Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (25 commits)
  [MIPS] Jazz: disable PIT; cleanup R4030 clockevent
  [MIPS] Bigsur supports highmem.
  [MIPS] mtx-1: Enable -Werror.
  [MIPS] mtx-1: Remove unused mtx1_sys_btn.
  [MIPS] Pb1200: Enable -Werror.
  [MIPS] Fix and cleanup the MIPS part of the (ab)use of CLOCK_TICK_RATE.
  [MIPS] SNI: register a02r clockevent; don't use PIT timer
  [MIPS] i8253.h: Remove all i8259 related definitions.
  [MIPS] i8253: Cleanup.
  [MIPS] Cobalt: Fix IRQ comment; the Cobalt kernel uses CP0 counter now.
  [MIPS] Pb1200: Fix warning.
  [MIPS] Pb1200: Fix warning.
  [MIPS] IP27: Fix build error.
  [MIPS] Excite: Fix build error.
  [MIPS] Sibyte: Split and move clock code.
  [MIPS] Sibyte: Fixes for oneshot timer mode.
  [MIPS] Sibyte: Remove blank line.
  [MIPS] Swarm: Fix build failure
  [MIPS] time: Code cleanups
  [MIPS] time: Remove now unused local_timer_interrupt.
  ...
This commit is contained in:
Linus Torvalds 2007-11-02 19:37:26 -07:00
commit 29dd5a7733
33 changed files with 574 additions and 644 deletions

View File

@ -546,6 +546,7 @@ config SIBYTE_BIGSUR
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select SYS_SUPPORTS_LITTLE_ENDIAN
config SNI_RM
@ -733,15 +734,27 @@ config ARCH_MAY_HAVE_PC_FDC
config BOOT_RAW
bool
config CEVT_BCM1480
bool
config CEVT_GT641XX
bool
config CEVT_R4K
bool
config CEVT_SB1250
bool
config CEVT_TXX9
bool
config CSRC_BCM1480
bool
config CSRC_SB1250
bool
config CFE
bool

View File

@ -9,3 +9,5 @@
lib-y := init.o board_setup.o irqmap.o
obj-y := platform.o
EXTRA_CFLAGS += -Werror

View File

@ -34,15 +34,6 @@ static struct resource mtx1_wdt_res[] = {
}
};
static struct resource mtx1_sys_btn[] = {
[0] = {
.start = 7,
.end = 7,
.name = "mtx1-sys-btn-gpio",
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device mtx1_wdt = {
.name = "mtx1-wdt",
.id = 0,

View File

@ -3,3 +3,5 @@
#
lib-y := init.o board_setup.o irqmap.o
EXTRA_CFLAGS += -Werror

View File

@ -68,9 +68,11 @@ void board_reset(void)
void __init board_setup(void)
{
char *argptr = NULL;
u32 pin_func;
#if 0
{
u32 pin_func;
/* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
* but it is board specific code, so put it here.
*/
@ -81,11 +83,13 @@ void __init board_setup(void)
au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
au_sync();
}
#endif
#if defined(CONFIG_I2C_AU1550)
{
u32 freq0, clksrc;
u32 pin_func;
/* Select SMBUS in CPLD */
bcsr->resets &= ~(BCSR_RESETS_PCS0MUX);

View File

@ -94,51 +94,41 @@ inline void pb1200_disable_irq(unsigned int irq_nr)
bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN);
}
static unsigned int pb1200_startup_irq( unsigned int irq_nr )
static unsigned int pb1200_setup_cascade(void)
{
if (++pb1200_cascade_en == 1)
{
request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
0, "Pb1200 Cascade", (void *)&pb1200_cascade_handler );
#ifdef CONFIG_MIPS_PB1200
/* We have a problem with CPLD rev3. Enable a workaround */
if( ((bcsr->whoami & BCSR_WHOAMI_CPLD)>>4) <= 3)
{
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n");
printk("updated to latest revision. This software will not\n");
printk("work on anything less than CPLD rev4\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
while(1);
}
#endif
}
pb1200_enable_irq(irq_nr);
int err;
err = request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
0, "Pb1200 Cascade", &pb1200_cascade_handler);
if (err)
return err;
return 0;
}
static void pb1200_shutdown_irq( unsigned int irq_nr )
static unsigned int pb1200_startup_irq(unsigned int irq)
{
pb1200_disable_irq(irq_nr);
if (--pb1200_cascade_en == 0)
{
free_irq(AU1000_GPIO_7, &pb1200_cascade_handler );
if (++pb1200_cascade_en == 1) {
int res;
res = pb1200_setup_cascade();
if (res)
return res;
}
return;
pb1200_enable_irq(irq);
return 0;
}
static struct irq_chip external_irq_type =
static void pb1200_shutdown_irq(unsigned int irq)
{
pb1200_disable_irq(irq);
if (--pb1200_cascade_en == 0)
free_irq(AU1000_GPIO_7, &pb1200_cascade_handler);
}
static struct irq_chip external_irq_type = {
#ifdef CONFIG_MIPS_PB1200
.name = "Pb1200 Ext",
#endif
@ -155,16 +145,38 @@ static struct irq_chip external_irq_type =
void _board_init_irq(void)
{
int irq_nr;
unsigned int irq;
for (irq_nr = PB1200_INT_BEGIN; irq_nr <= PB1200_INT_END; irq_nr++)
{
set_irq_chip_and_handler(irq_nr, &external_irq_type,
#ifdef CONFIG_MIPS_PB1200
/* We have a problem with CPLD rev3. Enable a workaround */
if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) {
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n");
printk("updated to latest revision. This software will not\n");
printk("work on anything less than CPLD rev4\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
printk("\nWARNING!!!\n");
panic("Game over. Your score is 0.");
}
#endif
for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++) {
set_irq_chip_and_handler(irq, &external_irq_type,
handle_level_irq);
pb1200_disable_irq(irq_nr);
pb1200_disable_irq(irq);
}
/* GPIO_7 can not be hooked here, so it is hooked upon first
request of any source attached to the cascade */
/*
* GPIO_7 can not be hooked here, so it is hooked upon first
* request of any source attached to the cascade
*/
}

View File

@ -77,7 +77,7 @@ int titan_irqflags;
void __init plat_time_init(void)
{
const u32 modebit5 = ocd_readl(0x00e4);
unsigned int mult = ((modebit5 >> 11) & 0x1f) + 2,
unsigned int mult = ((modebit5 >> 11) & 0x1f) + 2;
unsigned int div = ((modebit5 >> 16) & 0x1f) + 2;
if (div == 33)

View File

@ -97,9 +97,10 @@ asmlinkage void plat_irq_dispatch(void)
if (pending & IE_IRQ4) {
r4030_read_reg32(JAZZ_TIMER_REGISTER);
do_IRQ(JAZZ_TIMER_IRQ);
} else if (pending & IE_IRQ2)
do_IRQ(r4030_read_reg32(JAZZ_EISA_IRQ_ACK));
else if (pending & IE_IRQ1) {
} else if (pending & IE_IRQ2) {
irq = *(volatile u8 *)JAZZ_EISA_IRQ_ACK;
do_IRQ(irq);
} else if (pending & IE_IRQ1) {
irq = *(volatile u8 *)JAZZ_IO_IRQ_SOURCE >> 2;
if (likely(irq > 0))
do_IRQ(irq + JAZZ_IRQ_START - 1);
@ -117,16 +118,16 @@ static void r4030_set_mode(enum clock_event_mode mode,
struct clock_event_device r4030_clockevent = {
.name = "r4030",
.features = CLOCK_EVT_FEAT_PERIODIC,
.rating = 100,
.rating = 300,
.irq = JAZZ_TIMER_IRQ,
.cpumask = CPU_MASK_CPU0,
.set_mode = r4030_set_mode,
};
static irqreturn_t r4030_timer_interrupt(int irq, void *dev_id)
{
r4030_clockevent.event_handler(&r4030_clockevent);
struct clock_event_device *cd = dev_id;
cd->event_handler(cd);
return IRQ_HANDLED;
}
@ -134,15 +135,22 @@ static struct irqaction r4030_timer_irqaction = {
.handler = r4030_timer_interrupt,
.flags = IRQF_DISABLED,
.mask = CPU_MASK_CPU0,
.name = "timer",
.name = "R4030 timer",
};
void __init plat_time_init(void)
{
struct irqaction *irq = &r4030_timer_irqaction;
struct clock_event_device *cd = &r4030_clockevent;
struct irqaction *action = &r4030_timer_irqaction;
unsigned int cpu = smp_processor_id();
BUG_ON(HZ != 100);
cd->cpumask = cpumask_of_cpu(cpu);
clockevents_register_device(cd);
action->dev_id = cd;
setup_irq(JAZZ_TIMER_IRQ, action);
/*
* Set clock to 100Hz.
*
@ -150,8 +158,5 @@ void __init plat_time_init(void)
* a programmable 4-bit divider. This makes it fairly inflexible.
*/
r4030_write_reg32(JAZZ_TIMER_INTERVAL, 9);
setup_irq(JAZZ_TIMER_IRQ, irq);
clockevents_register_device(&r4030_clockevent);
setup_pit_timer();
}

View File

@ -8,9 +8,13 @@ obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \
ptrace.o reset.o semaphore.o setup.o signal.o syscall.o \
time.o topology.o traps.o unaligned.o
obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o
obj-$(CONFIG_CEVT_R4K) += cevt-r4k.o
obj-$(CONFIG_CEVT_GT641XX) += cevt-gt641xx.o
obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o
obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o
obj-$(CONFIG_CSRC_BCM1480) += csrc-bcm1480.o
obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o
binfmt_irix-objs := irixelf.o irixinv.o irixioctl.o irixsig.o \
irix5sys.o sysirix.o

