mirror of
https://github.com/torvalds/linux.git
synced 2024-11-24 13:11:40 +00:00
regulator: cpcap: Add basic regulator support
Many Motorola phones like droid 4 are using a custom PMIC called CPCAP or 6556002. This PMIC is used with several SoCs, I've noticed at least omap3, omap4 and Tegra2 based Motorola phones and tablets using it. Cc: devicetree@vger.kernel.org Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Cc: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Tony Lindgren
Mark Brown
parent
d00b74613f
commit
0ad4c07edd
@ -0,0 +1,34 @@
|
|||||||
|
Motorola CPCAP PMIC voltage regulators
|
||||||
|
------------------------------------
|
||||||
|
|
||||||
|
Requires node properties:
|
||||||
|
- "compatible" value one of:
|
||||||
|
"motorola,cpcap-regulator"
|
||||||
|
"motorola,mapphone-cpcap-regulator"
|
||||||
|
|
||||||
|
Required regulator properties:
|
||||||
|
- "regulator-name"
|
||||||
|
- "regulator-enable-ramp-delay"
|
||||||
|
- "regulator-min-microvolt"
|
||||||
|
- "regulator-max-microvolt"
|
||||||
|
|
||||||
|
Optional regulator properties:
|
||||||
|
- "regulator-boot-on"
|
||||||
|
|
||||||
|
See Documentation/devicetree/bindings/regulator/regulator.txt
|
||||||
|
for more details about the regulator properties.
|
||||||
|
|
||||||
|
Example:
|
||||||
|
|
||||||
|
cpcap_regulator: regulator {
|
||||||
|
compatible = "motorola,cpcap-regulator";
|
||||||
|
|
||||||
|
cpcap_regulators: regulators {
|
||||||
|
sw5: SW5 {
|
||||||
|
regulator-min-microvolt = <5050000>;
|
||||||
|
regulator-max-microvolt = <5050000>;
|
||||||
|
regulator-enable-ramp-delay = <50000>;
|
||||||
|
regulator-boot-on;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
@ -163,6 +163,13 @@ config REGULATOR_BCM590XX
|
|||||||
BCM590xx PMUs. This will enable support for the software
|
BCM590xx PMUs. This will enable support for the software
|
||||||
controllable LDO/Switching regulators.
|
controllable LDO/Switching regulators.
|
||||||
|
|
||||||
|
config REGULATOR_CPCAP
|
||||||
|
tristate "Motorola CPCAP regulator"
|
||||||
|
depends on MFD_CPCAP
|
||||||
|
help
|
||||||
|
Say y here for CPCAP regulator found on some Motorola phones
|
||||||
|
and tablets such as Droid 4.
|
||||||
|
|
||||||
config REGULATOR_DA903X
|
config REGULATOR_DA903X
|
||||||
tristate "Dialog Semiconductor DA9030/DA9034 regulators"
|
tristate "Dialog Semiconductor DA9030/DA9034 regulators"
|
||||||
depends on PMIC_DA903X
|
depends on PMIC_DA903X
|
||||||
|
|||||||
@ -11,6 +11,7 @@ obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o
|
|||||||
|
|
||||||
obj-$(CONFIG_REGULATOR_88PM800) += 88pm800.o
|
obj-$(CONFIG_REGULATOR_88PM800) += 88pm800.o
|
||||||
obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
|
obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
|
||||||
|
obj-$(CONFIG_REGULATOR_CPCAP) += cpcap-regulator.o
|
||||||
obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
|
obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
|
||||||
obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
|
obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
|
||||||
obj-$(CONFIG_REGULATOR_AB8500) += ab8500-ext.o ab8500.o
|
obj-$(CONFIG_REGULATOR_AB8500) += ab8500-ext.o ab8500.o
|
||||||
|
|||||||
464
drivers/regulator/cpcap-regulator.c
Normal file
464
drivers/regulator/cpcap-regulator.c
Normal file
@ -0,0 +1,464 @@
|
|||||||
|
/*
|
||||||
|
* Motorola CPCAP PMIC regulator driver
|
||||||
|
*
|
||||||
|
* Based on cpcap-regulator.c from Motorola Linux kernel tree
|
||||||
|
* Copyright (C) 2009-2011 Motorola, Inc.
