mirror of
https://github.com/torvalds/linux.git
synced 2024-10-31 01:01:52 +00:00
V4L/DVB (5955): Add support for DiB7070-based devices
This changeset adds support for DiB7070P-based devices by adding the dib0070-driver and putting the appropriate layouts into dib0700_devices.c It also includes a new firmware for the dib0700 which is necessary to make the DiB7070-boards work and it also should fix the i2c-problems on some boards. Signed-off-by: Jean-Philippe Sibers <jpsibers@dibcom.fr> Signed-off-by: Patrick Boettcher <pboettcher@dibcom.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This commit is contained in:
parent
b6884a17fc
commit
01373a5c97
@ -75,6 +75,7 @@ config DVB_USB_DIB0700
|
||||
select DVB_DIB3000MC
|
||||
select DVB_TUNER_MT2060 if !DVB_FE_CUSTOMISE
|
||||
select DVB_TUNER_MT2266 if !DVB_FE_CUSTOMISE
|
||||
select DVB_TUNER_DIB0070
|
||||
help
|
||||
Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
|
||||
USB bridge is also present in devices having the DiB7700 DVB-T-USB
|
||||
|
@ -13,13 +13,18 @@
|
||||
#include "dib7000p.h"
|
||||
#include "mt2060.h"
|
||||
#include "mt2266.h"
|
||||
#include "dib0070.h"
|
||||
|
||||
static int force_lna_activation;
|
||||
module_param(force_lna_activation, int, 0644);
|
||||
MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifyer(s) (LNA), "
|
||||
"if applicable for the device (default: 0=automatic/off).");
|
||||
|
||||
/* Hauppauge Nova-T 500
|
||||
struct dib0700_adapter_state {
|
||||
int (*set_param_save) (struct dvb_frontend *, struct dvb_frontend_parameters *);
|
||||
};
|
||||
|
||||
/* Hauppauge Nova-T 500 (aka Bristol)
|
||||
* has a LNA on GPIO0 which is enabled by setting 1 */
|
||||
static struct mt2060_config bristol_mt2060_config[2] = {
|
||||
{
|
||||
@ -97,7 +102,7 @@ static int bristol_tuner_attach(struct dvb_usb_adapter *adap)
|
||||
st->mt2060_if1[adap->id]) == NULL ? -ENODEV : 0;
|
||||
}
|
||||
|
||||
/* STK7700D: Pinnacle Dual DVB-T Diversity */
|
||||
/* STK7700D: Pinnacle/Terratec/Hauppauge Dual DVB-T Diversity */
|
||||
|
||||
/* MT226x */
|
||||
static struct dibx000_agc_config stk7700d_7000p_mt2266_agc_config[2] = {
|
||||
@ -539,31 +544,243 @@ static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap)
|
||||
st->mt2060_if1[0]) == NULL ? -ENODEV : 0;
|
||||
}
|
||||
|
||||
/* DIB7070 generic */
|
||||
static struct dibx000_agc_config dib7070_agc_config = {
|
||||
BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND,
|
||||
/* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0,
|
||||
* P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */
|
||||
(0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), // setup
|
||||
|
||||
600, // inv_gain
|
||||
10, // time_stabiliz
|
||||
|
||||
0, // alpha_level
|
||||
118, // thlock
|
||||
|
||||
0, // wbd_inv
|
||||
3530, // wbd_ref
|
||||
1, // wbd_sel
|
||||
5, // wbd_alpha
|
||||
|
||||
65535, // agc1_max
|
||||
0, // agc1_min
|
||||
|
||||
65535, // agc2_max
|
||||
0, // agc2_min
|
||||
|
||||
0, // agc1_pt1
|
||||
40, // agc1_pt2
|
||||
183, // agc1_pt3
|
||||
206, // agc1_slope1
|
||||
255, // agc1_slope2
|
||||
72, // agc2_pt1
|
||||
152, // agc2_pt2
|
||||
88, // agc2_slope1
|
||||
90, // agc2_slope2
|
||||
|
||||
17, // alpha_mant
|
||||
27, // alpha_exp
|
||||
23, // beta_mant
|
||||
51, // beta_exp
|
||||
|
||||
0, // perform_agc_softsplit
|
||||
};
|
||||
|
||||
static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff)
|
||||
{
|
||||
return dib7000p_set_gpio(fe, 8, 0, !onoff);
|
||||
}
|
||||
|
||||
static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff)
|
||||
{
|
||||
return dib7000p_set_gpio(fe, 9, 0, onoff);
|
||||
}
|
||||
|
||||
static struct dib0070_config dib7070p_dib0070_config[2] = {
|
||||
{
|
||||
.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
|
||||
.reset = dib7070_tuner_reset,
|
||||
.sleep = dib7070_tuner_sleep,
|
||||
.clock_khz = 12000,
|
||||
.clock_pad_drive = 4
|
||||
}, {
|
||||
.i2c_address = DEFAULT_DIB0070_I2C_ADDRESS,
|
||||
.reset = dib7070_tuner_reset,
|
||||
.sleep = dib7070_tuner_sleep,
|
||||
.clock_khz = 12000,
|
||||
|
||||
}
|
||||
};
|
||||
|
||||
static int dib7070_set_param_override(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep)
|
||||
{
|
||||
struct dvb_usb_adapter *adap = fe->dvb->priv;
|
||||
struct dib0700_adapter_state *state = adap->priv;
|
||||
|
||||
u16 offset;
|
||||
u8 band = BAND_OF_FREQUENCY(fep->frequency/1000);
|
||||
switch (band) {
|
||||
case BAND_VHF: offset = 950; break;
|
||||
case BAND_UHF:
|
||||
default: offset = 550; break;
|
||||
}
|
||||
deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe));
|
||||
dib7000p_set_wbd_ref(fe, offset + dib0070_wbd_offset(fe));
|
||||
return state->set_param_save(fe, fep);
|
||||
}
|
||||
|
||||
static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap)
|
||||
{
|
||||
struct dib0700_adapter_state *st = adap->priv;
|
||||
struct i2c_adapter *tun_i2c = dib7000p_get_i2c_master(adap->fe, DIBX000_I2C_INTERFACE_TUNER, 1);
|
||||
|
||||
if (adap->id == 0) {
|
||||
if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, &dib7070p_dib0070_config[0]) == NULL)
|
||||
return -ENODEV;
|
||||
} else {
|
||||
if (dvb_attach(dib0070_attach, adap->fe, tun_i2c, &dib7070p_dib0070_config[1]) == NULL)
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
st->set_param_save = adap->fe->ops.tuner_ops.set_params;
|
||||
adap->fe->ops.tuner_ops.set_params = dib7070_set_param_override;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = {
|
||||
60000, 15000, // internal, sampling
