ARM: SoC fixes for 5.19

A number of fixes have accumulated, but they are largely for harmless issues: - Several OF node leak fixes - A fix to the Exynos7885 UART clock description - DTS fixes to prevent boot failures on TI AM64 and J721s2 - Bus probe error handling fixes for Baikal-T1 - A fixup to the way STM32 SoCs use separate dts files for different firmware stacks - Multiple code fixes for Arm SCMI firmware, all dealing with robustness of the implementation - Multiple NXP i.MX devicetree fixes, addressing incorrect data in DT nodes - Three updates to the MAINTAINERS file, including Florian Fainelli taking over BCM283x/BCM2711 (Raspberry Pi) from Nicolas Saenz Julienne -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmK4yEMACgkQmmx57+YA GNlSIQ/+NY4ViA4IoBrpi1OWmW/1OW10MpI7EqCwh30np6swp5Oub01LncwC++b8 Fc1zHX99teDj0xU3/zuwtwFZtQ9ZyEQ2vABvZRjh1ONthmpS13se2XZHDynt1/bT 0LWUM/PQ8/9sHf0JWxUNH466qIP1I5MVxy0iTaTlUKOdk+cwq3fZ4oYEgWkpQIq5 jtAMmg9Nsn21iTD2RyTC7/pNuJakPqo7YZ9lvxbRyLwg8a9ewJsszJg6ZUuoeeH+ tJNrPuVesl2pohYE+R2EYdzMbf0blTgmydZtYGbCGeJTlZ015Y/IPxdAgjSKeHe8 /n6hfolyiIyhc5El/88pYeaXPZi/3jzbJ9QEhwCdcgP8bcGCRPs/I8CuWccXWmUK tI7KTFfyNOYs3vL0Gd2/TGJm8NEe8hh2uUePQ9ssXoM0hukJEd3rAHEVR0xz7HwO wBzlutOORv3MLdAWOVG6jniE8OFAop2pqNp/IlZ/MiXwu5WvJX2w7DwbYj0a4R00 A6DJqz8OJovMuN1XhT59NiaVwojM2zh1YoYEtfqppiw6AjTDHDxujdEKC+DOCtBo iQgHjH5+Xn3bWm2lXvBgcsjP+ivxjjhsMjhZ1fmN/RFcm7OQyG82S6Bs00keVzOD kcdYkW9WfLkLzFh3+H5uXQgSz4K7ox1TvTfCAupBCn8C5WFrFNY= =Js9H -----END PGP SIGNATURE----- Merge tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "A number of fixes have accumulated, but they are largely for harmless issues: - Several OF node leak fixes - A fix to the Exynos7885 UART clock description - DTS fixes to prevent boot failures on TI AM64 and J721s2 - Bus probe error handling fixes for Baikal-T1 - A fixup to the way STM32 SoCs use separate dts files for different firmware stacks - Multiple code fixes for Arm SCMI firmware, all dealing with robustness of the implementation - Multiple NXP i.MX devicetree fixes, addressing incorrect data in DT nodes - Three updates to the MAINTAINERS file, including Florian Fainelli taking over BCM283x/BCM2711 (Raspberry Pi) from Nicolas Saenz Julienne" * tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits) ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom arm: mach-spear: Add missing of_node_put() in time.c ARM: cns3xxx: Fix refcount leak in cns3xxx_init MAINTAINERS: Update email address arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region ARM: dts: bcm2711-rpi-400: Fix GPIO line names bus: bt1-axi: Don't print error on -EPROBE_DEFER bus: bt1-apb: Don't print error on -EPROBE_DEFER ARM: Fix refcount leak in axxia_boot_secondary ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15 soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity ARM: dts: imx6qdl: correct PU regulator ramp delay firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe MAINTAINERS: Update BCM2711/BCM2835 maintainer ...
2024-11-21 19:41:42 +00:00 · 2022-06-26 14:12:56 -07:00 · 2022-06-26 14:12:56 -07:00 · 1709b88739
commit 1709b88739
parent 413c1f1491 7f05811287
37 changed files with 205 additions and 193 deletions
--- a/9
+++ b/9
@ -2469,6 +2469,7 @@ ARM/NXP S32G ARCHITECTURE
 M:	Chester Lin <clin@suse.com>
 R:	Andreas Färber <afaerber@suse.de>
 R:	Matthias Brugger <mbrugger@suse.com>
+R:	NXP S32 Linux Team <s32@nxp.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm64/boot/dts/freescale/s32g*.dts*
@ -3812,12 +3813,12 @@ N:	bcmbca
 N:	bcm[9]?47622

 BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE
-M:	Nicolas Saenz Julienne <nsaenz@kernel.org>
+M:	Florian Fainelli <f.fainelli@gmail.com>
 R:	Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
 L:	linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nsaenz/linux-rpi.git
+T:	git git://github.com/broadcom/stblinux.git
 F:	Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
 F:	drivers/pci/controller/pcie-brcmstb.c
 F:	drivers/staging/vc04_services
@ -16536,7 +16537,7 @@ F:	Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
 F:	drivers/cpufreq/qcom-cpufreq-nvmem.c

 QUALCOMM CRYPTO DRIVERS
-M:	Thara Gopinath <thara.gopinath@linaro.org>
+M:	Thara Gopinath <thara.gopinath@gmail.com>
 L:	linux-crypto@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
@ -16647,7 +16648,7 @@ F:	include/linux/if_rmnet.h