|
||||||
|
*
|
||||||
|
* Rewritten for mainline kernel to use device tree and regmap
|
||||||
|
* Copyright (C) 2017 Tony Lindgren <tony@atomide.com>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation version 2.
|
||||||
|
*
|
||||||
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
||||||
|
* kind, whether express or implied; without even the implied warranty
|
||||||
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/err.h>
|
||||||
|
#include <linux/module.h>
|
||||||
|
#include <linux/of.h>
|
||||||
|
#include <linux/of_platform.h>
|
||||||
|
#include <linux/regmap.h>
|
||||||
|
#include <linux/regulator/driver.h>
|
||||||
|
#include <linux/regulator/machine.h>
|
||||||
|
#include <linux/regulator/of_regulator.h>
|
||||||
|
#include <linux/mfd/motorola-cpcap.h>
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Resource assignment register bits. These seem to control the state
|
||||||
|
* idle modes adn are used at least for omap4.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* CPCAP_REG_ASSIGN2 bits - Resource Assignment 2 */
|
||||||
|
#define CPCAP_BIT_VSDIO_SEL BIT(15)
|
||||||
|
#define CPCAP_BIT_VDIG_SEL BIT(14)
|
||||||
|
#define CPCAP_BIT_VCAM_SEL BIT(13)
|
||||||
|
#define CPCAP_BIT_SW6_SEL BIT(12)
|
||||||
|
#define CPCAP_BIT_SW5_SEL BIT(11)
|
||||||
|
#define CPCAP_BIT_SW4_SEL BIT(10)
|
||||||
|
#define CPCAP_BIT_SW3_SEL BIT(9)
|
||||||
|
#define CPCAP_BIT_SW2_SEL BIT(8)
|
||||||
|
#define CPCAP_BIT_SW1_SEL BIT(7)
|
||||||
|
|
||||||
|
/* CPCAP_REG_ASSIGN3 bits - Resource Assignment 3 */
|
||||||
|
#define CPCAP_BIT_VUSBINT2_SEL BIT(15)
|
||||||
|
#define CPCAP_BIT_VUSBINT1_SEL BIT(14)
|
||||||
|
#define CPCAP_BIT_VVIB_SEL BIT(13)
|
||||||
|
#define CPCAP_BIT_VWLAN1_SEL BIT(12)
|
||||||
|
#define CPCAP_BIT_VRF1_SEL BIT(11)
|
||||||
|
#define CPCAP_BIT_VHVIO_SEL BIT(10)
|
||||||
|
#define CPCAP_BIT_VDAC_SEL BIT(9)
|
||||||
|
#define CPCAP_BIT_VUSB_SEL BIT(8)
|
||||||
|
#define CPCAP_BIT_VSIM_SEL BIT(7)
|
||||||
|
#define CPCAP_BIT_VRFREF_SEL BIT(6)
|
||||||
|
#define CPCAP_BIT_VPLL_SEL BIT(5)
|
||||||
|
#define CPCAP_BIT_VFUSE_SEL BIT(4)
|
||||||
|
#define CPCAP_BIT_VCSI_SEL BIT(3)
|
||||||
|
#define CPCAP_BIT_SPARE_14_2 BIT(2)
|
||||||
|
#define CPCAP_BIT_VWLAN2_SEL BIT(1)
|
||||||
|
#define CPCAP_BIT_VRF2_SEL BIT(0)
|
||||||
|
|
||||||
|
/* CPCAP_REG_ASSIGN4 bits - Resource Assignment 4 */
|
||||||
|
#define CPCAP_BIT_VAUDIO_SEL BIT(0)
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Enable register bits. At least CPCAP_BIT_AUDIO_LOW_PWR is generic,
|
||||||
|
* and not limited to audio regulator. Let's use the Motorola kernel
|
||||||
|
* naming for now until we have a better understanding of the other
|
||||||
|
* enable register bits. No idea why BIT(3) is not defined.
