crypto: jitter - add RCT/APT support for different OSRs

The oversampling rate (OSR) value specifies the heuristically implied
entropy in the recorded data - H_submitter = 1/osr. A different entropy
estimate implies a different APT/RCT cutoff value. This change adds
support for OSRs 1 through 15. This OSR can be selected by the caller
of the Jitter RNG.

For this patch, the caller still uses one hard-coded OSR. A subsequent
patch allows this value to be configured.

In addition, the power-up self test is adjusted as follows:

* It allows the caller to provide an oversampling rate that should be
tested with - commonly it should be the same as used for the actual
runtime operation. This makes the power-up testing therefore consistent
with the runtime operation.

* It calls now jent_measure_jitter (i.e. collects the full entropy
that can possibly be harvested by the Jitter RNG) instead of only
jent_condition_data (which only returns the entropy harvested from
the conditioning component). This should now alleviate reports where
the Jitter RNG initialization thinks there is too little entropy.

* The power-up test now solely relies on the (enhanced) APT and RCT
test that is used as a health test at runtime.

The code allowing the different OSRs as well as the power-up test
changes are present in the user space version of the Jitter RNG 3.4.1
and thus was already in production use for some time.

Reported-by "Ospan, Abylay" <aospan@amazon.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This commit is contained in:
Stephan Müller 2023-09-21 13:48:11 +02:00 committed by Herbert Xu
parent 7b8c6aee0d
commit 04597c8dd6
3 changed files with 122 additions and 116 deletions

View File

@ -245,7 +245,7 @@ static int jent_kcapi_init(struct crypto_tfm *tfm)
crypto_shash_init(sdesc);
rng->sdesc = sdesc;
rng->entropy_collector = jent_entropy_collector_alloc(1, 0, sdesc);
rng->entropy_collector = jent_entropy_collector_alloc(0, 0, sdesc);
if (!rng->entropy_collector) {
ret = -ENOMEM;
goto err;
@ -334,7 +334,7 @@ static int __init jent_mod_init(void)
desc->tfm = tfm;
crypto_shash_init(desc);
ret = jent_entropy_init(desc);
ret = jent_entropy_init(0, 0, desc);
shash_desc_zero(desc);
crypto_free_shash(tfm);
if (ret) {

