avr32: Fix MIMC200 board use of SPD network pins

The MIMC200 board uses the SPD output pin from the Ethernet MACs for
other purposes.

One of these is as a board-reset, so I've had to #define off the SPD
output pin declaration.

This is probably not the best way of achieving this, but works in the
current framework.

Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
This commit is contained in:
Mark Jackson 2008-10-13 10:46:27 +00:00 committed by Haavard Skinnemoen
parent 45c349b58c
commit 198f29358a

View File

@ -1091,7 +1091,9 @@ at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
pin_mask |= (1 << 11); /* RXD2 */
pin_mask |= (1 << 12); /* RXD3 */
pin_mask |= (1 << 14); /* RXCK */
#ifndef CONFIG_BOARD_MIMC200
pin_mask |= (1 << 18); /* SPD */
#endif
}
select_peripheral(PIOC, pin_mask, PERIPH_A, 0);
@ -1112,8 +1114,10 @@ at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
pin_mask |= (1 << 3); /* MDC */
pin_mask |= (1 << 2); /* MDIO */
#ifndef CONFIG_BOARD_MIMC200
if (!data->is_rmii)
pin_mask |= (1 << 15); /* SPD */
#endif
select_peripheral(PIOD, pin_mask, PERIPH_B, 0);