Merge branches 'x86/amd', 'x86/vt-d', 'arm/exynos', 'arm/mediatek', 'arm/renesas' and 'arm/smmu' into next

This commit is contained in:
Joerg Roedel 2016-09-20 13:27:09 +02:00
1387 changed files with 16881 additions and 8913 deletions

View File

@ -88,6 +88,7 @@ Kay Sievers <kay.sievers@vrfy.org>
Kenneth W Chen <kenneth.w.chen@intel.com>
Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>
Koushik <raghavendra.koushik@neterion.com>
Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski@samsung.com>
Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski.k@gmail.com>
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Leonid I Ananiev <leonid.i.ananiev@intel.com>
@ -158,6 +159,8 @@ Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Viresh Kumar <vireshk@kernel.org> <viresh.kumar@st.com>
Viresh Kumar <vireshk@kernel.org> <viresh.linux@gmail.com>
Viresh Kumar <vireshk@kernel.org> <viresh.kumar2@arm.com>
Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@virtuozzo.com>
Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@parallels.com>
Takashi YOSHII <takashi.yoshii.zj@renesas.com>
Yusuke Goda <goda.yusuke@renesas.com>
Gustavo Padovan <gustavo@las.ic.unicamp.br>

View File

@ -1,7 +1,7 @@
# Note: This documents additional properties of any device beyond what
# is documented in Documentation/sysfs-rules.txt
What: /sys/devices/*/of_path
What: /sys/devices/*/of_node
Date: February 2015
Contact: Device Tree mailing list <devicetree@vger.kernel.org>
Description:

View File

@ -94,14 +94,11 @@ has a requirements for a minimum number of vectors the driver can pass a
min_vecs argument set to this limit, and the PCI core will return -ENOSPC
if it can't meet the minimum number of vectors.
The flags argument should normally be set to 0, but can be used to pass the
PCI_IRQ_NOMSI and PCI_IRQ_NOMSIX flag in case a device claims to support
MSI or MSI-X, but the support is broken, or to pass PCI_IRQ_NOLEGACY in
case the device does not support legacy interrupt lines.
By default this function will spread the interrupts around the available
CPUs, but this feature can be disabled by passing the PCI_IRQ_NOAFFINITY
flag.
The flags argument is used to specify which type of interrupt can be used
by the device and the driver (PCI_IRQ_LEGACY, PCI_IRQ_MSI, PCI_IRQ_MSIX).
A convenient short-hand (PCI_IRQ_ALL_TYPES) is also available to ask for
any possible kind of interrupt. If the PCI_IRQ_AFFINITY flag is set,
pci_alloc_irq_vectors() will spread the interrupts around the available CPUs.
To get the Linux IRQ numbers passed to request_irq() and free_irq() and the
vectors, use the following function:
@ -131,7 +128,7 @@ larger than the number supported by the device it will automatically be
capped to the supported limit, so there is no need to query the number of
vectors supported beforehand:
nvec = pci_alloc_irq_vectors(pdev, 1, nvec, 0);
nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_ALL_TYPES)
if (nvec < 0)
goto out_err;
@ -140,7 +137,7 @@ interrupts it can request a particular number of interrupts by passing that
number to pci_alloc_irq_vectors() function as both 'min_vecs' and
'max_vecs' parameters:
ret = pci_alloc_irq_vectors(pdev, nvec, nvec, 0);
ret = pci_alloc_irq_vectors(pdev, nvec, nvec, PCI_IRQ_ALL_TYPES);
if (ret < 0)
goto out_err;
@ -148,15 +145,14 @@ The most notorious example of the request type described above is enabling
the single MSI mode for a device. It could be done by passing two 1s as
'min_vecs' and 'max_vecs':
ret = pci_alloc_irq_vectors(pdev, 1, 1, 0);
ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
if (ret < 0)
goto out_err;
Some devices might not support using legacy line interrupts, in which case
the PCI_IRQ_NOLEGACY flag can be used to fail the request if the platform
can't provide MSI or MSI-X interrupts:
the driver can specify that only MSI or MSI-X is acceptable:
nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_NOLEGACY);
nvec = pci_alloc_irq_vectors(pdev, 1, nvec, PCI_IRQ_MSI | PCI_IRQ_MSIX);
if (nvec < 0)
goto out_err;

View File

@ -124,7 +124,6 @@ initialization with a pointer to a structure describing the driver
The ID table is an array of struct pci_device_id entries ending with an
all-zero entry. Definitions with static const are generally preferred.
Use of the deprecated macro DEFINE_PCI_DEVICE_TABLE should be avoided.
Each entry consists of:

View File

@ -18,13 +18,17 @@ and config2 fields of the perf_event_attr structure. The "events"
directory provides configuration templates for all documented
events, that can be used with perf tool. For example "xp_valid_flit"
is an equivalent of "type=0x8,event=0x4". Other parameters must be
explicitly specified. For events originating from device, "node"
defines its index. All crosspoint events require "xp" (index),
"port" (device port number) and "vc" (virtual channel ID) and
"dir" (direction). Watchpoints (special "event" value 0xfe) also
require comparator values ("cmp_l" and "cmp_h") and "mask", being
index of the comparator mask.
explicitly specified.
For events originating from device, "node" defines its index.
Crosspoint PMU events require "xp" (index), "bus" (bus number)
and "vc" (virtual channel ID).
Crosspoint watchpoint-based events (special "event" value 0xfe)
require "xp" and "vc" as as above plus "port" (device port index),
"dir" (transmit/receive direction), comparator values ("cmp_l"
and "cmp_h") and "mask", being index of the comparator mask.
Masks are defined separately from the event description
(due to limited number of the config values) in the "cmp_mask"
directory, with first 8 configurable by user and additional

View File

@ -53,6 +53,7 @@ stable kernels.
| ARM | Cortex-A57 | #832075 | ARM64_ERRATUM_832075 |
| ARM | Cortex-A57 | #852523 | N/A |
| ARM | Cortex-A57 | #834220 | ARM64_ERRATUM_834220 |
| ARM | Cortex-A72 | #853709 | N/A |
| ARM | MMU-500 | #841119,#826419 | N/A |
| | | | |
| Cavium | ThunderX ITS | #22375, #24313 | CAVIUM_ERRATUM_22375 |

View File

@ -14,6 +14,12 @@ add_random (RW)
This file allows to turn off the disk entropy contribution. Default
value of this file is '1'(on).
dax (RO)
--------
This file indicates whether the device supports Direct Access (DAX),
used by CPU-addressable storage to bypass the pagecache. It shows '1'
if true, '0' if not.
discard_granularity (RO)
-----------------------
This shows the size of internal allocation of the device in bytes, if
@ -46,6 +52,12 @@ hw_sector_size (RO)
-------------------
This is the hardware sector size of the device, in bytes.
io_poll (RW)
------------
When read, this file shows the total number of block IO polls and how
many returned success. Writing '0' to this file will disable polling
for this device. Writing any non-zero value will enable this feature.
iostats (RW)
-------------
This file is used to control (on/off) the iostats accounting of the
@ -151,5 +163,11 @@ device state. This means that it might not be safe to toggle the
setting from "write back" to "write through", since that will also
eliminate cache flushes issued by the kernel.
write_same_max_bytes (RO)
-------------------------
This is the number of bytes the device can write in a single write-same
command. A value of '0' means write-same is not supported by this
device.
Jens Axboe <jens.axboe@oracle.com>, February 2009

View File

@ -131,7 +131,7 @@ pygments_style = 'sphinx'
todo_include_todos = False
primary_domain = 'C'
highlight_language = 'C'
highlight_language = 'guess'
# -- Options for HTML output ----------------------------------------------

View File

@ -103,7 +103,7 @@ Config Main Menu
Power management options (ACPI, APM) --->
CPU Frequency scaling --->
[*] CPU Frequency scaling
<*> CPU frequency translation statistics
[*] CPU frequency translation statistics
[*] CPU frequency translation statistics details

View File

@ -16,6 +16,11 @@ Required properties:
- vref-supply: The regulator supply ADC reference voltage.
- #io-channel-cells: Should be 1, see ../iio-bindings.txt
Optional properties:
- resets: Must contain an entry for each entry in reset-names if need support
this option. See ../reset/reset.txt for details.
- reset-names: Must include the name "saradc-apb".
Example:
saradc: saradc@2006c000 {
compatible = "rockchip,saradc";
@ -23,6 +28,8 @@ Example:
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
clock-names = "saradc", "apb_pclk";
resets = <&cru SRST_SARADC>;
reset-names = "saradc-apb";
#io-channel-cells = <1>;
vref-supply = <&vcc18>;
};

View File

@ -27,6 +27,12 @@ the PCIe specification.
* "cmdq-sync" - CMD_SYNC complete
* "gerror" - Global Error activated
- #iommu-cells : See the generic IOMMU binding described in
devicetree/bindings/pci/pci-iommu.txt
for details. For SMMUv3, must be 1, with each cell
describing a single stream ID. All possible stream
IDs which a device may emit must be described.
** SMMUv3 optional properties:
- dma-coherent : Present if DMA operations made by the SMMU (page
@ -54,6 +60,6 @@ the PCIe specification.
<GIC_SPI 79 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "eventq", "priq", "cmdq-sync", "gerror";
dma-coherent;
#iommu-cells = <0>;
#iommu-cells = <1>;
msi-parent = <&its 0xff0000>;
};