View File

@ -72,6 +72,8 @@ struct rand_data {
__u64 prev_time; /* SENSITIVE Previous time stamp */
__u64 last_delta; /* SENSITIVE stuck test */
__s64 last_delta2; /* SENSITIVE stuck test */
unsigned int flags; /* Flags used to initialize */
unsigned int osr; /* Oversample rate */
#define JENT_MEMORY_BLOCKS 64
#define JENT_MEMORY_BLOCKSIZE 32
@ -88,16 +90,9 @@ struct rand_data {
/* Repetition Count Test */
unsigned int rct_count; /* Number of stuck values */
/* Intermittent health test failure threshold of 2^-30 */
/* From an SP800-90B perspective, this RCT cutoff value is equal to 31. */
/* However, our RCT implementation starts at 1, so we subtract 1 here. */
#define JENT_RCT_CUTOFF (31 - 1) /* Taken from SP800-90B sec 4.4.1 */
#define JENT_APT_CUTOFF 325 /* Taken from SP800-90B sec 4.4.2 */
/* Permanent health test failure threshold of 2^-60 */
/* From an SP800-90B perspective, this RCT cutoff value is equal to 61. */
/* However, our RCT implementation starts at 1, so we subtract 1 here. */
#define JENT_RCT_CUTOFF_PERMANENT (61 - 1)
#define JENT_APT_CUTOFF_PERMANENT 355
/* Adaptive Proportion Test cutoff values */
unsigned int apt_cutoff; /* Intermittent health test failure */
unsigned int apt_cutoff_permanent; /* Permanent health test failure */
#define JENT_APT_WINDOW_SIZE 512 /* Data window size */
/* LSB of time stamp to process */
#define JENT_APT_LSB 16
@ -122,6 +117,9 @@ struct rand_data {
* zero). */
#define JENT_ESTUCK 8 /* Too many stuck results during init. */
#define JENT_EHEALTH 9 /* Health test failed during initialization */
#define JENT_ERCT 10 /* RCT failed during initialization */
#define JENT_EHASH 11 /* Hash self test failed */
#define JENT_EMEM 12 /* Can't allocate memory for initialization */
/*
* The output n bits can receive more than n bits of min entropy, of course,
@ -147,6 +145,48 @@ struct rand_data {
* This test complies with SP800-90B section 4.4.2.
***************************************************************************/
/*
* See the SP 800-90B comment #10b for the corrected cutoff for the SP 800-90B
* APT.
* http://www.untruth.org/~josh/sp80090b/UL%20SP800-90B-final%20comments%20v1.9%2020191212.pdf
* In in the syntax of R, this is C = 2 + qbinom(1 2^(30), 511, 2^(-1/osr)).
* (The original formula wasn't correct because the first symbol must
* necessarily have been observed, so there is no chance of observing 0 of these
* symbols.)
*
* For the alpha < 2^-53, R cannot be used as it uses a float data type without
* arbitrary precision. A SageMath script is used to calculate those cutoff
* values.
*
* For any value above 14, this yields the maximal allowable value of 512
* (by FIPS 140-2 IG 7.19 Resolution # 16, we cannot choose a cutoff value that
* renders the test unable to fail).
*/
static const unsigned int jent_apt_cutoff_lookup[15] = {
325, 422, 459, 477, 488, 494, 499, 502,
505, 507, 508, 509, 510, 511, 512 };
static const unsigned int jent_apt_cutoff_permanent_lookup[15] = {
355, 447, 479, 494, 502, 507, 510, 512,
512, 512, 512, 512, 512, 512, 512 };
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
static void jent_apt_init(struct rand_data *ec, unsigned int osr)
{
/*
* Establish the apt_cutoff based on the presumed entropy rate of
* 1/osr.
*/
if (osr >= ARRAY_SIZE(jent_apt_cutoff_lookup)) {
ec->apt_cutoff = jent_apt_cutoff_lookup[
ARRAY_SIZE(jent_apt_cutoff_lookup) - 1];
ec->apt_cutoff_permanent = jent_apt_cutoff_permanent_lookup[
ARRAY_SIZE(jent_apt_cutoff_permanent_lookup) - 1];
} else {
ec->apt_cutoff = jent_apt_cutoff_lookup[osr - 1];
ec->apt_cutoff_permanent =
jent_apt_cutoff_permanent_lookup[osr - 1];
}
}
/*
* Reset the APT counter
*
@ -187,12 +227,12 @@ static void jent_apt_insert(struct rand_data *ec, unsigned int delta_masked)
/* APT health test failure detection */
static int jent_apt_permanent_failure(struct rand_data *ec)