|
||||||
|
*/
|
||||||
|
#define CPCAP_BIT_AUDIO_LOW_PWR BIT(6)
|
||||||
|
#define CPCAP_BIT_AUD_LOWPWR_SPEED BIT(5)
|
||||||
|
#define CPCAP_BIT_VAUDIOPRISTBY BIT(4)
|
||||||
|
#define CPCAP_BIT_VAUDIO_MODE1 BIT(2)
|
||||||
|
#define CPCAP_BIT_VAUDIO_MODE0 BIT(1)
|
||||||
|
#define CPCAP_BIT_V_AUDIO_EN BIT(0)
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Off mode configuration bit. Used currently only by SW5 on omap4. There's
|
||||||
|
* the following comment in Motorola Linux kernel tree for it:
|
||||||
|
*
|
||||||
|
* When set in the regulator mode, the regulator assignment will be changed
|
||||||
|
* to secondary when the regulator is disabled. The mode will be set back to
|
||||||
|
* primary when the regulator is turned on.
|
||||||
|
*/
|
||||||
|
#define CPCAP_REG_OFF_MODE_SEC BIT(15)
|
||||||
|
|
||||||
|
/**
|
||||||
|
* SoC specific configuraion for CPCAP regulator. There are at least three
|
||||||
|
* different SoCs each with their own parameters: omap3, omap4 and tegra2.
|
||||||
|
*
|
||||||
|
* The assign_reg and assign_mask seem to allow toggling between primary
|
||||||
|
* and secondary mode that at least omap4 uses for off mode.
|
||||||
|
*/
|
||||||
|
struct cpcap_regulator {
|
||||||
|
struct regulator_desc rdesc;
|
||||||
|
const u16 assign_reg;
|
||||||
|
const u16 assign_mask;
|
||||||
|
const u16 vsel_shift;
|
||||||
|
};
|
||||||
|
|
||||||
|
#define CPCAP_REG(_ID, reg, assignment_reg, assignment_mask, val_tbl, \
|
||||||
|
mode_mask, volt_mask, volt_shft, \
|
||||||
|
mode_val, off_val, volt_trans_time) { \
|
||||||
|
.rdesc = { \
|
||||||
|
.name = #_ID, \
|
||||||
|
.of_match = of_match_ptr(#_ID), \
|
||||||
|
.ops = &cpcap_regulator_ops, \
|
||||||
|
.regulators_node = of_match_ptr("regulators"), \
|
||||||
|
.type = REGULATOR_VOLTAGE, \
|
||||||
|
.id = CPCAP_##_ID, \
|
||||||
|
.owner = THIS_MODULE, \
|
||||||
|
.n_voltages = ARRAY_SIZE(val_tbl), \
|
||||||
|
.volt_table = (val_tbl), \
|
||||||
|
.vsel_reg = (reg), \
|
||||||
|
.vsel_mask = (volt_mask), \
|
||||||
|
.enable_reg = (reg), \
|
||||||
|
.enable_mask = (mode_mask), \
|
||||||
|
.enable_val = (mode_val), \
|
||||||
|
.disable_val = (off_val), \
|
||||||
|
.ramp_delay = (volt_trans_time), \
|
||||||
|
}, \
|
||||||
|
.assign_reg = (assignment_reg), \
|
||||||
|
.assign_mask = (assignment_mask), \
|
||||||
|
.vsel_shift = (volt_shft), \
|
||||||
|
}
|
||||||
|
|
||||||
|
struct cpcap_ddata {
|
||||||
|
struct regmap *reg;
|
||||||
|
struct device *dev;
|
||||||
|
const struct cpcap_regulator *soc;
|
||||||
|
};
|
||||||
|
|
||||||
|
enum cpcap_regulator_id {
|
||||||
|
CPCAP_SW1,
|
||||||
|
CPCAP_SW2,
|
||||||
|
CPCAP_SW3,
|
||||||
|
CPCAP_SW4,
|
||||||
|
CPCAP_SW5,
|
||||||
|
CPCAP_SW6,
|
||||||
|
CPCAP_VCAM,
|
||||||
|
CPCAP_VCSI,
|
||||||
|
CPCAP_VDAC,
|
||||||
|
CPCAP_VDIG,
|
||||||
|
CPCAP_VFUSE,
|
||||||
|
CPCAP_VHVIO,
|
||||||
|
CPCAP_VSDIO,
