mirror of
https://github.com/torvalds/linux.git
synced 2024-12-15 07:33:56 +00:00
[media] cx23855: add support for DVBSky T9580 DVB-C/T2/S2 tuner
DVBSky T9580 is a dual tuner card with one DVB-T2/C tuner and one DVB-S2 tuner. It contains the following components: - PCIe bridge: Conexant CX23885 - Demod for terrestrial/cable: Silicon Labs Si2168-A30 - Tuner for terrestrial/cable: Silicon Labs Si2158-A20 - Demod for sat: Montage DS3103 - Tuner for sat: Montage TS2022 This patch depends on Max Nibble's patch for m88ds3103 (see patchwork 25312: https://patchwork.linuxtv.org/patch/25312/ ). 3 firmwares are needed: - Si2168-A30 demod and Si2158-A20 tuner: same as TechnoTrend CT2-4400, https://www.mail-archive.com/linux-media@vger.kernel.org/msg76944.html - Montage DS3103 demod: same as PCTV 461e, Antti has it on his LinuxTV project page: http://palosaari.fi/linux/v4l-dvb/firmware/M88DS3103/ IR receiver is not supported. Values in cx23885_gpio_setup, cx23885_card_setup and dvbsky_t9580_set_voltage as well as the EEPROM read function are taken from the manufacturer provided semi-open source driver. The drivers in question are Linux GPL'd media tree drivers for cx23885 modified by Max Nibble (nibble.max@gmail.com) with proprietary tuner/demod drivers. Max is aware of this patch and has approved my use of the values in this patch. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This commit is contained in:
Olli Salonen
Mauro Carvalho Chehab
parent
5cd3b6b40d
commit
2944226622
@ -31,12 +31,16 @@ config VIDEO_CX23885
|
||||
select DVB_A8293 if MEDIA_SUBDRV_AUTOSELECT
|
||||
select DVB_MB86A20S if MEDIA_SUBDRV_AUTOSELECT
|
||||
select DVB_SI2165 if MEDIA_SUBDRV_AUTOSELECT
|
||||
select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
|
||||
select DVB_M88DS3103 if MEDIA_SUBDRV_AUTOSELECT
|
||||
select MEDIA_TUNER_MT2063 if MEDIA_SUBDRV_AUTOSELECT
|
||||
select MEDIA_TUNER_MT2131 if MEDIA_SUBDRV_AUTOSELECT
|
||||
select MEDIA_TUNER_XC2028 if MEDIA_SUBDRV_AUTOSELECT
|
||||
select MEDIA_TUNER_TDA8290 if MEDIA_SUBDRV_AUTOSELECT
|
||||
select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
|
||||
select MEDIA_TUNER_XC5000 if MEDIA_SUBDRV_AUTOSELECT
|
||||
select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT
|
||||
select MEDIA_TUNER_M88TS2022 if MEDIA_SUBDRV_AUTOSELECT
|
||||
select DVB_TUNER_DIB0070 if MEDIA_SUBDRV_AUTOSELECT
|
||||
---help---
|
||||
This is a video4linux driver for Conexant 23885 based
|
||||
|
||||
@ -675,6 +675,11 @@ struct cx23885_board cx23885_boards[] = {
|
||||
.amux = CX25840_AUDIO7,
|
||||
} },
|
||||
},
|
||||
[CX23885_BOARD_DVBSKY_T9580] = {
|
||||
.name = "DVBSky T9580",
|
||||
.portb = CX23885_MPEG_DVB,
|
||||
.portc = CX23885_MPEG_DVB,
|
||||
},
|
||||
};
|
||||
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
|
||||
|
||||
@ -930,6 +935,10 @@ struct cx23885_subid cx23885_subids[] = {
|
||||
.subvendor = 0x18ac,
|
||||
.subdevice = 0xdb98,
|
