From 2772ae4d66d17c6a8b4c167ddb660fc8d7972da5 Mon Sep 17 00:00:00 2001 From: WANG Xuerui Date: Wed, 17 Jan 2024 12:42:59 +0800 Subject: [PATCH 01/22] modpost: Ignore relaxation and alignment marker relocs on LoongArch With recent trunk versions of binutils and gcc, alignment directives are represented with R_LARCH_ALIGN relocs on LoongArch, which is necessary for the linker to maintain alignment requirements during its relaxation passes. And even though the kernel is built with relaxation disabled, so far a small number of R_LARCH_RELAX marker relocs are still emitted as part of la.* pseudo instructions in assembly. These two kinds of relocs do not refer to symbols, which can trip up modpost's section mismatch checks, because the r_offset of said relocs can be zero or any other meaningless value, eventually leading to a `from == NULL` condition in default_mismatch_handler and SIGSEGV. As the two kinds of relocs are not concerned with symbols, just ignore them for section mismatch check purposes. Signed-off-by: WANG Xuerui Signed-off-by: Huacai Chen --- scripts/mod/modpost.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index cb6406f485a9..68ab45273a22 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -1346,6 +1346,14 @@ static Elf_Addr addend_mips_rel(uint32_t *location, unsigned int r_type) #define R_LARCH_SUB32 55 #endif +#ifndef R_LARCH_RELAX +#define R_LARCH_RELAX 100 +#endif + +#ifndef R_LARCH_ALIGN +#define R_LARCH_ALIGN 102 +#endif + static void get_rel_type_and_sym(struct elf_info *elf, uint64_t r_info, unsigned int *r_type, unsigned int *r_sym) { @@ -1400,9 +1408,16 @@ static void section_rela(struct module *mod, struct elf_info *elf, continue; break; case EM_LOONGARCH: - if (!strcmp("__ex_table", fromsec) && - r_type == R_LARCH_SUB32) + switch (r_type) { + case R_LARCH_SUB32: + if (!strcmp("__ex_table", fromsec)) + continue; + break; + case R_LARCH_RELAX: + case R_LARCH_ALIGN: + /* These relocs do not refer to symbols */ continue; + } break; } From f58b0abae839f06be9d791d16196922a4b281777 Mon Sep 17 00:00:00 2001 From: WANG Rui Date: Wed, 17 Jan 2024 12:43:00 +0800 Subject: [PATCH 02/22] scripts/min-tool-version.sh: Raise minimum clang version to 18.0.0 for loongarch The existing mainline clang development version encounters difficulties compiling the LoongArch kernel module. It is anticipated that this issue will be resolved in the upcoming 18.0.0 release. To prevent user confusion arising from broken builds, it is advisable to raise the minimum required clang version for LoongArch to 18.0.0. Suggested-by: Nathan Chancellor Reviewed-by: Nathan Chancellor Acked-by: Nick Desaulniers Link: https://github.com/ClangBuiltLinux/linux/issues/1941 Signed-off-by: Tiezhu Yang Signed-off-by: WANG Rui Signed-off-by: Huacai Chen --- scripts/min-tool-version.sh | 2 ++ 1 file changed, 2 insertions(+) diff --git a/scripts/min-tool-version.sh b/scripts/min-tool-version.sh index fd5ffdb81bab..1c6ab10dc69e 100755 --- a/scripts/min-tool-version.sh +++ b/scripts/min-tool-version.sh @@ -26,6 +26,8 @@ gcc) llvm) if [ "$SRCARCH" = s390 ]; then echo 15.0.0 + elif [ "$SRCARCH" = loongarch ]; then + echo 18.0.0 else echo 11.0.0 fi From 90868ff9cadecd46fa2a4f5501c66bfea8ade9b7 Mon Sep 17 00:00:00 2001 From: WANG Rui Date: Wed, 17 Jan 2024 12:43:00 +0800 Subject: [PATCH 03/22] LoongArch: Enable initial Rust support Enable initial Rust support for LoongArch. Tested-by: Miguel Ojeda Signed-off-by: WANG Rui Signed-off-by: Huacai Chen --- Documentation/rust/arch-support.rst | 13 +++++++------ arch/loongarch/Kconfig | 1 + arch/loongarch/Makefile | 3 +++ scripts/generate_rust_target.rs | 7 +++++++ 4 files changed, 18 insertions(+), 6 deletions(-) diff --git a/Documentation/rust/arch-support.rst b/Documentation/rust/arch-support.rst index b91e9ef4d0c2..73203ba1e901 100644 --- a/Documentation/rust/arch-support.rst +++ b/Documentation/rust/arch-support.rst @@ -12,10 +12,11 @@ which uses ``libclang``. Below is a general summary of architectures that currently work. Level of support corresponds to ``S`` values in the ``MAINTAINERS`` file. -============ ================ ============================================== -Architecture Level of support Constraints -============ ================ ============================================== -``um`` Maintained ``x86_64`` only. -``x86`` Maintained ``x86_64`` only. -============ ================ ============================================== +============= ================ ============================================== +Architecture Level of support Constraints +============= ================ ============================================== +``loongarch`` Maintained - +``um`` Maintained ``x86_64`` only. +``x86`` Maintained ``x86_64`` only. +============= ================ ============================================== diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig index ee123820a476..6b9da3effdf8 100644 --- a/arch/loongarch/Kconfig +++ b/arch/loongarch/Kconfig @@ -140,6 +140,7 @@ config LOONGARCH select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_RETHOOK select HAVE_RSEQ + select HAVE_RUST select HAVE_SAMPLE_FTRACE_DIRECT select HAVE_SAMPLE_FTRACE_DIRECT_MULTI select HAVE_SETUP_PER_CPU_AREA if NUMA diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile index 4ba8d67ddb09..ba45cb7b621c 100644 --- a/arch/loongarch/Makefile +++ b/arch/loongarch/Makefile @@ -81,8 +81,11 @@ KBUILD_AFLAGS_MODULE += -Wa,-mla-global-with-abs KBUILD_CFLAGS_MODULE += -fplt -Wa,-mla-global-with-abs,-mla-local-with-abs endif +KBUILD_RUSTFLAGS_MODULE += -Crelocation-model=pic + ifeq ($(CONFIG_RELOCATABLE),y) KBUILD_CFLAGS_KERNEL += -fPIE +KBUILD_RUSTFLAGS_KERNEL += -Crelocation-model=pie LDFLAGS_vmlinux += -static -pie --no-dynamic-linker -z notext $(call ld-option, --apply-dynamic-relocs) endif diff --git a/scripts/generate_rust_target.rs b/scripts/generate_rust_target.rs index 3c6cbe2b278d..0da52b548ba5 100644 --- a/scripts/generate_rust_target.rs +++ b/scripts/generate_rust_target.rs @@ -161,6 +161,13 @@ fn main() { ts.push("features", features); ts.push("llvm-target", "x86_64-linux-gnu"); ts.push("target-pointer-width", "64"); + } else if cfg.has("LOONGARCH") { + ts.push("arch", "loongarch64"); + ts.push("data-layout", "e-m:e-p:64:64-i64:64-i128:128-n64-S128"); + ts.push("features", "-f,-d"); + ts.push("llvm-target", "loongarch64-linux-gnusf"); + ts.push("llvm-abiname", "lp64s"); + ts.push("target-pointer-width", "64"); } else { panic!("Unsupported architecture"); } From 8e07e0e3964ca4e23ce7b68e2096fe660a888942 Mon Sep 17 00:00:00 2001 From: Binbin Zhou Date: Wed, 17 Jan 2024 12:43:00 +0800 Subject: [PATCH 04/22] dt-bindings: loongarch: Add CPU bindings for LoongArch Add the available CPUs in LoongArch binding with DT schema format using json-schema. Reviewed-by: Conor Dooley Signed-off-by: Binbin Zhou Signed-off-by: Huacai Chen --- .../devicetree/bindings/loongarch/cpus.yaml | 61 +++++++++++++++++++ 1 file changed, 61 insertions(+) create mode 100644 Documentation/devicetree/bindings/loongarch/cpus.yaml diff --git a/Documentation/devicetree/bindings/loongarch/cpus.yaml b/Documentation/devicetree/bindings/loongarch/cpus.yaml new file mode 100644 index 000000000000..f175872995e1 --- /dev/null +++ b/Documentation/devicetree/bindings/loongarch/cpus.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/loongarch/cpus.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LoongArch CPUs + +maintainers: + - Binbin Zhou + +description: + This document describes the list of LoongArch CPU cores that support FDT, + it describe the layout of CPUs in a system through the "cpus" node. + +allOf: + - $ref: /schemas/cpu.yaml# + +properties: + compatible: + enum: + - loongson,la264 + - loongson,la364 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + #include + + cpus { + #size-cells = <0>; + #address-cells = <1>; + + cpu@0 { + compatible = "loongson,la264"; + device_type = "cpu"; + reg = <0>; + clocks = <&clk LOONGSON2_NODE_CLK>; + }; + + cpu@1 { + compatible = "loongson,la264"; + device_type = "cpu"; + reg = <1>; + clocks = <&clk LOONGSON2_NODE_CLK>; + }; + }; + +... From ec6b36edf0cea06d651ef14092921a339b4eea2f Mon Sep 17 00:00:00 2001 From: Binbin Zhou Date: Wed, 17 Jan 2024 12:43:00 +0800 Subject: [PATCH 05/22] dt-bindings: loongarch: Add Loongson SoC boards compatibles Add Loongson SoC boards binding with DT schema format using json-schema. Reviewed-by: Conor Dooley Signed-off-by: Binbin Zhou Signed-off-by: Huacai Chen --- .../bindings/loongarch/loongson.yaml | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 Documentation/devicetree/bindings/loongarch/loongson.yaml diff --git a/Documentation/devicetree/bindings/loongarch/loongson.yaml b/Documentation/devicetree/bindings/loongarch/loongson.yaml new file mode 100644 index 000000000000..e1a4a97b7576 --- /dev/null +++ b/Documentation/devicetree/bindings/loongarch/loongson.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/loongarch/loongson.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson SoC-based boards + +maintainers: + - Binbin Zhou + +properties: + $nodename: + const: '/' + compatible: + oneOf: + - description: Loongson-2K0500 processor based boards + items: + - const: loongson,ls2k0500-ref + - const: loongson,ls2k0500 + + - description: Loongson-2K1000 processor based boards + items: + - const: loongson,ls2k1000-ref + - const: loongson,ls2k1000 + + - description: Loongson-2K2000 processor based boards + items: + - const: loongson,ls2k2000-ref + - const: loongson,ls2k2000 + +additionalProperties: true + +... From aaeebb3ea4f2d6674b0fbc8bd48bf8862309f191 Mon Sep 17 00:00:00 2001 From: Binbin Zhou Date: Wed, 17 Jan 2024 12:43:00 +0800 Subject: [PATCH 06/22] dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for reg-names As we know, the Loongson-2K0500 is a single-core CPU, and the core1- related register (isr1) does not exist. So "reg" and "reg-names" should be set to "minItems 2"(main nad isr0). This fixes dtbs_check warning: DTC_CHK arch/loongarch/boot/dts/loongson-2k0500-ref.dtb arch/loongarch/boot/dts/loongson-2k0500-ref.dtb: interrupt-controller@1fe11400: reg-names: ['main', 'isr0'] is too short From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml arch/loongarch/boot/dts/loongson-2k0500-ref.dtb: interrupt-controller@1fe11400: Unevaluated properties are not allowed ('reg-names' was unexpected) From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml arch/loongarch/boot/dts/loongson-2k0500-ref.dtb: interrupt-controller@1fe11400: reg: [[0, 534844416, 0, 64], [0, 534843456, 0, 8]] is too short From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml arch/loongarch/boot/dts/loongson-2k0500-ref.dtb: interrupt-controller@1fe11440: reg-names: ['main', 'isr0'] is too short From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml Acked-by: Jiaxun Yang Reviewed-by: Rob Herring Signed-off-by: Binbin Zhou Signed-off-by: Huacai Chen --- .../interrupt-controller/loongson,liointc.yaml | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml index 00b570c82903..a3276c1d9b59 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml @@ -11,8 +11,13 @@ maintainers: description: | This interrupt controller is found in the Loongson-3 family of chips and - Loongson-2K1000 chip, as the primary package interrupt controller which + Loongson-2K series chips, as the primary package interrupt controller which can route local I/O interrupt to interrupt lines of cores. + Be aware of the following points. + 1.The Loongson-2K0500 is a single core CPU; + 2.The Loongson-2K0500/2K1000 has 64 device interrupt sources as inputs, so we + need to define two nodes in dts{i} to describe the "0-31" and "32-61" interrupt + sources respectively. allOf: - $ref: /schemas/interrupt-controller.yaml# @@ -33,6 +38,7 @@ properties: - const: main - const: isr0 - const: isr1 + minItems: 2 interrupt-controller: true @@ -86,7 +92,8 @@ if: then: properties: reg: - minItems: 3 + minItems: 2 + maxItems: 3 required: - reg-names From db8ce2407090f695339e3406a034377dcdc2c942 Mon Sep 17 00:00:00 2001 From: Binbin Zhou Date: Wed, 17 Jan 2024 12:43:00 +0800 Subject: [PATCH 07/22] dt-bindings: interrupt-controller: loongson,liointc: Fix dtbs_check warning for interrupt-names The Loongson-2K0500/2K1000 CPUs have 64 interrupt sources as inputs, and a route-mapped node handles up to 32 interrupt sources, so two liointc nodes are defined in dts{i}. Of course, we have to make sure that the routing outputs ("intx") of the two nodes do not conflict, i.e. "int0" can only be used as a routing output for one of them. Therefore, "interrupt-names" should be defined as "pattern". In addition, since "interrupt-names" and "interrupts" are one-to-one correspondence, we pass it to get the corresponding interrupt number in the driver. Setting it to "required" does not break ABI, because it is already logically represented as "required". This fixes dtbs_check warning: DTC_CHK arch/loongarch/boot/dts/loongson-2k0500-ref.dtb arch/loongarch/boot/dts/loongson-2k0500-ref.dtb: interrupt-controller@1fe11440: interrupt-names:0: 'int0' was expected From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml arch/loongarch/boot/dts/loongson-2k0500-ref.dtb: interrupt-controller@1fe11440: Unevaluated properties are not allowed ('interrupt-names' was unexpected) From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml DTC_CHK arch/loongarch/boot/dts/loongson-2k1000-ref.dtb arch/loongarch/boot/dts/loongson-2k1000-ref.dtb: interrupt-controller@1fe01440: interrupt-names:0: 'int0' was expected From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml arch/loongarch/boot/dts/loongson-2k1000-ref.dtb: interrupt-controller@1fe01440: Unevaluated properties are not allowed ('interrupt-names' was unexpected) From schema: Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml Acked-by: Jiaxun Yang Reviewed-by: Rob Herring Signed-off-by: Binbin Zhou Signed-off-by: Huacai Chen --- .../bindings/interrupt-controller/loongson,liointc.yaml | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml index a3276c1d9b59..60441f0c5d72 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml @@ -51,11 +51,9 @@ properties: interrupt-names: description: List of names for the parent interrupts. items: - - const: int0 - - const: int1 - - const: int2 - - const: int3 + pattern: int[0-3] minItems: 1 + maxItems: 4 '#interrupt-cells': const: 2 @@ -75,6 +73,7 @@ required: - compatible - reg - interrupts + - interrupt-names - interrupt-controller - '#interrupt-cells' - loongson,parent_int_map From 5f346a6e5970229c19c059e8fa62c3dbdde56e7b Mon Sep 17 00:00:00 2001 From: Binbin Zhou Date: Wed, 17 Jan 2024 12:43:00 +0800 Subject: [PATCH 08/22] LoongArch: Allow device trees be built into the kernel During the upstream progress of those DT-based drivers, DT properties are changed a lot so very different from those in existing bootloaders. It is inevitably that some existing systems do not provide a standard, canonical device tree to the kernel at boot time. So let's provide a device tree table in the kernel, keyed by the dts filename, containing the relevant DTBs. We can use the built-in dts files as references. Each SoC has only one built-in dts file which describes all possible device information of that SoC, so the dts files are good examples during development. And as a reference, our built-in dts file only enables the most basic bootable combinations (so it is generic enough), acts as an alternative in case the dts in the bootloader is unexpected. Signed-off-by: Binbin Zhou Signed-off-by: Huacai Chen --- arch/loongarch/Kbuild | 1 + arch/loongarch/Kconfig | 18 ++++++++++++++++++ arch/loongarch/Makefile | 3 ++- arch/loongarch/boot/dts/Makefile | 3 +-- arch/loongarch/kernel/setup.c | 12 +++++++++--- 5 files changed, 31 insertions(+), 6 deletions(-) diff --git a/arch/loongarch/Kbuild b/arch/loongarch/Kbuild index beb8499dd8ed..bfa21465d83a 100644 --- a/arch/loongarch/Kbuild +++ b/arch/loongarch/Kbuild @@ -4,6 +4,7 @@ obj-y += net/ obj-y += vdso/ obj-$(CONFIG_KVM) += kvm/ +obj-$(CONFIG_BUILTIN_DTB) += boot/dts/ # for cleaning subdir- += boot diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig index 6b9da3effdf8..ede2ef26726a 100644 --- a/arch/loongarch/Kconfig +++ b/arch/loongarch/Kconfig @@ -375,6 +375,24 @@ config CMDLINE_FORCE endchoice +config BUILTIN_DTB + bool "Enable built-in dtb in kernel" + depends on OF + help + Some existing systems do not provide a canonical device tree to + the kernel at boot time. Let's provide a device tree table in the + kernel, keyed by the dts filename, containing the relevant DTBs. + + Built-in DTBs are generic enough and can be used as references. + +config BUILTIN_DTB_NAME + string "Source file for built-in dtb" + depends on BUILTIN_DTB + help + Base name (without suffix, relative to arch/loongarch/boot/dts/) + for the DTS file that will be used to produce the DTB linked into + the kernel. + config DMI bool "Enable DMI scanning" select DMI_SCAN_MACHINE_NON_EFI_FALLBACK diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile index ba45cb7b621c..983aa2b1629a 100644 --- a/arch/loongarch/Makefile +++ b/arch/loongarch/Makefile @@ -6,6 +6,7 @@ boot := arch/loongarch/boot KBUILD_DEFCONFIG := loongson3_defconfig +KBUILD_DTBS := dtbs image-name-y := vmlinux image-name-$(CONFIG_EFI_ZBOOT) := vmlinuz @@ -144,7 +145,7 @@ endif vdso-install-y += arch/loongarch/vdso/vdso.so.dbg -all: $(notdir $(KBUILD_IMAGE)) +all: $(notdir $(KBUILD_IMAGE)) $(KBUILD_DTBS) vmlinuz.efi: vmlinux.efi diff --git a/arch/loongarch/boot/dts/Makefile b/arch/loongarch/boot/dts/Makefile index 5f1f55e911ad..1e24cdb5180a 100644 --- a/arch/loongarch/boot/dts/Makefile +++ b/arch/loongarch/boot/dts/Makefile @@ -1,4 +1,3 @@ # SPDX-License-Identifier: GPL-2.0-only -dtstree := $(srctree)/$(src) -dtb-y := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) +obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .dtb.o, $(CONFIG_BUILTIN_DTB_NAME)) diff --git a/arch/loongarch/kernel/setup.c b/arch/loongarch/kernel/setup.c index d183a745fb85..15d366b8407c 100644 --- a/arch/loongarch/kernel/setup.c +++ b/arch/loongarch/kernel/setup.c @@ -295,8 +295,12 @@ static void __init fdt_setup(void) if (acpi_os_get_root_pointer()) return; - /* Look for a device tree configuration table entry */ - fdt_pointer = efi_fdt_pointer(); + /* Prefer to use built-in dtb, checking its legality first. */ + if (!fdt_check_header(__dtb_start)) + fdt_pointer = __dtb_start; + else + fdt_pointer = efi_fdt_pointer(); /* Fallback to firmware dtb */ + if (!fdt_pointer || fdt_check_header(fdt_pointer)) return; @@ -330,7 +334,9 @@ static void __init bootcmdline_init(char **cmdline_p) if (boot_command_line[0]) strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); - strlcat(boot_command_line, init_command_line, COMMAND_LINE_SIZE); + if (!strstr(boot_command_line, init_command_line)) + strlcat(boot_command_line, init_command_line, COMMAND_LINE_SIZE); + goto out; } #endif From 0f66569c85948c8b3c3edbe3e4ada6f98a4937ea Mon Sep 17 00:00:00 2001 From: Binbin Zhou Date: Wed, 17 Jan 2024 12:43:07 +0800 Subject: [PATCH 09/22] LoongArch: dts: DeviceTree for Loongson-2K0500 Add DeviceTree file for Loongson-2K0500 processor, which integrates one 64-bit 2-issue superscalar LA264 processor core. Signed-off-by: Binbin Zhou Signed-off-by: Huacai Chen --- arch/loongarch/boot/dts/Makefile | 2 + .../boot/dts/loongson-2k0500-ref.dts | 88 ++++++ arch/loongarch/boot/dts/loongson-2k0500.dtsi | 266 ++++++++++++++++++ 3 files changed, 356 insertions(+) create mode 100644 arch/loongarch/boot/dts/loongson-2k0500-ref.dts create mode 100644 arch/loongarch/boot/dts/loongson-2k0500.dtsi diff --git a/arch/loongarch/boot/dts/Makefile b/arch/loongarch/boot/dts/Makefile index 1e24cdb5180a..89c9758bba7f 100644 --- a/arch/loongarch/boot/dts/Makefile +++ b/arch/loongarch/boot/dts/Makefile @@ -1,3 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only +dtb-y = loongson-2k0500-ref.dtb + obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .dtb.o, $(CONFIG_BUILTIN_DTB_NAME)) diff --git a/arch/loongarch/boot/dts/loongson-2k0500-ref.dts b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts new file mode 100644 index 000000000000..b38071a4d0b0 --- /dev/null +++ b/arch/loongarch/boot/dts/loongson-2k0500-ref.dts @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +/dts-v1/; + +#include "loongson-2k0500.dtsi" + +/ { + compatible = "loongson,ls2k0500-ref", "loongson,ls2k0500"; + model = "Loongson-2K0500 Reference Board"; + + aliases { + ethernet0 = &gmac0; + ethernet1 = &gmac1; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@200000 { + device_type = "memory"; + reg = <0x0 0x00200000 0x0 0x0ee00000>, + <0x0 0x90000000 0x0 0x60000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x2000000>; + linux,cma-default; + }; + }; +}; + +&gmac0 { + status = "okay"; + + phy-mode = "rgmii"; + bus_id = <0x0>; +}; + +&gmac1 { + status = "okay"; + + phy-mode = "rgmii"; + bus_id = <0x1>; +}; + +&i2c0 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + eeprom@57{ + compatible = "atmel,24c16"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&rtc0 { + status = "okay"; +}; diff --git a/arch/loongarch/boot/dts/loongson-2k0500.dtsi b/arch/loongarch/boot/dts/loongson-2k0500.dtsi new