Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-24 21:21:41 +00:00
Code Issues Packages Projects Releases Wiki Activity

ARM: SoC DT and driver fixes 6.2

Browse Source 
Lots of dts fixes for Qualcomm Snapdragon and NXP i.MX platforms,
 including:
 
  - A regression fix for SDHCI controllers on Inforce 6540, and
    another SDHCI fix on SM8350
 
  - Reenable cluster idle on sm8250 after the the code fix is upstream
 
  - multiple fixes for the QMP PHY binding, needing an incompatible
    dt change
 
  - The reserved memory map is updated on Xiaomi Mi 4C and Huawei Nexus
    6P, to avoid instabilities caused by use of protected memory regions
 
  - Fix i.MX8MP DT for missing GPC Interrupt, power-domain typo and USB
    clock error
 
  - A couple of verdin-imx8mm DT fixes for audio playback support
 
  - Fix pca9547 i2c-mux node name for i.MX and Vybrid device trees
 
  - Fix an imx93-11x11-evk uSDHC pad setting problem that causes Micron
    eMMC CMD8 CRC error in HS400ES/HS400 mode
 
 The remaining ARM and RISC-V platforms only have very few
 smaller dts bugfixes this time:
 
  - A fix for the SiFive unmatched board's PCI memory space
 
  - A revert to fix a regression with GPIO on Marvell Armada
 
  - A fix for the UART address on Marvell AC5
 
  - Missing chip-select phandles for stm32 boards
 
  - Selecting the correct clock for the sam9x60 memory controller
 
  - Amlogic based Odroid-HC4 needs a revert to restore USB
    functionality.
 
 And finally, there are some minor code fixes:
 
  - Build fixes for OMAP1, pxa, riscpc, raspberry pi firmware, and zynq
    firmware
 
  - memory controller driver fixes for an OMAP regression and older bugs
    on tegra, atmel and mvebu
 
  - reset controller fixes for ti-sci and uniphier platforms
 
  - ARM SCMI firmware fixes for a couple of rare corner cases
 
  - Qualcomm platform driver fixes for incorrect error handling and a
    backwards compatibility fix for the apr driver using older dtb
 
  - NXP i.MX SoC driver fixes for HDMI output, error handling in the imx8
    soc-id and missing reference counting on older cpuid code
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmPKahwACgkQmmx57+YA
 GNnxcA//YBkeRJfseYQoe9OyfkWOVDUIImffhuL+sl6wdEPKHDzqwiVBloMR9GXj
 e6g+Qc4OWSHtTozrmIBHbMh41CKTXr+76XYeJwZXxb6VOkAwbJyom9BOsyO8V9oQ
 hrnjeqMgHA8VrsP5EFkE8QAEK+ptyiYlPdQdWncqBJn4552xd95P1De3AOsUsjef
 Rr/VanMpS2jLuPsTZsR7mT3RmbDbrYCGua84tXihqtfz/4Eqsr9OCKrMnkZbEQty
 ehxN1qAOnx7fTr7r/FJFupWN7MPaOEuwYyjQY/cuTlPSt1sq1re7YII6CC5y1wGS
 eFOc/m689GvACfCW8bQIVdXcRKcYFKJOK1XvA9168QupCd+cDmuKmu0VdKLCGgTd
 9fzbvYfqhXcG8wXKvDPDw2GlMvItxjJ3kzGmHaDU33c+h9Ep9u9C/Jsf/mKYo8E6
 TsOAgkl1pU23cuETATi2BXx/HdH8cHUVX1ssuqiGJeVGLF+hsJuEAMS5wKexBnJ0
 pVrknInSli7s4qPcVe0GYpULGRxT/FYEEeCBgl9WppkhUaU3h1Pwo2SstL6tdTwE
 2vMCEi8HdQuWccxoGMEG1nE1/de2Rxv7bcefVHQTpofv47kDOlnjlIoFy9nCCVaF
 fDGbMK3ArpTUNscDBs9d81U3r26/8him36H+QRvWfb7zI7DryxU=
 =W7dq
 -----END PGP SIGNATURE-----

Merge tag 'soc-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC DT and driver fixes from Arnd Bergmann:
 "Lots of dts fixes for Qualcomm Snapdragon and NXP i.MX platforms,
  including:

   - A regression fix for SDHCI controllers on Inforce 6540, and another
     SDHCI fix on SM8350

   - Reenable cluster idle on sm8250 after the the code fix is upstream

   - multiple fixes for the QMP PHY binding, needing an incompatible dt
     change

   - The reserved memory map is updated on Xiaomi Mi 4C and Huawei Nexus
     6P, to avoid instabilities caused by use of protected memory
     regions

   - Fix i.MX8MP DT for missing GPC Interrupt, power-domain typo and USB
     clock error

   - A couple of verdin-imx8mm DT fixes for audio playback support

   - Fix pca9547 i2c-mux node name for i.MX and Vybrid device trees

   - Fix an imx93-11x11-evk uSDHC pad setting problem that causes Micron
     eMMC CMD8 CRC error in HS400ES/HS400 mode

  The remaining ARM and RISC-V platforms only have very few smaller dts
  bugfixes this time:

   - A fix for the SiFive unmatched board's PCI memory space

   - A revert to fix a regression with GPIO on Marvell Armada

   - A fix for the UART address on Marvell AC5

   - Missing chip-select phandles for stm32 boards

   - Selecting the correct clock for the sam9x60 memory controller

   - Amlogic based Odroid-HC4 needs a revert to restore USB
     functionality.

  And finally, there are some minor code fixes:

   - Build fixes for OMAP1, pxa, riscpc, raspberry pi firmware, and zynq
     firmware

   - memory controller driver fixes for an OMAP regression and older
     bugs on tegra, atmel and mvebu

   - reset controller fixes for ti-sci and uniphier platforms

   - ARM SCMI firmware fixes for a couple of rare corner cases

   - Qualcomm platform driver fixes for incorrect error handling and a
     backwards compatibility fix for the apr driver using older dtb

   - NXP i.MX SoC driver fixes for HDMI output, error handling in the
     imx8 soc-id and missing reference counting on older cpuid code"

* tag 'soc-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (60 commits)
  firmware: zynqmp: fix declarations for gcc-13
  ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp151a-prtt1l
  ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp157c-emstamp-argon
  ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcom-som
  ARM: dts: stm32: Fix qspi pinctrl phandle for stm32mp15xx-dhcor-som
  ARM: dts: at91: sam9x60: fix the ddr clock for sam9x60
  ARM: omap1: fix building gpio15xx
  ARM: omap1: fix !ARCH_OMAP1_ANY link failures
  firmware: raspberrypi: Fix type assignment
  arm64: dts: qcom: msm8992-libra: Fix the memory map
  arm64: dts: qcom: msm8992: Don't use sfpb mutex
  PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe()
  arm64: dts: msm8994-angler: fix the memory map
  arm64: dts: marvell: AC5/AC5X: Fix address for UART1
  ARM: footbridge: drop unnecessary inclusion
  Revert "ARM: dts: armada-39x: Fix compatible string for gpios"
  Revert "ARM: dts: armada-38x: Fix compatible string for gpios"
  ARM: pxa: enable PXA310/PXA320 for DT-only build
  riscv: dts: sifive: fu740: fix size of pcie 32bit memory
  soc: qcom: apr: Make qcom,protection-domain optional again
  ...
This commit is contained in:
Linus Torvalds 2023-01-20 11:00:03 -08:00
commit 1ed46384f8
78 changed files with 265 additions and 289 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml
View File