 QUALCOMM TSENS THERMAL DRIVER
 M:	Amit Kucheria <amitk@kernel.org>
-M:	Thara Gopinath <thara.gopinath@linaro.org>
+M:	Thara Gopinath <thara.gopinath@gmail.com>
 L:	linux-pm@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@ -1586,7 +1586,6 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-lenovo-hr630.dtb \
 	aspeed-bmc-lenovo-hr855xg2.dtb \
 	aspeed-bmc-microsoft-olympus.dtb \
-	aspeed-bmc-nuvia-dc-scm.dtb \
 	aspeed-bmc-opp-lanyang.dtb \
 	aspeed-bmc-opp-mihawk.dtb \
 	aspeed-bmc-opp-mowgli.dtb \
@ -1599,6 +1598,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-opp-witherspoon.dtb \
 	aspeed-bmc-opp-zaius.dtb \
 	aspeed-bmc-portwell-neptune.dtb \
+	aspeed-bmc-qcom-dc-scm-v1.dtb \
 	aspeed-bmc-quanta-q71l.dtb \
 	aspeed-bmc-quanta-s6q.dtb \
 	aspeed-bmc-supermicro-x11spi.dtb \
--- a/arch/arm/boot/dts/aspeed-bmc-qcom-dc-scm-v1.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-qcom-dc-scm-v1.dts
@ -6,8 +6,8 @@
 #include "aspeed-g6.dtsi"

 / {
-	model = "Nuvia DC-SCM BMC";
-	compatible = "nuvia,dc-scm-bmc", "aspeed,ast2600";
+	model = "Qualcomm DC-SCM V1 BMC";
+	compatible = "qcom,dc-scm-v1-bmc", "aspeed,ast2600";

 	aliases {
 		serial4 = &uart5;
--- a/arch/arm/boot/dts/bcm2711-rpi-400.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-400.dts
@ -28,12 +28,12 @@
 &expgpio {
 	gpio-line-names = "BT_ON",
 			  "WL_ON",
-			  "",
+			  "PWR_LED_OFF",
 			  "GLOBAL_RESET",
 			  "VDD_SD_IO_SEL",
-			  "CAM_GPIO",
+			  "GLOBAL_SHUTDOWN",
 			  "SD_PWR_ON",
-			  "SD_OC_N";
+			  "SHUTDOWN_REQUEST";
 };

 &genet_mdio {
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@ -593,7 +593,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_atmel_conn>;
 		reg = <0x4a>;
-		reset-gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;	/* SODIMM 106 */
+		reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;	/* SODIMM 106 */
 		status = "disabled";
 	};
 };
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@ -762,7 +762,7 @@
 					regulator-name = "vddpu";
 					regulator-min-microvolt = <725000>;
 					regulator-max-microvolt = <1450000>;
-					regulator-enable-ramp-delay = <150>;
+					regulator-enable-ramp-delay = <380>;
 					anatop-reg-offset = <0x140>;
 					anatop-vol-bit-shift = <9>;
 					anatop-vol-bit-width = <5>;
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@ -120,6 +120,7 @@
 		compatible = "usb-nop-xceiv";
 		clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
 		clock-names = "main_clk";
+		power-domains = <&pgc_hsic_phy>;
 		#phy-cells = <0>;
 	};

@ -1153,7 +1154,6 @@
 				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
 				reg = <0x30b30000 0x200>;
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-				power-domains = <&pgc_hsic_phy>;
 				clocks = <&clks IMX7D_USB_CTRL_CLK>;
 				fsl,usbphy = <&usbphynop3>;
 				fsl,usbmisc = <&usbmisc3 0>;
--- a/arch/arm/boot/dts/stm32mp15-scmi.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-scmi.dtsi
@ -0,0 +1,47 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2022 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+/ {
+	firmware {
+		optee: optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		scmi: scmi {
+			compatible = "linaro,scmi-optee";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linaro,optee-channel-id = <0>;
+			shmem = <&scmi_shm>;
+
+			scmi_clk: protocol@14 {
+				reg = <0x14>;
+				#clock-cells = <1>;
+			};
+
+			scmi_reset: protocol@16 {
+				reg = <0x16>;
+				#reset-cells = <1>;
+			};
+		};
+	};
+
+	soc {
+		scmi_sram: sram@2ffff000 {
+			compatible = "mmio-sram";
+			reg = <0x2ffff000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x2ffff000 0x1000>;
+
+			scmi_shm: scmi-sram@0 {
+				compatible = "arm,scmi-shmem";
+				reg = <0 0x80>;
+			};
+		};
+	};
+};
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@ -115,33 +115,6 @@
 		status = "disabled";
 	};

-	firmware {
-		optee: optee {
-			compatible = "linaro,optee-tz";
-			method = "smc";
-			status = "disabled";
-		};
-
-		scmi: scmi {
-			compatible = "linaro,scmi-optee";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			linaro,optee-channel-id = <0>;
-			shmem = <&scmi_shm>;
-			status = "disabled";
-
-			scmi_clk: protocol@14 {
-				reg = <0x14>;
-				#clock-cells = <1>;
-			};
-
-			scmi_reset: protocol@16 {
-				reg = <0x16>;
-				#reset-cells = <1>;
-			};
-		};
-	};
-
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@ -149,20 +122,6 @@
 		interrupt-parent = <&intc>;
 		ranges;

-		scmi_sram: sram@2ffff000 {
-			compatible = "mmio-sram";
-			reg = <0x2ffff000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x2ffff000 0x1000>;
-
-			scmi_shm: scmi-sram@0 {
-				compatible = "arm,scmi-shmem";
-				reg = <0 0x80>;
-				status = "disabled";
-			};
-		};
-
 		timers2: timer@40000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
--- a/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts
+++ b/arch/arm/boot/dts/stm32mp157a-dk1-scmi.dts
@ -7,6 +7,7 @@
 /dts-v1/;

 #include "stm32mp157a-dk1.dts"
+#include "stm32mp15-scmi.dtsi"

 / {
 	model = "STMicroelectronics STM32MP157A-DK1 SCMI Discovery Board";
@ -54,10 +55,6 @@
 	resets = <&scmi_reset RST_SCMI_MCU>;
 };

-&optee {
-	status = "okay";
-};
-
 &rcc {
 	compatible = "st,stm32mp1-rcc-secure", "syscon";
 	clock-names = "hse", "hsi", "csi", "lse", "lsi";
@ -76,11 +73,3 @@
 &rtc {
 	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
 };
-
-&scmi {
-	status = "okay";
-};
-
-&scmi_shm {
-	status = "okay";
-};
--- a/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts
+++ b/arch/arm/boot/dts/stm32mp157c-dk2-scmi.dts
@ -7,6 +7,7 @@
 /dts-v1/;

 #include "stm32mp157c-dk2.dts"
+#include "stm32mp15-scmi.dtsi"

 / {
 	model = "STMicroelectronics STM32MP157C-DK2 SCMI Discovery Board";
@ -63,10 +64,6 @@
 	resets = <&scmi_reset RST_SCMI_MCU>;
 };

-&optee {
-	status = "okay";
-};
-
 &rcc {
 	compatible = "st,stm32mp1-rcc-secure", "syscon";
 	clock-names = "hse", "hsi", "csi", "lse", "lsi";
@ -85,11 +82,3 @@
 &rtc {
 	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
 };
-
-&scmi {
-	status = "okay";
-};
-
-&scmi_shm {
-	status = "okay";
-};
--- a/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1-scmi.dts
@ -7,6 +7,7 @@
 /dts-v1/;

 #include "stm32mp157c-ed1.dts"
+#include "stm32mp15-scmi.dtsi"

 / {
 	model = "STMicroelectronics STM32MP157C-ED1 SCMI eval daughter";
@ -59,10 +60,6 @@
 	resets = <&scmi_reset RST_SCMI_MCU>;
 };

-&optee {
-	status = "okay";
-};
-
 &rcc {
 	compatible = "st,stm32mp1-rcc-secure", "syscon";
 	clock-names = "hse", "hsi", "csi", "lse", "lsi";
@ -81,11 +78,3 @@
 &rtc {
 	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
 };
-
-&scmi {
-	status = "okay";
-};
-
-&scmi_shm {
-	status = "okay";
-};
--- a/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1-scmi.dts
@ -7,6 +7,7 @@
 /dts-v1/;

 #include "stm32mp157c-ev1.dts"
+#include "stm32mp15-scmi.dtsi"

 / {
 	model = "STMicroelectronics STM32MP157C-EV1 SCMI eval daughter on eval mother";
@ -68,10 +69,6 @@
 	resets = <&scmi_reset RST_SCMI_MCU>;
 };

-&optee {
-	status = "okay";
-};
-
 &rcc {
 	compatible = "st,stm32mp1-rcc-secure", "syscon";
 	clock-names = "hse", "hsi", "csi", "lse", "lsi";
@ -90,11 +87,3 @@
 &rtc {
 	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
 };
-
-&scmi {
-	status = "okay";
-};
-
-&scmi_shm {
-	status = "okay";
-};
--- a/arch/arm/mach-axxia/platsmp.c
+++ b/arch/arm/mach-axxia/platsmp.c
@ -39,6 +39,7 @@ static int axxia_boot_secondary(unsigned int cpu, struct task_struct *idle)
 		return -ENOENT;

 	syscon = of_iomap(syscon_np, 0);
+	of_node_put(syscon_np);
 	if (!syscon)
 		return -ENOMEM;

--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@ -372,6 +372,7 @@ static void __init cns3xxx_init(void)
 		/* De-Asscer SATA Reset */
 		cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA));
 	}
+	of_node_put(dn);

 	dn = of_find_compatible_node(NULL, NULL, "cavium,cns3420-sdhci");
 	if (of_device_is_available(dn)) {
@ -385,6 +386,7 @@ static void __init cns3xxx_init(void)
 		cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO));
 		cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO));
 	}
+	of_node_put(dn);

 	pm_power_off = cns3xxx_power_off;

--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@ -149,6 +149,7 @@ static void exynos_map_pmu(void)
 	np = of_find_matching_node(NULL, exynos_dt_pmu_match);
 	if (np)
 		pmu_base_addr = of_iomap(np, 0);
+	of_node_put(np);
 }

 static void __init exynos_init_irq(void)
--- a/arch/arm/mach-spear/time.c
+++ b/arch/arm/mach-spear/time.c
@ -218,13 +218,13 @@ void __init spear_setup_of_timer(void)
 	irq = irq_of_parse_and_map(np, 0);
 	if (!irq) {
 		pr_err("%s: No irq passed for timer via DT\n", __func__);
-		return;
+		goto err_put_np;
 	}

 	gpt_base = of_iomap(np, 0);
 	if (!gpt_base) {
 		pr_err("%s: of iomap failed\n", __func__);
-		return;
+		goto err_put_np;
 	}

 	gpt_clk = clk_get_sys("gpt0", NULL);
@ -239,6 +239,8 @@ void __init spear_setup_of_timer(void)
 		goto err_prepare_enable_clk;
 	}

+	of_node_put(np);
+
 	spear_clockevent_init(irq);
 	spear_clocksource_init();

@ -248,4 +250,6 @@ err_prepare_enable_clk:
 	clk_put(gpt_clk);
 err_iomap:
 	iounmap(gpt_base);
+err_put_np:
+	of_node_put(np);
 }
--- a/arch/arm64/boot/dts/exynos/exynos7885.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7885.dtsi
@ -280,8 +280,8 @@
 			interrupts = <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart0_bus>;
-			clocks = <&cmu_peri CLK_GOUT_UART0_EXT_UCLK>,
-				 <&cmu_peri CLK_GOUT_UART0_PCLK>;
+			clocks = <&cmu_peri CLK_GOUT_UART0_PCLK>,
+				 <&cmu_peri CLK_GOUT_UART0_EXT_UCLK>;
 			clock-names = "uart", "clk_uart_baud0";
 			samsung,uart-fifosize = <64>;
 			status = "disabled";
@ -293,8 +293,8 @@
 			interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart1_bus>;
-			clocks = <&cmu_peri CLK_GOUT_UART1_EXT_UCLK>,
-				 <&cmu_peri CLK_GOUT_UART1_PCLK>;
+			clocks = <&cmu_peri CLK_GOUT_UART1_PCLK>,
+				 <&cmu_peri CLK_GOUT_UART1_EXT_UCLK>;
 			clock-names = "uart", "clk_uart_baud0";
 			samsung,uart-fifosize = <256>;
 			status = "disabled";
@ -306,8 +306,8 @@
 			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&uart2_bus>;
-			clocks = <&cmu_peri CLK_GOUT_UART2_EXT_UCLK>,
-				 <&cmu_peri CLK_GOUT_UART2_PCLK>;
+			clocks = <&cmu_peri CLK_GOUT_UART2_PCLK>,
+				 <&cmu_peri CLK_GOUT_UART2_EXT_UCLK>;
 			clock-names = "uart", "clk_uart_baud0";
 			samsung,uart-fifosize = <256>;
 			status = "disabled";
--- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
@ -79,7 +79,7 @@
 		};
 	};

-	soc {
+	soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@ -456,13 +456,11 @@
 		clock-names = "clk_ahb", "clk_xin";
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
-		mmc-hs400-1_8v;
 		ti,trm-icp = <0x2>;
 		ti,otap-del-sel-legacy = <0x0>;
 		ti,otap-del-sel-mmc-hs = <0x0>;
 		ti,otap-del-sel-ddr52 = <0x6>;
 		ti,otap-del-sel-hs200 = <0x7>;
-		ti,otap-del-sel-hs400 = <0x4>;
 	};

 	sdhci1: mmc@fa00000 {
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@ -33,7 +33,7 @@
 		ranges;
 		#interrupt-cells = <3>;
 		interrupt-controller;
-		reg = <0x00 0x01800000 0x00 0x200000>, /* GICD */
+		reg = <0x00 0x01800000 0x00 0x100000>, /* GICD */
 		      <0x00 0x01900000 0x00 0x100000>, /* GICR */
 		      <0x00 0x6f000000 0x00 0x2000>,   /* GICC */
 		      <0x00 0x6f010000 0x00 0x1000>,   /* GICH */
--- a/drivers/bus/bt1-apb.c
+++ b/drivers/bus/bt1-apb.c
@ -175,10 +175,9 @@ static int bt1_apb_request_rst(struct bt1_apb *apb)
 	int ret;

 	apb->prst = devm_reset_control_get_optional_exclusive(apb->dev, "prst");
-	if (IS_ERR(apb->prst)) {
-		dev_warn(apb->dev, "Couldn't get reset control line\n");
-		return PTR_ERR(apb->prst);
-	}
+	if (IS_ERR(apb->prst))
+		return dev_err_probe(apb->dev, PTR_ERR(apb->prst),
+				     "Couldn't get reset control line\n");

 	ret = reset_control_deassert(apb->prst);
 	if (ret)
@ -199,10 +198,9 @@ static int bt1_apb_request_clk(struct bt1_apb *apb)
 	int ret;

 	apb->pclk = devm_clk_get(apb->dev, "pclk");
-	if (IS_ERR(apb->pclk)) {
-		dev_err(apb->dev, "Couldn't get APB clock descriptor\n");
-		return PTR_ERR(apb->pclk);
-	}
+	if (IS_ERR(apb->pclk))
+		return dev_err_probe(apb->dev, PTR_ERR(apb->pclk),
+				     "Couldn't get APB clock descriptor\n");

 	ret = clk_prepare_enable(apb->pclk);
 	if (ret) {
--- a/drivers/bus/bt1-axi.c
+++ b/drivers/bus/bt1-axi.c
@ -135,10 +135,9 @@ static int bt1_axi_request_rst(struct bt1_axi *axi)
 	int ret;

 	axi->arst = devm_reset_control_get_optional_exclusive(axi->dev, "arst");
-	if (IS_ERR(axi->arst)) {
-		dev_warn(axi->dev, "Couldn't get reset control line\n");
-		return PTR_ERR(axi->arst);
-	}
+	if (IS_ERR(axi->arst))
+		return dev_err_probe(axi->dev, PTR_ERR(axi->arst),
+				     "Couldn't get reset control line\n");

 	ret = reset_control_deassert(axi->arst);
 	if (ret)
@ -159,10 +158,9 @@ static int bt1_axi_request_clk(struct bt1_axi *axi)
 	int ret;

 	axi->aclk = devm_clk_get(axi->dev, "aclk");
-	if (IS_ERR(axi->aclk)) {
-		dev_err(axi->dev, "Couldn't get AXI Interconnect clock\n");
-		return PTR_ERR(axi->aclk);
-	}
+	if (IS_ERR(axi->aclk))
+		return dev_err_probe(axi->dev, PTR_ERR(axi->aclk),
+				     "Couldn't get AXI Interconnect clock\n");

 	ret = clk_prepare_enable(axi->aclk);
 	if (ret) {
--- a/drivers/firmware/arm_scmi/base.c
+++ b/drivers/firmware/arm_scmi/base.c
@ -36,7 +36,7 @@ struct scmi_msg_resp_base_attributes {

 struct scmi_msg_resp_base_discover_agent {
 	__le32 agent_id;
-	u8 name[SCMI_MAX_STR_SIZE];
+	u8 name[SCMI_SHORT_NAME_MAX_SIZE];
 };


@ -119,7 +119,7 @@ scmi_base_vendor_id_get(const struct scmi_protocol_handle *ph, bool sub_vendor)

 	ret = ph->xops->do_xfer(ph, t);
 	if (!ret)
-		memcpy(vendor_id, t->rx.buf, size);
+		strscpy(vendor_id, t->rx.buf, size);

 	ph->xops->xfer_put(ph, t);

@ -221,11 +221,17 @@ scmi_base_implementation_list_get(const struct scmi_protocol_handle *ph,
 		calc_list_sz = (1 + (loop_num_ret - 1) / sizeof(u32)) *
 				sizeof(u32);
 		if (calc_list_sz != real_list_sz) {
-			dev_err(dev,
-				"Malformed reply - real_sz:%zd  calc_sz:%u\n",
-				real_list_sz, calc_list_sz);
-			ret = -EPROTO;
-			break;
+			dev_warn(dev,
+				 "Malformed reply - real_sz:%zd  calc_sz:%u  (loop_num_ret:%d)\n",
+				 real_list_sz, calc_list_sz, loop_num_ret);
+			/*
+			 * Bail out if the expected list size is bigger than the
+			 * total payload size of the received reply.
+			 */
+			if (calc_list_sz > real_list_sz) {
+				ret = -EPROTO;
+				break;
+			}
 		}

 		for (loop = 0; loop < loop_num_ret; loop++)
@ -270,7 +276,7 @@ static int scmi_base_discover_agent_get(const struct scmi_protocol_handle *ph,
 	ret = ph->xops->do_xfer(ph, t);
 	if (!ret) {
 		agent_info = t->rx.buf;
-		strlcpy(name, agent_info->name, SCMI_MAX_STR_SIZE);
+		strscpy(name, agent_info->name, SCMI_SHORT_NAME_MAX_SIZE);
 	}

 	ph->xops->xfer_put(ph, t);
@ -369,7 +375,7 @@ static int scmi_base_protocol_init(const struct scmi_protocol_handle *ph)
 	int id, ret;
 	u8 *prot_imp;
 	u32 version;
-	char name[SCMI_MAX_STR_SIZE];
+	char name[SCMI_SHORT_NAME_MAX_SIZE];
 	struct device *dev = ph->dev;
 	struct scmi_revision_info *rev = scmi_revision_area_get(ph);

--- a/drivers/firmware/arm_scmi/clock.c
+++ b/drivers/firmware/arm_scmi/clock.c
@ -153,7 +153,7 @@ static int scmi_clock_attributes_get(const struct scmi_protocol_handle *ph,
 	if (!ret) {
 		u32 latency = 0;
 		attributes = le32_to_cpu(attr->attributes);
-		strlcpy(clk->name, attr->name, SCMI_MAX_STR_SIZE);
+		strscpy(clk->name, attr->name, SCMI_SHORT_NAME_MAX_SIZE);
 		/* clock_enable_latency field is present only since SCMI v3.1 */
 		if (PROTOCOL_REV_MAJOR(version) >= 0x2)
 			latency = le32_to_cpu(attr->clock_enable_latency);
@ -266,9 +266,7 @@ scmi_clock_describe_rates_get(const struct scmi_protocol_handle *ph, u32 clk_id,
 			      struct scmi_clock_info *clk)
 {
 	int ret;
-
 	void *iter;
-	struct scmi_msg_clock_describe_rates *msg;
 	struct scmi_iterator_ops ops = {
 		.prepare_message = iter_clk_describe_prepare_message,
 		.update_state = iter_clk_describe_update_state,
@ -281,7 +279,8 @@ scmi_clock_describe_rates_get(const struct scmi_protocol_handle *ph, u32 clk_id,

 	iter = ph->hops->iter_response_init(ph, &ops, SCMI_MAX_NUM_RATES,
 					    CLOCK_DESCRIBE_RATES,
-					    sizeof(*msg), &cpriv);
+					    sizeof(struct scmi_msg_clock_describe_rates),
+					    &cpriv);
 	if (IS_ERR(iter))
 		return PTR_ERR(iter);

--- a/drivers/firmware/arm_scmi/perf.c
+++ b/drivers/firmware/arm_scmi/perf.c
@ -252,7 +252,7 @@ scmi_perf_domain_attributes_get(const struct scmi_protocol_handle *ph,
 			dom_info->mult_factor =
 					(dom_info->sustained_freq_khz * 1000) /
 					dom_info->sustained_perf_level;
-		strlcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
+		strscpy(dom_info->name, attr->name, SCMI_SHORT_NAME_MAX_SIZE);
 	}

 	ph->xops->xfer_put(ph, t);
@ -332,7 +332,6 @@ scmi_perf_describe_levels_get(const struct scmi_protocol_handle *ph, u32 domain,
 {
 	int ret;
 	void *iter;
-	struct scmi_msg_perf_describe_levels *msg;
 	struct scmi_iterator_ops ops = {
 		.prepare_message = iter_perf_levels_prepare_message,
 		.update_state = iter_perf_levels_update_state,
@ -345,7 +344,8 @@ scmi_perf_describe_levels_get(const struct scmi_protocol_handle *ph, u32 domain,

 	iter = ph->hops->iter_response_init(ph, &ops, MAX_OPPS,
 					    PERF_DESCRIBE_LEVELS,
-					    sizeof(*msg), &ppriv);
+					    sizeof(struct scmi_msg_perf_describe_levels),
+					    &ppriv);
 	if (IS_ERR(iter))
 		return PTR_ERR(iter);

--- a/drivers/firmware/arm_scmi/power.c
+++ b/drivers/firmware/arm_scmi/power.c
@ -122,7 +122,7 @@ scmi_power_domain_attributes_get(const struct scmi_protocol_handle *ph,
 		dom_info->state_set_notify = SUPPORTS_STATE_SET_NOTIFY(flags);
 		dom_info->state_set_async = SUPPORTS_STATE_SET_ASYNC(flags);
 		dom_info->state_set_sync = SUPPORTS_STATE_SET_SYNC(flags);
-		strlcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
+		strscpy(dom_info->name, attr->name, SCMI_SHORT_NAME_MAX_SIZE);
 	}
 	ph->xops->xfer_put(ph, t);