{
return (ec->apt_count >= JENT_APT_CUTOFF_PERMANENT) ? 1 : 0;
return (ec->apt_count >= ec->apt_cutoff_permanent) ? 1 : 0;
}
static int jent_apt_failure(struct rand_data *ec)
{
return (ec->apt_count >= JENT_APT_CUTOFF) ? 1 : 0;
return (ec->apt_count >= ec->apt_cutoff) ? 1 : 0;
}
/***************************************************************************
@ -275,15 +315,28 @@ static int jent_stuck(struct rand_data *ec, __u64 current_delta)
return 0;
}
/* RCT health test failure detection */
/*
* The cutoff value is based on the following consideration:
* alpha = 2^-30 or 2^-60 as recommended in SP800-90B.
* In addition, we require an entropy value H of 1/osr as this is the minimum
* entropy required to provide full entropy.
* Note, we collect (DATA_SIZE_BITS + ENTROPY_SAFETY_FACTOR)*osr deltas for
* inserting them into the entropy pool which should then have (close to)
* DATA_SIZE_BITS bits of entropy in the conditioned output.
*
* Note, ec->rct_count (which equals to value B in the pseudo code of SP800-90B
* section 4.4.1) starts with zero. Hence we need to subtract one from the
* cutoff value as calculated following SP800-90B. Thus
* C = ceil(-log_2(alpha)/H) = 30*osr or 60*osr.
*/
static int jent_rct_permanent_failure(struct rand_data *ec)
{
return (ec->rct_count >= JENT_RCT_CUTOFF_PERMANENT) ? 1 : 0;
return (ec->rct_count >= (60 * ec->osr)) ? 1 : 0;
}
static int jent_rct_failure(struct rand_data *ec)
{
return (ec->rct_count >= JENT_RCT_CUTOFF) ? 1 : 0;
return (ec->rct_count >= (30 * ec->osr)) ? 1 : 0;
}
/* Report of health test failures */
@ -448,7 +501,7 @@ static void jent_memaccess(struct rand_data *ec, __u64 loop_cnt)
*
* @return result of stuck test
*/
static int jent_measure_jitter(struct rand_data *ec)
static int jent_measure_jitter(struct rand_data *ec, __u64 *ret_current_delta)
{
__u64 time = 0;
__u64 current_delta = 0;
@ -472,6 +525,10 @@ static int jent_measure_jitter(struct rand_data *ec)
if (jent_condition_data(ec, current_delta, stuck))
stuck = 1;
/* return the raw entropy value */
if (ret_current_delta)
*ret_current_delta = current_delta;
return stuck;
}
@ -489,11 +546,11 @@ static void jent_gen_entropy(struct rand_data *ec)
safety_factor = JENT_ENTROPY_SAFETY_FACTOR;
/* priming of the ->prev_time value */
jent_measure_jitter(ec);
jent_measure_jitter(ec, NULL);
while (!jent_health_failure(ec)) {
/* If a stuck measurement is received, repeat measurement */
if (jent_measure_jitter(ec))
if (jent_measure_jitter(ec, NULL))
continue;
/*
@ -554,7 +611,8 @@ int jent_read_entropy(struct rand_data *ec, unsigned char *data,
* Perform startup health tests and return permanent
* error if it fails.
*/
if (jent_entropy_init(ec->hash_state))
if (jent_entropy_init(ec->osr, ec->flags,
ec->hash_state))
return -3;
return -2;
@ -604,11 +662,15 @@ struct rand_data *jent_entropy_collector_alloc(unsigned int osr,
/* verify and set the oversampling rate */
if (osr == 0)
osr = 1; /* minimum sampling rate is 1 */
osr = 1; /* H_submitter = 1 / osr */
entropy_collector->osr = osr;
entropy_collector->flags = flags;
entropy_collector->hash_state = hash_state;
/* Initialize the APT */
jent_apt_init(entropy_collector, osr);
/* fill the data pad with non-zero values */
jent_gen_entropy(entropy_collector);
@ -622,20 +684,14 @@ void jent_entropy_collector_free(struct rand_data *entropy_collector)
jent_zfree(entropy_collector);
}
int jent_entropy_init(void *hash_state)
int jent_entropy_init(unsigned int osr, unsigned int flags, void *hash_state)
{
int i;
__u64 delta_sum = 0;
__u64 old_delta = 0;
unsigned int nonstuck = 0;
int time_backwards = 0;
int count_mod = 0;
int count_stuck = 0;
struct rand_data ec = { 0 };
struct rand_data *ec;
int i, time_backwards = 0, ret = 0;
/* Required for RCT */
ec.osr = 1;
ec.hash_state = hash_state;
ec = jent_entropy_collector_alloc(osr, flags, hash_state);
if (!ec)
