mirror of
https://github.com/torvalds/linux.git
synced 2024-11-25 21:51:40 +00:00
drm: panel: Add LG sw43408 panel driver
LG SW43408 is 1080x2160@60Hz, 4-lane MIPI-DSI panel, used in some Google Pixel-3 phones. Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> [vinod: Add DSC support] Signed-off-by: Vinod Koul <vkoul@kernel.org> [caleb: cleanup and support turning off the panel] Signed-off-by: Caleb Connolly <caleb@connolly.tech> [DB: partially rewrote the driver and fixed DSC programming] Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240408-lg-sw43408-panel-v5-4-4e092da22991@linaro.org
This commit is contained in:
parent
b724455e89
commit
069a6c0e94
@ -6764,6 +6764,14 @@ S: Maintained
|
||||
F: Documentation/devicetree/bindings/display/panel/jadard,jd9365da-h3.yaml
|
||||
F: drivers/gpu/drm/panel/panel-jadard-jd9365da-h3.c
|
||||
|
||||
DRM DRIVER FOR LG SW43408 PANELS
|
||||
M: Sumit Semwal <sumit.semwal@linaro.org>
|
||||
M: Caleb Connolly <caleb.connolly@linaro.org>
|
||||
S: Maintained
|
||||
T: git git://anongit.freedesktop.org/drm/drm-misc
|
||||
F: Documentation/devicetree/bindings/display/panel/lg,sw43408.yaml
|
||||
F: drivers/gpu/drm/panel/panel-lg-sw43408.c
|
||||
|
||||
DRM DRIVER FOR LOGICVC DISPLAY CONTROLLER
|
||||
M: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
|
||||
S: Supported
|
||||
|
@ -335,6 +335,17 @@ config DRM_PANEL_LG_LG4573
|
||||
Say Y here if you want to enable support for LG4573 RGB panel.
|
||||
To compile this driver as a module, choose M here.
|
||||
|
||||
config DRM_PANEL_LG_SW43408
|
||||
tristate "LG SW43408 panel"
|
||||
depends on OF
|
||||
depends on DRM_MIPI_DSI
|
||||
depends on BACKLIGHT_CLASS_DEVICE
|
||||
help
|
||||
Say Y here if you want to enable support for LG sw43408 panel.
|
||||
The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per
|
||||
pixel. It provides a MIPI DSI interface to the host and has a
|
||||
built-in LED backlight.
|
||||
|
||||
config DRM_PANEL_MAGNACHIP_D53E6EA8966
|
||||
tristate "Magnachip D53E6EA8966 DSI panel"
|
||||
depends on OF && SPI
|
||||
|
@ -34,6 +34,7 @@ obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W) += panel-leadtek-ltk050h3146w.o
|
||||
obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829) += panel-leadtek-ltk500hd1829.o
|
||||
obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o
|
||||
obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
|
||||
obj-$(CONFIG_DRM_PANEL_LG_SW43408) += panel-lg-sw43408.o
|
||||
obj-$(CONFIG_DRM_PANEL_MAGNACHIP_D53E6EA8966) += panel-magnachip-d53e6ea8966.o
|
||||
obj-$(CONFIG_DRM_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
|
||||
obj-$(CONFIG_DRM_PANEL_NEWVISION_NV3051D) += panel-newvision-nv3051d.o
|
||||
|
320
drivers/gpu/drm/panel/panel-lg-sw43408.c
Normal file
320
drivers/gpu/drm/panel/panel-lg-sw43408.c
Normal file
@ -0,0 +1,320 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright (C) 2019-2024 Linaro Ltd
|
||||
* Author: Sumit Semwal <sumit.semwal@linaro.org>
|
||||
* Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
||||
*/
|
||||
|
||||
#include <linux/backlight.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/regulator/consumer.h>
