Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:

 - UEFI boot and runtime services support for ARM from Ard Biesheuvel
   and Roy Franz.

 - DT compatibility with old atags booting protocol for Nokia N900
   devices from Ivaylo Dimitrov.

 - PSCI firmware interface using new arm-smc calling convention from
   Jens Wiklander.

 - Runtime patching for udiv/sdiv instructions for ARMv7 CPUs that
   support these instructions from Nicolas Pitre.

 - L2x0 cache updates from Dirk B and Linus Walleij.

 - Randconfig fixes from Arnd Bergmann.

 - ARMv7M (nommu) updates from Ezequiel Garcia

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (34 commits)
  ARM: 8481/2: drivers: psci: replace psci firmware calls
  ARM: 8480/2: arm64: add implementation for arm-smccc
  ARM: 8479/2: add implementation for arm-smccc
  ARM: 8478/2: arm/arm64: add arm-smccc
  ARM: 8494/1: mm: Enable PXN when running non-LPAE kernel on LPAE processor
  ARM: 8496/1: OMAP: RX51: save ATAGS data in the early boot stage
  ARM: 8495/1: ATAGS: move save_atags() to arch/arm/include/asm/setup.h
  ARM: 8452/3: PJ4: make coprocessor access sequences buildable in Thumb2 mode
  ARM: 8482/1: l2x0: make it possible to disable outer sync from DT
  ARM: 8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI
  ARM: 8487/1: Remove IPI_CALL_FUNC_SINGLE
  ARM: 8485/1: cpuidle: remove cpu parameter from the cpuidle_ops suspend hook
  ARM: 8484/1: Documentation: l2c2x0: Mention separate controllers explicitly
  ARM: 8483/1: Documentation: l2c: Rename l2cc to l2c2x0
  ARM: 8477/1: runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()
  ARM: 8476/1: VDSO: use PTR_ERR_OR_ZERO for vma check
  ARM: 8453/2: proc-v7.S: don't locate temporary stack space in .text section
  ARM: add UEFI stub support
  ARM: wire up UEFI init and runtime support
  ARM: only consider memblocks with NOMAP cleared for linear mapping
  ...
This commit is contained in:
Linus Torvalds 2016-01-12 12:39:07 -08:00
commit 01e9d22638
51 changed files with 1036 additions and 191 deletions

View File

@ -1,7 +1,8 @@
* ARM L2 Cache Controller
ARM cores often have a separate level 2 cache controller. There are various
implementations of the L2 cache controller with compatible programming models.
ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/PL220/
PL310 and variants) based level 2 cache controller. All these various implementations
of the L2 cache controller have compatible programming models (Note 1).
Some of the properties that are just prefixed "cache-*" are taken from section
3.7.3 of the ePAPR v1.1 specification which can be found at:
https://www.power.org/wp-content/uploads/2012/06/Power_ePAPR_APPROVED_v1.1.pdf
@ -67,12 +68,17 @@ Optional properties:
disable if zero.
- arm,prefetch-offset : Override prefetch offset value. Valid values are
0-7, 15, 23, and 31.
- arm,shared-override : The default behavior of the pl310 cache controller with
respect to the shareable attribute is to transform "normal memory
non-cacheable transactions" into "cacheable no allocate" (for reads) or
"write through no write allocate" (for writes).
- arm,shared-override : The default behavior of the L220 or PL310 cache
controllers with respect to the shareable attribute is to transform "normal
memory non-cacheable transactions" into "cacheable no allocate" (for reads)
or "write through no write allocate" (for writes).
On systems where this may cause DMA buffer corruption, this property must be
specified to indicate that such transforms are precluded.
- arm,parity-enable : enable parity checking on the L2 cache (L220 or PL310).
- arm,parity-disable : disable parity checking on the L2 cache (L220 or PL310).
- arm,outer-sync-disable : disable the outer sync operation on the L2 cache.
Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that
will randomly hang unless outer sync operations are disabled.
- prefetch-data : Data prefetch. Value: <0> (forcibly disable), <1>
(forcibly enable), property absent (retain settings set by firmware)
- prefetch-instr : Instruction prefetch. Value: <0> (forcibly disable),
@ -91,3 +97,9 @@ L2: cache-controller {
cache-level = <2>;
interrupts = <45>;
};
Note 1: The description in this document doesn't apply to integrated L2
cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These
integrated L2 controllers are assumed to be all preconfigured by
early secure boot code. Thus no need to deal with their configuration
in the kernel at all.

View File

@ -20,6 +20,7 @@ config ARM
select GENERIC_ALLOCATOR
select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI)
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
select GENERIC_EARLY_IOREMAP
select GENERIC_IDLE_POLL_SETUP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
@ -33,10 +34,11 @@ config ARM
select HARDIRQS_SW_RESEND
select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32
select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32
select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
select HAVE_ARCH_TRACEHOOK
select HAVE_ARM_SMCCC if CPU_V7
select HAVE_BPF_JIT
select HAVE_CC_STACKPROTECTOR
select HAVE_CONTEXT_TRACKING
@ -45,7 +47,7 @@ config ARM
select HAVE_DMA_API_DEBUG
select HAVE_DMA_ATTRS
select HAVE_DMA_CONTIGUOUS if MMU
select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32
select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32 && MMU
select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
@ -802,6 +804,7 @@ config ARCH_VIRT
bool "Dummy Virtual Machine" if ARCH_MULTI_V7
select ARM_AMBA
select ARM_GIC
select ARM_GIC_V2M if PCI_MSI
select ARM_GIC_V3
select ARM_PSCI
select HAVE_ARM_ARCH_TIMER
@ -1425,7 +1428,7 @@ config BIG_LITTLE
config BL_SWITCHER
bool "big.LITTLE switcher support"
depends on BIG_LITTLE && MCPM && HOTPLUG_CPU
depends on BIG_LITTLE && MCPM && HOTPLUG_CPU && ARM_GIC
select ARM_CPU_SUSPEND
select CPU_PM
help
@ -1484,7 +1487,7 @@ config HOTPLUG_CPU
config ARM_PSCI
bool "Support for the ARM Power State Coordination Interface (PSCI)"
depends on CPU_V7
depends on HAVE_ARM_SMCCC
select ARM_PSCI_FW
help
Say Y here if you want Linux to communicate with system firmware
@ -1607,6 +1610,24 @@ config THUMB2_AVOID_R_ARM_THM_JUMP11
config ARM_ASM_UNIFIED
bool
config ARM_PATCH_IDIV
bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()"
depends on CPU_32v7 && !XIP_KERNEL
default y
help
The ARM compiler inserts calls to __aeabi_idiv() and
__aeabi_uidiv() when it needs to perform division on signed
and unsigned integers. Some v7 CPUs have support for the sdiv
and udiv instructions that can be used to implement those
functions.
Enabling this option allows the kernel to modify itself to
replace the first two instructions of these library functions
with the sdiv or udiv plus "bx lr" instructions when the CPU
it is running on supports them. Typically this will be faster
and less power intensive than running the original library
code to do integer division.
config AEABI
bool "Use the ARM EABI to compile the kernel"
help
@ -2043,6 +2064,25 @@ config AUTO_ZRELADDR
0xf8000000. This assumes the zImage being placed in the first 128MB
from start of memory.
config EFI_STUB
bool
config EFI
bool "UEFI runtime support"
depends on OF && !CPU_BIG_ENDIAN && MMU && AUTO_ZRELADDR && !XIP_KERNEL
select UCS2_STRING
select EFI_PARAMS_FROM_FDT
select EFI_STUB
select EFI_ARMSTUB
select EFI_RUNTIME_WRAPPERS
---help---
This option provides support for runtime services provided
by UEFI firmware (such as non-volatile variables, realtime
clock, and platform reset). A UEFI stub is also provided to
allow the kernel to be booted as an EFI application. This
is only useful for kernels that may run on systems that have
UEFI firmware.
endmenu
menu "CPU Power Management"

View File

@ -167,9 +167,11 @@ if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \
false; \
fi
efi-obj-$(CONFIG_EFI_STUB) := $(objtree)/drivers/firmware/efi/libstub/lib.a
$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \
$(bswapsdi2) FORCE
$(bswapsdi2) $(efi-obj-y) FORCE
@$(check_for_multiple_zreladdr)
$(call if_changed,ld)
@$(check_for_bad_syms)