file mode 100644 index 000000000000..444779c21034 --- /dev/null +++ b/arch/loongarch/boot/dts/loongson-2k0500.dtsi @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +/dts-v1/; + +#include + +/ { + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "loongson,la264"; + device_type = "cpu"; + reg = <0x0>; + clocks = <&cpu_clk>; + }; + }; + + cpu_clk: cpu-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <500000000>; + }; + + cpuintc: interrupt-controller { + compatible = "loongson,cpu-interrupt-controller"; + #interrupt-cells = <1>; + interrupt-controller; + }; + + bus@10000000 { + compatible = "simple-bus"; + ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>, + <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>, + <0x0 0x20000000 0x0 0x20000000 0x0 0x10000000>, + <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>, + <0xfe 0x0 0xfe 0x0 0x0 0x40000000>; + #address-cells = <2>; + #size-cells = <2>; + + isa@16400000 { + compatible = "isa"; + #size-cells = <1>; + #address-cells = <2>; + ranges = <1 0x0 0x0 0x16400000 0x4000>; + }; + + liointc0: interrupt-controller@1fe11400 { + compatible = "loongson,liointc-2.0"; + reg = <0x0 0x1fe11400 0x0 0x40>, + <0x0 0x1fe11040 0x0 0x8>; + reg-names = "main", "isr0"; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&cpuintc>; + interrupts = <2>; + interrupt-names = "int0"; + + loongson,parent_int_map = <0xffffffff>, /* int0 */ + <0x00000000>, /* int1 */ + <0x00000000>, /* int2 */ + <0x00000000>; /* int3 */ + }; + + liointc1: interrupt-controller@1fe11440 { + compatible = "loongson,liointc-2.0"; + reg = <0x0 0x1fe11440 0x0 0x40>, + <0x0 0x1fe11048 0x0 0x8>; + reg-names = "main", "isr0"; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&cpuintc>; + interrupts = <4>; + interrupt-names = "int2"; + + loongson,parent_int_map = <0x00000000>, /* int0 */ + <0x00000000>, /* int1 */ + <0xffffffff>, /* int2 */ + <0x00000000>; /* int3 */ + }; + + eiointc: interrupt-controller@1fe11600 { + compatible = "loongson,ls2k0500-eiointc"; + reg = <0x0 0x1fe11600 0x0 0xea00>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&cpuintc>; + interrupts = <3>; + }; + + gmac0: ethernet@1f020000 { + compatible = "snps,dwmac-3.70a"; + reg = <0x0 0x1f020000 0x0 0x10000>; + interrupt-parent = <&liointc0>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + status = "disabled"; + }; + + gmac1: ethernet@1f030000 { + compatible = "snps,dwmac-3.70a"; + reg = <0x0 0x1f030000 0x0 0x10000>; + interrupt-parent = <&liointc0>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + status = "disabled"; + }; + + sata: sata@1f040000 { + compatible = "snps,spear-ahci"; + reg = <0x0 0x1f040000 0x0 0x10000>; + interrupt-parent = <&eiointc>; + interrupts = <75>; + status = "disabled"; + }; + + ehci0: usb@1f050000 { + compatible = "generic-ehci"; + reg = <0x0 0x1f050000 0x0 0x8000>; + interrupt-parent = <&eiointc>; + interrupts = <71>; + status = "disabled"; + }; + + ohci0: usb@1f058000 { + compatible = "generic-ohci"; + reg = <0x0 0x1f058000 0x0 0x8000>; + interrupt-parent = <&eiointc>; + interrupts = <72>; + status = "disabled"; + }; + + uart0: serial@1ff40800 { + compatible = "ns16550a"; + reg = <0x0 0x1ff40800 0x0 0x10>; + clock-frequency = <100000000>; + interrupt-parent = <&eiointc>; + interrupts = <2>; + no-loopback-test; + status = "disabled"; + }; + + i2c0: i2c@1ff48000 { + compatible = "loongson,ls2k-i2c"; + reg = <0x0 0x1ff48000 0x0 0x0800>; + interrupt-parent = <&eiointc>; + interrupts = <14>; + status = "disabled"; + }; + + i2c@1ff48800 { + compatible = "loongson,ls2k-i2c"; + reg = <0x0 0x1ff48800 0x0 0x0800>; + interrupt-parent = <&eiointc>; + interrupts = <15>; + status = "disabled"; + }; + + i2c@1ff49000 { + compatible = "loongson,ls2k-i2c"; + reg = <0x0 0x1ff49000 0x0 0x0800>; + interrupt-parent = <&eiointc>; + interrupts = <16>; + status = "disabled"; + }; + + i2c@1ff49800 { + compatible = "loongson,ls2k-i2c"; + reg = <0x0 0x1ff49800 0x0 0x0800>; + interrupt-parent = <&eiointc>; + interrupts = <17>; + status = "disabled"; + }; + + i2c@1ff4a000 { + compatible = "loongson,ls2k-i2c"; + reg = <0x0 0x1ff4a000 0x0 0x0800>; + interrupt-parent = <&eiointc>; + interrupts = <18>; + status = "disabled"; + }; + + i2c@1ff4a800 { + compatible = "loongson,ls2k-i2c"; + reg = <0x0 0x1ff4a800 0x0 0x0800>; + interrupt-parent = <&eiointc>; + interrupts = <19>; + status = "disabled"; + }; + + pmc: power-management@1ff6c000 { + compatible = "loongson,ls2k0500-pmc", "syscon"; + reg = <0x0 0x1ff6c000 0x0 0x58>; + interrupt-parent = <&eiointc>; + interrupts = <56>; + loongson,suspend-address = <0x0 0x1c000500>; + + syscon-reboot { + compatible = "syscon-reboot"; + offset = <0x30>; + mask = <0x1>; + }; + + syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmc>; + offset = <0x14>; + mask = <0x3c00>; + value = <0x3c00>; + }; + }; + + rtc0: rtc@1ff6c100 { + compatible = "loongson,ls2k0500-rtc", "loongson,ls7a-rtc"; + reg = <0x0 0x1ff6c100 0x0 0x100>; + interrupt-parent = <&eiointc>; + interrupts = <35>; + status = "disabled"; + }; + + pcie@1a000000 { + compatible = "loongson,ls2k-pci"; + reg = <0x0 0x1a000000 0x0 0x02000000>, + <0xfe 0x0 0x0 0x20000000>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x0 0x5>; + ranges = <0x01000000 0x0 0x00004000 0x0 0x16404000 0x0 0x00004000>, + <0x02000000 0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>; + + pcie@0,0 { + reg = <0x0000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&eiointc>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &eiointc 81>; + ranges; + }; + + pcie@1,0 { + reg = <0x0800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&eiointc>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &eiointc 82>; + ranges; + }; + }; + }; +}; From 30a5532a32066233a2e9a4751989276e91c82210 Mon Sep 17 00:00:00 2001 From: Binbin Zhou Date: Wed, 17 Jan 2024 12:43:08 +0800 Subject: [PATCH 10/22] LoongArch: dts: DeviceTree for Loongson-2K1000 Add DeviceTree file for Loongson-2K1000 processor, which integrates two 64-bit 2-issue superscalar LA264 processor cores. Signed-off-by: Binbin Zhou Signed-off-by: Huacai Chen --- arch/loongarch/boot/dts/Makefile | 2 +- .../boot/dts/loongson-2k1000-ref.dts | 183 +++++++ arch/loongarch/boot/dts/loongson-2k1000.dtsi | 492 ++++++++++++++++++ 3 files changed, 676 insertions(+), 1 deletion(-) create mode 100644 arch/loongarch/boot/dts/loongson-2k1000-ref.dts create mode 100644 arch/loongarch/boot/dts/loongson-2k1000.dtsi diff --git a/arch/loongarch/boot/dts/Makefile b/arch/loongarch/boot/dts/Makefile index 89c9758bba7f..cfb0a122d91c 100644 --- a/arch/loongarch/boot/dts/Makefile +++ b/arch/loongarch/boot/dts/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only -dtb-y = loongson-2k0500-ref.dtb +dtb-y = loongson-2k0500-ref.dtb loongson-2k1000-ref.dtb obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .dtb.o, $(CONFIG_BUILTIN_DTB_NAME)) diff --git a/arch/loongarch/boot/dts/loongson-2k1000-ref.dts b/arch/loongarch/boot/dts/loongson-2k1000-ref.dts new file mode 100644 index 000000000000..132a2d1ea8bc --- /dev/null +++ b/arch/loongarch/boot/dts/loongson-2k1000-ref.dts @@ -0,0 +1,183 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +/dts-v1/; + +#include "loongson-2k1000.dtsi" + +/ { + compatible = "loongson,ls2k1000-ref", "loongson,ls2k1000"; + model = "Loongson-2K1000 Reference Board"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@200000 { + device_type = "memory"; + reg = <0x0 0x00200000 0x0 0x06e00000>, + <0x0 0x08000000 0x0 0x07000000>, + <0x0 0x90000000 0x1 0xe0000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x2000000>; + linux,cma-default; + }; + }; +}; + +&gmac0 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <&phy0>; + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + +&gmac1 { + status = "okay"; + + phy-mode = "rgmii"; + phy-handle = <&phy1>; + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + phy1: ethernet-phy@1 { + reg = <16>; + }; + }; +}; + +&i2c2 { + status = "okay"; + + pinctrl-0 = <&i2c0_pins_default>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + eeprom@57{ + compatible = "atmel,24c16"; + reg = <0x57>; + pagesize = <16>; + }; +}; + +&spi0 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + spidev@0 { + compatible = "rohm,dh2228fv"; + spi-max-frequency = <100000000>; + reg = <0>; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&clk { + status = "okay"; +}; + +&rtc0 { + status = "okay"; +}; + +&pctrl { + status = "okay"; + + sdio_pins_default: sdio-pins { + sdio-pinmux { + groups = "sdio"; + function = "sdio"; + }; + sdio-det-pinmux { + groups = "pwm2"; + function = "gpio"; + }; + }; + + pwm1_pins_default: pwm1-pins { + pinmux { + groups = "pwm1"; + function = "pwm1"; + }; + }; + + pwm0_pins_default: pwm0-pins { + pinmux { + groups = "pwm0"; + function = "pwm0"; + }; + }; + + i2c1_pins_default: i2c1-pins { + pinmux { + groups = "i2c1"; + function = "i2c1"; + }; + }; + + i2c0_pins_default: i2c0-pins { + pinmux { + groups = "i2c0"; + function = "i2c0"; + }; + }; + + nand_pins_default: nand-pins { + pinmux { + groups = "nand"; + function = "nand"; + }; + }; + + hda_pins_default: hda-pins { + grp0-pinmux { + groups = "hda"; + function = "hda"; + }; + grp1-pinmux { + groups = "i2s"; + function = "gpio"; + }; + }; +}; diff --git a/arch/loongarch/boot/dts/loongson-2k1000.dtsi b/arch/loongarch/boot/dts/loongson-2k1000.dtsi new file mode 100644 index 000000000000..49a70f8c3cab --- /dev/null +++ b/arch/loongarch/boot/dts/loongson-2k1000.dtsi @@ -0,0 +1,492 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +/dts-v1/; + +#include +#include +#include + +/ { + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "loongson,la264"; + device_type = "cpu"; + reg= <0x0>; + clocks = <&clk LOONGSON2_NODE_CLK>; + }; + + cpu1: cpu@1 { + compatible = "loongson,la264"; + device_type = "cpu"; + reg = <0x1>; + clocks = <&clk LOONGSON2_NODE_CLK>; + }; + }; + + ref_100m: clock-ref-100m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "ref_100m"; + }; + + cpuintc: interrupt-controller { + compatible = "loongson,cpu-interrupt-controller"; + #interrupt-cells = <1>; + interrupt-controller; + }; + + /* i2c of the dvi eeprom edid */ + i2c-gpio-0 { + compatible = "i2c-gpio"; + scl-gpios = <&gpio0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <5>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + /* i2c of the eeprom edid */ + i2c-gpio-1 { + compatible = "i2c-gpio"; + scl-gpios = <&gpio0 33 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio0 32 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <5>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tsensor 