||||
.card = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2,
|
||||
}, {
|
||||
.subvendor = 0x4254,
|
||||
.subdevice = 0x9580,
|
||||
.card = CX23885_BOARD_DVBSKY_T9580,
|
||||
},
|
||||
};
|
||||
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
|
||||
@ -1524,6 +1533,14 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
|
||||
cx_set(GP0_IO, 0x00040004);
|
||||
mdelay(60);
|
||||
break;
|
||||
case CX23885_BOARD_DVBSKY_T9580:
|
||||
/* enable GPIO3-18 pins */
|
||||
cx_write(MC417_CTL, 0x00000037);
|
||||
cx23885_gpio_enable(dev, GPIO_2 | GPIO_11, 1);
|
||||
cx23885_gpio_clear(dev, GPIO_2 | GPIO_11);
|
||||
mdelay(100);
|
||||
cx23885_gpio_set(dev, GPIO_2 | GPIO_11);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
@ -1847,6 +1864,14 @@ void cx23885_card_setup(struct cx23885_dev *dev)
|
||||
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
|
||||
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
|
||||
break;
|
||||
case CX23885_BOARD_DVBSKY_T9580:
|
||||
ts1->gen_ctrl_val = 0x5; /* Parallel */
|
||||
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
|
||||
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
|
||||
ts2->gen_ctrl_val = 0x8; /* Serial bus */
|
||||
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
|
||||
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
|
||||
break;
|
||||
case CX23885_BOARD_HAUPPAUGE_HVR1250:
|
||||
case CX23885_BOARD_HAUPPAUGE_HVR1500:
|
||||
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
|
||||
@ -1909,6 +1934,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
|
||||
case CX23885_BOARD_AVERMEDIA_HC81R:
|
||||
case CX23885_BOARD_TBS_6980:
|
||||
case CX23885_BOARD_TBS_6981:
|
||||
case CX23885_BOARD_DVBSKY_T9580:
|
||||
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
|
||||
&dev->i2c_bus[2].i2c_adap,
|
||||
"cx25840", 0x88 >> 1, NULL);
|
||||
|
||||
@ -69,6 +69,10 @@
|
||||
#include "a8293.h"
|
||||
#include "mb86a20s.h"
|
||||
#include "si2165.h"
|
||||
#include "si2168.h"
|
||||
#include "si2157.h"
|
||||
#include "m88ds3103.h"
|
||||
#include "m88ts2022.h"
|
||||
|
||||
static unsigned int debug;
|
||||
|
||||
@ -583,6 +587,35 @@ static int p8000_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int dvbsky_t9580_set_voltage(struct dvb_frontend *fe,
|
||||
fe_sec_voltage_t voltage)
|
||||
{
|
||||
struct cx23885_tsport *port = fe->dvb->priv;
|
||||
struct cx23885_dev *dev = port->dev;
|
||||
|
||||
cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1);
|
||||
|
||||
switch (voltage) {
|
||||
case SEC_VOLTAGE_13:
|
||||
cx23885_gpio_set(dev, GPIO_1);
|
||||
cx23885_gpio_clear(dev, GPIO_0);
|
||||
break;
|
||||
case SEC_VOLTAGE_18:
|
||||
cx23885_gpio_set(dev, GPIO_1);
|
||||
cx23885_gpio_set(dev, GPIO_0);
|
||||
break;
|
||||
case SEC_VOLTAGE_OFF:
|
||||
cx23885_gpio_clear(dev, GPIO_1);
|
||||
cx23885_gpio_clear(dev, GPIO_0);
|
||||
break;
|
||||
}
|
||||
|
||||