@ -39,8 +39,8 @@ properties:
qcom,protection-domain:
$ref: /schemas/types.yaml#/definitions/string-array
description: |
Protection domain service name and path for APR service
possible values are::
Protection domain service name and path for APR service (if supported).
Possible values are::
"avs/audio", "msm/adsp/audio_pd".
"kernel/elf_loader", "msm/modem/wlan_pd".
"tms/servreg", "msm/adsp/audio_pd".
@ -49,6 +49,5 @@ properties:
required:
- reg
- qcom,protection-domain
additionalProperties: true

4
arch/arm/boot/dts/armada-38x.dtsi
View File

@ -304,7 +304,7 @@
};
gpio0: gpio@18100 {
compatible = "marvell,armadaxp-gpio",
compatible = "marvell,armada-370-gpio",
"marvell,orion-gpio";
reg = <0x18100 0x40>, <0x181c0 0x08>;
reg-names = "gpio", "pwm";
@ -323,7 +323,7 @@
};
gpio1: gpio@18140 {
compatible = "marvell,armadaxp-gpio",
compatible = "marvell,armada-370-gpio",
"marvell,orion-gpio";
reg = <0x18140 0x40>, <0x181c8 0x08>;
reg-names = "gpio", "pwm";

4
arch/arm/boot/dts/armada-39x.dtsi
View File

@ -213,7 +213,7 @@
};
gpio0: gpio@18100 {
compatible = "marvell,armadaxp-gpio", "marvell,orion-gpio";
compatible = "marvell,orion-gpio";
reg = <0x18100 0x40>;
ngpios = <32>;
gpio-controller;
@ -227,7 +227,7 @@
};
gpio1: gpio@18140 {
compatible = "marvell,armadaxp-gpio", "marvell,orion-gpio";
compatible = "marvell,orion-gpio";
reg = <0x18140 0x40>;
ngpios = <28>;
gpio-controller;

2
arch/arm/boot/dts/imx53-ppd.dts
View File

@ -488,7 +488,7 @@
scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
status = "okay";
i2c-switch@70 {
i2c-mux@70 {
compatible = "nxp,pca9547";
#address-cells = <1>;
#size-cells = <0>;

1
arch/arm/boot/dts/imx6qdl-gw560x.dtsi
View File

@ -632,7 +632,6 @@
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
uart-has-rtscts;
rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
status = "okay";
};

2
arch/arm/boot/dts/imx6ul-pico-dwarf.dts
View File

@ -32,7 +32,7 @@
};
&i2c2 {
clock_frequency = <100000>;
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";

4
arch/arm/boot/dts/imx7d-pico-dwarf.dts
View File

@ -32,7 +32,7 @@
};
&i2c1 {
clock_frequency = <100000>;
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
@ -52,7 +52,7 @@
};
&i2c4 {
clock_frequency = <100000>;
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";

4
arch/arm/boot/dts/imx7d-pico-nymph.dts
View File

@ -43,7 +43,7 @@
};
&i2c1 {
clock_frequency = <100000>;
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
@ -64,7 +64,7 @@
};
&i2c2 {
clock_frequency = <100000>;
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";

22
arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
View File

@ -19,16 +19,16 @@
serial@f995e000 {
status = "okay";
};
sdhci@f9824900 {
bus-width = <8>;
non-removable;
status = "okay";
};
sdhci@f98a4900 {
cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
bus-width = <4>;
};
};
};
&sdhc_1 {
bus-width = <8>;
non-removable;
status = "okay";
};
&sdhc_2 {
cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
bus-width = <4>;
};

4
arch/arm/boot/dts/qcom-apq8084.dtsi
View File

@ -421,7 +421,7 @@
status = "disabled";
};
mmc@f9824900 {
sdhc_1: mmc@f9824900 {
compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
reg-names = "hc", "core";
@ -434,7 +434,7 @@
status = "disabled";
};
mmc@f98a4900 {
sdhc_2: mmc@f98a4900 {
compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
reg-names = "hc", "core";

2
arch/arm/boot/dts/sam9x60.dtsi
View File

@ -564,7 +564,7 @@
mpddrc: mpddrc@ffffe800 {
compatible = "microchip,sam9x60-ddramc", "atmel,sama5d3-ddramc";
reg = <0xffffe800 0x200>;
clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>;
clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>;
clock-names = "ddrck", "mpddr";
};

8
arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
View File

@ -101,8 +101,12 @@
&qspi {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
pinctrl-0 = <&qspi_clk_pins_a
&qspi_bk1_pins_a
&qspi_cs1_pins_a>;
pinctrl-1 = <&qspi_clk_sleep_pins_a
&qspi_bk1_sleep_pins_a
&qspi_cs1_sleep_pins_a>;
reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
#address-cells = <1>;
#size-cells = <0>;

8
arch/arm/boot/dts/stm32mp157c-emstamp-argon.dtsi
View File

@ -391,8 +391,12 @@
&qspi {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
pinctrl-0 = <&qspi_clk_pins_a
&qspi_bk1_pins_a
&qspi_cs1_pins_a>;
pinctrl-1 = <&qspi_clk_sleep_pins_a
&qspi_bk1_sleep_pins_a
&qspi_cs1_sleep_pins_a>;
reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
#address-cells = <1>;
#size-cells = <0>;

8
arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
View File

@ -428,8 +428,12 @@
&qspi {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
pinctrl-0 = <&qspi_clk_pins_a
&qspi_bk1_pins_a
&qspi_cs1_pins_a>;
pinctrl-1 = <&qspi_clk_sleep_pins_a
&qspi_bk1_sleep_pins_a
&qspi_cs1_sleep_pins_a>;
reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
#address-cells = <1>;
#size-cells = <0>;

8
arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
View File

@ -247,8 +247,12 @@
&qspi {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
pinctrl-0 = <&qspi_clk_pins_a
&qspi_bk1_pins_a
&qspi_cs1_pins_a>;
pinctrl-1 = <&qspi_clk_sleep_pins_a
&qspi_bk1_sleep_pins_a
&qspi_cs1_sleep_pins_a>;
reg = <0x58003000 0x1000>, <0x70000000 0x200000>;
#address-cells = <1>;
#size-cells = <0>;

2
arch/arm/boot/dts/vf610-zii-dev-rev-b.dts
View File

@ -345,7 +345,7 @@
};
&i2c2 {
tca9548@70 {
i2c-mux@70 {
compatible = "nxp,pca9548";
pinctrl-0 = <&pinctrl_i2c_mux_reset>;
pinctrl-names = "default";

2
arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
View File

@ -340,7 +340,7 @@
};
&i2c2 {
tca9548@70 {
i2c-mux@70 {
compatible = "nxp,pca9548";
pinctrl-0 = <&pinctrl_i2c_mux_reset>;
pinctrl-names = "default";

1
arch/arm/mach-footbridge/isa-rtc.c
View File

@ -20,7 +20,6 @@
#include <linux/init.h>
#include <linux/mc146818rtc.h>
#include <linux/bcd.h>
#include <linux/io.h>
#include "common.h"

1
arch/arm/mach-imx/cpu-imx25.c
View File

@ -23,6 +23,7 @@ static int mx25_read_cpu_rev(void)
np = of_find_compatible_node(NULL, NULL, "fsl,imx25-iim");
iim_base = of_iomap(np, 0);
of_node_put(np);
BUG_ON(!iim_base);
rev = readl(iim_base + MXC_IIMSREV);
iounmap(iim_base);

