diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 39aa21d01e05..19fc5f8883e0 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -358,6 +358,19 @@ config ARM_GLOBAL_TIMER help This option enables support for the ARM global timer unit. +config ARM_GT_INITIAL_PRESCALER_VAL + int "ARM global timer initial prescaler value" + default 1 + depends on ARM_GLOBAL_TIMER + help + When the ARM global timer initializes, its current rate is declared + to the kernel and maintained forever. Should it's parent clock + change, the driver tries to fix the timer's internal prescaler. + On some machs (i.e. Zynq) the initial prescaler value thus poses + bounds about how much the parent clock is allowed to decrease or + increase wrt the initial clock value. + This affects CPU_FREQ max delta from the initial frequency. + config ARM_TIMER_SP804 bool "Support for Dual Timer SP804 module" if COMPILE_TEST depends on GENERIC_SCHED_CLOCK && CLKDEV_LOOKUP diff --git a/drivers/clocksource/arm_global_timer.c b/drivers/clocksource/arm_global_timer.c index 88b2d38a7a61..60a8047fd32e 100644 --- a/drivers/clocksource/arm_global_timer.c +++ b/drivers/clocksource/arm_global_timer.c @@ -31,6 +31,10 @@ #define GT_CONTROL_COMP_ENABLE BIT(1) /* banked */ #define GT_CONTROL_IRQ_ENABLE BIT(2) /* banked */ #define GT_CONTROL_AUTO_INC BIT(3) /* banked */ +#define GT_CONTROL_PRESCALER_SHIFT 8 +#define GT_CONTROL_PRESCALER_MAX 0xF +#define GT_CONTROL_PRESCALER_MASK (GT_CONTROL_PRESCALER_MAX << \ + GT_CONTROL_PRESCALER_SHIFT) #define GT_INT_STATUS 0x0c #define GT_INT_STATUS_EVENT_FLAG BIT(0) @@ -39,6 +43,7 @@ #define GT_COMP1 0x14 #define GT_AUTO_INC 0x18 +#define MAX_F_ERR 50 /* * We are expecting to be clocked by the ARM peripheral clock. * @@ -46,7 +51,8 @@ * the units for all operations. */ static void __iomem *gt_base; -static unsigned long gt_clk_rate; +struct notifier_block gt_clk_rate_change_nb; +static u32 gt_psv_new, gt_psv_bck, gt_target_rate; static int gt_ppi; static struct clock_event_device __percpu *gt_evt; @@ -96,7 +102,10 @@ static void gt_compare_set(unsigned long delta, int periodic) unsigned long ctrl; counter += delta; - ctrl = GT_CONTROL_TIMER_ENABLE; + ctrl = readl(gt_base + GT_CONTROL); + ctrl &= ~(GT_CONTROL_COMP_ENABLE | GT_CONTROL_IRQ_ENABLE | + GT_CONTROL_AUTO_INC | GT_CONTROL_AUTO_INC); + ctrl |= GT_CONTROL_TIMER_ENABLE; writel_relaxed(ctrl, gt_base + GT_CONTROL); writel_relaxed(lower_32_bits(counter), gt_base + GT_COMP0); writel_relaxed(upper_32_bits(counter), gt_base + GT_COMP1); @@ -123,7 +132,7 @@ static int gt_clockevent_shutdown(struct clock_event_device *evt) static int gt_clockevent_set_periodic(struct clock_event_device *evt) { - gt_compare_set(DIV_ROUND_CLOSEST(gt_clk_rate, HZ), 1); + gt_compare_set(DIV_ROUND_CLOSEST(gt_target_rate, HZ), 1); return 0; } @@ -177,7 +186,7 @@ static int gt_starting_cpu(unsigned int cpu) clk->cpumask = cpumask_of(cpu); clk->rating = 300; clk->irq = gt_ppi; - clockevents_config_and_register(clk, gt_clk_rate, + clockevents_config_and_register(clk, gt_target_rate, 1, 0xffffffff); enable_percpu_irq(clk->irq, IRQ_TYPE_NONE); return 0; @@ -232,9 +241,28 @@ static struct delay_timer gt_delay_timer = { .read_current_timer = gt_read_long, }; +static void gt_write_presc(u32 psv) +{ + u32 reg; + + reg = readl(gt_base + GT_CONTROL); + reg &= ~GT_CONTROL_PRESCALER_MASK; + reg |= psv << GT_CONTROL_PRESCALER_SHIFT; + writel(reg, gt_base + GT_CONTROL); +} + +static u32 gt_read_presc(void) +{ + u32 reg; + + reg = readl(gt_base + GT_CONTROL); + reg &= GT_CONTROL_PRESCALER_MASK; + return reg >> GT_CONTROL_PRESCALER_SHIFT; +} + static void __init gt_delay_timer_init(void) { - gt_delay_timer.freq = gt_clk_rate; + gt_delay_timer.freq = gt_target_rate; register_current_timer_delay(>_delay_timer); } @@ -243,18 +271,81 @@ static int __init gt_clocksource_init(void) writel(0, gt_base + GT_CONTROL); writel(0, gt_base + GT_COUNTER0); writel(0, gt_base + GT_COUNTER1); - /* enables timer on all the cores */ - writel(GT_CONTROL_TIMER_ENABLE, gt_base + GT_CONTROL); + /* set prescaler and enable timer on all the cores */ + writel(((CONFIG_ARM_GT_INITIAL_PRESCALER_VAL - 1) << + GT_CONTROL_PRESCALER_SHIFT) + | GT_CONTROL_TIMER_ENABLE, gt_base + GT_CONTROL); #ifdef CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK - sched_clock_register(gt_sched_clock_read, 64, gt_clk_rate); + sched_clock_register(gt_sched_clock_read, 64, gt_target_rate); #endif - return clocksource_register_hz(>_clocksource, gt_clk_rate); + return clocksource_register_hz(>_clocksource, gt_target_rate); +} + +static int gt_clk_rate_change_cb(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct clk_notifier_data *ndata = data; + + switch (event) { + case PRE_RATE_CHANGE: + { + int psv; + + psv = DIV_ROUND_CLOSEST(ndata->new_rate, + gt_target_rate); + + if (abs(gt_target_rate - (ndata->new_rate / psv)) > MAX_F_ERR) + return NOTIFY_BAD; + + psv--; + + /* prescaler within legal range? */ + if (psv < 0 || psv > GT_CONTROL_PRESCALER_MAX) + return NOTIFY_BAD; + + /* + * store timer clock ctrl register so we can restore it in case + * of an abort. + */ + gt_psv_bck = gt_read_presc(); + gt_psv_new = psv; + /* scale down: adjust divider in post-change notification */ + if (ndata->new_rate < ndata->old_rate) + return NOTIFY_DONE; + + /* scale up: adjust divider now - before frequency change */ + gt_write_presc(psv); + break; + } + case POST_RATE_CHANGE: + /* scale up: pre-change notification did the adjustment */ + if (ndata->new_rate > ndata->old_rate) + return NOTIFY_OK; + + /* scale down: adjust divider now - after frequency change */ + gt_write_presc(gt_psv_new); + break; + + case ABORT_RATE_CHANGE: + /* we have to undo the adjustment in case we scale up */ + if (ndata->new_rate < ndata->old_rate) + return NOTIFY_OK; + + /* restore original register value */ + gt_write_presc(gt_psv_bck); + break; + default: + return NOTIFY_DONE; + } + + return NOTIFY_DONE; } static int __init global_timer_of_register(struct device_node *np) { struct clk *gt_clk; + static unsigned long gt_clk_rate; int err = 0; /* @@ -292,11 +383,20 @@ static int __init global_timer_of_register(struct device_node *np) } gt_clk_rate = clk_get_rate(gt_clk); + gt_target_rate = gt_clk_rate / CONFIG_ARM_GT_INITIAL_PRESCALER_VAL; + gt_clk_rate_change_nb.notifier_call = + gt_clk_rate_change_cb; + err = clk_notifier_register(gt_clk, >_clk_rate_change_nb); + if (err) { + pr_warn("Unable to register clock notifier\n"); + goto out_clk; + } + gt_evt = alloc_percpu(struct clock_event_device); if (!gt_evt) { pr_warn("global-timer: can't allocate memory\n"); err = -ENOMEM; - goto out_clk; + goto out_clk_nb; } err = request_percpu_irq(gt_ppi, gt_clockevent_interrupt, @@ -326,6 +426,8 @@ out_irq: free_percpu_irq(gt_ppi, gt_evt); out_free: free_percpu(gt_evt); +out_clk_nb: + clk_notifier_unregister(gt_clk, >_clk_rate_change_nb); out_clk: clk_disable_unprepare(gt_clk); out_unmap: