mmc: sdhci-pci: Fix card detect race for Intel BXT/APL

Intel BXT/APL use a card detect GPIO however the host controller
will not enable bus power unless it's card detect also reflects
the presence of a card.  Unfortunately those 2 things race which
can result in commands not starting, after which the controller
does nothing and there is a 10 second wait for the driver's
10-second timer to timeout.

That is fixed by having the driver look also at the present state
register to determine if the card is present.  Consequently, provide
a 'get_cd' mmc host operation for BXT/APL that does that.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
Adrian Hunter 2016-02-09 16:12:37 +02:00 committed by Ulf Hansson
parent 8d28b7a72f
commit 163cbe31e5

View File

@ -330,6 +330,33 @@ static void spt_read_drive_strength(struct sdhci_host *host)
sdhci_pci_spt_drive_strength = 0x10 | ((val >> 12) & 0xf);
}
static int bxt_get_cd(struct mmc_host *mmc)
{
int gpio_cd = mmc_gpio_get_cd(mmc);
struct sdhci_host *host = mmc_priv(mmc);
unsigned long flags;
int ret = 0;
if (!gpio_cd)
return 0;
pm_runtime_get_sync(mmc->parent);
spin_lock_irqsave(&host->lock, flags);
if (host->flags & SDHCI_DEVICE_DEAD)
goto out;
ret = !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT);
out:
spin_unlock_irqrestore(&host->lock, flags);
pm_runtime_mark_last_busy(mmc->parent);
pm_runtime_put_autosuspend(mmc->parent);
return ret;
}
static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
{
slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
@ -362,6 +389,10 @@ static int byt_sd_probe_slot(struct sdhci_pci_slot *slot)
slot->cd_con_id = NULL;
slot->cd_idx = 0;
slot->cd_override_level = true;
if (slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_BXT_SD ||
slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_APL_SD)
slot->host->mmc_host_ops.get_cd = bxt_get_cd;
return 0;
}