1
arch/arm/mach-imx/cpu-imx27.c
View File

@ -28,6 +28,7 @@ static int mx27_read_cpu_rev(void)
np = of_find_compatible_node(NULL, NULL, "fsl,imx27-ccm");
ccm_base = of_iomap(np, 0);
of_node_put(np);
BUG_ON(!ccm_base);
/*
* now we have access to the IO registers. As we need

1
arch/arm/mach-imx/cpu-imx31.c
View File

@ -39,6 +39,7 @@ static int mx31_read_cpu_rev(void)
np = of_find_compatible_node(NULL, NULL, "fsl,imx31-iim");
iim_base = of_iomap(np, 0);
of_node_put(np);
BUG_ON(!iim_base);
/* read SREV register from IIM module */

1
arch/arm/mach-imx/cpu-imx35.c
View File

@ -21,6 +21,7 @@ static int mx35_read_cpu_rev(void)
np = of_find_compatible_node(NULL, NULL, "fsl,imx35-iim");
iim_base = of_iomap(np, 0);
of_node_put(np);
BUG_ON(!iim_base);
rev = imx_readl(iim_base + MXC_IIMSREV);

1
arch/arm/mach-imx/cpu-imx5.c
View File

@ -28,6 +28,7 @@ static u32 imx5_read_srev_reg(const char *compat)
np = of_find_compatible_node(NULL, NULL, compat);
iim_base = of_iomap(np, 0);
of_node_put(np);
WARN_ON(!iim_base);
srev = readl(iim_base + IIM_SREV) & 0xff;

5
arch/arm/mach-omap1/Kconfig
View File

@ -4,6 +4,7 @@ menuconfig ARCH_OMAP1
depends on ARCH_MULTI_V4T || ARCH_MULTI_V5
depends on CPU_LITTLE_ENDIAN
depends on ATAGS
select ARCH_OMAP
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_OMAP
select CLKSRC_MMIO
@ -45,10 +46,6 @@ config ARCH_OMAP16XX
select CPU_ARM926T
select OMAP_DM_TIMER
config ARCH_OMAP1_ANY
select ARCH_OMAP
def_bool ARCH_OMAP730 || ARCH_OMAP850 || ARCH_OMAP15XX || ARCH_OMAP16XX
config ARCH_OMAP
bool

4
arch/arm/mach-omap1/Makefile
View File

@ -3,8 +3,6 @@
# Makefile for the linux kernel.
#
ifdef CONFIG_ARCH_OMAP1_ANY
# Common support
obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
serial.o devices.o dma.o omap-dma.o fb.o
@ -59,5 +57,3 @@ obj-$(CONFIG_ARCH_OMAP730) += gpio7xx.o
obj-$(CONFIG_ARCH_OMAP850) += gpio7xx.o
obj-$(CONFIG_ARCH_OMAP15XX) += gpio15xx.o
obj-$(CONFIG_ARCH_OMAP16XX) += gpio16xx.o
endif

1
arch/arm/mach-omap1/gpio15xx.c
View File

@ -11,6 +11,7 @@
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/soc/ti/omap1-soc.h>
#include <asm/irq.h>
#include "irqs.h"

32
arch/arm/mach-omap1/io.c
View File

@ -22,17 +22,14 @@
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
*/
static struct map_desc omap_io_desc[] __initdata = {
#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
static struct map_desc omap7xx_io_desc[] __initdata = {
{
.virtual = OMAP1_IO_VIRT,
.pfn = __phys_to_pfn(OMAP1_IO_PHYS),
.length = OMAP1_IO_SIZE,
.type = MT_DEVICE
}
};
#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
static struct map_desc omap7xx_io_desc[] __initdata = {
},
{
.virtual = OMAP7XX_DSP_BASE,
.pfn = __phys_to_pfn(OMAP7XX_DSP_START),
@ -49,6 +46,12 @@ static struct map_desc omap7xx_io_desc[] __initdata = {
#ifdef CONFIG_ARCH_OMAP15XX
static struct map_desc omap1510_io_desc[] __initdata = {
{
.virtual = OMAP1_IO_VIRT,
.pfn = __phys_to_pfn(OMAP1_IO_PHYS),
.length = OMAP1_IO_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP1510_DSP_BASE,
.pfn = __phys_to_pfn(OMAP1510_DSP_START),
@ -65,6 +68,12 @@ static struct map_desc omap1510_io_desc[] __initdata = {
#if defined(CONFIG_ARCH_OMAP16XX)
static struct map_desc omap16xx_io_desc[] __initdata = {
{
.virtual = OMAP1_IO_VIRT,
.pfn = __phys_to_pfn(OMAP1_IO_PHYS),
.length = OMAP1_IO_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP16XX_DSP_BASE,
.pfn = __phys_to_pfn(OMAP16XX_DSP_START),
@ -79,18 +88,9 @@ static struct map_desc omap16xx_io_desc[] __initdata = {
};
#endif
/*
* Maps common IO regions for omap1
*/
static void __init omap1_map_common_io(void)
{
iotable_init(omap_io_desc, ARRAY_SIZE(omap_io_desc));
}
#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
void __init omap7xx_map_io(void)
{
omap1_map_common_io();
iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
}
#endif
@ -98,7 +98,6 @@ void __init omap7xx_map_io(void)
#ifdef CONFIG_ARCH_OMAP15XX
void __init omap15xx_map_io(void)
{
omap1_map_common_io();
iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
}
#endif
@ -106,7 +105,6 @@ void __init omap15xx_map_io(void)
#if defined(CONFIG_ARCH_OMAP16XX)
void __init omap16xx_map_io(void)
{
omap1_map_common_io();
iotable_init(omap16xx_io_desc, ARRAY_SIZE(omap16xx_io_desc));
}
#endif

21
arch/arm/mach-omap1/mcbsp.c
View File

@ -89,7 +89,6 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
#define OMAP1610_MCBSP2_BASE 0xfffb1000
#define OMAP1610_MCBSP3_BASE 0xe1017000
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
struct resource omap7xx_mcbsp_res[][6] = {
{
{
@ -159,14 +158,7 @@ static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = {
};
#define OMAP7XX_MCBSP_RES_SZ ARRAY_SIZE(omap7xx_mcbsp_res[1])
#define OMAP7XX_MCBSP_COUNT ARRAY_SIZE(omap7xx_mcbsp_res)
#else
#define omap7xx_mcbsp_res_0 NULL
#define omap7xx_mcbsp_pdata NULL
#define OMAP7XX_MCBSP_RES_SZ 0
#define OMAP7XX_MCBSP_COUNT 0
#endif
#ifdef CONFIG_ARCH_OMAP15XX
struct resource omap15xx_mcbsp_res[][6] = {
{
{
@ -266,14 +258,7 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = {
};
#define OMAP15XX_MCBSP_RES_SZ ARRAY_SIZE(omap15xx_mcbsp_res[1])
#define OMAP15XX_MCBSP_COUNT ARRAY_SIZE(omap15xx_mcbsp_res)
#else
#define omap15xx_mcbsp_res_0 NULL
#define omap15xx_mcbsp_pdata NULL
#define OMAP15XX_MCBSP_RES_SZ 0
#define OMAP15XX_MCBSP_COUNT 0
#endif
#ifdef CONFIG_ARCH_OMAP16XX
struct resource omap16xx_mcbsp_res[][6] = {
{
{
@ -373,12 +358,6 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
};
#define OMAP16XX_MCBSP_RES_SZ ARRAY_SIZE(omap16xx_mcbsp_res[1])
#define OMAP16XX_MCBSP_COUNT ARRAY_SIZE(omap16xx_mcbsp_res)
#else
#define omap16xx_mcbsp_res_0 NULL
#define omap16xx_mcbsp_pdata NULL
#define OMAP16XX_MCBSP_RES_SZ 0
#define OMAP16XX_MCBSP_COUNT 0
#endif
static void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
struct omap_mcbsp_platform_data *config, int size)

