diff --git a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h index adf7a5c78f85..39be6312b49b 100644 --- a/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h +++ b/drivers/net/ethernet/intel/ice/ice_adminq_cmd.h @@ -2094,78 +2094,6 @@ struct ice_aqc_add_rdma_qset_data { struct ice_aqc_add_tx_rdma_qset_entry rdma_qsets[]; }; -/* Configure Firmware Logging Command (indirect 0xFF09) - * Logging Information Read Response (indirect 0xFF10) - * Note: The 0xFF10 command has no input parameters. - */ -struct ice_aqc_fw_logging { - u8 log_ctrl; -#define ICE_AQC_FW_LOG_AQ_EN BIT(0) -#define ICE_AQC_FW_LOG_UART_EN BIT(1) - u8 rsvd0; - u8 log_ctrl_valid; /* Not used by 0xFF10 Response */ -#define ICE_AQC_FW_LOG_AQ_VALID BIT(0) -#define ICE_AQC_FW_LOG_UART_VALID BIT(1) - u8 rsvd1[5]; - __le32 addr_high; - __le32 addr_low; -}; - -enum ice_aqc_fw_logging_mod { - ICE_AQC_FW_LOG_ID_GENERAL = 0, - ICE_AQC_FW_LOG_ID_CTRL, - ICE_AQC_FW_LOG_ID_LINK, - ICE_AQC_FW_LOG_ID_LINK_TOPO, - ICE_AQC_FW_LOG_ID_DNL, - ICE_AQC_FW_LOG_ID_I2C, - ICE_AQC_FW_LOG_ID_SDP, - ICE_AQC_FW_LOG_ID_MDIO, - ICE_AQC_FW_LOG_ID_ADMINQ, - ICE_AQC_FW_LOG_ID_HDMA, - ICE_AQC_FW_LOG_ID_LLDP, - ICE_AQC_FW_LOG_ID_DCBX, - ICE_AQC_FW_LOG_ID_DCB, - ICE_AQC_FW_LOG_ID_NETPROXY, - ICE_AQC_FW_LOG_ID_NVM, - ICE_AQC_FW_LOG_ID_AUTH, - ICE_AQC_FW_LOG_ID_VPD, - ICE_AQC_FW_LOG_ID_IOSF, - ICE_AQC_FW_LOG_ID_PARSER, - ICE_AQC_FW_LOG_ID_SW, - ICE_AQC_FW_LOG_ID_SCHEDULER, - ICE_AQC_FW_LOG_ID_TXQ, - ICE_AQC_FW_LOG_ID_RSVD, - ICE_AQC_FW_LOG_ID_POST, - ICE_AQC_FW_LOG_ID_WATCHDOG, - ICE_AQC_FW_LOG_ID_TASK_DISPATCH, - ICE_AQC_FW_LOG_ID_MNG, - ICE_AQC_FW_LOG_ID_MAX, -}; - -/* Defines for both above FW logging command/response buffers */ -#define ICE_AQC_FW_LOG_ID_S 0 -#define ICE_AQC_FW_LOG_ID_M (0xFFF << ICE_AQC_FW_LOG_ID_S) - -#define ICE_AQC_FW_LOG_CONF_SUCCESS 0 /* Used by response */ -#define ICE_AQC_FW_LOG_CONF_BAD_INDX BIT(12) /* Used by response */ - -#define ICE_AQC_FW_LOG_EN_S 12 -#define ICE_AQC_FW_LOG_EN_M (0xF << ICE_AQC_FW_LOG_EN_S) -#define ICE_AQC_FW_LOG_INFO_EN BIT(12) /* Used by command */ -#define ICE_AQC_FW_LOG_INIT_EN BIT(13) /* Used by command */ -#define ICE_AQC_FW_LOG_FLOW_EN BIT(14) /* Used by command */ -#define ICE_AQC_FW_LOG_ERR_EN BIT(15) /* Used by command */ - -/* Get/Clear FW Log (indirect 0xFF11) */ -struct ice_aqc_get_clear_fw_log { - u8 flags; -#define ICE_AQC_FW_LOG_CLEAR BIT(0) -#define ICE_AQC_FW_LOG_MORE_DATA_AVAIL BIT(1) - u8 rsvd1[7]; - __le32 addr_high; - __le32 addr_low; -}; - /* Download Package (indirect 0x0C40) */ /* Also used for Update Package (indirect 0x0C41 and 0x0C42) */ struct ice_aqc_download_pkg { @@ -2507,8 +2435,6 @@ struct ice_aq_desc { struct ice_aqc_add_rdma_qset add_rdma_qset; struct ice_aqc_add_get_update_free_vsi vsi_cmd; struct ice_aqc_add_update_free_vsi_resp add_update_free_vsi_res; - struct ice_aqc_fw_logging fw_logging; - struct ice_aqc_get_clear_fw_log get_clear_fw_log; struct ice_aqc_download_pkg download_pkg; struct ice_aqc_set_cgu_input_config set_cgu_input_config; struct ice_aqc_get_cgu_input_config get_cgu_input_config; @@ -2717,10 +2643,6 @@ enum ice_adminq_opc { /* Standalone Commands/Events */ ice_aqc_opc_event_lan_overflow = 0x1001, - - /* debug commands */ - ice_aqc_opc_fw_logging = 0xFF09, - ice_aqc_opc_fw_logging_info = 0xFF10, }; #endif /* _ICE_ADMINQ_CMD_H_ */ diff --git a/drivers/net/ethernet/intel/ice/ice_common.c b/drivers/net/ethernet/intel/ice/ice_common.c