mirror of
https://github.com/torvalds/linux.git
synced 2024-11-24 21:21:41 +00:00
ARM: dts: at91: add devicetree for the Axentia TSE-850
The Axentia TSE-850 is a SAMA5D3-based device designed to generate FM subcarrier signals. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This commit is contained in:
Peter Rosin
Alexandre Belloni
parent
5347d80655
commit
21dd0ece34
19
Documentation/devicetree/bindings/arm/axentia.txt
Normal file
19
Documentation/devicetree/bindings/arm/axentia.txt
Normal file
@ -0,0 +1,19 @@
|
||||
Device tree bindings for Axentia ARM devices
|
||||
============================================
|
||||
|
||||
Linea CPU module
|
||||
----------------
|
||||
|
||||
Required root node properties:
|
||||
compatible = "axentia,linea",
|
||||
"atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
|
||||
and following the rules from atmel-at91.txt for a sama5d31 SoC.
|
||||
|
||||
|
||||
TSE-850 v3 board
|
||||
----------------
|
||||
|
||||
Required root node properties:
|
||||
compatible = "axentia,tse850v3", "axentia,linea",
|
||||
"atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
|
||||
and following the rules from above for the axentia,linea CPU module.
|
||||
@ -2353,6 +2353,14 @@ S: Maintained
|
||||
F: Documentation/devicetree/bindings/sound/axentia,*
|
||||
F: sound/soc/atmel/tse850-pcm5142.c
|
||||
|
||||
AXENTIA ARM DEVICES
|
||||
M: Peter Rosin <peda@axentia.se>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Maintained
|
||||
F: Documentation/devicetree/bindings/arm/axentia.txt
|
||||
F: arch/arm/boot/dts/at91-linea.dtsi
|
||||
F: arch/arm/boot/dts/at91-tse850-3.dts
|
||||
|
||||
AZ6007 DVB DRIVER
|
||||
M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
||||
M: Mauro Carvalho Chehab <mchehab@kernel.org>
|
||||
|
||||
@ -48,6 +48,7 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
|
||||
at91-kizbox2.dtb \
|
||||
at91-sama5d2_xplained.dtb \
|
||||
at91-sama5d3_xplained.dtb \
|
||||
at91-tse850-3.dtb \
|
||||
sama5d31ek.dtb \
|
||||
sama5d33ek.dtb \
|
||||
sama5d34ek.dtb \
|
||||
|
||||
49
arch/arm/boot/dts/at91-linea.dtsi
Normal file
49
arch/arm/boot/dts/at91-linea.dtsi
Normal file
@ -0,0 +1,49 @@
|
||||
/*
|
||||
* at91-linea.dtsi - Device Tree Include file for the Axentia Linea Module.
|
||||
*
|
||||
* Copyright (C) 2017 Axentia Technologies AB
|
||||
*
|
||||
* Author: Peter Rosin <peda@axentia.se>
|
||||
*
|
||||
* Licensed under GPLv2 or later.
|
||||
*/
|
||||
|
||||
#include "sama5d31.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "axentia,linea",
|
||||
"atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
|
||||
|
||||
memory {
|
||||
reg = <0x20000000 0x4000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&slow_xtal {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
&main_xtal {
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
eeprom@51 {
|
||||
compatible = "st,24c64";
|
||||
reg = <0x51>;
|
||||
pagesize = <32>;
|
||||
};
|
||||
};
|
||||
|
||||
&nand0 {
|
||||
status = "okay";
|
||||
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-mode = "hw";
|
||||
atmel,has-pmecc;
|
||||
atmel,pmecc-cap = <4>;
|
||||
atmel,pmecc-sector-size = <512>;
|
||||
nand-on-flash-bbt;
|
||||
};
|
||||
274
arch/arm/boot/dts/at91-tse850-3.dts
Normal file
274
arch/arm/boot/dts/at91-tse850-3.dts
Normal file
@ -0,0 +1,274 @@
|
||||
/*
|
||||
* at91-tse850-3.dts - Device Tree file for the Axentia TSE-850 3.0 board
|
||||
*
|
||||
* Copyright (C) 2017 Axentia Technologies AB
|
||||
*
|
||||
* Author: Peter Rosin <peda@axentia.se>
|
||||
*
|
||||
* Licensed under GPLv2 or later.