View File

@ -0,0 +1,149 @@
/*
* Copyright (C) 2000,2001,2004 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/percpu.h>
#include <asm/addrspace.h>
#include <asm/io.h>
#include <asm/time.h>
#include <asm/sibyte/bcm1480_regs.h>
#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/bcm1480_int.h>
#include <asm/sibyte/bcm1480_scd.h>
#include <asm/sibyte/sb1250.h>
#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0
#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
/*
* The general purpose timer ticks at 1MHz independent if
* the rest of the system
*/
static void sibyte_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
unsigned int cpu = smp_processor_id();
void __iomem *cfg, *init;
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
__raw_writeq(0, cfg);
__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
cfg);
break;
case CLOCK_EVT_MODE_ONESHOT:
/* Stop the timer until we actually program a shot */
case CLOCK_EVT_MODE_SHUTDOWN:
__raw_writeq(0, cfg);
break;
case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
case CLOCK_EVT_MODE_RESUME:
;
}
}
static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
{
unsigned int cpu = smp_processor_id();
void __iomem *cfg, *init;
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
__raw_writeq(delta - 1, init);
__raw_writeq(M_SCD_TIMER_ENABLE, cfg);
return 0;
}
static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
{
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd = dev_id;
void __iomem *cfg;
unsigned long tmode;
if (cd->mode == CLOCK_EVT_MODE_PERIODIC)
tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS;
else
tmode = 0;
/* ACK interrupt */
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
____raw_writeq(tmode, cfg);
cd->event_handler(cd);
return IRQ_HANDLED;
}
static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
void __cpuinit sb1480_clockevent_init(void)
{
unsigned int cpu = smp_processor_id();
unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu;
struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
BUG_ON(cpu > 3); /* Only have 4 general purpose timers */
sprintf(name, "bcm1480-counter-%d", cpu);
cd->name = name;
cd->features = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_ONESHOT;
clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd);
cd->min_delta_ns = clockevent_delta2ns(1, cd);
cd->rating = 200;
cd->irq = irq;
cd->cpumask = cpumask_of_cpu(cpu);
cd->set_next_event = sibyte_next_event;
cd->set_mode = sibyte_set_mode;
clockevents_register_device(cd);
bcm1480_mask_irq(cpu, irq);
/*
* Map the timer interrupt to IP[4] of this cpu
*/
__raw_writeq(IMR_IP4_VAL,
IOADDR(A_BCM1480_IMR_REGISTER(cpu,
R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (irq << 3)));
bcm1480_unmask_irq(cpu, irq);
action->handler = sibyte_counter_handler;
action->flags = IRQF_DISABLED | IRQF_PERCPU;
action->name = name;
action->dev_id = cd;
setup_irq(irq, action);
}

View File

@ -0,0 +1,148 @@
/*
* Copyright (C) 2000, 2001 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/percpu.h>
#include <asm/addrspace.h>
#include <asm/io.h>
#include <asm/time.h>
#include <asm/sibyte/sb1250.h>
#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/sb1250_int.h>
#include <asm/sibyte/sb1250_scd.h>
#define IMR_IP2_VAL K_INT_MAP_I0
#define IMR_IP3_VAL K_INT_MAP_I1
#define IMR_IP4_VAL K_INT_MAP_I2
/*
* The general purpose timer ticks at 1MHz independent if
* the rest of the system
*/
static void sibyte_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
unsigned int cpu = smp_processor_id();
void __iomem *cfg, *init;
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
__raw_writeq(0, cfg);
__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
cfg);
break;
case CLOCK_EVT_MODE_ONESHOT:
/* Stop the timer until we actually program a shot */
case CLOCK_EVT_MODE_SHUTDOWN:
__raw_writeq(0, cfg);
break;
case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
case CLOCK_EVT_MODE_RESUME:
;
}
}
static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
{
unsigned int cpu = smp_processor_id();
void __iomem *cfg, *init;
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
__raw_writeq(delta - 1, init);
__raw_writeq(M_SCD_TIMER_ENABLE, cfg);
return 0;
}
static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
{
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd = dev_id;
void __iomem *cfg;
unsigned long tmode;
if (cd->mode == CLOCK_EVT_MODE_PERIODIC)
tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS;
else
tmode = 0;
/* ACK interrupt */
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
____raw_writeq(tmode, cfg);
cd->event_handler(cd);
return IRQ_HANDLED;
}
static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
void __cpuinit sb1250_clockevent_init(void)
{
unsigned int cpu = smp_processor_id();
unsigned int irq = K_INT_TIMER_0 + cpu;
struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
/* Only have 4 general purpose timers, and we use last one as hpt */
BUG_ON(cpu > 2);
sprintf(name, "sb1250-counter-%d", cpu);
cd->name = name;
cd->features = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_ONESHOT;
clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd);
cd->min_delta_ns = clockevent_delta2ns(1, cd);
cd->rating = 200;
cd->irq = irq;
cd->cpumask = cpumask_of_cpu(cpu);
cd->set_next_event = sibyte_next_event;
cd->set_mode = sibyte_set_mode;
clockevents_register_device(cd);
sb1250_mask_irq(cpu, irq);
/*
* Map the timer interrupt to IP[4] of this cpu
*/
__raw_writeq(IMR_IP4_VAL,
IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
(irq << 3)));
sb1250_unmask_irq(cpu, irq);
action->handler = sibyte_counter_handler;
action->flags = IRQF_DISABLED | IRQF_PERCPU;
action->name = name;
action->dev_id = cd;
setup_irq(irq, action);
}