/* call the frontend set_voltage function */
|
||||
port->fe_set_voltage(fe, voltage);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int cx23885_dvb_set_frontend(struct dvb_frontend *fe)
|
||||
{
|
||||
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
|
||||
@ -747,6 +780,19 @@ static const struct si2165_config hauppauge_hvr4400_si2165_config = {
|
||||
.ref_freq_Hz = 16000000,
|
||||
};
|
||||
|
||||
static const struct m88ds3103_config dvbsky_t9580_m88ds3103_config = {
|
||||
.i2c_addr = 0x68,
|
||||
.clock = 27000000,
|
||||
.i2c_wr_max = 33,
|
||||
.clock_out = 0,
|
||||
.ts_mode = M88DS3103_TS_PARALLEL,
|
||||
.ts_clk = 16000,
|
||||
.ts_clk_pol = 1,
|
||||
.lnb_en_pol = 1,
|
||||
.lnb_hv_pol = 0,
|
||||
.agc = 0x99,
|
||||
};
|
||||
|
||||
static int netup_altera_fpga_rw(void *device, int flag, int data, int read)
|
||||
{
|
||||
struct cx23885_dev *dev = (struct cx23885_dev *)device;
|
||||
@ -896,6 +942,13 @@ static int dvb_register(struct cx23885_tsport *port)
|
||||
struct cx23885_dev *dev = port->dev;
|
||||
struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL;
|
||||
struct vb2_dvb_frontend *fe0, *fe1 = NULL;
|
||||
struct si2168_config si2168_config;
|
||||
struct si2157_config si2157_config;
|
||||
struct m88ts2022_config m88ts2022_config;
|
||||
struct i2c_board_info info;
|
||||
struct i2c_adapter *adapter;
|
||||
struct i2c_client *client_demod;
|
||||
struct i2c_client *client_tuner;
|
||||
int mfe_shared = 0; /* bus not shared by default */
|
||||
int ret;
|
||||
|
||||
@ -1533,6 +1586,97 @@ static int dvb_register(struct cx23885_tsport *port)
|
||||
break;
|
||||
}
|
||||
break;
|
||||
case CX23885_BOARD_DVBSKY_T9580:
|
||||
i2c_bus = &dev->i2c_bus[0];
|
||||
i2c_bus2 = &dev->i2c_bus[1];
|
||||
switch (port->nr) {
|
||||
/* port b - satellite */
|
||||
case 1:
|
||||
/* attach frontend */
|
||||
fe0->dvb.frontend = dvb_attach(m88ds3103_attach,
|
||||
&dvbsky_t9580_m88ds3103_config,
|
||||
&i2c_bus2->i2c_adap, &adapter);
|
||||
if (fe0->dvb.frontend == NULL)
|
||||
break;
|
||||
|
||||
/* attach tuner */
|
||||
m88ts2022_config.fe = fe0->dvb.frontend;
|
||||
m88ts2022_config.clock = 27000000;
|
||||
memset(&info, 0, sizeof(struct i2c_board_info));
|
||||
strlcpy(info.type, "m88ts2022", I2C_NAME_SIZE);
|
||||
info.addr = 0x60;
|
||||
info.platform_data = &m88ts2022_config;
|
||||
request_module(info.type);
|
||||
client_tuner = i2c_new_device(adapter, &info);
|
||||
if (client_tuner == NULL ||
|
||||
client_tuner->dev.driver == NULL)
|
||||
goto frontend_detach;
|
||||
if (!try_module_get(client_tuner->dev.driver->owner)) {
|
||||
i2c_unregister_device(client_tuner);
|
||||
goto frontend_detach;
|
||||
}
|
||||
|
||||
/* delegate signal strength measurement to tuner */
|
||||
fe0->dvb.frontend->ops.read_signal_strength =
|
||||
fe0->dvb.frontend->ops.tuner_ops.get_rf_strength;
|
||||
|
||||
/*
|
||||
* for setting the voltage we need to set GPIOs on
|
||||
* the card.
