rt2800: add chipset revision RT5390R support

About 70% of the chips with revision RT5390R initialize incorrectly, using
the auxiliary antenna instead of the main one. The net result is that
signal reception is very poor (no AP further than 1M).

This chipset differs from RT5390 and RT5390F by its support of hardware
antenna diversity. Therefore antenna selection should be done
differently, by disabling software features and previously selected
antenna.

This changeset does just that, and makes all RT5390R work properly.

This is based on Ralink's 2012_03_22_RT5572_Linux_STA_v2.6.0.0_DPO
driver.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Anisse Astier 2012-04-23 12:33:11 +02:00 committed by John W. Linville
parent 218d2e26dc
commit 0586a11b5c
2 changed files with 13 additions and 0 deletions

View File

@ -83,6 +83,7 @@
#define REV_RT3090E 0x0211
#define REV_RT3390E 0x0211
#define REV_RT5390F 0x0502
#define REV_RT5390R 0x1502
/*
* Signal information.

View File

@ -3356,6 +3356,13 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
rt2800_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
}
/* This chip has hardware antenna diversity*/
if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390R)) {
rt2800_bbp_write(rt2x00dev, 150, 0); /* Disable Antenna Software OFDM */
rt2800_bbp_write(rt2x00dev, 151, 0); /* Disable Antenna Software CCK */
rt2800_bbp_write(rt2x00dev, 154, 0); /* Clear previously selected antenna */
}
rt2800_bbp_read(rt2x00dev, 152, &value);
if (ant == 0)
rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 1);
@ -4291,6 +4298,11 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
rt2x00dev->default_ant.rx = ANTENNA_A;
}
if (rt2x00_rt_rev_gte(rt2x00dev, RT5390, REV_RT5390R)) {
rt2x00dev->default_ant.tx = ANTENNA_HW_DIVERSITY; /* Unused */
rt2x00dev->default_ant.rx = ANTENNA_HW_DIVERSITY; /* Unused */
}
/*
* Determine external LNA informations.
*/