From 342afce10d6f61c443c95e244f812d4766f73f53 Mon Sep 17 00:00:00 2001 From: DENG Qingfang Date: Sat, 16 Oct 2021 14:24:14 +0800 Subject: [PATCH] net: dsa: mt7530: correct ds->num_ports Setting ds->num_ports to DSA_MAX_PORTS made DSA core allocate unnecessary dsa_port's and call mt7530_port_disable for non-existent ports. Set it to MT7530_NUM_PORTS to fix that, and dsa_is_user_port check in port_enable/disable is no longer required. Cc: stable@vger.kernel.org Signed-off-by: DENG Qingfang Signed-off-by: David S. Miller --- drivers/net/dsa/mt7530.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 094737e5084a..9890672a206d 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -1035,9 +1035,6 @@ mt7530_port_enable(struct dsa_switch *ds, int port, { struct mt7530_priv *priv = ds->priv; - if (!dsa_is_user_port(ds, port)) - return 0; - mutex_lock(&priv->reg_mutex); /* Allow the user port gets connected to the cpu port and also @@ -1060,9 +1057,6 @@ mt7530_port_disable(struct dsa_switch *ds, int port) { struct mt7530_priv *priv = ds->priv; - if (!dsa_is_user_port(ds, port)) - return; - mutex_lock(&priv->reg_mutex); /* Clear up all port matrix which could be restored in the next @@ -3211,7 +3205,7 @@ mt7530_probe(struct mdio_device *mdiodev) return -ENOMEM; priv->ds->dev = &mdiodev->dev; - priv->ds->num_ports = DSA_MAX_PORTS; + priv->ds->num_ports = MT7530_NUM_PORTS; /* Use medatek,mcm property to distinguish hardware type that would * casues a little bit differences on power-on sequence.