7
arch/arm/mach-omap1/pm.h
View File

@ -106,13 +106,6 @@
#define OMAP7XX_IDLECT3 0xfffece24
#define OMAP7XX_IDLE_LOOP_REQUEST 0x0C00
#if !defined(CONFIG_ARCH_OMAP730) && \
!defined(CONFIG_ARCH_OMAP850) && \
!defined(CONFIG_ARCH_OMAP15XX) && \
!defined(CONFIG_ARCH_OMAP16XX)
#warning "Power management for this processor not implemented yet"
#endif
#ifndef __ASSEMBLER__
#include <linux/clk.h>

2
arch/arm/mach-pxa/Kconfig
View File

@ -45,6 +45,8 @@ config MACH_PXA27X_DT
config MACH_PXA3XX_DT
bool "Support PXA3xx platforms from device tree"
select CPU_PXA300
select CPU_PXA310
select CPU_PXA320
select PINCTRL
select POWER_SUPPLY
select PXA3xx

8
arch/arm64/boot/dts/amlogic/meson-sm1-odroid-hc4.dts
View File

@ -131,10 +131,6 @@
};
&usb {
phys = <&usb2_phy1>;
phy-names = "usb2-phy1";
};
&usb2_phy0 {
status = "disabled";
phys = <&usb2_phy0>, <&usb2_phy1>;
phy-names = "usb2-phy0", "usb2-phy1";
};

2
arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
View File

@ -110,7 +110,7 @@
&i2c0 {
status = "okay";
pca9547@77 {
i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;

2
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
View File

@ -89,7 +89,7 @@
&i2c0 {
status = "okay";
pca9547@77 {
i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;

2
arch/arm64/boot/dts/freescale/fsl-ls1046a-qds.dts
View File

@ -88,7 +88,7 @@
&i2c0 {
status = "okay";
pca9547@77 {
i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;

2
arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
View File

@ -53,7 +53,7 @@
&i2c0 {
status = "okay";
i2c-switch@77 {
i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;

2
arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
View File

@ -136,7 +136,7 @@
&i2c0 {
status = "okay";
i2c-switch@77 {
i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;

2
arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
View File

@ -245,7 +245,7 @@
&i2c3 {
status = "okay";
i2c-switch@70 {
i2c-mux@70 {
compatible = "nxp,pca9540";
#address-cells = <1>;
#size-cells = <0>;

2
arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
View File

@ -103,7 +103,7 @@
&i2c0 {
status = "okay";
pca9547@77 {
i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;

2
arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
View File

@ -44,7 +44,7 @@
&i2c0 {
status = "okay";
pca9547@75 {
i2c-mux@75 {
compatible = "nxp,pca9547";
reg = <0x75>;
#address-cells = <1>;

2
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
View File

@ -54,7 +54,7 @@
&i2c0 {
status = "okay";
i2c-switch@77 {
i2c-mux@77 {
compatible = "nxp,pca9547";
#address-cells = <1>;
#size-cells = <0>;

4
arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
View File

@ -120,7 +120,7 @@
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_espi2>;
cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
status = "okay";
eeprom@0 {
@ -316,7 +316,7 @@
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82
MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82
MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x41
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x41
>;
};

2
arch/arm64/boot/dts/freescale/imx8mm-data-modul-edm-sbc.dts
View File

@ -275,7 +275,7 @@
compatible = "rohm,bd71847";
reg = <0x4b>;
#clock-cells = <0>;
clocks = <&clk_xtal32k 0>;
clocks = <&clk_xtal32k>;
clock-output-names = "clk-32k-out";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;

2
arch/arm64/boot/dts/freescale/imx8mm-nitrogen-r2.dts
View File

@ -214,7 +214,7 @@
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
i2cmux@70 {
i2c-mux@70 {
compatible = "nxp,pca9540";
reg = <0x70>;
#address-cells = <1>;

1
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
View File

@ -771,6 +771,7 @@
&usbotg2 {
dr_mode = "host";
vbus-supply = <&reg_usb2_vbus>;
over-current-active-low;
status = "okay";
};

1
arch/arm64/boot/dts/freescale/imx8mm-verdin-dahlia.dtsi
View File

@ -9,6 +9,7 @@
simple-audio-card,bitclock-master = <&dailink_master>;
simple-audio-card,format = "i2s";
simple-audio-card,frame-master = <&dailink_master>;
simple-audio-card,mclk-fs = <256>;
simple-audio-card,name = "imx8mm-wm8904";
simple-audio-card,routing =
"Headphone Jack", "HPOUTL",

1
arch/arm64/boot/dts/freescale/imx8mm-verdin-dev.dtsi
View File

@ -11,6 +11,7 @@
simple-audio-card,bitclock-master = <&dailink_master>;
simple-audio-card,format = "i2s";
simple-audio-card,frame-master = <&dailink_master>;
simple-audio-card,mclk-fs = <256>;
simple-audio-card,name = "imx8mm-nau8822";
simple-audio-card,routing =
"Headphones", "LHP",

4
arch/arm64/boot/dts/freescale/imx8mp-evk.dts
View File

@ -36,8 +36,8 @@
pcie0_refclk: pcie0-refclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
#clock-cells = <0>;
clock-frequency = <100000000>;
};
reg_can1_stby: regulator-can1-stby {

10
arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
View File

@ -99,7 +99,6 @@
regulators {
buck1: BUCK1 {
regulator-compatible = "BUCK1";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <2187500>;
regulator-boot-on;
@ -108,7 +107,6 @@
};
buck2: BUCK2 {
regulator-compatible = "BUCK2";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <2187500>;
regulator-boot-on;
@ -119,7 +117,6 @@
};
buck4: BUCK4 {
regulator-compatible = "BUCK4";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
@ -127,7 +124,6 @@
};
buck5: BUCK5 {
regulator-compatible = "BUCK5";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
@ -135,7 +131,6 @@
};
buck6: BUCK6 {
regulator-compatible = "BUCK6";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
@ -143,7 +138,6 @@
};
ldo1: LDO1 {
regulator-compatible = "LDO1";
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@ -151,7 +145,6 @@
};
ldo2: LDO2 {
regulator-compatible = "LDO2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
@ -159,7 +152,6 @@
};
ldo3: LDO3 {
regulator-compatible = "LDO3";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@ -167,13 +159,11 @@
};
ldo4: LDO4 {
regulator-compatible = "LDO4";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
};
ldo5: LDO5 {
regulator-compatible = "LDO5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;

15
arch/arm64/boot/dts/freescale/imx8mp.dtsi
View File

@ -524,6 +524,7 @@
compatible = "fsl,imx8mp-gpc";
reg = <0x303a0000 0x1000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <3>;
@ -590,7 +591,7 @@
reg = <IMX8MP_POWER_DOMAIN_MIPI_PHY2>;
};
pgc_hsiomix: power-domains@17 {
pgc_hsiomix: power-domain@17 {
#power-domain-cells = <0>;
reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>;
clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
@ -1297,7 +1298,7 @@
reg = <0x32f10100 0x8>,
<0x381f0000 0x20>;
clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
<&clk IMX8MP_CLK_USB_ROOT>;
<&clk IMX8MP_CLK_USB_SUSP>;
clock-names = "hsio", "suspend";
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
@ -1310,9 +1311,9 @@
usb_dwc3_0: usb@38100000 {
compatible = "snps,dwc3";
reg = <0x38100000 0x10000>;
clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
clocks = <&clk IMX8MP_CLK_USB_ROOT>,
<&clk IMX8MP_CLK_USB_CORE_REF>,
<&clk IMX8MP_CLK_USB_ROOT>;
<&clk IMX8MP_CLK_USB_SUSP>;
clock-names = "bus_early", "ref", "suspend";
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb3_phy0>, <&usb3_phy0>;
@ -1339,7 +1340,7 @@
reg = <0x32f10108 0x8>,
<0x382f0000 0x20>;
clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
<&clk IMX8MP_CLK_USB_ROOT>;
<&clk IMX8MP_CLK_USB_SUSP>;
clock-names = "hsio", "suspend";
interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
@ -1352,9 +1353,9 @@
usb_dwc3_1: usb@38200000 {
compatible = "snps,dwc3";
reg = <0x38200000 0x10000>;
clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
clocks = <&clk IMX8MP_CLK_USB_ROOT>,
<&clk IMX8MP_CLK_USB_CORE_REF>,
<&clk IMX8MP_CLK_USB_ROOT>;
<&clk IMX8MP_CLK_USB_SUSP>;
clock-names = "bus_early", "ref", "suspend";
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb3_phy1>, <&usb3_phy1>;

4
arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
View File

@ -133,7 +133,7 @@
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
i2cmux@70 {
i2c-mux@70 {
compatible = "nxp,pca9546";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_pca9546>;
@ -216,7 +216,7 @@
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
pca9546: i2cmux@70 {
pca9546: i2c-mux@70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;

4
arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
View File

@ -339,7 +339,7 @@
bus-width = <4>;
non-removable;
no-sd;
no-emmc;
no-mmc;
status = "okay";
brcmf: wifi@1 {
@ -359,7 +359,7 @@
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
bus-width = <4>;
no-sdio;
no-emmc;
no-mmc;
disable-wp;
status = "okay";
};

2
arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
View File

@ -61,7 +61,7 @@
pinctrl-0 = <&pinctrl_lpi2c1 &pinctrl_ioexp_rst>;
status = "okay";
i2c-switch@71 {
i2c-mux@71 {
compatible = "nxp,pca9646", "nxp,pca9546";
#address-cells = <1>;
#size-cells = <0>;

6
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
View File

@ -74,7 +74,7 @@
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX93_PAD_SD1_CLK__USDHC1_CLK 0x17fe
MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe
MX93_PAD_SD1_CMD__USDHC1_CMD 0x13fe
MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe
MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe
@ -84,7 +84,7 @@
MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe
MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe
MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe
MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x17fe
MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe
>;
};
@ -102,7 +102,7 @@
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX93_PAD_SD2_CLK__USDHC2_CLK 0x17fe
MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe
MX93_PAD_SD2_CMD__USDHC2_CMD 0x13fe
MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe
MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe

2
arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
View File

@ -98,7 +98,7 @@
uart1: serial@12100 {
compatible = "snps,dw-apb-uart";
reg = <0x11000 0x100>;
reg = <0x12100 0x100>;
reg-shift = <2>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;

6
arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi
View File

@ -3,6 +3,7 @@
* Copyright (c) 2015, LGE Inc. All rights reserved.
* Copyright (c) 2016, The Linux Foundation. All rights reserved.
* Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com>
* Copyright (c) 2022, Dominik Kobinski <dominikkobinski314@gmail.com>
*/
/dts-v1/;
@ -51,6 +52,11 @@
reg = <0 0x03400000 0 0x1200000>;
no-map;
};
removed_region: reserved@5000000 {
reg = <0 0x05000000 0 0x2200000>;
no-map;
};
};
};

77
arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
View File

@ -11,6 +11,12 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/gpio-keys.h>
/delete-node/ &adsp_mem;
/delete-node/ &audio_mem;
/delete-node/ &mpss_mem;
/delete-node/ &peripheral_region;
/delete-node/ &rmtfs_mem;
/ {
model = "Xiaomi Mi 4C";
compatible = "xiaomi,libra", "qcom,msm8992";
@ -70,25 +76,67 @@
#size-cells = <2>;
ranges;
/* This is for getting crash logs using Android downstream kernels */
memory_hole: hole@6400000 {
reg = <0 0x06400000 0 0x600000>;
no-map;
};
memory_hole2: hole2@6c00000 {
reg = <0 0x06c00000 0 0x2400000>;
no-map;
};
mpss_mem: mpss@9000000 {
reg = <0 0x09000000 0 0x5a00000>;
no-map;
};
tzapp: tzapp@ea00000 {
reg = <0 0x0ea00000 0 0x1900000>;
no-map;
};
mdm_rfsa_mem: mdm-rfsa@ca0b0000 {
reg = <0 0xca0b0000 0 0x10000>;
no-map;
};
rmtfs_mem: rmtfs@ca100000 {
compatible = "qcom,rmtfs-mem";
reg = <0 0xca100000 0 0x180000>;
no-map;
qcom,client-id = <1>;
};
audio_mem: audio@cb400000 {
reg = <0 0xcb000000 0 0x400000>;
no-mem;
};
qseecom_mem: qseecom@cb400000 {
reg = <0 0xcb400000 0 0x1c00000>;
no-mem;
};
adsp_rfsa_mem: adsp-rfsa@cd000000 {
reg = <0 0xcd000000 0 0x10000>;
no-map;
};
sensor_rfsa_mem: sensor-rfsa@cd010000 {
reg = <0 0xcd010000 0 0x10000>;
no-map;
};
ramoops@dfc00000 {
compatible = "ramoops";
reg = <0x0 0xdfc00000 0x0 0x40000>;
reg = <0 0xdfc00000 0 0x40000>;
console-size = <0x10000>;
record-size = <0x10000>;
ftrace-size = <0x10000>;
pmsg-size = <0x20000>;
};
modem_region: modem_region@9000000 {
reg = <0x0 0x9000000 0x0 0x5a00000>;
no-map;
};
tzapp: modem_region@ea00000 {
reg = <0x0 0xea00000 0x0 0x1900000>;
no-map;
};
};
};
@ -130,11 +178,6 @@
status = "okay";
};
&peripheral_region {
reg = <0x0 0x7400000 0x0 0x1c00000>;
no-map;
};
&pm8994_spmi_regulators {
VDD_APC0: s8 {
regulator-min-microvolt = <680000>;

4
arch/arm64/boot/dts/qcom/msm8992.dtsi
View File

@ -37,10 +37,6 @@
compatible = "qcom,rpmcc-msm8992", "qcom,rpmcc";
};
&tcsr_mutex {
compatible = "qcom,sfpb-mutex";
};
&timer {
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,

