MIPS: BMIPS: Improve BCM6368 device tree

- Remove unneeded leds0 alias.
- Switch to bcm6345-l1-intc interrupt controller.
- Use interrupt-controller instead of periph_intc and cpu_intc.
- Add uart1 node.
- Single ohci and ehci nodes.
- Avoid using underscores in node names.
- Rename uart aliases to serial.
- Remove blank line in cpus node.

[ralf@linux-mips.org: fix references in bcm96368mvwg.dts so the file keeps
building.]

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jogo@openwrt.org
Cc: cernekee@gmail.com
Cc: robh@kernel.org
Cc: simon@fire.lp0.eu
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Álvaro Fernández Rojas 2016-04-09 12:57:49 +02:00 committed by Ralf Baechle
parent e3b992d028
commit 2d52ee82b4
2 changed files with 22 additions and 14 deletions

View File

@ -20,11 +20,10 @@
device_type = "cpu";
reg = <1>;
};
};
clocks {
periph_clk: periph_clk {
periph_clk: periph-clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
@ -32,11 +31,11 @@
};
aliases {
leds0 = &leds0;
uart0 = &uart0;
serial0 = &uart0;
serial1 = &uart1;
};
cpu_intc: cpu_intc {
cpu_intc: interrupt-controller {
#address-cells = <0>;
compatible = "mti,cpu-interrupt-controller";
@ -64,16 +63,16 @@
mask = <0x1>;
};
periph_intc: periph_intc@10000020 {
compatible = "brcm,bcm3380-l2-intc";
reg = <0x10000024 0x4 0x1000002c 0x4>,
<0x10000020 0x4 0x10000028 0x4>;
periph_intc: interrupt-controller@10000020 {
compatible = "brcm,bcm6345-l1-intc";
reg = <0x10000020 0x10>,
<0x10000030 0x10>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&cpu_intc>;
interrupts = <2>;
interrupts = <2>, <3>;
};
leds0: led-controller@100000d0 {
@ -93,7 +92,16 @@
status = "disabled";
};
ehci0: usb@10001500 {
uart1: serial@10000120 {
compatible = "brcm,bcm6345-uart";
reg = <0x10000120 0x18>;
interrupt-parent = <&periph_intc>;
interrupts = <3>;
clocks = <&periph_clk>;
status = "disabled";
};
ehci: usb@10001500 {
compatible = "brcm,bcm6368-ehci", "generic-ehci";
reg = <0x10001500 0x100>;
big-endian;
@ -102,7 +110,7 @@
status = "disabled";
};
ohci0: usb@10001600 {
ohci: usb@10001600 {
compatible = "brcm,bcm6368-ohci", "generic-ohci";
reg = <0x10001600 0x100>;
big-endian;

View File

@ -22,10 +22,10 @@
};
/* FIXME: need to set up USB_CTRL registers first */
&ehci0 {
&ehci {
status = "disabled";
};
&ohci0 {
&ohci {
status = "disabled";
};