|
||||||
|
CPCAP_VPLL,
|
||||||
|
CPCAP_VRF1,
|
||||||
|
CPCAP_VRF2,
|
||||||
|
CPCAP_VRFREF,
|
||||||
|
CPCAP_VWLAN1,
|
||||||
|
CPCAP_VWLAN2,
|
||||||
|
CPCAP_VSIM,
|
||||||
|
CPCAP_VSIMCARD,
|
||||||
|
CPCAP_VVIB,
|
||||||
|
CPCAP_VUSB,
|
||||||
|
CPCAP_VAUDIO,
|
||||||
|
CPCAP_NR_REGULATORS,
|
||||||
|
};
|
||||||
|
|
||||||
|
/*
|
||||||
|
* We need to also configure regulator idle mode for SoC off mode if
|
||||||
|
* CPCAP_REG_OFF_MODE_SEC is set.
|
||||||
|
*/
|
||||||
|
static int cpcap_regulator_enable(struct regulator_dev *rdev)
|
||||||
|
{
|
||||||
|
struct cpcap_regulator *regulator = rdev_get_drvdata(rdev);
|
||||||
|
int error, ignore;
|
||||||
|
|
||||||
|
error = regulator_enable_regmap(rdev);
|
||||||
|
if (error)
|
||||||
|
return error;
|
||||||
|
|
||||||
|
if (rdev->desc->enable_val & CPCAP_REG_OFF_MODE_SEC) {
|
||||||
|
error = regmap_update_bits(rdev->regmap, regulator->assign_reg,
|
||||||
|
regulator->assign_mask,
|
||||||
|
regulator->assign_mask);
|
||||||
|
if (error)
|
||||||
|
ignore = regulator_disable_regmap(rdev);
|
||||||
|
}
|
||||||
|
|
||||||
|
return error;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* We need to also configure regulator idle mode for SoC off mode if
|
||||||
|
* CPCAP_REG_OFF_MODE_SEC is set.
|
||||||
|
*/
|
||||||
|
static int cpcap_regulator_disable(struct regulator_dev *rdev)
|
||||||
|
{
|
||||||
|
struct cpcap_regulator *regulator = rdev_get_drvdata(rdev);
|
||||||
|
int error, ignore;
|
||||||
|
|
||||||
|
if (rdev->desc->enable_val & CPCAP_REG_OFF_MODE_SEC) {
|
||||||
|
error = regmap_update_bits(rdev->regmap, regulator->assign_reg,
|
||||||
|
regulator->assign_mask, 0);
|
||||||
|
if (error)
|
||||||
|
return error;
|
||||||
|
}
|
||||||
|
|
||||||
|
error = regulator_disable_regmap(rdev);
|
||||||
|
if (error && (rdev->desc->enable_val & CPCAP_REG_OFF_MODE_SEC)) {
|
||||||
|
ignore = regmap_update_bits(rdev->regmap, regulator->assign_reg,
|
||||||
|
regulator->assign_mask,
|
||||||
|
regulator->assign_mask);
|
||||||
|
}
|
||||||
|
|
||||||
|
return error;
|
||||||
|
}
|
||||||
|
|
||||||
|
static unsigned int cpcap_regulator_get_mode(struct regulator_dev *rdev)
|
||||||
|
{
|
||||||
|
int value;
|
||||||
|
|
||||||
|
regmap_read(rdev->regmap, rdev->desc->enable_reg, &value);
|
||||||
|
|
||||||
|
if (!(value & CPCAP_BIT_AUDIO_LOW_PWR))
|
||||||
|
return REGULATOR_MODE_STANDBY;
|
||||||
|
|
||||||
|
return REGULATOR_MODE_NORMAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int cpcap_regulator_set_mode(struct regulator_dev *rdev,
|
||||||
|
unsigned int mode)
|
||||||
|
{
|
||||||
|
int value;
|
||||||
|
|
||||||
|
switch (mode) {
|
||||||
|
case REGULATOR_MODE_NORMAL:
|
||||||
|
value = CPCAP_BIT_AUDIO_LOW_PWR;
|
||||||
|
break;
|
||||||
|
case REGULATOR_MODE_STANDBY:
|
||||||
|
value = 0;
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
|
||||||
|
CPCAP_BIT_AUDIO_LOW_PWR, value);