index 8d97434e1413..6e4a0837f6d5 100644 --- a/drivers/net/ethernet/intel/ice/ice_common.c +++ b/drivers/net/ethernet/intel/ice/ice_common.c @@ -933,216 +933,6 @@ static void ice_cleanup_fltr_mgmt_struct(struct ice_hw *hw) devm_kfree(ice_hw_to_dev(hw), sw); } -/** - * ice_get_fw_log_cfg - get FW logging configuration - * @hw: pointer to the HW struct - */ -static int ice_get_fw_log_cfg(struct ice_hw *hw) -{ - struct ice_aq_desc desc; - __le16 *config; - int status; - u16 size; - - size = sizeof(*config) * ICE_AQC_FW_LOG_ID_MAX; - config = kzalloc(size, GFP_KERNEL); - if (!config) - return -ENOMEM; - - ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_fw_logging_info); - - status = ice_aq_send_cmd(hw, &desc, config, size, NULL); - if (!status) { - u16 i; - - /* Save FW logging information into the HW structure */ - for (i = 0; i < ICE_AQC_FW_LOG_ID_MAX; i++) { - u16 v, m, flgs; - - v = le16_to_cpu(config[i]); - m = (v & ICE_AQC_FW_LOG_ID_M) >> ICE_AQC_FW_LOG_ID_S; - flgs = (v & ICE_AQC_FW_LOG_EN_M) >> ICE_AQC_FW_LOG_EN_S; - - if (m < ICE_AQC_FW_LOG_ID_MAX) - hw->fw_log.evnts[m].cur = flgs; - } - } - - kfree(config); - - return status; -} - -/** - * ice_cfg_fw_log - configure FW logging - * @hw: pointer to the HW struct - * @enable: enable certain FW logging events if true, disable all if false - * - * This function enables/disables the FW logging via Rx CQ events and a UART - * port based on predetermined configurations. FW logging via the Rx CQ can be - * enabled/disabled for individual PF's. However, FW logging via the UART can - * only be enabled/disabled for all PFs on the same device. - * - * To enable overall FW logging, the "cq_en" and "uart_en" enable bits in - * hw->fw_log need to be set accordingly, e.g. based on user-provided input, - * before initializing the device. - * - * When re/configuring FW logging, callers need to update the "cfg" elements of - * the hw->fw_log.evnts array with the desired logging event configurations for - * modules of interest. When disabling FW logging completely, the callers can - * just pass false in the "enable" parameter. On completion, the function will - * update the "cur" element of the hw->fw_log.evnts array with the resulting - * logging event configurations of the modules that are being re/configured. FW - * logging modules that are not part of a reconfiguration operation retain their - * previous states. - * - * Before resetting the device, it is recommended that the driver disables FW - * logging before shutting down the control queue. When disabling FW logging - * ("enable" = false), the latest configurations of FW logging events stored in - * hw->fw_log.evnts[] are not overridden to allow them to be reconfigured after - * a device reset. - * - * When enabling FW logging to emit log messages via the Rx CQ during the - * device's initialization phase, a mechanism alternative to interrupt handlers - * needs to be used to extract FW log messages from the Rx CQ periodically and - * to prevent the Rx CQ from being full and stalling other types of control - * messages from FW to SW. Interrupts are typically disabled during the device's - * initialization phase. - */ -static int ice_cfg_fw_log(struct ice_hw *hw, bool enable) -{ - struct ice_aqc_fw_logging *cmd; - u16 i, chgs = 0, len = 0; - struct ice_aq_desc desc; - __le16 *data = NULL; - u8 actv_evnts = 0; - void *buf = NULL; - int status = 0; - - if (!hw->fw_log.cq_en && !hw->fw_log.uart_en) - return 0; - - /* Disable FW logging only when the control queue is still responsive */ - if (!enable && - (!hw->fw_log.actv_evnts || !ice_check_sq_alive(hw, &hw->adminq))) - return 0; - - /* Get current FW log settings */ - status = ice_get_fw_log_cfg(hw); - if (status) - return status; - - ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_fw_logging); - cmd = &desc.params.fw_logging; - - /* Indicate which controls are valid */ - if (hw->fw_log.cq_en) - cmd->log_ctrl_valid |= ICE_AQC_FW_LOG_AQ_VALID; - - if (hw->fw_log.uart_en) - cmd->log_ctrl_valid |= ICE_AQC_FW_LOG_UART_VALID; - - if (enable) { - /* Fill in an array of entries with FW logging modules and - * logging events being reconfigured. - */ - for (i = 0; i < ICE_AQC_FW_LOG_ID_MAX; i++) { - u16 val; - - /* Keep track of enabled event types */ - actv_evnts |= hw->fw_log.evnts[i].cfg; - - if (hw->fw_log.evnts[i].cfg == hw->fw_log.evnts[i].cur) - continue; - - if (!data) { - data = devm_kcalloc(ice_hw_to_dev(hw), - ICE_AQC_FW_LOG_ID_MAX, - sizeof(*data), - GFP_KERNEL); - if (!data) - return -ENOMEM; - } - - val = i << ICE_AQC_FW_LOG_ID_S; - val |= hw->fw_log.evnts[i].cfg << ICE_AQC_FW_LOG_EN_S; - data[chgs++] = cpu_to_le16(val); - } - - /* Only enable FW logging if at least one module is specified. - * If FW logging is currently enabled but all modules are not - * enabled to emit log messages, disable FW logging altogether. - */ - if (actv_evnts) { - /* Leave if there is effectively no change */ - if (!chgs) - goto out; - - if (hw->fw_log.cq_en) - cmd->log_ctrl |= ICE_AQC_FW_LOG_AQ_EN; - - if (hw->fw_log.uart_en) - cmd->log_ctrl |= ICE_AQC_FW_LOG_UART_EN; - - buf = data; - len = sizeof(*data) * chgs; - desc.flags |= cpu_to_le16(ICE_AQ_FLAG_RD); - } - } - - status = ice_aq_send_cmd(hw, &desc, buf, len, NULL); - if (!status) { - /* Update the current configuration to reflect events enabled. - * hw->fw_log.cq_en and hw->fw_log.uart_en indicate if the FW - * logging mode is enabled for the device. They do not reflect - * actual modules being enabled to emit log messages. So, their - * values remain unchanged even when all modules are disabled. - */ - u16 cnt = enable ? chgs : (u16)ICE_AQC_FW_LOG_ID_MAX; - - hw->fw_log.actv_evnts = actv_evnts; - for (i = 0; i < cnt; i++) { - u16 v, m; - - if (!enable) { - /* When disabling all FW logging events as part - * of device's de-initialization, the original - * configurations are retained, and can be used - * to reconfigure FW logging later if the device - * is re-initialized. - */ - hw->fw_log.evnts[i].cur = 0; - continue; - } - - v = le16_to_cpu(data[i]); - m = (v & ICE_AQC_FW_LOG_ID_M) >> ICE_AQC_FW_LOG_ID_S; - hw->fw_log.evnts[m].cur = hw->fw_log.evnts[m].cfg; - } - } - -out: - devm_kfree(ice_hw_to_dev(hw), data); - - return status; -} - -/** - * ice_output_fw_log - * @hw: pointer to the HW struct - * @desc: pointer to the AQ message descriptor - * @buf: pointer to the buffer accompanying the AQ message - * - * Formats a FW Log message and outputs it via the standard driver logs. - */ -void ice_output_fw_log(struct ice_hw *hw, struct ice_aq_desc *desc, void *buf) -{ - ice_debug(hw, ICE_DBG_FW_LOG, "[ FW Log Msg Start ]\n"); - ice_debug_array(hw, ICE_DBG_FW_LOG, 16, 1, (u8 *)buf, - le16_to_cpu(desc->datalen)); - ice_debug(hw, ICE_DBG_FW_LOG, "[ FW Log Msg End ]\n"); -} - /** * ice_get_itr_intrl_gran * @hw: pointer to the HW struct @@ -1200,11 +990,6 @@ int ice_init_hw(struct ice_hw *hw) if (status) goto err_unroll_cqinit; - /* Enable FW logging. Not fatal if this fails. */ - status = ice_cfg_fw_log(hw, true); - if (status) - ice_debug(hw, ICE_DBG_INIT, "Failed to enable FW logging.