Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-01 16:41:39 +00:00
Code Issues Packages Projects Releases Wiki Activity
fa762da94d
linux/net/nfc/digital_dep.c

1644 lines
35 KiB
C
Raw Normal View History

NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
/*
* NFC Digital Protocol stack
* Copyright (c) 2013, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*/
NFC: digital: Remove PR_ERR and PR_DBG macros They can be replaced by the standard pr_err and pr_debug one after defining the right pr_fmt macro. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-20 07:05:48 +00:00
#define pr_fmt(fmt) "digital: %s: " fmt, __func__
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
#include "digital.h"
NFC: digital: Add NFC-DEP Initiator-side NACK Support When an NFC-DEP Initiator receives a frame with an incorrect CRC or with a parity error, and the frame is at least 4 bytes long, its supposed to send a NACK to the Target. The Initiator can send up to 'N(retry,nack)' consecutive NACKs where 2 <= 'N(retry,nack)' <= 5. When the limit is exceeded, a PROTOCOL EXCEPTION is raised. Any other type of transmission error is to be ignored and the Initiator should continue waiting for a new frame. This is described in section 14.12.5.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement any of this so add it. This support diverges from the spec in two significant ways: a) NACKs will be sent for ANY error reported by the driver except a timeout. This is done because there is currently no way for the digital layer to distinguish a CRC or parity error from any other type of error reported by the driver. b) All other errors will cause a PROTOCOL EXCEPTION even frames with CRC errors that are less than 4 bytes. The value chosen for 'N(retry,nack)' is 2. Targets do not send NACK PDUs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:11 +00:00
#define DIGITAL_NFC_DEP_N_RETRY_NACK 2
NFC: digital: Add NFC-DEP Initiator-side ATN Support When an NFC-DEP Initiator times out when waiting for a DEP_RES from the Target, its supposed to send an ATN to the Target. The Target should respond to the ATN with a similar ATN PDU and the Initiator can then resend the last non-ATN PDU that it sent. No more than 'N(retry,atn)' are to be send where 2 <= 'N(retry,atn)' <= 5. If the Initiator had just sent a NACK PDU when the timeout occurred, it is to continue sending NACKs until 'N(retry,nack)' NACKs have been send. This is described in section 14.12.5.6 of the NFC-DEP Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. The value chosen for 'N(retry,atn)' is 2. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:13 +00:00
#define DIGITAL_NFC_DEP_N_RETRY_ATN 2
NFC: digital: Add NFC-DEP Initiator-side NACK Support When an NFC-DEP Initiator receives a frame with an incorrect CRC or with a parity error, and the frame is at least 4 bytes long, its supposed to send a NACK to the Target. The Initiator can send up to 'N(retry,nack)' consecutive NACKs where 2 <= 'N(retry,nack)' <= 5. When the limit is exceeded, a PROTOCOL EXCEPTION is raised. Any other type of transmission error is to be ignored and the Initiator should continue waiting for a new frame. This is described in section 14.12.5.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement any of this so add it. This support diverges from the spec in two significant ways: a) NACKs will be sent for ANY error reported by the driver except a timeout. This is done because there is currently no way for the digital layer to distinguish a CRC or parity error from any other type of error reported by the driver. b) All other errors will cause a PROTOCOL EXCEPTION even frames with CRC errors that are less than 4 bytes. The value chosen for 'N(retry,nack)' is 2. Targets do not send NACK PDUs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:11 +00:00
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
#define DIGITAL_NFC_DEP_FRAME_DIR_OUT 0xD4
#define DIGITAL_NFC_DEP_FRAME_DIR_IN 0xD5
#define DIGITAL_NFC_DEP_NFCA_SOD_SB 0xF0
#define DIGITAL_CMD_ATR_REQ 0x00
#define DIGITAL_CMD_ATR_RES 0x01
#define DIGITAL_CMD_PSL_REQ 0x04
#define DIGITAL_CMD_PSL_RES 0x05
#define DIGITAL_CMD_DEP_REQ 0x06
#define DIGITAL_CMD_DEP_RES 0x07
#define DIGITAL_ATR_REQ_MIN_SIZE 16
#define DIGITAL_ATR_REQ_MAX_SIZE 64
NFC: digital: Add support for NFC DEP Response Waiting Time When sending an ATR_REQ, the initiator must wait for the ATR_RES at least 'RWT(nfcdep,activation) + dRWT(nfcdep)' and no more than 'RWT(nfcdep,activation) + dRWT(nfcdep) + dT(nfcdep,initiator)'. This gives a timeout value between 1237 ms and 1337 ms. This patch defines DIGITAL_ATR_RES_RWT to 1337 used for the timeout value of ATR_REQ command. For other DEP PDUs, the initiator must wait between 'RWT + dRWT(nfcdep)' and 'RWT + dRWT(nfcdep) + dT(nfcdep,initiator)' where RWT is given by the following formula: '(256 * 16 / f(c)) * 2^wt' where wt is the value of the TO field in the ATR_RES response and is in the range between 0 and 14. This patch declares a mapping table for wt values and gives RWT max values between 100 ms and 5049 ms. This patch also defines DIGITAL_ATR_RES_TO_WT, the maximum wt value in target mode, to 8. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:45 +00:00
#define DIGITAL_ATR_RES_TO_WT(s) ((s) & 0xF)
NFC: digital: Add Target-mode NFC-DEP DID Support When in Target mode, the Initiator specifies whether subsequent DEP_REQ and DEP_RES frames will include a DID byte by the value passed in the ATR_REQ. If the DID value in the ATR_REQ is '0' then no DID byte will be included. If the DID value is between '1' and '14' then a DID byte containing the same value must be included in subsequent DEP_REQ and DEP_RES frames. Any other DID value is invalid. This is specified in sections 14.8.1.2 and 14.8.2.2 of the NFC Digital Protocol Spec. Checking the DID value (if it should be there at all), is not currently supported by the digital layer's NFC-DEP code. Add this support by remembering the DID value in the ATR_REQ, checking the DID value of received DEP_REQ frames (if it should be there at all), and including the remembered DID value in DEP_RES frames when appropriate. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:05 +00:00
#define DIGITAL_DID_MAX 14
NFC: digital: Implement NFC-DEP max payload lengths The maximum payload for NFC-DEP exchanges (i.e., the number of bytes between SoD and EoD) is negotiated using the ATR_REQ, ATR_RES, and PSL_REQ commands. The valid maximum lengths are 64, 128, 192, and 254 bytes. Currently, NFC-DEP code assumes that both sides are always using 254 byte maximums and ignores attempts by the peer to change it. Instead, implement the negotiation code, enforce the local maximum when receiving data from the peer, and don't send payloads that exceed the remote's maximum. The default local maximum is 254 bytes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:08 +00:00
#define DIGITAL_PAYLOAD_SIZE_MAX 254
#define DIGITAL_PAYLOAD_BITS_TO_PP(s) (((s) & 0x3) << 4)
#define DIGITAL_PAYLOAD_PP_TO_BITS(s) (((s) >> 4) & 0x3)
#define DIGITAL_PAYLOAD_BITS_TO_FSL(s) ((s) & 0x3)
#define DIGITAL_PAYLOAD_FSL_TO_BITS(s) ((s) & 0x3)
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
#define DIGITAL_GB_BIT 0x02
NFC: digital: Add NFC-DEP Send Chaining Support When the NFC-DEP code is given a packet to send that is larger than the peer's maximum payload, its supposed to set the 'MI' bit in the 'I' PDU's Protocol Frame Byte (PFB). Setting this bit indicates that NFC-DEP chaining is to occur. When NFC-DEP chaining is progress, sender 'I' PDUs are acknowledged with 'ACK' PDUs until the last 'I' PDU in the chain (which has the 'MI' bit cleared) is responded to with a normal 'I' PDU. This can occur while in Initiator mode or in Target mode. Sender NFC-DEP chaining is currently not implemented in the digital layer so add that support. Unfortunately, since sending a frame may require writing the CRC to the end of the data, the relevant data part of the original skb must be copied for each intermediate frame. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:09 +00:00
#define DIGITAL_NFC_DEP_REQ_RES_HEADROOM 2 /* SoD: [SB (NFC-A)] + LEN */
#define DIGITAL_NFC_DEP_REQ_RES_TAILROOM 2 /* EoD: 2-byte CRC */
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
#define DIGITAL_NFC_DEP_PFB_TYPE(pfb) ((pfb) & 0xE0)
#define DIGITAL_NFC_DEP_PFB_TIMEOUT_BIT 0x10
NFC: digital: Add NFC-DEP Send Chaining Support When the NFC-DEP code is given a packet to send that is larger than the peer's maximum payload, its supposed to set the 'MI' bit in the 'I' PDU's Protocol Frame Byte (PFB). Setting this bit indicates that NFC-DEP chaining is to occur. When NFC-DEP chaining is progress, sender 'I' PDUs are acknowledged with 'ACK' PDUs until the last 'I' PDU in the chain (which has the 'MI' bit cleared) is responded to with a normal 'I' PDU. This can occur while in Initiator mode or in Target mode. Sender NFC-DEP chaining is currently not implemented in the digital layer so add that support. Unfortunately, since sending a frame may require writing the CRC to the end of the data, the relevant data part of the original skb must be copied for each intermediate frame. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:09 +00:00
#define DIGITAL_NFC_DEP_PFB_MI_BIT 0x10
#define DIGITAL_NFC_DEP_PFB_NACK_BIT 0x10
NFC: digital: Add Target-mode NFC-DEP DID Support When in Target mode, the Initiator specifies whether subsequent DEP_REQ and DEP_RES frames will include a DID byte by the value passed in the ATR_REQ. If the DID value in the ATR_REQ is '0' then no DID byte will be included. If the DID value is between '1' and '14' then a DID byte containing the same value must be included in subsequent DEP_REQ and DEP_RES frames. Any other DID value is invalid. This is specified in sections 14.8.1.2 and 14.8.2.2 of the NFC Digital Protocol Spec. Checking the DID value (if it should be there at all), is not currently supported by the digital layer's NFC-DEP code. Add this support by remembering the DID value in the ATR_REQ, checking the DID value of received DEP_REQ frames (if it should be there at all), and including the remembered DID value in DEP_RES frames when appropriate. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:05 +00:00
#define DIGITAL_NFC_DEP_PFB_DID_BIT 0x04
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
#define DIGITAL_NFC_DEP_PFB_IS_TIMEOUT(pfb) \
((pfb) & DIGITAL_NFC_DEP_PFB_TIMEOUT_BIT)
NFC: digital: Add NFC-DEP Send Chaining Support When the NFC-DEP code is given a packet to send that is larger than the peer's maximum payload, its supposed to set the 'MI' bit in the 'I' PDU's Protocol Frame Byte (PFB). Setting this bit indicates that NFC-DEP chaining is to occur. When NFC-DEP chaining is progress, sender 'I' PDUs are acknowledged with 'ACK' PDUs until the last 'I' PDU in the chain (which has the 'MI' bit cleared) is responded to with a normal 'I' PDU. This can occur while in Initiator mode or in Target mode. Sender NFC-DEP chaining is currently not implemented in the digital layer so add that support. Unfortunately, since sending a frame may require writing the CRC to the end of the data, the relevant data part of the original skb must be copied for each intermediate frame. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:09 +00:00
#define DIGITAL_NFC_DEP_MI_BIT_SET(pfb) ((pfb) & DIGITAL_NFC_DEP_PFB_MI_BIT)
#define DIGITAL_NFC_DEP_NACK_BIT_SET(pfb) ((pfb) & DIGITAL_NFC_DEP_PFB_NACK_BIT)
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
#define DIGITAL_NFC_DEP_NAD_BIT_SET(pfb) ((pfb) & 0x08)
NFC: digital: Add Target-mode NFC-DEP DID Support When in Target mode, the Initiator specifies whether subsequent DEP_REQ and DEP_RES frames will include a DID byte by the value passed in the ATR_REQ. If the DID value in the ATR_REQ is '0' then no DID byte will be included. If the DID value is between '1' and '14' then a DID byte containing the same value must be included in subsequent DEP_REQ and DEP_RES frames. Any other DID value is invalid. This is specified in sections 14.8.1.2 and 14.8.2.2 of the NFC Digital Protocol Spec. Checking the DID value (if it should be there at all), is not currently supported by the digital layer's NFC-DEP code. Add this support by remembering the DID value in the ATR_REQ, checking the DID value of received DEP_REQ frames (if it should be there at all), and including the remembered DID value in DEP_RES frames when appropriate. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:05 +00:00
#define DIGITAL_NFC_DEP_DID_BIT_SET(pfb) ((pfb) & DIGITAL_NFC_DEP_PFB_DID_BIT)
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
#define DIGITAL_NFC_DEP_PFB_PNI(pfb) ((pfb) & 0x03)
NFC: digital: Fix RTOX supervisor PDU handling When the target needs more time to process the received PDU, it sends Response Timeout Extension (RTOX) PDU. When the initiator receives a RTOX PDU, it must reply with a RTOX PDU and extends the current rwt value with the formula: rwt_int = rwt * rtox This patch takes care of the rtox value passed by the target in the RTOX PDU and extends the timeout for the next response accordingly. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:46 +00:00
#define DIGITAL_NFC_DEP_RTOX_VALUE(data) ((data) & 0x3F)
#define DIGITAL_NFC_DEP_RTOX_MAX 59
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
#define DIGITAL_NFC_DEP_PFB_I_PDU 0x00
#define DIGITAL_NFC_DEP_PFB_ACK_NACK_PDU 0x40
#define DIGITAL_NFC_DEP_PFB_SUPERVISOR_PDU 0x80
struct digital_atr_req {
u8 dir;
u8 cmd;
u8 nfcid3[10];
u8 did;
u8 bs;
u8 br;
u8 pp;
u8 gb[0];
} __packed;
struct digital_atr_res {
u8 dir;
u8 cmd;
u8 nfcid3[10];
u8 did;
u8 bs;
u8 br;
u8 to;
u8 pp;
u8 gb[0];
} __packed;
struct digital_psl_req {
u8 dir;
u8 cmd;
u8 did;
u8 brs;
u8 fsl;
} __packed;
struct digital_psl_res {
u8 dir;
u8 cmd;
u8 did;
} __packed;
struct digital_dep_req_res {
u8 dir;
u8 cmd;
u8 pfb;
} __packed;
static void digital_in_recv_dep_res(struct nfc_digital_dev *ddev, void *arg,
struct sk_buff *resp);
NFC: digital: Add NFC-DEP Receive Chaining Support When the peer in an NFC-DEP exchange has a packet to send that is larger than the local maximum payload, it sets the 'MI' bit in the 'I' PDU. This indicates that NFC-DEP chaining is to occur. When such a PDU is received, the local side responds with an 'ACK' PDU and this continues until the peer sends an 'I' PDU with the 'MI' bit cleared. This indicates that the chaining sequence is complete and the entire packet has been transferred. Receiving chained PDUs is currently not supported by the digital layer so add that support. When a chaining sequence is initiated by the peer, the digital layer will allocate an skb large enough to hold 8 maximum sized frame payloads. The maximum payload can range from 64 to 254 bytes so 8 * 254 = 2032 seems like a reasonable compromise between potentially wasting memory and constantly reallocating new, larger skbs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:10 +00:00
static void digital_tg_recv_dep_req(struct nfc_digital_dev *ddev, void *arg,
struct sk_buff *resp);
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
NFC: digital: Implement NFC-DEP max payload lengths The maximum payload for NFC-DEP exchanges (i.e., the number of bytes between SoD and EoD) is negotiated using the ATR_REQ, ATR_RES, and PSL_REQ commands. The valid maximum lengths are 64, 128, 192, and 254 bytes. Currently, NFC-DEP code assumes that both sides are always using 254 byte maximums and ignores attempts by the peer to change it. Instead, implement the negotiation code, enforce the local maximum when receiving data from the peer, and don't send payloads that exceed the remote's maximum. The default local maximum is 254 bytes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:08 +00:00
static const u8 digital_payload_bits_map[4] = {
[0] = 64,
[1] = 128,
[2] = 192,
[3] = 254
};
NFC: digital: Add support for NFC DEP Response Waiting Time When sending an ATR_REQ, the initiator must wait for the ATR_RES at least 'RWT(nfcdep,activation) + dRWT(nfcdep)' and no more than 'RWT(nfcdep,activation) + dRWT(nfcdep) + dT(nfcdep,initiator)'. This gives a timeout value between 1237 ms and 1337 ms. This patch defines DIGITAL_ATR_RES_RWT to 1337 used for the timeout value of ATR_REQ command. For other DEP PDUs, the initiator must wait between 'RWT + dRWT(nfcdep)' and 'RWT + dRWT(nfcdep) + dT(nfcdep,initiator)' where RWT is given by the following formula: '(256 * 16 / f(c)) * 2^wt' where wt is the value of the TO field in the ATR_RES response and is in the range between 0 and 14. This patch declares a mapping table for wt values and gives RWT max values between 100 ms and 5049 ms. This patch also defines DIGITAL_ATR_RES_TO_WT, the maximum wt value in target mode, to 8. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:45 +00:00
/* Response Waiting Time for ATR_RES PDU in ms
*
* RWT(ATR_RES) = RWT(nfcdep,activation) + dRWT(nfcdep) + dT(nfcdep,initiator)
*
* with:
* RWT(nfcdep,activation) = 4096 * 2^12 / f(c) s
* dRWT(nfcdep) = 16 / f(c) s
* dT(nfcdep,initiator) = 100 ms
* f(c) = 13560000 Hz
*/
#define DIGITAL_ATR_RES_RWT 1337
/* Response Waiting Time for other DEP PDUs in ms
*
* max_rwt = rwt + dRWT(nfcdep) + dT(nfcdep,initiator)
*
* with:
* rwt = (256 * 16 / f(c)) * 2^wt s
* dRWT(nfcdep) = 16 / f(c) s
* dT(nfcdep,initiator) = 100 ms
* f(c) = 13560000 Hz
* 0 <= wt <= 14 (given by the target by the TO field of ATR_RES response)
*/
#define DIGITAL_NFC_DEP_IN_MAX_WT 14
NFC: digital: NFC-DEP Target WT(nfcdep,max) is now 14 Version 1.1 of the NFC Forum's NFC Digital Protocol Technical Specification dated 2014-07-14 specifies that the NFC-DEP Protocol's Target WT(nfcdep,max) value is 14. In version 1.0 it was 8 so change the value in the Linux NFC-DEP Protocol code accordingly. Signed-off-by: Mark Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-06-15 17:46:16 +00:00
#define DIGITAL_NFC_DEP_TG_MAX_WT 14