|
||||
1, 20, 3, 1, 0, // pll_cfg: prediv, ratio, range, reset, bypass
|
||||
0, 0, 1, 1, 2, // misc: refdiv, bypclk_div, IO_CLK_en_core, ADClkSrc, modulo
|
||||
(3 << 14) | (1 << 12) | (524 << 0), // sad_cfg: refsel, sel, freq_15k
|
||||
(0 << 25) | 0, // ifreq = 0.000000 MHz
|
||||
20452225, // timf
|
||||
12000000, // xtal_hz
|
||||
};
|
||||
|
||||
static struct dib7000p_config dib7070p_dib7000p_config = {
|
||||
.output_mpeg2_in_188_bytes = 1,
|
||||
|
||||
.agc_config_count = 1,
|
||||
.agc = &dib7070_agc_config,
|
||||
.bw = &dib7070_bw_config_12_mhz,
|
||||
|
||||
.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
|
||||
.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
|
||||
.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
|
||||
|
||||
.hostbus_diversity = 1,
|
||||
};
|
||||
|
||||
/* STK7070P */
|
||||
static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
|
||||
{
|
||||
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
|
||||
msleep(10);
|
||||
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
|
||||
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
|
||||
dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
|
||||
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
|
||||
|
||||
dib0700_ctrl_clock(adap->dev, 72, 1);
|
||||
|
||||
msleep(10);
|
||||
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
|
||||
msleep(10);
|
||||
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
|
||||
|
||||
dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 1, 18, &dib7070p_dib7000p_config);
|
||||
|
||||
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &dib7070p_dib7000p_config);
|
||||
return adap->fe == NULL ? -ENODEV : 0;
|
||||
}
|
||||
|
||||
/* STK7070PD */
|
||||
static struct dib7000p_config stk7070pd_dib7000p_config[2] = {
|
||||
{
|
||||
.output_mpeg2_in_188_bytes = 1,
|
||||
|
||||
.agc_config_count = 1,
|
||||
.agc = &dib7070_agc_config,
|
||||
.bw = &dib7070_bw_config_12_mhz,
|
||||
|
||||
.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
|
||||
.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
|
||||
.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
|
||||
|
||||
.hostbus_diversity = 1,
|
||||
}, {
|
||||
.output_mpeg2_in_188_bytes = 1,
|
||||
|
||||
.agc_config_count = 1,
|
||||
.agc = &dib7070_agc_config,
|
||||
.bw = &dib7070_bw_config_12_mhz,
|
||||
|
||||
.gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS,
|
||||
.gpio_val = DIB7000P_GPIO_DEFAULT_VALUES,
|
||||
.gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS,
|
||||
|
||||
.hostbus_diversity = 1,
|
||||
}
|
||||
};
|
||||
|
||||
static int stk7070pd_frontend_attach0(struct dvb_usb_adapter *adap)
|
||||
{
|
||||
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
|
||||
msleep(10);
|
||||
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
|
||||
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
|
||||
dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
|
||||
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
|
||||
|
||||
dib0700_ctrl_clock(adap->dev, 72, 1);
|
||||
|
||||
msleep(10);
|
||||
dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
|
||||
msleep(10);
|
||||
dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
|
||||
|
||||
dib7000p_i2c_enumeration(&adap->dev->i2c_adap, 2, 18, stk7070pd_dib7000p_config);
|
||||
|
||||
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x80, &stk7070pd_dib7000p_config[0]);
|
||||
return adap->fe == NULL ? -ENODEV : 0;
|
||||
}
|
||||
|
||||
static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap)
|
||||
{
|
||||
adap->fe = dvb_attach(dib7000p_attach, &adap->dev->i2c_adap, 0x82, &stk7070pd_dib7000p_config[1]);
|
||||
return adap->fe == NULL ? -ENODEV : 0;
|
||||
}
|
||||
|
||||
/* DVB-USB and USB stuff follows */
|
||||
struct usb_device_id dib0700_usb_id_table[] = {
|
||||
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) },
|
||||
/* 0 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P) },
|
||||
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700P_PC) },
|
||||
|
||||
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500) },
|
||||
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_500_2) },
|
||||
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK) },
|
||||
{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) },
|
||||
/* 5 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR) },
|
||||
{ USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_VIDEOMATE_U500) },
|
||||
{ USB_DEVICE(USB_VID_UNIWILL, USB_PID_UNIWILL_STK7700P) },
|
||||
{ USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_STK7700P) },
|
||||
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_T_STICK_2) },
|
||||
{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) },
|
||||
/* 10 */{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_2) },
|
||||
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV2000E) },
|
||||
{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY) },
|
||||
{ USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_HAUPPAUGE_NOVA_TD_STICK) },
|
||||
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7700D) },
|
||||
{ } /* Terminating entry */
|
||||
/* 15 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070P) },
|
||||
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV_DVB_T_FLASH) },
|
||||
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_STK7070PD) },
|
||||
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T) },
|
||||
{ 0 } /* Terminating entry */
|
||||
};
|
||||
MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
|
||||
|
||||
#define DIB0700_DEFAULT_DEVICE_PROPERTIES \
|
||||
.caps = DVB_USB_IS_AN_I2C_ADAPTER, \
|
||||
.usb_ctrl = DEVICE_SPECIFIC, \
|
||||
.firmware = "dvb-usb-dib0700-01.fw", \
|
||||
.firmware = "dvb-usb-dib0700-03-pre1.fw", \
|
||||
.download_firmware = dib0700_download_firmware, \
|
||||
.no_reconnect = 1, \
|
||||
.size_of_priv = sizeof(struct dib0700_state), \
|
||||
@ -675,11 +892,11 @@ struct dvb_usb_device_properties dib0700_devices[] = {
|
||||
{ &dib0700_usb_id_table[12], NULL },
|
||||
{ NULL },
|
||||
},
|
||||
{ "Haupauge Nova-TD Stick",
|
||||
{ "Haupauge Nova-TD Stick/Elgato Eye-TV Diversity",
|
||||
{ &dib0700_usb_id_table[13], NULL },
|
||||
{ NULL },
|
||||
},
|
||||
{ "DiBcom STK7700D",
|
||||
{ "DiBcom STK7700D reference design",
|
||||
{ &dib0700_usb_id_table[14], NULL },
|
||||
{ NULL },
|
||||
},
|
||||
@ -688,7 +905,65 @@ struct dvb_usb_device_properties dib0700_devices[] = {
|
||||
.rc_key_map = stk7700d_rc_keys,
|
||||
.rc_key_map_size = KEY_MAP_SIZE,
|
||||
.rc_query = stk7700d_rc_query
|
||||
}
|
||||
|
||||
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
|
||||
|
||||
.num_adapters = 1,
|
||||
.adapter = {
|
||||
{
|
||||
.frontend_attach = stk7070p_frontend_attach,
|
||||
.tuner_attach = dib7070p_tuner_attach,
|
||||
|
||||
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
|
||||
|
||||
.size_of_priv = sizeof(struct dib0700_adapter_state),
|
||||
},
|
||||
},
|
||||
|
||||
.num_device_descs = 2,
|
||||
.devices = {
|
||||
{ "DiBcom STK7070P reference design",
|
||||
{ &dib0700_usb_id_table[15], NULL },
|
||||
{ NULL },
|
||||
},
|
||||
{ "Pinnacle PCTV DVB-T Flash Stick",
|
||||
{ &dib0700_usb_id_table[16], NULL },
|
||||
{ NULL },
|
||||
},
|
||||
}
|
||||
}, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
|
||||
|
||||
.num_adapters = 2,
|
||||
.adapter = {
|
||||
{
|
||||
.frontend_attach = stk7070pd_frontend_attach0,
|
||||
.tuner_attach = dib7070p_tuner_attach,
|
||||
|
||||
DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
|
||||
|
||||
.size_of_priv = sizeof(struct dib0700_adapter_state),
|
||||
}, {
|
||||
.frontend_attach = stk7070pd_frontend_attach1,
|
||||
.tuner_attach = dib7070p_tuner_attach,
|
||||
|
||||
DIB0700_DEFAULT_STREAMING_CONFIG(0x03),
|
||||
|
||||
.size_of_priv = sizeof(struct dib0700_adapter_state),
|
||||
}
|
||||
},
|
||||
|
||||
.num_device_descs = 2,
|
||||
.devices = {
|
||||
{ "DiBcom STK7070PD reference design",
|
||||
{ &dib0700_usb_id_table[17], NULL },
|
||||
{ NULL },
|
||||
},
|
||||
{ "Pinnacle PCTV Dual DVB-T Diversity Stick",
|
||||
{ &dib0700_usb_id_table[18], NULL },
|
||||
{ NULL },
|
||||
},
|
||||
}
|
||||
},
|
||||
};
|
||||
|
||||
int dib0700_device_count = ARRAY_SIZE(dib0700_devices);
|
||||
|
@ -68,6 +68,8 @@
|
||||
#define USB_PID_DIBCOM_STK7700P 0x1e14
|
||||
#define USB_PID_DIBCOM_STK7700P_PC 0x1e78
|
||||
#define USB_PID_DIBCOM_STK7700D 0x1ef0
|
||||
#define USB_PID_DIBCOM_STK7070P 0x1ebc
|
||||
#define USB_PID_DIBCOM_STK7070PD 0x1ebe
|
||||
#define USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131
|
||||
#define USB_PID_DPOSH_M9206_COLD 0x9206
|
||||
#define USB_PID_DPOSH_M9206_WARM 0xa090
|
||||
@ -122,6 +124,11 @@
|
||||
#define USB_PID_AVERMEDIA_VOLAR_2 0xb808
|
||||
#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY 0x005a
|
||||
#define USB_PID_PINNACLE_PCTV2000E 0x022c
|
||||
#define USB_PID_PINNACLE_PCTV_DVB_T_FLASH 0x0228
|
||||
#define USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T 0x0229
|
||||
#define USB_PID_PCTV_200E 0x020e
|
||||
#define USB_PID_PCTV_400E 0x020f
|
||||
#define USB_PID_PCTV_450E 0x0222
|
||||
#define USB_PID_NEBULA_DIGITV 0x0201
|
||||
#define USB_PID_DVICO_BLUEBIRD_LGDT 0xd820
|
||||
#define USB_PID_DVICO_BLUEBIRD_LG064F_COLD 0xd500
|
||||
@ -141,9 +148,6 @@
|
||||
#define USB_PID_MSI_MEGASKY580_55801 0x5581
|
||||
#define USB_PID_KYE_DVB_T_COLD 0x701e
|
||||
#define USB_PID_KYE_DVB_T_WARM 0x701f
|
||||
#define USB_PID_PCTV_200E 0x020e
|
||||
#define USB_PID_PCTV_400E 0x020f
|
||||
#define USB_PID_PCTV_450E 0x0222
|
||||
#define USB_PID_LITEON_DVB_T_COLD 0xf000
|
||||
#define USB_PID_LITEON_DVB_T_WARM 0xf001
|
||||
#define USB_PID_DIGIVOX_MINI_SL_COLD 0xe360
|
||||
|
@ -344,6 +344,15 @@ config DVB_TUNER_MT2131
|
||||
help
|
||||
A driver for the silicon baseband tuner MT2131 from Microtune.
|
||||
|
||||
config DVB_TUNER_DIB0070
|
||||
tristate "DiBcom DiB0070 silicon base-band tuner"
|
||||
depends on I2C
|
||||
default m if DVB_FE_CUSTOMISE
|
||||
help
|
||||
A driver for the silicon baseband tuner DiB0070 from DiBcom.
|
||||
This device is only used inside a SiP called togther with a
|
||||
demodulator for now.
|
||||
|
||||
comment "Miscellaneous devices"
|
||||
depends on DVB_CORE
|
||||
|
||||
|
@ -41,6 +41,7 @@ obj-$(CONFIG_DVB_TDA826X) += tda826x.o
|
||||
obj-$(CONFIG_DVB_TDA827X) += tda827x.o
|
||||
obj-$(CONFIG_DVB_TUNER_MT2060) += mt2060.o
|
||||
obj-$(CONFIG_DVB_TUNER_MT2266) += mt2266.o
|
||||
obj-$(CONFIG_DVB_TUNER_DIB0070) += dib0070.o
|
||||
obj-$(CONFIG_DVB_TUNER_QT1010) += qt1010.o
|
||||
obj-$(CONFIG_DVB_TUA6100) += tua6100.o
|
||||
obj-$(CONFIG_DVB_TUNER_MT2131) += mt2131.o
|
||||
|
580
drivers/media/dvb/frontends/dib0070.c
Normal file
580
drivers/media/dvb/frontends/dib0070.c
Normal file
@ -0,0 +1,580 @@
|
||||
/*
|
||||
* Linux-DVB Driver for DiBcom's DiB0070 base-band RF Tuner.
|
||||
*
|
||||
* Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/)
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation, version 2.