return JENT_EMEM;
/* We could perform statistical tests here, but the problem is
* that we only have a few loop counts to do testing. These
@ -664,31 +720,28 @@ int jent_entropy_init(void *hash_state)
#define TESTLOOPCOUNT 1024
#define CLEARCACHE 100
for (i = 0; (TESTLOOPCOUNT + CLEARCACHE) > i; i++) {
__u64 time = 0;
__u64 time2 = 0;
__u64 delta = 0;
unsigned int lowdelta = 0;
int stuck;
__u64 start_time = 0, end_time = 0, delta = 0;
/* Invoke core entropy collection logic */
jent_get_nstime(&time);
ec.prev_time = time;
jent_condition_data(&ec, time, 0);
jent_get_nstime(&time2);
jent_measure_jitter(ec, &delta);
end_time = ec->prev_time;
start_time = ec->prev_time - delta;
/* test whether timer works */
if (!time || !time2)
return JENT_ENOTIME;
delta = jent_delta(time, time2);
if (!start_time || !end_time) {
ret = JENT_ENOTIME;
goto out;
}
/*
* test whether timer is fine grained enough to provide
* delta even when called shortly after each other -- this
* implies that we also have a high resolution timer
*/
if (!delta)
return JENT_ECOARSETIME;
stuck = jent_stuck(&ec, delta);
if (!delta || (end_time == start_time)) {
ret = JENT_ECOARSETIME;
goto out;
}
/*
* up to here we did not modify any variable that will be
@ -700,49 +753,9 @@ int jent_entropy_init(void *hash_state)
if (i < CLEARCACHE)
continue;
if (stuck)
count_stuck++;
else {
nonstuck++;
/*
* Ensure that the APT succeeded.
*
* With the check below that count_stuck must be less
* than 10% of the overall generated raw entropy values
* it is guaranteed that the APT is invoked at
* floor((TESTLOOPCOUNT * 0.9) / 64) == 14 times.
*/
if ((nonstuck % JENT_APT_WINDOW_SIZE) == 0) {
jent_apt_reset(&ec,
delta & JENT_APT_WORD_MASK);
}
}
/* Validate health test result */
if (jent_health_failure(&ec))
return JENT_EHEALTH;
/* test whether we have an increasing timer */
if (!(time2 > time))
if (!(end_time > start_time))
time_backwards++;
/* use 32 bit value to ensure compilation on 32 bit arches */
lowdelta = time2 - time;
if (!(lowdelta % 100))
count_mod++;
/*
* ensure that we have a varying delta timer which is necessary
* for the calculation of entropy -- perform this check
* only after the first loop is executed as we need to prime
* the old_data value
*/
if (delta > old_delta)
delta_sum += (delta - old_delta);
else
delta_sum += (old_delta - delta);
old_delta = delta;
}
/*
@ -752,31 +765,23 @@ int jent_entropy_init(void *hash_state)
* should not fail. The value of 3 should cover the NTP case being
* performed during our test run.
*/
if (time_backwards > 3)
return JENT_ENOMONOTONIC;
if (time_backwards > 3) {
ret = JENT_ENOMONOTONIC;
goto out;
}
/*
* Variations of deltas of time must on average be larger
* than 1 to ensure the entropy estimation
* implied with 1 is preserved
*/
if ((delta_sum) <= 1)
return JENT_EVARVAR;
/* Did we encounter a health test failure? */
if (jent_rct_failure(ec)) {
ret = JENT_ERCT;
goto out;
}
if (jent_apt_failure(ec)) {
ret = JENT_EHEALTH;
goto out;
}
/*
* Ensure that we have variations in the time stamp below 10 for at
* least 10% of all checks -- on some platforms, the counter increments
* in multiples of 100, but not always
*/
if ((TESTLOOPCOUNT/10 * 9) < count_mod)
return JENT_ECOARSETIME;
out:
jent_entropy_collector_free(ec);
/*
* If we have more than 90% stuck results, then this Jitter RNG is
* likely to not work well.
*/
if ((TESTLOOPCOUNT/10 * 9) < count_stuck)
return JENT_ESTUCK;
return 0;
return ret;
}

View File

@ -9,7 +9,8 @@ extern int jent_hash_time(void *hash_state, __u64 time, u8 *addtl,
int jent_read_random_block(void *hash_state, char *dst, unsigned int dst_len);
struct rand_data;
extern int jent_entropy_init(void *hash_state);
extern int jent_entropy_init(unsigned int osr, unsigned int flags,
void *hash_state);
extern int jent_read_entropy(struct rand_data *ec, unsigned char *data,
unsigned int len);