\n"); - status = ice_clear_pf_cfg(hw); if (status) goto err_unroll_cqinit; @@ -1354,8 +1139,6 @@ void ice_deinit_hw(struct ice_hw *hw) ice_free_hw_tbls(hw); mutex_destroy(&hw->tnl_lock); - /* Attempt to disable FW logging before shutting down control queues */ - ice_cfg_fw_log(hw, false); ice_destroy_all_ctrlq(hw); /* Clear VSI contexts if not already cleared */ diff --git a/drivers/net/ethernet/intel/ice/ice_common.h b/drivers/net/ethernet/intel/ice/ice_common.h index 77b4c68cf696..3e933f75e948 100644 --- a/drivers/net/ethernet/intel/ice/ice_common.h +++ b/drivers/net/ethernet/intel/ice/ice_common.h @@ -200,7 +200,6 @@ ice_aq_cfg_lan_txq(struct ice_hw *hw, struct ice_aqc_cfg_txqs_buf *buf, struct ice_sq_cd *cd); int ice_replay_vsi(struct ice_hw *hw, u16 vsi_handle); void ice_replay_post(struct ice_hw *hw); -void ice_output_fw_log(struct ice_hw *hw, struct ice_aq_desc *desc, void *buf); struct ice_q_ctx * ice_get_lan_q_ctx(struct ice_hw *hw, u16 vsi_handle, u8 tc, u16 q_handle); int ice_sbq_rw_reg(struct ice_hw *hw, struct ice_sbq_msg_input *in); diff --git a/drivers/net/ethernet/intel/ice/ice_main.c b/drivers/net/ethernet/intel/ice/ice_main.c index d1a14bf7b65c..93b3c7521c5d 100644 --- a/drivers/net/ethernet/intel/ice/ice_main.c +++ b/drivers/net/ethernet/intel/ice/ice_main.c @@ -1533,9 +1533,6 @@ static int __ice_clean_ctrlq(struct ice_pf *pf, enum ice_ctl_q q_type) ice_vc_process_vf_msg(pf, &event, &data); break; - case ice_aqc_opc_fw_logging: - ice_output_fw_log(hw, &event.desc, event.msg_buf); - break; case ice_aqc_opc_lldp_set_mib_change: ice_dcb_process_lldp_set_mib_change(pf, &event); break; diff --git a/drivers/net/ethernet/intel/ice/ice_type.h b/drivers/net/ethernet/intel/ice/ice_type.h index 8489248db0fc..2d3c7dbf0417 100644 --- a/drivers/net/ethernet/intel/ice/ice_type.h +++ b/drivers/net/ethernet/intel/ice/ice_type.h @@ -738,24 +738,6 @@ struct ice_switch_info { DECLARE_BITMAP(prof_res_bm[ICE_MAX_NUM_PROFILES], ICE_MAX_FV_WORDS); }; -/* FW logging configuration */ -struct ice_fw_log_evnt { - u8 cfg : 4; /* New event enables to configure */ - u8 cur : 4; /* Current/active event enables */ -}; - -struct ice_fw_log_cfg { - u8 cq_en : 1; /* FW logging is enabled via the control queue */ - u8 uart_en : 1; /* FW logging is enabled via UART for all PFs */ - u8 actv_evnts; /* Cumulation of currently enabled log events */ - -#define ICE_FW_LOG_EVNT_INFO (ICE_AQC_FW_LOG_INFO_EN >> ICE_AQC_FW_LOG_EN_S) -#define ICE_FW_LOG_EVNT_INIT (ICE_AQC_FW_LOG_INIT_EN >> ICE_AQC_FW_LOG_EN_S) -#define ICE_FW_LOG_EVNT_FLOW (ICE_AQC_FW_LOG_FLOW_EN >> ICE_AQC_FW_LOG_EN_S) -#define ICE_FW_LOG_EVNT_ERR (ICE_AQC_FW_LOG_ERR_EN >> ICE_AQC_FW_LOG_EN_S) - struct ice_fw_log_evnt evnts[ICE_AQC_FW_LOG_ID_MAX]; -}; - /* Enum defining the different states of the mailbox snapshot in the * PF-VF mailbox overflow detection algorithm. The snapshot can be in * states: @@ -897,8 +879,6 @@ struct ice_hw { u8 fw_patch; /* firmware patch version */ u32 fw_build; /* firmware build number */ - struct ice_fw_log_cfg fw_log; - /* Device max aggregate bandwidths corresponding to the GL_PWR_MODE_CTL * register. Used for determining the ITR/INTRL granularity during * initialization.