--- a/drivers/firmware/arm_scmi/protocols.h
+++ b/drivers/firmware/arm_scmi/protocols.h
@ -24,8 +24,6 @@

 #include <asm/unaligned.h>

-#define SCMI_SHORT_NAME_MAX_SIZE	16
-
 #define PROTOCOL_REV_MINOR_MASK	GENMASK(15, 0)
 #define PROTOCOL_REV_MAJOR_MASK	GENMASK(31, 16)
 #define PROTOCOL_REV_MAJOR(x)	((u16)(FIELD_GET(PROTOCOL_REV_MAJOR_MASK, (x))))
--- a/drivers/firmware/arm_scmi/reset.c
+++ b/drivers/firmware/arm_scmi/reset.c
@ -116,7 +116,7 @@ scmi_reset_domain_attributes_get(const struct scmi_protocol_handle *ph,
 		dom_info->latency_us = le32_to_cpu(attr->latency);
 		if (dom_info->latency_us == U32_MAX)
 			dom_info->latency_us = 0;
-		strlcpy(dom_info->name, attr->name, SCMI_MAX_STR_SIZE);
+		strscpy(dom_info->name, attr->name, SCMI_SHORT_NAME_MAX_SIZE);
 	}

 	ph->xops->xfer_put(ph, t);
--- a/drivers/firmware/arm_scmi/sensors.c
+++ b/drivers/firmware/arm_scmi/sensors.c
@ -338,7 +338,6 @@ static int scmi_sensor_update_intervals(const struct scmi_protocol_handle *ph,
 					struct scmi_sensor_info *s)
 {
 	void *iter;
-	struct scmi_msg_sensor_list_update_intervals *msg;
 	struct scmi_iterator_ops ops = {
 		.prepare_message = iter_intervals_prepare_message,
 		.update_state = iter_intervals_update_state,
@ -351,22 +350,28 @@ static int scmi_sensor_update_intervals(const struct scmi_protocol_handle *ph,

 	iter = ph->hops->iter_response_init(ph, &ops, s->intervals.count,
 					    SENSOR_LIST_UPDATE_INTERVALS,
-					    sizeof(*msg), &upriv);
+					    sizeof(struct scmi_msg_sensor_list_update_intervals),
+					    &upriv);
 	if (IS_ERR(iter))
 		return PTR_ERR(iter);

 	return ph->hops->iter_response_run(iter);
 }

+struct scmi_apriv {
+	bool any_axes_support_extended_names;
+	struct scmi_sensor_info *s;
+};
+
 static void iter_axes_desc_prepare_message(void *message,
 					   const unsigned int desc_index,
 					   const void *priv)
 {
 	struct scmi_msg_sensor_axis_description_get *msg = message;
-	const struct scmi_sensor_info *s = priv;
+	const struct scmi_apriv *apriv = priv;

 	/* Set the number of sensors to be skipped/already read */
-	msg->id = cpu_to_le32(s->id);
+	msg->id = cpu_to_le32(apriv->s->id);
 	msg->axis_desc_index = cpu_to_le32(desc_index);
 }

@ -393,19 +398,21 @@ iter_axes_desc_process_response(const struct scmi_protocol_handle *ph,
 	u32 attrh, attrl;
 	struct scmi_sensor_axis_info *a;
 	size_t dsize = SCMI_MSG_RESP_AXIS_DESCR_BASE_SZ;
-	struct scmi_sensor_info *s = priv;
+	struct scmi_apriv *apriv = priv;
 	const struct scmi_axis_descriptor *adesc = st->priv;

 	attrl = le32_to_cpu(adesc->attributes_low);
+	if (SUPPORTS_EXTENDED_AXIS_NAMES(attrl))
+		apriv->any_axes_support_extended_names = true;

-	a = &s->axis[st->desc_index + st->loop_idx];
+	a = &apriv->s->axis[st->desc_index + st->loop_idx];
 	a->id = le32_to_cpu(adesc->id);
 	a->extended_attrs = SUPPORTS_EXTEND_ATTRS(attrl);

 	attrh = le32_to_cpu(adesc->attributes_high);
 	a->scale = S32_EXT(SENSOR_SCALE(attrh));
 	a->type = SENSOR_TYPE(attrh);
-	strscpy(a->name, adesc->name, SCMI_MAX_STR_SIZE);
+	strscpy(a->name, adesc->name, SCMI_SHORT_NAME_MAX_SIZE);

 	if (a->extended_attrs) {
 		unsigned int ares = le32_to_cpu(adesc->resolution);
@ -444,10 +451,19 @@ iter_axes_extended_name_process_response(const struct scmi_protocol_handle *ph,
 					 void *priv)
 {
 	struct scmi_sensor_axis_info *a;
-	const struct scmi_sensor_info *s = priv;
+	const struct scmi_apriv *apriv = priv;
 	struct scmi_sensor_axis_name_descriptor *adesc = st->priv;
+	u32 axis_id = le32_to_cpu(adesc->axis_id);

-	a = &s->axis[st->desc_index + st->loop_idx];
+	if (axis_id >= st->max_resources)
+		return -EPROTO;
+
+	/*
+	 * Pick the corresponding descriptor based on the axis_id embedded
+	 * in the reply since the list of axes supporting extended names
+	 * can be a subset of all the axes.
+	 */
+	a = &apriv->s->axis[axis_id];
 	strscpy(a->name, adesc->name, SCMI_MAX_STR_SIZE);
 	st->priv = ++adesc;