View File

@ -35,12 +35,16 @@ conditions.
interrupt per context bank. In the case of a single,
combined interrupt, it must be listed multiple times.
- mmu-masters : A list of phandles to device nodes representing bus
masters for which the SMMU can provide a translation
and their corresponding StreamIDs (see example below).
Each device node linked from this list must have a
"#stream-id-cells" property, indicating the number of
StreamIDs associated with it.
- #iommu-cells : See Documentation/devicetree/bindings/iommu/iommu.txt
for details. With a value of 1, each "iommus" entry
represents a distinct stream ID emitted by that device
into the relevant SMMU.
SMMUs with stream matching support and complex masters
may use a value of 2, where the second cell represents
an SMR mask to combine with the ID in the first cell.
Care must be taken to ensure the set of matched IDs
does not result in conflicts.
** System MMU optional properties:
@ -56,9 +60,20 @@ conditions.
aliases of secure registers have to be used during
SMMU configuration.
Example:
** Deprecated properties:
smmu {
- mmu-masters (deprecated in favour of the generic "iommus" binding) :
A list of phandles to device nodes representing bus
masters for which the SMMU can provide a translation
and their corresponding Stream IDs. Each device node
linked from this list must have a "#stream-id-cells"
property, indicating the number of Stream ID
arguments associated with its phandle.
** Examples:
/* SMMU with stream matching or stream indexing */
smmu1: iommu {
compatible = "arm,smmu-v1";
reg = <0xba5e0000 0x10000>;
#global-interrupts = <2>;
@ -68,11 +83,29 @@ Example:
<0 35 4>,
<0 36 4>,
<0 37 4>;
/*
* Two DMA controllers, the first with two StreamIDs (0xd01d
* and 0xd01e) and the second with only one (0xd11c).
*/
mmu-masters = <&dma0 0xd01d 0xd01e>,
<&dma1 0xd11c>;
#iommu-cells = <1>;
};
/* device with two stream IDs, 0 and 7 */
master1 {
iommus = <&smmu1 0>,
<&smmu1 7>;
};
/* SMMU with stream matching */
smmu2: iommu {
...
#iommu-cells = <2>;
};
/* device with stream IDs 0 and 7 */
master2 {
iommus = <&smmu2 0 0>,
<&smmu2 7 0>;
};
/* device with stream IDs 1, 17, 33 and 49 */
master3 {
iommus = <&smmu2 1 0x30>;
};

View File

@ -10,7 +10,7 @@ Required properties:
subsystem (mmcss) inside the FlashSS (available in STiH407 SoC
family).
- clock-names: Should be "mmc".
- clock-names: Should be "mmc" and "icn". (NB: The latter is not compulsory)
See: Documentation/devicetree/bindings/resource-names.txt
- clocks: Phandle to the clock.
See: Documentation/devicetree/bindings/clock/clock-bindings.txt

View File

@ -0,0 +1,171 @@
This document describes the generic device tree binding for describing the
relationship between PCI(e) devices and IOMMU(s).
Each PCI(e) device under a root complex is uniquely identified by its Requester
ID (AKA RID). A Requester ID is a triplet of a Bus number, Device number, and
Function number.
For the purpose of this document, when treated as a numeric value, a RID is
formatted such that:
* Bits [15:8] are the Bus number.
* Bits [7:3] are the Device number.
* Bits [2:0] are the Function number.
* Any other bits required for padding must be zero.
IOMMUs may distinguish PCI devices through sideband data derived from the
Requester ID. While a given PCI device can only master through one IOMMU, a
root complex may split masters across a set of IOMMUs (e.g. with one IOMMU per
bus).
The generic 'iommus' property is insufficient to describe this relationship,
and a mechanism is required to map from a PCI device to its IOMMU and sideband
data.
For generic IOMMU bindings, see
Documentation/devicetree/bindings/iommu/iommu.txt.
PCI root complex
================
Optional properties
-------------------
- iommu-map: Maps a Requester ID to an IOMMU and associated iommu-specifier
data.
The property is an arbitrary number of tuples of
(rid-base,iommu,iommu-base,length).
Any RID r in the interval [rid-base, rid-base + length) is associated with
the listed IOMMU, with the iommu-specifier (r - rid-base + iommu-base).
- iommu-map-mask: A mask to be applied to each Requester ID prior to being
mapped to an iommu-specifier per the iommu-map property.
Example (1)
===========
/ {
#address-cells = <1>;
#size-cells = <1>;
iommu: iommu@a {
reg = <0xa 0x1>;
compatible = "vendor,some-iommu";
#iommu-cells = <1>;
};
pci: pci@f {
reg = <0xf 0x1>;
compatible = "vendor,pcie-root-complex";
device_type = "pci";
/*
* The sideband data provided to the IOMMU is the RID,
* identity-mapped.
*/
iommu-map = <0x0 &iommu 0x0 0x10000>;
};
};
Example (2)
===========
/ {
#address-cells = <1>;
#size-cells = <1>;
iommu: iommu@a {
reg = <0xa 0x1>;
compatible = "vendor,some-iommu";
#iommu-cells = <1>;
};
pci: pci@f {
reg = <0xf 0x1>;
compatible = "vendor,pcie-root-complex";
device_type = "pci";
/*
* The sideband data provided to the IOMMU is the RID with the
* function bits masked out.
*/
iommu-map = <0x0 &iommu 0x0 0x10000>;
iommu-map-mask = <0xfff8>;
};
};
Example (3)
===========
/ {
#address-cells = <1>;
#size-cells = <1>;
iommu: iommu@a {
reg = <0xa 0x1>;
compatible = "vendor,some-iommu";
#iommu-cells = <1>;
};
pci: pci@f {
reg = <0xf 0x1>;
compatible = "vendor,pcie-root-complex";
device_type = "pci";
/*
* The sideband data provided to the IOMMU is the RID,
* but the high bits of the bus number are flipped.
*/
iommu-map = <0x0000 &iommu 0x8000 0x8000>,
<0x8000 &iommu 0x0000 0x8000>;
};
};
Example (4)
===========
/ {
#address-cells = <1>;
#size-cells = <1>;
iommu_a: iommu@a {
reg = <0xa 0x1>;
compatible = "vendor,some-iommu";
#iommu-cells = <1>;
};
iommu_b: iommu@b {
reg = <0xb 0x1>;
compatible = "vendor,some-iommu";
#iommu-cells = <1>;
};
iommu_c: iommu@c {
reg = <0xc 0x1>;
compatible = "vendor,some-iommu";
#iommu-cells = <1>;
};
pci: pci@f {
reg = <0xf 0x1>;
compatible = "vendor,pcie-root-complex";
device_type = "pci";
/*
* Devices with bus number 0-127 are mastered via IOMMU
* a, with sideband data being RID[14:0].
* Devices with bus number 128-255 are mastered via
* IOMMU b, with sideband data being RID[14:0].
* No devices master via IOMMU c.
*/
iommu-map = <0x0000 &iommu_a 0x0000 0x8000>,
<0x8000 &iommu_b 0x0000 0x8000>;
};
};

View File

@ -42,9 +42,6 @@ Optional properties:
- auto-flow-control: one way to enable automatic flow control support. The
driver is allowed to detect support for the capability even without this
property.
- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
line respectively. It will use specified GPIO instead of the peripheral
function pin for the UART feature. If unsure, don't specify this property.
Note:
* fsl,ns16550:
@ -66,19 +63,3 @@ Example:
interrupts = <10>;
reg-shift = <2>;
};
Example for OMAP UART using GPIO-based modem control signals:
uart4: serial@49042000 {
compatible = "ti,omap3-uart";
reg = <0x49042000 0x400>;
interrupts = <80>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
};

View File

@ -8,8 +8,6 @@ Required properties:
- interrupts: Interrupt number for McPDM
- interrupt-parent: The parent interrupt controller
- ti,hwmods: Name of the hwmod associated to the McPDM
- clocks: phandle for the pdmclk provider, likely <&twl6040>
- clock-names: Must be "pdmclk"
Example:
@ -21,11 +19,3 @@ mcpdm: mcpdm@40132000 {
interrupt-parent = <&gic>;
ti,hwmods = "mcpdm";
};
In board DTS file the pdmclk needs to be added:
&mcpdm {
clocks = <&twl6040>;
clock-names = "pdmclk";
status = "okay";
};

View File

@ -62,7 +62,7 @@ For more examples of cooling devices, refer to the example sections below.
Required properties:
- #cooling-cells: Used to provide cooling device specific information
Type: unsigned while referring to it. Must be at least 2, in order
Size: one cell to specify minimum and maximum cooling state used
Size: one cell to specify minimum and maximum cooling state used
in the reference. The first cell is the minimum
cooling state requested and the second cell is
the maximum cooling state requested in the reference.
@ -119,7 +119,7 @@ Required properties:
Optional property:
- contribution: The cooling contribution to the thermal zone of the
Type: unsigned referred cooling device at the referred trip point.
Size: one cell The contribution is a ratio of the sum
Size: one cell The contribution is a ratio of the sum
of all cooling contributions within a thermal zone.
Note: Using the THERMAL_NO_LIMIT (-1UL) constant in the cooling-device phandle
@ -145,7 +145,7 @@ Required properties:
Size: one cell
- thermal-sensors: A list of thermal sensor phandles and sensor specifier
Type: list of used while monitoring the thermal zone.
Type: list of used while monitoring the thermal zone.
phandles + sensor
specifier
@ -473,7 +473,7 @@ thermal-zones {
<&adc>; /* pcb north */
/* hotspot = 100 * bandgap - 120 * adc + 484 */
coefficients = <100 -120 484>;
coefficients = <100 -120 484>;
trips {
...
@ -502,7 +502,7 @@ from the ADC sensor. The binding would be then:
thermal-sensors = <&adc>;
/* hotspot = 1 * adc + 6000 */
coefficients = <1 6000>;
coefficients = <1 6000>;
(d) - Board thermal