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct regulator_ops cpcap_regulator_ops = {
|
||||||
|
.enable = cpcap_regulator_enable,
|
||||||
|
.disable = cpcap_regulator_disable,
|
||||||
|
.is_enabled = regulator_is_enabled_regmap,
|
||||||
|
.list_voltage = regulator_list_voltage_table,
|
||||||
|
.map_voltage = regulator_map_voltage_iterate,
|
||||||
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||||
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||||
|
.get_mode = cpcap_regulator_get_mode,
|
||||||
|
.set_mode = cpcap_regulator_set_mode,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const unsigned int unknown_val_tbl[] = { 0, };
|
||||||
|
static const unsigned int sw5_val_tbl[] = { 0, 5050000, };
|
||||||
|
static const unsigned int vcam_val_tbl[] = { 2600000, 2700000, 2800000,
|
||||||
|
2900000, };
|
||||||
|
static const unsigned int vcsi_val_tbl[] = { 1200000, 1800000, };
|
||||||
|
static const unsigned int vdac_val_tbl[] = { 1200000, 1500000, 1800000,
|
||||||
|
2500000,};
|
||||||
|
static const unsigned int vdig_val_tbl[] = { 1200000, 1350000, 1500000,
|
||||||
|
1875000, };
|
||||||
|
static const unsigned int vfuse_val_tbl[] = { 1500000, 1600000, 1700000,
|
||||||
|
1800000, 1900000, 2000000,
|
||||||
|
2100000, 2200000, 2300000,
|
||||||
|
2400000, 2500000, 2600000,
|
||||||
|
2700000, 3150000, };
|
||||||
|
static const unsigned int vhvio_val_tbl[] = { 2775000, };
|
||||||
|
static const unsigned int vsdio_val_tbl[] = { 1500000, 1600000, 1800000,
|
||||||
|
2600000, 2700000, 2800000,
|
||||||
|
2900000, 3000000, };
|
||||||
|
static const unsigned int vpll_val_tbl[] = { 1200000, 1300000, 1400000,
|
||||||
|
1800000, };
|
||||||
|
/* Quirk: 2775000 is before 2500000 for vrf1 regulator */
|
||||||
|
static const unsigned int vrf1_val_tbl[] = { 2775000, 2500000, };
|
||||||
|
static const unsigned int vrf2_val_tbl[] = { 0, 2775000, };
|
||||||
|
static const unsigned int vrfref_val_tbl[] = { 2500000, 2775000, };
|
||||||
|
static const unsigned int vwlan1_val_tbl[] = { 1800000, 1900000, };
|
||||||
|
static const unsigned int vwlan2_val_tbl[] = { 2775000, 3000000, 3300000,
|
||||||
|
3300000, };
|
||||||
|
static const unsigned int vsim_val_tbl[] = { 1800000, 2900000, };
|
||||||
|
static const unsigned int vsimcard_val_tbl[] = { 1800000, 2900000, };
|
||||||
|
static const unsigned int vvib_val_tbl[] = { 1300000, 1800000, 2000000,
|
||||||
|
3000000, };
|
||||||
|
static const unsigned int vusb_val_tbl[] = { 0, 3300000, };
|
||||||
|
static const unsigned int vaudio_val_tbl[] = { 0, 2775000, };
|
||||||
|
|
||||||
|
/**
|
||||||
|
* SoC specific configuration for omap4. The data below is comes from Motorola
|
||||||
|
* Linux kernel tree. It's basically the values of cpcap_regltr_data,
|
||||||
|
* cpcap_regulator_mode_values and cpcap_regulator_off_mode_values, see
|
||||||
|
* CPCAP_REG macro above.