View File

@ -0,0 +1,54 @@
/*
* Copyright (C) 2000,2001,2004 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/clocksource.h>
#include <asm/addrspace.h>
#include <asm/io.h>
#include <asm/time.h>
#include <asm/sibyte/bcm1480_regs.h>
#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/bcm1480_int.h>
#include <asm/sibyte/bcm1480_scd.h>
#include <asm/sibyte/sb1250.h>
static cycle_t bcm1480_hpt_read(void)
{
return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT));
}
struct clocksource bcm1480_clocksource = {
.name = "zbbus-cycles",
.rating = 200,
.read = bcm1480_hpt_read,
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
void __init sb1480_clocksource_init(void)
{
struct clocksource *cs = &bcm1480_clocksource;
unsigned int plldiv;
unsigned long zbbus;
plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000);
clocksource_set_clock(cs, zbbus);
clocksource_register(cs);
}

View File

@ -0,0 +1,70 @@
/*
* Copyright (C) 2000, 2001 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/clocksource.h>
#include <asm/addrspace.h>
#include <asm/io.h>
#include <asm/time.h>
#include <asm/sibyte/sb1250.h>
#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/sb1250_int.h>
#include <asm/sibyte/sb1250_scd.h>
#define SB1250_HPT_NUM 3
#define SB1250_HPT_VALUE M_SCD_TIMER_CNT /* max value */
/*
* The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
* again.
*/
static cycle_t sb1250_hpt_read(void)
{
unsigned int count;
count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT))));
return SB1250_HPT_VALUE - count;
}
struct clocksource bcm1250_clocksource = {
.name = "MIPS",
.rating = 200,
.read = sb1250_hpt_read,
.mask = CLOCKSOURCE_MASK(23),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
void __init sb1250_clocksource_init(void)
{
struct clocksource *cs = &bcm1250_clocksource;
/* Setup hpt using timer #3 but do not enable irq for it */
__raw_writeq(0,
IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
R_SCD_TIMER_CFG)));
__raw_writeq(SB1250_HPT_VALUE,
IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
R_SCD_TIMER_INIT)));
__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
R_SCD_TIMER_CFG)));
clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
clocksource_register(cs);
}

View File

@ -12,6 +12,7 @@
#include <asm/delay.h>
#include <asm/i8253.h>
#include <asm/io.h>
#include <asm/time.h>
static DEFINE_SPINLOCK(i8253_lock);
@ -87,11 +88,10 @@ struct clock_event_device pit_clockevent = {
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = init_pit_timer,
.set_next_event = pit_next_event,
.shift = 32,
.irq = 0,
};
irqreturn_t timer_interrupt(int irq, void *dev_id)
static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
pit_clockevent.event_handler(&pit_clockevent);
@ -111,19 +111,20 @@ static struct irqaction irq0 = {
*/
void __init setup_pit_timer(void)
{
struct clock_event_device *cd = &pit_clockevent;
unsigned int cpu = smp_processor_id();
/*
* Start pit with the boot cpu mask and make it global after the
* IO_APIC has been initialized.
*/
pit_clockevent.cpumask = cpumask_of_cpu(0);
pit_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, 32);
pit_clockevent.max_delta_ns =
clockevent_delta2ns(0x7FFF, &pit_clockevent);
pit_clockevent.min_delta_ns =
clockevent_delta2ns(0xF, &pit_clockevent);
clockevents_register_device(&pit_clockevent);
cd->cpumask = cpumask_of_cpu(cpu);
clockevent_set_clock(cd, CLOCK_TICK_RATE);
cd->max_delta_ns = clockevent_delta2ns(0x7FFF, cd);
cd->min_delta_ns = clockevent_delta2ns(0xF, cd);
clockevents_register_device(cd);
irq0.mask = cpumask_of_cpu(0);
irq0.mask = cpumask_of_cpu(cpu);
setup_irq(0, &irq0);
}

View File

@ -3,8 +3,7 @@
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
* Copyright (c) 2003, 2004 Maciej W. Rozycki
*
* Common time service routines for MIPS machines. See
* Documentation/mips/time.README.
* Common time service routines for MIPS machines.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@ -18,28 +17,17 @@
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/param.h>
#include <linux/profile.h>
#include <linux/time.h>
#include <linux/timex.h>
#include <linux/smp.h>
#include <linux/kernel_stat.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/kallsyms.h>
#include <asm/bootinfo.h>
#include <asm/cache.h>
#include <asm/compiler.h>
#include <asm/cpu.h>
#include <asm/cpu-features.h>
#include <asm/div64.h>
#include <asm/sections.h>
#include <asm/smtc_ipi.h>
#include <asm/time.h>
#include <irq.h>
/*
* forward reference
*/
@ -62,14 +50,6 @@ int update_persistent_clock(struct timespec now)
return rtc_mips_set_mmss(now.tv_sec);
}
/*
* Null high precision timer functions for systems lacking one.
*/
static cycle_t null_hpt_read(void)
{
return 0;
}
/*
* High precision timer functions for a R4k-compatible timer.
*/
@ -80,22 +60,6 @@ static cycle_t c0_hpt_read(void)
int (*mips_timer_state)(void);
/*
* local_timer_interrupt() does profiling and process accounting
* on a per-CPU basis.
*
* In UP mode, it is invoked from the (global) timer_interrupt.
*
* In SMP mode, it might invoked by per-CPU timer interrupt, or
* a broadcasted inter-processor interrupt which itself is triggered
* by the global timer interrupt.
*/
void local_timer_interrupt(int irq, void *dev_id)
{
profile_tick(CPU_PROFILING);
update_process_times(user_mode(get_irq_regs()));
}
int null_perf_irq(void)
{
return 0;
@ -120,6 +84,13 @@ EXPORT_SYMBOL(perf_irq);
unsigned int mips_hpt_frequency;
static struct clocksource clocksource_mips = {
.name = "MIPS",
.read = c0_hpt_read,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static unsigned int __init calibrate_hpt(void)
{
cycle_t frequency, hpt_start, hpt_end, hpt_count, hz;
@ -162,12 +133,6 @@ static unsigned int __init calibrate_hpt(void)
return frequency >> log_2_loops;
}
struct clocksource clocksource_mips = {
.name = "MIPS",
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock)
{
u64 temp;
@ -203,9 +168,6 @@ void __cpuinit clockevent_set_clock(struct clock_event_device *cd,
static void __init init_mips_clocksource(void)
{
if (!mips_hpt_frequency || clocksource_mips.read == null_hpt_read)
return;
/* Calclate a somewhat reasonable rating value */
clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000;
@ -227,7 +189,7 @@ void __init __weak plat_time_init(void)
* setup_irq calls and each clock_event_device should use its own
* struct irqrequest.
*/
void __init plat_timer_setup(struct irqaction *irq)
void __init plat_timer_setup(void)
{
BUG();
}
@ -236,21 +198,8 @@ void __init time_init(void)
{
plat_time_init();
/* Choose appropriate high precision timer routines. */
if (!cpu_has_counter && !clocksource_mips.read)
/* No high precision timer -- sorry. */
clocksource_mips.read = null_hpt_read;
else if (!mips_hpt_frequency && !mips_timer_state) {
/* A high precision timer of unknown frequency. */
if (!clocksource_mips.read)
/* No external high precision timer -- use R4k. */
clocksource_mips.read = c0_hpt_read;
} else {
if (cpu_has_counter && (mips_hpt_frequency || mips_timer_state)) {
/* We know counter frequency. Or we can get it. */
if (!clocksource_mips.read) {
/* No external high precision timer -- use R4k. */
clocksource_mips.read = c0_hpt_read;
}
if (!mips_hpt_frequency)
mips_hpt_frequency = calibrate_hpt();
@ -258,8 +207,8 @@ void __init time_init(void)
printk("Using %u.%03u MHz high precision timer.\n",
((mips_hpt_frequency + 500) / 1000) / 1000,
((mips_hpt_frequency + 500) / 1000) % 1000);
init_mips_clocksource();
}
init_mips_clocksource();
mips_clockevent_init();
}

View File

@ -1,4 +1,5 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/linkage.h>
#include <asm/i8259.h>

View File

@ -131,7 +131,7 @@ static struct irq_chip rt_irq_type = {
static int rt_next_event(unsigned long delta, struct clock_event_device *evt)
{
unsigned int cpu = smp_processor_id();
int slice putoslice(cpu);
int slice = cputoslice(cpu);
unsigned long cnt;
cnt = LOCAL_HUB_L(PI_RT_COUNT);
@ -169,7 +169,7 @@ static irqreturn_t hub_rt_counter_handler(int irq, void *dev_id)
/*
* Ack
*/
LOCAL_HUB_S(PI_RT_PEND_A + PI_COUNT_OFFSET * slice, cnt);
LOCAL_HUB_S(PI_RT_PEND_A + PI_COUNT_OFFSET * slice, 0);
cd->event_handler(cd);
return IRQ_HANDLED;

View File

@ -42,7 +42,7 @@ static struct platform_device uart8250_device = {
static int __init uart8250_init(void)
{
uart8250_data[0].membase = (void __iomem *) &mace->isa.serial1;
uart8250_data[1].membase = (void __iomem *) &mace->isa.serial1;
uart8250_data[1].membase = (void __iomem *) &mace->isa.serial2;
return platform_device_register(&uart8250_device);
}

View File

@ -1,5 +1,7 @@
config SIBYTE_SB1250
bool
select CEVT_SB1250
select CSRC_SB1250
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_ENABLE_LDT_IF_PCI
@ -9,6 +11,8 @@ config SIBYTE_SB1250
config SIBYTE_BCM1120
bool
select CEVT_SB1250
select CSRC_SB1250
select IRQ_CPU
select SIBYTE_BCM112X
select SIBYTE_HAS_ZBUS_PROFILING
@ -16,6 +20,8 @@ config SIBYTE_BCM1120
config SIBYTE_BCM1125
bool
select CEVT_SB1250
select CSRC_SB1250
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_BCM112X
@ -24,6 +30,8 @@ config SIBYTE_BCM1125
config SIBYTE_BCM1125H
bool
select CEVT_SB1250
select CSRC_SB1250
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_BCM112X
@ -33,12 +41,16 @@ config SIBYTE_BCM1125H
config SIBYTE_BCM112X
bool
select CEVT_SB1250
select CSRC_SB1250
select IRQ_CPU
select SIBYTE_SB1xxx_SOC
select SIBYTE_HAS_ZBUS_PROFILING
config SIBYTE_BCM1x80
bool
select CEVT_BCM1480
select CSRC_BCM1480
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_HAS_ZBUS_PROFILING
@ -47,6 +59,8 @@ config SIBYTE_BCM1x80
config SIBYTE_BCM1x55
bool
select CEVT_BCM1480
select CSRC_BCM1480
select HW_HAS_PCI
select IRQ_CPU
select SIBYTE_SB1xxx_SOC

