mirror of
https://github.com/torvalds/linux.git
synced 2024-12-29 14:21:47 +00:00
staging: comedi: cb_pcidas64: remove DEBUG_PRINT
The DEBUG_PRINT macro in this driver is used to output development debug tracing messages. These messages are just added noise. Remove them. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
H Hartley Sweeten
Greg Kroah-Hartman
parent
096669a830
commit
220edb9166
@ -94,15 +94,6 @@ TODO:
|
||||
#include "plx9080.h"
|
||||
#include "comedi_fc.h"
|
||||
|
||||
#undef PCIDAS64_DEBUG /* disable debugging code */
|
||||
/* #define PCIDAS64_DEBUG enable debugging code */
|
||||
|
||||
#ifdef PCIDAS64_DEBUG
|
||||
#define DEBUG_PRINT(format, args...) pr_debug(format, ## args)
|
||||
#else
|
||||
#define DEBUG_PRINT(format, args...) no_printk(format, ## args)
|
||||
#endif
|
||||
|
||||
#define TIMER_BASE 25 /* 40MHz master clock */
|
||||
/* 100kHz 'prescaled' clock for slow acquisition,
|
||||
* maybe I'll support this someday */
|
||||
@ -1252,8 +1243,6 @@ static void disable_ai_interrupts(struct comedi_device *dev)
|
||||
writew(devpriv->intr_enable_bits,
|
||||
devpriv->main_iobase + INTR_ENABLE_REG);
|
||||
spin_unlock_irqrestore(&dev->spinlock, flags);
|
||||
|
||||
DEBUG_PRINT("intr enable bits 0x%x\n", devpriv->intr_enable_bits);
|
||||
}
|
||||
|
||||
static void enable_ai_interrupts(struct comedi_device *dev,
|
||||
@ -1277,7 +1266,6 @@ static void enable_ai_interrupts(struct comedi_device *dev,
|
||||
devpriv->intr_enable_bits |= bits;
|
||||
writew(devpriv->intr_enable_bits,
|
||||
devpriv->main_iobase + INTR_ENABLE_REG);
|
||||
DEBUG_PRINT("intr enable bits 0x%x\n", devpriv->intr_enable_bits);
|
||||
spin_unlock_irqrestore(&dev->spinlock, flags);
|
||||
}
|
||||
|
||||
@ -1292,38 +1280,6 @@ static void init_plx9080(struct comedi_device *dev)
|
||||
devpriv->plx_control_bits =
|
||||
readl(devpriv->plx9080_iobase + PLX_CONTROL_REG);
|
||||
|
||||
/* plx9080 dump */
|
||||
DEBUG_PRINT(" plx interrupt status 0x%x\n",
|
||||
readl(plx_iobase + PLX_INTRCS_REG));
|
||||
DEBUG_PRINT(" plx id bits 0x%x\n", readl(plx_iobase + PLX_ID_REG));
|
||||
DEBUG_PRINT(" plx control reg 0x%x\n", devpriv->plx_control_bits);
|
||||
DEBUG_PRINT(" plx mode/arbitration reg 0x%x\n",
|
||||
readl(plx_iobase + PLX_MARB_REG));
|
||||
DEBUG_PRINT(" plx region0 reg 0x%x\n",
|
||||
readl(plx_iobase + PLX_REGION0_REG));
|
||||
DEBUG_PRINT(" plx region1 reg 0x%x\n",
|
||||
readl(plx_iobase + PLX_REGION1_REG));
|
||||
|
||||
DEBUG_PRINT(" plx revision 0x%x\n",
|
||||
readl(plx_iobase + PLX_REVISION_REG));
|
||||
DEBUG_PRINT(" plx dma channel 0 mode 0x%x\n",
|
||||
readl(plx_iobase + PLX_DMA0_MODE_REG));
|
||||
DEBUG_PRINT(" plx dma channel 1 mode 0x%x\n",
|
||||
readl(plx_iobase + PLX_DMA1_MODE_REG));
|
||||
DEBUG_PRINT(" plx dma channel 0 pci address 0x%x\n",
|
||||
readl(plx_iobase + PLX_DMA0_PCI_ADDRESS_REG));