View File

@ -183,12 +183,10 @@ The copy_up operation essentially creates a new, identical file and
moves it over to the old name. The new file may be on a different
filesystem, so both st_dev and st_ino of the file may change.
Any open files referring to this inode will access the old data and
metadata. Similarly any file locks obtained before copy_up will not
apply to the copied up file.
Any open files referring to this inode will access the old data.
On a file opened with O_RDONLY fchmod(2), fchown(2), futimesat(2) and
fsetxattr(2) will fail with EROFS.
Any file locks (and leases) obtained before copy_up will not apply
to the copied up file.
If a file with multiple hard links is copied up, then this will
"break" the link. Changes will not be propagated to other names

View File

@ -19,5 +19,5 @@ enhancements. It can monitor up to 4 voltages, 16 temperatures and
implemented in this driver.
Specification of the chip can be found here:
ftp:///pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/BMC-Teutates_Specification_V1.21.pdf
ftp:///pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/Fujitsu_mainboards-1-Sensors_HowTo-en-US.pdf
ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/BMC-Teutates_Specification_V1.21.pdf
ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Services/Software&Tools/Linux_SystemMonitoring&Watchdog&GPIO/Fujitsu_mainboards-1-Sensors_HowTo-en-US.pdf

View File

@ -145,6 +145,11 @@ If you want to add slave support to the bus driver:
* Catch the slave interrupts and send appropriate i2c_slave_events to the backend.
Note that most hardware supports being master _and_ slave on the same bus. So,
if you extend a bus driver, please make sure that the driver supports that as
well. In almost all cases, slave support does not need to disable the master
functionality.
Check the i2c-rcar driver as an example.

View File

@ -366,8 +366,6 @@ Domain`_ references.
Cross-referencing from reStructuredText
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.. highlight:: none
To cross-reference the functions and types defined in the kernel-doc comments
from reStructuredText documents, please use the `Sphinx C Domain`_
references. For example::
@ -390,8 +388,6 @@ For further details, please refer to the `Sphinx C Domain`_ documentation.
Function documentation
----------------------
.. highlight:: c
The general format of a function and function-like macro kernel-doc comment is::
/**
@ -572,8 +568,6 @@ DocBook XML [DEPRECATED]
Converting DocBook to Sphinx
----------------------------
.. highlight:: none
Over time, we expect all of the documents under ``Documentation/DocBook`` to be
converted to Sphinx and reStructuredText. For most DocBook XML documents, a good
enough solution is to use the simple ``Documentation/sphinx/tmplcvt`` script,

View File

@ -3041,6 +3041,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
PAGE_SIZE is used as alignment.
PCI-PCI bridge can be specified, if resource
windows need to be expanded.
To specify the alignment for several
instances of a device, the PCI vendor,
device, subvendor, and subdevice may be
specified, e.g., 4096@pci:8086:9c22:103c:198f
ecrc= Enable/disable PCIe ECRC (transaction layer
end-to-end CRC checking).
bios: Use BIOS/firmware settings. This is the

View File

@ -587,26 +587,6 @@ of DSA, would be the its port-based VLAN, used by the associated bridge device.
TODO
====
The platform device problem
---------------------------
DSA is currently implemented as a platform device driver which is far from ideal
as was discussed in this thread:
http://permalink.gmane.org/gmane.linux.network/329848
This basically prevents the device driver model to be properly used and applied,
and support non-MDIO, non-MMIO Ethernet connected switches.
Another problem with the platform device driver approach is that it prevents the
use of a modular switch drivers build due to a circular dependency, illustrated
here:
http://comments.gmane.org/gmane.linux.network/345803
Attempts of reworking this has been done here:
https://lwn.net/Articles/643149/
Making SWITCHDEV and DSA converge towards an unified codebase
-------------------------------------------------------------

View File

@ -790,13 +790,12 @@ The kernel interface functions are as follows:
Data messages can have their contents extracted with the usual bunch of
socket buffer manipulation functions. A data message can be determined to
be the last one in a sequence with rxrpc_kernel_is_data_last(). When a
data message has been used up, rxrpc_kernel_data_delivered() should be
called on it..
data message has been used up, rxrpc_kernel_data_consumed() should be
called on it.
Non-data messages should be handled to rxrpc_kernel_free_skb() to dispose
of. It is possible to get extra refs on all types of message for later
freeing, but this may pin the state of a call until the message is finally
freed.
Messages should be handled to rxrpc_kernel_free_skb() to dispose of. It
is possible to get extra refs on all types of message for later freeing,
but this may pin the state of a call until the message is finally freed.
(*) Accept an incoming call.
@ -821,12 +820,14 @@ The kernel interface functions are as follows:
Other errors may be returned if the call had been aborted (-ECONNABORTED)
or had timed out (-ETIME).
(*) Record the delivery of a data message and free it.
(*) Record the delivery of a data message.
void rxrpc_kernel_data_delivered(struct sk_buff *skb);
void rxrpc_kernel_data_consumed(struct rxrpc_call *call,
struct sk_buff *skb);
This is used to record a data message as having been delivered and to
update the ACK state for the call. The socket buffer will be freed.
This is used to record a data message as having been consumed and to
update the ACK state for the call. The message must still be passed to
rxrpc_kernel_free_skb() for disposal by the caller.
(*) Free a message.

View File

@ -164,7 +164,32 @@ load n/2 modules more and try again.
Again, if you find the offending module(s), it(they) must be unloaded every time
before hibernation, and please report the problem with it(them).
c) Advanced debugging
c) Using the "test_resume" hibernation option
/sys/power/disk generally tells the kernel what to do after creating a
hibernation image. One of the available options is "test_resume" which
causes the just created image to be used for immediate restoration. Namely,
after doing:
# echo test_resume > /sys/power/disk
# echo disk > /sys/power/state
a hibernation image will be created and a resume from it will be triggered
immediately without involving the platform firmware in any way.
That test can be used to check if failures to resume from hibernation are
related to bad interactions with the platform firmware. That is, if the above
works every time, but resume from actual hibernation does not work or is
unreliable, the platform firmware may be responsible for the failures.
On architectures and platforms that support using different kernels to restore
hibernation images (that is, the kernel used to read the image from storage and
load it into memory is different from the one included in the image) or support
kernel address space randomization, it also can be used to check if failures
to resume may be related to the differences between the restore and image
kernels.
d) Advanced debugging
In case that hibernation does not work on your system even in the minimal
configuration and compiling more drivers as modules is not practical or some

View File

@ -1,75 +1,76 @@
Power Management Interface
Power Management Interface for System Sleep
Copyright (c) 2016 Intel Corp., Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The power management subsystem provides a unified sysfs interface to
userspace, regardless of what architecture or platform one is
running. The interface exists in /sys/power/ directory (assuming sysfs
is mounted at /sys).
The power management subsystem provides userspace with a unified sysfs interface
for system sleep regardless of the underlying system architecture or platform.
The interface is located in the /sys/power/ directory (assuming that sysfs is
mounted at /sys).
/sys/power/state controls system power state. Reading from this file
returns what states are supported, which is hard-coded to 'freeze',
'standby' (Power-On Suspend), 'mem' (Suspend-to-RAM), and 'disk'
(Suspend-to-Disk).
/sys/power/state is the system sleep state control file.
Writing to this file one of those strings causes the system to
transition into that state. Please see the file
Documentation/power/states.txt for a description of each of those
states.
Reading from it returns a list of supported sleep states, encoded as:
'freeze' (Suspend-to-Idle)
'standby' (Power-On Suspend)
'mem' (Suspend-to-RAM)
'disk' (Suspend-to-Disk)
/sys/power/disk controls the operating mode of the suspend-to-disk
mechanism. Suspend-to-disk can be handled in several ways. We have a
few options for putting the system to sleep - using the platform driver
(e.g. ACPI or other suspend_ops), powering off the system or rebooting the
system (for testing).
Suspend-to-Idle is always supported. Suspend-to-Disk is always supported
too as long the kernel has been configured to support hibernation at all
(ie. CONFIG_HIBERNATION is set in the kernel configuration file). Support
for Suspend-to-RAM and Power-On Suspend depends on the capabilities of the
platform.
Additionally, /sys/power/disk can be used to turn on one of the two testing
modes of the suspend-to-disk mechanism: 'testproc' or 'test'. If the
suspend-to-disk mechanism is in the 'testproc' mode, writing 'disk' to
/sys/power/state will cause the kernel to disable nonboot CPUs and freeze
tasks, wait for 5 seconds, unfreeze tasks and enable nonboot CPUs. If it is
in the 'test' mode, writing 'disk' to /sys/power/state will cause the kernel
to disable nonboot CPUs and freeze tasks, shrink memory, suspend devices, wait
for 5 seconds, resume devices, unfreeze tasks and enable nonboot CPUs. Then,
we are able to look in the log messages and work out, for example, which code
is being slow and which device drivers are misbehaving.
If one of the strings listed in /sys/power/state is written to it, the system
will attempt to transition into the corresponding sleep state. Refer to
Documentation/power/states.txt for a description of each of those states.
Reading from this file will display all supported modes and the currently
selected one in brackets, for example
/sys/power/disk controls the operating mode of hibernation (Suspend-to-Disk).
Specifically, it tells the kernel what to do after creating a hibernation image.
[shutdown] reboot test testproc
Reading from it returns a list of supported options encoded as:
Writing to this file will accept one of
'platform' (put the system into sleep using a platform-provided method)
'shutdown' (shut the system down)
'reboot' (reboot the system)
'suspend' (trigger a Suspend-to-RAM transition)
'test_resume' (resume-after-hibernation test mode)
'platform' (only if the platform supports it)
'shutdown'
'reboot'
'testproc'
'test'
The currently selected option is printed in square brackets.
/sys/power/image_size controls the size of the image created by
the suspend-to-disk mechanism. It can be written a string
representing a non-negative integer that will be used as an upper
limit of the image size, in bytes. The suspend-to-disk mechanism will
do its best to ensure the image size will not exceed that number. However,
if this turns out to be impossible, it will try to suspend anyway using the
smallest image possible. In particular, if "0" is written to this file, the
suspend image will be as small as possible.
The 'platform' option is only available if the platform provides a special
mechanism to put the system to sleep after creating a hibernation image (ACPI
does that, for example). The 'suspend' option is available if Suspend-to-RAM
is supported. Refer to Documentation/power/basic_pm_debugging.txt for the
description of the 'test_resume' option.
Reading from this file will display the current image size limit, which
is set to 2/5 of available RAM by default.
To select an option, write the string representing it to /sys/power/disk.
/sys/power/pm_trace controls the code which saves the last PM event point in
the RTC across reboots, so that you can debug a machine that just hangs
during suspend (or more commonly, during resume). Namely, the RTC is only
used to save the last PM event point if this file contains '1'. Initially it
contains '0' which may be changed to '1' by writing a string representing a
nonzero integer into it.
/sys/power/image_size controls the size of hibernation images.
To use this debugging feature you should attempt to suspend the machine, then
reboot it and run
It can be written a string representing a non-negative integer that will be
used as a best-effort upper limit of the image size, in bytes. The hibernation
core will do its best to ensure that the image size will not exceed that number.
However, if that turns out to be impossible to achieve, a hibernation image will
still be created and its size will be as small as possible. In particular,
writing '0' to this file will enforce hibernation images to be as small as
possible.
dmesg -s 1000000 | grep 'hash matches'
Reading from this file returns the current image size limit, which is set to
around 2/5 of available RAM by default.
CAUTION: Using it will cause your machine's real-time (CMOS) clock to be
set to a random invalid time after a resume.
/sys/power/pm_trace controls the PM trace mechanism saving the last suspend
or resume event point in the RTC across reboots.
It helps to debug hard lockups or reboots due to device driver failures that
occur during system suspend or resume (which is more common) more effectively.
If /sys/power/pm_trace contains '1', the fingerprint of each suspend/resume
event point in turn will be stored in the RTC memory (overwriting the actual
RTC information), so it will survive a system crash if one occurs right after
storing it and it can be used later to identify the driver that caused the crash
to happen (see Documentation/power/s2ram.txt for more information).
Initially it contains '0' which may be changed to '1' by writing a string
representing a nonzero integer into it.

View File

@ -167,6 +167,8 @@ signal will be rolled back anyway.
For signals taken in non-TM or suspended mode, we use the
normal/non-checkpointed stack pointer.
Any transaction initiated inside a sighandler and suspended on return
from the sighandler to the kernel will get reclaimed and discarded.
Failure cause codes used by kernel
==================================

View File

@ -80,6 +80,10 @@ functionality of their platform when planning to use this driver:
III. Module parameters
- 'dma_timeout' - DMA transfer completion timeout (in msec, default value 3000).
This parameter set a maximum completion wait time for SYNC mode DMA
transfer requests and for RIO_WAIT_FOR_ASYNC ioctl requests.
- 'dbg_level' - This parameter allows to control amount of debug information
generated by this device driver. This parameter is formed by set of
bit masks that correspond to the specific functional blocks.

View File

@ -42,11 +42,12 @@
caption a.headerlink { opacity: 0; }
caption a.headerlink:hover { opacity: 1; }
/* inline literal: drop the borderbox and red color */
/* inline literal: drop the borderbox, padding and red color */
code, .rst-content tt, .rst-content code {
color: inherit;
border: none;
padding: unset;
background: inherit;
font-size: 85%;
}

View File

@ -798,6 +798,7 @@ M: Laura Abbott <labbott@redhat.com>
M: Sumit Semwal <sumit.semwal@linaro.org>
L: devel@driverdev.osuosl.org
S: Supported
F: Documentation/devicetree/bindings/staging/ion/
F: drivers/staging/android/ion
F: drivers/staging/android/uapi/ion.h
F: drivers/staging/android/uapi/ion_test.h
@ -881,6 +882,15 @@ S: Supported
F: drivers/gpu/drm/arc/
F: Documentation/devicetree/bindings/display/snps,arcpgu.txt
ARM ARCHITECTED TIMER DRIVER
M: Mark Rutland <mark.rutland@arm.com>
M: Marc Zyngier <marc.zyngier@arm.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/include/asm/arch_timer.h
F: arch/arm64/include/asm/arch_timer.h
F: drivers/clocksource/arm_arch_timer.c
ARM HDLCD DRM DRIVER
M: Liviu Dudau <liviu.dudau@arm.com>
S: Supported
@ -1004,6 +1014,7 @@ N: meson
ARM/Annapurna Labs ALPINE ARCHITECTURE
M: Tsahee Zidenberg <tsahee@annapurnalabs.com>
M: Antoine Tenart <antoine.tenart@free-electrons.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-alpine/
F: arch/arm/boot/dts/alpine*
@ -1613,7 +1624,8 @@ N: rockchip
ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
M: Kukjin Kim <kgene@kernel.org>
M: Krzysztof Kozlowski <k.kozlowski@samsung.com>
M: Krzysztof Kozlowski <krzk@kernel.org>
R: Javier Martinez Canillas <javier@osg.samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
S: Maintained
@ -1633,7 +1645,6 @@ F: drivers/*/*s3c64xx*
F: drivers/*/*s5pv210*
F: drivers/memory/samsung/*
F: drivers/soc/samsung/*
F: drivers/spi/spi-s3c*
F: Documentation/arm/Samsung/
F: Documentation/devicetree/bindings/arm/samsung/
F: Documentation/devicetree/bindings/sram/samsung-sram.txt
@ -1821,6 +1832,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
ARM/UNIPHIER ARCHITECTURE
M: Masahiro Yamada <yamada.masahiro@socionext.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier.git
S: Maintained
F: arch/arm/boot/dts/uniphier*
F: arch/arm/include/asm/hardware/cache-uniphier.h
@ -2474,7 +2486,7 @@ F: include/net/bluetooth/
BONDING DRIVER
M: Jay Vosburgh <j.vosburgh@gmail.com>
M: Veaceslav Falico <vfalico@gmail.com>
M: Andy Gospodarek <gospo@cumulusnetworks.com>
M: Andy Gospodarek <andy@greyhouse.net>
L: netdev@vger.kernel.org
W: http://sourceforge.net/projects/bonding/
S: Supported
@ -3237,7 +3249,7 @@ F: kernel/cpuset.c
CONTROL GROUP - MEMORY RESOURCE CONTROLLER (MEMCG)
M: Johannes Weiner <hannes@cmpxchg.org>
M: Michal Hocko <mhocko@kernel.org>
M: Vladimir Davydov <vdavydov@virtuozzo.com>
M: Vladimir Davydov <vdavydov.dev@gmail.com>
L: cgroups@vger.kernel.org
L: linux-mm@kvack.org
S: Maintained
@ -3258,7 +3270,7 @@ S: Maintained
F: drivers/net/wan/cosa*
CPMAC ETHERNET DRIVER
M: Florian Fainelli <florian@openwrt.org>
M: Florian Fainelli <f.fainelli@gmail.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/ti/cpmac.c
@ -4524,6 +4536,12 @@ L: linux-edac@vger.kernel.org
S: Maintained
F: drivers/edac/sb_edac.c
EDAC-SKYLAKE
M: Tony Luck <tony.luck@intel.com>
L: linux-edac@vger.kernel.org
S: Maintained
F: drivers/edac/skx_edac.c
EDAC-XGENE
APPLIED MICRO (APM) X-GENE SOC EDAC
M: Loc Ho <lho@apm.com>
@ -7448,7 +7466,8 @@ F: Documentation/devicetree/bindings/sound/max9860.txt
F: sound/soc/codecs/max9860.*
MAXIM MUIC CHARGER DRIVERS FOR EXYNOS BASED BOARDS
M: Krzysztof Kozlowski <k.kozlowski@samsung.com>
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-pm@vger.kernel.org
S: Supported
F: drivers/power/max14577_charger.c
@ -7464,7 +7483,8 @@ F: include/dt-bindings/*/*max77802.h
MAXIM PMIC AND MUIC DRIVERS FOR EXYNOS BASED BOARDS
M: Chanwoo Choi <cw00.choi@samsung.com>
M: Krzysztof Kozlowski <k.kozlowski@samsung.com>
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-kernel@vger.kernel.org
S: Supported
F: drivers/*/max14577*.c
@ -7654,7 +7674,7 @@ L: linux-rdma@vger.kernel.org
S: Supported
W: https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home
Q: http://patchwork.kernel.org/project/linux-rdma/list/
F: drivers/infiniband/hw/rxe/
F: drivers/infiniband/sw/rxe/
F: include/uapi/rdma/rdma_user_rxe.h
MEMBARRIER SUPPORT
@ -9230,7 +9250,7 @@ F: drivers/pinctrl/sh-pfc/
PIN CONTROLLER - SAMSUNG
M: Tomasz Figa <tomasz.figa@gmail.com>
M: Krzysztof Kozlowski <k.kozlowski@samsung.com>
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
@ -10163,7 +10183,7 @@ S: Maintained
F: drivers/platform/x86/samsung-laptop.c
SAMSUNG AUDIO (ASoC) DRIVERS
M: Krzysztof Kozlowski <k.kozlowski@samsung.com>
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Sangbeom Kim <sbkim73@samsung.com>
M: Sylwester Nawrocki <s.nawrocki@samsung.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
@ -10178,7 +10198,8 @@ F: drivers/video/fbdev/s3c-fb.c
SAMSUNG MULTIFUNCTION PMIC DEVICE DRIVERS
M: Sangbeom Kim <sbkim73@samsung.com>
M: Krzysztof Kozlowski <k.kozlowski@samsung.com>
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
L: linux-kernel@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org
S: Supported
@ -10237,6 +10258,17 @@ S: Supported
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
F: drivers/clk/samsung/
SAMSUNG SPI DRIVERS
M: Kukjin Kim <kgene@kernel.org>
M: Krzysztof Kozlowski <krzk@kernel.org>
M: Andi Shyti <andi.shyti@samsung.com>
L: linux-spi@vger.kernel.org
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/spi/spi-samsung.txt
F: drivers/spi/spi-s3c*
F: include/linux/platform_data/spi-s3c64xx.h
SAMSUNG SXGBE DRIVERS
M: Byungho An <bh74.an@samsung.com>
M: Girish K S <ks.giri@samsung.com>
@ -11216,12 +11248,8 @@ S: Odd Fixes
F: drivers/staging/vt665?/
STAGING - WILC1000 WIFI DRIVER
M: Johnny Kim <johnny.kim@atmel.com>
M: Austin Shin <austin.shin@atmel.com>
M: Chris Park <chris.park@atmel.com>
M: Tony Cho <tony.cho@atmel.com>
M: Glen Lee <glen.lee@atmel.com>
M: Leo Kim <leo.kim@atmel.com>
M: Aditya Shankar <aditya.shankar@microchip.com>
M: Ganesh Krishna <ganesh.krishna@microchip.com>
L: linux-wireless@vger.kernel.org
S: Supported
F: drivers/staging/wilc1000/

View File

@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 8
SUBLEVEL = 0
EXTRAVERSION = -rc1
EXTRAVERSION = -rc7
NAME = Psychotic Stoned Sheep
# *DOCUMENTATION*
@ -635,13 +635,6 @@ endif
# Tell gcc to never replace conditional load with a non-conditional one
KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0)
PHONY += gcc-plugins
gcc-plugins: scripts_basic
ifdef CONFIG_GCC_PLUGINS
$(Q)$(MAKE) $(build)=scripts/gcc-plugins
endif
@:
include scripts/Makefile.gcc-plugins
ifdef CONFIG_READABLE_ASM

View File

@ -336,17 +336,6 @@ config HAVE_ARCH_SECCOMP_FILTER
results in the system call being skipped immediately.
- seccomp syscall wired up
For best performance, an arch should use seccomp_phase1 and
seccomp_phase2 directly. It should call seccomp_phase1 for all
syscalls if TIF_SECCOMP is set, but seccomp_phase1 does not
need to be called from a ptrace-safe context. It must then
call seccomp_phase2 if seccomp_phase1 returns anything other
than SECCOMP_PHASE1_OK or SECCOMP_PHASE1_SKIP.
As an additional optimization, an arch may provide seccomp_data
directly to seccomp_phase1; this avoids multiple calls
to the syscall_xyz helpers for every syscall.
config SECCOMP_FILTER
def_bool y
depends on HAVE_ARCH_SECCOMP_FILTER && SECCOMP && NET
@ -461,6 +450,15 @@ config CC_STACKPROTECTOR_STRONG
endchoice
config HAVE_ARCH_WITHIN_STACK_FRAMES
bool
help
An architecture should select this if it can walk the kernel stack
frames to determine if an object is part of either the arguments
or local variables (i.e. that it excludes saved return addresses,
and similar) by implementing an inline arch_within_stack_frames(),
which is used by CONFIG_HARDENED_USERCOPY.
config HAVE_CONTEXT_TRACKING
bool
help

View File

@ -371,14 +371,6 @@ __copy_tofrom_user_nocheck(void *to, const void *from, long len)
return __cu_len;
}
extern inline long
__copy_tofrom_user(void *to, const void *from, long len, const void __user *validate)
{
if (__access_ok((unsigned long)validate, len, get_fs()))
len = __copy_tofrom_user_nocheck(to, from, len);
return len;
}
#define __copy_to_user(to, from, n) \
({ \
__chk_user_ptr(to); \
@ -393,17 +385,22 @@ __copy_tofrom_user(void *to, const void *from, long len, const void __user *vali
#define __copy_to_user_inatomic __copy_to_user
#define __copy_from_user_inatomic __copy_from_user
extern inline long
copy_to_user(void __user *to, const void *from, long n)
{
return __copy_tofrom_user((__force void *)to, from, n, to);
if (likely(__access_ok((unsigned long)to, n, get_fs())))
n = __copy_tofrom_user_nocheck((__force void *)to, from, n);
return n;
}
extern inline long
copy_from_user(void *to, const void __user *from, long n)
{
return __copy_tofrom_user(to, (__force void *)from, n, from);
if (likely(__access_ok((unsigned long)from, n, get_fs())))
n = __copy_tofrom_user_nocheck(to, (__force void *)from, n);
else
memset(to, 0, n);
return n;
}
extern void __do_clear_user(void);

View File

@ -142,7 +142,7 @@
#ifdef CONFIG_ARC_CURR_IN_REG
; Retrieve orig r25 and save it with rest of callee_regs
ld.as r12, [r12, PT_user_r25]
ld r12, [r12, PT_user_r25]
PUSH r12
#else
PUSH r25
@ -198,7 +198,7 @@
; SP is back to start of pt_regs
#ifdef CONFIG_ARC_CURR_IN_REG
st.as r12, [sp, PT_user_r25]
st r12, [sp, PT_user_r25]
#endif
.endm

View File

@ -188,10 +188,10 @@ static inline int arch_irqs_disabled(void)
.endm
.macro IRQ_ENABLE scratch
TRACE_ASM_IRQ_ENABLE
lr \scratch, [status32]
or \scratch, \scratch, (STATUS_E1_MASK | STATUS_E2_MASK)
flag \scratch
TRACE_ASM_IRQ_ENABLE
.endm
#endif /* __ASSEMBLY__ */

View File

@ -280,7 +280,7 @@ static inline void pmd_set(pmd_t *pmdp, pte_t *ptep)
#define pte_page(pte) pfn_to_page(pte_pfn(pte))
#define mk_pte(page, prot) pfn_pte(page_to_pfn(page), prot)
#define pfn_pte(pfn, prot) (__pte(((pte_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot)))
#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
/* Don't use virt_to_pfn for macros below: could cause truncations for PAE40*/
#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT)

View File

@ -83,7 +83,10 @@
"2: ;nop\n" \
" .section .fixup, \"ax\"\n" \
" .align 4\n" \
"3: mov %0, %3\n" \
"3: # return -EFAULT\n" \
" mov %0, %3\n" \
" # zero out dst ptr\n" \
" mov %1, 0\n" \
" j 2b\n" \
" .previous\n" \
" .section __ex_table, \"a\"\n" \
@ -101,7 +104,11 @@
"2: ;nop\n" \
" .section .fixup, \"ax\"\n" \
" .align 4\n" \
"3: mov %0, %3\n" \
"3: # return -EFAULT\n" \
" mov %0, %3\n" \
" # zero out dst ptr\n" \
" mov %1, 0\n" \
" mov %R1, 0\n" \
" j 2b\n" \
" .previous\n" \
" .section __ex_table, \"a\"\n" \

View File

@ -13,8 +13,15 @@
/* Machine specific ELF Hdr flags */
#define EF_ARC_OSABI_MSK 0x00000f00
#define EF_ARC_OSABI_ORIG 0x00000000 /* MUST be zero for back-compat */
#define EF_ARC_OSABI_CURRENT 0x00000300 /* v3 (no legacy syscalls) */
#define EF_ARC_OSABI_V3 0x00000300 /* v3 (no legacy syscalls) */
#define EF_ARC_OSABI_V4 0x00000400 /* v4 (64bit data any reg align) */
#if __GNUC__ < 6
#define EF_ARC_OSABI_CURRENT EF_ARC_OSABI_V3
#else
#define EF_ARC_OSABI_CURRENT EF_ARC_OSABI_V4
#endif
typedef unsigned long elf_greg_t;
typedef unsigned long elf_fpregset_t;

View File

@ -28,6 +28,7 @@ extern void __muldf3(void);
extern void __divdf3(void);
extern void __floatunsidf(void);
extern void __floatunsisf(void);
extern void __udivdi3(void);
EXPORT_SYMBOL(__ashldi3);
EXPORT_SYMBOL(__ashrdi3);
@ -45,6 +46,7 @@ EXPORT_SYMBOL(__muldf3);
EXPORT_SYMBOL(__divdf3);
EXPORT_SYMBOL(__floatunsidf);
EXPORT_SYMBOL(__floatunsisf);
EXPORT_SYMBOL(__udivdi3);
/* ARC optimised assembler routines */
EXPORT_SYMBOL(memset);