19
arch/arm64/boot/dts/qcom/msm8994-huawei-angler-rev-101.dts
View File

@ -9,9 +9,6 @@
#include "msm8994.dtsi"
/* Angler's firmware does not report where the memory is allocated */
/delete-node/ &cont_splash_mem;
/ {
model = "Huawei Nexus 6P";
compatible = "huawei,angler", "qcom,msm8994";
@ -28,6 +25,22 @@
chosen {
stdout-path = "serial0:115200n8";
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
tzapp_mem: tzapp@4800000 {
reg = <0 0x04800000 0 0x1900000>;
no-map;
};
removed_region: reserved@6300000 {
reg = <0 0x06300000 0 0xD00000>;
no-map;
};
};
};
&blsp1_uart2 {

83
arch/arm64/boot/dts/qcom/sc8280xp.dtsi
View File

@ -10,6 +10,7 @@
#include <dt-bindings/interconnect/qcom,sc8280xp.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/phy/phy-qcom-qmp.h>
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/thermal/thermal.h>
@ -762,7 +763,7 @@
<0>,
<0>,
<0>,
<&usb_0_ssphy>,
<&usb_0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
<0>,
<0>,
<0>,
@ -770,7 +771,7 @@
<0>,
<0>,
<0>,
<&usb_1_ssphy>,
<&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
<0>,
<0>,
<0>,
@ -1673,42 +1674,26 @@
};
};
usb_0_qmpphy: phy-wrapper@88ec000 {
usb_0_qmpphy: phy@88eb000 {
compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
reg = <0 0x088ec000 0 0x1e4>,
<0 0x088eb000 0 0x40>,
<0 0x088ed000 0 0x1c8>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
reg = <0 0x088eb000 0 0x4000>;
clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB4_EUD_CLKREF_CLK>,
<&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
clock-names = "aux", "ref_clk_src", "ref", "com_aux";
resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
<&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
reset-names = "phy", "common";
<&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
<&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
clock-names = "aux", "ref", "com_aux", "usb3_pipe";
power-domains = <&gcc USB30_PRIM_GDSC>;
status = "disabled";
resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
<&gcc GCC_USB4_DP_PHY_PRIM_BCR>;
reset-names = "phy", "common";
usb_0_ssphy: usb3-phy@88eb400 {
reg = <0 0x088eb400 0 0x100>,
<0 0x088eb600 0 0x3ec>,
<0 0x088ec400 0 0x364>,
<0 0x088eba00 0 0x100>,
<0 0x088ebc00 0 0x3ec>,
<0 0x088ec200 0 0x18>;
#phy-cells = <0>;
#clock-cells = <0>;
clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb0_phy_pipe_clk_src";
};
#clock-cells = <1>;
#phy-cells = <1>;
status = "disabled";
};
usb_1_hsphy: phy@8902000 {
@ -1725,42 +1710,26 @@
status = "disabled";
};
usb_1_qmpphy: phy-wrapper@8904000 {
usb_1_qmpphy: phy@8903000 {
compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
reg = <0 0x08904000 0 0x1e4>,
<0 0x08903000 0 0x40>,
<0 0x08905000 0 0x1c8>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
reg = <0 0x08903000 0 0x4000>;
clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
<&rpmhcc RPMH_CXO_CLK>,
<&gcc GCC_USB4_CLKREF_CLK>,
<&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
clock-names = "aux", "ref_clk_src", "ref", "com_aux";
<&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>,
<&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
clock-names = "aux", "ref", "com_aux", "usb3_pipe";
power-domains = <&gcc USB30_SEC_GDSC>;
resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
<&gcc GCC_USB4_1_DP_PHY_PRIM_BCR>;
reset-names = "phy", "common";
power-domains = <&gcc USB30_SEC_GDSC>;
#clock-cells = <1>;
#phy-cells = <1>;
status = "disabled";
usb_1_ssphy: usb3-phy@8903400 {
reg = <0 0x08903400 0 0x100>,
<0 0x08903600 0 0x3ec>,
<0 0x08904400 0 0x364>,
<0 0x08903a00 0 0x100>,
<0 0x08903c00 0 0x3ec>,
<0 0x08904200 0 0x18>;
#phy-cells = <0>;
#clock-cells = <0>;
clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
clock-names = "pipe0";
clock-output-names = "usb1_phy_pipe_clk_src";
};
};
pmu@9091000 {
@ -1910,7 +1879,7 @@
reg = <0 0x0a600000 0 0xcd00>;
interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x820 0x0>;
phys = <&usb_0_hsphy>, <&usb_0_ssphy>;
phys = <&usb_0_hsphy>, <&usb_0_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
};
};
@ -1964,7 +1933,7 @@
reg = <0 0x0a800000 0 0xcd00>;
interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
iommus = <&apps_smmu 0x860 0x0>;
phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
};
};

1
arch/arm64/boot/dts/qcom/sm8250.dtsi
View File

@ -334,7 +334,6 @@
exit-latency-us = <6562>;
min-residency-us = <9987>;
local-timer-stop;
status = "disabled";
};
};
};

4
arch/arm64/boot/dts/qcom/sm8350.dtsi
View File

@ -2382,8 +2382,8 @@
<&rpmhcc RPMH_CXO_CLK>;
clock-names = "iface", "core", "xo";
resets = <&gcc GCC_SDCC2_BCR>;
interconnects = <&aggre2_noc MASTER_SDCC_2 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_SDCC_2 0>;
interconnects = <&aggre2_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
<&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_SDCC_2>;
interconnect-names = "sdhc-ddr","cpu-sdhc";
iommus = <&apps_smmu 0x4a0 0x0>;
power-domains = <&rpmhpd SM8350_CX>;

2
arch/riscv/boot/dts/sifive/fu740-c000.dtsi
View File

@ -328,7 +328,7 @@
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x60080000 0x0 0x60080000 0x0 0x10000>, /* I/O */
<0x82000000 0x0 0x60090000 0x0 0x60090000 0x0 0xff70000>, /* mem */
<0x82000000 0x0 0x70000000 0x0 0x70000000 0x0 0x1000000>, /* mem */
<0x82000000 0x0 0x70000000 0x0 0x70000000 0x0 0x10000000>, /* mem */
<0xc3000000 0x20 0x00000000 0x20 0x00000000 0x20 0x00000000>; /* mem prefetchable */
num-lanes = <0x8>;
interrupts = <56>, <57>, <58>, <59>, <60>, <61>, <62>, <63>, <64>;

2
drivers/firmware/arm_scmi/driver.c
View File

@ -910,6 +910,8 @@ static int do_xfer(const struct scmi_protocol_handle *ph,
xfer->hdr.protocol_id, xfer->hdr.seq,
xfer->hdr.poll_completion);
/* Clear any stale status */
xfer->hdr.status = SCMI_SUCCESS;
xfer->state = SCMI_XFER_SENT_OK;
/*
* Even though spinlocking is not needed here since no race is possible

9
drivers/firmware/arm_scmi/shmem.c
View File

@ -81,10 +81,11 @@ u32 shmem_read_header(struct scmi_shared_mem __iomem *shmem)
void shmem_fetch_response(struct scmi_shared_mem __iomem *shmem,
struct scmi_xfer *xfer)
{
size_t len = ioread32(&shmem->length);
xfer->hdr.status = ioread32(shmem->msg_payload);
/* Skip the length of header and status in shmem area i.e 8 bytes */
xfer->rx.len = min_t(size_t, xfer->rx.len,
ioread32(&shmem->length) - 8);
xfer->rx.len = min_t(size_t, xfer->rx.len, len > 8 ? len - 8 : 0);
/* Take a copy to the rx buffer.. */
memcpy_fromio(xfer->rx.buf, shmem->msg_payload + 4, xfer->rx.len);
@ -93,8 +94,10 @@ void shmem_fetch_response(struct scmi_shared_mem __iomem *shmem,
void shmem_fetch_notification(struct scmi_shared_mem __iomem *shmem,
size_t max_len, struct scmi_xfer *xfer)
{
size_t len = ioread32(&shmem->length);
/* Skip only the length of header in shmem area i.e 4 bytes */
xfer->rx.len = min_t(size_t, max_len, ioread32(&shmem->length) - 4);
xfer->rx.len = min_t(size_t, max_len, len > 4 ? len - 4 : 0);
/* Take a copy to the rx buffer.. */
memcpy_fromio(xfer->rx.buf, shmem->msg_payload, xfer->rx.len);