View File

@ -0,0 +1,130 @@
/*
* Copyright (C) 2013-2015 Linaro Ltd
* Authors: Roy Franz <roy.franz@linaro.org>
* Ard Biesheuvel <ard.biesheuvel@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
.macro __nop
#ifdef CONFIG_EFI_STUB
@ This is almost but not quite a NOP, since it does clobber the
@ condition flags. But it is the best we can do for EFI, since
@ PE/COFF expects the magic string "MZ" at offset 0, while the
@ ARM/Linux boot protocol expects an executable instruction
@ there.
.inst 'M' | ('Z' << 8) | (0x1310 << 16) @ tstne r0, #0x4d000
#else
mov r0, r0
#endif
.endm
.macro __EFI_HEADER
#ifdef CONFIG_EFI_STUB
b __efi_start
.set start_offset, __efi_start - start
.org start + 0x3c
@
@ The PE header can be anywhere in the file, but for
@ simplicity we keep it together with the MSDOS header
@ The offset to the PE/COFF header needs to be at offset
@ 0x3C in the MSDOS header.
@ The only 2 fields of the MSDOS header that are used are this
@ PE/COFF offset, and the "MZ" bytes at offset 0x0.
@
.long pe_header - start @ Offset to the PE header.
pe_header:
.ascii "PE\0\0"
coff_header:
.short 0x01c2 @ ARM or Thumb
.short 2 @ nr_sections
.long 0 @ TimeDateStamp
.long 0 @ PointerToSymbolTable
.long 1 @ NumberOfSymbols
.short section_table - optional_header
@ SizeOfOptionalHeader
.short 0x306 @ Characteristics.
@ IMAGE_FILE_32BIT_MACHINE |
@ IMAGE_FILE_DEBUG_STRIPPED |
@ IMAGE_FILE_EXECUTABLE_IMAGE |
@ IMAGE_FILE_LINE_NUMS_STRIPPED
optional_header:
.short 0x10b @ PE32 format
.byte 0x02 @ MajorLinkerVersion
.byte 0x14 @ MinorLinkerVersion
.long _end - __efi_start @ SizeOfCode
.long 0 @ SizeOfInitializedData
.long 0 @ SizeOfUninitializedData
.long efi_stub_entry - start @ AddressOfEntryPoint
.long start_offset @ BaseOfCode
.long 0 @ data
extra_header_fields:
.long 0 @ ImageBase
.long 0x200 @ SectionAlignment
.long 0x200 @ FileAlignment
.short 0 @ MajorOperatingSystemVersion
.short 0 @ MinorOperatingSystemVersion
.short 0 @ MajorImageVersion
.short 0 @ MinorImageVersion
.short 0 @ MajorSubsystemVersion
.short 0 @ MinorSubsystemVersion
.long 0 @ Win32VersionValue
.long _end - start @ SizeOfImage
.long start_offset @ SizeOfHeaders
.long 0 @ CheckSum
.short 0xa @ Subsystem (EFI application)
.short 0 @ DllCharacteristics
.long 0 @ SizeOfStackReserve
.long 0 @ SizeOfStackCommit
.long 0 @ SizeOfHeapReserve
.long 0 @ SizeOfHeapCommit
.long 0 @ LoaderFlags
.long 0x6 @ NumberOfRvaAndSizes
.quad 0 @ ExportTable
.quad 0 @ ImportTable
.quad 0 @ ResourceTable
.quad 0 @ ExceptionTable
.quad 0 @ CertificationTable
.quad 0 @ BaseRelocationTable
section_table:
@
@ The EFI application loader requires a relocation section
@ because EFI applications must be relocatable. This is a
@ dummy section as far as we are concerned.
@
.ascii ".reloc\0\0"
.long 0 @ VirtualSize
.long 0 @ VirtualAddress
.long 0 @ SizeOfRawData
.long 0 @ PointerToRawData
.long 0 @ PointerToRelocations
.long 0 @ PointerToLineNumbers
.short 0 @ NumberOfRelocations
.short 0 @ NumberOfLineNumbers
.long 0x42100040 @ Characteristics
.ascii ".text\0\0\0"
.long _end - __efi_start @ VirtualSize
.long __efi_start @ VirtualAddress
.long _edata - __efi_start @ SizeOfRawData
.long __efi_start @ PointerToRawData
.long 0 @ PointerToRelocations
.long 0 @ PointerToLineNumbers
.short 0 @ NumberOfRelocations
.short 0 @ NumberOfLineNumbers
.long 0xe0500020 @ Characteristics
.align 9
__efi_start:
#endif
.endm

View File

@ -12,6 +12,8 @@
#include <asm/assembler.h>
#include <asm/v7m.h>
#include "efi-header.S"
AR_CLASS( .arch armv7-a )
M_CLASS( .arch armv7-m )
@ -126,7 +128,7 @@
start:
.type start,#function
.rept 7
mov r0, r0
__nop
.endr
ARM( mov r0, r0 )
ARM( b 1f )
@ -139,7 +141,8 @@ start:
.word 0x04030201 @ endianness flag
THUMB( .thumb )
1:
1: __EFI_HEADER
ARM_BE8( setend be ) @ go BE8 if compiled for BE8
AR_CLASS( mrs r9, cpsr )
#ifdef CONFIG_ARM_VIRT_EXT
@ -1353,6 +1356,53 @@ __enter_kernel:
reloc_code_end:
#ifdef CONFIG_EFI_STUB
.align 2
_start: .long start - .
ENTRY(efi_stub_entry)
@ allocate space on stack for passing current zImage address
@ and for the EFI stub to return of new entry point of
@ zImage, as EFI stub may copy the kernel. Pointer address
@ is passed in r2. r0 and r1 are passed through from the
@ EFI firmware to efi_entry
adr ip, _start
ldr r3, [ip]
add r3, r3, ip
stmfd sp!, {r3, lr}
mov r2, sp @ pass zImage address in r2
bl efi_entry
@ Check for error return from EFI stub. r0 has FDT address
@ or error code.
cmn r0, #1
beq efi_load_fail
@ Preserve return value of efi_entry() in r4
mov r4, r0
bl cache_clean_flush
bl cache_off
@ Set parameters for booting zImage according to boot protocol
@ put FDT address in r2, it was returned by efi_entry()
@ r1 is the machine type, and r0 needs to be 0
mov r0, #0
mov r1, #0xFFFFFFFF
mov r2, r4
@ Branch to (possibly) relocated zImage that is in [sp]
ldr lr, [sp]
ldr ip, =start_offset
add lr, lr, ip
mov pc, lr @ no mode switch
efi_load_fail:
@ Return EFI_LOAD_ERROR to EFI firmware on error.
ldr r0, =0x80000001
ldmfd sp!, {ip, pc}
ENDPROC(efi_stub_entry)
#endif
.align
.section ".stack", "aw", %nobits
.L_user_stack: .space 4096

View File

@ -48,6 +48,13 @@ SECTIONS
*(.rodata)
*(.rodata.*)
}
.data : {
/*
* The EFI stub always executes from RAM, and runs strictly before the
* decompressor, so we can make an exception for its r/w data, and keep it
*/
*(.data.efistub)
}
.piggydata : {
*(.piggydata)
}

View File

@ -3,6 +3,7 @@
generic-y += bitsperlong.h
generic-y += cputime.h
generic-y += current.h
generic-y += early_ioremap.h
generic-y += emergency-restart.h
generic-y += errno.h
generic-y += exec.h

View File

@ -5,8 +5,6 @@
#include <linux/types.h>
#include <asm/opcodes.h>
#ifdef CONFIG_BUG
/*
* Use a suitable undefined instruction to use for ARM/Thumb2 bug handling.
* We need to be careful not to conflict with those used by other modules and
@ -47,7 +45,7 @@ do { \
unreachable(); \
} while (0)
#else /* not CONFIG_DEBUG_BUGVERBOSE */
#else
#define __BUG(__file, __line, __value) \
do { \
@ -57,7 +55,6 @@ do { \
#endif /* CONFIG_DEBUG_BUGVERBOSE */
#define HAVE_ARCH_BUG
#endif /* CONFIG_BUG */
#include <asm-generic/bug.h>

View File

@ -30,7 +30,7 @@ static inline int arm_cpuidle_simple_enter(struct cpuidle_device *dev,
struct device_node;
struct cpuidle_ops {
int (*suspend)(int cpu, unsigned long arg);
int (*suspend)(unsigned long arg);
int (*init)(struct device_node *, int cpu);
};