View File

@ -199,7 +199,7 @@ int elf_check_arch(const struct elf32_hdr *x)
}
eflags = x->e_flags;
if ((eflags & EF_ARC_OSABI_MSK) < EF_ARC_OSABI_CURRENT) {
if ((eflags & EF_ARC_OSABI_MSK) != EF_ARC_OSABI_CURRENT) {
pr_err("ABI mismatch - you need newer toolchain\n");
force_sigsegv(SIGSEGV, current);
return 0;

View File

@ -291,8 +291,10 @@ static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
cpu->dccm.base_addr, TO_KB(cpu->dccm.sz),
cpu->iccm.base_addr, TO_KB(cpu->iccm.sz));
n += scnprintf(buf + n, len - n,
"OS ABI [v3]\t: no-legacy-syscalls\n");
n += scnprintf(buf + n, len - n, "OS ABI [v%d]\t: %s\n",
EF_ARC_OSABI_CURRENT >> 8,
EF_ARC_OSABI_CURRENT == EF_ARC_OSABI_V3 ?
"no-legacy-syscalls" : "64-bit data any register aligned");
return buf;
}

View File

@ -921,6 +921,15 @@ void arc_cache_init(void)
printk(arc_cache_mumbojumbo(0, str, sizeof(str)));
/*
* Only master CPU needs to execute rest of function:
* - Assume SMP so all cores will have same cache config so
* any geomtry checks will be same for all
* - IOC setup / dma callbacks only need to be setup once
*/
if (cpu)
return;
if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) {
struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache;

View File

@ -61,6 +61,7 @@ void *kmap(struct page *page)
return kmap_high(page);
}
EXPORT_SYMBOL(kmap);
void *kmap_atomic(struct page *page)
{

View File

@ -35,6 +35,7 @@ config ARM
select HARDIRQS_SW_RESEND
select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
select HAVE_ARCH_HARDENED_USERCOPY
select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
select HAVE_ARCH_MMAP_RND_BITS if MMU

View File

@ -260,12 +260,14 @@ machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))
ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y)
ifneq ($(CONFIG_ARM_SINGLE_ARMV7M),y)
ifeq ($(KBUILD_SRC),)
KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs))
else
KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
endif
endif
endif
export TEXT_OFFSET GZFLAGS MMUEXT

View File

@ -226,7 +226,7 @@
#address-cells = <1>;
#size-cells = <1>;
elm_id = <&elm>;
ti,elm-id = <&elm>;
};
};

View File

@ -161,7 +161,7 @@
#address-cells = <1>;
#size-cells = <1>;
elm_id = <&elm>;
ti,elm-id = <&elm>;
/* MTD partition table */
partition@0 {

View File

@ -197,7 +197,7 @@
gpmc,wr-access-ns = <30>;
gpmc,wr-data-mux-bus-ns = <0>;
elm_id = <&elm>;
ti,elm-id = <&elm>;
#address-cells = <1>;
#size-cells = <1>;

View File

@ -70,13 +70,12 @@
* associativity as these may be erroneously set
* up by boot loader(s).
*/
cache-size = <1048576>; // 1MB
cache-sets = <4096>;
cache-size = <131072>; // 128KB
cache-sets = <512>;
cache-line-size = <32>;
arm,parity-disable;
arm,tag-latency = <1>;
arm,data-latency = <1 1>;
arm,dirty-latency = <1>;
arm,tag-latency = <1 1 1>;
arm,data-latency = <1 1 1>;
};
scu: scu@1f000000 {

View File

@ -390,12 +390,12 @@
port@0 {
reg = <0>;
label = "lan1";
label = "lan5";
};
port@1 {
reg = <1>;
label = "lan2";
label = "lan4";
};
port@2 {
@ -405,12 +405,12 @@
port@3 {
reg = <3>;
label = "lan4";
label = "lan2";
};
port@4 {
reg = <4>;
label = "lan5";
label = "lan1";
};
port@5 {

View File

@ -2,6 +2,7 @@
/ {
memory {
device_type = "memory";
reg = <0 0x10000000>;
};

View File

@ -2,7 +2,6 @@
#include <dt-bindings/clock/bcm2835.h>
#include <dt-bindings/clock/bcm2835-aux.h>
#include <dt-bindings/gpio/gpio.h>
#include "skeleton.dtsi"
/* This include file covers the common peripherals and configuration between
* bcm2835 and bcm2836 implementations, leaving the CPU configuration to
@ -13,6 +12,8 @@
compatible = "brcm,bcm2835";
model = "BCM2835";
interrupt-parent = <&intc>;
#address-cells = <1>;
#size-cells = <1>;
chosen {
bootargs = "earlyprintk console=ttyAMA0";

View File

@ -447,14 +447,11 @@
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
samsung,dw-mshc-hs400-timing = <0 2>;
samsung,read-strobe-delay = <90>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
bus-width = <8>;
cap-mmc-highspeed;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
vmmc-supply = <&ldo20_reg>;
vqmmc-supply = <&ldo11_reg>;
};

View File

@ -243,7 +243,7 @@
clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>,
<&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>,
<&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>,
<&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_MLB>,
<&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_DUMMY>,
<&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>;
clock-names = "core", "rxtx0",
"rxtx1", "rxtx2",

View File

@ -64,7 +64,7 @@
cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
no-1-8-v;
keep-power-in-suspend;
enable-sdio-wakup;
wakeup-source;
status = "okay";
};

View File

@ -131,7 +131,7 @@
ti,y-min = /bits/ 16 <0>;
ti,y-max = /bits/ 16 <0>;
ti,pressure-max = /bits/ 16 <0>;
ti,x-plat-ohms = /bits/ 16 <400>;
ti,x-plate-ohms = /bits/ 16 <400>;
wakeup-source;
};
};

View File

@ -42,7 +42,7 @@
};
syscon {
compatible = "arm,integrator-ap-syscon";
compatible = "arm,integrator-ap-syscon", "syscon";
reg = <0x11000000 0x100>;
interrupt-parent = <&pic>;
/* These are the logical module IRQs */

View File

@ -94,7 +94,7 @@
};
syscon {
compatible = "arm,integrator-cp-syscon";
compatible = "arm,integrator-cp-syscon", "syscon";
reg = <0xcb000000 0x100>;
};

View File

@ -70,14 +70,6 @@
cpu_on = <0x84000003>;
};
psci {
compatible = "arm,psci";
method = "smc";
cpu_suspend = <0x84000001>;
cpu_off = <0x84000002>;
cpu_on = <0x84000003>;
};
soc {
#address-cells = <1>;
#size-cells = <1>;

View File

@ -113,7 +113,7 @@
partition@e0000 {
label = "u-boot environment";
reg = <0xe0000 0x100000>;
reg = <0xe0000 0x20000>;
};
partition@100000 {

View File

@ -116,6 +116,10 @@
};
};
&pciec {
status = "okay";
};
&pcie0 {
status = "okay";
};

View File

@ -35,10 +35,15 @@
ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
linux,mtd-name = "micron,mt29f4g16abbda3w";
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
linux,mtd-name = "micron,mt29f4g16abbda3w";
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <44>;
@ -54,10 +59,6 @@
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
gpmc,device-width = <2>;
gpmc,page-burst-access-ns = <5>;
gpmc,cycle2cycle-delay-ns = <50>;
#address-cells = <1>;
#size-cells = <1>;

View File

@ -46,6 +46,7 @@
linux,mtd-name = "micron,mt29f4g16abbda3w";
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <44>;

View File

@ -223,7 +223,9 @@
};
&gpmc {
ranges = <0 0 0x00000000 0x20000000>;
ranges = <0 0 0x30000000 0x1000000>, /* CS0 */
<4 0 0x2b000000 0x1000000>, /* CS4 */
<5 0 0x2c000000 0x1000000>; /* CS5 */
nand@0,0 {
compatible = "ti,omap2-nand";

View File

@ -55,8 +55,6 @@
#include "omap-gpmc-smsc9221.dtsi"
&gpmc {
ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */
ethernet@gpmc {
reg = <5 0 0xff>;
interrupt-parent = <&gpio6>;

View File

@ -27,8 +27,6 @@
#include "omap-gpmc-smsc9221.dtsi"
&gpmc {
ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */
ethernet@gpmc {
reg = <5 0 0xff>;
interrupt-parent = <&gpio6>;

View File

@ -15,9 +15,6 @@
#include "omap-gpmc-smsc9221.dtsi"
&gpmc {
ranges = <4 0 0x2b000000 0x1000000>, /* CS4 */
<5 0 0x2c000000 0x1000000>; /* CS5 */
smsc1: ethernet@gpmc {
reg = <5 0 0xff>;
interrupt-parent = <&gpio6>;

View File

@ -197,6 +197,8 @@
clock-names = "saradc", "apb_pclk";
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
#io-channel-cells = <1>;
resets = <&cru SRST_SARADC>;
reset-names = "saradc-apb";
status = "disabled";
};

View File

@ -279,6 +279,8 @@
#io-channel-cells = <1>;
clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
clock-names = "saradc", "apb_pclk";
resets = <&cru SRST_SARADC>;
reset-names = "saradc-apb";
status = "disabled";
};

View File

@ -399,6 +399,8 @@
#io-channel-cells = <1>;
clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
clock-names = "saradc", "apb_pclk";
resets = <&cru SRST_SARADC>;
reset-names = "saradc-apb";
status = "disabled";
};