View File

@ -265,21 +265,6 @@ void __init init_bcm1480_irqs(void)
}
}
static irqreturn_t bcm1480_dummy_handler(int irq, void *dev_id)
{
return IRQ_NONE;
}
static struct irqaction bcm1480_dummy_action = {
.handler = bcm1480_dummy_handler,
.flags = 0,
.mask = CPU_MASK_NONE,
.name = "bcm1480-private",
.next = NULL,
.dev_id = 0
};
/*
* init_IRQ is called early in the boot sequence from init/main.c. It
* is responsible for setting up the interrupt mapper and installing the
@ -308,7 +293,6 @@ static struct irqaction bcm1480_dummy_action = {
void __init arch_init_irq(void)
{
unsigned int i, cpu;
u64 tmp;
unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |

View File

@ -15,163 +15,10 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/percpu.h>
#include <linux/spinlock.h>
#include <linux/init.h>
#include <asm/addrspace.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/sibyte/bcm1480_regs.h>
#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/bcm1480_int.h>
#include <asm/sibyte/bcm1480_scd.h>
#include <asm/sibyte/sb1250.h>
#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0
#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
/*
* The general purpose timer ticks at 1MHz independent if
* the rest of the system
*/
static void sibyte_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
unsigned int cpu = smp_processor_id();
void __iomem *timer_cfg, *timer_init;
timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
__raw_writeq(0, timer_cfg);
__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, timer_init);
__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
timer_cfg);
break;
case CLOCK_EVT_MODE_ONESHOT:
/* Stop the timer until we actually program a shot */
case CLOCK_EVT_MODE_SHUTDOWN:
__raw_writeq(0, timer_cfg);
break;
case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
case CLOCK_EVT_MODE_RESUME:
;
}
}
static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
{
unsigned int cpu = smp_processor_id();
void __iomem *timer_init;
unsigned int cnt;
int res;
timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
cnt = __raw_readq(timer_init);
cnt += delta;
__raw_writeq(cnt, timer_init);
res = ((long)(__raw_readq(timer_init) - cnt ) > 0) ? -ETIME : 0;
return res;
}
static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
{
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd = dev_id;
void __iomem *timer_cfg;
timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
/* Reset the timer */
__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
timer_cfg);
cd->event_handler(cd);
return IRQ_HANDLED;
}
static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
void __cpuinit sb1480_clockevent_init(void)
{
unsigned int cpu = smp_processor_id();
unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu;
struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
BUG_ON(cpu > 3); /* Only have 4 general purpose timers */
sprintf(name, "bcm1480-counter %d", cpu);
cd->name = name;
cd->features = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_ONESHOT;
clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd);
cd->min_delta_ns = clockevent_delta2ns(1, cd);
cd->rating = 200;
cd->irq = irq;
cd->cpumask = cpumask_of_cpu(cpu);
cd->set_next_event = sibyte_next_event;
cd->set_mode = sibyte_set_mode;
clockevents_register_device(cd);
bcm1480_mask_irq(cpu, irq);
/*
* Map timer interrupt to IP[4] of this cpu
*/
__raw_writeq(IMR_IP4_VAL,
IOADDR(A_BCM1480_IMR_REGISTER(cpu,
R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (irq << 3)));
bcm1480_unmask_irq(cpu, irq);
action->handler = sibyte_counter_handler;
action->flags = IRQF_DISABLED | IRQF_PERCPU;
action->name = name;
action->dev_id = cd;
setup_irq(irq, action);
}
static cycle_t bcm1480_hpt_read(void)
{
return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT));
}
struct clocksource bcm1480_clocksource = {
.name = "zbbus-cycles",
.rating = 200,
.read = bcm1480_hpt_read,
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
void __init sb1480_clocksource_init(void)
{
struct clocksource *cs = &bcm1480_clocksource;
unsigned int plldiv;
unsigned long zbbus;
plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000);
clocksource_set_clock(cs, zbbus);
clocksource_register(cs);
}
extern void sb1480_clockevent_init(void);
extern void sb1480_clocksource_init(void);
void __init plat_time_init(void)
{

View File

@ -236,20 +236,6 @@ void __init init_sb1250_irqs(void)
}
static irqreturn_t sb1250_dummy_handler(int irq, void *dev_id)
{
return IRQ_NONE;
}
static struct irqaction sb1250_dummy_action = {
.handler = sb1250_dummy_handler,
.flags = 0,
.mask = CPU_MASK_NONE,
.name = "sb1250-private",
.next = NULL,
.dev_id = 0
};
/*
* arch_init_irq is called early in the boot sequence from init/main.c via
* init_IRQ. It is responsible for setting up the interrupt mapper and

