bootconfig/tracing/ktest: Add ktest examples of testing bootconfig

bootconfig is a new feature that appends scripts onto the initrd, and the
kernel executes the scripts as an extended kernel command line.

Need to add tests to test that the happened. To test the bootconfig
properly, the initrd needs to be updated and the kernel rebooted. ktest is
the perfect solution to perform these tests.

Add a example bootconfig.conf in the tools/testing/ktest/examples/include
and example bootconfig scripts in tools/testing/ktest/examples/bootconfig
and also include verifier scripts that ktest will install on the target
and run to make sure that the bootconfig options in the scripts took place
after the target rebooted with the new initrd update.

Link: https://lkml.kernel.org/r/20210618112647.6a81dec5@oasis.local.home

Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

tools/testing/ktest/examples/bootconfigs/boottrace.bconf

@@ -0,0 +1,49 @@
+ftrace.event {
+	task.task_newtask {
+		filter = "pid < 128"
+		enable
+	}
+	kprobes.vfs_read {
+		probes = "vfs_read $arg1 $arg2"
+		filter = "common_pid < 200"
+		enable
+	}
+	synthetic.initcall_latency {
+		fields = "unsigned long func", "u64 lat"
+		actions = "hist:keys=func.sym,lat:vals=lat:sort=lat"
+	}
+	initcall.initcall_start {
+		actions = "hist:keys=func:ts0=common_timestamp.usecs"
+	}
+	initcall.initcall_finish {
+		actions = "hist:keys=func:lat=common_timestamp.usecs-$ts0:onmatch(initcall.initcall_start).initcall_latency(func,$lat)"
+	}
+}
+
+ftrace.instance {
+	foo {
+		tracer = "function"
+		ftrace.filters = "user_*"
+		cpumask = 1
+		options = nosym-addr
+		buffer_size = 512KB
+		trace_clock = mono
+		event.signal.signal_deliver.actions=snapshot
+	}
+	bar {
+		tracer = "function"
+		ftrace.filters = "kernel_*"
+		cpumask = 2
+		trace_clock = x86-tsc
+	}
+}
+
+ftrace.alloc_snapshot
+
+kernel {
+	trace_options = sym-addr
+	trace_event = "initcall:*"
+	trace_buf_size = 1M
+	ftrace = function
+	ftrace_filter = "vfs*"
+}

tools/testing/ktest/examples/bootconfigs/config-bootconfig

@@ -0,0 +1 @@
+CONFIG_CMDLINE="bootconfig"

tools/testing/ktest/examples/bootconfigs/functiongraph.bconf

@@ -0,0 +1,15 @@
+ftrace {
+	tracing_on = 0  # off by default
+	tracer = function_graph
+	event.kprobes {
+		start_event {
+			probes = "pci_proc_init"
+			actions = "traceon"
+		}
+		end_event {
+			probes = "pci_proc_init%return"
+			actions = "traceoff"
+		}
+	}
+}
+

tools/testing/ktest/examples/bootconfigs/tracing.bconf

@@ -0,0 +1,33 @@
+ftrace {
+	tracer = function_graph;
+	options = event-fork, sym-addr, stacktrace;
+	buffer_size = 1M;
+	alloc_snapshot;
+	trace_clock = global;
+	events = "task:task_newtask", "initcall:*";
+	event.sched.sched_process_exec {
+		filter = "pid < 128";
+	}
+	instance.bar {
+		event.kprobes {
+			myevent {
+				probes = "vfs_read $arg2 $arg3";
+			}
+			myevent2 {
+				probes = "vfs_write $arg2 +0($arg2):ustring $arg3";
+			}
+			myevent3 {
+				probes = "initrd_load";
+			}
+			enable
+		}
+	}
+	instance.foo {
+		tracer = function;
+		tracing_on = false;
+	};
+}
+kernel {
+	ftrace_dump_on_oops = "orig_cpu"
+	traceoff_on_warning
+}