View File

@ -550,8 +550,9 @@
interrupt-names = "mmcirq";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc0>;
clock-names = "mmc";
clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
clock-names = "mmc", "icn";
clocks = <&clk_s_c0_flexgen CLK_MMC_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
bus-width = <8>;
non-removable;
};
@ -565,8 +566,9 @@
interrupt-names = "mmcirq";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sd1>;
clock-names = "mmc";
clocks = <&clk_s_c0_flexgen CLK_MMC_1>;
clock-names = "mmc", "icn";
clocks = <&clk_s_c0_flexgen CLK_MMC_1>,
<&clk_s_c0_flexgen CLK_RX_ICN_HVA>;
resets = <&softreset STIH407_MMC1_SOFTRESET>;
bus-width = <4>;
};

View File

@ -41,7 +41,8 @@
compatible = "st,st-ohci-300x";
reg = <0x9a03c00 0x100>;
interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
<&softreset STIH407_USB2_PORT0_SOFTRESET>;
reset-names = "power", "softreset";
@ -57,7 +58,8 @@
interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
<&softreset STIH407_USB2_PORT0_SOFTRESET>;
reset-names = "power", "softreset";
@ -71,7 +73,8 @@
compatible = "st,st-ohci-300x";
reg = <0x9a83c00 0x100>;
interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
<&softreset STIH407_USB2_PORT1_SOFTRESET>;
reset-names = "power", "softreset";
@ -87,7 +90,8 @@
interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>,
<&clk_s_c0_flexgen CLK_RX_ICN_DISP_0>;
resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
<&softreset STIH407_USB2_PORT1_SOFTRESET>;
reset-names = "power", "softreset";

View File

@ -84,7 +84,7 @@
trips {
cpu_alert0: cpu_alert0 {
/* milliCelsius */
temperature = <850000>;
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};

View File

@ -897,7 +897,7 @@
palmas: tps65913@58 {
compatible = "ti,palmas";
reg = <0x58>;
interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;

View File

@ -802,7 +802,7 @@
palmas: pmic@58 {
compatible = "ti,palmas";
reg = <0x58>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;

View File

@ -63,7 +63,7 @@
palmas: pmic@58 {
compatible = "ti,palmas";
reg = <0x58>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
interrupt-controller;

View File

@ -140,7 +140,7 @@ static struct locomo_dev_info locomo_devices[] = {
static void locomo_handler(struct irq_desc *desc)
{
struct locomo *lchip = irq_desc_get_chip_data(desc);
struct locomo *lchip = irq_desc_get_handler_data(desc);
int req, i;
/* Acknowledge the parent IRQ */
@ -200,8 +200,7 @@ static void locomo_setup_irq(struct locomo *lchip)
* Install handler for IRQ_LOCOMO_HW.
*/
irq_set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
irq_set_chip_data(lchip->irq, lchip);
irq_set_chained_handler(lchip->irq, locomo_handler);
irq_set_chained_handler_and_data(lchip->irq, locomo_handler, lchip);
/* Install handlers for IRQ_LOCOMO_* */
for ( ; irq <= lchip->irq_base + 3; irq++) {

View File

@ -472,8 +472,8 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
* specifies that S0ReadyInt and S1ReadyInt should be '1'.
*/
sa1111_writel(0, irqbase + SA1111_INTPOL0);
sa1111_writel(SA1111_IRQMASK_HI(IRQ_S0_READY_NINT) |
SA1111_IRQMASK_HI(IRQ_S1_READY_NINT),
sa1111_writel(BIT(IRQ_S0_READY_NINT & 31) |
BIT(IRQ_S1_READY_NINT & 31),
irqbase + SA1111_INTPOL1);
/* clear all IRQs */
@ -754,7 +754,7 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
if (sachip->irq != NO_IRQ) {
ret = sa1111_setup_irq(sachip, pd->irq_base);
if (ret)
goto err_unmap;
goto err_clk;
}
#ifdef CONFIG_ARCH_SA1100
@ -799,6 +799,8 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
return 0;
err_clk:
clk_disable(sachip->clk);
err_unmap:
iounmap(sachip->base);
err_clk_unprep:
@ -869,9 +871,9 @@ struct sa1111_save_data {
#ifdef CONFIG_PM
static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
static int sa1111_suspend_noirq(struct device *dev)
{
struct sa1111 *sachip = platform_get_drvdata(dev);
struct sa1111 *sachip = dev_get_drvdata(dev);
struct sa1111_save_data *save;
unsigned long flags;
unsigned int val;
@ -934,9 +936,9 @@ static int sa1111_suspend(struct platform_device *dev, pm_message_t state)
* restored by their respective drivers, and must be called
* via LDM after this function.
*/
static int sa1111_resume(struct platform_device *dev)
static int sa1111_resume_noirq(struct device *dev)
{
struct sa1111 *sachip = platform_get_drvdata(dev);
struct sa1111 *sachip = dev_get_drvdata(dev);
struct sa1111_save_data *save;
unsigned long flags, id;
void __iomem *base;
@ -952,7 +954,7 @@ static int sa1111_resume(struct platform_device *dev)
id = sa1111_readl(sachip->base + SA1111_SKID);
if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
__sa1111_remove(sachip);
platform_set_drvdata(dev, NULL);
dev_set_drvdata(dev, NULL);
kfree(save);
return 0;
}
@ -1003,8 +1005,8 @@ static int sa1111_resume(struct platform_device *dev)
}
#else
#define sa1111_suspend NULL
#define sa1111_resume NULL
#define sa1111_suspend_noirq NULL
#define sa1111_resume_noirq NULL
#endif
static int sa1111_probe(struct platform_device *pdev)
@ -1017,7 +1019,7 @@ static int sa1111_probe(struct platform_device *pdev)
return -EINVAL;
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return -ENXIO;
return irq;
return __sa1111_probe(&pdev->dev, mem, irq);
}
@ -1038,6 +1040,11 @@ static int sa1111_remove(struct platform_device *pdev)
return 0;
}
static struct dev_pm_ops sa1111_pm_ops = {
.suspend_noirq = sa1111_suspend_noirq,
.resume_noirq = sa1111_resume_noirq,
};
/*
* Not sure if this should be on the system bus or not yet.
* We really want some way to register a system device at
@ -1050,10 +1057,9 @@ static int sa1111_remove(struct platform_device *pdev)
static struct platform_driver sa1111_device_driver = {
.probe = sa1111_probe,
.remove = sa1111_remove,
.suspend = sa1111_suspend,
.resume = sa1111_resume,
.driver = {
.name = "sa1111",
.pm = &sa1111_pm_ops,
},
};

View File

@ -58,7 +58,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_FANOTIFY=y
CONFIG_PRINTK_TIME=1
CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_PAGE_POISONING=y

View File

@ -59,7 +59,7 @@ CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_FANOTIFY=y
CONFIG_PRINTK_TIME=1
CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_STRIP_ASM_SYMS=y
CONFIG_PAGE_POISONING=y

View File

@ -161,6 +161,7 @@ CONFIG_USB_MON=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_DWC3=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_KEYSTONE_USB_PHY=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

View File

@ -781,7 +781,7 @@ CONFIG_MXS_DMA=y
CONFIG_DMA_BCM2835=y
CONFIG_DMA_OMAP=y
CONFIG_QCOM_BAM_DMA=y
CONFIG_XILINX_VDMA=y
CONFIG_XILINX_DMA=y
CONFIG_DMA_SUN6I=y
CONFIG_STAGING=y
CONFIG_SENSORS_ISL29018=y

View File

@ -47,6 +47,7 @@
#define PMD_SECT_WB (PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
#define PMD_SECT_MINICACHE (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE)
#define PMD_SECT_WBWA (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
#define PMD_SECT_CACHE_MASK (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
#define PMD_SECT_NONSHARED_DEV (PMD_SECT_TEX(2))
/*

View File

@ -62,6 +62,7 @@
#define PMD_SECT_WT (_AT(pmdval_t, 2) << 2) /* normal inner write-through */
#define PMD_SECT_WB (_AT(pmdval_t, 3) << 2) /* normal inner write-back */
#define PMD_SECT_WBWA (_AT(pmdval_t, 7) << 2) /* normal inner write-alloc */
#define PMD_SECT_CACHE_MASK (_AT(pmdval_t, 7) << 2)
/*
* + Level 3 descriptor (PTE)

View File

@ -480,7 +480,10 @@ arm_copy_from_user(void *to, const void __user *from, unsigned long n);
static inline unsigned long __must_check
__copy_from_user(void *to, const void __user *from, unsigned long n)
{
unsigned int __ua_flags = uaccess_save_and_enable();
unsigned int __ua_flags;
check_object_size(to, n, false);
__ua_flags = uaccess_save_and_enable();
n = arm_copy_from_user(to, from, n);
uaccess_restore(__ua_flags);
return n;
@ -495,11 +498,15 @@ static inline unsigned long __must_check
__copy_to_user(void __user *to, const void *from, unsigned long n)
{
#ifndef CONFIG_UACCESS_WITH_MEMCPY
unsigned int __ua_flags = uaccess_save_and_enable();
unsigned int __ua_flags;
check_object_size(from, n, true);
__ua_flags = uaccess_save_and_enable();
n = arm_copy_to_user(to, from, n);
uaccess_restore(__ua_flags);
return n;
#else
check_object_size(from, n, true);
return arm_copy_to_user(to, from, n);
#endif
}

View File

@ -295,6 +295,7 @@ __und_svc_fault:
bl __und_fault
__und_svc_finish:
get_thread_info tsk
ldr r5, [sp, #S_PSR] @ Get SVC cpsr
svc_exit r5 @ return from exception
UNWIND(.fnend )