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <33000>; + hysteresis = <2000>; + type = "active"; + }; + + cpu_crit: cpu-crit { + temperature = <85000>; + hysteresis = <5000>; + type = "critical"; + }; + }; + }; + }; + + bus@10000000 { + compatible = "simple-bus"; + ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>, + <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>, + <0x0 0x20000000 0x0 0x20000000 0x0 0x10000000>, + <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>, + <0xfe 0x0 0xfe 0x0 0x0 0x40000000>; + #address-cells = <2>; + #size-cells = <2>; + dma-coherent; + + liointc0: interrupt-controller@1fe01400 { + compatible = "loongson,liointc-2.0"; + reg = <0x0 0x1fe01400 0x0 0x40>, + <0x0 0x1fe01040 0x0 0x8>, + <0x0 0x1fe01140 0x0 0x8>; + reg-names = "main", "isr0", "isr1"; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&cpuintc>; + interrupts = <2>; + interrupt-names = "int0"; + loongson,parent_int_map = <0xffffffff>, /* int0 */ + <0x00000000>, /* int1 */ + <0x00000000>, /* int2 */ + <0x00000000>; /* int3 */ + }; + + liointc1: interrupt-controller@1fe01440 { + compatible = "loongson,liointc-2.0"; + reg = <0x0 0x1fe01440 0x0 0x40>, + <0x0 0x1fe01048 0x0 0x8>, + <0x0 0x1fe01148 0x0 0x8>; + reg-names = "main", "isr0", "isr1"; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&cpuintc>; + interrupts = <3>; + interrupt-names = "int1"; + loongson,parent_int_map = <0x00000000>, /* int0 */ + <0xffffffff>, /* int1 */ + <0x00000000>, /* int2 */ + <0x00000000>; /* int3 */ + }; + + chipid@1fe00000 { + compatible = "loongson,ls2k-chipid"; + reg = <0x0 0x1fe00000 0x0 0x30>; + little-endian; + }; + + pctrl: pinctrl@1fe00420 { + compatible = "loongson,ls2k-pinctrl"; + reg = <0x0 0x1fe00420 0x0 0x18>; + status = "disabled"; + }; + + clk: clock-controller@1fe00480 { + compatible = "loongson,ls2k-clk"; + reg = <0x0 0x1fe00480 0x0 0x58>; + #clock-cells = <1>; + clocks = <&ref_100m>; + clock-names = "ref_100m"; + status = "disabled"; + }; + + gpio0: gpio@1fe00500 { + compatible = "loongson,ls2k-gpio"; + reg = <0x0 0x1fe00500 0x0 0x38>; + ngpios = <64>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pctrl 0x0 0x0 15>, + <&pctrl 16 16 15>, + <&pctrl 32 32 10>, + <&pctrl 44 44 20>; + interrupt-parent = <&liointc1>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>, + <29 IRQ_TYPE_LEVEL_HIGH>, + <30 IRQ_TYPE_LEVEL_HIGH>, + <30 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <>, + <>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>, + <27 IRQ_TYPE_LEVEL_HIGH>; + }; + + tsensor: thermal-sensor@1fe01500 { + compatible = "loongson,ls2k1000-thermal"; + reg = <0x0 0x1fe01500 0x0 0x30>; + interrupt-parent = <&liointc0>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <1>; + }; + + dma-controller@1fe00c00 { + compatible = "loongson,ls2k1000-apbdma"; + reg = <0x0 0x1fe00c00 0x0 0x8>; + interrupt-parent = <&liointc1>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LOONGSON2_APB_CLK>; + #dma-cells = <1>; + status = "disabled"; + }; + + dma-controller@1fe00c10 { + compatible = "loongson,ls2k1000-apbdma"; + reg = <0x0 0x1fe00c10 0x0 0x8>; + interrupt-parent = <&liointc1>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LOONGSON2_APB_CLK>; + #dma-cells = <1>; + status = "disabled"; + }; + + dma-controller@1fe00c20 { + compatible = "loongson,ls2k1000-apbdma"; + reg = <0x0 0x1fe00c20 0x0 0x8>; + interrupt-parent = <&liointc1>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LOONGSON2_APB_CLK>; + #dma-cells = <1>; + status = "disabled"; + }; + + dma-controller@1fe00c30 { + compatible = "loongson,ls2k1000-apbdma"; + reg = <0x0 0x1fe00c30 0x0 0x8>; + interrupt-parent = <&liointc1>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LOONGSON2_APB_CLK>; + #dma-cells = <1>; + status = "disabled"; + }; + + dma-controller@1fe00c40 { + compatible = "loongson,ls2k1000-apbdma"; + reg = <0x0 0x1fe00c40 0x0 0x8>; + interrupt-parent = <&liointc1>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LOONGSON2_APB_CLK>; + #dma-cells = <1>; + status = "disabled"; + }; + + uart0: serial@1fe20000 { + compatible = "ns16550a"; + reg = <0x0 0x1fe20000 0x0 0x10>; + clock-frequency = <125000000>; + interrupt-parent = <&liointc0>; + interrupts = <0x0 IRQ_TYPE_LEVEL_HIGH>; + no-loopback-test; + status = "disabled"; + }; + + i2c2: i2c@1fe21000 { + compatible = "loongson,ls2k-i2c"; + reg = <0x0 0x1fe21000 0x0 0x8>; + interrupt-parent = <&liointc0>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c3: i2c@1fe21800 { + compatible = "loongson,ls2k-i2c"; + reg = <0x0 0x1fe21800 0x0 0x8>; + interrupt-parent = <&liointc0>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pmc: power-management@1fe27000 { + compatible = "loongson,ls2k1000-pmc", "loongson,ls2k0500-pmc", "syscon"; + reg = <0x0 0x1fe27000 0x0 0x58>; + interrupt-parent = <&liointc1>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + loongson,suspend-address = <0x0 0x1c000500>; + + syscon-reboot { + compatible = "syscon-reboot"; + offset = <0x30>; + mask = <0x1>; + }; + + syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmc>; + offset = <0x14>; + mask = <0x3c00>; + value = <0x3c00>; + }; + }; + + rtc0: rtc@1fe27800 { + compatible = "loongson,ls2k1000-rtc"; + reg = <0x0 0x1fe27800 0x0 0x100>; + interrupt-parent = <&liointc1>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + spi0: spi@1fff0220 { + compatible = "loongson,ls2k1000-spi"; + reg = <0x0 0x1fff0220 0x0 0x10>; + clocks = <&clk LOONGSON2_BOOT_CLK>; + status = "disabled"; + }; + + pcie@1a000000 { + compatible = "loongson,ls2k-pci"; + reg = <0x0 0x1a000000 0x0 0x02000000>, + <0xfe 0x0 0x0 0x20000000>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x0 0xff>; + ranges = <0x01000000 0x0 0x00008000 0x0 0x18008000 0x0 0x00008000>, + <0x02000000 0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>; + + gmac0: ethernet@3,0 { + reg = <0x1800 0x0 0x0 0x0 0x0>; + interrupt-parent = <&liointc0>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>, + <13 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_lpi"; + status = "disabled"; + }; + + gmac1: ethernet@3,1 { + reg = <0x1900 0x0 0x0 0x0 0x0>; + interrupt-parent = <&liointc0>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>, + <15 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_lpi"; + status = "disabled"; + }; + + ehci0: usb@4,1 { + reg = <0x2100 0x0 0x0 0x0 0x0>; + interrupt-parent = <&liointc1>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + ohci0: usb@4,2 { + reg = <0x2200 0x0 0x0 0x0 0x0>; + interrupt-parent = <&liointc1>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + display@6,0 { + reg = <0x3000 0x0 0x0 0x0 0x0>; + interrupt-parent = <&liointc0>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + hda@7,0 { + reg = <0x3800 0x0 0x0 0x0 0x0>; + interrupt-parent = <&liointc0>; + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sata: sata@8,0 { + reg = <0x4000 0x0 0x0 0x0 0x0>; + interrupt-parent = <&liointc0>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + pcie@9,0 { + reg = <0x4800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 0x0 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@a,0 { + reg = <0x5000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&liointc1>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 1 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@b,0 { + reg = <0x5800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&liointc1>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 2 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@c,0 { + reg = <0x6000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&liointc1>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 3 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@d,0 { + reg = <0x6800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&liointc1>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 4 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@e,0 { + reg = <0x7000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&liointc1>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &liointc1 5 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + }; + }; +}; From 2905844f682808275ea5daf6f5b668fbfe547363 Mon Sep 17 00:00:00 2001 From: Binbin Zhou Date: Wed, 17 Jan 2024 12:43:08 +0800 Subject: [PATCH 11/22] LoongArch: dts: DeviceTree for Loongson-2K2000 Add DeviceTree file for Loongson-2K2000 processor, which integrates two 64-bit 3-issue superscalar LA364 processor cores. Signed-off-by: Binbin Zhou Signed-off-by: Huacai Chen --- arch/loongarch/boot/dts/Makefile | 2 +- .../boot/dts/loongson-2k2000-ref.dts | 72 +++++ arch/loongarch/boot/dts/loongson-2k2000.dtsi | 300 ++++++++++++++++++ 3 files changed, 373 insertions(+), 1 deletion(-) create mode 100644 arch/loongarch/boot/dts/loongson-2k2000-ref.dts create mode 100644 arch/loongarch/boot/dts/loongson-2k2000.dtsi diff --git a/arch/loongarch/boot/dts/Makefile b/arch/loongarch/boot/dts/Makefile index cfb0a122d91c..747d0c3f6389 100644 --- a/arch/loongarch/boot/dts/Makefile +++ b/arch/loongarch/boot/dts/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only -dtb-y = loongson-2k0500-ref.dtb loongson-2k1000-ref.dtb +dtb-y = loongson-2k0500-ref.dtb loongson-2k1000-ref.dtb loongson-2k2000-ref.dtb obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .dtb.o, $(CONFIG_BUILTIN_DTB_NAME)) diff --git a/arch/loongarch/boot/dts/loongson-2k2000-ref.dts b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts new file mode 100644 index 000000000000..dca91caf895e --- /dev/null +++ b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts @@ -0,0 +1,72 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +/dts-v1/; + +#include "loongson-2k2000.dtsi" + +/ { + compatible = "loongson,ls2k2000-ref", "loongson,ls2k2000"; + model = "Loongson-2K2000 Reference Board"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@200000 { + device_type = "memory"; + reg = <0x0 0x00200000 0x0 0x0ee00000>, + <0x0 0x90000000 0x0 0x70000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0x2000000>; + linux,cma-default; + }; + }; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&rtc0 { + status = "okay"; +}; + +&xhci0 { + status = "okay"; +}; + +&xhci1 { + status = "okay"; +}; + +&gmac0 { + status = "okay"; +}; + +&gmac1 { + status = "okay"; +}; + +&gmac2 { + status = "okay"; +}; diff --git a/arch/loongarch/boot/dts/loongson-2k2000.dtsi b/arch/loongarch/boot/dts/loongson-2k2000.dtsi new file mode 100644 index 000000000000..a231949b5f55 --- /dev/null +++ b/arch/loongarch/boot/dts/loongson-2k2000.dtsi @@ -0,0 +1,300 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +/dts-v1/; + +#include + +/ { + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@1 { + compatible = "loongson,la364"; + device_type = "cpu"; + reg = <0x0>; + clocks = <&cpu_clk>; + }; + + cpu1: cpu@2 { + compatible = "loongson,la364"; + device_type = "cpu"; + reg = <0x1>; + clocks = <&cpu_clk>; + }; + }; + + cpu_clk: cpu-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1400000000>; + }; + + cpuintc: interrupt-controller { + compatible = "loongson,cpu-interrupt-controller"; + #interrupt-cells = <1>; + interrupt-controller; + }; + + bus@10000000 { + compatible = "simple-bus"; + ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>, + <0x0 0x02000000 0x0 0x02000000 0x0 0x02000000>, + <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>, + <0xfe 0x0 0xfe 0x0 0x0 0x40000000>; + #address-cells = <2>; + #size-cells = <2>; + + pmc: power-management@100d0000 { + compatible = "loongson,ls2k2000-pmc", "loongson,ls2k0500-pmc", "syscon"; + reg = <0x0 0x100d0000 0x0 0x58>; + interrupt-parent = <&eiointc>; + interrupts = <47>; + loongson,suspend-address = <0x0 0x1c000500>; + + syscon-reboot { + compatible = "syscon-reboot"; + offset = <0x30>; + mask = <0x1>; + }; + + syscon-poweroff { + compatible = "syscon-poweroff"; + regmap = <&pmc>; + offset = <0x14>; + mask = <0x3c00>; + value = <0x3c00>; + }; + }; + + liointc: interrupt-controller@1fe01400 { + compatible = "loongson,liointc-1.0"; + reg = <0x0 0x1fe01400 0x0 0x64>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&cpuintc>; + interrupts = <2>; + interrupt-names = "int0"; + loongson,parent_int_map = <0xffffffff>, /* int0 */ + <0x00000000>, /* int1 */ + <0x00000000>, /* int2 */ + <0x00000000>; /* int3 */ + }; + + eiointc: interrupt-controller@1fe01600 { + compatible = "loongson,ls2k2000-eiointc"; + reg = <0x0 0x1fe01600 0x0 0xea00>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&cpuintc>; + interrupts = <3>; + }; + + pic: interrupt-controller@10000000 { + compatible = "loongson,pch-pic-1.0"; + reg = <0x0 0x10000000 0x0 0x400>; + interrupt-controller; + #interrupt-cells = <2>; + loongson,pic-base-vec = <0>; + interrupt-parent = <&eiointc>; + }; + + msi: msi-controller@1fe01140 { + compatible = "loongson,pch-msi-1.0"; + reg = <0x0 0x1fe01140 0x0 0x8>; + msi-controller; + loongson,msi-base-vec = <64>; + loongson,msi-num-vecs = <192>; + interrupt-parent = <&eiointc>; + }; + + rtc0: rtc@100d0100 { + compatible = "loongson,ls2k2000-rtc", "loongson,ls7a-rtc"; + reg = <0x0 0x100d0100 0x0 0x100>; + interrupt-parent = <&pic>; + interrupts = <52 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart0: serial@1fe001e0 { + compatible = "ns16550a"; + reg = <0x0 0x1fe001e0 0x0 0x10>; + clock-frequency = <100000000>; + interrupt-parent = <&liointc>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + no-loopback-test; + status = "disabled"; + }; + + pcie@1a000000 { + compatible = "loongson,ls2k-pci"; + reg = <0x0 0x1a000000 0x0 0x02000000>, + <0xfe 0x0 0x0 0x20000000>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x0 0xff>; + ranges = <0x01000000 0x0 0x00008000 0x0 0x18400000 0x0 0x00008000>, + <0x02000000 0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>; + + gmac0: ethernet@3,0 { + reg = <0x1800 0x0 0x0 0x0 0x0>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + gmac1: ethernet@3,1 { + reg = <0x1900 0x0 0x0 0x0 0x0>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + gmac2: ethernet@3,2 { + reg = <0x1a00 0x0 0x0 0x0 0x0>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + xhci0: usb@4,0 { + reg = <0x2000 0x0 0x0 0x0 0x0>; + interrupts = <48 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + xhci1: usb@19,0 { + reg = <0xc800 0x0 0x0 0x0 0x0>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + display@6,1 { + reg = <0x3100 0x0 0x0 0x0 0x0>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + hda@7,0 { + reg = <0x3800 0x0 0x0 0x0 0x0>; + interrupts = <58 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + sata: sata@8,0 { + reg = <0x4000 0x0 0x0 0x0 0x0>; + interrupts = <16 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&pic>; + status = "disabled"; + }; + + pcie@9,0 { + reg = <0x4800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 32 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@a,0 { + reg = <0x5000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 33 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@b,0 { + reg = <0x5800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 34 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@c,0 { + reg = <0x6000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 35 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@d,0 { + reg = <0x6800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 36 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@e,0 { + reg = <0x7000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 37 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@f,0 { + reg = <0x7800 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 40 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + + pcie@10,0 { + reg = <0x8000 0x0 0x0 0x0 0x0>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + interrupt-parent = <&pic>; + #interrupt-cells = <1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &pic 30 IRQ_TYPE_LEVEL_HIGH>; + ranges; + }; + }; + }; +}; From 44a01f1f726ab1d2050fb741eca4fabfa3cab799 Mon Sep 17 00:00:00 2001 From: Binbin Zhou Date: Wed, 17 Jan 2024 12:43:08 +0800 Subject: [PATCH 12/22] LoongArch: Parsing CPU-related information from DTS Generally, we can get cpu-related information, such as model name, from /proc/cpuinfo. For FDT-based systems, we need to parse the relevant information from DTS. BTW, set loongson_sysconf.cores_per_package to num_processors if SMBIOS doesn't provide a valid number (usually FDT-based systems). Signed-off-by: Binbin Zhou Signed-off-by: Hongliang Wang Signed-off-by: Huacai Chen --- arch/loongarch/kernel/env.c | 34 +++++++++++++++++++++++++++++++++- arch/loongarch/kernel/smp.c | 3 +++ 2 files changed, 36 insertions(+), 1 deletion(-) diff --git a/arch/loongarch/kernel/env.c b/arch/loongarch/kernel/env.c index 6b3bfb0092e6..2f1f5b08638f 100644 --- a/arch/loongarch/kernel/env.c +++ b/arch/loongarch/kernel/env.c @@ -5,13 +5,16 @@ * Copyright (C) 2020-2022 Loongson Technology Corporation Limited */ #include +#include #include #include #include +#include #include #include #include #include +#include u64 efi_system_table; struct loongson_system_configuration loongson_sysconf; @@ -36,7 +39,16 @@ void __init init_environ(void) static int __init init_cpu_fullname(void) { - int cpu; + struct device_node *root; + int cpu, ret; + char *model; + + /* Parsing cpuname from DTS model property */ + root = of_find_node_by_path("/"); + ret = of_property_read_string(root, "model", (const char **)&model); + of_node_put(root); + if (ret == 0) + loongson_sysconf.cpuname = strsep(&model, " "); if (loongson_sysconf.cpuname && !strncmp(loongson_sysconf.cpuname, "Loongson", 8)) { for (cpu = 0; cpu < NR_CPUS; cpu++) @@ -46,6 +58,26 @@ static int __init init_cpu_fullname(void) } arch_initcall(init_cpu_fullname); +static int __init fdt_cpu_clk_init(void) +{ + struct clk *clk; + struct device_node *np; + + np = of_get_cpu_node(0, NULL); + if (!np) + return -ENODEV; + + clk = of_clk_get(np, 0); + if (IS_ERR(clk)) + return -ENODEV; + + cpu_clock_freq = clk_get_rate(clk); + clk_put(clk); + + return 0; +} +late_initcall(fdt_cpu_clk_init); + static ssize_t boardinfo_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) { diff --git a/arch/loongarch/kernel/smp.c b/arch/loongarch/kernel/smp.c index 5bca12d16e06..9e33b5e36122 100644 --- a/arch/loongarch/kernel/smp.c +++ b/arch/loongarch/kernel/smp.c @@ -216,6 +216,9 @@ void __init loongson_smp_setup(void) { fdt_smp_setup(); + if (loongson_sysconf.cores_per_package == 0) + loongson_sysconf.cores_per_package = num_processors; + cpu_data[0].core = cpu_logical_map(0) % loongson_sysconf.cores_per_package; cpu_data[0].package = cpu_logical_map(0) / loongson_sysconf.cores_per_package; From 9499daeade0edcbd3d5d20ffdd642a8e3a194b1f Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Wed, 17 Jan 2024 12:43:08 +0800 Subject: [PATCH 13/22] LoongArch: Add a missing call to efi_esrt_init() ESRT (EFI System Resource Table) is needed for UEFI's "Capsule Update" feature. But ESRT initialization is missing on LoongArch now, so add a call to efi_esrt_init() at the end of efi_init(). Signed-off-by: Huacai Chen --- arch/loongarch/kernel/efi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/loongarch/kernel/efi.c b/arch/loongarch/kernel/efi.c index acb5d3385675..000825406c1f 100644 --- a/arch/loongarch/kernel/efi.c +++ b/arch/loongarch/kernel/efi.c @@ -140,4 +140,6 @@ void __init efi_init(void) early_memunmap(tbl, sizeof(*tbl)); } + + efi_esrt_init(); } From d23b77953f5a4fbf94c05157b186aac2a247ae32 Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Wed, 17 Jan 2024 12:43:08 +0800 Subject: [PATCH 14/22] LoongArch: Change SHMLBA from SZ_64K to PAGE_SIZE LoongArch has hardware page coloring for L1 Cache, so we don't have cache aliases. But SFB (Store Fill Buffer) still has aliases. So we define SHMLBA to SZ_64K previously. But there are losts of applications use PAGE_SIZE rather than SHMLBA to mmap() file pages and shared pages. Of course we can fix them one by one, but not easy. On the other hand, we can simply disable SFB for 4KB page size to fix cache alias (there will be performance decrease, but acceptable), and in future we will fix SFB in hardware. So we can safely define SHMLBA to PAGE_SIZE (use the generic shmparam.h) to make life easier. Signed-off-by: Huacai Chen --- arch/loongarch/include/asm/shmparam.h | 12 ------------ arch/loongarch/kernel/head.S | 10 ++++++++++ 2 files changed, 10 insertions(+), 12 deletions(-) delete mode 100644 arch/loongarch/include/asm/shmparam.h diff --git a/arch/loongarch/include/asm/shmparam.h b/arch/loongarch/include/asm/shmparam.h deleted file mode 100644 index c9554f48d2df..000000000000 --- a/arch/loongarch/include/asm/shmparam.h +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (C) 2020-2022 Loongson Technology Corporation Limited - */ -#ifndef _ASM_SHMPARAM_H -#define _ASM_SHMPARAM_H - -#define __ARCH_FORCE_SHMLBA 1 - -#define SHMLBA SZ_64K /* attach addr a multiple of this */ - -#endif /* _ASM_SHMPARAM_H */ diff --git a/arch/loongarch/kernel/head.S b/arch/loongarch/kernel/head.S index 53b883db0786..be187e99d358 100644 --- a/arch/loongarch/kernel/head.S +++ b/arch/loongarch/kernel/head.S @@ -75,6 +75,11 @@ SYM_CODE_START(kernel_entry) # kernel entry point la.pcrel t0, fw_arg2 st.d a2, t0, 0 +#ifdef CONFIG_PAGE_SIZE_4KB + li.d t0, 0 + li.d t1, CSR_STFILL + csrxchg