|
||||||
|
*
|
||||||
|
* SW1 to SW4 and SW6 seems to be unused for mapphone. Note that VSIM and
|
||||||
|
* VSIMCARD have a shared resource assignment bit.
|
||||||
|
*/
|
||||||
|
static struct cpcap_regulator omap4_regulators[] = {
|
||||||
|
CPCAP_REG(SW1, CPCAP_REG_S1C1, CPCAP_REG_ASSIGN2,
|
||||||
|
CPCAP_BIT_SW1_SEL, unknown_val_tbl,
|
||||||
|
0, 0, 0, 0, 0, 0),
|
||||||
|
CPCAP_REG(SW2, CPCAP_REG_S2C1, CPCAP_REG_ASSIGN2,
|
||||||
|
CPCAP_BIT_SW2_SEL, unknown_val_tbl,
|
||||||
|
0, 0, 0, 0, 0, 0),
|
||||||
|
CPCAP_REG(SW3, CPCAP_REG_S3C, CPCAP_REG_ASSIGN2,
|
||||||
|
CPCAP_BIT_SW3_SEL, unknown_val_tbl,
|
||||||
|
0, 0, 0, 0, 0, 0),
|
||||||
|
CPCAP_REG(SW4, CPCAP_REG_S4C1, CPCAP_REG_ASSIGN2,
|
||||||
|
CPCAP_BIT_SW4_SEL, unknown_val_tbl,
|
||||||
|
0, 0, 0, 0, 0, 0),
|
||||||
|
CPCAP_REG(SW5, CPCAP_REG_S5C, CPCAP_REG_ASSIGN2,
|
||||||
|
CPCAP_BIT_SW5_SEL, sw5_val_tbl,
|
||||||
|
0x28, 0, 0, 0x20 | CPCAP_REG_OFF_MODE_SEC, 0, 0),
|
||||||
|
CPCAP_REG(SW6, CPCAP_REG_S6C, CPCAP_REG_ASSIGN2,
|
||||||
|
CPCAP_BIT_SW6_SEL, unknown_val_tbl,
|
||||||
|
0, 0, 0, 0, 0, 0),
|
||||||
|
CPCAP_REG(VCAM, CPCAP_REG_VCAMC, CPCAP_REG_ASSIGN2,
|
||||||
|
CPCAP_BIT_VCAM_SEL, vcam_val_tbl,
|
||||||
|
0x87, 0x30, 4, 0x3, 0, 420),
|
||||||
|
CPCAP_REG(VCSI, CPCAP_REG_VCSIC, CPCAP_REG_ASSIGN3,
|
||||||
|
CPCAP_BIT_VCSI_SEL, vcsi_val_tbl,
|
||||||
|
0x47, 0x10, 4, 0x43, 0x41, 350),
|
||||||
|
CPCAP_REG(VDAC, CPCAP_REG_VDACC, CPCAP_REG_ASSIGN3,
|
||||||
|
CPCAP_BIT_VDAC_SEL, vdac_val_tbl,
|
||||||
|
0x87, 0x30, 4, 0x3, 0, 420),
|
||||||
|
CPCAP_REG(VDIG, CPCAP_REG_VDIGC, CPCAP_REG_ASSIGN2,
|
||||||
|
CPCAP_BIT_VDIG_SEL, vdig_val_tbl,
|
||||||
|
0x87, 0x30, 4, 0x82, 0, 420),
|
||||||
|
CPCAP_REG(VFUSE, CPCAP_REG_VFUSEC, CPCAP_REG_ASSIGN3,
|
||||||
|
CPCAP_BIT_VFUSE_SEL, vfuse_val_tbl,
|
||||||
|
0x80, 0xf, 0, 0x80, 0, 420),
|
||||||
|
CPCAP_REG(VHVIO, CPCAP_REG_VHVIOC, CPCAP_REG_ASSIGN3,
|
||||||
|
CPCAP_BIT_VHVIO_SEL, vhvio_val_tbl,
|
||||||
|
0x17, 0, 0, 0, 0x12, 0),
|
||||||
|
CPCAP_REG(VSDIO, CPCAP_REG_VSDIOC, CPCAP_REG_ASSIGN2,
|
||||||
|
CPCAP_BIT_VSDIO_SEL, vsdio_val_tbl,
|
||||||
|
0x87, 0x38, 3, 0x82, 0, 420),
|
||||||
|
CPCAP_REG(VPLL, CPCAP_REG_VPLLC, CPCAP_REG_ASSIGN3,
|
||||||
|
CPCAP_BIT_VPLL_SEL, vpll_val_tbl,
|
||||||