View File

@ -0,0 +1,83 @@
/*
* Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARM_EFI_H
#define __ASM_ARM_EFI_H
#include <asm/cacheflush.h>
#include <asm/cachetype.h>
#include <asm/early_ioremap.h>
#include <asm/fixmap.h>
#include <asm/highmem.h>
#include <asm/mach/map.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
#ifdef CONFIG_EFI
void efi_init(void);
int efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md);
#define efi_call_virt(f, ...) \
({ \
efi_##f##_t *__f; \
efi_status_t __s; \
\
efi_virtmap_load(); \
__f = efi.systab->runtime->f; \
__s = __f(__VA_ARGS__); \
efi_virtmap_unload(); \
__s; \
})
#define __efi_call_virt(f, ...) \
({ \
efi_##f##_t *__f; \
\
efi_virtmap_load(); \
__f = efi.systab->runtime->f; \
__f(__VA_ARGS__); \
efi_virtmap_unload(); \
})
static inline void efi_set_pgd(struct mm_struct *mm)
{
check_and_switch_context(mm, NULL);
}
void efi_virtmap_load(void);
void efi_virtmap_unload(void);
#else
#define efi_init()
#endif /* CONFIG_EFI */
/* arch specific definitions used by the stub code */
#define efi_call_early(f, ...) sys_table_arg->boottime->f(__VA_ARGS__)
/*
* A reasonable upper bound for the uncompressed kernel size is 32 MBytes,
* so we will reserve that amount of memory. We have no easy way to tell what
* the actuall size of code + data the uncompressed kernel will use.
* If this is insufficient, the decompressor will relocate itself out of the
* way before performing the decompression.
*/
#define MAX_UNCOMP_KERNEL_SIZE SZ_32M
/*
* The kernel zImage should preferably be located between 32 MB and 128 MB
* from the base of DRAM. The min address leaves space for a maximal size
* uncompressed image, and the max address is due to how the zImage decompressor
* picks a destination address.
*/
#define ZIMAGE_OFFSET_LIMIT SZ_128M
#define MIN_ZIMAGE_OFFSET MAX_UNCOMP_KERNEL_SIZE
#define MAX_FDT_OFFSET ZIMAGE_OFFSET_LIMIT
#endif /* _ASM_ARM_EFI_H */

View File

@ -19,20 +19,47 @@ enum fixed_addresses {
FIX_TEXT_POKE0,
FIX_TEXT_POKE1,
__end_of_fixed_addresses
__end_of_fixmap_region,
/*
* Share the kmap() region with early_ioremap(): this is guaranteed
* not to clash since early_ioremap() is only available before
* paging_init(), and kmap() only after.
*/
#define NR_FIX_BTMAPS 32
#define FIX_BTMAPS_SLOTS 7
#define TOTAL_FIX_BTMAPS (NR_FIX_BTMAPS * FIX_BTMAPS_SLOTS)
FIX_BTMAP_END = __end_of_permanent_fixed_addresses,
FIX_BTMAP_BEGIN = FIX_BTMAP_END + TOTAL_FIX_BTMAPS - 1,
__end_of_early_ioremap_region
};
static const enum fixed_addresses __end_of_fixed_addresses =
__end_of_fixmap_region > __end_of_early_ioremap_region ?
__end_of_fixmap_region : __end_of_early_ioremap_region;
#define FIXMAP_PAGE_COMMON (L_PTE_YOUNG | L_PTE_PRESENT | L_PTE_XN | L_PTE_DIRTY)
#define FIXMAP_PAGE_NORMAL (FIXMAP_PAGE_COMMON | L_PTE_MT_WRITEBACK)
#define FIXMAP_PAGE_RO (FIXMAP_PAGE_NORMAL | L_PTE_RDONLY)
/* Used by set_fixmap_(io|nocache), both meant for mapping a device */
#define FIXMAP_PAGE_IO (FIXMAP_PAGE_COMMON | L_PTE_MT_DEV_SHARED | L_PTE_SHARED)
#define FIXMAP_PAGE_NOCACHE FIXMAP_PAGE_IO
#define __early_set_fixmap __set_fixmap
#ifdef CONFIG_MMU
void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot);
void __init early_fixmap_init(void);
#include <asm-generic/fixmap.h>
#else
static inline void early_fixmap_init(void) { }
#endif
#endif

View File

@ -5,7 +5,7 @@
#include <linux/threads.h>
#include <asm/irq.h>
#define NR_IPI 8
#define NR_IPI 7
typedef struct {
unsigned int __softirq_pending;

View File

@ -42,6 +42,8 @@ enum {
extern void iotable_init(struct map_desc *, int);
extern void vm_reserve_area_early(unsigned long addr, unsigned long size,
void *caller);
extern void create_mapping_late(struct mm_struct *mm, struct map_desc *md,
bool ng);
#ifdef CONFIG_DEBUG_LL
extern void debug_ll_addr(unsigned long *paddr, unsigned long *vaddr);

View File

@ -26,7 +26,7 @@ void __check_vmalloc_seq(struct mm_struct *mm);
#ifdef CONFIG_CPU_HAS_ASID
void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk);
#define init_new_context(tsk,mm) ({ atomic64_set(&mm->context.id, 0); 0; })
#define init_new_context(tsk,mm) ({ atomic64_set(&(mm)->context.id, 0); 0; })
#ifdef CONFIG_ARM_ERRATA_798181
void a15_erratum_get_cpumask(int this_cpu, struct mm_struct *mm,

View File

@ -16,7 +16,7 @@
extern struct smp_operations psci_smp_ops;
#ifdef CONFIG_ARM_PSCI
#if defined(CONFIG_SMP) && defined(CONFIG_ARM_PSCI)
bool psci_smp_available(void);
#else
static inline bool psci_smp_available(void) { return false; }

View File

@ -25,4 +25,10 @@ extern int arm_add_memory(u64 start, u64 size);
extern void early_print(const char *str, ...);
extern void dump_machine_table(void);
#ifdef CONFIG_ATAGS_PROC
extern void save_atags(const struct tag *tags);
#else
static inline void save_atags(const struct tag *tags) { }
#endif
#endif

View File

@ -73,10 +73,10 @@ obj-$(CONFIG_IWMMXT) += iwmmxt.o
obj-$(CONFIG_PERF_EVENTS) += perf_regs.o perf_callchain.o
obj-$(CONFIG_HW_PERF_EVENTS) += perf_event_xscale.o perf_event_v6.o \
perf_event_v7.o
CFLAGS_pj4-cp0.o := -marm
AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o
obj-$(CONFIG_VDSO) += vdso.o
obj-$(CONFIG_EFI) += efi.o
ifneq ($(CONFIG_ARCH_EBSA110),y)
obj-y += io.o
@ -88,8 +88,9 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_ARM_VIRT_EXT) += hyp-stub.o
ifeq ($(CONFIG_ARM_PSCI),y)
obj-y += psci-call.o
obj-$(CONFIG_SMP) += psci_smp.o
endif
obj-$(CONFIG_HAVE_ARM_SMCCC) += smccc-call.o
extra-y := $(head-y) vmlinux.lds

View File

@ -16,6 +16,7 @@
#include <linux/syscalls.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/arm-smccc.h>
#include <asm/checksum.h>
#include <asm/ftrace.h>
@ -175,3 +176,8 @@ EXPORT_SYMBOL(__gnu_mcount_nc);
EXPORT_SYMBOL(__pv_phys_pfn_offset);
EXPORT_SYMBOL(__pv_offset);
#endif
#ifdef CONFIG_HAVE_ARM_SMCCC
EXPORT_SYMBOL(arm_smccc_smc);
EXPORT_SYMBOL(arm_smccc_hvc);
#endif

View File

@ -1,9 +1,3 @@
#ifdef CONFIG_ATAGS_PROC
extern void save_atags(struct tag *tags);
#else
static inline void save_atags(struct tag *tags) { }
#endif
void convert_to_tag_list(struct tag *tags);
#ifdef CONFIG_ATAGS

View File

@ -56,7 +56,7 @@ int arm_cpuidle_suspend(int index)
int cpu = smp_processor_id();
if (cpuidle_ops[cpu].suspend)
ret = cpuidle_ops[cpu].suspend(cpu, index);
ret = cpuidle_ops[cpu].suspend(index);
return ret;
}

38
arch/arm/kernel/efi.c Normal file
View File

@ -0,0 +1,38 @@
/*
* Copyright (C) 2015 Linaro Ltd <ard.biesheuvel@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/efi.h>
#include <asm/efi.h>
#include <asm/mach/map.h>
#include <asm/mmu_context.h>
int __init efi_create_mapping(struct mm_struct *mm, efi_memory_desc_t *md)
{
struct map_desc desc = {
.virtual = md->virt_addr,
.pfn = __phys_to_pfn(md->phys_addr),
.length = md->num_pages * EFI_PAGE_SIZE,
};
/*
* Order is important here: memory regions may have all of the
* bits below set (and usually do), so we check them in order of
* preference.
*/
if (md->attribute & EFI_MEMORY_WB)
desc.type = MT_MEMORY_RWX;
else if (md->attribute & EFI_MEMORY_WT)
desc.type = MT_MEMORY_RWX_NONCACHED;
else if (md->attribute & EFI_MEMORY_WC)
desc.type = MT_DEVICE_WC;
else
desc.type = MT_DEVICE;
create_mapping_late(mm, &desc, true);
return 0;
}

View File

@ -88,7 +88,7 @@ __pendsv_entry:
@ execute the pending work, including reschedule
get_thread_info tsk
mov why, #0
b ret_to_user
b ret_to_user_from_irq
ENDPROC(__pendsv_entry)
/*