t0, t1, LOONGARCH_CSR_IMPCTL1 +#endif /* KSave3 used for percpu base, initialized as 0 */ csrwr zero, PERCPU_BASE_KS /* GPR21 used for percpu base (runtime), initialized as 0 */ @@ -127,6 +132,11 @@ SYM_CODE_START(smpboot_entry) JUMP_VIRT_ADDR t0, t1 +#ifdef CONFIG_PAGE_SIZE_4KB + li.d t0, 0 + li.d t1, CSR_STFILL + csrxchg t0, t1, LOONGARCH_CSR_IMPCTL1 +#endif /* Enable PG */ li.w t0, 0xb0 # PLV=0, IE=0, PG=1 csrwr t0, LOONGARCH_CSR_CRMD From ce68ff3528e6eff4a1a4770600ec6c66779ba7b9 Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Wed, 17 Jan 2024 12:43:08 +0800 Subject: [PATCH 15/22] LoongArch: Let cores_io_master cover the largest NR_CPUS Now loongson_system_configuration::cores_io_master only covers 64 cpus, if NR_CPUS > 64 there will be memory corruption. So let cores_io_master cover the largest NR_CPUS (256). Signed-off-by: Huacai Chen --- arch/loongarch/include/asm/bootinfo.h | 6 ++++-- arch/loongarch/kernel/acpi.c | 2 +- arch/loongarch/kernel/smp.c | 2 +- 3 files changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/loongarch/include/asm/bootinfo.h b/arch/loongarch/include/asm/bootinfo.h index c60796869b2b..6d5846dd075c 100644 --- a/arch/loongarch/include/asm/bootinfo.h +++ b/arch/loongarch/include/asm/bootinfo.h @@ -24,13 +24,15 @@ struct loongson_board_info { const char *board_vendor; }; +#define NR_WORDS DIV_ROUND_UP(NR_CPUS, BITS_PER_LONG) + struct loongson_system_configuration { int nr_cpus; int nr_nodes; int boot_cpu_id; int cores_per_node; int cores_per_package; - unsigned long cores_io_master; + unsigned long cores_io_master[NR_WORDS]; unsigned long suspend_addr; const char *cpuname; }; @@ -42,7 +44,7 @@ extern struct loongson_system_configuration loongson_sysconf; static inline bool io_master(int cpu) { - return test_bit(cpu, &loongson_sysconf.cores_io_master); + return test_bit(cpu, loongson_sysconf.cores_io_master); } #endif /* _ASM_BOOTINFO_H */ diff --git a/arch/loongarch/kernel/acpi.c b/arch/loongarch/kernel/acpi.c index 8e00a754e548..b6b097bbf866 100644 --- a/arch/loongarch/kernel/acpi.c +++ b/arch/loongarch/kernel/acpi.c @@ -119,7 +119,7 @@ acpi_parse_eio_master(union acpi_subtable_headers *header, const unsigned long e return -EINVAL; core = eiointc->node * CORES_PER_EIO_NODE; - set_bit(core, &(loongson_sysconf.cores_io_master)); + set_bit(core, loongson_sysconf.cores_io_master); return 0; } diff --git a/arch/loongarch/kernel/smp.c b/arch/loongarch/kernel/smp.c index 9e33b5e36122..a16e3dbe9f09 100644 --- a/arch/loongarch/kernel/smp.c +++ b/arch/loongarch/kernel/smp.c @@ -208,7 +208,7 @@ static void __init fdt_smp_setup(void) } loongson_sysconf.nr_cpus = num_processors; - set_bit(0, &(loongson_sysconf.cores_io_master)); + set_bit(0, loongson_sysconf.cores_io_master); #endif } From c2396651309eba291c15e32db8fbe44c738b5921 Mon Sep 17 00:00:00 2001 From: Xi Ruoyao Date: Wed, 17 Jan 2024 12:43:08 +0800 Subject: [PATCH 16/22] LoongArch: Fix and simplify fcsr initialization on execve() There has been a lingering bug in LoongArch Linux systems causing some GCC tests to intermittently fail (see Closes link). I've made a minimal reproducer: zsh% cat measure.s .align 4 .globl _start _start: movfcsr2gr $a0, $fcsr0 bstrpick.w $a0, $a0, 16, 16 beqz $a0, .ok break 0 .ok: li.w $a7, 93 syscall 0 zsh% cc mesaure.s -o measure -nostdlib zsh% echo $((1.0/3)) 0.33333333333333331 zsh% while ./measure; do ; done This while loop should not stop as POSIX is clear that execve must set fenv to the default, where FCSR should be zero. But in fact it will just stop after running for a while (normally less than 30 seconds). Note that "$((1.0/3))" is needed to reproduce this issue because it raises FE_INVALID and makes fcsr0 non-zero. The problem is we are currently relying on SET_PERSONALITY2() to reset current->thread.fpu.fcsr. But SET_PERSONALITY2() is executed before start_thread which calls lose_fpu(0). We can see if kernel preempt is enabled, we may switch to another thread after SET_PERSONALITY2() but before lose_fpu(0). Then bad thing happens: during the thread switch the value of the fcsr0 register is stored into current->thread.fpu.fcsr, making it dirty again. The issue can be fixed by setting current->thread.fpu.fcsr after lose_fpu(0) because lose_fpu() clears TIF_USEDFPU, then the thread switch won't touch current->thread.fpu.fcsr. The only other architecture setting FCSR in SET_PERSONALITY2() is MIPS. I've ran a similar test on MIPS with mainline kernel and it turns out MIPS is buggy, too. Anyway MIPS do this for supporting different FP flavors (NaN encodings, etc.) which do not exist on LoongArch. So for LoongArch, we can simply remove the current->thread.fpu.fcsr setting from SET_PERSONALITY2() and do it in start_thread(), after lose_fpu(0). The while loop failing with the mainline kernel has survived one hour after this change on LoongArch. Fixes: 803b0fc5c3f2baa ("LoongArch: Add process management") Closes: https://github.com/loongson-community/discussions/issues/7 Link: https://lore.kernel.org/linux-mips/7a6aa1bbdbbe2e63ae96ff163fab0349f58f1b9e.camel@xry111.site/ Cc: stable@vger.kernel.org Signed-off-by: Xi Ruoyao Signed-off-by: Huacai Chen --- arch/loongarch/include/asm/elf.h | 5 ----- arch/loongarch/kernel/elf.c | 5 ----- arch/loongarch/kernel/process.c | 1 + 3 files changed, 1 insertion(+), 10 deletions(-) diff --git a/arch/loongarch/include/asm/elf.h b/arch/loongarch/include/asm/elf.h index 9b16a3b8e706..f16bd42456e4 100644 --- a/arch/loongarch/include/asm/elf.h +++ b/arch/loongarch/include/asm/elf.h @@ -241,8 +241,6 @@ void loongarch_dump_regs64(u64 *uregs, const struct pt_regs *regs); do { \ current->thread.vdso = &vdso_info; \ \ - loongarch_set_personality_fcsr(state); \ - \ if (personality(current->personality) != PER_LINUX) \ set_personality(PER_LINUX); \ } while (0) @@ -259,7 +257,6 @@ do { \ clear_thread_flag(TIF_32BIT_ADDR); \ \ current->thread.vdso = &vdso_info; \ - loongarch_set_personality_fcsr(state); \ \ p = personality(current->personality); \ if (p != PER_LINUX32 && p != PER_LINUX) \ @@ -340,6 +337,4 @@ extern int arch_elf_pt_proc(void *ehdr, void *phdr, struct file *elf, extern int arch_check_elf(void *ehdr, bool has_interpreter, void *interp_ehdr, struct arch_elf_state *state); -extern void loongarch_set_personality_fcsr(struct arch_elf_state *state); - #endif /* _ASM_ELF_H */ diff --git a/arch/loongarch/kernel/elf.c b/arch/loongarch/kernel/elf.c index 183e94fc9c69..0fa81ced28dc 100644 --- a/arch/loongarch/kernel/elf.c +++ b/arch/loongarch/kernel/elf.c @@ -23,8 +23,3 @@ int arch_check_elf(void *_ehdr, bool has_interpreter, void *_interp_ehdr, { return 0; } - -void loongarch_set_personality_fcsr(struct arch_elf_state *state) -{ - current->thread.fpu.fcsr = boot_cpu_data.fpu_csr0; -} diff --git a/arch/loongarch/kernel/process.c b/arch/loongarch/kernel/process.c index 767d94cce0de..f2ff8b5d591e 100644 --- a/arch/loongarch/kernel/process.c +++ b/arch/loongarch/kernel/process.c @@ -85,6 +85,7 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long sp) regs->csr_euen = euen; lose_fpu(0); lose_lbt(0); + current->thread.fpu.fcsr = boot_cpu_data.fpu_csr0; clear_thread_flag(TIF_LSX_CTX_LIVE); clear_thread_flag(TIF_LASX_CTX_LIVE); From 78de91b45860da175bab73f4521d9ad875f3a7d4 Mon Sep 17 00:00:00 2001 From: Youling Tang Date: Wed, 17 Jan 2024 12:43:08 +0800 Subject: [PATCH 17/22] LoongArch: Use generic interface to support crashkernel=X,[high,low] LoongArch already supports two crashkernel regions in kexec-tools, so we can directly use the common interface to support crashkernel=X,[high,low] after commit 0ab97169aa0517079b ("crash_core: add generic function to do reservation"). With the help of newly changed function parse_crashkernel() and generic reserve_crashkernel_generic(), crashkernel reservation can be simplified by steps: 1) Add a new header file , then define CRASH_ALIGN, CRASH_ADDR_LOW_MAX and CRASH_ADDR_HIGH_MAX and in ; 2) Add arch_reserve_crashkernel() to call parse_crashkernel() and reserve_crashkernel_generic(); 3) Add ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION Kconfig in arch/loongarch/Kconfig. One can reserve the crash kernel from high memory above DMA zone range by explicitly passing "crashkernel=X,high"; or reserve a memory range below 4G with "crashkernel=X,low". Besides, there are few rules need to take notice: 1) "crashkernel=X,[high,low]" will be ignored if "crashkernel=size" is specified. 2) "crashkernel=X,low" is valid only when "crashkernel=X,high" is passed and there is enough memory to be allocated under 4G. 3) When allocating crashkernel above 4G and no "crashkernel=X,low" is specified, a 128M low memory will be allocated automatically for swiotlb bounce buffer. See Documentation/admin-guide/kernel-parameters.txt for more information. Following test cases have been performed as expected: 1) crashkernel=256M //low=256M 2) crashkernel=1G //low=1G 3) crashkernel=4G //high=4G, low=128M(default) 4) crashkernel=4G crashkernel=256M,high //high=4G, low=128M(default), high is ignored 5) crashkernel=4G crashkernel=256M,low //high=4G, low=128M(default), low is ignored 6) crashkernel=4G,high //high=4G, low=128M(default) 7) crashkernel=256M,low //low=0M, invalid 8) crashkernel=4G,high crashkernel=256M,low //high=4G, low=256M 9) crashkernel=4G,high crashkernel=4G,low //high=0M, low=0M, invalid 10) crashkernel=512M@2560M //low=512M 11) crashkernel=1G,high crashkernel=0M,low //high=1G, low=0M Recommended usage in general: 1) In the case of small memory: crashkernel=512M 2) In the case of large memory: crashkernel=1024M,high crashkernel=128M,low Signed-off-by: Youling Tang Signed-off-by: Huacai Chen --- .../admin-guide/kernel-parameters.txt | 24 +++++----- arch/loongarch/Kconfig | 3 ++ arch/loongarch/include/asm/crash_core.h | 12 +++++ arch/loongarch/kernel/setup.c | 44 +++++-------------- 4 files changed, 38 insertions(+), 45 deletions(-) create mode 100644 arch/loongarch/include/asm/crash_core.h diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 65731b060e3f..f2633dd87a97 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -877,9 +877,9 @@ memory region [offset, offset + size] for that kernel image. If '@offset' is omitted, then a suitable offset is selected automatically. - [KNL, X86-64, ARM64, RISCV] Select a region under 4G first, and - fall back to reserve region above 4G when '@offset' - hasn't been specified. + [KNL, X86-64, ARM64, RISCV, LoongArch] Select a region + under 4G first, and fall back to reserve region above + 4G when '@offset' hasn't been specified. See Documentation/admin-guide/kdump/kdump.rst for further details. crashkernel=range1:size1[,range2:size2,...][@offset] @@ -890,25 +890,27 @@ Documentation/admin-guide/kdump/kdump.rst for an example. crashkernel=size[KMG],high - [KNL, X86-64, ARM64, RISCV] range could be above 4G. + [KNL, X86-64, ARM64, RISCV, LoongArch] range could be + above 4G. Allow kernel to allocate physical memory region from top, so could be above 4G if system have more than 4G ram installed. Otherwise memory region will be allocated below 4G, if available. It will be ignored if crashkernel=X is specified. crashkernel=size[KMG],low - [KNL, X86-64, ARM64, RISCV] range under 4G. When crashkernel=X,high - is passed, kernel could allocate physical memory region - above 4G, that cause second kernel crash on system - that require some amount of low memory, e.g. swiotlb - requires at least 64M+32K low memory, also enough extra - low memory is needed to make sure DMA buffers for 32-bit - devices won't run out. Kernel would try to allocate + [KNL, X86-64, ARM64, RISCV, LoongArch] range under 4G. + When crashkernel=X,high is passed, kernel could allocate + physical memory region above 4G, that cause second kernel + crash on system that require some amount of low memory, + e.g. swiotlb requires at least 64M+32K low memory, also + enough extra low memory is needed to make sure DMA buffers + for 32-bit devices won't run out. Kernel would try to allocate default size of memory below 4G automatically. The default size is platform dependent. --> x86: max(swiotlb_size_or_default() + 8MiB, 256MiB) --> arm64: 128MiB --> riscv: 128MiB + --> loongarch: 128MiB This one lets the user specify own low range under 4G for second kernel instead. 0: to disable low allocation. diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig index ede2ef26726a..c997223beae0 100644 --- a/arch/loongarch/Kconfig +++ b/arch/loongarch/Kconfig @@ -594,6 +594,9 @@ config ARCH_SELECTS_CRASH_DUMP depends on CRASH_DUMP select RELOCATABLE +config ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION + def_bool CRASH_CORE + config RELOCATABLE bool "Relocatable kernel" help diff --git a/arch/loongarch/include/asm/crash_core.h b/arch/loongarch/include/asm/crash_core.h new file mode 100644 index 000000000000..218bdbfa527b --- /dev/null +++ b/arch/loongarch/include/asm/crash_core.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +#ifndef _LOONGARCH_CRASH_CORE_H +#define _LOONGARCH_CRASH_CORE_H + +#define CRASH_ALIGN SZ_2M + +#define CRASH_ADDR_LOW_MAX SZ_4G +#define CRASH_ADDR_HIGH_MAX memblock_end_of_DRAM() + +extern phys_addr_t memblock_end_of_DRAM(void); + +#endif diff --git a/arch/loongarch/kernel/setup.c b/arch/loongarch/kernel/setup.c index 15d366b8407c..edf2bba80130 100644 --- a/arch/loongarch/kernel/setup.c +++ b/arch/loongarch/kernel/setup.c @@ -252,38 +252,23 @@ static void __init arch_reserve_vmcore(void) #endif } -/* 2MB alignment for crash kernel regions */ -#define CRASH_ALIGN SZ_2M -#define CRASH_ADDR_MAX SZ_4G - -static void __init arch_parse_crashkernel(void) +static void __init arch_reserve_crashkernel(void) { -#ifdef CONFIG_KEXEC int ret; - unsigned long long total_mem; + unsigned long long low_size = 0; unsigned long long crash_base, crash_size; + char *cmdline = boot_command_line; + bool high = false; - total_mem = memblock_phys_mem_size(); - ret = parse_crashkernel(boot_command_line, total_mem, - &crash_size, &crash_base, - NULL, NULL); - if (ret < 0 || crash_size <= 0) + if (!IS_ENABLED(CONFIG_KEXEC_CORE)) return; - if (crash_base <= 0) { - crash_base = memblock_phys_alloc_range(crash_size, CRASH_ALIGN, CRASH_ALIGN, CRASH_ADDR_MAX); - if (!crash_base) { - pr_warn("crashkernel reservation failed - No suitable area found.\n"); - return; - } - } else if (!memblock_phys_alloc_range(crash_size, CRASH_ALIGN, crash_base, crash_base + crash_size)) { - pr_warn("Invalid memory region reserved for crash kernel\n"); + ret = parse_crashkernel(cmdline, memblock_phys_mem_size(), + &crash_size, &crash_base, &low_size, &high); + if (ret) return; - } - crashk_res.start = crash_base; - crashk_res.end = crash_base + crash_size - 1; -#endif + reserve_crashkernel_generic(cmdline, crash_size, crash_base, low_size, high); } static void __init fdt_setup(void) @@ -363,7 +348,7 @@ out: void __init platform_init(void) { arch_reserve_vmcore(); - arch_parse_crashkernel(); + arch_reserve_crashkernel(); #ifdef CONFIG_ACPI_TABLE_UPGRADE acpi_table_upgrade(); @@ -473,15 +458,6 @@ static void __init resource_init(void) request_resource(res, &data_resource); request_resource(res, &bss_resource); } - -#ifdef CONFIG_KEXEC - if (crashk_res.start < crashk_res.end) { - insert_resource(&iomem_resource, &crashk_res); - pr_info("Reserving %ldMB of memory at %ldMB for crashkernel\n", - (unsigned long)((crashk_res.end - crashk_res.start + 1) >> 20), - (unsigned long)(crashk_res.start >> 20)); - } -#endif } static int __init add_legacy_isa_io(struct fwnode_handle *fwnode, From 91af17cd7d03db8836554c91ba7c38b0817aa980 Mon Sep 17 00:00:00 2001 From: Tiezhu Yang Date: Wed, 17 Jan 2024 12:43:08 +0800 Subject: [PATCH 18/22] LoongArch: Fix definition of ftrace_regs_set_instruction_pointer() The current definition of ftrace_regs_set_instruction_pointer() is not correct. Obviously, this function is used to set instruction pointer but not return value, so it should call instruction_pointer_set() instead of regs_set_return_value(). There is no side effect by now because it is only used for kernel live- patching which is not supported, so fix it to avoid failure when testing livepatch in the future. Fixes: 6fbff14a6382 ("LoongArch: ftrace: Abstract DYNAMIC_FTRACE_WITH_ARGS accesses") Signed-off-by: Tiezhu Yang Signed-off-by: Huacai Chen --- arch/loongarch/include/asm/ftrace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/loongarch/include/asm/ftrace.h b/arch/loongarch/include/asm/ftrace.h index a11996eb5892..de891c2c83d4 100644 --- a/arch/loongarch/include/asm/ftrace.h +++ b/arch/loongarch/include/asm/ftrace.h @@ -63,7 +63,7 @@ ftrace_regs_get_instruction_pointer(struct ftrace_regs *fregs) static __always_inline void ftrace_regs_set_instruction_pointer(struct ftrace_regs *fregs, unsigned long ip) { - regs_set_return_value(&fregs->regs, ip); + instruction_pointer_set(&fregs->regs, ip); } #define ftrace_regs_get_argument(fregs, n) \ From 21c5ae5cc1eee70f7f3b09f1d6b237d9812d4b9c Mon Sep 17 00:00:00 2001 From: Hengqi Chen Date: Wed, 17 Jan 2024 12:43:13 +0800 Subject: [PATCH 19/22] LoongArch: BPF: Support 64-bit pointers to kfuncs Like commit 1cf3bfc60f9836f ("bpf: Support 64-bit pointers to kfuncs") for s390x, add support for 64-bit pointers to kfuncs for LoongArch. Since the infrastructure is already implemented in BPF core, the only thing need to be done is to override bpf_jit_supports_far_kfunc_call(). Before this change, several test_verifier tests failed: # ./test_verifier | grep # | grep FAIL #119/p calls: invalid kfunc call: ptr_to_mem to struct with non-scalar FAIL #120/p calls: invalid kfunc call: ptr_to_mem to struct with nesting depth > 4 FAIL #121/p calls: invalid kfunc call: ptr_to_mem to struct with FAM FAIL #122/p calls: invalid kfunc call: reg->type != PTR_TO_CTX FAIL #123/p calls: invalid kfunc call: void * not allowed in func proto without mem size arg FAIL #124/p calls: trigger reg2btf_ids[reg->type] for reg->type > __BPF_REG_TYPE_MAX FAIL #125/p calls: invalid kfunc call: reg->off must be zero when passed to release kfunc FAIL #126/p calls: invalid kfunc call: don't match first member type when passed to release kfunc FAIL #127/p calls: invalid kfunc call: PTR_TO_BTF_ID with negative offset FAIL #128/p calls: invalid kfunc call: PTR_TO_BTF_ID with variable offset FAIL #129/p calls: invalid kfunc call: referenced arg needs refcounted PTR_TO_BTF_ID FAIL #130/p calls: valid kfunc call: referenced arg needs refcounted PTR_TO_BTF_ID FAIL #486/p map_kptr: ref: reference state created and released on xchg FAIL This is because the kfuncs in the loaded module are far away from __bpf_call_base: ffff800002009440 t bpf_kfunc_call_test_fail1 [bpf_testmod] 9000000002e128d8 T __bpf_call_base The offset relative to __bpf_call_base does NOT fit in s32, which breaks the assumption in BPF core. Enable bpf_jit_supports_far_kfunc_call() lifts this limit. Note that to reproduce the above result, tools/testing/selftests/bpf/config should be applied, and run the test with JIT enabled, unpriv BPF enabled. With this change, the test_verifier tests now all passed: # ./test_verifier ... Summary: 777 PASSED, 0 SKIPPED, 0 FAILED Tested-by: Tiezhu Yang Signed-off-by: Hengqi Chen Signed-off-by: Huacai Chen --- arch/loongarch/net/bpf_jit.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/loongarch/net/bpf_jit.c b/arch/loongarch/net/bpf_jit.c index 4fcd6cd6da23..2f154c60ee00 100644 --- a/arch/loongarch/net/bpf_jit.c +++ b/arch/loongarch/net/bpf_jit.c @@ -201,6 +201,11 @@ bool bpf_jit_supports_kfunc_call(void) return true; } +bool bpf_jit_supports_far_kfunc_call(void) +{ + return true; +} + /* initialized on the first pass of build_body() */ static int out_offset = -1; static int emit_bpf_tail_call(struct jit_ctx *ctx) From 36a87385e31c9343af9a4756598e704741250a67 Mon Sep 17 00:00:00 2001 From: Hengqi Chen Date: Wed, 17 Jan 2024 12:43:13 +0800 Subject: [PATCH 20/22] LoongArch: BPF: Prevent out-of-bounds memory access The test_tag test triggers an unhandled page fault: # ./test_tag [ 130.640218] CPU 0 Unable to handle kernel paging request at virtual address ffff80001b898004, era == 9000000003137f7c, ra == 9000000003139e70 [ 130.640501] Oops[#3]: [ 130.640553] CPU: 0 PID: 1326 Comm: test_tag Tainted: G D O 6.7.0-rc4-loong-devel-gb62ab1a397cf #47 61985c1d94084daa2432f771daa45b56b10d8d2a [ 130.640764] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 130.640874] pc 9000000003137f7c ra 9000000003139e70 tp 9000000104cb4000 sp 9000000104cb7a40 [ 130.641001] a0 ffff80001b894000 a1 ffff80001b897ff8 a2 000000006ba210be a3 0000000000000000 [ 130.641128] a4 000000006ba210be a5 00000000000000f1 a6 00000000000000b3 a7 0000000000000000 [ 130.641256] t0 0000000000000000 t1 00000000000007f6 t2 0000000000000000 t3 9000000004091b70 [ 130.641387] t4 000000006ba210be t5 0000000000000004 t6 fffffffffffffff0 t7 90000000040913e0 [ 130.641512] t8 0000000000000005 u0 0000000000000dc0 s9 0000000000000009 s0 9000000104cb7ae0 [ 130.641641] s1 00000000000007f6 s2 0000000000000009 s3 0000000000000095 s4 0000000000000000 [ 130.641771] s5 ffff80001b894000 s6 ffff80001b897fb0 s7 9000000004090c50 s8 0000000000000000 [ 130.641900] ra: 9000000003139e70 build_body+0x1fcc/0x4988 [ 130.642007] ERA: 9000000003137f7c build_body+0xd8/0x4988 [ 130.642112] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 