7
drivers/firmware/arm_scmi/virtio.c
View File

@ -160,7 +160,6 @@ static void scmi_vio_channel_cleanup_sync(struct scmi_vio_channel *vioch)
}
vioch->shutdown_done = &vioch_shutdown_done;
virtio_break_device(vioch->vqueue->vdev);
if (!vioch->is_rx && vioch->deferred_tx_wq)
/* Cannot be kicked anymore after this...*/
vioch->deferred_tx_wq = NULL;
@ -482,6 +481,12 @@ static int virtio_chan_free(int id, void *p, void *data)
struct scmi_chan_info *cinfo = p;
struct scmi_vio_channel *vioch = cinfo->transport_info;
/*
* Break device to inhibit further traffic flowing while shutting down
* the channels: doing it later holding vioch->lock creates unsafe
* locking dependency chains as reported by LOCKDEP.
*/
virtio_break_device(vioch->vqueue->vdev);
scmi_vio_channel_cleanup_sync(vioch);
scmi_free_channel(cinfo, data, id);

6
drivers/memory/atmel-sdramc.c
View File

@ -47,19 +47,17 @@ static int atmel_ramc_probe(struct platform_device *pdev)
caps = of_device_get_match_data(&pdev->dev);
if (caps->has_ddrck) {
clk = devm_clk_get(&pdev->dev, "ddrck");
clk = devm_clk_get_enabled(&pdev->dev, "ddrck");
if (IS_ERR(clk))
return PTR_ERR(clk);
clk_prepare_enable(clk);
}
if (caps->has_mpddr_clk) {
clk = devm_clk_get(&pdev->dev, "mpddr");
clk = devm_clk_get_enabled(&pdev->dev, "mpddr");
if (IS_ERR(clk)) {
pr_err("AT91 RAMC: couldn't get mpddr clock\n");
return PTR_ERR(clk);
}
clk_prepare_enable(clk);
}
return 0;

3
drivers/memory/mvebu-devbus.c
View File

@ -280,10 +280,9 @@ static int mvebu_devbus_probe(struct platform_device *pdev)
if (IS_ERR(devbus->base))
return PTR_ERR(devbus->base);
clk = devm_clk_get(&pdev->dev, NULL);
clk = devm_clk_get_enabled(&pdev->dev, NULL);
if (IS_ERR(clk))
return PTR_ERR(clk);
clk_prepare_enable(clk);
/*
* Obtain clock period in picoseconds,

3
drivers/memory/omap-gpmc.c
View File

@ -1918,7 +1918,8 @@ int gpmc_cs_program_settings(int cs, struct gpmc_settings *p)
}
}
if (p->wait_pin > gpmc_nr_waitpins) {
if (p->wait_pin != GPMC_WAITPIN_INVALID &&
p->wait_pin > gpmc_nr_waitpins) {
pr_err("%s: invalid wait-pin (%d)\n", __func__, p->wait_pin);
return -EINVAL;
}

36
drivers/memory/tegra/tegra186.c
View File

@ -22,32 +22,6 @@
#define MC_SID_STREAMID_SECURITY_WRITE_ACCESS_DISABLED BIT(16)
#define MC_SID_STREAMID_SECURITY_OVERRIDE BIT(8)
static void tegra186_mc_program_sid(struct tegra_mc *mc)
{
unsigned int i;
for (i = 0; i < mc->soc->num_clients; i++) {
const struct tegra_mc_client *client = &mc->soc->clients[i];
u32 override, security;
override = readl(mc->regs + client->regs.sid.override);
security = readl(mc->regs + client->regs.sid.security);
dev_dbg(mc->dev, "client %s: override: %x security: %x\n",
client->name, override, security);
dev_dbg(mc->dev, "setting SID %u for %s\n", client->sid,
client->name);
writel(client->sid, mc->regs + client->regs.sid.override);
override = readl(mc->regs + client->regs.sid.override);
security = readl(mc->regs + client->regs.sid.security);
dev_dbg(mc->dev, "client %s: override: %x security: %x\n",
client->name, override, security);
}
}
static int tegra186_mc_probe(struct tegra_mc *mc)
{
struct platform_device *pdev = to_platform_device(mc->dev);
@ -85,8 +59,6 @@ populate:
if (err < 0)
return err;
tegra186_mc_program_sid(mc);
return 0;
}
@ -95,13 +67,6 @@ static void tegra186_mc_remove(struct tegra_mc *mc)
of_platform_depopulate(mc->dev);
}
static int tegra186_mc_resume(struct tegra_mc *mc)
{
tegra186_mc_program_sid(mc);
return 0;
}
#if IS_ENABLED(CONFIG_IOMMU_API)
static void tegra186_mc_client_sid_override(struct tegra_mc *mc,
const struct tegra_mc_client *client,
@ -173,7 +138,6 @@ static int tegra186_mc_probe_device(struct tegra_mc *mc, struct device *dev)
const struct tegra_mc_ops tegra186_mc_ops = {
.probe = tegra186_mc_probe,
.remove = tegra186_mc_remove,
.resume = tegra186_mc_resume,
.probe_device = tegra186_mc_probe_device,
.handle_irq = tegra30_mc_handle_irq,
};

2
drivers/reset/Kconfig
View File

@ -257,7 +257,7 @@ config RESET_SUNXI
config RESET_TI_SCI
tristate "TI System Control Interface (TI-SCI) reset driver"
depends on TI_SCI_PROTOCOL || COMPILE_TEST
depends on TI_SCI_PROTOCOL || (COMPILE_TEST && TI_SCI_PROTOCOL=n)
help
This enables the reset driver support over TI System Control Interface
available on some new TI's SoCs. If you wish to use reset resources

4
drivers/reset/reset-uniphier-glue.c
View File

@ -47,7 +47,6 @@ static int uniphier_glue_reset_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct uniphier_glue_reset_priv *priv;
struct resource *res;
resource_size_t size;
int i, ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
@ -60,7 +59,6 @@ static int uniphier_glue_reset_probe(struct platform_device *pdev)
return -EINVAL;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
size = resource_size(res);
priv->rdata.membase = devm_ioremap_resource(dev, res);
if (IS_ERR(priv->rdata.membase))
return PTR_ERR(priv->rdata.membase);
@ -96,7 +94,7 @@ static int uniphier_glue_reset_probe(struct platform_device *pdev)
spin_lock_init(&priv->rdata.lock);
priv->rdata.rcdev.owner = THIS_MODULE;
priv->rdata.rcdev.nr_resets = size * BITS_PER_BYTE;
priv->rdata.rcdev.nr_resets = resource_size(res) * BITS_PER_BYTE;
priv->rdata.rcdev.ops = &reset_simple_ops;
priv->rdata.rcdev.of_node = dev->of_node;
priv->rdata.active_low = true;