View File

@ -142,6 +142,19 @@ ARM_BE8(orr r7, r7, #(1 << 25)) @ HSCTLR.EE
and r7, #0x1f @ Preserve HPMN
mcr p15, 4, r7, c1, c1, 1 @ HDCR
@ Make sure NS-SVC is initialised appropriately
mrc p15, 0, r7, c1, c0, 0 @ SCTLR
orr r7, #(1 << 5) @ CP15 barriers enabled
bic r7, #(3 << 7) @ Clear SED/ITD for v8 (RES0 for v7)
bic r7, #(3 << 19) @ WXN and UWXN disabled
mcr p15, 0, r7, c1, c0, 0 @ SCTLR
mrc p15, 0, r7, c0, c0, 0 @ MIDR
mcr p15, 4, r7, c0, c0, 0 @ VPIDR
mrc p15, 0, r7, c0, c0, 5 @ MPIDR
mcr p15, 4, r7, c0, c0, 5 @ VMPIDR
#if !defined(ZIMAGE) && defined(CONFIG_ARM_ARCH_TIMER)
@ make CNTP_* and CNTPCT accessible from PL1
mrc p15, 0, r7, c0, c1, 1 @ ID_PFR1

View File

@ -279,8 +279,12 @@ asmlinkage long sys_oabi_epoll_wait(int epfd,
mm_segment_t fs;
long ret, err, i;
if (maxevents <= 0 || maxevents > (INT_MAX/sizeof(struct epoll_event)))
if (maxevents <= 0 ||
maxevents > (INT_MAX/sizeof(*kbuf)) ||
maxevents > (INT_MAX/sizeof(*events)))
return -EINVAL;
if (!access_ok(VERIFY_WRITE, events, sizeof(*events) * maxevents))
return -EFAULT;
kbuf = kmalloc(sizeof(*kbuf) * maxevents, GFP_KERNEL);
if (!kbuf)
return -ENOMEM;
@ -317,6 +321,8 @@ asmlinkage long sys_oabi_semtimedop(int semid,
if (nsops < 1 || nsops > SEMOPM)
return -EINVAL;
if (!access_ok(VERIFY_READ, tsops, sizeof(*tsops) * nsops))
return -EFAULT;
sops = kmalloc(sizeof(*sops) * nsops, GFP_KERNEL);
if (!sops)
return -ENOMEM;

View File

@ -158,8 +158,6 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
{
int i;
kvm_free_stage2_pgd(kvm);
for (i = 0; i < KVM_MAX_VCPUS; ++i) {
if (kvm->vcpus[i]) {
kvm_arch_vcpu_free(kvm->vcpus[i]);
@ -1009,9 +1007,13 @@ long kvm_arch_vm_ioctl(struct file *filp,
switch (ioctl) {
case KVM_CREATE_IRQCHIP: {
int ret;
if (!vgic_present)
return -ENXIO;
return kvm_vgic_create(kvm, KVM_DEV_TYPE_ARM_VGIC_V2);
mutex_lock(&kvm->lock);
ret = kvm_vgic_create(kvm, KVM_DEV_TYPE_ARM_VGIC_V2);
mutex_unlock(&kvm->lock);
return ret;
}
case KVM_ARM_SET_DEVICE_ADDR: {
struct kvm_arm_device_addr dev_addr;

View File

@ -1309,7 +1309,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
smp_rmb();
pfn = gfn_to_pfn_prot(kvm, gfn, write_fault, &writable);
if (is_error_pfn(pfn))
if (is_error_noslot_pfn(pfn))
return -EFAULT;
if (kvm_is_device_pfn(pfn)) {
@ -1714,7 +1714,8 @@ int kvm_mmu_init(void)
kern_hyp_va(PAGE_OFFSET), kern_hyp_va(~0UL));
if (hyp_idmap_start >= kern_hyp_va(PAGE_OFFSET) &&
hyp_idmap_start < kern_hyp_va(~0UL)) {
hyp_idmap_start < kern_hyp_va(~0UL) &&
hyp_idmap_start != (unsigned long)__hyp_idmap_text_start) {
/*
* The idmap page is intersecting with the VA space,
* it is not safe to continue further.
@ -1893,6 +1894,7 @@ void kvm_arch_memslots_updated(struct kvm *kvm, struct kvm_memslots *slots)
void kvm_arch_flush_shadow_all(struct kvm *kvm)
{
kvm_free_stage2_pgd(kvm);
}
void kvm_arch_flush_shadow_memslot(struct kvm *kvm,

View File

@ -1,13 +1,13 @@
menuconfig ARCH_CLPS711X
bool "Cirrus Logic EP721x/EP731x-based"
depends on ARCH_MULTI_V4T
select ARCH_REQUIRE_GPIOLIB
select AUTO_ZRELADDR
select CLKSRC_OF
select CLPS711X_TIMER
select COMMON_CLK
select CPU_ARM720T
select GENERIC_CLOCKEVENTS
select GPIOLIB
select MFD_SYSCON
select OF_IRQ
select USE_OF

View File

@ -255,6 +255,12 @@ static int __init exynos_pmu_irq_init(struct device_node *node,
return -ENOMEM;
}
/*
* Clear the OF_POPULATED flag set in of_irq_init so that
* later the Exynos PMU platform device won't be skipped.
*/
of_node_clear_flag(node, OF_POPULATED);
return 0;
}

View File

@ -271,6 +271,12 @@ static int __init imx_gpc_init(struct device_node *node,
for (i = 0; i < IMR_NUM; i++)
writel_relaxed(~0, gpc_base + GPC_IMR1 + i * 4);
/*
* Clear the OF_POPULATED flag set in of_irq_init so that
* later the GPC power domain driver will not be skipped.
*/
of_node_clear_flag(node, OF_POPULATED);
return 0;
}
IRQCHIP_DECLARE(imx_gpc, "fsl,imx6q-gpc", imx_gpc_init);

View File

@ -64,6 +64,7 @@ static void __init imx6ul_init_machine(void)
if (parent == NULL)
pr_warn("failed to initialize soc device\n");
of_platform_default_populate(NULL, NULL, parent);
imx6ul_enet_init();
imx_anatop_init();
imx6ul_pm_init();

View File

@ -295,7 +295,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
val &= ~BM_CLPCR_SBYOS;
if (cpu_is_imx6sl())
val |= BM_CLPCR_BYPASS_PMIC_READY;
if (cpu_is_imx6sl() || cpu_is_imx6sx())
if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
else
val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
@ -310,7 +310,7 @@ int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
val |= 0x3 << BP_CLPCR_STBY_COUNT;
val |= BM_CLPCR_VSTBY;
val |= BM_CLPCR_SBYOS;
if (cpu_is_imx6sl())
if (cpu_is_imx6sl() || cpu_is_imx6sx())
val |= BM_CLPCR_BYPASS_PMIC_READY;
if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul())
val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;

View File

@ -1,5 +1,4 @@
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
-I$(srctree)/arch/arm/plat-orion/include
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
AFLAGS_coherency_ll.o := -Wa,-march=armv7-a
CFLAGS_pmsu.o := -march=armv7-a

View File

@ -220,9 +220,6 @@ static int am33xx_cm_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs,
{
int i = 0;
if (!clkctrl_offs)
return 0;
omap_test_timeout(_is_module_ready(inst, clkctrl_offs),
MAX_MODULE_READY_TIME, i);
@ -246,9 +243,6 @@ static int am33xx_cm_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs,
{
int i = 0;
if (!clkctrl_offs)
return 0;
omap_test_timeout((_clkctrl_idlest(inst, clkctrl_offs) ==
CLKCTRL_IDLEST_DISABLED),
MAX_MODULE_READY_TIME, i);

View File

@ -278,9 +278,6 @@ static int omap4_cminst_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs,
{
int i = 0;
if (!clkctrl_offs)
return 0;
omap_test_timeout(_is_module_ready(part, inst, clkctrl_offs),
MAX_MODULE_READY_TIME, i);
@ -304,9 +301,6 @@ static int omap4_cminst_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs,
{
int i = 0;
if (!clkctrl_offs)
return 0;
omap_test_timeout((_clkctrl_idlest(part, inst, clkctrl_offs) ==
CLKCTRL_IDLEST_DISABLED),
MAX_MODULE_DISABLE_TIME, i);

View File

@ -1053,6 +1053,10 @@ static int _omap4_wait_target_disable(struct omap_hwmod *oh)
if (oh->flags & HWMOD_NO_IDLEST)
return 0;
if (!oh->prcm.omap4.clkctrl_offs &&
!(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET))
return 0;
return omap_cm_wait_module_idle(oh->clkdm->prcm_partition,
oh->clkdm->cm_inst,
oh->prcm.omap4.clkctrl_offs, 0);
@ -2971,6 +2975,10 @@ static int _omap4_wait_target_ready(struct omap_hwmod *oh)
if (!_find_mpu_rt_port(oh))
return 0;
if (!oh->prcm.omap4.clkctrl_offs &&
!(oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET))
return 0;
/* XXX check module SIDLEMODE, hardreset status */
return omap_cm_wait_module_ready(oh->clkdm->prcm_partition,

View File

@ -443,8 +443,12 @@ struct omap_hwmod_omap2_prcm {
* HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT: Some IP blocks don't have a PRCM
* module-level context loss register associated with them; this
* flag bit should be set in those cases
* HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET: Some IP blocks have a valid CLKCTRL
* offset of zero; this flag bit should be set in those cases to
* distinguish from hwmods that have no clkctrl offset.
*/
#define HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT (1 << 0)
#define HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET (1 << 1)
/**
* struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data

Some files were not shown because too many files have changed in this diff Show More