|
0x43, 0x18, 3, 0x2, 0, 420),
|
||||||
|
CPCAP_REG(VRF1, CPCAP_REG_VRF1C, CPCAP_REG_ASSIGN3,
|
||||||
|
CPCAP_BIT_VRF1_SEL, vrf1_val_tbl,
|
||||||
|
0xac, 0x2, 1, 0x4, 0, 10),
|
||||||
|
CPCAP_REG(VRF2, CPCAP_REG_VRF2C, CPCAP_REG_ASSIGN3,
|
||||||
|
CPCAP_BIT_VRF2_SEL, vrf2_val_tbl,
|
||||||
|
0x23, 0x8, 3, 0, 0, 10),
|
||||||
|
CPCAP_REG(VRFREF, CPCAP_REG_VRFREFC, CPCAP_REG_ASSIGN3,
|
||||||
|
CPCAP_BIT_VRFREF_SEL, vrfref_val_tbl,
|
||||||
|
0x23, 0x8, 3, 0, 0, 420),
|
||||||
|
CPCAP_REG(VWLAN1, CPCAP_REG_VWLAN1C, CPCAP_REG_ASSIGN3,
|
||||||
|
CPCAP_BIT_VWLAN1_SEL, vwlan1_val_tbl,
|
||||||
|
0x47, 0x10, 4, 0, 0, 420),
|
||||||
|
CPCAP_REG(VWLAN2, CPCAP_REG_VWLAN2C, CPCAP_REG_ASSIGN3,
|
||||||
|
CPCAP_BIT_VWLAN2_SEL, vwlan2_val_tbl,
|
||||||
|
0x20c, 0xc0, 6, 0x20c, 0, 420),
|
||||||
|
CPCAP_REG(VSIM, CPCAP_REG_VSIMC, CPCAP_REG_ASSIGN3,
|
||||||
|
0xffff, vsim_val_tbl,
|
||||||
|
0x23, 0x8, 3, 0x3, 0, 420),
|
||||||
|
CPCAP_REG(VSIMCARD, CPCAP_REG_VSIMC, CPCAP_REG_ASSIGN3,
|
||||||
|
0xffff, vsimcard_val_tbl,
|
||||||
|
0x1e80, 0x8, 3, 0x1e00, 0, 420),
|
||||||
|
CPCAP_REG(VVIB, CPCAP_REG_VVIBC, CPCAP_REG_ASSIGN3,
|
||||||
|
CPCAP_BIT_VVIB_SEL, vvib_val_tbl,
|
||||||
|
0x1, 0xc, 2, 0x1, 0, 500),
|
||||||
|
CPCAP_REG(VUSB, CPCAP_REG_VUSBC, CPCAP_REG_ASSIGN3,
|
||||||
|
CPCAP_BIT_VUSB_SEL, vusb_val_tbl,
|
||||||
|
0x11c, 0x40, 6, 0xc, 0, 0),
|
||||||
|
CPCAP_REG(VAUDIO, CPCAP_REG_VAUDIOC, CPCAP_REG_ASSIGN4,
|
||||||
|
CPCAP_BIT_VAUDIO_SEL, vaudio_val_tbl,
|
||||||
|
0x16, 0x1, 0, 0x4, 0, 0),
|
||||||
|
{ /* sentinel */ },
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct of_device_id cpcap_regulator_id_table[] = {
|
||||||
|
{
|
||||||
|
.compatible = "motorola,cpcap-regulator",
|
||||||
|
},
|
||||||
|
{
|
||||||
|
.compatible = "motorola,mapphone-cpcap-regulator",
|
||||||
|
.data = omap4_regulators,
|
||||||
|
},
|
||||||
|
{},
|
||||||
|
};
|
||||||
|
MODULE_DEVICE_TABLE(of, cpcap_regulator_id_table);
|
||||||
|
|
||||||
|
static int cpcap_regulator_probe(struct platform_device *pdev)
|
||||||
|
{
|
||||||
|
struct cpcap_ddata *ddata;
|
||||||
|
const struct of_device_id *match;
|
||||||
|
struct regulator_config config;
|
||||||
|
struct regulator_init_data init_data;
|
||||||
|
int i;
|
||||||
|
|