NFC: digital: Add support for NFC DEP Response Waiting Time When sending an ATR_REQ, the initiator must wait for the ATR_RES at least 'RWT(nfcdep,activation) + dRWT(nfcdep)' and no more than 'RWT(nfcdep,activation) + dRWT(nfcdep) + dT(nfcdep,initiator)'. This gives a timeout value between 1237 ms and 1337 ms. This patch defines DIGITAL_ATR_RES_RWT to 1337 used for the timeout value of ATR_REQ command. For other DEP PDUs, the initiator must wait between 'RWT + dRWT(nfcdep)' and 'RWT + dRWT(nfcdep) + dT(nfcdep,initiator)' where RWT is given by the following formula: '(256 * 16 / f(c)) * 2^wt' where wt is the value of the TO field in the ATR_RES response and is in the range between 0 and 14. This patch declares a mapping table for wt values and gives RWT max values between 100 ms and 5049 ms. This patch also defines DIGITAL_ATR_RES_TO_WT, the maximum wt value in target mode, to 8. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:45 +00:00
static const u16 digital_rwt_map[DIGITAL_NFC_DEP_IN_MAX_WT + 1] = {
100, 101, 101, 102, 105,
110, 119, 139, 177, 255,
409, 719, 1337, 2575, 5049,
};
NFC: digital: Implement NFC-DEP max payload lengths The maximum payload for NFC-DEP exchanges (i.e., the number of bytes between SoD and EoD) is negotiated using the ATR_REQ, ATR_RES, and PSL_REQ commands. The valid maximum lengths are 64, 128, 192, and 254 bytes. Currently, NFC-DEP code assumes that both sides are always using 254 byte maximums and ignores attempts by the peer to change it. Instead, implement the negotiation code, enforce the local maximum when receiving data from the peer, and don't send payloads that exceed the remote's maximum. The default local maximum is 254 bytes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:08 +00:00
static u8 digital_payload_bits_to_size(u8 payload_bits)
{
if (payload_bits >= ARRAY_SIZE(digital_payload_bits_map))
return 0;
return digital_payload_bits_map[payload_bits];
}
static u8 digital_payload_size_to_bits(u8 payload_size)
{
int i;
for (i = 0; i < ARRAY_SIZE(digital_payload_bits_map); i++)
if (digital_payload_bits_map[i] == payload_size)
return i;
return 0xff;
}
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
static void digital_skb_push_dep_sod(struct nfc_digital_dev *ddev,
struct sk_buff *skb)
{
skb_push(skb, sizeof(u8));
skb->data[0] = skb->len;
if (ddev->curr_rf_tech == NFC_DIGITAL_RF_TECH_106A)
networking: make skb_push & __skb_push return void pointers It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 12:29:23 +00:00
*(u8 *)skb_push(skb, sizeof(u8)) = DIGITAL_NFC_DEP_NFCA_SOD_SB;
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
}
static int digital_skb_pull_dep_sod(struct nfc_digital_dev *ddev,
struct sk_buff *skb)
{
u8 size;
if (skb->len < 2)
return -EIO;
if (ddev->curr_rf_tech == NFC_DIGITAL_RF_TECH_106A)
skb_pull(skb, sizeof(u8));
size = skb->data[0];
if (size != skb->len)
return -EIO;
skb_pull(skb, sizeof(u8));
return 0;
}
NFC: digital: Add NFC-DEP Send Chaining Support When the NFC-DEP code is given a packet to send that is larger than the peer's maximum payload, its supposed to set the 'MI' bit in the 'I' PDU's Protocol Frame Byte (PFB). Setting this bit indicates that NFC-DEP chaining is to occur. When NFC-DEP chaining is progress, sender 'I' PDUs are acknowledged with 'ACK' PDUs until the last 'I' PDU in the chain (which has the 'MI' bit cleared) is responded to with a normal 'I' PDU. This can occur while in Initiator mode or in Target mode. Sender NFC-DEP chaining is currently not implemented in the digital layer so add that support. Unfortunately, since sending a frame may require writing the CRC to the end of the data, the relevant data part of the original skb must be copied for each intermediate frame. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:09 +00:00
static struct sk_buff *
digital_send_dep_data_prep(struct nfc_digital_dev *ddev, struct sk_buff *skb,
struct digital_dep_req_res *dep_req_res,
struct digital_data_exch *data_exch)
{
struct sk_buff *new_skb;
if (skb->len > ddev->remote_payload_max) {
dep_req_res->pfb |= DIGITAL_NFC_DEP_PFB_MI_BIT;
new_skb = digital_skb_alloc(ddev, ddev->remote_payload_max);
if (!new_skb) {
kfree_skb(ddev->chaining_skb);
ddev->chaining_skb = NULL;
return ERR_PTR(-ENOMEM);
}
networking: introduce and use skb_put_data() A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 12:29:20 +00:00
skb_put_data(new_skb, skb->data, ddev->remote_payload_max);
NFC: digital: Add NFC-DEP Send Chaining Support When the NFC-DEP code is given a packet to send that is larger than the peer's maximum payload, its supposed to set the 'MI' bit in the 'I' PDU's Protocol Frame Byte (PFB). Setting this bit indicates that NFC-DEP chaining is to occur. When NFC-DEP chaining is progress, sender 'I' PDUs are acknowledged with 'ACK' PDUs until the last 'I' PDU in the chain (which has the 'MI' bit cleared) is responded to with a normal 'I' PDU. This can occur while in Initiator mode or in Target mode. Sender NFC-DEP chaining is currently not implemented in the digital layer so add that support. Unfortunately, since sending a frame may require writing the CRC to the end of the data, the relevant data part of the original skb must be copied for each intermediate frame. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:09 +00:00
skb_pull(skb, ddev->remote_payload_max);
ddev->chaining_skb = skb;
ddev->data_exch = data_exch;
} else {
ddev->chaining_skb = NULL;
new_skb = skb;
}
return new_skb;
}
NFC: digital: Add NFC-DEP Receive Chaining Support When the peer in an NFC-DEP exchange has a packet to send that is larger than the local maximum payload, it sets the 'MI' bit in the 'I' PDU. This indicates that NFC-DEP chaining is to occur. When such a PDU is received, the local side responds with an 'ACK' PDU and this continues until the peer sends an 'I' PDU with the 'MI' bit cleared. This indicates that the chaining sequence is complete and the entire packet has been transferred. Receiving chained PDUs is currently not supported by the digital layer so add that support. When a chaining sequence is initiated by the peer, the digital layer will allocate an skb large enough to hold 8 maximum sized frame payloads. The maximum payload can range from 64 to 254 bytes so 8 * 254 = 2032 seems like a reasonable compromise between potentially wasting memory and constantly reallocating new, larger skbs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:10 +00:00
static struct sk_buff *
digital_recv_dep_data_gather(struct nfc_digital_dev *ddev, u8 pfb,
struct sk_buff *resp,
int (*send_ack)(struct nfc_digital_dev *ddev,
struct digital_data_exch
*data_exch),
struct digital_data_exch *data_exch)
{
struct sk_buff *new_skb;
int rc;
if (DIGITAL_NFC_DEP_MI_BIT_SET(pfb) && (!ddev->chaining_skb)) {
ddev->chaining_skb =
nfc_alloc_recv_skb(8 * ddev->local_payload_max,
GFP_KERNEL);
if (!ddev->chaining_skb) {
rc = -ENOMEM;
goto error;
}
}
if (ddev->chaining_skb) {
if (resp->len > skb_tailroom(ddev->chaining_skb)) {
new_skb = skb_copy_expand(ddev->chaining_skb,
skb_headroom(
ddev->chaining_skb),
8 * ddev->local_payload_max,
GFP_KERNEL);
if (!new_skb) {
rc = -ENOMEM;
goto error;
}
kfree_skb(ddev->chaining_skb);
ddev->chaining_skb = new_skb;
}
networking: introduce and use skb_put_data() A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 12:29:20 +00:00
skb_put_data(ddev->chaining_skb, resp->data, resp->len);
NFC: digital: Add NFC-DEP Receive Chaining Support When the peer in an NFC-DEP exchange has a packet to send that is larger than the local maximum payload, it sets the 'MI' bit in the 'I' PDU. This indicates that NFC-DEP chaining is to occur. When such a PDU is received, the local side responds with an 'ACK' PDU and this continues until the peer sends an 'I' PDU with the 'MI' bit cleared. This indicates that the chaining sequence is complete and the entire packet has been transferred. Receiving chained PDUs is currently not supported by the digital layer so add that support. When a chaining sequence is initiated by the peer, the digital layer will allocate an skb large enough to hold 8 maximum sized frame payloads. The maximum payload can range from 64 to 254 bytes so 8 * 254 = 2032 seems like a reasonable compromise between potentially wasting memory and constantly reallocating new, larger skbs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:10 +00:00
kfree_skb(resp);
resp = NULL;
if (DIGITAL_NFC_DEP_MI_BIT_SET(pfb)) {
rc = send_ack(ddev, data_exch);
if (rc)
goto error;
return NULL;
}
resp = ddev->chaining_skb;
ddev->chaining_skb = NULL;
}
return resp;
error:
kfree_skb(resp);
kfree_skb(ddev->chaining_skb);
ddev->chaining_skb = NULL;
return ERR_PTR(rc);
}
NFC: digital: Add Inititor-side PSL support In order to operate at the fasted bit rate possible, add initiator-side support for PSL REQ while in P2P mode. The PSL REQ will switch the RF technology to 424F whenever possible. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-07-23 03:18:01 +00:00
static void digital_in_recv_psl_res(struct nfc_digital_dev *ddev, void *arg,
struct sk_buff *resp)
{
struct nfc_target *target = arg;
struct digital_psl_res *psl_res;
int rc;
if (IS_ERR(resp)) {
rc = PTR_ERR(resp);
resp = NULL;
goto exit;
}
rc = ddev->skb_check_crc(resp);
if (rc) {
PROTOCOL_ERR("14.4.1.6");
goto exit;
}
rc = digital_skb_pull_dep_sod(ddev, resp);
if (rc) {
PROTOCOL_ERR("14.4.1.2");
goto exit;
}
psl_res = (struct digital_psl_res *)resp->data;
if ((resp->len != sizeof(*psl_res)) ||
(psl_res->dir != DIGITAL_NFC_DEP_FRAME_DIR_IN) ||
(psl_res->cmd != DIGITAL_CMD_PSL_RES)) {
rc = -EIO;
goto exit;
}
rc = digital_in_configure_hw(ddev, NFC_DIGITAL_CONFIG_RF_TECH,
NFC_DIGITAL_RF_TECH_424F);
if (rc)
goto exit;
rc = digital_in_configure_hw(ddev, NFC_DIGITAL_CONFIG_FRAMING,
NFC_DIGITAL_FRAMING_NFCF_NFC_DEP);
if (rc)
goto exit;
if (!DIGITAL_DRV_CAPS_IN_CRC(ddev) &&
(ddev->curr_rf_tech == NFC_DIGITAL_RF_TECH_106A)) {
ddev->skb_add_crc = digital_skb_add_crc_f;
ddev->skb_check_crc = digital_skb_check_crc_f;
}
ddev->curr_rf_tech = NFC_DIGITAL_RF_TECH_424F;
nfc_dep_link_is_up(ddev->nfc_dev, target->idx, NFC_COMM_ACTIVE,
NFC_RF_INITIATOR);
ddev->curr_nfc_dep_pni = 0;
exit:
dev_kfree_skb(resp);
if (rc)
ddev->curr_protocol = 0;
}
static int digital_in_send_psl_req(struct nfc_digital_dev *ddev,
struct nfc_target *target)
{
struct sk_buff *skb;
struct digital_psl_req *psl_req;
NFC: digital: Fix potential skb leaks in NFC-DEP code When digital_in_send_cmd() or digital_tg_send_cmd() fail, they do not free the skb that was passed to them so the routine that allocated the skb should free it. Currently, there are several routines in the NFC-DEP code that don't do this so make them. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:02 +00:00
int rc;
NFC: digital: Implement NFC-DEP max payload lengths The maximum payload for NFC-DEP exchanges (i.e., the number of bytes between SoD and EoD) is negotiated using the ATR_REQ, ATR_RES, and PSL_REQ commands. The valid maximum lengths are 64, 128, 192, and 254 bytes. Currently, NFC-DEP code assumes that both sides are always using 254 byte maximums and ignores attempts by the peer to change it. Instead, implement the negotiation code, enforce the local maximum when receiving data from the peer, and don't send payloads that exceed the remote's maximum. The default local maximum is 254 bytes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:08 +00:00
u8 payload_size, payload_bits;
NFC: digital: Add Inititor-side PSL support In order to operate at the fasted bit rate possible, add initiator-side support for PSL REQ while in P2P mode. The PSL REQ will switch the RF technology to 424F whenever possible. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-07-23 03:18:01 +00:00
skb = digital_skb_alloc(ddev, sizeof(*psl_req));
if (!skb)
return -ENOMEM;
skb_put(skb, sizeof(*psl_req));
psl_req = (struct digital_psl_req *)skb->data;
psl_req->dir = DIGITAL_NFC_DEP_FRAME_DIR_OUT;
psl_req->cmd = DIGITAL_CMD_PSL_REQ;
psl_req->did = 0;
psl_req->brs = (0x2 << 3) | 0x2; /* 424F both directions */
NFC: digital: Implement NFC-DEP max payload lengths The maximum payload for NFC-DEP exchanges (i.e., the number of bytes between SoD and EoD) is negotiated using the ATR_REQ, ATR_RES, and PSL_REQ commands. The valid maximum lengths are 64, 128, 192, and 254 bytes. Currently, NFC-DEP code assumes that both sides are always using 254 byte maximums and ignores attempts by the peer to change it. Instead, implement the negotiation code, enforce the local maximum when receiving data from the peer, and don't send payloads that exceed the remote's maximum. The default local maximum is 254 bytes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:08 +00:00
payload_size = min(ddev->local_payload_max, ddev->remote_payload_max);
payload_bits = digital_payload_size_to_bits(payload_size);
psl_req->fsl = DIGITAL_PAYLOAD_BITS_TO_FSL(payload_bits);
ddev->local_payload_max = payload_size;
ddev->remote_payload_max = payload_size;
NFC: digital: Add Inititor-side PSL support In order to operate at the fasted bit rate possible, add initiator-side support for PSL REQ while in P2P mode. The PSL REQ will switch the RF technology to 424F whenever possible. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-07-23 03:18:01 +00:00
digital_skb_push_dep_sod(ddev, skb);
ddev->skb_add_crc(skb);
NFC: digital: Add support for NFC DEP Response Waiting Time When sending an ATR_REQ, the initiator must wait for the ATR_RES at least 'RWT(nfcdep,activation) + dRWT(nfcdep)' and no more than 'RWT(nfcdep,activation) + dRWT(nfcdep) + dT(nfcdep,initiator)'. This gives a timeout value between 1237 ms and 1337 ms. This patch defines DIGITAL_ATR_RES_RWT to 1337 used for the timeout value of ATR_REQ command. For other DEP PDUs, the initiator must wait between 'RWT + dRWT(nfcdep)' and 'RWT + dRWT(nfcdep) + dT(nfcdep,initiator)' where RWT is given by the following formula: '(256 * 16 / f(c)) * 2^wt' where wt is the value of the TO field in the ATR_RES response and is in the range between 0 and 14. This patch declares a mapping table for wt values and gives RWT max values between 100 ms and 5049 ms. This patch also defines DIGITAL_ATR_RES_TO_WT, the maximum wt value in target mode, to 8. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:45 +00:00
rc = digital_in_send_cmd(ddev, skb, ddev->dep_rwt,
digital_in_recv_psl_res, target);
NFC: digital: Fix potential skb leaks in NFC-DEP code When digital_in_send_cmd() or digital_tg_send_cmd() fail, they do not free the skb that was passed to them so the routine that allocated the skb should free it. Currently, there are several routines in the NFC-DEP code that don't do this so make them. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:02 +00:00
if (rc)
kfree_skb(skb);
return rc;
NFC: digital: Add Inititor-side PSL support In order to operate at the fasted bit rate possible, add initiator-side support for PSL REQ while in P2P mode. The PSL REQ will switch the RF technology to 424F whenever possible. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-07-23 03:18:01 +00:00
}
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
static void digital_in_recv_atr_res(struct nfc_digital_dev *ddev, void *arg,
struct sk_buff *resp)
{
struct nfc_target *target = arg;
struct digital_atr_res *atr_res;
NFC: digital: Implement NFC-DEP max payload lengths The maximum payload for NFC-DEP exchanges (i.e., the number of bytes between SoD and EoD) is negotiated using the ATR_REQ, ATR_RES, and PSL_REQ commands. The valid maximum lengths are 64, 128, 192, and 254 bytes. Currently, NFC-DEP code assumes that both sides are always using 254 byte maximums and ignores attempts by the peer to change it. Instead, implement the negotiation code, enforce the local maximum when receiving data from the peer, and don't send payloads that exceed the remote's maximum. The default local maximum is 254 bytes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:08 +00:00
u8 gb_len, payload_bits;
NFC: digital: Add support for NFC DEP Response Waiting Time When sending an ATR_REQ, the initiator must wait for the ATR_RES at least 'RWT(nfcdep,activation) + dRWT(nfcdep)' and no more than 'RWT(nfcdep,activation) + dRWT(nfcdep) + dT(nfcdep,initiator)'. This gives a timeout value between 1237 ms and 1337 ms. This patch defines DIGITAL_ATR_RES_RWT to 1337 used for the timeout value of ATR_REQ command. For other DEP PDUs, the initiator must wait between 'RWT + dRWT(nfcdep)' and 'RWT + dRWT(nfcdep) + dT(nfcdep,initiator)' where RWT is given by the following formula: '(256 * 16 / f(c)) * 2^wt' where wt is the value of the TO field in the ATR_RES response and is in the range between 0 and 14. This patch declares a mapping table for wt values and gives RWT max values between 100 ms and 5049 ms. This patch also defines DIGITAL_ATR_RES_TO_WT, the maximum wt value in target mode, to 8. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:45 +00:00
u8 wt;
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
int rc;
if (IS_ERR(resp)) {
rc = PTR_ERR(resp);
resp = NULL;
goto exit;
}
rc = ddev->skb_check_crc(resp);
if (rc) {
PROTOCOL_ERR("14.4.1.6");
goto exit;
}
rc = digital_skb_pull_dep_sod(ddev, resp);
if (rc) {
PROTOCOL_ERR("14.4.1.2");
goto exit;
}
if (resp->len < sizeof(struct digital_atr_res)) {
rc = -EIO;
goto exit;
}
gb_len = resp->len - sizeof(struct digital_atr_res);
atr_res = (struct digital_atr_res *)resp->data;
NFC: digital: Add support for NFC DEP Response Waiting Time When sending an ATR_REQ, the initiator must wait for the ATR_RES at least 'RWT(nfcdep,activation) + dRWT(nfcdep)' and no more than 'RWT(nfcdep,activation) + dRWT(nfcdep) + dT(nfcdep,initiator)'. This gives a timeout value between 1237 ms and 1337 ms. This patch defines DIGITAL_ATR_RES_RWT to 1337 used for the timeout value of ATR_REQ command. For other DEP PDUs, the initiator must wait between 'RWT + dRWT(nfcdep)' and 'RWT + dRWT(nfcdep) + dT(nfcdep,initiator)' where RWT is given by the following formula: '(256 * 16 / f(c)) * 2^wt' where wt is the value of the TO field in the ATR_RES response and is in the range between 0 and 14. This patch declares a mapping table for wt values and gives RWT max values between 100 ms and 5049 ms. This patch also defines DIGITAL_ATR_RES_TO_WT, the maximum wt value in target mode, to 8. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:45 +00:00
wt = DIGITAL_ATR_RES_TO_WT(atr_res->to);
if (wt > DIGITAL_NFC_DEP_IN_MAX_WT)
wt = DIGITAL_NFC_DEP_IN_MAX_WT;
ddev->dep_rwt = digital_rwt_map[wt];
NFC: digital: Implement NFC-DEP max payload lengths The maximum payload for NFC-DEP exchanges (i.e., the number of bytes between SoD and EoD) is negotiated using the ATR_REQ, ATR_RES, and PSL_REQ commands. The valid maximum lengths are 64, 128, 192, and 254 bytes. Currently, NFC-DEP code assumes that both sides are always using 254 byte maximums and ignores attempts by the peer to change it. Instead, implement the negotiation code, enforce the local maximum when receiving data from the peer, and don't send payloads that exceed the remote's maximum. The default local maximum is 254 bytes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:08 +00:00
payload_bits = DIGITAL_PAYLOAD_PP_TO_BITS(atr_res->pp);
ddev->remote_payload_max = digital_payload_bits_to_size(payload_bits);
if (!ddev->remote_payload_max) {
rc = -EINVAL;
goto exit;
}
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
rc = nfc_set_remote_general_bytes(ddev->nfc_dev, atr_res->gb, gb_len);
if (rc)
goto exit;
NFC: digital: Add Inititor-side PSL support In order to operate at the fasted bit rate possible, add initiator-side support for PSL REQ while in P2P mode. The PSL REQ will switch the RF technology to 424F whenever possible. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-07-23 03:18:01 +00:00
if ((ddev->protocols & NFC_PROTO_FELICA_MASK) &&
(ddev->curr_rf_tech != NFC_DIGITAL_RF_TECH_424F)) {
rc = digital_in_send_psl_req(ddev, target);
if (!rc)
goto exit;
}
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
rc = nfc_dep_link_is_up(ddev->nfc_dev, target->idx, NFC_COMM_ACTIVE,
NFC_RF_INITIATOR);
ddev->curr_nfc_dep_pni = 0;
exit:
dev_kfree_skb(resp);
if (rc)
ddev->curr_protocol = 0;
}
int digital_in_send_atr_req(struct nfc_digital_dev *ddev,
struct nfc_target *target, __u8 comm_mode, __u8 *gb,
size_t gb_len)
{
struct sk_buff *skb;
struct digital_atr_req *atr_req;
uint size;
NFC: digital: Fix potential skb leaks in NFC-DEP code When digital_in_send_cmd() or digital_tg_send_cmd() fail, they do not free the skb that was passed to them so the routine that allocated the skb should free it. Currently, there are several routines in the NFC-DEP code that don't do this so make them. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:02 +00:00
int rc;
NFC: digital: Implement NFC-DEP max payload lengths The maximum payload for NFC-DEP exchanges (i.e., the number of bytes between SoD and EoD) is negotiated using the ATR_REQ, ATR_RES, and PSL_REQ commands. The valid maximum lengths are 64, 128, 192, and 254 bytes. Currently, NFC-DEP code assumes that both sides are always using 254 byte maximums and ignores attempts by the peer to change it. Instead, implement the negotiation code, enforce the local maximum when receiving data from the peer, and don't send payloads that exceed the remote's maximum. The default local maximum is 254 bytes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:08 +00:00
u8 payload_bits;
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
size = DIGITAL_ATR_REQ_MIN_SIZE + gb_len;
if (size > DIGITAL_ATR_REQ_MAX_SIZE) {
PROTOCOL_ERR("14.6.1.1");
return -EINVAL;
}
skb = digital_skb_alloc(ddev, size);
if (!skb)
return -ENOMEM;
skb_put(skb, sizeof(struct digital_atr_req));
atr_req = (struct digital_atr_req *)skb->data;
memset(atr_req, 0, sizeof(struct digital_atr_req));
atr_req->dir = DIGITAL_NFC_DEP_FRAME_DIR_OUT;
atr_req->cmd = DIGITAL_CMD_ATR_REQ;
if (target->nfcid2_len)
NFC: digital: Use NFC_NFCID3_MAXSIZE from nfc.h This removes the declaration of NFCID3 size in digital_dep.c and now uses the one from nfc.h. This also removes a faulty and unneeded call to max(). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-02 10:58:14 +00:00
memcpy(atr_req->nfcid3, target->nfcid2, NFC_NFCID2_MAXSIZE);
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
else
NFC: digital: Use NFC_NFCID3_MAXSIZE from nfc.h This removes the declaration of NFCID3 size in digital_dep.c and now uses the one from nfc.h. This also removes a faulty and unneeded call to max(). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-02 10:58:14 +00:00
get_random_bytes(atr_req->nfcid3, NFC_NFCID3_MAXSIZE);
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
atr_req->did = 0;
atr_req->bs = 0;
atr_req->br = 0;
NFC: digital: Implement NFC-DEP max payload lengths The maximum payload for NFC-DEP exchanges (i.e., the number of bytes between SoD and EoD) is negotiated using the ATR_REQ, ATR_RES, and PSL_REQ commands. The valid maximum lengths are 64, 128, 192, and 254 bytes. Currently, NFC-DEP code assumes that both sides are always using 254 byte maximums and ignores attempts by the peer to change it. Instead, implement the negotiation code, enforce the local maximum when receiving data from the peer, and don't send payloads that exceed the remote's maximum. The default local maximum is 254 bytes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:08 +00:00
ddev->local_payload_max = DIGITAL_PAYLOAD_SIZE_MAX;
payload_bits = digital_payload_size_to_bits(ddev->local_payload_max);
atr_req->pp = DIGITAL_PAYLOAD_BITS_TO_PP(payload_bits);
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
if (gb_len) {
atr_req->pp |= DIGITAL_GB_BIT;
networking: introduce and use skb_put_data() A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 12:29:20 +00:00
skb_put_data(skb, gb, gb_len);
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
}
digital_skb_push_dep_sod(ddev, skb);
ddev->skb_add_crc(skb);
NFC: digital: Add support for NFC DEP Response Waiting Time When sending an ATR_REQ, the initiator must wait for the ATR_RES at least 'RWT(nfcdep,activation) + dRWT(nfcdep)' and no more than 'RWT(nfcdep,activation) + dRWT(nfcdep) + dT(nfcdep,initiator)'. This gives a timeout value between 1237 ms and 1337 ms. This patch defines DIGITAL_ATR_RES_RWT to 1337 used for the timeout value of ATR_REQ command. For other DEP PDUs, the initiator must wait between 'RWT + dRWT(nfcdep)' and 'RWT + dRWT(nfcdep) + dT(nfcdep,initiator)' where RWT is given by the following formula: '(256 * 16 / f(c)) * 2^wt' where wt is the value of the TO field in the ATR_RES response and is in the range between 0 and 14. This patch declares a mapping table for wt values and gives RWT max values between 100 ms and 5049 ms. This patch also defines DIGITAL_ATR_RES_TO_WT, the maximum wt value in target mode, to 8. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:45 +00:00
rc = digital_in_send_cmd(ddev, skb, DIGITAL_ATR_RES_RWT,
digital_in_recv_atr_res, target);
NFC: digital: Fix potential skb leaks in NFC-DEP code When digital_in_send_cmd() or digital_tg_send_cmd() fail, they do not free the skb that was passed to them so the routine that allocated the skb should free it. Currently, there are several routines in the NFC-DEP code that don't do this so make them. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:02 +00:00
if (rc)
kfree_skb(skb);
return rc;
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
}
NFC: digital: Add NFC-DEP Receive Chaining Support When the peer in an NFC-DEP exchange has a packet to send that is larger than the local maximum payload, it sets the 'MI' bit in the 'I' PDU. This indicates that NFC-DEP chaining is to occur. When such a PDU is received, the local side responds with an 'ACK' PDU and this continues until the peer sends an 'I' PDU with the 'MI' bit cleared. This indicates that the chaining sequence is complete and the entire packet has been transferred. Receiving chained PDUs is currently not supported by the digital layer so add that support. When a chaining sequence is initiated by the peer, the digital layer will allocate an skb large enough to hold 8 maximum sized frame payloads. The maximum payload can range from 64 to 254 bytes so 8 * 254 = 2032 seems like a reasonable compromise between potentially wasting memory and constantly reallocating new, larger skbs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:10 +00:00
static int digital_in_send_ack(struct nfc_digital_dev *ddev,
struct digital_data_exch *data_exch)
{
struct digital_dep_req_res *dep_req;
struct sk_buff *skb;
int rc;
skb = digital_skb_alloc(ddev, 1);
if (!skb)
return -ENOMEM;
skb_push(skb, sizeof(struct digital_dep_req_res));
dep_req = (struct digital_dep_req_res *)skb->data;
dep_req->dir = DIGITAL_NFC_DEP_FRAME_DIR_OUT;
dep_req->cmd = DIGITAL_CMD_DEP_REQ;
dep_req->pfb = DIGITAL_NFC_DEP_PFB_ACK_NACK_PDU |
ddev->curr_nfc_dep_pni;
digital_skb_push_dep_sod(ddev, skb);
ddev->skb_add_crc(skb);
NFC: digital: Fix handling of saved PDU sk_buff pointers This patch fixes the way an I-PDU is saved in case it needs to be sent again. It is now copied using pskb_copy() and not simply referenced using skb_get() since it could be modified by the driver. digital_in_send_saved_skb() and digital_tg_send_saved_skb() still get a reference on the saved skb which is re-sent but release it if the send operation fails. That way the caller doesn't have to take care about skb ref in case of error. RTOX supervisor PDU must not be saved as this can override a previously saved I-PDU that should be re-sent later on. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:39 +00:00
ddev->saved_skb = pskb_copy(skb, GFP_KERNEL);
NFC: digital: Add NFC-DEP Initiator-side ATN Support When an NFC-DEP Initiator times out when waiting for a DEP_RES from the Target, its supposed to send an ATN to the Target. The Target should respond to the ATN with a similar ATN PDU and the Initiator can then resend the last non-ATN PDU that it sent. No more than 'N(retry,atn)' are to be send where 2 <= 'N(retry,atn)' <= 5. If the Initiator had just sent a NACK PDU when the timeout occurred, it is to continue sending NACKs until 'N(retry,nack)' NACKs have been send. This is described in section 14.12.5.6 of the NFC-DEP Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. The value chosen for 'N(retry,atn)' is 2. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:13 +00:00
NFC: digital: Add support for NFC DEP Response Waiting Time When sending an ATR_REQ, the initiator must wait for the ATR_RES at least 'RWT(nfcdep,activation) + dRWT(nfcdep)' and no more than 'RWT(nfcdep,activation) + dRWT(nfcdep) + dT(nfcdep,initiator)'. This gives a timeout value between 1237 ms and 1337 ms. This patch defines DIGITAL_ATR_RES_RWT to 1337 used for the timeout value of ATR_REQ command. For other DEP PDUs, the initiator must wait between 'RWT + dRWT(nfcdep)' and 'RWT + dRWT(nfcdep) + dT(nfcdep,initiator)' where RWT is given by the following formula: '(256 * 16 / f(c)) * 2^wt' where wt is the value of the TO field in the ATR_RES response and is in the range between 0 and 14. This patch declares a mapping table for wt values and gives RWT max values between 100 ms and 5049 ms. This patch also defines DIGITAL_ATR_RES_TO_WT, the maximum wt value in target mode, to 8. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:45 +00:00
rc = digital_in_send_cmd(ddev, skb, ddev->dep_rwt,
digital_in_recv_dep_res, data_exch);
NFC: digital: Add NFC-DEP Initiator-side ATN Support When an NFC-DEP Initiator times out when waiting for a DEP_RES from the Target, its supposed to send an ATN to the Target. The Target should respond to the ATN with a similar ATN PDU and the Initiator can then resend the last non-ATN PDU that it sent. No more than 'N(retry,atn)' are to be send where 2 <= 'N(retry,atn)' <= 5. If the Initiator had just sent a NACK PDU when the timeout occurred, it is to continue sending NACKs until 'N(retry,nack)' NACKs have been send. This is described in section 14.12.5.6 of the NFC-DEP Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. The value chosen for 'N(retry,atn)' is 2. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:13 +00:00
if (rc) {
NFC: digital: Add NFC-DEP Receive Chaining Support When the peer in an NFC-DEP exchange has a packet to send that is larger than the local maximum payload, it sets the 'MI' bit in the 'I' PDU. This indicates that NFC-DEP chaining is to occur. When such a PDU is received, the local side responds with an 'ACK' PDU and this continues until the peer sends an 'I' PDU with the 'MI' bit cleared. This indicates that the chaining sequence is complete and the entire packet has been transferred. Receiving chained PDUs is currently not supported by the digital layer so add that support. When a chaining sequence is initiated by the peer, the digital layer will allocate an skb large enough to hold 8 maximum sized frame payloads. The maximum payload can range from 64 to 254 bytes so 8 * 254 = 2032 seems like a reasonable compromise between potentially wasting memory and constantly reallocating new, larger skbs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:10 +00:00
kfree_skb(skb);
NFC: digital: Add NFC-DEP Initiator-side ATN Support When an NFC-DEP Initiator times out when waiting for a DEP_RES from the Target, its supposed to send an ATN to the Target. The Target should respond to the ATN with a similar ATN PDU and the Initiator can then resend the last non-ATN PDU that it sent. No more than 'N(retry,atn)' are to be send where 2 <= 'N(retry,atn)' <= 5. If the Initiator had just sent a NACK PDU when the timeout occurred, it is to continue sending NACKs until 'N(retry,nack)' NACKs have been send. This is described in section 14.12.5.6 of the NFC-DEP Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. The value chosen for 'N(retry,atn)' is 2. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:13 +00:00
kfree_skb(ddev->saved_skb);
ddev->saved_skb = NULL;
}
NFC: digital: Add NFC-DEP Receive Chaining Support When the peer in an NFC-DEP exchange has a packet to send that is larger than the local maximum payload, it sets the 'MI' bit in the 'I' PDU. This indicates that NFC-DEP chaining is to occur. When such a PDU is received, the local side responds with an 'ACK' PDU and this continues until the peer sends an 'I' PDU with the 'MI' bit cleared. This indicates that the chaining sequence is complete and the entire packet has been transferred. Receiving chained PDUs is currently not supported by the digital layer so add that support. When a chaining sequence is initiated by the peer, the digital layer will allocate an skb large enough to hold 8 maximum sized frame payloads. The maximum payload can range from 64 to 254 bytes so 8 * 254 = 2032 seems like a reasonable compromise between potentially wasting memory and constantly reallocating new, larger skbs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:10 +00:00
return rc;
}
NFC: digital: Add NFC-DEP Initiator-side NACK Support When an NFC-DEP Initiator receives a frame with an incorrect CRC or with a parity error, and the frame is at least 4 bytes long, its supposed to send a NACK to the Target. The Initiator can send up to 'N(retry,nack)' consecutive NACKs where 2 <= 'N(retry,nack)' <= 5. When the limit is exceeded, a PROTOCOL EXCEPTION is raised. Any other type of transmission error is to be ignored and the Initiator should continue waiting for a new frame. This is described in section 14.12.5.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement any of this so add it. This support diverges from the spec in two significant ways: a) NACKs will be sent for ANY error reported by the driver except a timeout. This is done because there is currently no way for the digital layer to distinguish a CRC or parity error from any other type of error reported by the driver. b) All other errors will cause a PROTOCOL EXCEPTION even frames with CRC errors that are less than 4 bytes. The value chosen for 'N(retry,nack)' is 2. Targets do not send NACK PDUs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:11 +00:00
static int digital_in_send_nack(struct nfc_digital_dev *ddev,
struct digital_data_exch *data_exch)
{
struct digital_dep_req_res *dep_req;
struct sk_buff *skb;
int rc;
skb = digital_skb_alloc(ddev, 1);
if (!skb)
return -ENOMEM;
skb_push(skb, sizeof(struct digital_dep_req_res));
dep_req = (struct digital_dep_req_res *)skb->data;
dep_req->dir = DIGITAL_NFC_DEP_FRAME_DIR_OUT;
dep_req->cmd = DIGITAL_CMD_DEP_REQ;
dep_req->pfb = DIGITAL_NFC_DEP_PFB_ACK_NACK_PDU |
DIGITAL_NFC_DEP_PFB_NACK_BIT | ddev->curr_nfc_dep_pni;
digital_skb_push_dep_sod(ddev, skb);
ddev->skb_add_crc(skb);
NFC: digital: Add support for NFC DEP Response Waiting Time When sending an ATR_REQ, the initiator must wait for the ATR_RES at least 'RWT(nfcdep,activation) + dRWT(nfcdep)' and no more than 'RWT(nfcdep,activation) + dRWT(nfcdep) + dT(nfcdep,initiator)'. This gives a timeout value between 1237 ms and 1337 ms. This patch defines DIGITAL_ATR_RES_RWT to 1337 used for the timeout value of ATR_REQ command. For other DEP PDUs, the initiator must wait between 'RWT + dRWT(nfcdep)' and 'RWT + dRWT(nfcdep) + dT(nfcdep,initiator)' where RWT is given by the following formula: '(256 * 16 / f(c)) * 2^wt' where wt is the value of the TO field in the ATR_RES response and is in the range between 0 and 14. This patch declares a mapping table for wt values and gives RWT max values between 100 ms and 5049 ms. This patch also defines DIGITAL_ATR_RES_TO_WT, the maximum wt value in target mode, to 8. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:45 +00:00
rc = digital_in_send_cmd(ddev, skb, ddev->dep_rwt,
digital_in_recv_dep_res, data_exch);
NFC: digital: Add NFC-DEP Initiator-side NACK Support When an NFC-DEP Initiator receives a frame with an incorrect CRC or with a parity error, and the frame is at least 4 bytes long, its supposed to send a NACK to the Target. The Initiator can send up to 'N(retry,nack)' consecutive NACKs where 2 <= 'N(retry,nack)' <= 5. When the limit is exceeded, a PROTOCOL EXCEPTION is raised. Any other type of transmission error is to be ignored and the Initiator should continue waiting for a new frame. This is described in section 14.12.5.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement any of this so add it. This support diverges from the spec in two significant ways: a) NACKs will be sent for ANY error reported by the driver except a timeout. This is done because there is currently no way for the digital layer to distinguish a CRC or parity error from any other type of error reported by the driver. b) All other errors will cause a PROTOCOL EXCEPTION even frames with CRC errors that are less than 4 bytes. The value chosen for 'N(retry,nack)' is 2. Targets do not send NACK PDUs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:11 +00:00
if (rc)
kfree_skb(skb);
return rc;
}
NFC: digital: Add NFC-DEP Initiator-side ATN Support When an NFC-DEP Initiator times out when waiting for a DEP_RES from the Target, its supposed to send an ATN to the Target. The Target should respond to the ATN with a similar ATN PDU and the Initiator can then resend the last non-ATN PDU that it sent. No more than 'N(retry,atn)' are to be send where 2 <= 'N(retry,atn)' <= 5. If the Initiator had just sent a NACK PDU when the timeout occurred, it is to continue sending NACKs until 'N(retry,nack)' NACKs have been send. This is described in section 14.12.5.6 of the NFC-DEP Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. The value chosen for 'N(retry,atn)' is 2. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:13 +00:00
static int digital_in_send_atn(struct nfc_digital_dev *ddev,
struct digital_data_exch *data_exch)
{
struct digital_dep_req_res *dep_req;
struct sk_buff *skb;
int rc;
skb = digital_skb_alloc(ddev, 1);
if (!skb)
return -ENOMEM;
skb_push(skb, sizeof(struct digital_dep_req_res));
dep_req = (struct digital_dep_req_res *)skb->data;
dep_req->dir = DIGITAL_NFC_DEP_FRAME_DIR_OUT;
dep_req->cmd = DIGITAL_CMD_DEP_REQ;
dep_req->pfb = DIGITAL_NFC_DEP_PFB_SUPERVISOR_PDU;
digital_skb_push_dep_sod(ddev, skb);
ddev->skb_add_crc(skb);
NFC: digital: Add support for NFC DEP Response Waiting Time When sending an ATR_REQ, the initiator must wait for the ATR_RES at least 'RWT(nfcdep,activation) + dRWT(nfcdep)' and no more than 'RWT(nfcdep,activation) + dRWT(nfcdep) + dT(nfcdep,initiator)'. This gives a timeout value between 1237 ms and 1337 ms. This patch defines DIGITAL_ATR_RES_RWT to 1337 used for the timeout value of ATR_REQ command. For other DEP PDUs, the initiator must wait between 'RWT + dRWT(nfcdep)' and 'RWT + dRWT(nfcdep) + dT(nfcdep,initiator)' where RWT is given by the following formula: '(256 * 16 / f(c)) * 2^wt' where wt is the value of the TO field in the ATR_RES response and is in the range between 0 and 14. This patch declares a mapping table for wt values and gives RWT max values between 100 ms and 5049 ms. This patch also defines DIGITAL_ATR_RES_TO_WT, the maximum wt value in target mode, to 8. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:45 +00:00
rc = digital_in_send_cmd(ddev, skb, ddev->dep_rwt,
digital_in_recv_dep_res, data_exch);
NFC: digital: Add NFC-DEP Initiator-side ATN Support When an NFC-DEP Initiator times out when waiting for a DEP_RES from the Target, its supposed to send an ATN to the Target. The Target should respond to the ATN with a similar ATN PDU and the Initiator can then resend the last non-ATN PDU that it sent. No more than 'N(retry,atn)' are to be send where 2 <= 'N(retry,atn)' <= 5. If the Initiator had just sent a NACK PDU when the timeout occurred, it is to continue sending NACKs until 'N(retry,nack)' NACKs have been send. This is described in section 14.12.5.6 of the NFC-DEP Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. The value chosen for 'N(retry,atn)' is 2. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:13 +00:00
if (rc)
kfree_skb(skb);
return rc;
}
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
static int digital_in_send_rtox(struct nfc_digital_dev *ddev,
struct digital_data_exch *data_exch, u8 rtox)
{
struct digital_dep_req_res *dep_req;
struct sk_buff *skb;
int rc;
NFC: digital: Fix RTOX supervisor PDU handling When the target needs more time to process the received PDU, it sends Response Timeout Extension (RTOX) PDU. When the initiator receives a RTOX PDU, it must reply with a RTOX PDU and extends the current rwt value with the formula: rwt_int = rwt * rtox This patch takes care of the rtox value passed by the target in the RTOX PDU and extends the timeout for the next response accordingly. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:46 +00:00
u16 rwt_int;
rwt_int = ddev->dep_rwt * rtox;
if (rwt_int > digital_rwt_map[DIGITAL_NFC_DEP_IN_MAX_WT])
rwt_int = digital_rwt_map[DIGITAL_NFC_DEP_IN_MAX_WT];
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
skb = digital_skb_alloc(ddev, 1);
if (!skb)
return -ENOMEM;
networking: add and use skb_put_u8() Joe and Bjørn suggested that it'd be nicer to not have the cast in the fairly common case of doing *(u8 *)skb_put(skb, 1) = c; Add skb_put_u8() for this case, and use it across the code, using the following spatch: @@ expression SKB, C, S; typedef u8; identifier fn = {skb_put}; fresh identifier fn2 = fn ## "_u8"; @@ - *(u8 *)fn(SKB, S) = C; + fn2(SKB, C); Note that due to the "S", the spatch isn't perfect, it should have checked that S is 1, but there's also places that use a sizeof expression like sizeof(var) or sizeof(u8) etc. Turns out that nobody ever did something like *(u8 *)skb_put(skb, 2) = c; which would be wrong anyway since the second byte wouldn't be initialized. Suggested-by: Joe Perches <joe@perches.com> Suggested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 12:29:24 +00:00
skb_put_u8(skb, rtox);
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
skb_push(skb, sizeof(struct digital_dep_req_res));
dep_req = (struct digital_dep_req_res *)skb->data;
dep_req->dir = DIGITAL_NFC_DEP_FRAME_DIR_OUT;
dep_req->cmd = DIGITAL_CMD_DEP_REQ;
dep_req->pfb = DIGITAL_NFC_DEP_PFB_SUPERVISOR_PDU |
DIGITAL_NFC_DEP_PFB_TIMEOUT_BIT;
digital_skb_push_dep_sod(ddev, skb);
ddev->skb_add_crc(skb);
NFC: digital: Fix RTOX supervisor PDU handling When the target needs more time to process the received PDU, it sends Response Timeout Extension (RTOX) PDU. When the initiator receives a RTOX PDU, it must reply with a RTOX PDU and extends the current rwt value with the formula: rwt_int = rwt * rtox This patch takes care of the rtox value passed by the target in the RTOX PDU and extends the timeout for the next response accordingly. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:46 +00:00
rc = digital_in_send_cmd(ddev, skb, rwt_int,
NFC: digital: Add support for NFC DEP Response Waiting Time When sending an ATR_REQ, the initiator must wait for the ATR_RES at least 'RWT(nfcdep,activation) + dRWT(nfcdep)' and no more than 'RWT(nfcdep,activation) + dRWT(nfcdep) + dT(nfcdep,initiator)'. This gives a timeout value between 1237 ms and 1337 ms. This patch defines DIGITAL_ATR_RES_RWT to 1337 used for the timeout value of ATR_REQ command. For other DEP PDUs, the initiator must wait between 'RWT + dRWT(nfcdep)' and 'RWT + dRWT(nfcdep) + dT(nfcdep,initiator)' where RWT is given by the following formula: '(256 * 16 / f(c)) * 2^wt' where wt is the value of the TO field in the ATR_RES response and is in the range between 0 and 14. This patch declares a mapping table for wt values and gives RWT max values between 100 ms and 5049 ms. This patch also defines DIGITAL_ATR_RES_TO_WT, the maximum wt value in target mode, to 8. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:45 +00:00
digital_in_recv_dep_res, data_exch);
NFC: digital: Fix handling of saved PDU sk_buff pointers This patch fixes the way an I-PDU is saved in case it needs to be sent again. It is now copied using pskb_copy() and not simply referenced using skb_get() since it could be modified by the driver. digital_in_send_saved_skb() and digital_tg_send_saved_skb() still get a reference on the saved skb which is re-sent but release it if the send operation fails. That way the caller doesn't have to take care about skb ref in case of error. RTOX supervisor PDU must not be saved as this can override a previously saved I-PDU that should be re-sent later on. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:39 +00:00
if (rc)
NFC: digital: Fix potential skb leaks in NFC-DEP code When digital_in_send_cmd() or digital_tg_send_cmd() fail, they do not free the skb that was passed to them so the routine that allocated the skb should free it. Currently, there are several routines in the NFC-DEP code that don't do this so make them. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:02 +00:00
kfree_skb(skb);
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
return rc;
}
NFC: digital: Add NFC-DEP Initiator-side ATN Support When an NFC-DEP Initiator times out when waiting for a DEP_RES from the Target, its supposed to send an ATN to the Target. The Target should respond to the ATN with a similar ATN PDU and the Initiator can then resend the last non-ATN PDU that it sent. No more than 'N(retry,atn)' are to be send where 2 <= 'N(retry,atn)' <= 5. If the Initiator had just sent a NACK PDU when the timeout occurred, it is to continue sending NACKs until 'N(retry,nack)' NACKs have been send. This is described in section 14.12.5.6 of the NFC-DEP Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. The value chosen for 'N(retry,atn)' is 2. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:13 +00:00
static int digital_in_send_saved_skb(struct nfc_digital_dev *ddev,
struct digital_data_exch *data_exch)
{
NFC: digital: Fix handling of saved PDU sk_buff pointers This patch fixes the way an I-PDU is saved in case it needs to be sent again. It is now copied using pskb_copy() and not simply referenced using skb_get() since it could be modified by the driver. digital_in_send_saved_skb() and digital_tg_send_saved_skb() still get a reference on the saved skb which is re-sent but release it if the send operation fails. That way the caller doesn't have to take care about skb ref in case of error. RTOX supervisor PDU must not be saved as this can override a previously saved I-PDU that should be re-sent later on. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:39 +00:00
int rc;
if (!ddev->saved_skb)
return -EINVAL;
NFC: digital: Add NFC-DEP Initiator-side ATN Support When an NFC-DEP Initiator times out when waiting for a DEP_RES from the Target, its supposed to send an ATN to the Target. The Target should respond to the ATN with a similar ATN PDU and the Initiator can then resend the last non-ATN PDU that it sent. No more than 'N(retry,atn)' are to be send where 2 <= 'N(retry,atn)' <= 5. If the Initiator had just sent a NACK PDU when the timeout occurred, it is to continue sending NACKs until 'N(retry,nack)' NACKs have been send. This is described in section 14.12.5.6 of the NFC-DEP Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. The value chosen for 'N(retry,atn)' is 2. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:13 +00:00
skb_get(ddev->saved_skb);
NFC: digital: Add support for NFC DEP Response Waiting Time When sending an ATR_REQ, the initiator must wait for the ATR_RES at least 'RWT(nfcdep,activation) + dRWT(nfcdep)' and no more than 'RWT(nfcdep,activation) + dRWT(nfcdep) + dT(nfcdep,initiator)'. This gives a timeout value between 1237 ms and 1337 ms. This patch defines DIGITAL_ATR_RES_RWT to 1337 used for the timeout value of ATR_REQ command. For other DEP PDUs, the initiator must wait between 'RWT + dRWT(nfcdep)' and 'RWT + dRWT(nfcdep) + dT(nfcdep,initiator)' where RWT is given by the following formula: '(256 * 16 / f(c)) * 2^wt' where wt is the value of the TO field in the ATR_RES response and is in the range between 0 and 14. This patch declares a mapping table for wt values and gives RWT max values between 100 ms and 5049 ms. This patch also defines DIGITAL_ATR_RES_TO_WT, the maximum wt value in target mode, to 8. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:45 +00:00
rc = digital_in_send_cmd(ddev, ddev->saved_skb, ddev->dep_rwt,
NFC: digital: Fix handling of saved PDU sk_buff pointers This patch fixes the way an I-PDU is saved in case it needs to be sent again. It is now copied using pskb_copy() and not simply referenced using skb_get() since it could be modified by the driver. digital_in_send_saved_skb() and digital_tg_send_saved_skb() still get a reference on the saved skb which is re-sent but release it if the send operation fails. That way the caller doesn't have to take care about skb ref in case of error. RTOX supervisor PDU must not be saved as this can override a previously saved I-PDU that should be re-sent later on. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:39 +00:00
digital_in_recv_dep_res, data_exch);
if (rc)
kfree_skb(ddev->saved_skb);
return rc;
NFC: digital: Add NFC-DEP Initiator-side ATN Support When an NFC-DEP Initiator times out when waiting for a DEP_RES from the Target, its supposed to send an ATN to the Target. The Target should respond to the ATN with a similar ATN PDU and the Initiator can then resend the last non-ATN PDU that it sent. No more than 'N(retry,atn)' are to be send where 2 <= 'N(retry,atn)' <= 5. If the Initiator had just sent a NACK PDU when the timeout occurred, it is to continue sending NACKs until 'N(retry,nack)' NACKs have been send. This is described in section 14.12.5.6 of the NFC-DEP Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. The value chosen for 'N(retry,atn)' is 2. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:13 +00:00
}
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
static void digital_in_recv_dep_res(struct nfc_digital_dev *ddev, void *arg,
struct sk_buff *resp)
{
struct digital_data_exch *data_exch = arg;
struct digital_dep_req_res *dep_res;
u8 pfb;
uint size;
int rc;
NFC: digital: Fix RTOX supervisor PDU handling When the target needs more time to process the received PDU, it sends Response Timeout Extension (RTOX) PDU. When the initiator receives a RTOX PDU, it must reply with a RTOX PDU and extends the current rwt value with the formula: rwt_int = rwt * rtox This patch takes care of the rtox value passed by the target in the RTOX PDU and extends the timeout for the next response accordingly. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:46 +00:00
u8 rtox;
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
if (IS_ERR(resp)) {
rc = PTR_ERR(resp);
resp = NULL;
NFC: digital: Add NFC-DEP Initiator-side NACK Support When an NFC-DEP Initiator receives a frame with an incorrect CRC or with a parity error, and the frame is at least 4 bytes long, its supposed to send a NACK to the Target. The Initiator can send up to 'N(retry,nack)' consecutive NACKs where 2 <= 'N(retry,nack)' <= 5. When the limit is exceeded, a PROTOCOL EXCEPTION is raised. Any other type of transmission error is to be ignored and the Initiator should continue waiting for a new frame. This is described in section 14.12.5.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement any of this so add it. This support diverges from the spec in two significant ways: a) NACKs will be sent for ANY error reported by the driver except a timeout. This is done because there is currently no way for the digital layer to distinguish a CRC or parity error from any other type of error reported by the driver. b) All other errors will cause a PROTOCOL EXCEPTION even frames with CRC errors that are less than 4 bytes. The value chosen for 'N(retry,nack)' is 2. Targets do not send NACK PDUs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:11 +00:00
NFC: digital: Rework error handling in DEP_RES response The Digital Protocol stack used to send a NACK frame whatever the error type it receives in digital_in_recv_dep_res(). It actually should only send a NACK frame on CRC or parity check errors or on any transmission error if a NACK frame was previously sent. Existing drivers used to send EIO error for this kind of issues so this patch limits sending of NACK frames on EIO errors. All other errors will be reported to the upper layers. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-06-16 18:24:42 +00:00
if ((rc == -EIO || (rc == -ETIMEDOUT && ddev->nack_count)) &&
NFC: digital: Add NFC-DEP Initiator-side NACK Support When an NFC-DEP Initiator receives a frame with an incorrect CRC or with a parity error, and the frame is at least 4 bytes long, its supposed to send a NACK to the Target. The Initiator can send up to 'N(retry,nack)' consecutive NACKs where 2 <= 'N(retry,nack)' <= 5. When the limit is exceeded, a PROTOCOL EXCEPTION is raised. Any other type of transmission error is to be ignored and the Initiator should continue waiting for a new frame. This is described in section 14.12.5.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement any of this so add it. This support diverges from the spec in two significant ways: a) NACKs will be sent for ANY error reported by the driver except a timeout. This is done because there is currently no way for the digital layer to distinguish a CRC or parity error from any other type of error reported by the driver. b) All other errors will cause a PROTOCOL EXCEPTION even frames with CRC errors that are less than 4 bytes. The value chosen for 'N(retry,nack)' is 2. Targets do not send NACK PDUs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:11 +00:00
(ddev->nack_count++ < DIGITAL_NFC_DEP_N_RETRY_NACK)) {
NFC: digital: Add NFC-DEP Initiator-side ATN Support When an NFC-DEP Initiator times out when waiting for a DEP_RES from the Target, its supposed to send an ATN to the Target. The Target should respond to the ATN with a similar ATN PDU and the Initiator can then resend the last non-ATN PDU that it sent. No more than 'N(retry,atn)' are to be send where 2 <= 'N(retry,atn)' <= 5. If the Initiator had just sent a NACK PDU when the timeout occurred, it is to continue sending NACKs until 'N(retry,nack)' NACKs have been send. This is described in section 14.12.5.6 of the NFC-DEP Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. The value chosen for 'N(retry,atn)' is 2. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:13 +00:00
ddev->atn_count = 0;