|
||||
*/
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "at91-linea.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Axentia TSE-850 3.0";
|
||||
compatible = "axentia,tse850v3", "axentia,linea",
|
||||
"atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
pinctrl@fffff200 {
|
||||
tse850 {
|
||||
pinctrl_usba_vbus: usba-vbus {
|
||||
atmel,pins =
|
||||
<AT91_PIOC 31
|
||||
AT91_PERIPH_GPIO
|
||||
AT91_PINCTRL_DEGLITCH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
watchdog@fffffe40 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sck: oscillator {
|
||||
compatible = "fixed-clock";
|
||||
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <16000000>;
|
||||
clock-output-names = "sck";
|
||||
};
|
||||
|
||||
reg_3v3: regulator {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "3v3-supply";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
ana: reg-ana {
|
||||
compatible = "pwm-regulator";
|
||||
|
||||
regulator-name = "ANA";
|
||||
|
||||
pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>;
|
||||
pwm-dutycycle-unit = <1000>;
|
||||
pwm-dutycycle-range = <100 1000>;
|
||||
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <20000000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "axentia,tse850-pcm5142";
|
||||
|
||||
axentia,cpu-dai = <&ssc0>;
|
||||
axentia,audio-codec = <&pcm5142>;
|
||||
|
||||
axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>;
|
||||
axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
|
||||
axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>;
|
||||
|
||||
axentia,ana-supply = <&ana>;
|
||||
};
|
||||
|
||||
dac: dpot-dac {
|
||||
compatible = "dpot-dac";
|
||||
vref-supply = <®_3v3>;
|
||||
io-channels = <&dpot 0>;
|
||||
io-channel-names = "dpot";
|
||||
#io-channel-cells = <1>;
|
||||
};
|
||||
|
||||
envelope-detector {
|
||||
compatible = "axentia,tse850-envelope-detector";
|
||||
io-channels = <&dac 0>;
|
||||
io-channel-names = "dac";
|
||||
|
||||
interrupt-parent = <&pioA>;
|
||||
interrupts = <3 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "comp";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
ch1-red {
|
||||
label = "ch-1:red";
|
||||
gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
ch1-green {
|
||||
label = "ch-1:green";
|
||||
gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
ch2-red {
|
||||
label = "ch-2:red";
|
||||
gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
ch2-green {
|
||||
label = "ch-2:green";
|
||||
gpios = <&pioA 20 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
data-red {
|
||||
label = "data:red";
|
||||
gpios = <&pioA 19 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
data-green {
|
||||
label = "data:green";
|
||||
gpios = <&pioA 18 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
alarm-red {
|
||||
label = "alarm:red";
|
||||
gpios = <&pioA 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
alarm-green {
|
||||
label = "alarm:green";
|
||||
gpios = <&pioA 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand0 {
|
||||
at91bootstrap@0 {
|
||||
label = "at91bootstrap";
|
||||
reg = <0x0 0x40000>;
|
||||
};
|
||||
|
||||
barebox@40000 {
|
||||
label = "bootloader";
|
||||
reg = <0x40000 0x60000>;
|
||||
};
|
||||
|
||||
bareboxenv@c0000 {
|
||||
label = "bareboxenv";
|
||||
reg = <0xc0000 0x40000>;
|
||||
};
|
||||
|
||||
bareboxenv2@100000 {
|
||||
label = "bareboxenv2";
|
||||
reg = <0x100000 0x40000>;
|
||||
};
|
||||
|
||||
oftree@180000 {
|
||||
label = "oftree";
|
||||
reg = <0x180000 0x20000>;
|
||||
};
|
||||
|
||||
kernel@200000 {
|
||||
label = "kernel";
|
||||
reg = <0x200000 0x500000>;
|
||||
};
|
||||
|
||||
rootfs@800000 {
|
||||
label = "rootfs";
|
||||
reg = <0x800000 0x0f800000>;
|
||||
};
|
||||
|
||||
ovlfs@10000000 {
|
||||
label = "ovlfs";
|
||||
reg = <0x10000000 0x10000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&ssc0 {
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
jc42@18 {
|
||||
compatible = "nxp,se97b", "jedec,jc-42.4-temp";
|
||||
reg = <0x18>;
|
||||
};
|
||||
|
||||
dpot: mcp4651-104@28 {
|
||||
compatible = "microchip,mcp4651-104";
|
||||
reg = <0x28>;
|
||||
#io-channel-cells = <1>;
|
||||
};
|
||||
|
||||
pcm5142: pcm5142@4c {
|
||||
compatible = "ti,pcm5142";
|
||||
|
||||
reg = <0x4c>;
|
||||
|
||||
AVDD-supply = <®_3v3>;
|
||||
DVDD-supply = <®_3v3>;
|
||||
CPVDD-supply = <®_3v3>;
|
||||
|
||||
clocks = <&sck>;
|
||||
|
||||
pll-in = <3>;
|
||||
pll-out = <6>;
|
||||
};
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "nxp,24c02";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
};
|
||||
|
||||
&usart0 {
|
||||
status = "okay";
|
||||
|
||||
atmel,use-dma-rx;
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&pinctrl_pwm0_pwml2_1>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&macb1 {
|
||||
status = "okay";
|
||||
|
||||
phy-mode = "rgmii";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
phy0: ethernet-phy@3 {
|
||||
reg = <3>;
|
||||
|
||||
interrupt-parent = <&pioE>;
|
||||
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usba_vbus>;
|
||||
atmel,vbus-gpio = <&pioC 31 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
|
||||
num-ports = <1>;
|
||||
atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
|
||||
atmel,oc-gpio = <&pioC 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dbgu {
|
||||
status = "okay";
|
||||
|
||||
dmas = <0>, <0>; /* Do not use DMA for dbgu */
|
||||
};
|
||||
Loading…
Reference in New Issue
Block a user