mirror of
https://github.com/torvalds/linux.git
synced 2024-12-03 17:41:22 +00:00
w83791d: Documentation update
w83791d: Documentation update The alarm bits and the beep enable bits are in different positions in the hardware. Document the problem and leave it to the user-space code to handle the situation. When this driver is updated to the standardized sysfs alarm/beep methodology, this won't be a problem. This is a documentation only change. Signed-off by: Charles Spirakis <bezaur@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Charles Spirakis
Greg Kroah-Hartman
parent
2d45771e6e
commit
125751cb83
@ -5,7 +5,7 @@ Supported chips:
|
||||
* Winbond W83791D
|
||||
Prefix: 'w83791d'
|
||||
Addresses scanned: I2C 0x2c - 0x2f
|
||||
Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83791Da.pdf
|
||||
Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83791D_W83791Gb.pdf
|
||||
|
||||
Author: Charles Spirakis <bezaur@gmail.com>
|
||||
|
||||
@ -20,6 +20,9 @@ Credits:
|
||||
Chunhao Huang <DZShen@Winbond.com.tw>,
|
||||
Rudolf Marek <r.marek@sh.cvut.cz>
|
||||
|
||||
Additional contributors:
|
||||
Sven Anders <anders@anduras.de>
|
||||
|
||||
Module Parameters
|
||||
-----------------
|
||||
|
||||
@ -46,7 +49,8 @@ Module Parameters
|
||||
Description
|
||||
-----------
|
||||
|
||||
This driver implements support for the Winbond W83791D chip.
|
||||
This driver implements support for the Winbond W83791D chip. The W83791G
|
||||
chip appears to be the same as the W83791D but is lead free.
|
||||
|
||||
Detection of the chip can sometimes be foiled because it can be in an
|
||||
internal state that allows no clean access (Bank with ID register is not
|
||||
@ -71,34 +75,36 @@ Voltage sensors (also known as IN sensors) report their values in millivolts.
|
||||
An alarm is triggered if the voltage has crossed a programmable minimum
|
||||
or maximum limit.
|
||||
|
||||
Alarms are provided as output from a "realtime status register". The
|
||||
following bits are defined:
|
||||
The bit ordering for the alarm "realtime status register" and the
|
||||
"beep enable registers" are different.
|
||||
|
||||
bit - alarm on:
|
||||
0 - Vcore
|
||||
1 - VINR0
|
||||
2 - +3.3VIN
|
||||
3 - 5VDD
|
||||
4 - temp1
|
||||
5 - temp2
|
||||
6 - fan1
|
||||
7 - fan2
|
||||
8 - +12VIN
|
||||
9 - -12VIN
|
||||
10 - -5VIN
|
||||
11 - fan3
|
||||
12 - chassis
|
||||
13 - temp3
|
||||
14 - VINR1
|
||||
15 - reserved
|
||||
16 - tart1
|
||||
17 - tart2
|
||||
18 - tart3
|
||||
19 - VSB
|
||||
20 - VBAT
|
||||
21 - fan4
|
||||
22 - fan5
|
||||
23 - reserved
|
||||
in0 (VCORE) : alarms: 0x000001 beep_enable: 0x000001
|
||||
in1 (VINR0) : alarms: 0x000002 beep_enable: 0x002000 <== mismatch
|
||||
in2 (+3.3VIN): alarms: 0x000004 beep_enable: 0x000004
|
||||
in3 (5VDD) : alarms: 0x000008 beep_enable: 0x000008
|
||||
in4 (+12VIN) : alarms: 0x000100 beep_enable: 0x000100
|
||||
in5 (-12VIN) : alarms: 0x000200 beep_enable: 0x000200
|
||||
in6 (-5VIN) : alarms: 0x000400 beep_enable: 0x000400
|
||||
in7 (VSB) : alarms: 0x080000 beep_enable: 0x010000 <== mismatch
|
||||
in8 (VBAT) : alarms: 0x100000 beep_enable: 0x020000 <== mismatch
|
||||
in9 (VINR1) : alarms: 0x004000 beep_enable: 0x004000
|
||||
temp1 : alarms: 0x000010 beep_enable: 0x000010
|
||||
temp2 : alarms: 0x000020 beep_enable: 0x000020
|
||||
temp3 : alarms: 0x002000 beep_enable: 0x000002 <== mismatch
|
||||
fan1 : alarms: 0x000040 beep_enable: 0x000040
|
||||
fan2 : alarms: 0x000080 beep_enable: 0x000080
|
||||
fan3 : alarms: 0x000800 beep_enable: 0x000800
|
||||
fan4 : alarms: 0x200000 beep_enable: 0x200000
|
||||
fan5 : alarms: 0x400000 beep_enable: 0x400000
|
||||
tart1 : alarms: 0x010000 beep_enable: 0x040000 <== mismatch
|
||||
tart2 : alarms: 0x020000 beep_enable: 0x080000 <== mismatch
|
||||
tart3 : alarms: 0x040000 beep_enable: 0x100000 <== mismatch
|
||||
case_open : alarms: 0x001000 beep_enable: 0x001000
|
||||
user_enable : alarms: -------- beep_enable: 0x800000
|
||||
|
||||
*** NOTE: It is the responsibility of user-space code to handle the fact
|
||||
that the beep enable and alarm bits are in different positions when using that
|
||||
feature of the chip.
|
||||
|
||||
When an alarm goes off, you can be warned by a beeping signal through your
|
||||
computer speaker. It is possible to enable all beeping globally, or only
|
||||
@ -109,5 +115,6 @@ often will do no harm, but will return 'old' values.
|
||||
|
||||
W83791D TODO:
|
||||
---------------
|
||||
Provide a patch for per-file alarms as discussed on the mailing list
|
||||
Provide a patch for per-file alarms and beep enables as defined in the hwmon
|
||||
documentation (Documentation/hwmon/sysfs-interface)
|
||||
Provide a patch for smart-fan control (still need appropriate motherboard/fans)
|
||||
|
||||
@ -27,9 +27,9 @@
|
||||
|
||||
The w83791d chip appears to be part way between the 83781d and the
|
||||
83792d. Thus, this file is derived from both the w83792d.c and
|
||||
w83781d.c files, but its output is more along the lines of the
|
||||
83781d (which means there are no changes to the user-mode sensors
|
||||
program which treats the 83791d as an 83781d).
|
||||
w83781d.c files.
|
||||
|
||||
The w83791g chip is the same as the w83791d but lead-free.
|
||||
*/
|
||||
|
||||
#include <linux/config.h>
|
||||
@ -1172,6 +1172,7 @@ static struct w83791d_data *w83791d_update_device(struct device *dev)
|
||||
(w83791d_read(client, W83791D_REG_BEEP_CTRL[1]) << 8) +
|
||||
(w83791d_read(client, W83791D_REG_BEEP_CTRL[2]) << 16);
|
||||
|
||||
/* Extract global beep enable flag */
|
||||
data->beep_enable =
|
||||
(data->beep_mask >> GLOBAL_BEEP_ENABLE_SHIFT) & 0x01;
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user