|
||||
*/
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/i2c.h>
|
||||
|
||||
#include "dvb_frontend.h"
|
||||
|
||||
#include "dib0070.h"
|
||||
#include "dibx000_common.h"
|
||||
|
||||
static int debug;
|
||||
module_param(debug, int, 0644);
|
||||
MODULE_PARM_DESC(debug, "turn on debugging (default: 0)");
|
||||
|
||||
#define dprintk(args...) do { if (debug) { printk(KERN_DEBUG "DiB0070: "); printk(args); printk("\n"); } } while (0)
|
||||
|
||||
#define DIB0070_P1D 0x00
|
||||
#define DIB0070_P1F 0x01
|
||||
#define DIB0070_P1G 0x03
|
||||
#define DIB0070S_P1A 0x02
|
||||
|
||||
struct dib0070_state {
|
||||
struct i2c_adapter *i2c;
|
||||
struct dvb_frontend *fe;
|
||||
const struct dib0070_config *cfg;
|
||||
u16 wbd_ff_offset;
|
||||
u8 revision;
|
||||
};
|
||||
|
||||
static uint16_t dib0070_read_reg(struct dib0070_state *state, u8 reg)
|
||||
{
|
||||
u8 b[2];
|
||||
struct i2c_msg msg[2] = {
|
||||
{ .addr = state->cfg->i2c_address, .flags = 0, .buf = ®, .len = 1 },
|
||||
{ .addr = state->cfg->i2c_address, .flags = I2C_M_RD, .buf = b, .len = 2 },
|
||||
};
|
||||
if (i2c_transfer(state->i2c, msg, 2) != 2) {
|
||||
printk(KERN_WARNING "DiB0070 I2C read failed\n");
|
||||
return 0;
|
||||
}
|
||||
return (b[0] << 8) | b[1];
|
||||
}
|
||||
|
||||
static int dib0070_write_reg(struct dib0070_state *state, u8 reg, u16 val)
|
||||
{
|
||||
u8 b[3] = { reg, val >> 8, val & 0xff };
|
||||
struct i2c_msg msg = { .addr = state->cfg->i2c_address, .flags = 0, .buf = b, .len = 3 };
|
||||
if (i2c_transfer(state->i2c, &msg, 1) != 1) {
|
||||
printk(KERN_WARNING "DiB0070 I2C write failed\n");
|
||||
return -EREMOTEIO;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
#define HARD_RESET(state) do { if (state->cfg->reset) { state->cfg->reset(state->fe,1); msleep(10); state->cfg->reset(state->fe,0); msleep(10); } } while (0)
|
||||
|
||||
static int dib0070_set_bandwidth(struct dvb_frontend *fe, struct dvb_frontend_parameters *ch)
|
||||
{
|
||||
struct dib0070_state *st = fe->tuner_priv;
|
||||
u16 tmp = 0;
|
||||
tmp = dib0070_read_reg(st, 0x02) & 0x3fff;
|
||||
|
||||
switch(BANDWIDTH_TO_KHZ(ch->u.ofdm.bandwidth)) {
|
||||
case 8000:
|
||||
tmp |= (0 << 14);
|
||||
break;
|
||||
case 7000:
|
||||
tmp |= (1 << 14);
|
||||
break;
|
||||
case 6000:
|
||||
tmp |= (2 << 14);
|
||||
break;
|
||||
case 5000:
|
||||
default:
|
||||
tmp |= (3 << 14);
|
||||
break;
|
||||
}
|
||||
dib0070_write_reg(st, 0x02, tmp);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void dib0070_captrim(struct dib0070_state *st, u16 LO4)
|
||||
{
|
||||
int8_t captrim, fcaptrim, step_sign, step;
|
||||
u16 adc, adc_diff = 3000;
|
||||
|
||||
|
||||
|
||||
dib0070_write_reg(st, 0x0f, 0xed10);
|
||||
dib0070_write_reg(st, 0x17, 0x0034);
|
||||
|
||||
dib0070_write_reg(st, 0x18, 0x0032);
|
||||
msleep(2);
|
||||
|
||||
step = captrim = fcaptrim = 64;
|
||||
|
||||
do {
|
||||
step /= 2;
|
||||
dib0070_write_reg(st, 0x14, LO4 | captrim);
|
||||
msleep(1);
|
||||
adc = dib0070_read_reg(st, 0x19);
|
||||
|
||||
dprintk( "CAPTRIM=%hd; ADC = %hd (ADC) & %dmV", captrim, adc, (u32) adc*(u32)1800/(u32)1024);
|
||||
|
||||
if (adc >= 400) {
|
||||
adc -= 400;
|
||||
step_sign = -1;
|
||||
} else {
|
||||
adc = 400 - adc;
|
||||
step_sign = 1;
|
||||
}
|
||||
|
||||
if (adc < adc_diff) {
|
||||
dprintk( "CAPTRIM=%hd is closer to target (%hd/%hd)", captrim, adc, adc_diff);
|
||||
adc_diff = adc;
|
||||
fcaptrim = captrim;
|
||||
|
||||
|
||||
|
||||
}
|
||||
captrim += (step_sign * step);
|
||||
} while (step >= 1);
|
||||
|
||||
dib0070_write_reg(st, 0x14, LO4 | fcaptrim);
|
||||
dib0070_write_reg(st, 0x18, 0x07ff);
|
||||
}
|
||||
|
||||
#define LPF 100 // define for the loop filter 100kHz by default 16-07-06
|
||||
#define LO4_SET_VCO_HFDIV(l, v, h) l |= ((v) << 11) | ((h) << 7)
|
||||
#define LO4_SET_SD(l, s) l |= ((s) << 14) | ((s) << 12)
|
||||
#define LO4_SET_CTRIM(l, c) l |= (c) << 10
|
||||
static int dib0070_tune_digital(struct dvb_frontend *fe, struct dvb_frontend_parameters *ch)
|
||||
{
|
||||
struct dib0070_state *st = fe->tuner_priv;
|
||||
u32 freq = ch->frequency/1000 + (BAND_OF_FREQUENCY(ch->frequency/1000) == BAND_VHF ? st->cfg->freq_offset_khz_vhf : st->cfg->freq_offset_khz_uhf);
|
||||
|
||||
u8 band = BAND_OF_FREQUENCY(freq), c;
|
||||
|
||||
/*******************VCO***********************************/
|
||||
u16 lo4 = 0;
|
||||
|
||||
u8 REFDIV, PRESC = 2;
|
||||
u32 FBDiv, Rest, FREF, VCOF_kHz;
|
||||
u16 Num, Den;
|
||||
/*******************FrontEnd******************************/
|
||||
u16 value = 0;
|
||||
|
||||
dprintk( "Tuning for Band: %hd (%d kHz)", band, freq);
|
||||
|
||||
|
||||
dib0070_write_reg(st, 0x17, 0x30);
|
||||
|
||||
dib0070_set_bandwidth(fe, ch); /* c is used as HF */