|
||||
|
||||
#include <video/mipi_display.h>
|
||||
|
||||
#include <drm/drm_mipi_dsi.h>
|
||||
#include <drm/drm_panel.h>
|
||||
#include <drm/drm_probe_helper.h>
|
||||
#include <drm/display/drm_dsc.h>
|
||||
#include <drm/display/drm_dsc_helper.h>
|
||||
|
||||
#define NUM_SUPPLIES 2
|
||||
|
||||
struct sw43408_panel {
|
||||
struct drm_panel base;
|
||||
struct mipi_dsi_device *link;
|
||||
|
||||
struct regulator_bulk_data supplies[NUM_SUPPLIES];
|
||||
|
||||
struct gpio_desc *reset_gpio;
|
||||
|
||||
struct drm_dsc_config dsc;
|
||||
};
|
||||
|
||||
static inline struct sw43408_panel *to_panel_info(struct drm_panel *panel)
|
||||
{
|
||||
return container_of(panel, struct sw43408_panel, base);
|
||||
}
|
||||
|
||||
static int sw43408_unprepare(struct drm_panel *panel)
|
||||
{
|
||||
struct sw43408_panel *ctx = to_panel_info(panel);
|
||||
int ret;
|
||||
|
||||
ret = mipi_dsi_dcs_set_display_off(ctx->link);
|
||||
if (ret < 0)
|
||||
dev_err(panel->dev, "set_display_off cmd failed ret = %d\n", ret);
|
||||
|
||||
ret = mipi_dsi_dcs_enter_sleep_mode(ctx->link);
|
||||
if (ret < 0)
|
||||
dev_err(panel->dev, "enter_sleep cmd failed ret = %d\n", ret);
|
||||
|
||||
msleep(100);
|
||||
|
||||
gpiod_set_value(ctx->reset_gpio, 1);
|
||||
|
||||
return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
|
||||
}
|
||||
|
||||
static int sw43408_program(struct drm_panel *panel)
|
||||
{
|
||||
struct sw43408_panel *ctx = to_panel_info(panel);
|
||||
struct drm_dsc_picture_parameter_set pps;
|
||||
|
||||
mipi_dsi_dcs_write_seq(ctx->link, MIPI_DCS_SET_GAMMA_CURVE, 0x02);
|
||||
|
||||
mipi_dsi_dcs_set_tear_on(ctx->link, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
|
||||
|
||||
mipi_dsi_dcs_write_seq(ctx->link, 0x53, 0x0c, 0x30);
|
||||
mipi_dsi_dcs_write_seq(ctx->link, 0x55, 0x00, 0x70, 0xdf, 0x00, 0x70, 0xdf);
|
||||
mipi_dsi_dcs_write_seq(ctx->link, 0xf7, 0x01, 0x49, 0x0c);
|
||||
|
||||
mipi_dsi_dcs_exit_sleep_mode(ctx->link);
|
||||
|
||||
msleep(135);
|
||||
|
||||
/* COMPRESSION_MODE moved after setting the PPS */
|
||||
|
||||
mipi_dsi_dcs_write_seq(ctx->link, 0xb0, 0xac);
|
||||
mipi_dsi_dcs_write_seq(ctx->link, 0xe5,
|
||||
0x00, 0x3a, 0x00, 0x3a, 0x00, 0x0e, 0x10);
|
||||
mipi_dsi_dcs_write_seq(ctx->link, 0xb5,
|
||||
0x75, 0x60, 0x2d, 0x5d, 0x80, 0x00, 0x0a, 0x0b,
|
||||
0x00, 0x05, 0x0b, 0x00, 0x80, 0x0d, 0x0e, 0x40,
|
||||
0x00, 0x0c, 0x00, 0x16, 0x00, 0xb8, 0x00, 0x80,
|
||||
0x0d, 0x0e, 0x40, 0x00, 0x0c, 0x00, 0x16, 0x00,
|
||||
0xb8, 0x00, 0x81, 0x00, 0x03, 0x03, 0x03, 0x01,
|
||||
0x01);
|
||||
msleep(85);
|
||||
mipi_dsi_dcs_write_seq(ctx->link, 0xcd,
|
||||
0x00, 0x00, 0x00, 0x19, 0x19, 0x19, 0x19, 0x19,
|
||||
0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19, 0x19,
|
||||
0x16, 0x16);
|
||||
mipi_dsi_dcs_write_seq(ctx->link, 0xcb, 0x80, 0x5c, 0x07, 0x03, 0x28);
|
||||
mipi_dsi_dcs_write_seq(ctx->link, 0xc0, 0x02, 0x02, 0x0f);
|
||||
mipi_dsi_dcs_write_seq(ctx->link, 0x55, 0x04, 0x61, 0xdb, 0x04, 0x70, 0xdb);
|
||||
mipi_dsi_dcs_write_seq(ctx->link, 0xb0, 0xca);
|
||||
|
||||
mipi_dsi_dcs_set_display_on(ctx->link);
|
||||
|
||||
msleep(50);
|
||||
|
