xhci: Improve detection of device initiated wake signal.

A xHC USB 3 port might miss the first wake signal from a USB 3 device
if the port LFPS reveiver isn't enabled fast enough after xHC resume.

xHC host will anyway be resumed by a PME# signal, but will go back to
suspend if no port activity is seen.
The device resends the U3 LFPS wake signal after a 100ms delay, but
by then host is already suspended, starting all over from the
beginning of this issue.

USB 3 specs say U3 wake LFPS signal is sent for max 10ms, then device
needs to delay 100ms before resending the wake.

Don't suspend immediately if port activity isn't detected in resume.
Instead add a retry. If there is no port activity then delay for 120ms,
and re-check for port activity.

Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210311115353.2137560-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Mathias Nyman 2021-03-11 13:53:51 +02:00 committed by Greg Kroah-Hartman
parent a4a251f8c2
commit 253f588c70

View File

@ -1088,6 +1088,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
struct usb_hcd *secondary_hcd;
int retval = 0;
bool comp_timer_running = false;
bool pending_portevent = false;
if (!hcd->state)
return 0;
@ -1226,13 +1227,22 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
done:
if (retval == 0) {
/* Resume root hubs only when have pending events. */
if (xhci_pending_portevent(xhci)) {
/*
* Resume roothubs only if there are pending events.
* USB 3 devices resend U3 LFPS wake after a 100ms delay if
* the first wake signalling failed, give it that chance.
*/
pending_portevent = xhci_pending_portevent(xhci);
if (!pending_portevent) {
msleep(120);
pending_portevent = xhci_pending_portevent(xhci);
}
if (pending_portevent) {
usb_hcd_resume_root_hub(xhci->shared_hcd);
usb_hcd_resume_root_hub(hcd);
}
}
/*
* If system is subject to the Quirk, Compliance Mode Timer needs to
* be re-initialized Always after a system resume. Ports are subject