View File

@ -66,9 +66,13 @@ static void __init pj4_cp_access_write(u32 value)
__asm__ __volatile__ (
"mcr p15, 0, %1, c1, c0, 2\n\t"
#ifdef CONFIG_THUMB2_KERNEL
"isb\n\t"
#else
"mrc p15, 0, %0, c1, c0, 2\n\t"
"mov %0, %0\n\t"
"sub pc, pc, #4\n\t"
#endif
: "=r" (temp) : "r" (value));
}

View File

@ -1,31 +0,0 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Copyright (C) 2015 ARM Limited
*
* Author: Mark Rutland <mark.rutland@arm.com>
*/
#include <linux/linkage.h>
#include <asm/opcodes-sec.h>
#include <asm/opcodes-virt.h>
/* int __invoke_psci_fn_hvc(u32 function_id, u32 arg0, u32 arg1, u32 arg2) */
ENTRY(__invoke_psci_fn_hvc)
__HVC(0)
bx lr
ENDPROC(__invoke_psci_fn_hvc)
/* int __invoke_psci_fn_smc(u32 function_id, u32 arg0, u32 arg1, u32 arg2) */
ENTRY(__invoke_psci_fn_smc)
__SMC(0)
bx lr
ENDPROC(__invoke_psci_fn_smc)

View File

@ -7,6 +7,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/efi.h>
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
@ -37,7 +38,9 @@
#include <asm/cp15.h>
#include <asm/cpu.h>
#include <asm/cputype.h>
#include <asm/efi.h>
#include <asm/elf.h>
#include <asm/early_ioremap.h>
#include <asm/fixmap.h>
#include <asm/procinfo.h>
#include <asm/psci.h>
@ -375,6 +378,72 @@ void __init early_print(const char *str, ...)
printk("%s", buf);
}
#ifdef CONFIG_ARM_PATCH_IDIV
static inline u32 __attribute_const__ sdiv_instruction(void)
{
if (IS_ENABLED(CONFIG_THUMB2_KERNEL)) {
/* "sdiv r0, r0, r1" */
u32 insn = __opcode_thumb32_compose(0xfb90, 0xf0f1);
return __opcode_to_mem_thumb32(insn);
}
/* "sdiv r0, r0, r1" */
return __opcode_to_mem_arm(0xe710f110);
}
static inline u32 __attribute_const__ udiv_instruction(void)
{
if (IS_ENABLED(CONFIG_THUMB2_KERNEL)) {
/* "udiv r0, r0, r1" */
u32 insn = __opcode_thumb32_compose(0xfbb0, 0xf0f1);
return __opcode_to_mem_thumb32(insn);
}
/* "udiv r0, r0, r1" */
return __opcode_to_mem_arm(0xe730f110);
}
static inline u32 __attribute_const__ bx_lr_instruction(void)
{
if (IS_ENABLED(CONFIG_THUMB2_KERNEL)) {
/* "bx lr; nop" */
u32 insn = __opcode_thumb32_compose(0x4770, 0x46c0);
return __opcode_to_mem_thumb32(insn);
}
/* "bx lr" */
return __opcode_to_mem_arm(0xe12fff1e);
}
static void __init patch_aeabi_idiv(void)
{
extern void __aeabi_uidiv(void);
extern void __aeabi_idiv(void);
uintptr_t fn_addr;
unsigned int mask;
mask = IS_ENABLED(CONFIG_THUMB2_KERNEL) ? HWCAP_IDIVT : HWCAP_IDIVA;
if (!(elf_hwcap & mask))
return;
pr_info("CPU: div instructions available: patching division code\n");
fn_addr = ((uintptr_t)&__aeabi_uidiv) & ~1;
((u32 *)fn_addr)[0] = udiv_instruction();
((u32 *)fn_addr)[1] = bx_lr_instruction();
flush_icache_range(fn_addr, fn_addr + 8);
fn_addr = ((uintptr_t)&__aeabi_idiv) & ~1;
((u32 *)fn_addr)[0] = sdiv_instruction();
((u32 *)fn_addr)[1] = bx_lr_instruction();
flush_icache_range(fn_addr, fn_addr + 8);
}
#else
static inline void patch_aeabi_idiv(void) { }
#endif
static void __init cpuid_init_hwcaps(void)
{
int block;
@ -642,6 +711,7 @@ static void __init setup_processor(void)
elf_hwcap = list->elf_hwcap;
cpuid_init_hwcaps();
patch_aeabi_idiv();
#ifndef CONFIG_ARM_THUMB
elf_hwcap &= ~(HWCAP_THUMB | HWCAP_IDIVT);
@ -956,8 +1026,8 @@ void __init setup_arch(char **cmdline_p)
strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = cmd_line;
if (IS_ENABLED(CONFIG_FIX_EARLYCON_MEM))
early_fixmap_init();
early_fixmap_init();
early_ioremap_init();
parse_early_param();
@ -965,9 +1035,12 @@ void __init setup_arch(char **cmdline_p)
early_paging_init(mdesc);
#endif
setup_dma_zone(mdesc);
efi_init();
sanity_check_meminfo();
arm_memblock_init(mdesc);
early_ioremap_reset();
paging_init(mdesc);
request_standard_resources(mdesc);

View File

@ -0,0 +1,62 @@
/*
* Copyright (c) 2015, Linaro Limited
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/linkage.h>
#include <asm/opcodes-sec.h>
#include <asm/opcodes-virt.h>
#include <asm/unwind.h>
/*
* Wrap c macros in asm macros to delay expansion until after the
* SMCCC asm macro is expanded.
*/
.macro SMCCC_SMC
__SMC(0)
.endm
.macro SMCCC_HVC
__HVC(0)
.endm
.macro SMCCC instr
UNWIND( .fnstart)
mov r12, sp
push {r4-r7}
UNWIND( .save {r4-r7})
ldm r12, {r4-r7}
\instr
pop {r4-r7}
ldr r12, [sp, #(4 * 4)]
stm r12, {r0-r3}
bx lr
UNWIND( .fnend)
.endm
/*
* void smccc_smc(unsigned long a0, unsigned long a1, unsigned long a2,
* unsigned long a3, unsigned long a4, unsigned long a5,
* unsigned long a6, unsigned long a7, struct arm_smccc_res *res)
*/
ENTRY(arm_smccc_smc)
SMCCC SMCCC_SMC
ENDPROC(arm_smccc_smc)
/*
* void smccc_hvc(unsigned long a0, unsigned long a1, unsigned long a2,
* unsigned long a3, unsigned long a4, unsigned long a5,
* unsigned long a6, unsigned long a7, struct arm_smccc_res *res)
*/
ENTRY(arm_smccc_hvc)
SMCCC SMCCC_HVC
ENDPROC(arm_smccc_hvc)

View File

@ -69,11 +69,15 @@ enum ipi_msg_type {
IPI_TIMER,
IPI_RESCHEDULE,
IPI_CALL_FUNC,
IPI_CALL_FUNC_SINGLE,
IPI_CPU_STOP,
IPI_IRQ_WORK,
IPI_COMPLETION,
IPI_CPU_BACKTRACE = 15,
IPI_CPU_BACKTRACE,
/*
* SGI8-15 can be reserved by secure firmware, and thus may
* not be usable by the kernel. Please keep the above limited
* to at most 8 entries.
*/
};
static DECLARE_COMPLETION(cpu_running);
@ -475,7 +479,6 @@ static const char *ipi_types[NR_IPI] __tracepoint_string = {
S(IPI_TIMER, "Timer broadcast interrupts"),
S(IPI_RESCHEDULE, "Rescheduling interrupts"),
S(IPI_CALL_FUNC, "Function call interrupts"),
S(IPI_CALL_FUNC_SINGLE, "Single function call interrupts"),
S(IPI_CPU_STOP, "CPU stop interrupts"),
S(IPI_IRQ_WORK, "IRQ work interrupts"),
S(IPI_COMPLETION, "completion interrupts"),
@ -525,7 +528,7 @@ void arch_send_wakeup_ipi_mask(const struct cpumask *mask)
void arch_send_call_function_single_ipi(int cpu)
{
smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC);
}
#ifdef CONFIG_IRQ_WORK
@ -620,12 +623,6 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
irq_exit();
break;
case IPI_CALL_FUNC_SINGLE:
irq_enter();
generic_smp_call_function_single_interrupt();
irq_exit();
break;
case IPI_CPU_STOP:
irq_enter();
ipi_cpu_stop(cpu);

View File

@ -224,7 +224,7 @@ static int install_vvar(struct mm_struct *mm, unsigned long addr)
VM_READ | VM_MAYREAD,
&vdso_data_mapping);
return IS_ERR(vma) ? PTR_ERR(vma) : 0;
return PTR_ERR_OR_ZERO(vma);
}
/* assumes mmap_sem is write-locked */