|
||||
switch (st->revision) {
|
||||
case DIB0070S_P1A:
|
||||
switch (band) {
|
||||
case BAND_LBAND:
|
||||
LO4_SET_VCO_HFDIV(lo4, 1, 1);
|
||||
c = 2;
|
||||
break;
|
||||
case BAND_SBAND:
|
||||
LO4_SET_VCO_HFDIV(lo4, 0, 0);
|
||||
LO4_SET_CTRIM(lo4, 1);;
|
||||
c = 1;
|
||||
break;
|
||||
case BAND_UHF:
|
||||
default:
|
||||
if (freq < 570000) {
|
||||
LO4_SET_VCO_HFDIV(lo4, 1, 3);
|
||||
PRESC = 6; c = 6;
|
||||
} else if (freq < 680000) {
|
||||
LO4_SET_VCO_HFDIV(lo4, 0, 2);
|
||||
c = 4;
|
||||
} else {
|
||||
LO4_SET_VCO_HFDIV(lo4, 1, 2);
|
||||
c = 4;
|
||||
}
|
||||
break;
|
||||
} break;
|
||||
|
||||
case DIB0070_P1G:
|
||||
case DIB0070_P1F:
|
||||
default:
|
||||
switch (band) {
|
||||
case BAND_FM:
|
||||
LO4_SET_VCO_HFDIV(lo4, 0, 7);
|
||||
c = 24;
|
||||
break;
|
||||
case BAND_LBAND:
|
||||
LO4_SET_VCO_HFDIV(lo4, 1, 0);
|
||||
c = 2;
|
||||
break;
|
||||
case BAND_VHF:
|
||||
if (freq < 180000) {
|
||||
LO4_SET_VCO_HFDIV(lo4, 0, 3);
|
||||
c = 16;
|
||||
} else if (freq < 190000) {
|
||||
LO4_SET_VCO_HFDIV(lo4, 1, 3);
|
||||
c = 16;
|
||||
} else {
|
||||
LO4_SET_VCO_HFDIV(lo4, 0, 6);
|
||||
c = 12;
|
||||
}
|
||||
break;
|
||||
|
||||
case BAND_UHF:
|
||||
default:
|
||||
if (freq < 570000) {
|
||||
LO4_SET_VCO_HFDIV(lo4, 1, 5);
|
||||
c = 6;
|
||||
} else if (freq < 700000) {
|
||||
LO4_SET_VCO_HFDIV(lo4, 0, 1);
|
||||
c = 4;
|
||||
} else {
|
||||
LO4_SET_VCO_HFDIV(lo4, 1, 1);
|
||||
c = 4;
|
||||
}
|
||||
break;
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
dprintk( "HFDIV code: %hd", (lo4 >> 7) & 0xf);
|
||||
dprintk( "VCO = %hd", (lo4 >> 11) & 0x3);
|
||||
|
||||
|
||||
VCOF_kHz = (c * freq) * 2;
|
||||
dprintk( "VCOF in kHz: %d ((%hd*%d) << 1))",VCOF_kHz, c, freq);
|
||||
|
||||
switch (band) {
|
||||
case BAND_VHF:
|
||||
REFDIV = (u8) ((st->cfg->clock_khz + 9999) / 10000);
|
||||
break;
|
||||
case BAND_FM:
|
||||
REFDIV = (u8) ((st->cfg->clock_khz) / 1000);
|
||||
break;
|
||||
default:
|
||||
REFDIV = (u8) ( st->cfg->clock_khz / 10000);
|
||||
break;
|
||||
}
|
||||
FREF = st->cfg->clock_khz / REFDIV;
|
||||
|
||||
dprintk( "REFDIV: %hd, FREF: %d", REFDIV, FREF);
|
||||
|
||||
|
||||
|
||||
switch (st->revision) {
|
||||
case DIB0070S_P1A:
|
||||
FBDiv = (VCOF_kHz / PRESC / FREF);
|
||||
Rest = (VCOF_kHz / PRESC) - FBDiv * FREF;
|
||||
break;
|
||||
|
||||
case DIB0070_P1G:
|
||||
case DIB0070_P1F:
|
||||
default:
|
||||
FBDiv = (freq / (FREF / 2));
|
||||
Rest = 2 * freq - FBDiv * FREF;
|
||||
break;
|
||||
}
|
||||
|
||||
|
||||
if (Rest < LPF) Rest = 0;
|
||||
else if (Rest < 2 * LPF) Rest = 2 * LPF;
|
||||
else if (Rest > (FREF - LPF)) { Rest = 0 ; FBDiv += 1; }
|
||||
else if (Rest > (FREF - 2 * LPF)) Rest = FREF - 2 * LPF;
|
||||
Rest = (Rest * 6528) / (FREF / 10);
|
||||
dprintk( "FBDIV: %d, Rest: %d", FBDiv, Rest);
|
||||
|
||||
Num = 0;
|
||||
Den = 1;
|
||||
|
||||
if (Rest > 0) {
|
||||
LO4_SET_SD(lo4, 1);
|
||||
Den = 255;
|
||||
Num = (u16)Rest;
|
||||
}
|
||||
dprintk( "Num: %hd, Den: %hd, SD: %hd",Num, Den, (lo4 >> 12) & 0x1);
|
||||
|
||||
|
||||
|
||||
dib0070_write_reg(st, 0x11, (u16)FBDiv);
|
||||
|
||||
|
||||
dib0070_write_reg(st, 0x12, (Den << 8) | REFDIV);
|
||||
|
||||
|
||||
dib0070_write_reg(st, 0x13, Num);
|
||||
|
||||
|
||||
value = 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001;
|
||||
|
||||
switch (band) {
|
||||
case BAND_UHF: value |= 0x4000 | 0x0800; break;
|
||||
case BAND_LBAND: value |= 0x2000 | 0x0400; break;
|
||||
default: value |= 0x8000 | 0x1000; break;
|
||||
}
|
||||
dib0070_write_reg(st, 0x20, value);
|
||||
|
||||
dib0070_captrim(st, lo4);
|
||||
if (st->revision == DIB0070S_P1A) {
|
||||
if (band == BAND_SBAND)
|
||||
dib0070_write_reg(st, 0x15, 0x16e2);
|
||||
else
|
||||
dib0070_write_reg(st, 0x15, 0x56e5);
|
||||
}
|
||||
|
||||
|
||||
|
||||
switch (band) {
|
||||
case BAND_UHF: value = 0x7c82; break;
|
||||
case BAND_LBAND: value = 0x7c84; break;
|
||||
default: value = 0x7c81; break;
|
||||
}
|
||||
dib0070_write_reg(st, 0x0f, value);
|
||||
dib0070_write_reg(st, 0x06, 0x3fff);
|
||||
|
||||
/* Front End */
|
||||
/* c == TUNE, value = SWITCH */
|
||||
c = 0;
|
||||
value = 0;
|
||||
switch (band) {
|
||||
case BAND_FM:
|
||||
c = 0; value = 1;
|
||||
break;
|
||||
|
||||
case BAND_VHF:
|
||||
if (freq <= 180000) c = 0;
|
||||
else if (freq <= 188200) c = 1;
|
||||
else if (freq <= 196400) c = 2;
|
||||
else c = 3;
|
||||
value = 1;
|
||||
break;
|
||||
|
||||
case BAND_LBAND:
|
||||
if (freq <= 1500000) c = 0;
|
||||
else if (freq <= 1600000) c = 1;
|
||||
else c = 3;
|
||||
break;
|
||||
|
||||
case BAND_SBAND:
|
||||
c = 7;
|
||||
dib0070_write_reg(st, 0x1d,0xFFFF);
|
||||
break;
|
||||
|
||||
case BAND_UHF:
|
||||
default:
|
||||
if (st->cfg->flip_chip) {
