikely to be different on the others.
*/
hyp_default_vectors = __hyp_get_vectors();
/*
* Allocate stack pages for Hypervisor-mode
*/
for_each_possible_cpu(cpu) {
unsigned long stack_page;
stack_page = __get_free_page(GFP_KERNEL);
if (!stack_page) {
err = -ENOMEM;
goto out_free_stack_pages;
}
per_cpu(kvm_arm_hyp_stack_page, cpu) = stack_page;
}
/*
* Execute the init code on each CPU.
*
* Note: The stack is not mapped yet, so don't do anything else than
* initializing the hypervisor mode on each CPU using a local stack
* space for temporary storage.
*/
init_phys_addr = virt_to_phys(__kvm_hyp_init);
for_each_online_cpu(cpu) {
smp_call_function_single(cpu, cpu_init_hyp_mode,
(void *)(long)init_phys_addr, 1);
}
/*
* Unmap the identity mapping
*/
kvm_clear_hyp_idmap();
/*
* Map the Hyp-code called directly from the host
*/
err = create_hyp_mappings(__kvm_hyp_code_start, __kvm_hyp_code_end);
if (err) {
kvm_err("Cannot map world-switch code\n");
goto out_free_mappings;
}
/*
* Map the Hyp stack pages
*/
for_each_possible_cpu(cpu) {
char *stack_page = (char *)per_cpu(kvm_arm_hyp_stack_page, cpu);
err = create_hyp_mappings(stack_page, stack_page + PAGE_SIZE);
if (err) {
kvm_err("Cannot map hyp stack\n");
goto out_free_mappings;
}
}
/*
* Map the host VFP structures
*/
kvm_host_vfp_state = alloc_percpu(struct vfp_hard_struct);
if (!kvm_host_vfp_state) {
err = -ENOMEM;
kvm_err("Cannot allocate host VFP state\n");
goto out_free_mappings;
}
for_each_possible_cpu(cpu) {
struct vfp_hard_struct *vfp;
vfp = per_cpu_ptr(kvm_host_vfp_state, cpu);
err = create_hyp_mappings(vfp, vfp + 1);
if (err) {
kvm_err("Cannot map host VFP state: %d\n", err);
goto out_free_vfp;
}
}
kvm_info("Hyp mode initialized successfully\n");
return 0;
out_free_vfp:
free_percpu(kvm_host_vfp_state);
out_free_mappings:
free_hyp_pmds();
out_free_stack_pages:
for_each_possible_cpu(cpu)
free_page(per_cpu(kvm_arm_hyp_stack_page, cpu));
out_err:
kvm_err("error initializing Hyp mode: %d\n", err);
return err;
}
/**
* Initialize Hyp-mode and memory mappings on all CPUs.
*/
int kvm_arch_init(void *opaque)
{
int err;
if (!is_hyp_mode_available()) {
kvm_err("HYP mode not available\n");
return -ENODEV;
}
if (kvm_target_cpu() < 0) {
kvm_err("Target CPU not supported!\n");
return -ENODEV;
}
err = init_hyp_mode();
if (err)
goto out_err;
return 0;
out_err:
return err;
}
/* NOP: Compiling as a module not supported */

View File

@ -15,5 +15,100 @@
* along with this program; if not, write to the Free Software
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#include <linux/linkage.h>
#include <asm/unified.h>
#include <asm/asm-offsets.h>
#include <asm/kvm_asm.h>
#include <asm/kvm_arm.h>
/********************************************************************
* Hypervisor initialization
* - should be called with:
* r0,r1 = Hypervisor pgd pointer
* r2 = top of Hyp stack (kernel VA)
* r3 = pointer to hyp vectors
*/
.text
.pushsection .hyp.idmap.text,"ax"
.align 5
__kvm_hyp_init:
.globl __kvm_hyp_init
@ Hyp-mode exception vector
W(b) .
W(b) .
W(b) .
W(b) .
W(b) .
W(b) __do_hyp_init
W(b) .
W(b) .