View File

@ -15,195 +15,10 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/init.h>
/*
* These are routines to set up and handle interrupts from the
* sb1250 general purpose timer 0. We're using the timer as a
* system clock, so we set it up to run at 100 Hz. On every
* interrupt, we update our idea of what the time of day is,
* then call do_timer() in the architecture-independent kernel
* code to do general bookkeeping (e.g. update jiffies, run
* bottom halves, etc.)
*/
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/kernel_stat.h>
#include <asm/irq.h>
#include <asm/addrspace.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/sibyte/sb1250.h>
#include <asm/sibyte/sb1250_regs.h>
#include <asm/sibyte/sb1250_int.h>
#include <asm/sibyte/sb1250_scd.h>
#define IMR_IP2_VAL K_INT_MAP_I0
#define IMR_IP3_VAL K_INT_MAP_I1
#define IMR_IP4_VAL K_INT_MAP_I2
#define SB1250_HPT_NUM 3
#define SB1250_HPT_VALUE M_SCD_TIMER_CNT /* max value */
/*
* The general purpose timer ticks at 1 Mhz independent if
* the rest of the system
*/
static void sibyte_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
unsigned int cpu = smp_processor_id();
void __iomem *timer_cfg, *timer_init;
timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
switch(mode) {
case CLOCK_EVT_MODE_PERIODIC:
__raw_writeq(0, timer_cfg);
__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, timer_init);
__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
timer_cfg);
break;
case CLOCK_EVT_MODE_ONESHOT:
/* Stop the timer until we actually program a shot */
case CLOCK_EVT_MODE_SHUTDOWN:
__raw_writeq(0, timer_cfg);
break;
case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
case CLOCK_EVT_MODE_RESUME:
;
}
}
static int
sibyte_next_event(unsigned long delta, struct clock_event_device *evt)
{
unsigned int cpu = smp_processor_id();
void __iomem *timer_cfg, *timer_init;
timer_cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
timer_init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
__raw_writeq(0, timer_cfg);
__raw_writeq(delta, timer_init);
__raw_writeq(M_SCD_TIMER_ENABLE, timer_cfg);
return 0;
}
static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
{
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd = dev_id;
/* ACK interrupt */
____raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG)));
cd->event_handler(cd);
return IRQ_HANDLED;
}
static struct irqaction sibyte_irqaction = {
.handler = sibyte_counter_handler,
.flags = IRQF_DISABLED | IRQF_PERCPU,
.name = "timer",
};
static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
void __cpuinit sb1250_clockevent_init(void)
{
unsigned int cpu = smp_processor_id();
unsigned int irq = K_INT_TIMER_0 + cpu;
struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
/* Only have 4 general purpose timers, and we use last one as hpt */
BUG_ON(cpu > 2);
sprintf(name, "bcm1480-counter %d", cpu);
cd->name = name;
cd->features = CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_ONESHOT;
clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd);
cd->min_delta_ns = clockevent_delta2ns(1, cd);
cd->rating = 200;
cd->irq = irq;
cd->cpumask = cpumask_of_cpu(cpu);
cd->set_next_event = sibyte_next_event;
cd->set_mode = sibyte_set_mode;
clockevents_register_device(cd);
sb1250_mask_irq(cpu, irq);
/* Map the timer interrupt to ip[4] of this cpu */
__raw_writeq(IMR_IP4_VAL,
IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
(irq << 3)));
cd->cpumask = cpumask_of_cpu(0);
sb1250_unmask_irq(cpu, irq);
action->handler = sibyte_counter_handler;
action->flags = IRQF_DISABLED | IRQF_PERCPU;
action->name = name;
action->dev_id = cd;
setup_irq(irq, &sibyte_irqaction);
}
/*
* The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
* again.
*/
static cycle_t sb1250_hpt_read(void)
{
unsigned int count;
count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT))));
return SB1250_HPT_VALUE - count;
}
struct clocksource bcm1250_clocksource = {
.name = "MIPS",
.rating = 200,
.read = sb1250_hpt_read,
.mask = CLOCKSOURCE_MASK(23),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
void __init sb1250_clocksource_init(void)
{
struct clocksource *cs = &bcm1250_clocksource;
/* Setup hpt using timer #3 but do not enable irq for it */
__raw_writeq(0,
IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
R_SCD_TIMER_CFG)));
__raw_writeq(SB1250_HPT_VALUE,
IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
R_SCD_TIMER_INIT)));
__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
R_SCD_TIMER_CFG)));
clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
clocksource_register(cs);
}
extern void sb1250_clocksource_init(void);
extern void sb1250_clockevent_init(void);
void __init plat_time_init(void)
{

View File

@ -1,6 +1,7 @@
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/time.h>
#include <linux/clockchips.h>
#include <asm/i8253.h>
#include <asm/sni.h>
@ -80,7 +81,7 @@ static void __init sni_a20r_timer_setup(void)
unsigned int cpu = smp_processor_id();
cd->cpumask = cpumask_of_cpu(cpu);
clockevents_register_device(cd);
action->dev_id = cd;
setup_irq(SNI_A20R_IRQ_TIMER, &a20r_irqaction);
}
@ -169,8 +170,6 @@ void __init plat_time_init(void)
mips_hpt_frequency = r4k_tick * HZ;
setup_pit_timer();
switch (sni_brd_type) {
case SNI_BRD_10:
case SNI_BRD_10NEW:

View File

@ -10,21 +10,6 @@
#define PIT_CH0 0x40
#define PIT_CH2 0x42
/* i8259A PIC registers */
#define PIC_MASTER_CMD 0x20
#define PIC_MASTER_IMR 0x21
#define PIC_MASTER_ISR PIC_MASTER_CMD
#define PIC_MASTER_POLL PIC_MASTER_ISR
#define PIC_MASTER_OCW3 PIC_MASTER_ISR
#define PIC_SLAVE_CMD 0xa0
#define PIC_SLAVE_IMR 0xa1
/* i8259A PIC related value */
#define PIC_CASCADE_IR 2
#define MASTER_ICW4_DEFAULT 0x01
#define SLAVE_ICW4_DEFAULT 0x01
#define PIC_ICW4_AEOI 2
extern void setup_pit_timer(void);
#endif /* __ASM_I8253_H */

View File

@ -1,13 +0,0 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003 by Ralf Baechle
*/
#ifndef __ASM_MACH_AU1X00_TIMEX_H
#define __ASM_MACH_AU1X00_TIMEX_H
#define CLOCK_TICK_RATE ((HZ * 100000UL) / 2)
#endif /* __ASM_MACH_AU1X00_TIMEX_H */

View File

@ -35,7 +35,7 @@
* 4 - ethernet
* 5 - 16550 UART
* 6 - cascade i8259
* 7 - CP0 counter (unused)
* 7 - CP0 counter
*/
#define MIPS_CPU_IRQ_BASE 16
@ -48,7 +48,6 @@
#define SCSI_IRQ (MIPS_CPU_IRQ_BASE + 5)
#define I8259_CASCADE_IRQ (MIPS_CPU_IRQ_BASE + 6)
#define GT641XX_IRQ_BASE 24
#include <asm/irq_gt641xx.h>

View File

@ -1,13 +0,0 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003, 2005 by Ralf Baechle
*/
#ifndef __ASM_MACH_GENERIC_TIMEX_H
#define __ASM_MACH_GENERIC_TIMEX_H
#define CLOCK_TICK_RATE 500000
#endif /* __ASM_MACH_GENERIC_TIMEX_H */

View File

@ -1,16 +0,0 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003 by Ralf Baechle
*/
#ifndef __ASM_MACH_JAZZ_TIMEX_H
#define __ASM_MACH_JAZZ_TIMEX_H
/*
* Jazz is still using the R4030 100Hz counter
*/
#define CLOCK_TICK_RATE 100
#endif /* __ASM_MACH_JAZZ_TIMEX_H */

View File

@ -1,16 +0,0 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2005 Daniel Jacobowitz
*/
#ifndef __ASM_MACH_QEMU_TIMEX_H
#define __ASM_MACH_QEMU_TIMEX_H
/*
* We use a simulated i8254 PIC...
*/
#define CLOCK_TICK_RATE 1193182
#endif /* __ASM_MACH_QEMU_TIMEX_H */

View File

@ -1,13 +0,0 @@
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2003, 2005 by Ralf Baechle
*/
#ifndef __ASM_MACH_RM200_TIMEX_H
#define __ASM_MACH_RM200_TIMEX_H
#define CLOCK_TICK_RATE 1193182
#endif /* __ASM_MACH_RM200_TIMEX_H */

View File

@ -10,15 +10,10 @@
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* Please refer to Documentation/mips/time.README.
*/
#ifndef _ASM_TIME_H
#define _ASM_TIME_H
#include <linux/interrupt.h>
#include <linux/linkage.h>
#include <linux/ptrace.h>
#include <linux/rtc.h>
#include <linux/spinlock.h>
#include <linux/clockchips.h>
@ -38,25 +33,12 @@ extern int rtc_mips_set_mmss(unsigned long);
/*
* Timer interrupt functions.
* mips_timer_state is needed for high precision timer calibration.
* mips_timer_ack may be NULL if the interrupt is self-recoverable.
*/
extern int (*mips_timer_state)(void);
/*
* High precision timer clocksource.
* If .read is NULL, an R4k-compatible timer setup is attempted.
*/
extern struct clocksource clocksource_mips;
/*
* profiling and process accouting is done separately in local_timer_interrupt
*/
extern void local_timer_interrupt(int irq, void *dev_id);
/*
* board specific routines required by time_init().
*/
struct irqaction;
extern void plat_time_init(void);
/*

View File

@ -13,27 +13,12 @@
#include <asm/mipsregs.h>
/*
* This is the frequency of the timer used for Linux's timer interrupt.
* The value should be defined as accurate as possible or under certain
* circumstances Linux timekeeping might become inaccurate or fail.
*
* For many system the exact clockrate of the timer isn't known but due to
* the way this value is used we can get away with a wrong value as long
* as this value is:
*
* - a multiple of HZ
* - a divisor of the actual rate
*
* 500000 is a good such cheat value.
*
* The obscure number 1193182 is the same as used by the original i8254
* time in legacy PC hardware; the chip unfortunately also found in a
* bunch of MIPS systems. The last remaining user of the i8254 for the
* timer interrupt is the RM200; it's a very standard system so there is
* no reason to make this a separate architecture.
* This is the clock rate of the i8253 PIT. A MIPS system may not have
* a PIT by the symbol is used all over the kernel including some APIs.
* So keeping it defined to the number for the PIT is the only sane thing
* for now.
*/
#include <timex.h>
#define CLOCK_TICK_RATE 1193182
/*
* Standard way to access the cycle counter.