|
||||
if (freq <= 550000) c = 0;
|
||||
else if (freq <= 590000) c = 1;
|
||||
else if (freq <= 666000) c = 3;
|
||||
else c = 5;
|
||||
} else {
|
||||
if (freq <= 550000) c = 2;
|
||||
else if (freq <= 650000) c = 3;
|
||||
else if (freq <= 750000) c = 5;
|
||||
else if (freq <= 850000) c = 6;
|
||||
else c = 7;
|
||||
}
|
||||
value = 2;
|
||||
break;
|
||||
}
|
||||
|
||||
/* default: LNA_MATCH=7, BIAS=3 */
|
||||
dib0070_write_reg(st, 0x07, (value << 11) | (7 << 8) | (c << 3) | (3 << 0));
|
||||
dib0070_write_reg(st, 0x08, (c << 10) | (3 << 7) | (127));
|
||||
dib0070_write_reg(st, 0x0d, 0x0d80);
|
||||
|
||||
|
||||
dib0070_write_reg(st, 0x18, 0x07ff);
|
||||
dib0070_write_reg(st, 0x17, 0x0033);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int dib0070_wakeup(struct dvb_frontend *fe)
|
||||
{
|
||||
struct dib0070_state *st = fe->tuner_priv;
|
||||
if (st->cfg->sleep)
|
||||
st->cfg->sleep(fe, 0);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int dib0070_sleep(struct dvb_frontend *fe)
|
||||
{
|
||||
struct dib0070_state *st = fe->tuner_priv;
|
||||
if (st->cfg->sleep)
|
||||
st->cfg->sleep(fe, 1);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static u16 dib0070_p1f_defaults[] =
|
||||
|
||||
{
|
||||
7, 0x02,
|
||||
0x0008,
|
||||
0x0000,
|
||||
0x0000,
|
||||
0x0000,
|
||||
0x0000,
|
||||
0x0002,
|
||||
0x0100,
|
||||
|
||||
3, 0x0d,
|
||||
0x0d80,
|
||||
0x0001,
|
||||
0x0000,
|
||||
|
||||
4, 0x11,
|
||||
0x0000,
|
||||
0x0103,
|
||||
0x0000,
|
||||
0x0000,
|
||||
|
||||
3, 0x16,
|
||||
0x0004 | 0x0040,
|
||||
0x0030,
|
||||
0x07ff,
|
||||
|
||||
6, 0x1b,
|
||||
0x4112,
|
||||
0xff00,
|
||||
0xc07f,
|
||||
0x0000,
|
||||
0x0180,
|
||||
0x4000 | 0x0800 | 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001,
|
||||
|
||||
0,
|
||||
};
|
||||
|
||||
static void dib0070_wbd_calibration(struct dib0070_state *state)
|
||||
{
|
||||
u16 wbd_offs;
|
||||
dib0070_write_reg(state, 0x0f, 0x6d81);
|
||||
dib0070_write_reg(state, 0x20, 0x0040 | 0x0020 | 0x0010 | 0x0008 | 0x0002 | 0x0001);
|
||||
msleep(9);
|
||||
wbd_offs = dib0070_read_reg(state, 0x19);
|
||||
dib0070_write_reg(state, 0x20, 0);
|
||||
state->wbd_ff_offset = ((wbd_offs * 8 * 18 / 33 + 1) / 2);
|
||||
dprintk( "WBDStart = %d (Vargen) - FF = %hd", (u32) wbd_offs * 1800/1024, state->wbd_ff_offset);
|
||||
}
|
||||
|
||||
u16 dib0070_wbd_offset(struct dvb_frontend *fe)
|
||||
{
|
||||
struct dib0070_state *st = fe->tuner_priv;
|
||||
return st->wbd_ff_offset;
|
||||
}
|
||||
|
||||
EXPORT_SYMBOL(dib0070_wbd_offset);
|
||||
static int dib0070_set_ctrl_lo5(struct dvb_frontend *fe, u8 vco_bias_trim, u8 hf_div_trim, u8 cp_current, u8 third_order_filt)
|
||||
{
|
||||
struct dib0070_state *state = fe->tuner_priv;
|
||||
u16 lo5 = (third_order_filt << 14) | (0 << 13) | (1 << 12) | (3 << 9) | (cp_current << 6) | (hf_div_trim << 3) | (vco_bias_trim << 0);
|
||||
dprintk( "CTRL_LO5: 0x%x", lo5);
|
||||
return dib0070_write_reg(state, 0x15, lo5);
|
||||
}
|
||||
|
||||
#define pgm_read_word(w) (*w)
|
||||
static int dib0070_reset(struct dib0070_state *state)
|
||||
{
|
||||
u16 l, r, *n;
|
||||
|
||||
HARD_RESET(state);
|
||||
|
||||
|
||||
#ifndef FORCE_SBAND_TUNER
|
||||
if ((dib0070_read_reg(state, 0x22) >> 9) & 0x1)
|
||||
state->revision = (dib0070_read_reg(state, 0x1f) >> 8) & 0xff;
|
||||
else
|
||||
#endif
|
||||
state->revision = DIB0070S_P1A;
|
||||
|
||||
/* P1F or not */
|
||||
dprintk( "Revision: %x", state->revision);
|
||||
|
||||
if (state->revision == DIB0070_P1D) {
|
||||
dprintk( "Error: this driver is not to be used meant for P1D or earlier");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
n = (u16 *) dib0070_p1f_defaults;
|
||||
l = pgm_read_word(n++);
|
||||
while (l) {
|
||||
r = pgm_read_word(n++);
|
||||
do {
|
||||
dib0070_write_reg(state, (u8)r, pgm_read_word(n++));
|
||||
r++;
|
||||
} while (--l);
|
||||
l = pgm_read_word(n++);
|
||||
}
|
||||
|
||||
if (state->cfg->force_crystal_mode != 0)
|
||||
r = state->cfg->force_crystal_mode;
|
||||
else if (state->cfg->clock_khz >= 24000)
|
||||
r = 1;
|
||||
else
|
||||
r = 2;
|
||||
|
||||
r |= state->cfg->osc_buffer_state << 3;
|
||||
|
||||
dib0070_write_reg(state, 0x10, r);
|
||||
dib0070_write_reg(state, 0x1f, (1 << 8) | ((state->cfg->clock_pad_drive & 0xf) << 4));
|
||||
|
||||
if (state->cfg->invert_iq) {
|
||||
r = dib0070_read_reg(state, 0x02) & 0xffdf;
|
||||
dib0070_write_reg(state, 0x02, r | (1 << 5));
|
||||
}
|
||||
|
||||
|
||||
if (state->revision == DIB0070S_P1A)
|
||||
dib0070_set_ctrl_lo5(state->fe, 4, 7, 3, 1);
|
||||
else
|
||||
dib0070_set_ctrl_lo5(state->fe, 4, 4, 2, 0);
|
||||
|
||||
dib0070_write_reg(state, 0x01, (54 << 9) | 0xc8);
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