||||
ctx->link->mode_flags &= ~MIPI_DSI_MODE_LPM;
|
||||
|
||||
drm_dsc_pps_payload_pack(&pps, ctx->link->dsc);
|
||||
mipi_dsi_picture_parameter_set(ctx->link, &pps);
|
||||
|
||||
ctx->link->mode_flags |= MIPI_DSI_MODE_LPM;
|
||||
|
||||
/*
|
||||
* This panel uses PPS selectors with offset:
|
||||
* PPS 1 if pps_identifier is 0
|
||||
* PPS 2 if pps_identifier is 1
|
||||
*/
|
||||
mipi_dsi_compression_mode_ext(ctx->link, true,
|
||||
MIPI_DSI_COMPRESSION_DSC, 1);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int sw43408_prepare(struct drm_panel *panel)
|
||||
{
|
||||
struct sw43408_panel *ctx = to_panel_info(panel);
|
||||
int ret;
|
||||
|
||||
ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
usleep_range(5000, 6000);
|
||||
|
||||
gpiod_set_value(ctx->reset_gpio, 0);
|
||||
usleep_range(9000, 10000);
|
||||
gpiod_set_value(ctx->reset_gpio, 1);
|
||||
usleep_range(1000, 2000);
|
||||
gpiod_set_value(ctx->reset_gpio, 0);
|
||||
usleep_range(9000, 10000);
|
||||
|
||||
ret = sw43408_program(panel);
|
||||
if (ret)
|
||||
goto poweroff;
|
||||
|
||||
return 0;
|
||||
|
||||
poweroff:
|
||||
gpiod_set_value(ctx->reset_gpio, 1);
|
||||
regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static const struct drm_display_mode sw43408_mode = {
|
||||
.clock = (1080 + 20 + 32 + 20) * (2160 + 20 + 4 + 20) * 60 / 1000,
|
||||
|
||||
.hdisplay = 1080,
|
||||
.hsync_start = 1080 + 20,
|
||||
.hsync_end = 1080 + 20 + 32,
|
||||
.htotal = 1080 + 20 + 32 + 20,
|
||||
|
||||
.vdisplay = 2160,
|
||||
.vsync_start = 2160 + 20,
|
||||
.vsync_end = 2160 + 20 + 4,
|
||||
.vtotal = 2160 + 20 + 4 + 20,
|
||||
|
||||
.width_mm = 62,
|
||||
.height_mm = 124,
|
||||
|
||||
.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
|
||||
};
|
||||
|
||||
static int sw43408_get_modes(struct drm_panel *panel,
|
||||
struct drm_connector *connector)
|
||||
{
|
||||
return drm_connector_helper_get_modes_fixed(connector, &sw43408_mode);
|
||||
}
|
||||
|
||||
static int sw43408_backlight_update_status(struct backlight_device *bl)
|
||||
{
|
||||
struct mipi_dsi_device *dsi = bl_get_data(bl);
|
||||
u16 brightness = backlight_get_brightness(bl);
|
||||
|
||||
return mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
|
||||
}
|
||||
|
||||
const struct backlight_ops sw43408_backlight_ops = {
|
||||
.update_status = sw43408_backlight_update_status,
|
||||
};
|
||||
|
||||
static int sw43408_backlight_init(struct sw43408_panel *ctx)
|
||||
{
|
||||
struct device *dev = &ctx->link->dev;
|
||||
const struct backlight_properties props = {
|
||||
.type = BACKLIGHT_PLATFORM,
|
||||
.brightness = 255,
|
||||
.max_brightness = 255,
|
||||
};
|
||||
|
||||
ctx->base.backlight = devm_backlight_device_register(dev, dev_name(dev), dev,
|
||||
ctx->link,
|
||||
&sw43408_backlight_ops,
|
||||
&props);
|
||||
|
||||
if (IS_ERR(ctx->base.backlight))
|
||||
return dev_err_probe(dev, PTR_ERR(ctx->base.backlight),
|
||||
"Failed to create backlight\n");
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct drm_panel_funcs sw43408_funcs = {
|
||||
.unprepare = sw43408_unprepare,
|
||||
.prepare = sw43408_prepare,
|
||||
.get_modes = sw43408_get_modes,