7
drivers/soc/imx/imx8mp-blk-ctrl.c
View File

@ -212,7 +212,7 @@ static void imx8mp_hdmi_blk_ctrl_power_on(struct imx8mp_blk_ctrl *bc,
break;
case IMX8MP_HDMIBLK_PD_LCDIF:
regmap_set_bits(bc->regmap, HDMI_RTX_CLK_CTL0,
BIT(7) | BIT(16) | BIT(17) | BIT(18) |
BIT(16) | BIT(17) | BIT(18) |
BIT(19) | BIT(20));
regmap_set_bits(bc->regmap, HDMI_RTX_CLK_CTL1, BIT(11));
regmap_set_bits(bc->regmap, HDMI_RTX_RESET_CTL0,
@ -241,6 +241,7 @@ static void imx8mp_hdmi_blk_ctrl_power_on(struct imx8mp_blk_ctrl *bc,
regmap_set_bits(bc->regmap, HDMI_TX_CONTROL0, BIT(1));
break;
case IMX8MP_HDMIBLK_PD_HDMI_TX_PHY:
regmap_set_bits(bc->regmap, HDMI_RTX_CLK_CTL0, BIT(7));
regmap_set_bits(bc->regmap, HDMI_RTX_CLK_CTL1, BIT(22) | BIT(24));
regmap_set_bits(bc->regmap, HDMI_RTX_RESET_CTL0, BIT(12));
regmap_clear_bits(bc->regmap, HDMI_TX_CONTROL0, BIT(3));
@ -270,7 +271,7 @@ static void imx8mp_hdmi_blk_ctrl_power_off(struct imx8mp_blk_ctrl *bc,
BIT(4) | BIT(5) | BIT(6));
regmap_clear_bits(bc->regmap, HDMI_RTX_CLK_CTL1, BIT(11));
regmap_clear_bits(bc->regmap, HDMI_RTX_CLK_CTL0,
BIT(7) | BIT(16) | BIT(17) | BIT(18) |
BIT(16) | BIT(17) | BIT(18) |
BIT(19) | BIT(20));
break;
case IMX8MP_HDMIBLK_PD_PAI:
@ -298,6 +299,7 @@ static void imx8mp_hdmi_blk_ctrl_power_off(struct imx8mp_blk_ctrl *bc,
case IMX8MP_HDMIBLK_PD_HDMI_TX_PHY:
regmap_set_bits(bc->regmap, HDMI_TX_CONTROL0, BIT(3));
regmap_clear_bits(bc->regmap, HDMI_RTX_RESET_CTL0, BIT(12));
regmap_clear_bits(bc->regmap, HDMI_RTX_CLK_CTL0, BIT(7));
regmap_clear_bits(bc->regmap, HDMI_RTX_CLK_CTL1, BIT(22) | BIT(24));
break;
case IMX8MP_HDMIBLK_PD_HDCP:
@ -590,7 +592,6 @@ static int imx8mp_blk_ctrl_probe(struct platform_device *pdev)
ret = PTR_ERR(domain->power_dev);
goto cleanup_pds;
}
dev_set_name(domain->power_dev, "%s", data->name);
domain->genpd.name = data->name;
domain->genpd.power_on = imx8mp_blk_ctrl_power_on;

4
drivers/soc/imx/soc-imx8m.c
View File

@ -66,8 +66,8 @@ static u32 __init imx8mq_soc_revision(void)
ocotp_base = of_iomap(np, 0);
WARN_ON(!ocotp_base);
clk = of_clk_get_by_name(np, NULL);
if (!clk) {
WARN_ON(!clk);
if (IS_ERR(clk)) {
WARN_ON(IS_ERR(clk));
return 0;
}

3
drivers/soc/qcom/apr.c
View File

@ -461,9 +461,10 @@ static int apr_add_device(struct device *dev, struct device_node *np,
goto out;
}
/* Protection domain is optional, it does not exist on older platforms */
ret = of_property_read_string_index(np, "qcom,protection-domain",
1, &adev->service_path);
if (ret < 0) {
if (ret < 0 && ret != -EINVAL) {
dev_err(dev, "Failed to read second value of qcom,protection-domain\n");
goto out;
}

6
drivers/soc/qcom/cpr.c
View File

@ -1708,12 +1708,16 @@ static int cpr_probe(struct platform_device *pdev)
ret = of_genpd_add_provider_simple(dev->of_node, &drv->pd);
if (ret)
return ret;
goto err_remove_genpd;
platform_set_drvdata(pdev, drv);
cpr_debugfs_init(drv);
return 0;
err_remove_genpd:
pm_genpd_remove(&drv->pd);
return ret;
}
static int cpr_remove(struct platform_device *pdev)

8
include/linux/firmware/xlnx-zynqmp.h
View File

@ -545,8 +545,8 @@ int zynqmp_pm_request_wake(const u32 node,
const u64 address,
const enum zynqmp_pm_request_ack ack);
int zynqmp_pm_get_rpu_mode(u32 node_id, enum rpu_oper_mode *rpu_mode);
int zynqmp_pm_set_rpu_mode(u32 node_id, u32 arg1);
int zynqmp_pm_set_tcm_config(u32 node_id, u32 arg1);
int zynqmp_pm_set_rpu_mode(u32 node_id, enum rpu_oper_mode rpu_mode);
int zynqmp_pm_set_tcm_config(u32 node_id, enum rpu_tcm_comb tcm_mode);
int zynqmp_pm_set_sd_config(u32 node, enum pm_sd_config_type config, u32 value);
int zynqmp_pm_set_gem_config(u32 node, enum pm_gem_config_type config,
u32 value);
@ -845,12 +845,12 @@ static inline int zynqmp_pm_get_rpu_mode(u32 node_id, enum rpu_oper_mode *rpu_mo
return -ENODEV;
}
static inline int zynqmp_pm_set_rpu_mode(u32 node_id, u32 arg1)
static inline int zynqmp_pm_set_rpu_mode(u32 node_id, enum rpu_oper_mode rpu_mode)
{
return -ENODEV;
}
static inline int zynqmp_pm_set_tcm_config(u32 node_id, u32 arg1)
static inline int zynqmp_pm_set_tcm_config(u32 node_id, enum rpu_tcm_comb tcm_mode)
{
return -ENODEV;
}

4
include/linux/soc/ti/omap1-io.h
View File

@ -5,7 +5,7 @@
#ifndef __ASSEMBLER__
#include <linux/types.h>
#ifdef CONFIG_ARCH_OMAP1_ANY
#ifdef CONFIG_ARCH_OMAP1
/*
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
*/
@ -15,7 +15,7 @@ extern u32 omap_readl(u32 pa);
extern void omap_writeb(u8 v, u32 pa);
extern void omap_writew(u16 v, u32 pa);
extern void omap_writel(u32 v, u32 pa);
#else
#elif defined(CONFIG_COMPILE_TEST)
static inline u8 omap_readb(u32 pa) { return 0; }
static inline u16 omap_readw(u32 pa) { return 0; }
static inline u32 omap_readl(u32 pa) { return 0; }

2
include/soc/bcm2835/raspberrypi-firmware.h
View File

@ -170,7 +170,7 @@ struct rpi_firmware_clk_rate_request {
#define RPI_FIRMWARE_CLK_RATE_REQUEST(_id) \
{ \
.id = _id, \
.id = cpu_to_le32(_id), \
}
#if IS_ENABLED(CONFIG_RASPBERRYPI_FIRMWARE)