|
||||
DEBUG_PRINT(" plx dma channel 0 local address 0x%x\n",
|
||||
readl(plx_iobase + PLX_DMA0_LOCAL_ADDRESS_REG));
|
||||
DEBUG_PRINT(" plx dma channel 0 transfer size 0x%x\n",
|
||||
readl(plx_iobase + PLX_DMA0_TRANSFER_SIZE_REG));
|
||||
DEBUG_PRINT(" plx dma channel 0 descriptor 0x%x\n",
|
||||
readl(plx_iobase + PLX_DMA0_DESCRIPTOR_REG));
|
||||
DEBUG_PRINT(" plx dma channel 0 command status 0x%x\n",
|
||||
readb(plx_iobase + PLX_DMA0_CS_REG));
|
||||
DEBUG_PRINT(" plx dma channel 0 threshold 0x%x\n",
|
||||
readl(plx_iobase + PLX_DMA0_THRESHOLD_REG));
|
||||
DEBUG_PRINT(" plx bigend 0x%x\n", readl(plx_iobase + PLX_BIGEND_REG));
|
||||
|
||||
#ifdef __BIG_ENDIAN
|
||||
bits = BIGEND_DMA0 | BIGEND_DMA1;
|
||||
#else
|
||||
@ -1417,9 +1373,6 @@ static int set_ai_fifo_segment_length(struct comedi_device *dev,
|
||||
|
||||
devpriv->ai_fifo_segment_length = num_increments * increment_size;
|
||||
|
||||
DEBUG_PRINT("set hardware fifo segment length to %i\n",
|
||||
devpriv->ai_fifo_segment_length);
|
||||
|
||||
return devpriv->ai_fifo_segment_length;
|
||||
}
|
||||
|
||||
@ -1441,8 +1394,6 @@ static int set_ai_fifo_size(struct comedi_device *dev, unsigned int num_samples)
|
||||
|
||||
num_samples = retval * fifo->num_segments * fifo->sample_packing_ratio;
|
||||
|
||||
DEBUG_PRINT("set hardware fifo size to %i\n", num_samples);
|
||||
|
||||
return num_samples;
|
||||
}
|
||||
|
||||
@ -1538,8 +1489,6 @@ static int alloc_and_init_dma_members(struct comedi_device *dev)
|
||||
if (devpriv->ai_dma_desc == NULL)
|
||||
return -ENOMEM;
|
||||
|
||||
DEBUG_PRINT("ai dma descriptors start at bus addr 0x%llx\n",
|
||||
(unsigned long long)devpriv->ai_dma_desc_bus_addr);
|
||||
if (ao_cmd_is_supported(thisboard)) {
|
||||
devpriv->ao_dma_desc =
|
||||
pci_alloc_consistent(pcidev,
|
||||
@ -1548,9 +1497,6 @@ static int alloc_and_init_dma_members(struct comedi_device *dev)
|
||||
&devpriv->ao_dma_desc_bus_addr);
|
||||
if (devpriv->ao_dma_desc == NULL)
|
||||
return -ENOMEM;
|
||||
|
||||
DEBUG_PRINT("ao dma descriptors start at bus addr 0x%llx\n",
|
||||
(unsigned long long)devpriv->ao_dma_desc_bus_addr);
|
||||
}
|
||||
/* initialize dma descriptors */
|
||||
for (i = 0; i < ai_dma_ring_count(thisboard); i++) {
|
||||
@ -1650,8 +1596,6 @@ static void i2c_write_byte(struct comedi_device *dev, uint8_t byte)
|
||||
uint8_t bit;
|
||||
unsigned int num_bits = 8;
|
||||
|
||||
DEBUG_PRINT("writing to i2c byte 0x%x\n", byte);
|
||||
|
||||
for (bit = 1 << (num_bits - 1); bit; bit >>= 1) {
|
||||
i2c_set_scl(dev, 0);
|
||||
if ((byte & bit))
|
||||
@ -1738,7 +1682,6 @@ static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
|
||||
unsigned long flags;
|
||||
static const int timeout = 100;
|
||||
|
||||
DEBUG_PRINT("chanspec 0x%x\n", insn->chanspec);
|
||||
channel = CR_CHAN(insn->chanspec);
|
||||
range = CR_RANGE(insn->chanspec);