__do_hyp_init:
@ Set the HTTBR to point to the hypervisor PGD pointer passed
mcrr p15, 4, r0, r1, c2
@ Set the HTCR and VTCR to the same shareability and cacheability
@ settings as the non-secure TTBCR and with T0SZ == 0.
mrc p15, 4, r0, c2, c0, 2 @ HTCR
ldr r12, =HTCR_MASK
bic r0, r0, r12
mrc p15, 0, r1, c2, c0, 2 @ TTBCR
and r1, r1, #(HTCR_MASK & ~TTBCR_T0SZ)
orr r0, r0, r1
mcr p15, 4, r0, c2, c0, 2 @ HTCR
mrc p15, 4, r1, c2, c1, 2 @ VTCR
ldr r12, =VTCR_MASK
bic r1, r1, r12
bic r0, r0, #(~VTCR_HTCR_SH) @ clear non-reusable HTCR bits
orr r1, r0, r1
orr r1, r1, #(KVM_VTCR_SL0 | KVM_VTCR_T0SZ | KVM_VTCR_S)
mcr p15, 4, r1, c2, c1, 2 @ VTCR
@ Use the same memory attributes for hyp. accesses as the kernel
@ (copy MAIRx ro HMAIRx).
mrc p15, 0, r0, c10, c2, 0
mcr p15, 4, r0, c10, c2, 0
mrc p15, 0, r0, c10, c2, 1
mcr p15, 4, r0, c10, c2, 1
@ Set the HSCTLR to:
@ - ARM/THUMB exceptions: Kernel config (Thumb-2 kernel)
@ - Endianness: Kernel config
@ - Fast Interrupt Features: Kernel config
@ - Write permission implies XN: disabled
@ - Instruction cache: enabled
@ - Data/Unified cache: enabled
@ - Memory alignment checks: enabled
@ - MMU: enabled (this code must be run from an identity mapping)
mrc p15, 4, r0, c1, c0, 0 @ HSCR
ldr r12, =HSCTLR_MASK
bic r0, r0, r12
mrc p15, 0, r1, c1, c0, 0 @ SCTLR
ldr r12, =(HSCTLR_EE | HSCTLR_FI | HSCTLR_I | HSCTLR_C)
and r1, r1, r12
ARM( ldr r12, =(HSCTLR_M | HSCTLR_A) )
THUMB( ldr r12, =(HSCTLR_M | HSCTLR_A | HSCTLR_TE) )
orr r1, r1, r12
orr r0, r0, r1
isb
mcr p15, 4, r0, c1, c0, 0 @ HSCR
isb
@ Set stack pointer and return to the kernel
mov sp, r2
@ Set HVBAR to point to the HYP vectors
mcr p15, 4, r3, c12, c0, 0 @ HVBAR
eret
.ltorg
.globl __kvm_hyp_init_end
__kvm_hyp_init_end:
.popsection

View File

@ -15,5 +15,67 @@
* along with this program; if not, write to the Free Software
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#include <linux/linkage.h>
#include <linux/const.h>
#include <asm/unified.h>
#include <asm/page.h>
#include <asm/asm-offsets.h>
#include <asm/kvm_asm.h>
#include <asm/kvm_arm.h>
.text
__kvm_hyp_code_start:
.globl __kvm_hyp_code_start
/********************************************************************
* Flush per-VMID TLBs
*/
ENTRY(__kvm_flush_vm_context)
bx lr
ENDPROC(__kvm_flush_vm_context)
/********************************************************************
* Hypervisor world-switch code
*/
ENTRY(__kvm_vcpu_run)
bx lr
/********************************************************************
* Call function in Hyp mode
*
*
* u64 kvm_call_hyp(void *hypfn, ...);
*
* This is not really a variadic function in the classic C-way and care must
* be taken when calling this to ensure parameters are passed in registers
* only, since the stack will change between the caller and the callee.
*
* Call the function with the first argument containing a pointer to the
* function you wish to call in Hyp mode, and subsequent arguments will be
* passed as r0, r1, and r2 (a maximum of 3 arguments in addition to the
* function pointer can be passed). The function being called must be mapped
* in Hyp mode (see init_hyp_mode in arch/arm/kvm/arm.c). Return values are
* passed in r0 and r1.