||||||
|
match = of_match_device(of_match_ptr(cpcap_regulator_id_table),
|
||||||
|
&pdev->dev);
|
||||||
|
if (!match)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
if (!match->data) {
|
||||||
|
dev_err(&pdev->dev, "no configuration data found\n");
|
||||||
|
|
||||||
|
return -ENODEV;
|
||||||
|
}
|
||||||
|
|
||||||
|
ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
|
||||||
|
if (!ddata)
|
||||||
|
return -ENOMEM;
|
||||||
|
|
||||||
|
ddata->reg = dev_get_regmap(pdev->dev.parent, NULL);
|
||||||
|
if (!ddata->reg)
|
||||||
|
return -ENODEV;
|
||||||
|
|
||||||
|
ddata->dev = &pdev->dev;
|
||||||
|
ddata->soc = match->data;
|
||||||
|
platform_set_drvdata(pdev, ddata);
|
||||||
|
|
||||||
|
memset(&config, 0, sizeof(config));
|
||||||
|
memset(&init_data, 0, sizeof(init_data));
|
||||||
|
config.dev = &pdev->dev;
|
||||||
|
config.regmap = ddata->reg;
|
||||||
|
config.init_data = &init_data;
|
||||||
|
|
||||||
|
for (i = 0; i < CPCAP_NR_REGULATORS; i++) {
|
||||||
|
const struct cpcap_regulator *regulator = &ddata->soc[i];
|
||||||
|
struct regulator_dev *rdev;
|
||||||
|
|
||||||
|
if (!regulator->rdesc.name)
|
||||||
|
break;
|
||||||
|
|
||||||
|
if (regulator->rdesc.volt_table == unknown_val_tbl)
|
||||||
|
continue;
|
||||||
|
|
||||||
|
config.driver_data = (void *)regulator;
|
||||||
|
rdev = devm_regulator_register(&pdev->dev,
|
||||||
|
®ulator->rdesc,
|
||||||
|
&config);
|
||||||
|
if (IS_ERR(rdev)) {
|
||||||
|
dev_err(&pdev->dev, "failed to register regulator %s\n",
|
||||||
|
regulator->rdesc.name);
|
||||||
|
|
||||||
|
return PTR_ERR(rdev);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct platform_driver cpcap_regulator_driver = {
|
||||||
|
.probe = cpcap_regulator_probe,
|
||||||
|
.driver = {
|
||||||
|
.name = "cpcap-regulator",
|
||||||
|
.of_match_table = of_match_ptr(cpcap_regulator_id_table),
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
module_platform_driver(cpcap_regulator_driver);
|
||||||
|
|
||||||
|
MODULE_ALIAS("platform:cpcap-regulator");
|
||||||
|
MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
|
||||||
|
MODULE_DESCRIPTION("CPCAP regulator driver");
|
||||||
|
MODULE_LICENSE("GPL v2");
|
||||||
Loading…
Reference in New Issue
Block a user