@ -458,21 +474,36 @@ static int
 scmi_sensor_axis_extended_names_get(const struct scmi_protocol_handle *ph,
 				    struct scmi_sensor_info *s)
 {
+	int ret;
 	void *iter;
-	struct scmi_msg_sensor_axis_description_get *msg;
 	struct scmi_iterator_ops ops = {
 		.prepare_message = iter_axes_desc_prepare_message,
 		.update_state = iter_axes_extended_name_update_state,
 		.process_response = iter_axes_extended_name_process_response,
 	};
+	struct scmi_apriv apriv = {
+		.any_axes_support_extended_names = false,
+		.s = s,
+	};

 	iter = ph->hops->iter_response_init(ph, &ops, s->num_axis,
 					    SENSOR_AXIS_NAME_GET,
-					    sizeof(*msg), s);
+					    sizeof(struct scmi_msg_sensor_axis_description_get),
+					    &apriv);
 	if (IS_ERR(iter))
 		return PTR_ERR(iter);

-	return ph->hops->iter_response_run(iter);
+	/*
+	 * Do not cause whole protocol initialization failure when failing to
+	 * get extended names for axes.
+	 */
+	ret = ph->hops->iter_response_run(iter);
+	if (ret)
+		dev_warn(ph->dev,
+			 "Failed to get axes extended names for %s (ret:%d).\n",
+			 s->name, ret);
+
+	return 0;
 }

 static int scmi_sensor_axis_description(const struct scmi_protocol_handle *ph,
@ -481,12 +512,15 @@ static int scmi_sensor_axis_description(const struct scmi_protocol_handle *ph,
 {
 	int ret;
 	void *iter;
-	struct scmi_msg_sensor_axis_description_get *msg;
 	struct scmi_iterator_ops ops = {
 		.prepare_message = iter_axes_desc_prepare_message,
 		.update_state = iter_axes_desc_update_state,
 		.process_response = iter_axes_desc_process_response,
 	};
+	struct scmi_apriv apriv = {
+		.any_axes_support_extended_names = false,
+		.s = s,
+	};

 	s->axis = devm_kcalloc(ph->dev, s->num_axis,
 			       sizeof(*s->axis), GFP_KERNEL);
@ -495,7 +529,8 @@ static int scmi_sensor_axis_description(const struct scmi_protocol_handle *ph,

 	iter = ph->hops->iter_response_init(ph, &ops, s->num_axis,
 					    SENSOR_AXIS_DESCRIPTION_GET,
-					    sizeof(*msg), s);
+					    sizeof(struct scmi_msg_sensor_axis_description_get),
+					    &apriv);
 	if (IS_ERR(iter))
 		return PTR_ERR(iter);

@ -503,7 +538,8 @@ static int scmi_sensor_axis_description(const struct scmi_protocol_handle *ph,
 	if (ret)
 		return ret;

-	if (PROTOCOL_REV_MAJOR(version) >= 0x3)
+	if (PROTOCOL_REV_MAJOR(version) >= 0x3 &&
+	    apriv.any_axes_support_extended_names)
 		ret = scmi_sensor_axis_extended_names_get(ph, s);

 	return ret;
@ -598,7 +634,7 @@ iter_sens_descr_process_response(const struct scmi_protocol_handle *ph,
 			    SUPPORTS_AXIS(attrh) ?
 			    SENSOR_AXIS_NUMBER(attrh) : 0,
 			    SCMI_MAX_NUM_SENSOR_AXIS);
-	strscpy(s->name, sdesc->name, SCMI_MAX_STR_SIZE);
+	strscpy(s->name, sdesc->name, SCMI_SHORT_NAME_MAX_SIZE);

 	/*
 	 * If supported overwrite short name with the extended
--- a/drivers/firmware/arm_scmi/voltage.c
+++ b/drivers/firmware/arm_scmi/voltage.c
@ -180,7 +180,6 @@ static int scmi_voltage_levels_get(const struct scmi_protocol_handle *ph,
 {
 	int ret;
 	void *iter;
-	struct scmi_msg_cmd_describe_levels *msg;
 	struct scmi_iterator_ops ops = {
 		.prepare_message = iter_volt_levels_prepare_message,
 		.update_state = iter_volt_levels_update_state,
@ -193,7 +192,8 @@ static int scmi_voltage_levels_get(const struct scmi_protocol_handle *ph,

 	iter = ph->hops->iter_response_init(ph, &ops, v->num_levels,
 					    VOLTAGE_DESCRIBE_LEVELS,
-					    sizeof(*msg), &vpriv);
+					    sizeof(struct scmi_msg_cmd_describe_levels),
+					    &vpriv);
 	if (IS_ERR(iter))
 		return PTR_ERR(iter);

@ -225,15 +225,14 @@ static int scmi_voltage_descriptors_get(const struct scmi_protocol_handle *ph,

 		/* Retrieve domain attributes at first ... */
 		put_unaligned_le32(dom, td->tx.buf);
-		ret = ph->xops->do_xfer(ph, td);
 		/* Skip domain on comms error */
-		if (ret)
+		if (ph->xops->do_xfer(ph, td))
 			continue;

 		v = vinfo->domains + dom;
 		v->id = dom;
 		attributes = le32_to_cpu(resp_dom->attr);
-		strlcpy(v->name, resp_dom->name, SCMI_MAX_STR_SIZE);
+		strscpy(v->name, resp_dom->name, SCMI_SHORT_NAME_MAX_SIZE);

 		/*
 		 * If supported overwrite short name with the extended one;
@ -249,12 +248,8 @@ static int scmi_voltage_descriptors_get(const struct scmi_protocol_handle *ph,
 				v->async_level_set = true;
 		}