*
* The calling convention follows the standard AAPCS:
* r0 - r3: caller save
* r12: caller save
* rest: callee save
*/
ENTRY(kvm_call_hyp)
hvc #0
bx lr
/********************************************************************
* Hypervisor exception vector and handlers
*/
.align 5
__kvm_hyp_vector:
.globl __kvm_hyp_vector
nop
__kvm_hyp_code_end:
.globl __kvm_hyp_code_end

View File

@ -15,3 +15,251 @@
* along with this program; if not, write to the Free Software
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*/
#include <linux/mman.h>
#include <linux/kvm_host.h>
#include <linux/io.h>
#include <asm/idmap.h>
#include <asm/pgalloc.h>
#include <asm/kvm_arm.h>
#include <asm/kvm_mmu.h>
#include <asm/mach/map.h>
extern char __hyp_idmap_text_start[], __hyp_idmap_text_end[];
static DEFINE_MUTEX(kvm_hyp_pgd_mutex);
static void kvm_set_pte(pte_t *pte, pte_t new_pte)
{
pte_val(*pte) = new_pte;
/*
* flush_pmd_entry just takes a void pointer and cleans the necessary
* cache entries, so we can reuse the function for ptes.
*/
flush_pmd_entry(pte);
}
static void free_ptes(pmd_t *pmd, unsigned long addr)
{
pte_t *pte;
unsigned int i;
for (i = 0; i < PTRS_PER_PMD; i++, addr += PMD_SIZE) {
if (!pmd_none(*pmd) && pmd_table(*pmd)) {
pte = pte_offset_kernel(pmd, addr);
pte_free_kernel(NULL, pte);
}
pmd++;
}
}
/**
* free_hyp_pmds - free a Hyp-mode level-2 tables and child level-3 tables
*
* Assumes this is a page table used strictly in Hyp-mode and therefore contains
* only mappings in the kernel memory area, which is above PAGE_OFFSET.
*/
void free_hyp_pmds(void)
{
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
unsigned long addr;
mutex_lock(&kvm_hyp_pgd_mutex);
for (addr = PAGE_OFFSET; addr != 0; addr += PGDIR_SIZE) {
pgd = hyp_pgd + pgd_index(addr);
pud = pud_offset(pgd, addr);
if (pud_none(*pud))
continue;
BUG_ON(pud_bad(*pud));
pmd = pmd_offset(pud, addr);
free_ptes(pmd, addr);
pmd_free(NULL, pmd);
pud_clear(pud);
}
mutex_unlock(&kvm_hyp_pgd_mutex);
}
static void create_hyp_pte_mappings(pmd_t *pmd, unsigned long start,
unsigned long end)
{
pte_t *pte;
unsigned long addr;
struct page *page;
for (addr = start & PAGE_MASK; addr < end; addr += PAGE_SIZE) {
pte = pte_offset_kernel(pmd, addr);
BUG_ON(!virt_addr_valid(addr));
page = virt_to_page(addr);
kvm_set_pte(pte, mk_pte(page, PAGE_HYP));
}
}
static void create_hyp_io_pte_mappings(pmd_t *pmd, unsigned long start,
unsigned long end,
unsigned long *pfn_base)
{
pte_t *pte;
unsigned long addr;
for (addr = start & PAGE_MASK; addr < end; addr += PAGE_SIZE) {
pte = pte_offset_kernel(pmd, addr);
BUG_ON(pfn_valid(*pfn_base));
kvm_set_pte(pte, pfn_pte(*pfn_base, PAGE_HYP_DEVICE));
(*pfn_base)++;
}
}
static int create_hyp_pmd_mappings(pud_t *pud, unsigned long start,
unsigned long end, unsigned long *pfn_base)
{
pmd_t *pmd;
pte_t *pte;
unsigned long addr, next;
for (addr = start; addr < end; addr = next) {
pmd = pmd_offset(pud, addr);
BUG_ON(pmd_sect(*pmd));
if (pmd_none(*pmd)) {
pte = pte_alloc_one_kernel(NULL, addr);
if (!pte) {
kvm_err("Cannot allocate Hyp pte\n");
return -ENOMEM;
}
pmd_populate_kernel(NULL, pmd, pte);
}
next = pmd_addr_end(addr, end);
/*
* If pfn_base is NULL, we map kernel pages into HYP with the
* virtual address. Otherwise, this is considered an I/O
* mapping and we map the physical region starting at
* *pfn_base to [start, end[.
*/
if (!pfn_base)
create_hyp_pte_mappings(pmd, addr, next);
else
create_hyp_io_pte_mappings(pmd, addr, next, pfn_base);
}
return 0;
}
static int __create_hyp_mappings(void *from, void *to, unsigned long *pfn_base)
{
unsigned long start = (unsigned long)from;
unsigned long end = (unsigned long)to;
pgd_t *pgd;
pud_t *pud;
pmd_t *pmd;
unsigned long addr, next;
int err = 0;
BUG_ON(start > end);
if (start < PAGE_OFFSET)
return -EINVAL;
mutex_lock(&kvm_hyp_pgd_mutex);
for (addr = start; addr < end; addr = next) {
pgd = hyp_pgd + pgd_index(addr);
pud = pud_offset(pgd, addr);
if (pud_none_or_clear_bad(pud)) {
pmd = pmd_alloc_one(NULL, addr);
if (!pmd) {
kvm_err("Cannot allocate Hyp pmd\n");
err = -ENOMEM;
goto out;
}
pud_populate(NULL, pud, pmd);
}
next = pgd_addr_end(addr, end);
err = create_hyp_pmd_mappings(pud, addr, next, pfn_base);
if (err)
goto out;
}
out:
mutex_unlock(&kvm_hyp_pgd_mutex);
return err;
}
/**
* create_hyp_mappings - map a kernel virtual address range in Hyp mode
* @from: The virtual kernel start address of the range
* @to: The virtual kernel end address of the range (exclusive)
*
* The same virtual address as the kernel virtual address is also used in
* Hyp-mode mapping to the same underlying physical pages.
*
* Note: Wrapping around zero in the "to" address is not supported.
*/
int create_hyp_mappings(void *from, void *to)
{
return __create_hyp_mappings(from, to, NULL);
}
/**
* create_hyp_io_mappings - map a physical IO range in Hyp mode
* @from: The virtual HYP start address of the range
* @to: The virtual HYP end address of the range (exclusive)
* @addr: The physical start address which gets mapped
*/
int create_hyp_io_mappings(void *from, void *to, phys_addr_t addr)
{
unsigned long pfn = __phys_to_pfn(addr);
return __create_hyp_mappings(from, to, &pfn);
}
int kvm_handle_guest_abort(struct kvm_vcpu *vcpu, struct kvm_run *run)
{
return -EINVAL;
}
phys_addr_t kvm_mmu_get_httbr(void)
{
VM_BUG_ON(!virt_addr_valid(hyp_pgd));
return virt_to_phys(hyp_pgd);
}
int kvm_mmu_init(void)
{
return hyp_pgd ? 0 : -ENOMEM;
}
/**
* kvm_clear_idmap - remove all idmaps from the hyp pgd
*
* Free the underlying pmds for all pgds in range and clear the pgds (but
* don't free them) afterwards.
*/
void kvm_clear_hyp_idmap(void)
{
unsigned long addr, end;
unsigned long next;
pgd_t *pgd = hyp_pgd;
pud_t *pud;
pmd_t *pmd;
addr = virt_to_phys(__hyp_idmap_text_start);
end = virt_to_phys(__hyp_idmap_text_end);
pgd += pgd_index(addr);
do {
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(pgd))
continue;
pud = pud_offset(pgd, addr);
pmd = pmd_offset(pud, addr);
pud_clear(pud);
clean_pmd_entry(pmd);
pmd_free(NULL, (pmd_t *)((unsigned long)pmd & PAGE_MASK));
} while (pgd++, addr = next, addr < end);
}