clk: axi-clkgen: Correctly handle nocount bit in recalc_rate()

If the nocount bit is set the divider is bypassed and the settings for the
divider count should be ignored and a divider value of 1 should be assumed.
Handle this correctly in the driver recalc_rate() callback.

While the driver sets up the part so that the read back dividers values
yield the correct result the power-on reset settings of the part might not
reflect this and hence calling e.g. clk_get_rate() without prior calls to
clk_set_rate() will yield the wrong result.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This commit is contained in:
Lars-Peter Clausen 2017-09-05 11:32:40 +02:00 committed by Stephen Boyd
parent 4fbd8d194f
commit 063578dc5f

View File

@ -40,6 +40,10 @@
#define MMCM_REG_FILTER1 0x4e
#define MMCM_REG_FILTER2 0x4f
#define MMCM_CLKOUT_NOCOUNT BIT(6)
#define MMCM_CLK_DIV_NOCOUNT BIT(12)
struct axi_clkgen {
void __iomem *base;
struct clk_hw clk_hw;
@ -315,12 +319,27 @@ static unsigned long axi_clkgen_recalc_rate(struct clk_hw *clk_hw,
unsigned int reg;
unsigned long long tmp;
axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLKOUT0_2, &reg);
if (reg & MMCM_CLKOUT_NOCOUNT) {
dout = 1;
} else {
axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLKOUT0_1, &reg);
dout = (reg & 0x3f) + ((reg >> 6) & 0x3f);
}
axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLK_DIV, &reg);
if (reg & MMCM_CLK_DIV_NOCOUNT)
d = 1;
else
d = (reg & 0x3f) + ((reg >> 6) & 0x3f);
axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLK_FB2, &reg);
if (reg & MMCM_CLKOUT_NOCOUNT) {
m = 1;
} else {
axi_clkgen_mmcm_read(axi_clkgen, MMCM_REG_CLK_FB1, &reg);
m = (reg & 0x3f) + ((reg >> 6) & 0x3f);
}
if (d == 0 || dout == 0)
return 0;