-		ret = scmi_voltage_levels_get(ph, v);
 		/* Skip invalid voltage descriptors */
-		if (ret)
-			continue;
-
-		ph->xops->reset_rx_to_maxsz(ph, td);
+		scmi_voltage_levels_get(ph, v);
 	}

 	ph->xops->xfer_put(ph, td);
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@ -105,6 +105,7 @@ config TI_EMIF
 config OMAP_GPMC
 	tristate "Texas Instruments OMAP SoC GPMC driver"
 	depends on OF_ADDRESS
+	depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
 	select GPIOLIB
 	help
 	  This driver is for the General Purpose Memory Controller (GPMC)
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@ -404,13 +404,16 @@ static int mtk_smi_device_link_common(struct device *dev, struct device **com_de
 	of_node_put(smi_com_node);
 	if (smi_com_pdev) {
 		/* smi common is the supplier, Make sure it is ready before */
-		if (!platform_get_drvdata(smi_com_pdev))
+		if (!platform_get_drvdata(smi_com_pdev)) {
+			put_device(&smi_com_pdev->dev);
 			return -EPROBE_DEFER;
+		}
 		smi_com_dev = &smi_com_pdev->dev;
 		link = device_link_add(dev, smi_com_dev,
 				       DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
 		if (!link) {
 			dev_err(dev, "Unable to link smi-common dev\n");
+			put_device(&smi_com_pdev->dev);
 			return -ENODEV;
 		}
 		*com_dev = smi_com_dev;
--- a/drivers/memory/samsung/exynos5422-dmc.c
+++ b/drivers/memory/samsung/exynos5422-dmc.c
@ -1187,33 +1187,39 @@ static int of_get_dram_timings(struct exynos5_dmc *dmc)

 	dmc->timing_row = devm_kmalloc_array(dmc->dev, TIMING_COUNT,
 					     sizeof(u32), GFP_KERNEL);
-	if (!dmc->timing_row)
-		return -ENOMEM;
+	if (!dmc->timing_row) {
+		ret = -ENOMEM;
+		goto put_node;
+	}

 	dmc->timing_data = devm_kmalloc_array(dmc->dev, TIMING_COUNT,
 					      sizeof(u32), GFP_KERNEL);
-	if (!dmc->timing_data)
-		return -ENOMEM;
+	if (!dmc->timing_data) {
+		ret = -ENOMEM;
+		goto put_node;
+	}

 	dmc->timing_power = devm_kmalloc_array(dmc->dev, TIMING_COUNT,
 					       sizeof(u32), GFP_KERNEL);
-	if (!dmc->timing_power)
-		return -ENOMEM;
+	if (!dmc->timing_power) {
+		ret = -ENOMEM;
+		goto put_node;
+	}

 	dmc->timings = of_lpddr3_get_ddr_timings(np_ddr, dmc->dev,
 						 DDR_TYPE_LPDDR3,
 						 &dmc->timings_arr_size);
 	if (!dmc->timings) {
-		of_node_put(np_ddr);
 		dev_warn(dmc->dev, "could not get timings from DT\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto put_node;
 	}

 	dmc->min_tck = of_lpddr3_get_min_tck(np_ddr, dmc->dev);
 	if (!dmc->min_tck) {
-		of_node_put(np_ddr);
 		dev_warn(dmc->dev, "could not get tck from DT\n");
-		return -EINVAL;
+		ret = -EINVAL;
+		goto put_node;
 	}

 	/* Sorted array of OPPs with frequency ascending */
@ -1227,13 +1233,14 @@ static int of_get_dram_timings(struct exynos5_dmc *dmc)
 					     clk_period_ps);
 	}

-	of_node_put(np_ddr);

 	/* Take the highest frequency's timings as 'bypass' */
 	dmc->bypass_timing_row = dmc->timing_row[idx - 1];
 	dmc->bypass_timing_data = dmc->timing_data[idx - 1];
 	dmc->bypass_timing_power = dmc->timing_power[idx - 1];

+put_node:
+	of_node_put(np_ddr);
 	return ret;
 }

--- a/drivers/soc/bcm/brcmstb/pm/pm-arm.c
+++ b/drivers/soc/bcm/brcmstb/pm/pm-arm.c
@ -783,6 +783,7 @@ static int brcmstb_pm_probe(struct platform_device *pdev)
 	}

 	ret = brcmstb_init_sram(dn);
+	of_node_put(dn);
 	if (ret) {
 		pr_err("error setting up SRAM for PM\n");
 		return ret;
--- a/drivers/soc/imx/imx8m-blk-ctrl.c
+++ b/drivers/soc/imx/imx8m-blk-ctrl.c
@ -667,7 +667,7 @@ static const struct imx8m_blk_ctrl_domain_data imx8mp_media_blk_ctl_domain_data[
 	},
 	[IMX8MP_MEDIABLK_PD_LCDIF_2] = {
 		.name = "mediablk-lcdif-2",
-		.clk_names = (const char *[]){ "disp1", "apb", "axi", },
+		.clk_names = (const char *[]){ "disp2", "apb", "axi", },
 		.num_clks = 3,
 		.gpc_name = "lcdif2",
 		.rst_mask = BIT(11) | BIT(12) | BIT(24),
--- a/include/linux/scmi_protocol.h
+++ b/include/linux/scmi_protocol.h
@ -13,8 +13,9 @@
 #include <linux/notifier.h>
 #include <linux/types.h>

-#define SCMI_MAX_STR_SIZE	64
-#define SCMI_MAX_NUM_RATES	16
+#define SCMI_MAX_STR_SIZE		64
+#define SCMI_SHORT_NAME_MAX_SIZE	16
+#define SCMI_MAX_NUM_RATES		16

 /**
 * struct scmi_revision_info - version information structure
@ -36,8 +37,8 @@ struct scmi_revision_info {
 	u8 num_protocols;
 	u8 num_agents;
 	u32 impl_ver;
-	char vendor_id[SCMI_MAX_STR_SIZE];
-	char sub_vendor_id[SCMI_MAX_STR_SIZE];
+	char vendor_id[SCMI_SHORT_NAME_MAX_SIZE];
+	char sub_vendor_id[SCMI_SHORT_NAME_MAX_SIZE];
 };

 struct scmi_clock_info {