|
||||
aref = CR_AREF(insn->chanspec);
|
||||
@ -1766,7 +1709,6 @@ static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
|
||||
if (insn->chanspec & CR_ALT_SOURCE) {
|
||||
unsigned int cal_en_bit;
|
||||
|
||||
DEBUG_PRINT("reading calibration source\n");
|
||||
if (thisboard->layout == LAYOUT_60XX)
|
||||
cal_en_bit = CAL_EN_60XX_BIT;
|
||||
else
|
||||
@ -1800,7 +1742,6 @@ static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
|
||||
|
||||
devpriv->i2c_cal_range_bits &= ~ADC_SRC_4020_MASK;
|
||||
if (insn->chanspec & CR_ALT_SOURCE) {
|
||||
DEBUG_PRINT("reading calibration source\n");
|
||||
devpriv->i2c_cal_range_bits |=
|
||||
adc_src_4020_bits(devpriv->calibration_source);
|
||||
} else { /* select BNC inputs */
|
||||
@ -1839,7 +1780,6 @@ static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
|
||||
/* wait for data */
|
||||
for (i = 0; i < timeout; i++) {
|
||||
bits = readw(devpriv->main_iobase + HW_STATUS_REG);
|
||||
DEBUG_PRINT(" pipe bits 0x%x\n", pipe_full_bits(bits));
|
||||
if (thisboard->layout == LAYOUT_4020) {
|
||||
if (readw(devpriv->main_iobase +
|
||||
ADC_WRITE_PNTR_REG))
|
||||
@ -1850,7 +1790,6 @@ static int ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
|
||||
}
|
||||
udelay(1);
|
||||
}
|
||||
DEBUG_PRINT(" looped %i times waiting for data\n", i);
|
||||
if (i == timeout) {
|
||||
comedi_error(dev, " analog input read insn timed out");
|
||||
dev_info(dev->class_dev, "status 0x%x\n", bits);
|
||||
@ -1884,7 +1823,6 @@ static int ai_config_calibration_source(struct comedi_device *dev,
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
DEBUG_PRINT("setting calibration source to %i\n", source);
|
||||
devpriv->calibration_source = source;
|
||||
|
||||
return 2;
|
||||
@ -2368,7 +2306,6 @@ static void set_ai_pacing(struct comedi_device *dev, struct comedi_cmd *cmd)
|
||||
/* load lower 16 bits of convert interval */
|
||||
writew(convert_counter & 0xffff,
|
||||
devpriv->main_iobase + ADC_SAMPLE_INTERVAL_LOWER_REG);
|
||||
DEBUG_PRINT("convert counter 0x%x\n", convert_counter);
|
||||
/* load upper 8 bits of convert interval */
|
||||
writew((convert_counter >> 16) & 0xff,
|
||||
devpriv->main_iobase + ADC_SAMPLE_INTERVAL_UPPER_REG);
|
||||
@ -2378,7 +2315,6 @@ static void set_ai_pacing(struct comedi_device *dev, struct comedi_cmd *cmd)
|
||||
/* load upper 8 bits of scan delay */
|
||||
writew((scan_counter >> 16) & 0xff,
|
||||
devpriv->main_iobase + ADC_DELAY_INTERVAL_UPPER_REG);
|
||||
DEBUG_PRINT("scan counter 0x%x\n", scan_counter);
|
||||
}
|
||||
|
||||
static int use_internal_queue_6xxx(const struct comedi_cmd *cmd)
|
||||
@ -2469,9 +2405,6 @@ static int setup_channel_queue(struct comedi_device *dev,
|
||||
writew(bits,
|
||||
devpriv->main_iobase +
|
||||
ADC_QUEUE_FIFO_REG);
|
||||
DEBUG_PRINT(
|
||||
"wrote 0x%x to external channel queue\n",
|
||||
bits);
|
||||
}
|
||||
/* doing a queue clear is not specified in board docs,
|
||||
* but required for reliable operation */
|
||||
@ -2593,7 +2526,6 @@ static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
|
||||
}
|
||||
writew(devpriv->adc_control1_bits,
|
||||
devpriv->main_iobase + ADC_CONTROL1_REG);
|
||||
DEBUG_PRINT("control1 bits 0x%x\n", devpriv->adc_control1_bits);
|
||||
spin_unlock_irqrestore(&dev->spinlock, flags);
|
||||
|
||||
/* clear adc buffer */
|
||||
@ -2645,17 +2577,14 @@ static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
|
||||
if (use_hw_sample_counter(cmd))
|
||||
bits |= ADC_SAMPLE_COUNTER_EN_BIT;
|
||||
writew(bits, devpriv->main_iobase + ADC_CONTROL0_REG);
|
||||
DEBUG_PRINT("control0 bits 0x%x\n", bits);
|
||||
|
||||
devpriv->ai_cmd_running = 1;
|
||||
|
||||
spin_unlock_irqrestore(&dev->spinlock, flags);
|
||||
|
||||
/* start acquisition */
|
||||
if (cmd->start_src == TRIG_NOW) {
|
||||
if (cmd->start_src == TRIG_NOW)
|
||||
writew(0, devpriv->main_iobase + ADC_START_REG);
|
||||
DEBUG_PRINT("soft trig\n");
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
@ -2690,10 +2619,6 @@ static void pio_drain_ai_fifo_16(struct comedi_device *dev)
|
||||
read_segment = adc_upper_read_ptr_code(prepost_bits);
|
||||
write_segment = adc_upper_write_ptr_code(prepost_bits);
|
||||
|
||||
DEBUG_PRINT(" rd seg %i, wrt seg %i, rd idx %i, wrt idx %i\n",
|
||||
read_segment, write_segment, read_index,
|
||||
write_index);
|
||||
|
||||
if (read_segment != write_segment)
|
||||
num_samples =
|
||||
devpriv->ai_fifo_segment_length - read_index;
|
||||
@ -2715,8 +2640,6 @@ static void pio_drain_ai_fifo_16(struct comedi_device *dev)
|
||||
break;
|
||||
}
|
||||
|
||||
DEBUG_PRINT(" read %i samples from fifo\n", num_samples);
|
||||
|
||||
for (i = 0; i < num_samples; i++) {
|
||||
cfc_write_to_buffer(s,
|
||||
readw(devpriv->main_iobase +
|
||||
@ -2812,11 +2735,6 @@ static void drain_dma_buffers(struct comedi_device *dev, unsigned int channel)
|
||||
num_samples * sizeof(uint16_t));
|
||||
devpriv->ai_dma_index = (devpriv->ai_dma_index + 1) %
|
||||
ai_dma_ring_count(thisboard);
|
||||
|
||||
DEBUG_PRINT("next buffer addr 0x%lx\n",
|
||||
(unsigned long)devpriv->
|
||||
ai_buffer_bus_addr[devpriv->ai_dma_index]);
|
||||
DEBUG_PRINT("pci addr reg 0x%x\n", next_transfer_addr);
|
||||
}
|
||||
/* XXX check for dma ring buffer overrun
|
||||
* (use end-of-chain bit to mark last unused buffer) */
|
||||
@ -2845,24 +2763,17 @@ static void handle_ai_interrupt(struct comedi_device *dev,
|
||||
if (plx_status & ICS_DMA1_A) { /* dma chan 1 interrupt */
|
||||
writeb((dma1_status & PLX_DMA_EN_BIT) | PLX_CLEAR_DMA_INTR_BIT,
|
||||
devpriv->plx9080_iobase + PLX_DMA1_CS_REG);
|
||||
DEBUG_PRINT("dma1 status 0x%x\n", dma1_status);
|
||||
|
||||
if (dma1_status & PLX_DMA_EN_BIT)
|
||||