|
||||
*/
|
||||
port->fe_set_voltage =
|
||||
fe0->dvb.frontend->ops.set_voltage;
|
||||
fe0->dvb.frontend->ops.set_voltage =
|
||||
dvbsky_t9580_set_voltage;
|
||||
|
||||
port->i2c_client_tuner = client_tuner;
|
||||
|
||||
break;
|
||||
/* port c - terrestrial/cable */
|
||||
case 2:
|
||||
/* attach frontend */
|
||||
si2168_config.i2c_adapter = &adapter;
|
||||
si2168_config.fe = &fe0->dvb.frontend;
|
||||
si2168_config.ts_mode = SI2168_TS_SERIAL;
|
||||
memset(&info, 0, sizeof(struct i2c_board_info));
|
||||
strlcpy(info.type, "si2168", I2C_NAME_SIZE);
|
||||
info.addr = 0x64;
|
||||
info.platform_data = &si2168_config;
|
||||
request_module(info.type);
|
||||
client_demod = i2c_new_device(&i2c_bus->i2c_adap, &info);
|
||||
if (client_demod == NULL ||
|
||||
client_demod->dev.driver == NULL)
|
||||
goto frontend_detach;
|
||||
if (!try_module_get(client_demod->dev.driver->owner)) {
|
||||
i2c_unregister_device(client_demod);
|
||||
goto frontend_detach;
|
||||
}
|
||||
port->i2c_client_demod = client_demod;
|
||||
|
||||
/* attach tuner */
|
||||
si2157_config.fe = fe0->dvb.frontend;
|
||||
memset(&info, 0, sizeof(struct i2c_board_info));
|
||||
strlcpy(info.type, "si2157", I2C_NAME_SIZE);
|
||||
info.addr = 0x60;
|
||||
info.platform_data = &si2157_config;
|
||||
request_module(info.type);
|
||||
client_tuner = i2c_new_device(adapter, &info);
|
||||
if (client_tuner == NULL ||
|
||||
client_tuner->dev.driver == NULL) {
|
||||
module_put(client_demod->dev.driver->owner);
|
||||
i2c_unregister_device(client_demod);
|
||||
goto frontend_detach;
|
||||
}
|
||||
if (!try_module_get(client_tuner->dev.driver->owner)) {
|
||||
i2c_unregister_device(client_tuner);
|
||||
module_put(client_demod->dev.driver->owner);
|
||||
i2c_unregister_device(client_demod);
|
||||
goto frontend_detach;
|
||||
}
|
||||
port->i2c_client_tuner = client_tuner;
|
||||
break;
|
||||
}
|
||||
break;
|
||||
default:
|
||||
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
|
||||
" isn't supported yet\n",
|
||||
@ -1607,6 +1751,22 @@ static int dvb_register(struct cx23885_tsport *port)
|
||||
memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xa0, 6);
|
||||
break;
|
||||
}
|
||||
case CX23885_BOARD_DVBSKY_T9580: {
|
||||
u8 eeprom[256]; /* 24C02 i2c eeprom */
|
||||
|
||||
if (port->nr > 2)
|
||||
break;
|
||||
|
||||
/* Read entire EEPROM */
|
||||
dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1;
|
||||
tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom,
|
||||
sizeof(eeprom));
|
||||
printk(KERN_INFO "DVBSky T9580 port %d MAC address: %pM\n",
|
||||
port->nr, eeprom + 0xc0 + (port->nr-1) * 8);
|
||||
memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xc0 +
|
||||
(port->nr-1) * 8, 6);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
return ret;
|
||||
|
||||
@ -92,6 +92,7 @@
|
||||
#define CX23885_BOARD_LEADTEK_WINFAST_PXPVR2200 42
|
||||
#define CX23885_BOARD_HAUPPAUGE_IMPACTVCBE 43
|
||||
#define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2 44
|
||||
#define CX23885_BOARD_DVBSKY_T9580 45
|
||||
|
||||
#define GPIO_0 0x00000001
|
||||
#define GPIO_1 0x00000002
|
||||
|
||||
Loading…
Reference in New Issue
Block a user