Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-24 05:02:12 +00:00
Code Issues Packages Projects Releases Wiki Activity

Power: Reset: Generalize qnap-poweroff to work on Synology devices.

Browse Source 
The Synology NAS devices use a very similar mechanism to QNAP NAS
devices to power off. Both send a single charactor command to a PIC,
over the second serial port. However the baud rate and the command
differ. Generalize the driver to support this.

Signed-off-by: Ben Peddell <klightspeed@killerwolves.net>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This commit is contained in:
Andrew Lunn 2014-02-20 06:02:35 +10:00 committed by Jason Cooper
parent ff1f0018cf
commit 200c0a3e40
2 changed files with 41 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
Documentation/devicetree/bindings/power_supply/qnap-poweroff.txt
View File

@ -6,8 +6,11 @@ Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the
microcontroller to turn the power off. This driver adds a handler to
pm_power_off which is called to turn the power off.
Synology NAS devices use a similar scheme, but a different baud rate,
9600, and a different character, '1'.
Required Properties:
- compatible: Should be "qnap,power-off"
- compatible: Should be "qnap,power-off" or "synology,power-off"
- reg: Address and length of the register set for UART1
- clocks: tclk clock

49
drivers/power/reset/qnap-poweroff.c
View File

@ -1,5 +1,5 @@
/*
* QNAP Turbo NAS Board power off
* QNAP Turbo NAS Board power off. Can also be used on Synology devices.
*
* Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch>
*
@ -25,17 +25,43 @@
#define UART1_REG(x) (base + ((UART_##x) << 2))
struct power_off_cfg {
u32 baud;
char cmd;
};
static const struct power_off_cfg qnap_power_off_cfg = {
.baud = 19200,
.cmd = 'A',
};
static const struct power_off_cfg synology_power_off_cfg = {
.baud = 9600,
.cmd = '1',
};
static const struct of_device_id qnap_power_off_of_match_table[] = {
{ .compatible = "qnap,power-off",
.data = &qnap_power_off_cfg,
},
{ .compatible = "synology,power-off",
.data = &synology_power_off_cfg,
},
{}
};
MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
static void __iomem *base;
static unsigned long tclk;
static const struct power_off_cfg *cfg;
static void qnap_power_off(void)
{
/* 19200 baud divisor */
const unsigned divisor = ((tclk + (8 * 19200)) / (16 * 19200));
const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud));
pr_err("%s: triggering power-off...\n", __func__);
/* hijack UART1 and reset into sane state (19200,8n1) */
/* hijack UART1 and reset into sane state */
writel(0x83, UART1_REG(LCR));
writel(divisor & 0xff, UART1_REG(DLL));
writel((divisor >> 8) & 0xff, UART1_REG(DLM));
@ -44,16 +70,21 @@ static void qnap_power_off(void)
writel(0x00, UART1_REG(FCR));
writel(0x00, UART1_REG(MCR));
/* send the power-off command 'A' to PIC */
writel('A', UART1_REG(TX));
/* send the power-off command to PIC */
writel(cfg->cmd, UART1_REG(TX));
}
static int qnap_power_off_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct resource *res;
struct clk *clk;
char symname[KSYM_NAME_LEN];
const struct of_device_id *match =
of_match_node(qnap_power_off_of_match_table, np);
cfg = match->data;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Missing resource");
@ -94,12 +125,6 @@ static int qnap_power_off_remove(struct platform_device *pdev)
return 0;
}
static const struct of_device_id qnap_power_off_of_match_table[] = {
{ .compatible = "qnap,power-off", },
{}
};
MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
static struct platform_driver qnap_power_off_driver = {
.probe = qnap_power_off_probe,
.remove = qnap_power_off_remove,