From 0ebc581f8a4b7e992bd3bab4d3ad4783245ad09c Mon Sep 17 00:00:00 2001 From: Bartosz Golaszewski Date: Mon, 8 Jul 2024 09:50:23 +0200 Subject: [PATCH] net: phy: aquantia: add support for aqr115c Add support for a new model to the Aquantia driver. This PHY supports 2.5 gigabit speeds. The PHY mode is referred to by the manufacturer as Overclocked SGMII (OCSGMII) but this actually is just 2500BASEX without in-band signalling so reuse the existing mode to avoid changing the uAPI. Signed-off-by: Bartosz Golaszewski Signed-off-by: David S. Miller --- drivers/net/phy/aquantia/aquantia_main.c | 26 ++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/drivers/net/phy/aquantia/aquantia_main.c b/drivers/net/phy/aquantia/aquantia_main.c index 2c8ba2725a91..d12e35374231 100644 --- a/drivers/net/phy/aquantia/aquantia_main.c +++ b/drivers/net/phy/aquantia/aquantia_main.c @@ -29,6 +29,7 @@ #define PHY_ID_AQR113 0x31c31c40 #define PHY_ID_AQR113C 0x31c31c12 #define PHY_ID_AQR114C 0x31c31c22 +#define PHY_ID_AQR115C 0x31c31c33 #define PHY_ID_AQR813 0x31c31cb2 #define MDIO_PHYXS_VEND_IF_STATUS 0xe812 @@ -1005,6 +1006,30 @@ static struct phy_driver aqr_driver[] = { .led_hw_control_get = aqr_phy_led_hw_control_get, .led_polarity_set = aqr_phy_led_polarity_set, }, +{ + PHY_ID_MATCH_MODEL(PHY_ID_AQR115C), + .name = "Aquantia AQR115C", + .probe = aqr107_probe, + .get_rate_matching = aqr107_get_rate_matching, + .config_init = aqr113c_config_init, + .config_aneg = aqr_config_aneg, + .config_intr = aqr_config_intr, + .handle_interrupt = aqr_handle_interrupt, + .read_status = aqr107_read_status, + .get_tunable = aqr107_get_tunable, + .set_tunable = aqr107_set_tunable, + .suspend = aqr107_suspend, + .resume = aqr107_resume, + .get_sset_count = aqr107_get_sset_count, + .get_strings = aqr107_get_strings, + .get_stats = aqr107_get_stats, + .link_change_notify = aqr107_link_change_notify, + .led_brightness_set = aqr_phy_led_brightness_set, + .led_hw_is_supported = aqr_phy_led_hw_is_supported, + .led_hw_control_set = aqr_phy_led_hw_control_set, + .led_hw_control_get = aqr_phy_led_hw_control_get, + .led_polarity_set = aqr_phy_led_polarity_set, +}, { PHY_ID_MATCH_MODEL(PHY_ID_AQR813), .name = "Aquantia AQR813", @@ -1048,6 +1073,7 @@ static struct mdio_device_id __maybe_unused aqr_tbl[] = { { PHY_ID_MATCH_MODEL(PHY_ID_AQR113) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR114C) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR115C) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR813) }, { } };