static int dib0070_release(struct dvb_frontend *fe)
|
||||
{
|
||||
kfree(fe->tuner_priv);
|
||||
fe->tuner_priv = NULL;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct dvb_tuner_ops dib0070_ops = {
|
||||
.info = {
|
||||
.name = "DiBcom DiB0070",
|
||||
.frequency_min = 45000000,
|
||||
.frequency_max = 860000000,
|
||||
.frequency_step = 1000,
|
||||
},
|
||||
.release = dib0070_release,
|
||||
|
||||
.init = dib0070_wakeup,
|
||||
.sleep = dib0070_sleep,
|
||||
.set_params = dib0070_tune_digital,
|
||||
// .get_frequency = dib0070_get_frequency,
|
||||
// .get_bandwidth = dib0070_get_bandwidth
|
||||
};
|
||||
|
||||
struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg)
|
||||
{
|
||||
struct dib0070_state *state = kzalloc(sizeof(struct dib0070_state), GFP_KERNEL);
|
||||
if (state == NULL)
|
||||
return NULL;
|
||||
|
||||
state->cfg = cfg;
|
||||
state->i2c = i2c;
|
||||
state->fe = fe;
|
||||
fe->tuner_priv = state;
|
||||
|
||||
if (dib0070_reset(state) != 0)
|
||||
goto free_mem;
|
||||
|
||||
dib0070_wbd_calibration(state);
|
||||
|
||||
printk(KERN_INFO "DiB0070: successfully identified\n");
|
||||
memcpy(&fe->ops.tuner_ops, &dib0070_ops, sizeof(struct dvb_tuner_ops));
|
||||
|
||||
fe->tuner_priv = state;
|
||||
return fe;
|
||||
|
||||
free_mem:
|
||||
kfree(state);
|
||||
fe->tuner_priv = NULL;
|
||||
return NULL;
|
||||
}
|
||||
EXPORT_SYMBOL(dib0070_attach);
|
||||
|
||||
MODULE_AUTHOR("Patrick Boettcher <pboettcher@dibcom.fr>");
|
||||
MODULE_DESCRIPTION("Driver for the DiBcom 0070 base-band RF Tuner");
|
||||
MODULE_LICENSE("GPL");
|
44
drivers/media/dvb/frontends/dib0070.h
Normal file
44
drivers/media/dvb/frontends/dib0070.h
Normal file
@ -0,0 +1,44 @@
|
||||
/*
|
||||
* Linux-DVB Driver for DiBcom's DiB0070 base-band RF Tuner.
|
||||
*
|
||||
* Copyright (C) 2005-7 DiBcom (http://www.dibcom.fr/)
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation, version 2.
|
||||
*/
|
||||
#ifndef DIB0070_H
|
||||
#define DIB0070_H
|
||||
|
||||
struct dvb_frontend;
|
||||
struct i2c_adapter;
|
||||
|
||||
#define DEFAULT_DIB0070_I2C_ADDRESS 0x60
|
||||
|
||||
struct dib0070_config {
|
||||
u8 i2c_address;
|
||||
|
||||
/* tuner pins controlled externally */
|
||||
int (*reset) (struct dvb_frontend *, int);
|
||||
int (*sleep) (struct dvb_frontend *, int);
|
||||
|
||||
/* offset in kHz */
|
||||
int freq_offset_khz_uhf;
|
||||
int freq_offset_khz_vhf;
|
||||
|
||||
u8 osc_buffer_state; /* 0= normal, 1= tri-state */
|
||||
u32 clock_khz;
|
||||
u8 clock_pad_drive; /* (Drive + 1) * 2mA */
|
||||
|
||||
u8 invert_iq; /* invert Q - in case I or Q is inverted on the board */
|
||||
|
||||
u8 force_crystal_mode; /* if == 0 -> decision is made in the driver default: <24 -> 2, >=24 -> 1 */
|
||||
|
||||
u8 flip_chip;
|
||||
};
|
||||
|
||||
extern struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg);
|
||||
extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, uint8_t open);
|
||||
extern u16 dib0070_wbd_offset(struct dvb_frontend *);
|
||||
|
||||
#endif
|
@ -593,7 +593,7 @@ static int dib3000mc_tune(struct dvb_frontend *demod, struct dvb_frontend_parame
|
||||
// activates isi
|
||||
dib3000mc_write_word(state, 29, 0x1073);
|
||||
|
||||
dib3000mc_set_adp_cfg(state, (uint8_t)ch->u.ofdm.constellation);
|
||||
dib3000mc_set_adp_cfg(state, (u8)ch->u.ofdm.constellation);
|
||||
if (ch->u.ofdm.transmission_mode == TRANSMISSION_MODE_8K) {
|
||||
dib3000mc_write_word(state, 26, 38528);
|
||||
dib3000mc_write_word(state, 33, 8);
|
||||
|
@ -42,9 +42,9 @@ struct dib7000m_state {
|
||||
u32 timf_default;
|
||||
u32 internal_clk;
|
||||
|
||||
uint8_t div_force_off : 1;
|
||||
uint8_t div_state : 1;
|
||||
uint16_t div_sync_wait;
|
||||
u8 div_force_off : 1;
|
||||
u8 div_state : 1;
|
||||
u16 div_sync_wait;
|
||||
|
||||
u16 revision;
|
||||
|
||||
@ -302,7 +302,7 @@ static int dib7000m_set_diversity_in(struct dvb_frontend *demod, int onoff)
|
||||
dprintk( "diversity combination deactivated - forced by COFDM parameters");
|
||||
onoff = 0;
|
||||
}
|
||||
state->div_state = (uint8_t)onoff;
|
||||
state->div_state = (u8)onoff;
|
||||
|
||||
if (onoff) {
|
||||
dib7000m_write_word(state, 263 + state->reg_offs, 6);
|
||||
@ -620,7 +620,7 @@ static int dib7000m_update_lna(struct dib7000m_state *state)
|
||||
u16 dyn_gain;
|
||||
|
||||
if (state->cfg.update_lna) {
|
||||
// read dyn_gain here (because it is demod-dependent and not tuner)
|
||||
// read dyn_gain here (because it is demod-dependent and not fe)
|
||||
dyn_gain = dib7000m_read_word(state, 390);
|
||||
|
||||
if (state->cfg.update_lna(&state->demod,dyn_gain)) { // LNA has changed
|
||||
@ -754,7 +754,7 @@ static int dib7000m_agc_startup(struct dvb_frontend *demod, struct dvb_frontend_
|
||||
break;