NFC: digital: Add NFC-DEP Initiator-side NACK Support When an NFC-DEP Initiator receives a frame with an incorrect CRC or with a parity error, and the frame is at least 4 bytes long, its supposed to send a NACK to the Target. The Initiator can send up to 'N(retry,nack)' consecutive NACKs where 2 <= 'N(retry,nack)' <= 5. When the limit is exceeded, a PROTOCOL EXCEPTION is raised. Any other type of transmission error is to be ignored and the Initiator should continue waiting for a new frame. This is described in section 14.12.5.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement any of this so add it. This support diverges from the spec in two significant ways: a) NACKs will be sent for ANY error reported by the driver except a timeout. This is done because there is currently no way for the digital layer to distinguish a CRC or parity error from any other type of error reported by the driver. b) All other errors will cause a PROTOCOL EXCEPTION even frames with CRC errors that are less than 4 bytes. The value chosen for 'N(retry,nack)' is 2. Targets do not send NACK PDUs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:11 +00:00
rc = digital_in_send_nack(ddev, data_exch);
if (rc)
goto error;
NFC: digital: Add NFC-DEP Initiator-side ATN Support When an NFC-DEP Initiator times out when waiting for a DEP_RES from the Target, its supposed to send an ATN to the Target. The Target should respond to the ATN with a similar ATN PDU and the Initiator can then resend the last non-ATN PDU that it sent. No more than 'N(retry,atn)' are to be send where 2 <= 'N(retry,atn)' <= 5. If the Initiator had just sent a NACK PDU when the timeout occurred, it is to continue sending NACKs until 'N(retry,nack)' NACKs have been send. This is described in section 14.12.5.6 of the NFC-DEP Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. The value chosen for 'N(retry,atn)' is 2. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:13 +00:00
return;
} else if ((rc == -ETIMEDOUT) &&
(ddev->atn_count++ < DIGITAL_NFC_DEP_N_RETRY_ATN)) {
ddev->nack_count = 0;
rc = digital_in_send_atn(ddev, data_exch);
if (rc)
goto error;
NFC: digital: Add NFC-DEP Initiator-side NACK Support When an NFC-DEP Initiator receives a frame with an incorrect CRC or with a parity error, and the frame is at least 4 bytes long, its supposed to send a NACK to the Target. The Initiator can send up to 'N(retry,nack)' consecutive NACKs where 2 <= 'N(retry,nack)' <= 5. When the limit is exceeded, a PROTOCOL EXCEPTION is raised. Any other type of transmission error is to be ignored and the Initiator should continue waiting for a new frame. This is described in section 14.12.5.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement any of this so add it. This support diverges from the spec in two significant ways: a) NACKs will be sent for ANY error reported by the driver except a timeout. This is done because there is currently no way for the digital layer to distinguish a CRC or parity error from any other type of error reported by the driver. b) All other errors will cause a PROTOCOL EXCEPTION even frames with CRC errors that are less than 4 bytes. The value chosen for 'N(retry,nack)' is 2. Targets do not send NACK PDUs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:11 +00:00
return;
}
goto exit;
}
rc = digital_skb_pull_dep_sod(ddev, resp);
if (rc) {
PROTOCOL_ERR("14.4.1.2");
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
goto exit;
}
rc = ddev->skb_check_crc(resp);
if (rc) {
NFC: digital: Add NFC-DEP Initiator-side NACK Support When an NFC-DEP Initiator receives a frame with an incorrect CRC or with a parity error, and the frame is at least 4 bytes long, its supposed to send a NACK to the Target. The Initiator can send up to 'N(retry,nack)' consecutive NACKs where 2 <= 'N(retry,nack)' <= 5. When the limit is exceeded, a PROTOCOL EXCEPTION is raised. Any other type of transmission error is to be ignored and the Initiator should continue waiting for a new frame. This is described in section 14.12.5.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement any of this so add it. This support diverges from the spec in two significant ways: a) NACKs will be sent for ANY error reported by the driver except a timeout. This is done because there is currently no way for the digital layer to distinguish a CRC or parity error from any other type of error reported by the driver. b) All other errors will cause a PROTOCOL EXCEPTION even frames with CRC errors that are less than 4 bytes. The value chosen for 'N(retry,nack)' is 2. Targets do not send NACK PDUs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:11 +00:00
if ((resp->len >= 4) &&
(ddev->nack_count++ < DIGITAL_NFC_DEP_N_RETRY_NACK)) {
NFC: digital: Add NFC-DEP Initiator-side ATN Support When an NFC-DEP Initiator times out when waiting for a DEP_RES from the Target, its supposed to send an ATN to the Target. The Target should respond to the ATN with a similar ATN PDU and the Initiator can then resend the last non-ATN PDU that it sent. No more than 'N(retry,atn)' are to be send where 2 <= 'N(retry,atn)' <= 5. If the Initiator had just sent a NACK PDU when the timeout occurred, it is to continue sending NACKs until 'N(retry,nack)' NACKs have been send. This is described in section 14.12.5.6 of the NFC-DEP Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. The value chosen for 'N(retry,atn)' is 2. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:13 +00:00
ddev->atn_count = 0;
NFC: digital: Add NFC-DEP Initiator-side NACK Support When an NFC-DEP Initiator receives a frame with an incorrect CRC or with a parity error, and the frame is at least 4 bytes long, its supposed to send a NACK to the Target. The Initiator can send up to 'N(retry,nack)' consecutive NACKs where 2 <= 'N(retry,nack)' <= 5. When the limit is exceeded, a PROTOCOL EXCEPTION is raised. Any other type of transmission error is to be ignored and the Initiator should continue waiting for a new frame. This is described in section 14.12.5.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement any of this so add it. This support diverges from the spec in two significant ways: a) NACKs will be sent for ANY error reported by the driver except a timeout. This is done because there is currently no way for the digital layer to distinguish a CRC or parity error from any other type of error reported by the driver. b) All other errors will cause a PROTOCOL EXCEPTION even frames with CRC errors that are less than 4 bytes. The value chosen for 'N(retry,nack)' is 2. Targets do not send NACK PDUs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:11 +00:00
rc = digital_in_send_nack(ddev, data_exch);
if (rc)
goto error;
kfree_skb(resp);
return;
}
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
PROTOCOL_ERR("14.4.1.6");
goto error;
}
NFC: digital: Add NFC-DEP Initiator-side ATN Support When an NFC-DEP Initiator times out when waiting for a DEP_RES from the Target, its supposed to send an ATN to the Target. The Target should respond to the ATN with a similar ATN PDU and the Initiator can then resend the last non-ATN PDU that it sent. No more than 'N(retry,atn)' are to be send where 2 <= 'N(retry,atn)' <= 5. If the Initiator had just sent a NACK PDU when the timeout occurred, it is to continue sending NACKs until 'N(retry,nack)' NACKs have been send. This is described in section 14.12.5.6 of the NFC-DEP Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. The value chosen for 'N(retry,atn)' is 2. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:13 +00:00
ddev->atn_count = 0;
NFC: digital: Add NFC-DEP Initiator-side NACK Support When an NFC-DEP Initiator receives a frame with an incorrect CRC or with a parity error, and the frame is at least 4 bytes long, its supposed to send a NACK to the Target. The Initiator can send up to 'N(retry,nack)' consecutive NACKs where 2 <= 'N(retry,nack)' <= 5. When the limit is exceeded, a PROTOCOL EXCEPTION is raised. Any other type of transmission error is to be ignored and the Initiator should continue waiting for a new frame. This is described in section 14.12.5.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement any of this so add it. This support diverges from the spec in two significant ways: a) NACKs will be sent for ANY error reported by the driver except a timeout. This is done because there is currently no way for the digital layer to distinguish a CRC or parity error from any other type of error reported by the driver. b) All other errors will cause a PROTOCOL EXCEPTION even frames with CRC errors that are less than 4 bytes. The value chosen for 'N(retry,nack)' is 2. Targets do not send NACK PDUs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:11 +00:00
ddev->nack_count = 0;
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
NFC: digital: Implement NFC-DEP max payload lengths The maximum payload for NFC-DEP exchanges (i.e., the number of bytes between SoD and EoD) is negotiated using the ATR_REQ, ATR_RES, and PSL_REQ commands. The valid maximum lengths are 64, 128, 192, and 254 bytes. Currently, NFC-DEP code assumes that both sides are always using 254 byte maximums and ignores attempts by the peer to change it. Instead, implement the negotiation code, enforce the local maximum when receiving data from the peer, and don't send payloads that exceed the remote's maximum. The default local maximum is 254 bytes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:08 +00:00
if (resp->len > ddev->local_payload_max) {
rc = -EMSGSIZE;
goto exit;
}
NFC: digital: Rearrange NFC-DEP DEP_REQ/DEP_RES Code Rearrange some of the code in digital_in_recv_dep_res() and digital_tg_recv_dep_req() so the initial code looks similar. The real reason is prepare the code for some upcoming patches that require these changes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:03 +00:00
size = sizeof(struct digital_dep_req_res);
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
dep_res = (struct digital_dep_req_res *)resp->data;
NFC: digital: Rearrange NFC-DEP DEP_REQ/DEP_RES Code Rearrange some of the code in digital_in_recv_dep_res() and digital_tg_recv_dep_req() so the initial code looks similar. The real reason is prepare the code for some upcoming patches that require these changes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:03 +00:00
if (resp->len < size || dep_res->dir != DIGITAL_NFC_DEP_FRAME_DIR_IN ||
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
dep_res->cmd != DIGITAL_CMD_DEP_RES) {
rc = -EIO;
goto error;
}
pfb = dep_res->pfb;
NFC: digital: Ensure no DID in NFC-DEP responses When in Initiator mode, the digital layer's NFC-DEP code always sets the Device ID (DID) value in the ATR_REQ to '0'. This means that subsequent DEP_REQ and DEP_RES frames must never include a DID byte. This is specified in sections 14.8.1.1 and 14.8.2.1 of the NFC Digital Protocol Spec. Currently, the digital layer's NFC-DEP code doesn't enforce this rule so add code to ensure that there is no DID byte in DEP_RES frames. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:04 +00:00
if (DIGITAL_NFC_DEP_DID_BIT_SET(pfb)) {
PROTOCOL_ERR("14.8.2.1");
rc = -EIO;
goto error;
}
NFC: digital: Rearrange NFC-DEP DEP_REQ/DEP_RES Code Rearrange some of the code in digital_in_recv_dep_res() and digital_tg_recv_dep_req() so the initial code looks similar. The real reason is prepare the code for some upcoming patches that require these changes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:03 +00:00
NFC: digital: Ensure no NAD byte in DEP_REQ and DEP_RES frames According to chapter 14 of the NFC-DEP Digital Protocol Spec., the NAD byte should never be present in DEP_REQ or DEP_RES frames. However, this is not enforced so add that enforcement code. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:06 +00:00
if (DIGITAL_NFC_DEP_NAD_BIT_SET(pfb)) {
rc = -EIO;
goto exit;
}
NFC: digital: Rearrange NFC-DEP DEP_REQ/DEP_RES Code Rearrange some of the code in digital_in_recv_dep_res() and digital_tg_recv_dep_req() so the initial code looks similar. The real reason is prepare the code for some upcoming patches that require these changes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:03 +00:00
if (size > resp->len) {
rc = -EIO;
goto error;
}
skb_pull(resp, size);
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
switch (DIGITAL_NFC_DEP_PFB_TYPE(pfb)) {
case DIGITAL_NFC_DEP_PFB_I_PDU:
if (DIGITAL_NFC_DEP_PFB_PNI(pfb) != ddev->curr_nfc_dep_pni) {
PROTOCOL_ERR("14.12.3.3");
rc = -EIO;
goto error;
}
ddev->curr_nfc_dep_pni =
DIGITAL_NFC_DEP_PFB_PNI(ddev->curr_nfc_dep_pni + 1);
NFC: digital: Add NFC-DEP Receive Chaining Support When the peer in an NFC-DEP exchange has a packet to send that is larger than the local maximum payload, it sets the 'MI' bit in the 'I' PDU. This indicates that NFC-DEP chaining is to occur. When such a PDU is received, the local side responds with an 'ACK' PDU and this continues until the peer sends an 'I' PDU with the 'MI' bit cleared. This indicates that the chaining sequence is complete and the entire packet has been transferred. Receiving chained PDUs is currently not supported by the digital layer so add that support. When a chaining sequence is initiated by the peer, the digital layer will allocate an skb large enough to hold 8 maximum sized frame payloads. The maximum payload can range from 64 to 254 bytes so 8 * 254 = 2032 seems like a reasonable compromise between potentially wasting memory and constantly reallocating new, larger skbs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:10 +00:00
NFC: digital: Add NFC-DEP Initiator-side ATN Support When an NFC-DEP Initiator times out when waiting for a DEP_RES from the Target, its supposed to send an ATN to the Target. The Target should respond to the ATN with a similar ATN PDU and the Initiator can then resend the last non-ATN PDU that it sent. No more than 'N(retry,atn)' are to be send where 2 <= 'N(retry,atn)' <= 5. If the Initiator had just sent a NACK PDU when the timeout occurred, it is to continue sending NACKs until 'N(retry,nack)' NACKs have been send. This is described in section 14.12.5.6 of the NFC-DEP Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. The value chosen for 'N(retry,atn)' is 2. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:13 +00:00
kfree_skb(ddev->saved_skb);
ddev->saved_skb = NULL;
NFC: digital: Add NFC-DEP Receive Chaining Support When the peer in an NFC-DEP exchange has a packet to send that is larger than the local maximum payload, it sets the 'MI' bit in the 'I' PDU. This indicates that NFC-DEP chaining is to occur. When such a PDU is received, the local side responds with an 'ACK' PDU and this continues until the peer sends an 'I' PDU with the 'MI' bit cleared. This indicates that the chaining sequence is complete and the entire packet has been transferred. Receiving chained PDUs is currently not supported by the digital layer so add that support. When a chaining sequence is initiated by the peer, the digital layer will allocate an skb large enough to hold 8 maximum sized frame payloads. The maximum payload can range from 64 to 254 bytes so 8 * 254 = 2032 seems like a reasonable compromise between potentially wasting memory and constantly reallocating new, larger skbs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:10 +00:00
resp = digital_recv_dep_data_gather(ddev, pfb, resp,
digital_in_send_ack,
data_exch);
if (IS_ERR(resp)) {
rc = PTR_ERR(resp);
resp = NULL;
goto error;
}
/* If resp is NULL then we're still chaining so return and
* wait for the next part of the PDU. Else, the PDU is
* complete so pass it up.
*/
if (!resp)
return;
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
rc = 0;
break;
case DIGITAL_NFC_DEP_PFB_ACK_NACK_PDU:
NFC: digital: Rework ACK PDU handling in initiator mode With this patch, ACK PDU sk_buffs are now freed and code has been refactored for better errors handling. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:43 +00:00
if (DIGITAL_NFC_DEP_NACK_BIT_SET(pfb)) {
PROTOCOL_ERR("14.12.4.5");
rc = -EIO;
goto exit;
}
NFC: digital: Enforce NFC-DEP PNI sequencing NFC-DEP DEP_REQ and DEP_RES exchanges using 'I' and 'ACK/NACK' PDUs have a sequence number called the Packet Number Information (PNI). The PNI is incremented (modulo 4) after every DEP_REQ/ DEP_RES pair and should be verified by the digital layer code. That verification isn't always done, though, so add code to make sure that it is done. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:07 +00:00
if (DIGITAL_NFC_DEP_PFB_PNI(pfb) != ddev->curr_nfc_dep_pni) {
PROTOCOL_ERR("14.12.3.3");
rc = -EIO;
goto exit;
}
ddev->curr_nfc_dep_pni =
DIGITAL_NFC_DEP_PFB_PNI(ddev->curr_nfc_dep_pni + 1);
NFC: digital: Rework ACK PDU handling in initiator mode With this patch, ACK PDU sk_buffs are now freed and code has been refactored for better errors handling. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:43 +00:00
if (!ddev->chaining_skb) {
PROTOCOL_ERR("14.12.4.3");
rc = -EIO;
goto exit;
}
NFC: digital: Add NFC-DEP Initiator-side ATN Support When an NFC-DEP Initiator times out when waiting for a DEP_RES from the Target, its supposed to send an ATN to the Target. The Target should respond to the ATN with a similar ATN PDU and the Initiator can then resend the last non-ATN PDU that it sent. No more than 'N(retry,atn)' are to be send where 2 <= 'N(retry,atn)' <= 5. If the Initiator had just sent a NACK PDU when the timeout occurred, it is to continue sending NACKs until 'N(retry,nack)' NACKs have been send. This is described in section 14.12.5.6 of the NFC-DEP Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. The value chosen for 'N(retry,atn)' is 2. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:13 +00:00
NFC: digital: Rework ACK PDU handling in initiator mode With this patch, ACK PDU sk_buffs are now freed and code has been refactored for better errors handling. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:43 +00:00
/* The initiator has received a valid ACK. Free the last sent
* PDU and keep on sending chained skb.