drain_dma_buffers(dev, 1);
|
||||
|
||||
DEBUG_PRINT(" cleared dma ch1 interrupt\n");
|
||||
}
|
||||
spin_unlock_irqrestore(&dev->spinlock, flags);
|
||||
|
||||
if (status & ADC_DONE_BIT)
|
||||
DEBUG_PRINT("adc done interrupt\n");
|
||||
|
||||
/* drain fifo with pio */
|
||||
if ((status & ADC_DONE_BIT) ||
|
||||
((cmd->flags & TRIG_WAKE_EOS) &&
|
||||
(status & ADC_INTR_PENDING_BIT) &&
|
||||
(thisboard->layout != LAYOUT_4020))) {
|
||||
DEBUG_PRINT("pio fifo drain\n");
|
||||
spin_lock_irqsave(&dev->spinlock, flags);
|
||||
if (devpriv->ai_cmd_running) {
|
||||
spin_unlock_irqrestore(&dev->spinlock, flags);
|
||||
@ -2947,7 +2858,6 @@ static void restart_ao_dma(struct comedi_device *dev)
|
||||
dma_desc_bits =
|
||||
readl(devpriv->plx9080_iobase + PLX_DMA0_DESCRIPTOR_REG);
|
||||
dma_desc_bits &= ~PLX_END_OF_CHAIN_BIT;
|
||||
DEBUG_PRINT("restarting ao dma, descriptor reg 0x%x\n", dma_desc_bits);
|
||||
load_first_dma_descriptor(dev, 0, dma_desc_bits);
|
||||
|
||||
dma_start_sync(dev, 0);
|
||||
@ -2963,10 +2873,6 @@ static unsigned int load_ao_dma_buffer(struct comedi_device *dev,
|
||||
buffer_index = devpriv->ao_dma_index;
|
||||
prev_buffer_index = prev_ao_dma_index(dev);
|
||||
|
||||
DEBUG_PRINT("attempting to load ao buffer %i (0x%llx)\n", buffer_index,
|
||||
(unsigned long long)devpriv->ao_buffer_bus_addr[
|
||||
buffer_index]);
|
||||
|
||||
num_bytes = comedi_buf_read_n_available(dev->write_subdev->async);
|
||||
if (num_bytes > DMA_BUFFER_SIZE)
|
||||
num_bytes = DMA_BUFFER_SIZE;
|
||||
@ -2977,8 +2883,6 @@ static unsigned int load_ao_dma_buffer(struct comedi_device *dev,
|
||||
if (num_bytes == 0)
|
||||
return 0;
|
||||
|
||||
DEBUG_PRINT("loading %i bytes\n", num_bytes);
|
||||
|
||||
num_bytes = cfc_read_array_from_buffer(dev->write_subdev,
|
||||
devpriv->
|
||||
ao_buffer[buffer_index],
|
||||
@ -3052,14 +2956,12 @@ static void handle_ao_interrupt(struct comedi_device *dev,
|
||||
writeb(PLX_CLEAR_DMA_INTR_BIT,
|
||||
devpriv->plx9080_iobase + PLX_DMA0_CS_REG);
|
||||
spin_unlock_irqrestore(&dev->spinlock, flags);
|
||||
DEBUG_PRINT("dma0 status 0x%x\n", dma0_status);
|
||||
if (dma0_status & PLX_DMA_EN_BIT) {
|
||||
load_ao_dma(dev, cmd);
|
||||
/* try to recover from dma end-of-chain event */
|
||||
if (ao_dma_needs_restart(dev, dma0_status))
|
||||
restart_ao_dma(dev);
|
||||
}
|
||||
DEBUG_PRINT(" cleared dma ch0 interrupt\n");
|
||||
} else {
|
||||
spin_unlock_irqrestore(&dev->spinlock, flags);
|
||||
}
|
||||
@ -3068,12 +2970,6 @@ static void handle_ao_interrupt(struct comedi_device *dev,
|
||||
async->events |= COMEDI_CB_EOA;
|
||||
if (ao_stopped_by_error(dev, cmd))
|
||||
async->events |= COMEDI_CB_ERROR;
|
||||
DEBUG_PRINT("plx dma0 desc reg 0x%x\n",
|
||||
readl(devpriv->plx9080_iobase +
|
||||
PLX_DMA0_DESCRIPTOR_REG));
|
||||
DEBUG_PRINT("plx dma0 address reg 0x%x\n",
|
||||