|
||||
};
|
||||
|
||||
static const struct of_device_id sw43408_of_match[] = {
|
||||
{ .compatible = "lg,sw43408", },
|
||||
{ /* sentinel */ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, sw43408_of_match);
|
||||
|
||||
static int sw43408_add(struct sw43408_panel *ctx)
|
||||
{
|
||||
struct device *dev = &ctx->link->dev;
|
||||
int ret;
|
||||
|
||||
ctx->supplies[0].supply = "vddi"; /* 1.88 V */
|
||||
ctx->supplies[0].init_load_uA = 62000;
|
||||
ctx->supplies[1].supply = "vpnl"; /* 3.0 V */
|
||||
ctx->supplies[1].init_load_uA = 857000;
|
||||
|
||||
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
|
||||
ctx->supplies);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
|
||||
if (IS_ERR(ctx->reset_gpio)) {
|
||||
ret = PTR_ERR(ctx->reset_gpio);
|
||||
return dev_err_probe(dev, ret, "cannot get reset gpio\n");
|
||||
}
|
||||
|
||||
ret = sw43408_backlight_init(ctx);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ctx->base.prepare_prev_first = true;
|
||||
|
||||
drm_panel_init(&ctx->base, dev, &sw43408_funcs, DRM_MODE_CONNECTOR_DSI);
|
||||
|
||||
drm_panel_add(&ctx->base);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int sw43408_probe(struct mipi_dsi_device *dsi)
|
||||
{
|
||||
struct sw43408_panel *ctx;
|
||||
int ret;
|
||||
|
||||
ctx = devm_kzalloc(&dsi->dev, sizeof(*ctx), GFP_KERNEL);
|
||||
if (!ctx)
|
||||
return -ENOMEM;
|
||||
|
||||
dsi->mode_flags = MIPI_DSI_MODE_LPM;
|
||||
dsi->format = MIPI_DSI_FMT_RGB888;
|
||||
dsi->lanes = 4;
|
||||
|
||||
ctx->link = dsi;
|
||||
mipi_dsi_set_drvdata(dsi, ctx);
|
||||
|
||||
ret = sw43408_add(ctx);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
/* The panel works only in the DSC mode. Set DSC params. */
|
||||
ctx->dsc.dsc_version_major = 0x1;
|
||||
ctx->dsc.dsc_version_minor = 0x1;
|
||||
|
||||
/* slice_count * slice_width == width */
|
||||
ctx->dsc.slice_height = 16;
|
||||
ctx->dsc.slice_width = 540;
|
||||
ctx->dsc.slice_count = 2;
|
||||
ctx->dsc.bits_per_component = 8;
|
||||
ctx->dsc.bits_per_pixel = 8 << 4;
|
||||
ctx->dsc.block_pred_enable = true;
|
||||
|
||||
dsi->dsc = &ctx->dsc;
|
||||
|
||||
return mipi_dsi_attach(dsi);
|
||||
}
|
||||
|
||||
static void sw43408_remove(struct mipi_dsi_device *dsi)
|
||||
{
|
||||
struct sw43408_panel *ctx = mipi_dsi_get_drvdata(dsi);
|
||||
int ret;
|
||||
|
||||
ret = sw43408_unprepare(&ctx->base);
|
||||
if (ret < 0)
|
||||
dev_err(&dsi->dev, "failed to unprepare panel: %d\n", ret);
|
||||
|
||||
ret = mipi_dsi_detach(dsi);
|
||||
if (ret < 0)
|
||||
dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret);
|
||||
|
||||
drm_panel_remove(&ctx->base);
|
||||
}
|
||||
|
||||
static struct mipi_dsi_driver sw43408_driver = {
|
||||
.driver = {
|
||||
.name = "panel-lg-sw43408",
|
||||
.of_match_table = sw43408_of_match,
|
||||
},
|
||||
.probe = sw43408_probe,
|
||||
.remove = sw43408_remove,
|
||||
};
|
||||
module_mipi_dsi_driver(sw43408_driver);
|
||||
|
||||
MODULE_AUTHOR("Sumit Semwal <sumit.semwal@linaro.org>");
|
||||
MODULE_DESCRIPTION("LG SW436408 MIPI-DSI LED panel");
|
||||
MODULE_LICENSE("GPL");
|
Loading…
Reference in New Issue
Block a user