*/
kfree_skb(ddev->saved_skb);
ddev->saved_skb = NULL;
NFC: digital: Add NFC-DEP Send Chaining Support When the NFC-DEP code is given a packet to send that is larger than the peer's maximum payload, its supposed to set the 'MI' bit in the 'I' PDU's Protocol Frame Byte (PFB). Setting this bit indicates that NFC-DEP chaining is to occur. When NFC-DEP chaining is progress, sender 'I' PDUs are acknowledged with 'ACK' PDUs until the last 'I' PDU in the chain (which has the 'MI' bit cleared) is responded to with a normal 'I' PDU. This can occur while in Initiator mode or in Target mode. Sender NFC-DEP chaining is currently not implemented in the digital layer so add that support. Unfortunately, since sending a frame may require writing the CRC to the end of the data, the relevant data part of the original skb must be copied for each intermediate frame. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:09 +00:00
NFC: digital: Rework ACK PDU handling in initiator mode With this patch, ACK PDU sk_buffs are now freed and code has been refactored for better errors handling. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:43 +00:00
rc = digital_in_send_dep_req(ddev, NULL,
ddev->chaining_skb,
ddev->data_exch);
if (rc)
goto error;
NFC: digital: Add NFC-DEP Send Chaining Support When the NFC-DEP code is given a packet to send that is larger than the peer's maximum payload, its supposed to set the 'MI' bit in the 'I' PDU's Protocol Frame Byte (PFB). Setting this bit indicates that NFC-DEP chaining is to occur. When NFC-DEP chaining is progress, sender 'I' PDUs are acknowledged with 'ACK' PDUs until the last 'I' PDU in the chain (which has the 'MI' bit cleared) is responded to with a normal 'I' PDU. This can occur while in Initiator mode or in Target mode. Sender NFC-DEP chaining is currently not implemented in the digital layer so add that support. Unfortunately, since sending a frame may require writing the CRC to the end of the data, the relevant data part of the original skb must be copied for each intermediate frame. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:09 +00:00
NFC: digital: Rework ACK PDU handling in initiator mode With this patch, ACK PDU sk_buffs are now freed and code has been refactored for better errors handling. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:43 +00:00
goto free_resp;
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
case DIGITAL_NFC_DEP_PFB_SUPERVISOR_PDU:
NFC: digital: Add NFC-DEP Initiator-side ATN Support When an NFC-DEP Initiator times out when waiting for a DEP_RES from the Target, its supposed to send an ATN to the Target. The Target should respond to the ATN with a similar ATN PDU and the Initiator can then resend the last non-ATN PDU that it sent. No more than 'N(retry,atn)' are to be send where 2 <= 'N(retry,atn)' <= 5. If the Initiator had just sent a NACK PDU when the timeout occurred, it is to continue sending NACKs until 'N(retry,nack)' NACKs have been send. This is described in section 14.12.5.6 of the NFC-DEP Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. The value chosen for 'N(retry,atn)' is 2. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:13 +00:00
if (!DIGITAL_NFC_DEP_PFB_IS_TIMEOUT(pfb)) { /* ATN */
rc = digital_in_send_saved_skb(ddev, data_exch);
NFC: digital: Fix handling of saved PDU sk_buff pointers This patch fixes the way an I-PDU is saved in case it needs to be sent again. It is now copied using pskb_copy() and not simply referenced using skb_get() since it could be modified by the driver. digital_in_send_saved_skb() and digital_tg_send_saved_skb() still get a reference on the saved skb which is re-sent but release it if the send operation fails. That way the caller doesn't have to take care about skb ref in case of error. RTOX supervisor PDU must not be saved as this can override a previously saved I-PDU that should be re-sent later on. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:39 +00:00
if (rc)
NFC: digital: Add NFC-DEP Initiator-side ATN Support When an NFC-DEP Initiator times out when waiting for a DEP_RES from the Target, its supposed to send an ATN to the Target. The Target should respond to the ATN with a similar ATN PDU and the Initiator can then resend the last non-ATN PDU that it sent. No more than 'N(retry,atn)' are to be send where 2 <= 'N(retry,atn)' <= 5. If the Initiator had just sent a NACK PDU when the timeout occurred, it is to continue sending NACKs until 'N(retry,nack)' NACKs have been send. This is described in section 14.12.5.6 of the NFC-DEP Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. The value chosen for 'N(retry,atn)' is 2. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:13 +00:00
goto error;
NFC: digital: Free supervisor PDUs This patch frees the RTOX resp sk_buff in initiator mode. It also makes use of the free_resp exit point for ATN supervisor PDUs in both initiator and target mode. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:44 +00:00
goto free_resp;
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
}
NFC: digital: Fix RTOX supervisor PDU handling When the target needs more time to process the received PDU, it sends Response Timeout Extension (RTOX) PDU. When the initiator receives a RTOX PDU, it must reply with a RTOX PDU and extends the current rwt value with the formula: rwt_int = rwt * rtox This patch takes care of the rtox value passed by the target in the RTOX PDU and extends the timeout for the next response accordingly. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:46 +00:00
if (ddev->atn_count || ddev->nack_count) {
PROTOCOL_ERR("14.12.4.4");
rc = -EIO;
goto error;
}
rtox = DIGITAL_NFC_DEP_RTOX_VALUE(resp->data[0]);
if (!rtox || rtox > DIGITAL_NFC_DEP_RTOX_MAX) {
PROTOCOL_ERR("14.8.4.1");
rc = -EIO;
goto error;
}
rc = digital_in_send_rtox(ddev, data_exch, rtox);
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
if (rc)
goto error;
NFC: digital: Free supervisor PDUs This patch frees the RTOX resp sk_buff in initiator mode. It also makes use of the free_resp exit point for ATN supervisor PDUs in both initiator and target mode. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:44 +00:00
goto free_resp;
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
}
exit:
data_exch->cb(data_exch->cb_context, resp, rc);
error:
kfree(data_exch);
NFC: digital: Add NFC-DEP Send Chaining Support When the NFC-DEP code is given a packet to send that is larger than the peer's maximum payload, its supposed to set the 'MI' bit in the 'I' PDU's Protocol Frame Byte (PFB). Setting this bit indicates that NFC-DEP chaining is to occur. When NFC-DEP chaining is progress, sender 'I' PDUs are acknowledged with 'ACK' PDUs until the last 'I' PDU in the chain (which has the 'MI' bit cleared) is responded to with a normal 'I' PDU. This can occur while in Initiator mode or in Target mode. Sender NFC-DEP chaining is currently not implemented in the digital layer so add that support. Unfortunately, since sending a frame may require writing the CRC to the end of the data, the relevant data part of the original skb must be copied for each intermediate frame. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:09 +00:00
kfree_skb(ddev->chaining_skb);
ddev->chaining_skb = NULL;
NFC: digital: Add NFC-DEP Initiator-side ATN Support When an NFC-DEP Initiator times out when waiting for a DEP_RES from the Target, its supposed to send an ATN to the Target. The Target should respond to the ATN with a similar ATN PDU and the Initiator can then resend the last non-ATN PDU that it sent. No more than 'N(retry,atn)' are to be send where 2 <= 'N(retry,atn)' <= 5. If the Initiator had just sent a NACK PDU when the timeout occurred, it is to continue sending NACKs until 'N(retry,nack)' NACKs have been send. This is described in section 14.12.5.6 of the NFC-DEP Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. The value chosen for 'N(retry,atn)' is 2. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:13 +00:00
kfree_skb(ddev->saved_skb);
ddev->saved_skb = NULL;
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
if (rc)
kfree_skb(resp);
NFC: digital: Rework ACK PDU handling in initiator mode With this patch, ACK PDU sk_buffs are now freed and code has been refactored for better errors handling. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:43 +00:00
return;
free_resp:
dev_kfree_skb(resp);
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
}
int digital_in_send_dep_req(struct nfc_digital_dev *ddev,
struct nfc_target *target, struct sk_buff *skb,
struct digital_data_exch *data_exch)
{
struct digital_dep_req_res *dep_req;
NFC: digital: Add NFC-DEP Send Chaining Support When the NFC-DEP code is given a packet to send that is larger than the peer's maximum payload, its supposed to set the 'MI' bit in the 'I' PDU's Protocol Frame Byte (PFB). Setting this bit indicates that NFC-DEP chaining is to occur. When NFC-DEP chaining is progress, sender 'I' PDUs are acknowledged with 'ACK' PDUs until the last 'I' PDU in the chain (which has the 'MI' bit cleared) is responded to with a normal 'I' PDU. This can occur while in Initiator mode or in Target mode. Sender NFC-DEP chaining is currently not implemented in the digital layer so add that support. Unfortunately, since sending a frame may require writing the CRC to the end of the data, the relevant data part of the original skb must be copied for each intermediate frame. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:09 +00:00
struct sk_buff *chaining_skb, *tmp_skb;
int rc;
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
skb_push(skb, sizeof(struct digital_dep_req_res));
dep_req = (struct digital_dep_req_res *)skb->data;
NFC: digital: Add NFC-DEP Send Chaining Support When the NFC-DEP code is given a packet to send that is larger than the peer's maximum payload, its supposed to set the 'MI' bit in the 'I' PDU's Protocol Frame Byte (PFB). Setting this bit indicates that NFC-DEP chaining is to occur. When NFC-DEP chaining is progress, sender 'I' PDUs are acknowledged with 'ACK' PDUs until the last 'I' PDU in the chain (which has the 'MI' bit cleared) is responded to with a normal 'I' PDU. This can occur while in Initiator mode or in Target mode. Sender NFC-DEP chaining is currently not implemented in the digital layer so add that support. Unfortunately, since sending a frame may require writing the CRC to the end of the data, the relevant data part of the original skb must be copied for each intermediate frame. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:09 +00:00
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
dep_req->dir = DIGITAL_NFC_DEP_FRAME_DIR_OUT;
dep_req->cmd = DIGITAL_CMD_DEP_REQ;
dep_req->pfb = ddev->curr_nfc_dep_pni;
NFC: digital: Add NFC-DEP Initiator-side ATN Support When an NFC-DEP Initiator times out when waiting for a DEP_RES from the Target, its supposed to send an ATN to the Target. The Target should respond to the ATN with a similar ATN PDU and the Initiator can then resend the last non-ATN PDU that it sent. No more than 'N(retry,atn)' are to be send where 2 <= 'N(retry,atn)' <= 5. If the Initiator had just sent a NACK PDU when the timeout occurred, it is to continue sending NACKs until 'N(retry,nack)' NACKs have been send. This is described in section 14.12.5.6 of the NFC-DEP Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. The value chosen for 'N(retry,atn)' is 2. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:13 +00:00
ddev->atn_count = 0;
NFC: digital: Add NFC-DEP Initiator-side NACK Support When an NFC-DEP Initiator receives a frame with an incorrect CRC or with a parity error, and the frame is at least 4 bytes long, its supposed to send a NACK to the Target. The Initiator can send up to 'N(retry,nack)' consecutive NACKs where 2 <= 'N(retry,nack)' <= 5. When the limit is exceeded, a PROTOCOL EXCEPTION is raised. Any other type of transmission error is to be ignored and the Initiator should continue waiting for a new frame. This is described in section 14.12.5.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement any of this so add it. This support diverges from the spec in two significant ways: a) NACKs will be sent for ANY error reported by the driver except a timeout. This is done because there is currently no way for the digital layer to distinguish a CRC or parity error from any other type of error reported by the driver. b) All other errors will cause a PROTOCOL EXCEPTION even frames with CRC errors that are less than 4 bytes. The value chosen for 'N(retry,nack)' is 2. Targets do not send NACK PDUs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:11 +00:00
ddev->nack_count = 0;
NFC: digital: Add NFC-DEP Send Chaining Support When the NFC-DEP code is given a packet to send that is larger than the peer's maximum payload, its supposed to set the 'MI' bit in the 'I' PDU's Protocol Frame Byte (PFB). Setting this bit indicates that NFC-DEP chaining is to occur. When NFC-DEP chaining is progress, sender 'I' PDUs are acknowledged with 'ACK' PDUs until the last 'I' PDU in the chain (which has the 'MI' bit cleared) is responded to with a normal 'I' PDU. This can occur while in Initiator mode or in Target mode. Sender NFC-DEP chaining is currently not implemented in the digital layer so add that support. Unfortunately, since sending a frame may require writing the CRC to the end of the data, the relevant data part of the original skb must be copied for each intermediate frame. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:09 +00:00
chaining_skb = ddev->chaining_skb;
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
NFC: digital: Add NFC-DEP Send Chaining Support When the NFC-DEP code is given a packet to send that is larger than the peer's maximum payload, its supposed to set the 'MI' bit in the 'I' PDU's Protocol Frame Byte (PFB). Setting this bit indicates that NFC-DEP chaining is to occur. When NFC-DEP chaining is progress, sender 'I' PDUs are acknowledged with 'ACK' PDUs until the last 'I' PDU in the chain (which has the 'MI' bit cleared) is responded to with a normal 'I' PDU. This can occur while in Initiator mode or in Target mode. Sender NFC-DEP chaining is currently not implemented in the digital layer so add that support. Unfortunately, since sending a frame may require writing the CRC to the end of the data, the relevant data part of the original skb must be copied for each intermediate frame. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:09 +00:00
tmp_skb = digital_send_dep_data_prep(ddev, skb, dep_req, data_exch);
if (IS_ERR(tmp_skb))
return PTR_ERR(tmp_skb);
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
NFC: digital: Add NFC-DEP Send Chaining Support When the NFC-DEP code is given a packet to send that is larger than the peer's maximum payload, its supposed to set the 'MI' bit in the 'I' PDU's Protocol Frame Byte (PFB). Setting this bit indicates that NFC-DEP chaining is to occur. When NFC-DEP chaining is progress, sender 'I' PDUs are acknowledged with 'ACK' PDUs until the last 'I' PDU in the chain (which has the 'MI' bit cleared) is responded to with a normal 'I' PDU. This can occur while in Initiator mode or in Target mode. Sender NFC-DEP chaining is currently not implemented in the digital layer so add that support. Unfortunately, since sending a frame may require writing the CRC to the end of the data, the relevant data part of the original skb must be copied for each intermediate frame. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:09 +00:00
digital_skb_push_dep_sod(ddev, tmp_skb);
ddev->skb_add_crc(tmp_skb);
NFC: digital: Fix handling of saved PDU sk_buff pointers This patch fixes the way an I-PDU is saved in case it needs to be sent again. It is now copied using pskb_copy() and not simply referenced using skb_get() since it could be modified by the driver. digital_in_send_saved_skb() and digital_tg_send_saved_skb() still get a reference on the saved skb which is re-sent but release it if the send operation fails. That way the caller doesn't have to take care about skb ref in case of error. RTOX supervisor PDU must not be saved as this can override a previously saved I-PDU that should be re-sent later on. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:39 +00:00
ddev->saved_skb = pskb_copy(tmp_skb, GFP_KERNEL);
NFC: digital: Add NFC-DEP Initiator-side ATN Support When an NFC-DEP Initiator times out when waiting for a DEP_RES from the Target, its supposed to send an ATN to the Target. The Target should respond to the ATN with a similar ATN PDU and the Initiator can then resend the last non-ATN PDU that it sent. No more than 'N(retry,atn)' are to be send where 2 <= 'N(retry,atn)' <= 5. If the Initiator had just sent a NACK PDU when the timeout occurred, it is to continue sending NACKs until 'N(retry,nack)' NACKs have been send. This is described in section 14.12.5.6 of the NFC-DEP Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. The value chosen for 'N(retry,atn)' is 2. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:13 +00:00
NFC: digital: Add support for NFC DEP Response Waiting Time When sending an ATR_REQ, the initiator must wait for the ATR_RES at least 'RWT(nfcdep,activation) + dRWT(nfcdep)' and no more than 'RWT(nfcdep,activation) + dRWT(nfcdep) + dT(nfcdep,initiator)'. This gives a timeout value between 1237 ms and 1337 ms. This patch defines DIGITAL_ATR_RES_RWT to 1337 used for the timeout value of ATR_REQ command. For other DEP PDUs, the initiator must wait between 'RWT + dRWT(nfcdep)' and 'RWT + dRWT(nfcdep) + dT(nfcdep,initiator)' where RWT is given by the following formula: '(256 * 16 / f(c)) * 2^wt' where wt is the value of the TO field in the ATR_RES response and is in the range between 0 and 14. This patch declares a mapping table for wt values and gives RWT max values between 100 ms and 5049 ms. This patch also defines DIGITAL_ATR_RES_TO_WT, the maximum wt value in target mode, to 8. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:45 +00:00
rc = digital_in_send_cmd(ddev, tmp_skb, ddev->dep_rwt,
digital_in_recv_dep_res, data_exch);
NFC: digital: Add NFC-DEP Send Chaining Support When the NFC-DEP code is given a packet to send that is larger than the peer's maximum payload, its supposed to set the 'MI' bit in the 'I' PDU's Protocol Frame Byte (PFB). Setting this bit indicates that NFC-DEP chaining is to occur. When NFC-DEP chaining is progress, sender 'I' PDUs are acknowledged with 'ACK' PDUs until the last 'I' PDU in the chain (which has the 'MI' bit cleared) is responded to with a normal 'I' PDU. This can occur while in Initiator mode or in Target mode. Sender NFC-DEP chaining is currently not implemented in the digital layer so add that support. Unfortunately, since sending a frame may require writing the CRC to the end of the data, the relevant data part of the original skb must be copied for each intermediate frame. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:09 +00:00
if (rc) {
if (tmp_skb != skb)
kfree_skb(tmp_skb);
kfree_skb(chaining_skb);
ddev->chaining_skb = NULL;
NFC: digital: Add NFC-DEP Initiator-side ATN Support When an NFC-DEP Initiator times out when waiting for a DEP_RES from the Target, its supposed to send an ATN to the Target. The Target should respond to the ATN with a similar ATN PDU and the Initiator can then resend the last non-ATN PDU that it sent. No more than 'N(retry,atn)' are to be send where 2 <= 'N(retry,atn)' <= 5. If the Initiator had just sent a NACK PDU when the timeout occurred, it is to continue sending NACKs until 'N(retry,nack)' NACKs have been send. This is described in section 14.12.5.6 of the NFC-DEP Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. The value chosen for 'N(retry,atn)' is 2. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:13 +00:00
kfree_skb(ddev->saved_skb);
ddev->saved_skb = NULL;
NFC: digital: Add NFC-DEP Send Chaining Support When the NFC-DEP code is given a packet to send that is larger than the peer's maximum payload, its supposed to set the 'MI' bit in the 'I' PDU's Protocol Frame Byte (PFB). Setting this bit indicates that NFC-DEP chaining is to occur. When NFC-DEP chaining is progress, sender 'I' PDUs are acknowledged with 'ACK' PDUs until the last 'I' PDU in the chain (which has the 'MI' bit cleared) is responded to with a normal 'I' PDU. This can occur while in Initiator mode or in Target mode. Sender NFC-DEP chaining is currently not implemented in the digital layer so add that support. Unfortunately, since sending a frame may require writing the CRC to the end of the data, the relevant data part of the original skb must be copied for each intermediate frame. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:09 +00:00
}
return rc;
NFC Digital: Add initiator NFC-DEP support This adds support for NFC-DEP protocol in initiator mode for NFC-A and NFC-F technologies. When a target is detected, the process flow is as follow: For NFC-A technology: 1 - The digital stack receives a SEL_RES as the reply of the SEL_REQ command. 2 - If b7 of SEL_RES is set, the peer device is configure for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise, it's a tag and the NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing a randomly generated NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For NFC-F technology: 1 - The digital stack receives a SENSF_RES as the reply of the SENSF_REQ command. 2 - If B1 and B2 of NFCID2 are 0x01 and 0xFE respectively, the peer device is configured for NFC-DEP protocol. NFC core is notified through nfc_targets_found(). Execution continues at step 4. 3 - Otherwise it's a type 3 tag. NFC core is notified. Detection ends. 4 - The digital stacks sends an ATR_REQ command containing the NFC-F NFCID2 as NFCID3 and the general bytes obtained from the LLCP layer of NFC core. For both technologies: 5 - The digital stacks receives the ATR_RES response containing the NFCID3 and the general bytes of the peer device. 6 - The digital stack notifies NFC core that the DEP link is up through nfc_dep_link_up(). 7 - The NFC core performs data exchange through tm_transceive(). 8 - The digital stack sends a DEP_REQ command containing an I PDU with the data from NFC core. 9 - The digital stack receives a DEP_RES command 10 - If the DEP_RES response contains a supervisor PDU with timeout extension request (RTOX) the digital stack sends a DEP_REQ command containing a supervisor PDU acknowledging the RTOX request. The execution continues at step 9. 11 - If the DEP_RES response contains an I PDU, the response data is passed back to NFC core through the response callback. The execution continues at step 8. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:29 +00:00
}
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