130.642261] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 130.642353] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 130.642458] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 130.642554] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 130.642658] BADV: ffff80001b898004 [ 130.642719] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 130.642815] Modules linked in: [last unloaded: bpf_testmod(O)] [ 130.642924] Process test_tag (pid: 1326, threadinfo=00000000f7f4015f, task=000000006499f9fd) [ 130.643062] Stack : 0000000000000000 9000000003380724 0000000000000000 0000000104cb7be8 [ 130.643213] 0000000000000000 25af8d9b6e600558 9000000106250ea0 9000000104cb7ae0 [ 130.643378] 0000000000000000 0000000000000000 9000000104cb7be8 90000000049f6000 [ 130.643538] 0000000000000090 9000000106250ea0 ffff80001b894000 ffff80001b894000 [ 130.643685] 00007ffffb917790 900000000313ca94 0000000000000000 0000000000000000 [ 130.643831] ffff80001b894000 0000000000000ff7 0000000000000000 9000000100468000 [ 130.643983] 0000000000000000 0000000000000000 0000000000000040 25af8d9b6e600558 [ 130.644131] 0000000000000bb7 ffff80001b894048 0000000000000000 0000000000000000 [ 130.644276] 9000000104cb7be8 90000000049f6000 0000000000000090 9000000104cb7bdc [ 130.644423] ffff80001b894000 0000000000000000 00007ffffb917790 90000000032acfb0 [ 130.644572] ... [ 130.644629] Call Trace: [ 130.644641] [<9000000003137f7c>] build_body+0xd8/0x4988 [ 130.644785] [<900000000313ca94>] bpf_int_jit_compile+0x228/0x4ec [ 130.644891] [<90000000032acfb0>] bpf_prog_select_runtime+0x158/0x1b0 [ 130.645003] [<90000000032b3504>] bpf_prog_load+0x760/0xb44 [ 130.645089] [<90000000032b6744>] __sys_bpf+0xbb8/0x2588 [ 130.645175] [<90000000032b8388>] sys_bpf+0x20/0x2c [ 130.645259] [<9000000003f6ab38>] do_syscall+0x7c/0x94 [ 130.645369] [<9000000003121c5c>] handle_syscall+0xbc/0x158 [ 130.645507] [ 130.645539] Code: 380839f6 380831f9 28412bae <24000ca6> 004081ad 0014cb50 004083e8 02bff34c 58008e91 [ 130.645729] [ 130.646418] ---[ end trace 0000000000000000 ]--- On my machine, which has CONFIG_PAGE_SIZE_16KB=y, the test failed at loading a BPF prog with 2039 instructions: prog = (struct bpf_prog *)ffff80001b894000 insn = (struct bpf_insn *)(prog->insnsi)ffff80001b894048 insn + 2039 = (struct bpf_insn *)ffff80001b898000 <- end of the page In the build_insn() function, we are trying to access next instruction unconditionally, i.e. `(insn + 1)->imm`. The address lies in the next page and can be not owned by the current process, thus an page fault is inevitable and then segfault. So, let's access next instruction only under `dst = imm64` context. With this fix, we have: # ./test_tag test_tag: OK (40945 tests) Fixes: bbfddb904df6f82 ("LoongArch: BPF: Avoid declare variables in switch-case") Tested-by: Tiezhu Yang Signed-off-by: Hengqi Chen Signed-off-by: Huacai Chen --- arch/loongarch/net/bpf_jit.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/loongarch/net/bpf_jit.c b/arch/loongarch/net/bpf_jit.c index 2f154c60ee00..e73323d759d0 100644 --- a/arch/loongarch/net/bpf_jit.c +++ b/arch/loongarch/net/bpf_jit.c @@ -470,7 +470,6 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext const u8 dst = regmap[insn->dst_reg]; const s16 off = insn->off; const s32 imm = insn->imm; - const u64 imm64 = (u64)(insn + 1)->imm << 32 | (u32)insn->imm; const bool is32 = BPF_CLASS(insn->code) == BPF_ALU || BPF_CLASS(insn->code) == BPF_JMP32; switch (code) { @@ -928,8 +927,12 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext /* dst = imm64 */ case BPF_LD | BPF_IMM | BPF_DW: + { + const u64 imm64 = (u64)(insn + 1)->imm << 32 | (u32)insn->imm; + move_imm(ctx, dst, imm64, is32); return 1; + } /* dst = *(size *)(src + off) */ case BPF_LDX | BPF_MEM | BPF_B: From fc562925f51c0ce462c17b24a5c538db676af576 Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Wed, 17 Jan 2024 12:43:13 +0800 Subject: [PATCH 21/22] LoongArch: Update Loongson-3 default config file 1, Increase NR_CPUS to 256. 2, Enable some cgroup options. 3, Enable some PREEMPT_DYNAMIC/SCHED_CORE options. 4, Enable some CMA/DMA_CMA options. 5, Enable some F2FS options. 6, Enable some DMABUF/UDMABUF options. 7, Enable some USB4 and NTB options. 8, Enable some networking options (MPTCP). 9, Enable Loongson-specific drivers: APB DMA, ASoC. 10, Enable PCI_HOST_GENERIC and SND_VIRTIO for virtual machine. 11, Remove obsolete SECURITY_SELINUX_DISABLE. 12, Regenerate the whole file to keep the order of options be the same as the latest source code. Signed-off-by: Huacai Chen --- arch/loongarch/configs/loongson3_defconfig | 55 ++++++++++++++++++---- 1 file changed, 47 insertions(+), 8 deletions(-) diff --git a/arch/loongarch/configs/loongson3_defconfig b/arch/loongarch/configs/loongson3_defconfig index 33795e4a5bd6..fd8d8a38cf5d 100644 --- a/arch/loongarch/configs/loongson3_defconfig +++ b/arch/loongarch/configs/loongson3_defconfig @@ -6,6 +6,8 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_BPF_SYSCALL=y CONFIG_BPF_JIT=y CONFIG_PREEMPT=y +CONFIG_PREEMPT_DYNAMIC=y +CONFIG_SCHED_CORE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_TASKSTATS=y @@ -19,6 +21,7 @@ CONFIG_BLK_CGROUP=y CONFIG_CFS_BANDWIDTH=y CONFIG_RT_GROUP_SCHED=y CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_RDMA=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_HUGETLB=y CONFIG_CPUSETS=y @@ -26,6 +29,7 @@ CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y CONFIG_CGROUP_PERF=y CONFIG_CGROUP_BPF=y +CONFIG_CGROUP_MISC=y CONFIG_NAMESPACES=y CONFIG_USER_NS=y CONFIG_CHECKPOINT_RESTORE=y @@ -35,6 +39,8 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_EXPERT=y CONFIG_KALLSYMS_ALL=y CONFIG_PERF_EVENTS=y +CONFIG_KEXEC=y +CONFIG_CRASH_DUMP=y CONFIG_LOONGARCH=y CONFIG_64BIT=y CONFIG_MACH_LOONGSON64=y @@ -44,13 +50,11 @@ CONFIG_DMI=y CONFIG_EFI=y CONFIG_SMP=y CONFIG_HOTPLUG_CPU=y -CONFIG_NR_CPUS=64 +CONFIG_NR_CPUS=256 CONFIG_NUMA=y CONFIG_CPU_HAS_FPU=y CONFIG_CPU_HAS_LSX=y CONFIG_CPU_HAS_LASX=y -CONFIG_KEXEC=y -CONFIG_CRASH_DUMP=y CONFIG_RANDOMIZE_BASE=y CONFIG_SUSPEND=y CONFIG_HIBERNATION=y @@ -62,10 +66,6 @@ CONFIG_ACPI_IPMI=m CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_PCI_SLOT=y CONFIG_ACPI_HOTPLUG_MEMORY=y -CONFIG_EFI_ZBOOT=y -CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=y -CONFIG_EFI_CAPSULE_LOADER=m -CONFIG_EFI_TEST=m CONFIG_VIRTUALIZATION=y CONFIG_KVM=m CONFIG_JUMP_LABEL=y @@ -74,10 +74,18 @@ CONFIG_MODULE_FORCE_LOAD=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y +CONFIG_BLK_DEV_ZONED=y CONFIG_BLK_DEV_THROTTLING=y +CONFIG_BLK_DEV_THROTTLING_LOW=y +CONFIG_BLK_WBT=y +CONFIG_BLK_CGROUP_IOLATENCY=y +CONFIG_BLK_CGROUP_FC_APPID=y +CONFIG_BLK_CGROUP_IOCOST=y +CONFIG_BLK_CGROUP_IOPRIO=y CONFIG_PARTITION_ADVANCED=y CONFIG_BSD_DISKLABEL=y CONFIG_UNIXWARE_DISKLABEL=y +CONFIG_CMDLINE_PARTITION=y CONFIG_IOSCHED_BFQ=y CONFIG_BFQ_GROUP_IOSCHED=y CONFIG_BINFMT_MISC=m @@ -93,6 +101,8 @@ CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_KSM=y CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_CMA=y +CONFIG_CMA_SYSFS=y CONFIG_USERFAULTFD=y CONFIG_NET=y CONFIG_PACKET=y @@ -128,6 +138,7 @@ CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y CONFIG_INET6_ESP=m CONFIG_IPV6_MROUTE=y +CONFIG_MPTCP=y CONFIG_NETWORK_PHY_TIMESTAMPING=y CONFIG_NETFILTER=y CONFIG_BRIDGE_NETFILTER=m @@ -354,6 +365,7 @@ CONFIG_PCIEAER=y CONFIG_PCI_IOV=y CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_SHPC=y +CONFIG_PCI_HOST_GENERIC=y CONFIG_PCCARD=m CONFIG_YENTA=m CONFIG_RAPIDIO=y @@ -367,6 +379,10 @@ CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_FW_LOADER_COMPRESS=y CONFIG_FW_LOADER_COMPRESS_ZSTD=y +CONFIG_EFI_ZBOOT=y +CONFIG_EFI_BOOTLOADER_CONTROL=m +CONFIG_EFI_CAPSULE_LOADER=m +CONFIG_EFI_TEST=m CONFIG_MTD=m CONFIG_MTD_BLOCK=m CONFIG_MTD_CFI=m @@ -588,6 +604,7 @@ CONFIG_RTW89_8852AE=m CONFIG_RTW89_8852CE=m CONFIG_ZD1211RW=m CONFIG_USB_NET_RNDIS_WLAN=m +CONFIG_USB4_NET=m CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_EVDEV=y @@ -693,6 +710,9 @@ CONFIG_SND_HDA_CODEC_SIGMATEL=y CONFIG_SND_HDA_CODEC_HDMI=y CONFIG_SND_HDA_CODEC_CONEXANT=y CONFIG_SND_USB_AUDIO=m +CONFIG_SND_SOC=m +CONFIG_SND_SOC_LOONGSON_CARD=m +CONFIG_SND_VIRTIO=m CONFIG_HIDRAW=y CONFIG_UHID=m CONFIG_HID_A4TECH=m @@ -740,6 +760,11 @@ CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_EFI=y CONFIG_RTC_DRV_LOONGSON=y CONFIG_DMADEVICES=y +CONFIG_LS2X_APB_DMA=y +CONFIG_UDMABUF=y +CONFIG_DMABUF_HEAPS=y +CONFIG_DMABUF_HEAPS_SYSTEM=y +CONFIG_DMABUF_HEAPS_CMA=y CONFIG_UIO=m CONFIG_UIO_PDRV_GENIRQ=m CONFIG_UIO_DMEM_GENIRQ=m @@ -780,7 +805,15 @@ CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y CONFIG_DEVFREQ_GOV_PERFORMANCE=y CONFIG_DEVFREQ_GOV_POWERSAVE=y CONFIG_DEVFREQ_GOV_USERSPACE=y +CONFIG_NTB=m +CONFIG_NTB_MSI=y +CONFIG_NTB_IDT=m +CONFIG_NTB_EPF=m +CONFIG_NTB_SWITCHTEC=m +CONFIG_NTB_PERF=m +CONFIG_NTB_TRANSPORT=m CONFIG_PWM=y +CONFIG_USB4=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -799,6 +832,10 @@ CONFIG_GFS2_FS_LOCKING_DLM=y CONFIG_OCFS2_FS=m CONFIG_BTRFS_FS=y CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_F2FS_FS=m +CONFIG_F2FS_FS_SECURITY=y +CONFIG_F2FS_CHECK_FS=y +CONFIG_F2FS_FS_COMPRESSION=y CONFIG_FANOTIFY=y CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y CONFIG_QUOTA=y @@ -885,7 +922,6 @@ CONFIG_KEY_DH_OPERATIONS=y CONFIG_SECURITY=y CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y -CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_APPARMOR=y CONFIG_SECURITY_YAMA=y CONFIG_DEFAULT_SECURITY_DAC=y @@ -916,6 +952,9 @@ CONFIG_CRYPTO_USER_API_RNG=m CONFIG_CRYPTO_USER_API_AEAD=m CONFIG_CRYPTO_CRC32_LOONGARCH=m CONFIG_CRYPTO_DEV_VIRTIO=m +CONFIG_DMA_CMA=y +CONFIG_DMA_NUMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=0 CONFIG_PRINTK_TIME=y CONFIG_STRIP_ASM_SYMS=y CONFIG_MAGIC_SYSRQ=y From 6e441fa3ac475be73c03c9a85bd305d66ea476a6 Mon Sep 17 00:00:00 2001 From: Tiezhu Yang Date: Wed, 17 Jan 2024 12:43:13 +0800 Subject: [PATCH 22/22] MAINTAINERS: Add BPF JIT for LOONGARCH entry After commit 5dc615520c4d ("LoongArch: Add BPF JIT support"), there is no BPF JIT for LOONGARCH entry, in order to maintain the current code and the new features timely, just add it. Signed-off-by: Tiezhu Yang Signed-off-by: Huacai Chen --- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index a7c4cf8201e0..afe2f311232f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3651,6 +3651,13 @@ L: bpf@vger.kernel.org S: Supported F: arch/arm64/net/ +BPF JIT for LOONGARCH +M: Tiezhu Yang +R: Hengqi Chen +L: bpf@vger.kernel.org +S: Maintained +F: arch/loongarch/net/ + BPF JIT for MIPS (32-BIT AND 64-BIT) M: Johan Almbladh M: Paul Burton