Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-23 03:11:46 +00:00
Code Issues Packages Projects Releases Wiki Activity

ARM: b.L: core switcher code

Browse Source 
This is the core code implementing big.LITTLE switcher functionality.
Rationale for this code is available here:

http://lwn.net/Articles/481055/

The main entry point for a switch request is:

void bL_switch_request(unsigned int cpu, unsigned int new_cluster_id)

If the calling CPU is not the wanted one, this wrapper takes care of
sending the request to the appropriate CPU with schedule_work_on().

At the moment the core switch operation is handled by bL_switch_to()
which must be called on the CPU for which a switch is requested.

What this code does:

  * Return early if the current cluster is the wanted one.

  * Close the gate in the kernel entry vector for both the inbound
    and outbound CPUs.

  * Wake up the inbound CPU so it can perform its reset sequence in
    parallel up to the kernel entry vector gate.

  * Migrate all interrupts in the GIC targeting the outbound CPU
    interface to the inbound CPU interface, including SGIs. This is
    performed by gic_migrate_target() in drivers/irqchip/irq-gic.c.

  * Call cpu_pm_enter() which takes care of flushing the VFP state to
    RAM and save the CPU interface config from the GIC to RAM.

  * Modify the cpu_logical_map to refer to the inbound physical CPU.

  * Call cpu_suspend() which saves the CPU state (general purpose
    registers, page table address) onto the stack and store the
    resulting stack pointer in an array indexed by the updated
    cpu_logical_map, then call the provided shutdown function.
    This happens in arch/arm/kernel/sleep.S.

At this point, the provided shutdown function executed by the outbound
CPU ungates the inbound CPU. Therefore the inbound CPU:

  * Picks up the saved stack pointer in the array indexed by its MPIDR
    in arch/arm/kernel/sleep.S.

  * The MMU and caches are re-enabled using the saved state on the
    provided stack, just like if this was a resume operation from a
    suspended state.

  * Then cpu_suspend() returns, although this is on the inbound CPU
    rather than the outbound CPU which called it initially.

  * The function cpu_pm_exit() is called which effect is to restore the
    CPU interface state in the GIC using the state previously saved by
    the outbound CPU.

  * Exit of bL_switch_to() to resume normal kernel execution on the
    new CPU.

However, the outbound CPU is potentially still running in parallel while
the inbound CPU is resuming normal kernel execution, hence we need
per CPU stack isolation to execute bL_do_switch().  After the outbound
CPU has ungated the inbound CPU, it calls mcpm_cpu_power_down() to:

  * Clean its L1 cache.

  * If it is the last CPU still alive in its cluster (last man standing),
    it also cleans its L2 cache and disables cache snooping from the other
    cluster.

  * Power down the CPU (or whole cluster).

Code called from bL_do_switch() might end up referencing 'current' for
some reasons.  However, 'current' is derived from the stack pointer.
With any arbitrary stack, the returned value for 'current' and any
dereferenced values through it are just random garbage which may lead to
segmentation faults.

The active page table during the execution of bL_do_switch() is also a
problem.  There is no guarantee that the inbound CPU won't destroy the
corresponding task which would free the attached page table while the
outbound CPU is still running and relying on it.

To solve both issues, we borrow some of the task space belonging to
the init/idle task which, by its nature, is lightly used and therefore
is unlikely to clash with our usage.  The init task is also never going
away.

Right now the logical CPU number is assumed to be equivalent to the
physical CPU number within each cluster. The kernel should also be
booted with only one cluster active.  These limitations will be lifted
eventually.

Signed-off-by: Nicolas Pitre <nico@linaro.org>
This commit is contained in:
Nicolas Pitre 2012-04-12 02:56:10 -04:00
parent 1a6b69b654
commit 1c33be5749
4 changed files with 277 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
arch/arm/Kconfig
View File

@ -1538,6 +1538,24 @@ config MCPM
for (multi-)cluster based systems, such as big.LITTLE based
systems.
config BIG_LITTLE
bool "big.LITTLE support (Experimental)"
depends on CPU_V7 && SMP
select MCPM
help
This option enables support selections for the big.LITTLE
system architecture.
config BL_SWITCHER
bool "big.LITTLE switcher support"
depends on BIG_LITTLE && MCPM && HOTPLUG_CPU
select CPU_PM
select ARM_CPU_SUSPEND
help
The big.LITTLE "switcher" provides the core functionality to
transparently handle transition between a cluster of A15's
and a cluster of A7's in a big.LITTLE system.
choice
prompt "Memory split"
default VMSPLIT_3G