NFC: digital: Set rf tech and crc functions when receiving a PSL_REQ This patch sets the correct rf tech value and crc functions in target mode when receiving a PSL_REQ, as done when receiving an ATR_REQ. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-06 22:34:48 +00:00
static void digital_tg_set_rf_tech(struct nfc_digital_dev *ddev, u8 rf_tech)
{
ddev->curr_rf_tech = rf_tech;
ddev->skb_add_crc = digital_skb_add_crc_none;
ddev->skb_check_crc = digital_skb_check_crc_none;
if (DIGITAL_DRV_CAPS_TG_CRC(ddev))
return;
switch (ddev->curr_rf_tech) {
case NFC_DIGITAL_RF_TECH_106A:
ddev->skb_add_crc = digital_skb_add_crc_a;
ddev->skb_check_crc = digital_skb_check_crc_a;
break;
case NFC_DIGITAL_RF_TECH_212F:
case NFC_DIGITAL_RF_TECH_424F:
ddev->skb_add_crc = digital_skb_add_crc_f;
ddev->skb_check_crc = digital_skb_check_crc_f;
break;
default:
break;
}
}
NFC: digital: Add NFC-DEP Receive Chaining Support When the peer in an NFC-DEP exchange has a packet to send that is larger than the local maximum payload, it sets the 'MI' bit in the 'I' PDU. This indicates that NFC-DEP chaining is to occur. When such a PDU is received, the local side responds with an 'ACK' PDU and this continues until the peer sends an 'I' PDU with the 'MI' bit cleared. This indicates that the chaining sequence is complete and the entire packet has been transferred. Receiving chained PDUs is currently not supported by the digital layer so add that support. When a chaining sequence is initiated by the peer, the digital layer will allocate an skb large enough to hold 8 maximum sized frame payloads. The maximum payload can range from 64 to 254 bytes so 8 * 254 = 2032 seems like a reasonable compromise between potentially wasting memory and constantly reallocating new, larger skbs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:10 +00:00
static int digital_tg_send_ack(struct nfc_digital_dev *ddev,
struct digital_data_exch *data_exch)
{
struct digital_dep_req_res *dep_res;
struct sk_buff *skb;
int rc;
skb = digital_skb_alloc(ddev, 1);
if (!skb)
return -ENOMEM;
skb_push(skb, sizeof(struct digital_dep_req_res));
dep_res = (struct digital_dep_req_res *)skb->data;
dep_res->dir = DIGITAL_NFC_DEP_FRAME_DIR_IN;
dep_res->cmd = DIGITAL_CMD_DEP_RES;
dep_res->pfb = DIGITAL_NFC_DEP_PFB_ACK_NACK_PDU |
ddev->curr_nfc_dep_pni;
if (ddev->did) {
dep_res->pfb |= DIGITAL_NFC_DEP_PFB_DID_BIT;
networking: introduce and use skb_put_data() A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 12:29:20 +00:00
skb_put_data(skb, &ddev->did, sizeof(ddev->did));
NFC: digital: Add NFC-DEP Receive Chaining Support When the peer in an NFC-DEP exchange has a packet to send that is larger than the local maximum payload, it sets the 'MI' bit in the 'I' PDU. This indicates that NFC-DEP chaining is to occur. When such a PDU is received, the local side responds with an 'ACK' PDU and this continues until the peer sends an 'I' PDU with the 'MI' bit cleared. This indicates that the chaining sequence is complete and the entire packet has been transferred. Receiving chained PDUs is currently not supported by the digital layer so add that support. When a chaining sequence is initiated by the peer, the digital layer will allocate an skb large enough to hold 8 maximum sized frame payloads. The maximum payload can range from 64 to 254 bytes so 8 * 254 = 2032 seems like a reasonable compromise between potentially wasting memory and constantly reallocating new, larger skbs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:10 +00:00
}
ddev->curr_nfc_dep_pni =
DIGITAL_NFC_DEP_PFB_PNI(ddev->curr_nfc_dep_pni + 1);
digital_skb_push_dep_sod(ddev, skb);
ddev->skb_add_crc(skb);
NFC: digital: Fix handling of saved PDU sk_buff pointers This patch fixes the way an I-PDU is saved in case it needs to be sent again. It is now copied using pskb_copy() and not simply referenced using skb_get() since it could be modified by the driver. digital_in_send_saved_skb() and digital_tg_send_saved_skb() still get a reference on the saved skb which is re-sent but release it if the send operation fails. That way the caller doesn't have to take care about skb ref in case of error. RTOX supervisor PDU must not be saved as this can override a previously saved I-PDU that should be re-sent later on. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:39 +00:00
ddev->saved_skb = pskb_copy(skb, GFP_KERNEL);
NFC: digital: Add NFC-DEP Target-side NACK Support When an NFC-DEP Target receives a NACK PDU with a PNI equal to 1 less than the current PNI, it is supposed to re-send the last PDU. This is implied in section 14.12.5.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement Target-side NACK handing so add it. The last PDU that was sent is saved in the 'nfc_digital_dev' structure's 'saved_skb' member. The skb will have an additional reference taken to ensure that the skb isn't freed when the driver performs a kfree_skb() on the skb. The length of the skb/PDU is also saved so the length can be restored when re-sending the PDU in the skb (the driver will perform an skb_pull() so an skb_push() needs to be done to restore the skb's data pointer/length). Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:12 +00:00
NFC: digital: Add NFC-DEP Receive Chaining Support When the peer in an NFC-DEP exchange has a packet to send that is larger than the local maximum payload, it sets the 'MI' bit in the 'I' PDU. This indicates that NFC-DEP chaining is to occur. When such a PDU is received, the local side responds with an 'ACK' PDU and this continues until the peer sends an 'I' PDU with the 'MI' bit cleared. This indicates that the chaining sequence is complete and the entire packet has been transferred. Receiving chained PDUs is currently not supported by the digital layer so add that support. When a chaining sequence is initiated by the peer, the digital layer will allocate an skb large enough to hold 8 maximum sized frame payloads. The maximum payload can range from 64 to 254 bytes so 8 * 254 = 2032 seems like a reasonable compromise between potentially wasting memory and constantly reallocating new, larger skbs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:10 +00:00
rc = digital_tg_send_cmd(ddev, skb, 1500, digital_tg_recv_dep_req,
data_exch);
NFC: digital: Add NFC-DEP Target-side NACK Support When an NFC-DEP Target receives a NACK PDU with a PNI equal to 1 less than the current PNI, it is supposed to re-send the last PDU. This is implied in section 14.12.5.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement Target-side NACK handing so add it. The last PDU that was sent is saved in the 'nfc_digital_dev' structure's 'saved_skb' member. The skb will have an additional reference taken to ensure that the skb isn't freed when the driver performs a kfree_skb() on the skb. The length of the skb/PDU is also saved so the length can be restored when re-sending the PDU in the skb (the driver will perform an skb_pull() so an skb_push() needs to be done to restore the skb's data pointer/length). Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:12 +00:00
if (rc) {
NFC: digital: Add NFC-DEP Receive Chaining Support When the peer in an NFC-DEP exchange has a packet to send that is larger than the local maximum payload, it sets the 'MI' bit in the 'I' PDU. This indicates that NFC-DEP chaining is to occur. When such a PDU is received, the local side responds with an 'ACK' PDU and this continues until the peer sends an 'I' PDU with the 'MI' bit cleared. This indicates that the chaining sequence is complete and the entire packet has been transferred. Receiving chained PDUs is currently not supported by the digital layer so add that support. When a chaining sequence is initiated by the peer, the digital layer will allocate an skb large enough to hold 8 maximum sized frame payloads. The maximum payload can range from 64 to 254 bytes so 8 * 254 = 2032 seems like a reasonable compromise between potentially wasting memory and constantly reallocating new, larger skbs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:10 +00:00
kfree_skb(skb);
NFC: digital: Add NFC-DEP Target-side NACK Support When an NFC-DEP Target receives a NACK PDU with a PNI equal to 1 less than the current PNI, it is supposed to re-send the last PDU. This is implied in section 14.12.5.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement Target-side NACK handing so add it. The last PDU that was sent is saved in the 'nfc_digital_dev' structure's 'saved_skb' member. The skb will have an additional reference taken to ensure that the skb isn't freed when the driver performs a kfree_skb() on the skb. The length of the skb/PDU is also saved so the length can be restored when re-sending the PDU in the skb (the driver will perform an skb_pull() so an skb_push() needs to be done to restore the skb's data pointer/length). Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:12 +00:00
kfree_skb(ddev->saved_skb);
ddev->saved_skb = NULL;
}
NFC: digital: Add NFC-DEP Receive Chaining Support When the peer in an NFC-DEP exchange has a packet to send that is larger than the local maximum payload, it sets the 'MI' bit in the 'I' PDU. This indicates that NFC-DEP chaining is to occur. When such a PDU is received, the local side responds with an 'ACK' PDU and this continues until the peer sends an 'I' PDU with the 'MI' bit cleared. This indicates that the chaining sequence is complete and the entire packet has been transferred. Receiving chained PDUs is currently not supported by the digital layer so add that support. When a chaining sequence is initiated by the peer, the digital layer will allocate an skb large enough to hold 8 maximum sized frame payloads. The maximum payload can range from 64 to 254 bytes so 8 * 254 = 2032 seems like a reasonable compromise between potentially wasting memory and constantly reallocating new, larger skbs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:10 +00:00
return rc;
}
NFC: digital: Add NFC-DEP Target-side ATN Support When an NFC-DEP target receives an ATN PDU, its supposed to respond with a similar ATN PDU. When the Target receives an I PDU with the PNI one less than the current PNI and the last PDU sent was an ATN PDU, the Target is to resend the last non-ATN PDU that it has sent. This is described in section 14.12.3.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:14 +00:00
static int digital_tg_send_atn(struct nfc_digital_dev *ddev)
{
struct digital_dep_req_res *dep_res;
struct sk_buff *skb;
int rc;
skb = digital_skb_alloc(ddev, 1);
if (!skb)
return -ENOMEM;
skb_push(skb, sizeof(struct digital_dep_req_res));
dep_res = (struct digital_dep_req_res *)skb->data;
dep_res->dir = DIGITAL_NFC_DEP_FRAME_DIR_IN;
dep_res->cmd = DIGITAL_CMD_DEP_RES;
dep_res->pfb = DIGITAL_NFC_DEP_PFB_SUPERVISOR_PDU;
if (ddev->did) {
dep_res->pfb |= DIGITAL_NFC_DEP_PFB_DID_BIT;
networking: introduce and use skb_put_data() A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 12:29:20 +00:00
skb_put_data(skb, &ddev->did, sizeof(ddev->did));
NFC: digital: Add NFC-DEP Target-side ATN Support When an NFC-DEP target receives an ATN PDU, its supposed to respond with a similar ATN PDU. When the Target receives an I PDU with the PNI one less than the current PNI and the last PDU sent was an ATN PDU, the Target is to resend the last non-ATN PDU that it has sent. This is described in section 14.12.3.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:14 +00:00
}
digital_skb_push_dep_sod(ddev, skb);
ddev->skb_add_crc(skb);
rc = digital_tg_send_cmd(ddev, skb, 1500, digital_tg_recv_dep_req,
NULL);
if (rc)
kfree_skb(skb);
return rc;
}
NFC: digital: Add NFC-DEP Target-side NACK Support When an NFC-DEP Target receives a NACK PDU with a PNI equal to 1 less than the current PNI, it is supposed to re-send the last PDU. This is implied in section 14.12.5.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement Target-side NACK handing so add it. The last PDU that was sent is saved in the 'nfc_digital_dev' structure's 'saved_skb' member. The skb will have an additional reference taken to ensure that the skb isn't freed when the driver performs a kfree_skb() on the skb. The length of the skb/PDU is also saved so the length can be restored when re-sending the PDU in the skb (the driver will perform an skb_pull() so an skb_push() needs to be done to restore the skb's data pointer/length). Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:12 +00:00
static int digital_tg_send_saved_skb(struct nfc_digital_dev *ddev)
{
NFC: digital: Fix handling of saved PDU sk_buff pointers This patch fixes the way an I-PDU is saved in case it needs to be sent again. It is now copied using pskb_copy() and not simply referenced using skb_get() since it could be modified by the driver. digital_in_send_saved_skb() and digital_tg_send_saved_skb() still get a reference on the saved skb which is re-sent but release it if the send operation fails. That way the caller doesn't have to take care about skb ref in case of error. RTOX supervisor PDU must not be saved as this can override a previously saved I-PDU that should be re-sent later on. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:39 +00:00
int rc;
if (!ddev->saved_skb)
return -EINVAL;
NFC: digital: Add NFC-DEP Target-side NACK Support When an NFC-DEP Target receives a NACK PDU with a PNI equal to 1 less than the current PNI, it is supposed to re-send the last PDU. This is implied in section 14.12.5.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement Target-side NACK handing so add it. The last PDU that was sent is saved in the 'nfc_digital_dev' structure's 'saved_skb' member. The skb will have an additional reference taken to ensure that the skb isn't freed when the driver performs a kfree_skb() on the skb. The length of the skb/PDU is also saved so the length can be restored when re-sending the PDU in the skb (the driver will perform an skb_pull() so an skb_push() needs to be done to restore the skb's data pointer/length). Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:12 +00:00
skb_get(ddev->saved_skb);
NFC: digital: Fix handling of saved PDU sk_buff pointers This patch fixes the way an I-PDU is saved in case it needs to be sent again. It is now copied using pskb_copy() and not simply referenced using skb_get() since it could be modified by the driver. digital_in_send_saved_skb() and digital_tg_send_saved_skb() still get a reference on the saved skb which is re-sent but release it if the send operation fails. That way the caller doesn't have to take care about skb ref in case of error. RTOX supervisor PDU must not be saved as this can override a previously saved I-PDU that should be re-sent later on. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:39 +00:00
rc = digital_tg_send_cmd(ddev, ddev->saved_skb, 1500,
digital_tg_recv_dep_req, NULL);
if (rc)
kfree_skb(ddev->saved_skb);
return rc;
NFC: digital: Add NFC-DEP Target-side NACK Support When an NFC-DEP Target receives a NACK PDU with a PNI equal to 1 less than the current PNI, it is supposed to re-send the last PDU. This is implied in section 14.12.5.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement Target-side NACK handing so add it. The last PDU that was sent is saved in the 'nfc_digital_dev' structure's 'saved_skb' member. The skb will have an additional reference taken to ensure that the skb isn't freed when the driver performs a kfree_skb() on the skb. The length of the skb/PDU is also saved so the length can be restored when re-sending the PDU in the skb (the driver will perform an skb_pull() so an skb_push() needs to be done to restore the skb's data pointer/length). Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:12 +00:00
}
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
static void digital_tg_recv_dep_req(struct nfc_digital_dev *ddev, void *arg,
struct sk_buff *resp)
{
int rc;
struct digital_dep_req_res *dep_req;
NFC: digital: Rearrange NFC-DEP DEP_REQ/DEP_RES Code Rearrange some of the code in digital_in_recv_dep_res() and digital_tg_recv_dep_req() so the initial code looks similar. The real reason is prepare the code for some upcoming patches that require these changes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:03 +00:00
u8 pfb;
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
size_t size;
if (IS_ERR(resp)) {
rc = PTR_ERR(resp);
resp = NULL;
goto exit;
}
rc = ddev->skb_check_crc(resp);
if (rc) {
PROTOCOL_ERR("14.4.1.6");
goto exit;
}
rc = digital_skb_pull_dep_sod(ddev, resp);
if (rc) {
PROTOCOL_ERR("14.4.1.2");
goto exit;
}
NFC: digital: Implement NFC-DEP max payload lengths The maximum payload for NFC-DEP exchanges (i.e., the number of bytes between SoD and EoD) is negotiated using the ATR_REQ, ATR_RES, and PSL_REQ commands. The valid maximum lengths are 64, 128, 192, and 254 bytes. Currently, NFC-DEP code assumes that both sides are always using 254 byte maximums and ignores attempts by the peer to change it. Instead, implement the negotiation code, enforce the local maximum when receiving data from the peer, and don't send payloads that exceed the remote's maximum. The default local maximum is 254 bytes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:08 +00:00
if (resp->len > ddev->local_payload_max) {
rc = -EMSGSIZE;
goto exit;
}
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
size = sizeof(struct digital_dep_req_res);
dep_req = (struct digital_dep_req_res *)resp->data;
if (resp->len < size || dep_req->dir != DIGITAL_NFC_DEP_FRAME_DIR_OUT ||
dep_req->cmd != DIGITAL_CMD_DEP_REQ) {
rc = -EIO;
goto exit;
}
NFC: digital: Rearrange NFC-DEP DEP_REQ/DEP_RES Code Rearrange some of the code in digital_in_recv_dep_res() and digital_tg_recv_dep_req() so the initial code looks similar. The real reason is prepare the code for some upcoming patches that require these changes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:03 +00:00
pfb = dep_req->pfb;
NFC: digital: Add Target-mode NFC-DEP DID Support When in Target mode, the Initiator specifies whether subsequent DEP_REQ and DEP_RES frames will include a DID byte by the value passed in the ATR_REQ. If the DID value in the ATR_REQ is '0' then no DID byte will be included. If the DID value is between '1' and '14' then a DID byte containing the same value must be included in subsequent DEP_REQ and DEP_RES frames. Any other DID value is invalid. This is specified in sections 14.8.1.2 and 14.8.2.2 of the NFC Digital Protocol Spec. Checking the DID value (if it should be there at all), is not currently supported by the digital layer's NFC-DEP code. Add this support by remembering the DID value in the ATR_REQ, checking the DID value of received DEP_REQ frames (if it should be there at all), and including the remembered DID value in DEP_RES frames when appropriate. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:05 +00:00
if (DIGITAL_NFC_DEP_DID_BIT_SET(pfb)) {
if (ddev->did && (ddev->did == resp->data[3])) {
size++;
} else {
rc = -EIO;
goto exit;
}
} else if (ddev->did) {
rc = -EIO;
goto exit;
}
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
NFC: digital: Ensure no NAD byte in DEP_REQ and DEP_RES frames According to chapter 14 of the NFC-DEP Digital Protocol Spec., the NAD byte should never be present in DEP_REQ or DEP_RES frames. However, this is not enforced so add that enforcement code. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:06 +00:00
if (DIGITAL_NFC_DEP_NAD_BIT_SET(pfb)) {
rc = -EIO;
goto exit;
}
NFC: digital: Rearrange NFC-DEP DEP_REQ/DEP_RES Code Rearrange some of the code in digital_in_recv_dep_res() and digital_tg_recv_dep_req() so the initial code looks similar. The real reason is prepare the code for some upcoming patches that require these changes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:03 +00:00
if (size > resp->len) {
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
rc = -EIO;
goto exit;
}
NFC: digital: Rearrange NFC-DEP DEP_REQ/DEP_RES Code Rearrange some of the code in digital_in_recv_dep_res() and digital_tg_recv_dep_req() so the initial code looks similar. The real reason is prepare the code for some upcoming patches that require these changes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:03 +00:00
skb_pull(resp, size);
switch (DIGITAL_NFC_DEP_PFB_TYPE(pfb)) {
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
case DIGITAL_NFC_DEP_PFB_I_PDU:
NFC: digital: Add newline to pr_* calls We do not add the newline to the pr_fmt macro, in order to give more flexibility to the caller and to keep the logging style consistent with the rest of the NFC and kernel code. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-20 14:56:40 +00:00
pr_debug("DIGITAL_NFC_DEP_PFB_I_PDU\n");
NFC: digital: Enforce NFC-DEP PNI sequencing NFC-DEP DEP_REQ and DEP_RES exchanges using 'I' and 'ACK/NACK' PDUs have a sequence number called the Packet Number Information (PNI). The PNI is incremented (modulo 4) after every DEP_REQ/ DEP_RES pair and should be verified by the digital layer code. That verification isn't always done, though, so add code to make sure that it is done. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:07 +00:00
NFC: digital: Add NFC-DEP Target-side ATN Support When an NFC-DEP target receives an ATN PDU, its supposed to respond with a similar ATN PDU. When the Target receives an I PDU with the PNI one less than the current PNI and the last PDU sent was an ATN PDU, the Target is to resend the last non-ATN PDU that it has sent. This is described in section 14.12.3.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:14 +00:00
if (ddev->atn_count) {
NFC: digital: Fix target DEP_REQ I-PDU handling after ATN PDU When the initiator sends a DEP_REQ I-PDU, the target device may not reply in a timely manner. In this case the initiator device must send an attention PDU (ATN) and if the recipient replies with an ATN PDU in return, then the last I-PDU must be sent again by the initiator. This patch fixes how the target handles I-PDU received after an ATN PDU has been received. There are 2 possible cases: - The target has received the initial DEP_REQ and sends back the DEP_RES but the initiator did not receive it. In this case, after the initiator has sent an ATN PDU and the target replied it (with an ATN as well), the initiator sends the saved skb of the initial DEP_REQ again and the target replies with the saved skb of the initial DEP_RES. - Or the target did not even received the initial DEP_REQ. In this case, after the ATN PDUs exchange, the initiator sends the saved skb and the target simply passes it up, just as usual. This behavior is controlled using the atn_count and the PNI field of the digital device structure. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:41 +00:00
/* The target has received (and replied to) at least one
* ATN DEP_REQ.