View File

@ -205,6 +205,10 @@ Boston, MA 02111-1307, USA. */
.endm
#ifdef CONFIG_ARM_PATCH_IDIV
.align 3
#endif
ENTRY(__udivsi3)
ENTRY(__aeabi_uidiv)
UNWIND(.fnstart)
@ -253,6 +257,10 @@ UNWIND(.fnstart)
UNWIND(.fnend)
ENDPROC(__umodsi3)
#ifdef CONFIG_ARM_PATCH_IDIV
.align 3
#endif
ENTRY(__divsi3)
ENTRY(__aeabi_idiv)
UNWIND(.fnstart)

View File

@ -16,6 +16,7 @@
#include <linux/of_platform.h>
#include <linux/irqdomain.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include "common.h"
@ -76,8 +77,17 @@ static const char *const n900_boards_compat[] __initconst = {
NULL,
};
/* Legacy userspace on Nokia N900 needs ATAGS exported in /proc/atags,
* save them while the data is still not overwritten
*/
static void __init rx51_reserve(void)
{
save_atags((const struct tag *)(PAGE_OFFSET + 0x100));
omap_reserve();
}
DT_MACHINE_START(OMAP3_N900_DT, "Nokia RX-51 board")
.reserve = omap_reserve,
.reserve = rx51_reserve,
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
.init_machine = omap_generic_init,

View File

@ -790,7 +790,7 @@ static const struct l2c_init_data l2c310_init_fns __initconst = {
};
static int __init __l2c_init(const struct l2c_init_data *data,
u32 aux_val, u32 aux_mask, u32 cache_id)
u32 aux_val, u32 aux_mask, u32 cache_id, bool nosync)
{
struct outer_cache_fns fns;
unsigned way_size_bits, ways;
@ -866,6 +866,10 @@ static int __init __l2c_init(const struct l2c_init_data *data,
fns.configure = outer_cache.configure;
if (data->fixup)
data->fixup(l2x0_base, cache_id, &fns);
if (nosync) {
pr_info("L2C: disabling outer sync\n");
fns.sync = NULL;
}
/*
* Check if l2x0 controller is already enabled. If we are booting
@ -925,7 +929,7 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
if (data->save)
data->save(l2x0_base);
__l2c_init(data, aux_val, aux_mask, cache_id);
__l2c_init(data, aux_val, aux_mask, cache_id, false);
}
#ifdef CONFIG_OF
@ -1060,6 +1064,18 @@ static void __init l2x0_of_parse(const struct device_node *np,
val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT;
}
if (of_property_read_bool(np, "arm,parity-enable")) {
mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
val |= L2C_AUX_CTRL_PARITY_ENABLE;
} else if (of_property_read_bool(np, "arm,parity-disable")) {
mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
}
if (of_property_read_bool(np, "arm,shared-override")) {
mask &= ~L2C_AUX_CTRL_SHARED_OVERRIDE;
val |= L2C_AUX_CTRL_SHARED_OVERRIDE;
}
ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_256K);
if (ret)
return;
@ -1176,6 +1192,14 @@ static void __init l2c310_of_parse(const struct device_node *np,
*aux_mask &= ~L2C_AUX_CTRL_SHARED_OVERRIDE;
}
if (of_property_read_bool(np, "arm,parity-enable")) {
*aux_val |= L2C_AUX_CTRL_PARITY_ENABLE;
*aux_mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
} else if (of_property_read_bool(np, "arm,parity-disable")) {
*aux_val &= ~L2C_AUX_CTRL_PARITY_ENABLE;
*aux_mask &= ~L2C_AUX_CTRL_PARITY_ENABLE;
}
prefetch = l2x0_saved_regs.prefetch_ctrl;
ret = of_property_read_u32(np, "arm,double-linefill", &val);
@ -1704,6 +1728,7 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
struct resource res;
u32 cache_id, old_aux;
u32 cache_level = 2;
bool nosync = false;
np = of_find_matching_node(NULL, l2x0_ids);
if (!np)
@ -1742,6 +1767,8 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
if (cache_level != 2)
pr_err("L2C: device tree specifies invalid cache level\n");
nosync = of_property_read_bool(np, "arm,outer-sync-disable");
/* Read back current (default) hardware configuration */
if (data->save)
data->save(l2x0_base);
@ -1756,6 +1783,6 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
else
cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
return __l2c_init(data, aux_val, aux_mask, cache_id);
return __l2c_init(data, aux_val, aux_mask, cache_id, nosync);
}
#endif

View File

@ -377,17 +377,6 @@ static const struct of_device_id uniphier_cache_match[] __initconst = {
{ /* sentinel */ }
};
static struct device_node * __init uniphier_cache_get_next_level_node(
struct device_node *np)
{
u32 phandle;
if (of_property_read_u32(np, "next-level-cache", &phandle))
return NULL;
return of_find_node_by_phandle(phandle);
}
static int __init __uniphier_cache_init(struct device_node *np,
unsigned int *cache_level)
{
@ -491,7 +480,7 @@ static int __init __uniphier_cache_init(struct device_node *np,
* next level cache fails because we want to continue with available
* cache levels.
*/
next_np = uniphier_cache_get_next_level_node(np);
next_np = of_find_next_cache_node(np);
if (next_np) {
(*cache_level)++;
ret = __uniphier_cache_init(next_np, cache_level);

View File

@ -192,7 +192,7 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max_low,
#ifdef CONFIG_HAVE_ARCH_PFN_VALID
int pfn_valid(unsigned long pfn)
{
return memblock_is_memory(__pfn_to_phys(pfn));
return memblock_is_map_memory(__pfn_to_phys(pfn));
}
EXPORT_SYMBOL(pfn_valid);
#endif
@ -433,6 +433,9 @@ static void __init free_highpages(void)
if (end <= max_low)
continue;
if (memblock_is_nomap(mem))
continue;
/* Truncate partial highmem entries */
if (start < max_low)
start = max_low;

View File

@ -30,6 +30,7 @@
#include <asm/cp15.h>
#include <asm/cputype.h>
#include <asm/cacheflush.h>
#include <asm/early_ioremap.h>
#include <asm/mmu_context.h>
#include <asm/pgalloc.h>
#include <asm/tlbflush.h>
@ -469,3 +470,11 @@ int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr)
}
EXPORT_SYMBOL_GPL(pci_ioremap_io);
#endif
/*
* Must be called after early_fixmap_init
*/
void __init early_ioremap_init(void)
{
early_ioremap_setup();
}