readl(devpriv->plx9080_iobase +
|
||||
PLX_DMA0_PCI_ADDRESS_REG));
|
||||
}
|
||||
cfc_handle_events(dev, s);
|
||||
}
|
||||
@ -3089,15 +2985,12 @@ static irqreturn_t handle_interrupt(int irq, void *d)
|
||||
plx_status = readl(devpriv->plx9080_iobase + PLX_INTRCS_REG);
|
||||
status = readw(devpriv->main_iobase + HW_STATUS_REG);
|
||||
|
||||
DEBUG_PRINT("hw status 0x%x, plx status 0x%x\n", status, plx_status);
|
||||
|
||||
/* an interrupt before all the postconfig stuff gets done could
|
||||
* cause a NULL dereference if we continue through the
|
||||
* interrupt handler */
|
||||
if (!dev->attached) {
|
||||
DEBUG_PRINT("premature interrupt, ignoring\n");
|
||||
if (!dev->attached)
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
handle_ai_interrupt(dev, status, plx_status);
|
||||
handle_ao_interrupt(dev, status, plx_status);
|
||||
|
||||
@ -3105,11 +2998,8 @@ static irqreturn_t handle_interrupt(int irq, void *d)
|
||||
if (plx_status & ICS_LDIA) { /* clear local doorbell interrupt */
|
||||
plx_bits = readl(devpriv->plx9080_iobase + PLX_DBR_OUT_REG);
|
||||
writel(plx_bits, devpriv->plx9080_iobase + PLX_DBR_OUT_REG);
|
||||
DEBUG_PRINT(" cleared local doorbell bits 0x%x\n", plx_bits);
|
||||
}
|
||||
|
||||
DEBUG_PRINT("exiting handler\n");
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
@ -3130,7 +3020,6 @@ static int ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
|
||||
|
||||
abort_dma(dev, 1);
|
||||
|
||||
DEBUG_PRINT("ai canceled\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
@ -3458,7 +3347,6 @@ static int dio_callback(int dir, int port, int data, unsigned long arg)
|
||||
void __iomem *iobase = (void __iomem *)arg;
|
||||
if (dir) {
|
||||
writeb(data, iobase + port);
|
||||
DEBUG_PRINT("wrote 0x%x to port %i\n", data, port);
|
||||
return 0;
|
||||
} else {
|
||||
return readb(iobase + port);
|
||||
@ -4046,11 +3934,6 @@ static int auto_attach(struct comedi_device *dev,
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
DEBUG_PRINT(" plx9080 remapped to 0x%p\n", devpriv->plx9080_iobase);
|
||||
DEBUG_PRINT(" main remapped to 0x%p\n", devpriv->main_iobase);
|
||||
DEBUG_PRINT(" diocounter remapped to 0x%p\n",
|
||||
devpriv->dio_counter_iobase);
|
||||
|
||||
/* figure out what local addresses are */
|
||||
local_range = readl(devpriv->plx9080_iobase + PLX_LAS0RNG_REG) &
|
||||
LRNG_MEM_MASK;
|
||||
@ -4065,9 +3948,6 @@ static int auto_attach(struct comedi_device *dev,
|
||||
devpriv->local1_iobase = ((uint32_t)devpriv->dio_counter_phys_iobase &
|
||||
~local_range) | local_decode;
|
||||
|
||||
DEBUG_PRINT(" local 0 io addr 0x%x\n", devpriv->local0_iobase);
|
||||
DEBUG_PRINT(" local 1 io addr 0x%x\n", devpriv->local1_iobase);
|
||||
|
||||
retval = alloc_and_init_dma_members(dev);
|
||||
if (retval < 0)
|
||||
return retval;
|
||||
|
||||
Loading…
Reference in New Issue
Block a user