1
arch/arm/common/Makefile
View File

@ -17,3 +17,4 @@ obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
AFLAGS_mcpm_head.o := -march=armv7-a
AFLAGS_vlock.o := -march=armv7-a
obj-$(CONFIG_TI_PRIV_EDMA) += edma.o
obj-$(CONFIG_BL_SWITCHER) += bL_switcher.o

241
arch/arm/common/bL_switcher.c Normal file
View File

@ -0,0 +1,241 @@
/*
* arch/arm/common/bL_switcher.c -- big.LITTLE cluster switcher core driver
*
* Created by: Nicolas Pitre, March 2012
* Copyright: (C) 2012-2013 Linaro Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/cpu_pm.h>
#include <linux/workqueue.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/irqchip/arm-gic.h>
#include <asm/smp_plat.h>
#include <asm/suspend.h>
#include <asm/mcpm.h>
#include <asm/bL_switcher.h>
/*
* Use our own MPIDR accessors as the generic ones in asm/cputype.h have
* __attribute_const__ and we don't want the compiler to assume any
* constness here as the value _does_ change along some code paths.
*/
static int read_mpidr(void)
{
unsigned int id;
asm volatile ("mrc p15, 0, %0, c0, c0, 5" : "=r" (id));
return id & MPIDR_HWID_BITMASK;
}
/*
* bL switcher core code.
*/
static void bL_do_switch(void *_unused)
{
unsigned mpidr, cpuid, clusterid, ob_cluster, ib_cluster;
/*
* We now have a piece of stack borrowed from the init task's.
* Let's also switch to init_mm right away to match it.
*/
cpu_switch_mm(init_mm.pgd, &init_mm);
pr_debug("%s\n", __func__);
mpidr = read_mpidr();
cpuid = MPIDR_AFFINITY_LEVEL(mpidr, 0);
clusterid = MPIDR_AFFINITY_LEVEL(mpidr, 1);
ob_cluster = clusterid;
ib_cluster = clusterid ^ 1;
/*
* Our state has been saved at this point. Let's release our
* inbound CPU.
*/
mcpm_set_entry_vector(cpuid, ib_cluster, cpu_resume);
sev();
/*
* From this point, we must assume that our counterpart CPU might
* have taken over in its parallel world already, as if execution
* just returned from cpu_suspend(). It is therefore important to
* be very careful not to make any change the other guy is not
* expecting. This is why we need stack isolation.
*
* Fancy under cover tasks could be performed here. For now
* we have none.
*/
/* Let's put ourself down. */
mcpm_cpu_power_down();
/* should never get here */
BUG();
}
/*
* Stack isolation. To ensure 'current' remains valid, we just borrow
* a slice of the init/idle task which should be fairly lightly used.
* The borrowed area starts just above the thread_info structure located
* at the very bottom of the stack, aligned to a cache line.
*/
#define STACK_SIZE 256
extern void call_with_stack(void (*fn)(void *), void *arg, void *sp);
static int bL_switchpoint(unsigned long _arg)
{
unsigned int mpidr = read_mpidr();
unsigned int cpuid = MPIDR_AFFINITY_LEVEL(mpidr, 0);
unsigned int clusterid = MPIDR_AFFINITY_LEVEL(mpidr, 1);
unsigned int cpu_index = cpuid + clusterid * MAX_CPUS_PER_CLUSTER;
void *stack = &init_thread_info + 1;
stack = PTR_ALIGN(stack, L1_CACHE_BYTES);
stack += cpu_index * STACK_SIZE + STACK_SIZE;
call_with_stack(bL_do_switch, (void *)_arg, stack);
BUG();
}
/*
* Generic switcher interface
*/
/*
* bL_switch_to - Switch to a specific cluster for the current CPU
* @new_cluster_id: the ID of the cluster to switch to.
*
* This function must be called on the CPU to be switched.
* Returns 0 on success, else a negative status code.
*/
static int bL_switch_to(unsigned int new_cluster_id)
{