View File

@ -390,7 +390,7 @@ void __init early_fixmap_init(void)
* The early fixmap range spans multiple pmds, for which
* we are not prepared:
*/
BUILD_BUG_ON((__fix_to_virt(__end_of_permanent_fixed_addresses) >> PMD_SHIFT)
BUILD_BUG_ON((__fix_to_virt(__end_of_early_ioremap_region) >> PMD_SHIFT)
!= FIXADDR_TOP >> PMD_SHIFT);
pmd = fixmap_pmd(FIXADDR_TOP);
@ -572,7 +572,7 @@ static void __init build_mem_type_table(void)
* in the Short-descriptor translation table format descriptors.
*/
if (cpu_arch == CPU_ARCH_ARMv7 &&
(read_cpuid_ext(CPUID_EXT_MMFR0) & 0xF) == 4) {
(read_cpuid_ext(CPUID_EXT_MMFR0) & 0xF) >= 4) {
user_pmd_table |= PMD_PXNTABLE;
}
#endif
@ -724,30 +724,49 @@ static void __init *early_alloc(unsigned long sz)
return early_alloc_aligned(sz, sz);
}
static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr, unsigned long prot)
static void *__init late_alloc(unsigned long sz)
{
void *ptr = (void *)__get_free_pages(PGALLOC_GFP, get_order(sz));
BUG_ON(!ptr);
return ptr;
}
static pte_t * __init pte_alloc(pmd_t *pmd, unsigned long addr,
unsigned long prot,
void *(*alloc)(unsigned long sz))
{
if (pmd_none(*pmd)) {
pte_t *pte = early_alloc(PTE_HWTABLE_OFF + PTE_HWTABLE_SIZE);
pte_t *pte = alloc(PTE_HWTABLE_OFF + PTE_HWTABLE_SIZE);
__pmd_populate(pmd, __pa(pte), prot);
}
BUG_ON(pmd_bad(*pmd));
return pte_offset_kernel(pmd, addr);
}
static pte_t * __init early_pte_alloc(pmd_t *pmd, unsigned long addr,
unsigned long prot)
{
return pte_alloc(pmd, addr, prot, early_alloc);
}
static void __init alloc_init_pte(pmd_t *pmd, unsigned long addr,
unsigned long end, unsigned long pfn,
const struct mem_type *type)
const struct mem_type *type,
void *(*alloc)(unsigned long sz),
bool ng)
{
pte_t *pte = early_pte_alloc(pmd, addr, type->prot_l1);
pte_t *pte = pte_alloc(pmd, addr, type->prot_l1, alloc);
do {
set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)), 0);
set_pte_ext(pte, pfn_pte(pfn, __pgprot(type->prot_pte)),
ng ? PTE_EXT_NG : 0);
pfn++;
} while (pte++, addr += PAGE_SIZE, addr != end);
}
static void __init __map_init_section(pmd_t *pmd, unsigned long addr,
unsigned long end, phys_addr_t phys,
const struct mem_type *type)
const struct mem_type *type, bool ng)
{
pmd_t *p = pmd;
@ -765,7 +784,7 @@ static void __init __map_init_section(pmd_t *pmd, unsigned long addr,
pmd++;
#endif
do {
*pmd = __pmd(phys | type->prot_sect);
*pmd = __pmd(phys | type->prot_sect | (ng ? PMD_SECT_nG : 0));
phys += SECTION_SIZE;
} while (pmd++, addr += SECTION_SIZE, addr != end);
@ -774,7 +793,8 @@ static void __init __map_init_section(pmd_t *pmd, unsigned long addr,
static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
unsigned long end, phys_addr_t phys,
const struct mem_type *type)
const struct mem_type *type,
void *(*alloc)(unsigned long sz), bool ng)
{
pmd_t *pmd = pmd_offset(pud, addr);
unsigned long next;
@ -792,10 +812,10 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
*/
if (type->prot_sect &&
((addr | next | phys) & ~SECTION_MASK) == 0) {
__map_init_section(pmd, addr, next, phys, type);
__map_init_section(pmd, addr, next, phys, type, ng);
} else {
alloc_init_pte(pmd, addr, next,
__phys_to_pfn(phys), type);
__phys_to_pfn(phys), type, alloc, ng);
}
phys += next - addr;
@ -805,21 +825,24 @@ static void __init alloc_init_pmd(pud_t *pud, unsigned long addr,
static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
unsigned long end, phys_addr_t phys,
const struct mem_type *type)
const struct mem_type *type,
void *(*alloc)(unsigned long sz), bool ng)
{
pud_t *pud = pud_offset(pgd, addr);
unsigned long next;
do {
next = pud_addr_end(addr, end);
alloc_init_pmd(pud, addr, next, phys, type);
alloc_init_pmd(pud, addr, next, phys, type, alloc, ng);
phys += next - addr;
} while (pud++, addr = next, addr != end);
}
#ifndef CONFIG_ARM_LPAE
static void __init create_36bit_mapping(struct map_desc *md,
const struct mem_type *type)
static void __init create_36bit_mapping(struct mm_struct *mm,
struct map_desc *md,
const struct mem_type *type,
bool ng)
{
unsigned long addr, length, end;
phys_addr_t phys;
@ -859,7 +882,7 @@ static void __init create_36bit_mapping(struct map_desc *md,
*/
phys |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20);
pgd = pgd_offset_k(addr);
pgd = pgd_offset(mm, addr);
end = addr + length;
do {
pud_t *pud = pud_offset(pgd, addr);
@ -867,7 +890,8 @@ static void __init create_36bit_mapping(struct map_desc *md,
int i;
for (i = 0; i < 16; i++)
*pmd++ = __pmd(phys | type->prot_sect | PMD_SECT_SUPER);
*pmd++ = __pmd(phys | type->prot_sect | PMD_SECT_SUPER |
(ng ? PMD_SECT_nG : 0));
addr += SUPERSECTION_SIZE;
phys += SUPERSECTION_SIZE;
@ -876,33 +900,15 @@ static void __init create_36bit_mapping(struct map_desc *md,
}
#endif /* !CONFIG_ARM_LPAE */
/*
* Create the page directory entries and any necessary
* page tables for the mapping specified by `md'. We
* are able to cope here with varying sizes and address
* offsets, and we take full advantage of sections and
* supersections.
*/
static void __init create_mapping(struct map_desc *md)
static void __init __create_mapping(struct mm_struct *mm, struct map_desc *md,
void *(*alloc)(unsigned long sz),
bool ng)
{
unsigned long addr, length, end;
phys_addr_t phys;
const struct mem_type *type;
pgd_t *pgd;
if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
pr_warn("BUG: not creating mapping for 0x%08llx at 0x%08lx in user region\n",
(long long)__pfn_to_phys((u64)md->pfn), md->virtual);
return;
}
if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
md->virtual >= PAGE_OFFSET && md->virtual < FIXADDR_START &&
(md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) {
pr_warn("BUG: mapping for 0x%08llx at 0x%08lx out of vmalloc space\n",
(long long)__pfn_to_phys((u64)md->pfn), md->virtual);
}
type = &mem_types[md->type];
#ifndef CONFIG_ARM_LPAE
@ -910,7 +916,7 @@ static void __init create_mapping(struct map_desc *md)
* Catch 36-bit addresses
*/
if (md->pfn >= 0x100000) {
create_36bit_mapping(md, type);
create_36bit_mapping(mm, md, type, ng);
return;
}
#endif
@ -925,18 +931,55 @@ static void __init create_mapping(struct map_desc *md)
return;
}
pgd = pgd_offset_k(addr);
pgd = pgd_offset(mm, addr);
end = addr + length;
do {
unsigned long next = pgd_addr_end(addr, end);
alloc_init_pud(pgd, addr, next, phys, type);
alloc_init_pud(pgd, addr, next, phys, type, alloc, ng);
phys += next - addr;
addr = next;
} while (pgd++, addr != end);
}
/*
* Create the page directory entries and any necessary
* page tables for the mapping specified by `md'. We
* are able to cope here with varying sizes and address
* offsets, and we take full advantage of sections and
* supersections.
*/
static void __init create_mapping(struct map_desc *md)
{
if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
pr_warn("BUG: not creating mapping for 0x%08llx at 0x%08lx in user region\n",
(long long)__pfn_to_phys((u64)md->pfn), md->virtual);
return;
}
if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
md->virtual >= PAGE_OFFSET && md->virtual < FIXADDR_START &&
(md->virtual < VMALLOC_START || md->virtual >= VMALLOC_END)) {
pr_warn("BUG: mapping for 0x%08llx at 0x%08lx out of vmalloc space\n",
(long long)__pfn_to_phys((u64)md->pfn), md->virtual);
}
__create_mapping(&init_mm, md, early_alloc, false);
}
void __init create_mapping_late(struct mm_struct *mm, struct map_desc *md,
bool ng)
{
#ifdef CONFIG_ARM_LPAE
pud_t *pud = pud_alloc(mm, pgd_offset(mm, md->virtual), md->virtual);
if (WARN_ON(!pud))
return;
pmd_alloc(mm, pud, 0);
#endif
__create_mapping(mm, md, late_alloc, ng);
}
/*
* Create the architecture specific mappings
*/
@ -1392,6 +1435,9 @@ static void __init map_lowmem(void)
phys_addr_t end = start + reg->size;
struct map_desc map;
if (memblock_is_nomap(reg))
continue;
if (end > arm_lowmem_limit)
end = arm_lowmem_limit;
if (start >= end)

View File

@ -274,10 +274,12 @@ __v7_ca15mp_setup:
__v7_b15mp_setup:
__v7_ca17mp_setup:
mov r10, #0
1: adr r12, __v7_setup_stack @ the local stack
stmia r12, {r0-r5, lr} @ v7_invalidate_l1 touches r0-r6
1: adr r0, __v7_setup_stack_ptr
ldr r12, [r0]
add r12, r12, r0 @ the local stack
stmia r12, {r1-r6, lr} @ v7_invalidate_l1 touches r0-r6
bl v7_invalidate_l1
ldmia r12, {r0-r5, lr}
ldmia r12, {r1-r6, lr}
#ifdef CONFIG_SMP
ALT_SMP(mrc p15, 0, r0, c1, c0, 1)
ALT_UP(mov r0, #(1 << 6)) @ fake it for UP
@ -415,10 +417,12 @@ __v7_pj4b_setup:
#endif /* CONFIG_CPU_PJ4B */
__v7_setup:
adr r12, __v7_setup_stack @ the local stack
stmia r12, {r0-r5, lr} @ v7_invalidate_l1 touches r0-r6
adr r0, __v7_setup_stack_ptr
ldr r12, [r0]
add r12, r12, r0 @ the local stack
stmia r12, {r1-r6, lr} @ v7_invalidate_l1 touches r0-r6
bl v7_invalidate_l1
ldmia r12, {r0-r5, lr}
ldmia r12, {r1-r6, lr}
__v7_setup_cont:
and r0, r9, #0xff000000 @ ARM?
@ -480,11 +484,16 @@ __errata_finish:
orr r0, r0, r6 @ set them
THUMB( orr r0, r0, #1 << 30 ) @ Thumb exceptions
ret lr @ return to head.S:__ret
ENDPROC(__v7_setup)
.align 2
__v7_setup_stack_ptr:
.word __v7_setup_stack - .
ENDPROC(__v7_setup)
.bss
.align 2
__v7_setup_stack:
.space 4 * 7 @ 12 registers
.space 4 * 7 @ 7 registers
__INITDATA