tools/testing/ktest/examples/bootconfigs/verify-boottrace.sh

@@ -0,0 +1,84 @@
+#!/bin/sh
+
+cd /sys/kernel/tracing
+
+compare_file() {
+	file="$1"
+	val="$2"
+	content=`cat $file`
+	if [ "$content" != "$val" ]; then
+		echo "FAILED: $file has '$content', expected '$val'"
+		exit 1
+	fi
+}
+
+compare_file_partial() {
+	file="$1"
+	val="$2"
+	content=`cat $file | sed -ne "/^$val/p"`
+	if [ -z "$content" ]; then
+		echo "FAILED: $file does not contain '$val'"
+		cat $file
+		exit 1
+	fi
+}
+
+file_contains() {
+	file=$1
+	val="$2"
+
+	if ! grep -q "$val" $file ; then
+		echo "FAILED: $file does not contain $val"
+		cat $file
+		exit 1
+	fi
+}
+
+compare_mask() {
+	file=$1
+	val="$2"
+
+	content=`cat $file | sed -ne "/^[0 ]*$val/p"`
+	if [ -z "$content" ]; then
+		echo "FAILED: $file does not have mask '$val'"
+		cat $file
+		exit 1
+	fi
+}
+
+compare_file "events/task/task_newtask/filter" "pid < 128"
+compare_file "events/task/task_newtask/enable" "1"
+
+compare_file "events/kprobes/vfs_read/filter" "common_pid < 200"
+compare_file "events/kprobes/vfs_read/enable" "1"
+
+compare_file_partial "events/synthetic/initcall_latency/trigger" "hist:keys=func.sym,lat:vals=hitcount,lat:sort=lat"
+compare_file_partial "events/synthetic/initcall_latency/enable" "0"
+
+compare_file_partial "events/initcall/initcall_start/trigger" "hist:keys=func:vals=hitcount:ts0=common_timestamp.usecs"
+compare_file_partial "events/initcall/initcall_start/enable" "1"
+
+compare_file_partial "events/initcall/initcall_finish/trigger" 'hist:keys=func:vals=hitcount:lat=common_timestamp.usecs-\$ts0:sort=hitcount:size=2048:clock=global:onmatch(initcall.initcall_start).initcall_latency(func,\$lat)'
+compare_file_partial "events/initcall/initcall_finish/enable" "1"
+
+compare_file "instances/foo/current_tracer" "function"
+file_contains "instances/foo/set_ftrace_filter" "^user"
+compare_file "instances/foo/buffer_size_kb" "512"
+compare_mask "instances/foo/tracing_cpumask" "1"
+compare_file "instances/foo/options/sym-addr" "0"
+file_contains "instances/foo/trace_clock" '\[mono\]'
+compare_file_partial "instances/foo/events/signal/signal_deliver/trigger" "snapshot"
+
+compare_file "instances/bar/current_tracer" "function"
+file_contains "instances/bar/set_ftrace_filter" "^kernel"
+compare_mask "instances/bar/tracing_cpumask" "2"
+file_contains "instances/bar/trace_clock" '\[x86-tsc\]'
+
+file_contains "snapshot" "Snapshot is allocated"
+compare_file "options/sym-addr" "1"
+compare_file "events/initcall/enable" "1"
+compare_file "buffer_size_kb" "1027"
+compare_file "current_tracer" "function"
+file_contains "set_ftrace_filter" '^vfs'
+
+exit 0