unsigned int mpidr, cpuid, clusterid, ob_cluster, ib_cluster, this_cpu;
int ret;
mpidr = read_mpidr();
cpuid = MPIDR_AFFINITY_LEVEL(mpidr, 0);
clusterid = MPIDR_AFFINITY_LEVEL(mpidr, 1);
ob_cluster = clusterid;
ib_cluster = clusterid ^ 1;
if (new_cluster_id == clusterid)
return 0;
pr_debug("before switch: CPU %d in cluster %d\n", cpuid, clusterid);
/* Close the gate for our entry vectors */
mcpm_set_entry_vector(cpuid, ob_cluster, NULL);
mcpm_set_entry_vector(cpuid, ib_cluster, NULL);
/*
* Let's wake up the inbound CPU now in case it requires some delay
* to come online, but leave it gated in our entry vector code.
*/
ret = mcpm_cpu_power_up(cpuid, ib_cluster);
if (ret) {
pr_err("%s: mcpm_cpu_power_up() returned %d\n", __func__, ret);
return ret;
}
/*
* From this point we are entering the switch critical zone
* and can't take any interrupts anymore.
*/
local_irq_disable();
local_fiq_disable();
this_cpu = smp_processor_id();
/* redirect GIC's SGIs to our counterpart */
gic_migrate_target(cpuid + ib_cluster*4);
/*
* Raise a SGI on the inbound CPU to make sure it doesn't stall
* in a possible WFI, such as in mcpm_power_down().
*/
arch_send_wakeup_ipi_mask(cpumask_of(this_cpu));
ret = cpu_pm_enter();
/* we can not tolerate errors at this point */
if (ret)
panic("%s: cpu_pm_enter() returned %d\n", __func__, ret);
/* Flip the cluster in the CPU logical map for this CPU. */
cpu_logical_map(this_cpu) ^= (1 << 8);
/* Let's do the actual CPU switch. */
ret = cpu_suspend(0, bL_switchpoint);
if (ret > 0)
panic("%s: cpu_suspend() returned %d\n", __func__, ret);
/* We are executing on the inbound CPU at this point */
mpidr = read_mpidr();
cpuid = MPIDR_AFFINITY_LEVEL(mpidr, 0);
clusterid = MPIDR_AFFINITY_LEVEL(mpidr, 1);
pr_debug("after switch: CPU %d in cluster %d\n", cpuid, clusterid);
BUG_ON(clusterid != ib_cluster);
mcpm_cpu_powered_up();
ret = cpu_pm_exit();
local_fiq_enable();
local_irq_enable();
if (ret)
pr_err("%s exiting with error %d\n", __func__, ret);
return ret;
}
struct switch_args {
unsigned int cluster;
struct work_struct work;
};
static void __bL_switch_to(struct work_struct *work)
{
struct switch_args *args = container_of(work, struct switch_args, work);
bL_switch_to(args->cluster);
}
/*
* bL_switch_request - Switch to a specific cluster for the given CPU
*
* @cpu: the CPU to switch
* @new_cluster_id: the ID of the cluster to switch to.
*
* This function causes a cluster switch on the given CPU. If the given
* CPU is the same as the calling CPU then the switch happens right away.
* Otherwise the request is put on a work queue to be scheduled on the
* remote CPU.
*/
void bL_switch_request(unsigned int cpu, unsigned int new_cluster_id)
{
unsigned int this_cpu = get_cpu();
struct switch_args args;
if (cpu == this_cpu) {
bL_switch_to(new_cluster_id);
put_cpu();
return;
}
put_cpu();
args.cluster = new_cluster_id;
INIT_WORK_ONSTACK(&args.work, __bL_switch_to);
schedule_work_on(cpu, &args.work);
flush_work(&args.work);
}
EXPORT_SYMBOL_GPL(bL_switch_request);

17
arch/arm/include/asm/bL_switcher.h Normal file
View File

@ -0,0 +1,17 @@
/*
* arch/arm/include/asm/bL_switcher.h
*
* Created by: Nicolas Pitre, April 2012
* Copyright: (C) 2012-2013 Linaro Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef ASM_BL_SWITCHER_H
#define ASM_BL_SWITCHER_H
void bL_switch_request(unsigned int cpu, unsigned int new_cluster_id);
#endif