View File

@ -12,6 +12,7 @@
*/
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/memory.h>
#include <asm/v7m.h>
#include "proc-macros.S"
@ -97,19 +98,19 @@ __v7m_setup:
mov r5, #0x00800000
str r5, [r0, V7M_SCB_SHPR3] @ set PendSV priority
@ SVC to run the kernel in this mode
@ SVC to switch to handler mode. Notice that this requires sp to
@ point to writeable memory because the processor saves
@ some registers to the stack.
badr r1, 1f
ldr r5, [r12, #11 * 4] @ read the SVC vector entry
str r1, [r12, #11 * 4] @ write the temporary SVC vector entry
mov r6, lr @ save LR
mov r7, sp @ save SP
ldr sp, =__v7m_setup_stack_top
ldr sp, =init_thread_union + THREAD_START_SP
cpsie i
svc #0
1: cpsid i
str r5, [r12, #11 * 4] @ restore the original SVC vector entry
mov lr, r6 @ restore LR
mov sp, r7 @ restore SP
@ Special-purpose control register
mov r1, #1
@ -123,11 +124,6 @@ __v7m_setup:
ret lr
ENDPROC(__v7m_setup)
.align 2
__v7m_setup_stack:
.space 4 * 8 @ 8 registers
__v7m_setup_stack_top:
define_processor_functions v7m, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1
.section ".rodata"

View File

@ -93,6 +93,7 @@ config ARM64
select SPARSE_IRQ
select SYSCTL_EXCEPTION_TRACE
select HAVE_CONTEXT_TRACKING
select HAVE_ARM_SMCCC
help
ARM 64-bit (AArch64) Linux support.

View File

@ -14,10 +14,10 @@ CFLAGS_REMOVE_return_address.o = -pg
arm64-obj-y := debug-monitors.o entry.o irq.o fpsimd.o \
entry-fpsimd.o process.o ptrace.o setup.o signal.o \
sys.o stacktrace.o time.o traps.o io.o vdso.o \
hyp-stub.o psci.o psci-call.o cpu_ops.o insn.o \
hyp-stub.o psci.o cpu_ops.o insn.o \
return_address.o cpuinfo.o cpu_errata.o \
cpufeature.o alternative.o cacheinfo.o \
smp.o smp_spin_table.o topology.o
smp.o smp_spin_table.o topology.o smccc-call.o
extra-$(CONFIG_EFI) := efi-entry.o

View File

@ -26,6 +26,7 @@
#include <linux/syscalls.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/arm-smccc.h>
#include <asm/checksum.h>
@ -68,3 +69,7 @@ EXPORT_SYMBOL(test_and_change_bit);
#ifdef CONFIG_FUNCTION_TRACER
EXPORT_SYMBOL(_mcount);
#endif
/* arm-smccc */
EXPORT_SYMBOL(arm_smccc_smc);
EXPORT_SYMBOL(arm_smccc_hvc);

View File

@ -28,6 +28,7 @@
#include <asm/suspend.h>
#include <asm/vdso_datapage.h>
#include <linux/kbuild.h>
#include <linux/arm-smccc.h>
int main(void)
{
@ -161,5 +162,7 @@ int main(void)
DEFINE(SLEEP_SAVE_SP_PHYS, offsetof(struct sleep_save_sp, save_ptr_stash_phys));
DEFINE(SLEEP_SAVE_SP_VIRT, offsetof(struct sleep_save_sp, save_ptr_stash));
#endif
DEFINE(ARM_SMCCC_RES_X0_OFFS, offsetof(struct arm_smccc_res, a0));
DEFINE(ARM_SMCCC_RES_X2_OFFS, offsetof(struct arm_smccc_res, a2));
return 0;
}

View File

@ -1,28 +0,0 @@
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Copyright (C) 2015 ARM Limited
*
* Author: Will Deacon <will.deacon@arm.com>
*/
#include <linux/linkage.h>
/* int __invoke_psci_fn_hvc(u64 function_id, u64 arg0, u64 arg1, u64 arg2) */
ENTRY(__invoke_psci_fn_hvc)
hvc #0
ret
ENDPROC(__invoke_psci_fn_hvc)
/* int __invoke_psci_fn_smc(u64 function_id, u64 arg0, u64 arg1, u64 arg2) */
ENTRY(__invoke_psci_fn_smc)
smc #0
ret
ENDPROC(__invoke_psci_fn_smc)

View File

@ -0,0 +1,43 @@
/*
* Copyright (c) 2015, Linaro Limited
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License Version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
.macro SMCCC instr
.cfi_startproc
\instr #0
ldr x4, [sp]
stp x0, x1, [x4, #ARM_SMCCC_RES_X0_OFFS]
stp x2, x3, [x4, #ARM_SMCCC_RES_X2_OFFS]
ret
.cfi_endproc
.endm
/*
* void arm_smccc_smc(unsigned long a0, unsigned long a1, unsigned long a2,
* unsigned long a3, unsigned long a4, unsigned long a5,
* unsigned long a6, unsigned long a7, struct arm_smccc_res *res)
*/
ENTRY(arm_smccc_smc)
SMCCC smc
ENDPROC(arm_smccc_smc)
/*
* void arm_smccc_hvc(unsigned long a0, unsigned long a1, unsigned long a2,
* unsigned long a3, unsigned long a4, unsigned long a5,
* unsigned long a6, unsigned long a7, struct arm_smccc_res *res)
*/
ENTRY(arm_smccc_hvc)
SMCCC hvc
ENDPROC(arm_smccc_hvc)

View File

@ -173,6 +173,9 @@ config QCOM_SCM_64
def_bool y
depends on QCOM_SCM && ARM64
config HAVE_ARM_SMCCC
bool
source "drivers/firmware/broadcom/Kconfig"
source "drivers/firmware/google/Kconfig"
source "drivers/firmware/efi/Kconfig"

View File

@ -20,4 +20,5 @@ obj-$(CONFIG_EFI_STUB) += libstub/
obj-$(CONFIG_EFI_FAKE_MEMMAP) += fake_mem.o
arm-obj-$(CONFIG_EFI) := arm-init.o arm-runtime.o
obj-$(CONFIG_ARM) += $(arm-obj-y)
obj-$(CONFIG_ARM64) += $(arm-obj-y)

View File

@ -34,6 +34,7 @@ $(obj)/lib-%.o: $(srctree)/lib/%.c FORCE
lib-$(CONFIG_EFI_ARMSTUB) += arm-stub.o fdt.o string.o \
$(patsubst %.c,lib-%.o,$(arm-deps))
lib-$(CONFIG_ARM) += arm32-stub.o
lib-$(CONFIG_ARM64) += arm64-stub.o
CFLAGS_arm64-stub.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
@ -67,3 +68,11 @@ quiet_cmd_stubcopy = STUBCPY $@
$(OBJDUMP) -r $@ | grep $(STUBCOPY_RELOC-y) \
&& (echo >&2 "$@: absolute symbol references not allowed in the EFI stub"; \
rm -f $@; /bin/false); else /bin/false; fi
#
# ARM discards the .data section because it disallows r/w data in the
# decompressor. So move our .data to .data.efistub, which is preserved
# explicitly by the decompressor linker script.
#
STUBCOPY_FLAGS-$(CONFIG_ARM) += --rename-section .data=.data.efistub
STUBCOPY_RELOC-$(CONFIG_ARM) := R_ARM_ABS

View File

@ -303,8 +303,10 @@ fail:
* The value chosen is the largest non-zero power of 2 suitable for this purpose
* both on 32-bit and 64-bit ARM CPUs, to maximize the likelihood that it can
* be mapped efficiently.
* Since 32-bit ARM could potentially execute with a 1G/3G user/kernel split,
* map everything below 1 GB.
*/
#define EFI_RT_VIRTUAL_BASE 0x40000000
#define EFI_RT_VIRTUAL_BASE SZ_512M
static int cmp_mem_desc(const void *l, const void *r)
{