tools/testing/ktest/examples/bootconfigs/verify-functiongraph.sh

@@ -0,0 +1,61 @@
+#!/bin/sh
+
+cd /sys/kernel/tracing
+
+compare_file() {
+	file="$1"
+	val="$2"
+	content=`cat $file`
+	if [ "$content" != "$val" ]; then
+		echo "FAILED: $file has '$content', expected '$val'"
+		exit 1
+	fi
+}
+
+compare_file_partial() {
+	file="$1"
+	val="$2"
+	content=`cat $file | sed -ne "/^$val/p"`
+	if [ -z "$content" ]; then
+		echo "FAILED: $file does not contain '$val'"
+		cat $file
+		exit 1
+	fi
+}
+
+file_contains() {
+	file=$1
+	val="$2"
+
+	if ! grep -q "$val" $file ; then
+		echo "FAILED: $file does not contain $val"
+		cat $file
+		exit 1
+	fi
+}
+
+compare_mask() {
+	file=$1
+	val="$2"
+
+	content=`cat $file | sed -ne "/^[0 ]*$val/p"`
+	if [ -z "$content" ]; then
+		echo "FAILED: $file does not have mask '$val'"
+		cat $file
+		exit 1
+	fi
+}
+
+
+compare_file "tracing_on" "0"
+compare_file "current_tracer" "function_graph"
+
+compare_file_partial "events/kprobes/start_event/enable" "1"
+compare_file_partial "events/kprobes/start_event/trigger" "traceon"
+file_contains "kprobe_events" 'start_event.*pci_proc_init'
+
+compare_file_partial "events/kprobes/end_event/enable" "1"
+compare_file_partial "events/kprobes/end_event/trigger" "traceoff"
+file_contains "kprobe_events" '^r.*end_event.*pci_proc_init'
+
+exit 0

tools/testing/ktest/examples/bootconfigs/verify-tracing.sh

@@ -0,0 +1,72 @@
+#!/bin/sh
+
+cd /sys/kernel/tracing
+
+compare_file() {
+	file="$1"
+	val="$2"
+	content=`cat $file`
+	if [ "$content" != "$val" ]; then
+		echo "FAILED: $file has '$content', expected '$val'"
+		exit 1
+	fi
+}
+
+compare_file_partial() {
+	file="$1"
+	val="$2"
+	content=`cat $file | sed -ne "/^$val/p"`
+	if [ -z "$content" ]; then
+		echo "FAILED: $file does not contain '$val'"
+		cat $file
+		exit 1
+	fi
+}
+
+file_contains() {
+	file=$1
+	val="$2"
+
+	if ! grep -q "$val" $file ; then
+		echo "FAILED: $file does not contain $val"
+		cat $file
+		exit 1
+	fi
+}
+
+compare_mask() {
+	file=$1
+	val="$2"
+
+	content=`cat $file | sed -ne "/^[0 ]*$val/p"`
+	if [ -z "$content" ]; then
+		echo "FAILED: $file does not have mask '$val'"
+		cat $file
+		exit 1
+	fi
+}
+
+compare_file "current_tracer" "function_graph"
+compare_file "options/event-fork" "1"
+compare_file "options/sym-addr" "1"
+compare_file "options/stacktrace" "1"
+compare_file "buffer_size_kb" "1024"
+file_contains "snapshot" "Snapshot is allocated"
+file_contains "trace_clock" '\[global\]'
+
+compare_file "events/initcall/enable" "1"
+compare_file "events/task/task_newtask/enable" "1"
+compare_file "events/sched/sched_process_exec/filter" "pid < 128"
+compare_file "events/kprobes/enable" "1"
+
+compare_file "instances/bar/events/kprobes/myevent/enable" "1"
+compare_file "instances/bar/events/kprobes/myevent2/enable" "1"
+compare_file "instances/bar/events/kprobes/myevent3/enable" "1"
+
+compare_file "instances/foo/current_tracer" "function"
+compare_file "instances/foo/tracing_on" "0"
+
+compare_file "/proc/sys/kernel/ftrace_dump_on_oops" "2"
+compare_file "/proc/sys/kernel/traceoff_on_warning" "1"
+
+exit 0