|
||||
|
||||
case 3: /* split search ended */
|
||||
agc_split = (uint8_t)dib7000m_read_word(state, 392); /* store the split value for the next time */
|
||||
agc_split = (u8)dib7000m_read_word(state, 392); /* store the split value for the next time */
|
||||
dib7000m_write_word(state, 75, dib7000m_read_word(state, 390)); /* set AGC gain start value */
|
||||
|
||||
dib7000m_write_word(state, 72, cfg_72 & ~(1 << 4)); /* std AGC loop */
|
||||
|
@ -36,9 +36,9 @@ struct dib7000p_state {
|
||||
struct dibx000_agc_config *current_agc;
|
||||
u32 timf;
|
||||
|
||||
uint8_t div_force_off : 1;
|
||||
uint8_t div_state : 1;
|
||||
uint16_t div_sync_wait;
|
||||
u8 div_force_off : 1;
|
||||
u8 div_state : 1;
|
||||
u16 div_sync_wait;
|
||||
|
||||
u8 agc_state;
|
||||
|
||||
@ -156,7 +156,7 @@ static int dib7000p_set_diversity_in(struct dvb_frontend *demod, int onoff)
|
||||
dprintk( "diversity combination deactivated - forced by COFDM parameters");
|
||||
onoff = 0;
|
||||
}
|
||||
state->div_state = (uint8_t)onoff;
|
||||
state->div_state = (u8)onoff;
|
||||
|
||||
if (onoff) {
|
||||
dib7000p_write_word(state, 204, 6);
|
||||
@ -294,6 +294,16 @@ static int dib7000p_sad_calib(struct dib7000p_state *state)
|
||||
return 0;
|
||||
}
|
||||
|
||||
int dib7000p_set_wbd_ref(struct dvb_frontend *demod, u16 value)
|
||||
{
|
||||
struct dib7000p_state *state = demod->demodulator_priv;
|
||||
if (value > 4095)
|
||||
value = 4095;
|
||||
state->wbd_ref = value;
|
||||
return dib7000p_write_word(state, 105, (dib7000p_read_word(state, 105) & 0xf000) | value);
|
||||
}
|
||||
|
||||
EXPORT_SYMBOL(dib7000p_set_wbd_ref);
|
||||
static void dib7000p_reset_pll(struct dib7000p_state *state)
|
||||
{
|
||||
struct dibx000_bandwidth_config *bw = &state->cfg.bw[0];
|
||||
@ -335,6 +345,28 @@ static int dib7000p_reset_gpio(struct dib7000p_state *st)
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int dib7000p_cfg_gpio(struct dib7000p_state *st, u8 num, u8 dir, u8 val)
|
||||
{
|
||||
st->gpio_dir = dib7000p_read_word(st, 1029);
|
||||
st->gpio_dir &= ~(1 << num); /* reset the direction bit */
|
||||
st->gpio_dir |= (dir & 0x1) << num; /* set the new direction */
|
||||
dib7000p_write_word(st, 1029, st->gpio_dir);
|
||||
|
||||
st->gpio_val = dib7000p_read_word(st, 1030);
|
||||
st->gpio_val &= ~(1 << num); /* reset the direction bit */
|
||||
st->gpio_val |= (val & 0x01) << num; /* set the new value */
|
||||
dib7000p_write_word(st, 1030, st->gpio_val);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int dib7000p_set_gpio(struct dvb_frontend *demod, u8 num, u8 dir, u8 val)
|
||||
{
|
||||
struct dib7000p_state *state = demod->demodulator_priv;
|
||||
return dib7000p_cfg_gpio(state, num, dir, val);
|
||||
}
|
||||
|
||||
EXPORT_SYMBOL(dib7000p_set_gpio);
|
||||
static u16 dib7000p_defaults[] =
|
||||
|
||||
{
|
||||
@ -501,7 +533,7 @@ static int dib7000p_update_lna(struct dib7000p_state *state)
|
||||
|
||||
// when there is no LNA to program return immediatly
|
||||
if (state->cfg.update_lna) {
|
||||
// read dyn_gain here (because it is demod-dependent and not tuner)
|
||||
// read dyn_gain here (because it is demod-dependent and not fe)
|
||||
dyn_gain = dib7000p_read_word(state, 394);
|
||||
if (state->cfg.update_lna(&state->demod,dyn_gain)) { // LNA has changed
|
||||
dib7000p_restart_agc(state);
|
||||
@ -617,7 +649,7 @@ static int dib7000p_agc_startup(struct dvb_frontend *demod, struct dvb_frontend_
|
||||
break;
|
||||
|
||||
case 3: /* split search ended */
|
||||
agc_split = (uint8_t)dib7000p_read_word(state, 396); /* store the split value for the next time */
|
||||
agc_split = (u8)dib7000p_read_word(state, 396); /* store the split value for the next time */
|
||||
dib7000p_write_word(state, 78, dib7000p_read_word(state, 394)); /* set AGC gain start value */
|
||||
|
||||
dib7000p_write_word(state, 75, state->current_agc->setup); /* std AGC loop */
|
||||
|
@ -40,12 +40,7 @@ extern int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u
|
||||
|
||||
extern struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int);
|
||||
extern int dib7000pc_detection(struct i2c_adapter *i2c_adap);
|
||||
|
||||
/* TODO
|
||||
extern INT dib7000p_set_gpio(struct dibDemod *demod, UCHAR num, UCHAR dir, UCHAR val);
|
||||
extern INT dib7000p_enable_vbg_voltage(struct dibDemod *demod);
|
||||
extern void dib7000p_set_hostbus_diversity(struct dibDemod *demod, UCHAR onoff);
|
||||
extern USHORT dib7000p_get_current_agc_global(struct dibDemod *demod);
|
||||
*/
|
||||
extern int dib7000p_set_gpio(struct dvb_frontend *, u8 num, u8 dir, u8 val);
|
||||
extern int dib7000p_set_wbd_ref(struct dvb_frontend *, u16 value);
|
||||
|
||||
#endif
|
||||
|
Loading…
Reference in New Issue
Block a user