MIPS: Loongson: Add Loongson-3 Kconfig options

Added Kconfig options include: Loongson-3 CPU and machine definition,
CPU cache features, UEFI-like firmware interface (LEFI), HT-linked PCI,
and swiotlb support.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Hongliang Tao <taohl@lemote.com>
Signed-off-by: Hua Yan <yanh@lemote.com>
Tested-by: Alex Smith <alex.smith@imgtec.com>
Reviewed-by: Alex Smith <alex.smith@imgtec.com>
Cc: John Crispin <john@phrozen.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/6637
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/Kconfig

@@ -1153,6 +1153,18 @@ choice
 	prompt "CPU type"
 	default CPU_R4X00
 
+config CPU_LOONGSON3
+	bool "Loongson 3 CPU"
+	depends on SYS_HAS_CPU_LOONGSON3
+	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+	select CPU_SUPPORTS_HUGEPAGES
+	select WEAK_ORDERING
+	select WEAK_REORDERING_BEYOND_LLSC
+	help
+		The Loongson 3 processor implements the MIPS64R2 instruction
+		set with many extensions.
+
 config CPU_LOONGSON2E
 	bool "Loongson 2E"
 	depends on SYS_HAS_CPU_LOONGSON2E
@@ -1549,6 +1561,10 @@ config CPU_BMIPS5000
 	select SYS_SUPPORTS_SMP
 	select SYS_SUPPORTS_HOTPLUG_CPU
 
+config SYS_HAS_CPU_LOONGSON3
+	bool
+	select CPU_SUPPORTS_CPUFREQ
+
 config SYS_HAS_CPU_LOONGSON2E
 	bool
 
@@ -1761,7 +1777,7 @@ choice
 
 config PAGE_SIZE_4KB
 	bool "4kB"
-	depends on !CPU_LOONGSON2
+	depends on !CPU_LOONGSON2 && !CPU_LOONGSON3
 	help
 	 This option select the standard 4kB Linux page size.  On some
 	 R3000-family processors this is the only available page size.  Using
@@ -2493,6 +2509,17 @@ config PCI
 	  your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
 	  say Y, otherwise N.
 
+config HT_PCI
+	bool "Support for HT-linked PCI"
+	default y
+	depends on CPU_LOONGSON3
+	select PCI
+	select PCI_DOMAINS
+	help
+	  Loongson family machines use Hyper-Transport bus for inter-core
+	  connection and device connection. The PCI bus is a subordinate
+	  linked at HT. Choose Y for Loongson-3 based machines.
+
 config PCI_DOMAINS
 	bool
 

arch/mips/loongson/Kconfig

@@ -59,6 +59,35 @@ config LEMOTE_MACH2F
 
 	  These family machines include fuloong2f mini PC, yeeloong2f notebook,
 	  LingLoong allinone PC and so forth.
+
+config LEMOTE_MACH3A
+	bool "Lemote Loongson 3A family machines"
+	select ARCH_SPARSEMEM_ENABLE
+	select GENERIC_ISA_DMA_SUPPORT_BROKEN
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select BOOT_ELF32
+	select BOARD_SCACHE
+	select CSRC_R4K
+	select CEVT_R4K
+	select CPU_HAS_WB
+	select HW_HAS_PCI
+	select ISA
+	select HT_PCI
+	select I8259
+	select IRQ_CPU
+	select NR_CPUS_DEFAULT_4
+	select SYS_HAS_CPU_LOONGSON3
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_SUPPORTS_SMP
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select LOONGSON_MC146818
+	select ZONE_DMA32
+	select LEFI_FIRMWARE_INTERFACE
+	help
+		Lemote Loongson 3A family machines utilize the 3A revision of
+		Loongson processor and RS780/SBX00 chipset.
 endchoice
 
 config CS5536
@@ -86,8 +115,25 @@ config LOONGSON_UART_BASE
 	default y
 	depends on EARLY_PRINTK || SERIAL_8250
 
+config IOMMU_HELPER
+	bool
+
+config NEED_SG_DMA_LENGTH
+	bool
+
+config SWIOTLB
+	bool "Soft IOMMU Support for All-Memory DMA"
+	default y
+	depends on CPU_LOONGSON3
+	select IOMMU_HELPER
+	select NEED_SG_DMA_LENGTH
+	select NEED_DMA_MAP_STATE
+
 config LOONGSON_MC146818
 	bool
 	default n
 
+config LEFI_FIRMWARE_INTERFACE
+	bool
+
 endif # MACH_LOONGSON

arch/mips/loongson/Platform

@@ -30,3 +30,4 @@ platform-$(CONFIG_MACH_LOONGSON) += loongson/
 cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson -mno-branch-likely
 load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000
 load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000
+load-$(CONFIG_CPU_LOONGSON3) += 0xffffffff80200000