tools/testing/ktest/examples/include/bootconfig.conf

@@ -0,0 +1,69 @@
+# bootconfig.conf
+#
+# Tests to test some bootconfig scripts
+
+# List where on the target machine the initrd is used
+INITRD := /boot/initramfs-test.img
+
+# Install bootconfig on the target machine and define the path here.
+BOOTCONFIG := /usr/bin/bootconfig
+
+# Currenty we just build the .config in the BUILD_DIR
+BUILD_TYPE := oldconfig
+
+# Helper macro to run bootconfig on the target
+# SSH is defined in include/defaults.conf
+ADD_BOOTCONFIG := ${SSH} "${BOOTCONFIG} -d ${INITRD} && ${BOOTCONFIG} -a /tmp/${BOOTCONFIG_FILE} ${INITRD}"
+
+# This copies a bootconfig script to the target and then will
+# add it to the initrd. SSH_USER is defined in include/defaults.conf
+# and MACHINE is defined in the example configs.
+BOOTCONFIG_TEST_PREP = scp ${BOOTCONFIG_PATH}${BOOTCONFIG_FILE} ${SSH_USER}@${MACHINE}:/tmp && ${ADD_BOOTCONFIG}
+
+# When a test is complete, remove the bootconfig from the initrd.
+CLEAR_BOOTCONFIG := ${SSH} "${BOOTCONFIG} -d ${INITRD}"
+
+# Run a verifier on the target after it had booted, to make sure that the
+# bootconfig script did what it was expected to do
+DO_TEST = scp ${BOOTCONFIG_PATH}${BOOTCONFIG_VERIFY} ${SSH_USER}@${MACHINE}:/tmp && ${SSH} /tmp/${BOOTCONFIG_VERIFY}
+
+# Comment this out to not run the boot configs
+RUN_BOOTCONFIG := 1
+
+TEST_START IF DEFINED RUN_BOOTCONFIG
+TEST_TYPE = test
+TEST_NAME = bootconfig boottrace
+# Just testing the bootconfig on initrd, no need to build the kernel
+BUILD_TYPE = nobuild
+BOOTCONFIG_FILE = boottrace.bconf
+BOOTCONFIG_VERIFY = verify-boottrace.sh
+ADD_CONFIG = ${ADD_CONFIG} ${BOOTCONFIG_PATH}/config-bootconfig
+PRE_TEST = ${BOOTCONFIG_TEST_PREP}
+PRE_TEST_DIE = 1
+TEST = ${DO_TEST}
+POST_TEST = ${CLEAR_BOOTCONFIG}
+
+TEST_START IF DEFINED RUN_BOOTCONFIG
+TEST_TYPE = test
+TEST_NAME = bootconfig function graph
+BUILD_TYPE = nobuild
+BOOTCONFIG_FILE = functiongraph.bconf
+BOOTCONFIG_VERIFY = verify-functiongraph.sh
+ADD_CONFIG = ${ADD_CONFIG} ${BOOTCONFIG_PATH}/config-bootconfig
+PRE_TEST = ${BOOTCONFIG_TEST_PREP}
+PRE_TEST_DIE = 1
+TEST = ${DO_TEST}
+POST_TEST = ${CLEAR_BOOTCONFIG}
+
+TEST_START IF DEFINED RUN_BOOTCONFIG
+TEST_TYPE = test
+TEST_NAME = bootconfig tracing
+BUILD_TYPE = nobuild
+BOOTCONFIG_FILE = tracing.bconf
+BOOTCONFIG_VERIFY = verify-tracing.sh
+ADD_CONFIG = ${ADD_CONFIG} ${BOOTCONFIG_PATH}/config-bootconfig
+PRE_TEST = ${BOOTCONFIG_TEST_PREP}
+PRE_TEST_DIE = 1
+TEST = ${DO_TEST}
+POST_TEST = ${CLEAR_BOOTCONFIG}
+

tools/testing/ktest/examples/kvm.conf

@@ -90,3 +90,4 @@ INCLUDE include/patchcheck.conf
 INCLUDE include/tests.conf
 INCLUDE include/bisect.conf
 INCLUDE include/min-config.conf
+INCLUDE include/bootconfig.conf