From 05b01dd936b46f2c3cfbb10bc89c0ec79c745e5d Mon Sep 17 00:00:00 2001 From: Milo Kim Date: Wed, 24 Aug 2016 22:07:16 +0900 Subject: [PATCH] ARM: dts: exynos: Use 'hpd-gpios' instead of 'hpd-gpio' This patch enables getting a HPD GPIO descriptor quicker. The exynos-hdmi driver uses "hpd" for HDMI hot plug detection. static int hdmi_resources_init(struct hdmi_context *hdata) { ... hdata->hpd_gpio = devm_gpiod_get(dev, "hpd", GPIOD_IN); ... } This calls 'of_find_gpio()' and it generates the GPIO consumer ID by referring GPIO suffix. So 'hpd-gpios' is preferred on getting a GPIO descriptor. However, if the device tree uses 'hpd-gpio', then the exynos-hdmi driver always retries to get a GPIO descriptor because the first GPIO suffix is not 'gpio' but 'gpios'. So you always see the debug message below. of_get_named_gpiod_flags: can't parse 'hpd-gpios' property of node '/soc/hdmi@14530000[0]' Use the preferred property, 'hpd-gpios' instead of 'hpd-gpio'. Acked-by: Rob Herring Reviewed-by: Andrzej Hajda Cc: devicetree@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Milo Kim Signed-off-by: Krzysztof Kozlowski --- .../devicetree/bindings/display/exynos/exynos_hdmi.txt | 4 ++-- arch/arm/boot/dts/exynos4210-universal_c210.dts | 2 +- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 2 +- arch/arm/boot/dts/exynos5250-arndale.dts | 2 +- arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 +- arch/arm/boot/dts/exynos5250-snow-common.dtsi | 2 +- arch/arm/boot/dts/exynos5250-spring.dts | 2 +- arch/arm/boot/dts/exynos5420-peach-pit.dts | 2 +- arch/arm/boot/dts/exynos5420-smdk5420.dts | 2 +- arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 +- arch/arm/boot/dts/exynos5800-peach-pi.dts | 2 +- 11 files changed, 12 insertions(+), 12 deletions(-) diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt index a2ec4c1c9382..6394ea9e3b9e 100644 --- a/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt +++ b/Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt @@ -9,7 +9,7 @@ Required properties: - reg: physical base address of the hdmi and length of memory mapped region. - interrupts: interrupt number to the cpu. -- hpd-gpio: following information about the hotplug gpio pin. +- hpd-gpios: following information about the hotplug gpio pin. a) phandle of the gpio controller node. b) pin number within the gpio controller. c) optional flags and pull up/down. @@ -56,7 +56,7 @@ Example: compatible = "samsung,exynos4212-hdmi"; reg = <0x14530000 0x100000>; interrupts = <0 95 0>; - hpd-gpio = <&gpx3 7 1>; + hpd-gpios = <&gpx3 7 1>; ddc = <&hdmi_ddc_node>; phy = <&hdmi_phy_node>; samsung,syscon-phandle = <&pmu_system_controller>; diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 9a75e3effbc9..cf95202fa310 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -269,7 +269,7 @@ }; &hdmi { - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd>; hdmi-en-supply = <&hdmi_en>; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 58ad48e7b8f7..be644fe6a0fd 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -227,7 +227,7 @@ }; &hdmi { - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd>; vdd-supply = <&ldo8_reg>; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index ea70603f660d..3d981f32874d 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -152,7 +152,7 @@ }; &hdmi { - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_LOW>; vdd_osc-supply = <&ldo10_reg>; vdd_pll-supply = <&ldo8_reg>; vdd-supply = <&ldo8_reg>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 381af134c4c8..7f27263728a1 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -116,7 +116,7 @@ }; &hdmi { - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; }; &i2c_0 { diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi index fadbea744e1a..1055d25c0ccc 100644 --- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -260,7 +260,7 @@ }; &hdmi { - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; phy = <&hdmiphy>; diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts index 44f4292bfef6..1d52a79b2f18 100644 --- a/arch/arm/boot/dts/exynos5250-spring.dts +++ b/arch/arm/boot/dts/exynos5250-spring.dts @@ -91,7 +91,7 @@ }; &hdmi { - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; phy = <&hdmiphy>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index fe4e0915c0c6..f6f256fd9b5e 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -179,7 +179,7 @@ &hdmi { status = "okay"; - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; ddc = <&i2c_2>; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index ed8f3426911b..29546465d3da 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -130,7 +130,7 @@ &hdmi { status = "okay"; - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index d04490d40b07..7bb8a370072a 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -250,7 +250,7 @@ &hdmi { status = "okay"; - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 5ec71e2400fd..51a8bca4691c 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -179,7 +179,7 @@ &hdmi { status = "okay"; - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; ddc = <&i2c_2>;