View File

@ -0,0 +1,85 @@
/*
* Copyright (C) 2013 Linaro Ltd; <roy.franz@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/efi.h>
#include <asm/efi.h>
efi_status_t handle_kernel_image(efi_system_table_t *sys_table,
unsigned long *image_addr,
unsigned long *image_size,
unsigned long *reserve_addr,
unsigned long *reserve_size,
unsigned long dram_base,
efi_loaded_image_t *image)
{
unsigned long nr_pages;
efi_status_t status;
/* Use alloc_addr to tranlsate between types */
efi_physical_addr_t alloc_addr;
/*
* Verify that the DRAM base address is compatible with the ARM
* boot protocol, which determines the base of DRAM by masking
* off the low 27 bits of the address at which the zImage is
* loaded. These assumptions are made by the decompressor,
* before any memory map is available.
*/
dram_base = round_up(dram_base, SZ_128M);
/*
* Reserve memory for the uncompressed kernel image. This is
* all that prevents any future allocations from conflicting
* with the kernel. Since we can't tell from the compressed
* image how much DRAM the kernel actually uses (due to BSS
* size uncertainty) we allocate the maximum possible size.
* Do this very early, as prints can cause memory allocations
* that may conflict with this.
*/
alloc_addr = dram_base;
*reserve_size = MAX_UNCOMP_KERNEL_SIZE;
nr_pages = round_up(*reserve_size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
status = sys_table->boottime->allocate_pages(EFI_ALLOCATE_ADDRESS,
EFI_LOADER_DATA,
nr_pages, &alloc_addr);
if (status != EFI_SUCCESS) {
*reserve_size = 0;
pr_efi_err(sys_table, "Unable to allocate memory for uncompressed kernel.\n");
return status;
}
*reserve_addr = alloc_addr;
/*
* Relocate the zImage, so that it appears in the lowest 128 MB
* memory window.
*/
*image_size = image->image_size;
status = efi_relocate_kernel(sys_table, image_addr, *image_size,
*image_size,
dram_base + MAX_UNCOMP_KERNEL_SIZE, 0);
if (status != EFI_SUCCESS) {
pr_efi_err(sys_table, "Failed to relocate kernel.\n");
efi_free(sys_table, *reserve_size, *reserve_addr);
*reserve_size = 0;
return status;
}
/*
* Check to see if we were able to allocate memory low enough
* in memory. The kernel determines the base of DRAM from the
* address at which the zImage is loaded.
*/
if (*image_addr + *image_size > dram_base + ZIMAGE_OFFSET_LIMIT) {
pr_efi_err(sys_table, "Failed to relocate kernel, no low memory available.\n");
efi_free(sys_table, *reserve_size, *reserve_addr);
*reserve_size = 0;
efi_free(sys_table, *image_size, *image_addr);
*image_size = 0;
return EFI_LOAD_ERROR;
}
return EFI_SUCCESS;
}

View File

@ -13,6 +13,7 @@
#define pr_fmt(fmt) "psci: " fmt
#include <linux/arm-smccc.h>
#include <linux/errno.h>
#include <linux/linkage.h>
#include <linux/of.h>
@ -58,8 +59,6 @@ struct psci_operations psci_ops;
typedef unsigned long (psci_fn)(unsigned long, unsigned long,
unsigned long, unsigned long);
asmlinkage psci_fn __invoke_psci_fn_hvc;
asmlinkage psci_fn __invoke_psci_fn_smc;
static psci_fn *invoke_psci_fn;
enum psci_function {
@ -107,6 +106,26 @@ bool psci_power_state_is_valid(u32 state)
return !(state & ~valid_mask);
}
static unsigned long __invoke_psci_fn_hvc(unsigned long function_id,
unsigned long arg0, unsigned long arg1,
unsigned long arg2)
{
struct arm_smccc_res res;
arm_smccc_hvc(function_id, arg0, arg1, arg2, 0, 0, 0, 0, &res);
return res.a0;
}
static unsigned long __invoke_psci_fn_smc(unsigned long function_id,
unsigned long arg0, unsigned long arg1,
unsigned long arg2)
{
struct arm_smccc_res res;
arm_smccc_smc(function_id, arg0, arg1, arg2, 0, 0, 0, 0, &res);
return res.a0;
}
static int psci_to_linux_errno(int errno)
{
switch (errno) {

View File

@ -116,7 +116,7 @@ static const struct spm_reg_data spm_reg_8064_cpu = {
static DEFINE_PER_CPU(struct spm_driver_data *, cpu_spm_drv);
typedef int (*idle_fn)(int);
typedef int (*idle_fn)(void);
static DEFINE_PER_CPU(idle_fn*, qcom_idle_ops);
static inline void spm_register_write(struct spm_driver_data *drv,
@ -179,10 +179,10 @@ static int qcom_pm_collapse(unsigned long int unused)
return -1;
}
static int qcom_cpu_spc(int cpu)
static int qcom_cpu_spc(void)
{
int ret;
struct spm_driver_data *drv = per_cpu(cpu_spm_drv, cpu);
struct spm_driver_data *drv = __this_cpu_read(cpu_spm_drv);
spm_set_low_power_mode(drv, PM_SLEEP_MODE_SPC);
ret = cpu_suspend(0, qcom_pm_collapse);
@ -197,9 +197,9 @@ static int qcom_cpu_spc(int cpu)
return ret;
}
static int qcom_idle_enter(int cpu, unsigned long index)
static int qcom_idle_enter(unsigned long index)
{
return per_cpu(qcom_idle_ops, cpu)[index](cpu);
return __this_cpu_read(qcom_idle_ops)[index]();
}
static const struct of_device_id qcom_idle_state_match[] __initconst = {

104
include/linux/arm-smccc.h Normal file
View File

@ -0,0 +1,104 @@
/*
* Copyright (c) 2015, Linaro Limited
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#ifndef __LINUX_ARM_SMCCC_H
#define __LINUX_ARM_SMCCC_H
#include <linux/linkage.h>
#include <linux/types.h>
/*
* This file provides common defines for ARM SMC Calling Convention as
* specified in
* http://infocenter.arm.com/help/topic/com.arm.doc.den0028a/index.html
*/
#define ARM_SMCCC_STD_CALL 0
#define ARM_SMCCC_FAST_CALL 1
#define ARM_SMCCC_TYPE_SHIFT 31
#define ARM_SMCCC_SMC_32 0
#define ARM_SMCCC_SMC_64 1
#define ARM_SMCCC_CALL_CONV_SHIFT 30
#define ARM_SMCCC_OWNER_MASK 0x3F
#define ARM_SMCCC_OWNER_SHIFT 24
#define ARM_SMCCC_FUNC_MASK 0xFFFF
#define ARM_SMCCC_IS_FAST_CALL(smc_val) \
((smc_val) & (ARM_SMCCC_FAST_CALL << ARM_SMCCC_TYPE_SHIFT))
#define ARM_SMCCC_IS_64(smc_val) \
((smc_val) & (ARM_SMCCC_SMC_64 << ARM_SMCCC_CALL_CONV_SHIFT))
#define ARM_SMCCC_FUNC_NUM(smc_val) ((smc_val) & ARM_SMCCC_FUNC_MASK)
#define ARM_SMCCC_OWNER_NUM(smc_val) \
(((smc_val) >> ARM_SMCCC_OWNER_SHIFT) & ARM_SMCCC_OWNER_MASK)
#define ARM_SMCCC_CALL_VAL(type, calling_convention, owner, func_num) \
(((type) << ARM_SMCCC_TYPE_SHIFT) | \
((calling_convention) << ARM_SMCCC_CALL_CONV_SHIFT) | \
(((owner) & ARM_SMCCC_OWNER_MASK) << ARM_SMCCC_OWNER_SHIFT) | \
((func_num) & ARM_SMCCC_FUNC_MASK))
#define ARM_SMCCC_OWNER_ARCH 0
#define ARM_SMCCC_OWNER_CPU 1
#define ARM_SMCCC_OWNER_SIP 2
#define ARM_SMCCC_OWNER_OEM 3
#define ARM_SMCCC_OWNER_STANDARD 4
#define ARM_SMCCC_OWNER_TRUSTED_APP 48
#define ARM_SMCCC_OWNER_TRUSTED_APP_END 49
#define ARM_SMCCC_OWNER_TRUSTED_OS 50
#define ARM_SMCCC_OWNER_TRUSTED_OS_END 63
/**
* struct arm_smccc_res - Result from SMC/HVC call
* @a0-a3 result values from registers 0 to 3
*/
struct arm_smccc_res {
unsigned long a0;
unsigned long a1;
unsigned long a2;
unsigned long a3;
};
/**
* arm_smccc_smc() - make SMC calls
* @a0-a7: arguments passed in registers 0 to 7
* @res: result values from registers 0 to 3
*
* This function is used to make SMC calls following SMC Calling Convention.
* The content of the supplied param are copied to registers 0 to 7 prior
* to the SMC instruction. The return values are updated with the content
* from register 0 to 3 on return from the SMC instruction.
*/
asmlinkage void arm_smccc_smc(unsigned long a0, unsigned long a1,
unsigned long a2, unsigned long a3, unsigned long a4,
unsigned long a5, unsigned long a6, unsigned long a7,
struct arm_smccc_res *res);
/**
* arm_smccc_hvc() - make HVC calls
* @a0-a7: arguments passed in registers 0 to 7
* @res: result values from registers 0 to 3
*
* This function is used to make HVC calls following SMC Calling
* Convention. The content of the supplied param are copied to registers 0
* to 7 prior to the HVC instruction. The return values are updated with
* the content from register 0 to 3 on return from the HVC instruction.
*/
asmlinkage void arm_smccc_hvc(unsigned long a0, unsigned long a1,
unsigned long a2, unsigned long a3, unsigned long a4,
unsigned long a5, unsigned long a6, unsigned long a7,
struct arm_smccc_res *res);
#endif /*__LINUX_ARM_SMCCC_H*/