*/
NFC: digital: Add NFC-DEP Target-side ATN Support When an NFC-DEP target receives an ATN PDU, its supposed to respond with a similar ATN PDU. When the Target receives an I PDU with the PNI one less than the current PNI and the last PDU sent was an ATN PDU, the Target is to resend the last non-ATN PDU that it has sent. This is described in section 14.12.3.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:14 +00:00
ddev->atn_count = 0;
NFC: digital: Fix target DEP_REQ I-PDU handling after ATN PDU When the initiator sends a DEP_REQ I-PDU, the target device may not reply in a timely manner. In this case the initiator device must send an attention PDU (ATN) and if the recipient replies with an ATN PDU in return, then the last I-PDU must be sent again by the initiator. This patch fixes how the target handles I-PDU received after an ATN PDU has been received. There are 2 possible cases: - The target has received the initial DEP_REQ and sends back the DEP_RES but the initiator did not receive it. In this case, after the initiator has sent an ATN PDU and the target replied it (with an ATN as well), the initiator sends the saved skb of the initial DEP_REQ again and the target replies with the saved skb of the initial DEP_RES. - Or the target did not even received the initial DEP_REQ. In this case, after the ATN PDUs exchange, the initiator sends the saved skb and the target simply passes it up, just as usual. This behavior is controlled using the atn_count and the PNI field of the digital device structure. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:41 +00:00
/* pni of resp PDU equal to the target current pni - 1
* means resp is the previous DEP_REQ PDU received from
* the initiator so the target replies with saved_skb
* which is the previous DEP_RES saved in
* digital_tg_send_dep_res().
*/
if (DIGITAL_NFC_DEP_PFB_PNI(pfb) ==
DIGITAL_NFC_DEP_PFB_PNI(ddev->curr_nfc_dep_pni - 1)) {
rc = digital_tg_send_saved_skb(ddev);
if (rc)
goto exit;
NFC: digital: Add NFC-DEP Target-side ATN Support When an NFC-DEP target receives an ATN PDU, its supposed to respond with a similar ATN PDU. When the Target receives an I PDU with the PNI one less than the current PNI and the last PDU sent was an ATN PDU, the Target is to resend the last non-ATN PDU that it has sent. This is described in section 14.12.3.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:14 +00:00
NFC: digital: Fix target DEP_REQ I-PDU handling after ATN PDU When the initiator sends a DEP_REQ I-PDU, the target device may not reply in a timely manner. In this case the initiator device must send an attention PDU (ATN) and if the recipient replies with an ATN PDU in return, then the last I-PDU must be sent again by the initiator. This patch fixes how the target handles I-PDU received after an ATN PDU has been received. There are 2 possible cases: - The target has received the initial DEP_REQ and sends back the DEP_RES but the initiator did not receive it. In this case, after the initiator has sent an ATN PDU and the target replied it (with an ATN as well), the initiator sends the saved skb of the initial DEP_REQ again and the target replies with the saved skb of the initial DEP_RES. - Or the target did not even received the initial DEP_REQ. In this case, after the ATN PDUs exchange, the initiator sends the saved skb and the target simply passes it up, just as usual. This behavior is controlled using the atn_count and the PNI field of the digital device structure. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:41 +00:00
goto free_resp;
}
/* atn_count > 0 and PDU pni != curr_nfc_dep_pni - 1
* means the target probably did not received the last
* DEP_REQ PDU sent by the initiator. The target
* fallbacks to normal processing then.
*/
}
if (DIGITAL_NFC_DEP_PFB_PNI(pfb) != ddev->curr_nfc_dep_pni) {
PROTOCOL_ERR("14.12.3.4");
rc = -EIO;
goto exit;
NFC: digital: Add NFC-DEP Target-side ATN Support When an NFC-DEP target receives an ATN PDU, its supposed to respond with a similar ATN PDU. When the Target receives an I PDU with the PNI one less than the current PNI and the last PDU sent was an ATN PDU, the Target is to resend the last non-ATN PDU that it has sent. This is described in section 14.12.3.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:14 +00:00
}
NFC: digital: Add NFC-DEP Target-side NACK Support When an NFC-DEP Target receives a NACK PDU with a PNI equal to 1 less than the current PNI, it is supposed to re-send the last PDU. This is implied in section 14.12.5.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement Target-side NACK handing so add it. The last PDU that was sent is saved in the 'nfc_digital_dev' structure's 'saved_skb' member. The skb will have an additional reference taken to ensure that the skb isn't freed when the driver performs a kfree_skb() on the skb. The length of the skb/PDU is also saved so the length can be restored when re-sending the PDU in the skb (the driver will perform an skb_pull() so an skb_push() needs to be done to restore the skb's data pointer/length). Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:12 +00:00
kfree_skb(ddev->saved_skb);
ddev->saved_skb = NULL;
NFC: digital: Add NFC-DEP Receive Chaining Support When the peer in an NFC-DEP exchange has a packet to send that is larger than the local maximum payload, it sets the 'MI' bit in the 'I' PDU. This indicates that NFC-DEP chaining is to occur. When such a PDU is received, the local side responds with an 'ACK' PDU and this continues until the peer sends an 'I' PDU with the 'MI' bit cleared. This indicates that the chaining sequence is complete and the entire packet has been transferred. Receiving chained PDUs is currently not supported by the digital layer so add that support. When a chaining sequence is initiated by the peer, the digital layer will allocate an skb large enough to hold 8 maximum sized frame payloads. The maximum payload can range from 64 to 254 bytes so 8 * 254 = 2032 seems like a reasonable compromise between potentially wasting memory and constantly reallocating new, larger skbs. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:10 +00:00
resp = digital_recv_dep_data_gather(ddev, pfb, resp,
digital_tg_send_ack, NULL);
if (IS_ERR(resp)) {
rc = PTR_ERR(resp);
resp = NULL;
goto exit;
}
/* If resp is NULL then we're still chaining so return and
* wait for the next part of the PDU. Else, the PDU is
* complete so pass it up.
*/
if (!resp)
return;
NFC: digital: Enforce NFC-DEP PNI sequencing NFC-DEP DEP_REQ and DEP_RES exchanges using 'I' and 'ACK/NACK' PDUs have a sequence number called the Packet Number Information (PNI). The PNI is incremented (modulo 4) after every DEP_REQ/ DEP_RES pair and should be verified by the digital layer code. That verification isn't always done, though, so add code to make sure that it is done. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:07 +00:00
rc = 0;
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
break;
case DIGITAL_NFC_DEP_PFB_ACK_NACK_PDU:
NFC: digital: Fix ACK & NACK PDUs handling in target mode When the target receives a NACK PDU, it re-sends the last sent PDU. ACK PDUs are received by the target as a reply from the initiator to chained I-PDUs. There are 3 cases to handle: - If the target has previously received 1 or more ATN PDUs and the PNI in the ACK PDU is equal to the target PNI - 1, then it means that the initiator did not received the last issued PDU from the target. In this case it re-sends this PDU. - If the target has received 1 or more ATN PDUs but the ACK PNI is not the target PNI - 1, then this means that this ACK is the reply of the previous chained I-PDU sent by the target. The target did not received it on the first attempt and it is being re-sent by the initiator. The process continues as usual. - No ATN PDU received before this ACK PDU. This is the reply of a chained I-PDU. The target keeps on processing its chained I-PDU. The code has been refactored to avoid too many indentation levels. Also, ACK and NACK PDUs were not freed. This is now fixed. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:42 +00:00
if (DIGITAL_NFC_DEP_NACK_BIT_SET(pfb)) { /* NACK */
if (DIGITAL_NFC_DEP_PFB_PNI(pfb + 1) !=
ddev->curr_nfc_dep_pni) {
NFC: digital: Add NFC-DEP Target-side NACK Support When an NFC-DEP Target receives a NACK PDU with a PNI equal to 1 less than the current PNI, it is supposed to re-send the last PDU. This is implied in section 14.12.5.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement Target-side NACK handing so add it. The last PDU that was sent is saved in the 'nfc_digital_dev' structure's 'saved_skb' member. The skb will have an additional reference taken to ensure that the skb isn't freed when the driver performs a kfree_skb() on the skb. The length of the skb/PDU is also saved so the length can be restored when re-sending the PDU in the skb (the driver will perform an skb_pull() so an skb_push() needs to be done to restore the skb's data pointer/length). Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:12 +00:00
rc = -EIO;
goto exit;
}
NFC: digital: Fix ACK & NACK PDUs handling in target mode When the target receives a NACK PDU, it re-sends the last sent PDU. ACK PDUs are received by the target as a reply from the initiator to chained I-PDUs. There are 3 cases to handle: - If the target has previously received 1 or more ATN PDUs and the PNI in the ACK PDU is equal to the target PNI - 1, then it means that the initiator did not received the last issued PDU from the target. In this case it re-sends this PDU. - If the target has received 1 or more ATN PDUs but the ACK PNI is not the target PNI - 1, then this means that this ACK is the reply of the previous chained I-PDU sent by the target. The target did not received it on the first attempt and it is being re-sent by the initiator. The process continues as usual. - No ATN PDU received before this ACK PDU. This is the reply of a chained I-PDU. The target keeps on processing its chained I-PDU. The code has been refactored to avoid too many indentation levels. Also, ACK and NACK PDUs were not freed. This is now fixed. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:42 +00:00
ddev->atn_count = 0;
rc = digital_tg_send_saved_skb(ddev);
if (rc)
goto exit;
goto free_resp;
}
/* ACK */
if (ddev->atn_count) {
/* The target has previously recevied one or more ATN
* PDUs.
*/
ddev->atn_count = 0;
NFC: digital: Add NFC-DEP Target-side ATN Support When an NFC-DEP target receives an ATN PDU, its supposed to respond with a similar ATN PDU. When the Target receives an I PDU with the PNI one less than the current PNI and the last PDU sent was an ATN PDU, the Target is to resend the last non-ATN PDU that it has sent. This is described in section 14.12.3.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:14 +00:00
NFC: digital: Fix ACK & NACK PDUs handling in target mode When the target receives a NACK PDU, it re-sends the last sent PDU. ACK PDUs are received by the target as a reply from the initiator to chained I-PDUs. There are 3 cases to handle: - If the target has previously received 1 or more ATN PDUs and the PNI in the ACK PDU is equal to the target PNI - 1, then it means that the initiator did not received the last issued PDU from the target. In this case it re-sends this PDU. - If the target has received 1 or more ATN PDUs but the ACK PNI is not the target PNI - 1, then this means that this ACK is the reply of the previous chained I-PDU sent by the target. The target did not received it on the first attempt and it is being re-sent by the initiator. The process continues as usual. - No ATN PDU received before this ACK PDU. This is the reply of a chained I-PDU. The target keeps on processing its chained I-PDU. The code has been refactored to avoid too many indentation levels. Also, ACK and NACK PDUs were not freed. This is now fixed. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:42 +00:00
/* If the ACK PNI is equal to the target PNI - 1 means
* that the initiator did not receive the previous PDU
* sent by the target so re-send it.
*/
if (DIGITAL_NFC_DEP_PFB_PNI(pfb + 1) ==
ddev->curr_nfc_dep_pni) {
NFC: digital: Add NFC-DEP Target-side ATN Support When an NFC-DEP target receives an ATN PDU, its supposed to respond with a similar ATN PDU. When the Target receives an I PDU with the PNI one less than the current PNI and the last PDU sent was an ATN PDU, the Target is to resend the last non-ATN PDU that it has sent. This is described in section 14.12.3.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:14 +00:00
rc = digital_tg_send_saved_skb(ddev);
if (rc)
goto exit;
NFC: digital: Fix ACK & NACK PDUs handling in target mode When the target receives a NACK PDU, it re-sends the last sent PDU. ACK PDUs are received by the target as a reply from the initiator to chained I-PDUs. There are 3 cases to handle: - If the target has previously received 1 or more ATN PDUs and the PNI in the ACK PDU is equal to the target PNI - 1, then it means that the initiator did not received the last issued PDU from the target. In this case it re-sends this PDU. - If the target has received 1 or more ATN PDUs but the ACK PNI is not the target PNI - 1, then this means that this ACK is the reply of the previous chained I-PDU sent by the target. The target did not received it on the first attempt and it is being re-sent by the initiator. The process continues as usual. - No ATN PDU received before this ACK PDU. This is the reply of a chained I-PDU. The target keeps on processing its chained I-PDU. The code has been refactored to avoid too many indentation levels. Also, ACK and NACK PDUs were not freed. This is now fixed. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:42 +00:00
goto free_resp;
NFC: digital: Add NFC-DEP Target-side ATN Support When an NFC-DEP target receives an ATN PDU, its supposed to respond with a similar ATN PDU. When the Target receives an I PDU with the PNI one less than the current PNI and the last PDU sent was an ATN PDU, the Target is to resend the last non-ATN PDU that it has sent. This is described in section 14.12.3.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:14 +00:00
}
NFC: digital: Fix ACK & NACK PDUs handling in target mode When the target receives a NACK PDU, it re-sends the last sent PDU. ACK PDUs are received by the target as a reply from the initiator to chained I-PDUs. There are 3 cases to handle: - If the target has previously received 1 or more ATN PDUs and the PNI in the ACK PDU is equal to the target PNI - 1, then it means that the initiator did not received the last issued PDU from the target. In this case it re-sends this PDU. - If the target has received 1 or more ATN PDUs but the ACK PNI is not the target PNI - 1, then this means that this ACK is the reply of the previous chained I-PDU sent by the target. The target did not received it on the first attempt and it is being re-sent by the initiator. The process continues as usual. - No ATN PDU received before this ACK PDU. This is the reply of a chained I-PDU. The target keeps on processing its chained I-PDU. The code has been refactored to avoid too many indentation levels. Also, ACK and NACK PDUs were not freed. This is now fixed. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:42 +00:00
/* Otherwise, the target did not receive the previous
* ACK PDU from the initiator. Fallback to normal
* processing of chained PDU then.
*/
}
NFC: digital: Enforce NFC-DEP PNI sequencing NFC-DEP DEP_REQ and DEP_RES exchanges using 'I' and 'ACK/NACK' PDUs have a sequence number called the Packet Number Information (PNI). The PNI is incremented (modulo 4) after every DEP_REQ/ DEP_RES pair and should be verified by the digital layer code. That verification isn't always done, though, so add code to make sure that it is done. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:07 +00:00
NFC: digital: Fix ACK & NACK PDUs handling in target mode When the target receives a NACK PDU, it re-sends the last sent PDU. ACK PDUs are received by the target as a reply from the initiator to chained I-PDUs. There are 3 cases to handle: - If the target has previously received 1 or more ATN PDUs and the PNI in the ACK PDU is equal to the target PNI - 1, then it means that the initiator did not received the last issued PDU from the target. In this case it re-sends this PDU. - If the target has received 1 or more ATN PDUs but the ACK PNI is not the target PNI - 1, then this means that this ACK is the reply of the previous chained I-PDU sent by the target. The target did not received it on the first attempt and it is being re-sent by the initiator. The process continues as usual. - No ATN PDU received before this ACK PDU. This is the reply of a chained I-PDU. The target keeps on processing its chained I-PDU. The code has been refactored to avoid too many indentation levels. Also, ACK and NACK PDUs were not freed. This is now fixed. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:42 +00:00
/* Keep on sending chained PDU */
if (!ddev->chaining_skb ||
DIGITAL_NFC_DEP_PFB_PNI(pfb) !=
ddev->curr_nfc_dep_pni) {
rc = -EIO;
goto exit;
}
NFC: digital: Add NFC-DEP Send Chaining Support When the NFC-DEP code is given a packet to send that is larger than the peer's maximum payload, its supposed to set the 'MI' bit in the 'I' PDU's Protocol Frame Byte (PFB). Setting this bit indicates that NFC-DEP chaining is to occur. When NFC-DEP chaining is progress, sender 'I' PDUs are acknowledged with 'ACK' PDUs until the last 'I' PDU in the chain (which has the 'MI' bit cleared) is responded to with a normal 'I' PDU. This can occur while in Initiator mode or in Target mode. Sender NFC-DEP chaining is currently not implemented in the digital layer so add that support. Unfortunately, since sending a frame may require writing the CRC to the end of the data, the relevant data part of the original skb must be copied for each intermediate frame. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:09 +00:00
NFC: digital: Fix ACK & NACK PDUs handling in target mode When the target receives a NACK PDU, it re-sends the last sent PDU. ACK PDUs are received by the target as a reply from the initiator to chained I-PDUs. There are 3 cases to handle: - If the target has previously received 1 or more ATN PDUs and the PNI in the ACK PDU is equal to the target PNI - 1, then it means that the initiator did not received the last issued PDU from the target. In this case it re-sends this PDU. - If the target has received 1 or more ATN PDUs but the ACK PNI is not the target PNI - 1, then this means that this ACK is the reply of the previous chained I-PDU sent by the target. The target did not received it on the first attempt and it is being re-sent by the initiator. The process continues as usual. - No ATN PDU received before this ACK PDU. This is the reply of a chained I-PDU. The target keeps on processing its chained I-PDU. The code has been refactored to avoid too many indentation levels. Also, ACK and NACK PDUs were not freed. This is now fixed. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:42 +00:00
kfree_skb(ddev->saved_skb);
ddev->saved_skb = NULL;
NFC: digital: Add NFC-DEP Target-side ATN Support When an NFC-DEP target receives an ATN PDU, its supposed to respond with a similar ATN PDU. When the Target receives an I PDU with the PNI one less than the current PNI and the last PDU sent was an ATN PDU, the Target is to resend the last non-ATN PDU that it has sent. This is described in section 14.12.3.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:14 +00:00
NFC: digital: Fix ACK & NACK PDUs handling in target mode When the target receives a NACK PDU, it re-sends the last sent PDU. ACK PDUs are received by the target as a reply from the initiator to chained I-PDUs. There are 3 cases to handle: - If the target has previously received 1 or more ATN PDUs and the PNI in the ACK PDU is equal to the target PNI - 1, then it means that the initiator did not received the last issued PDU from the target. In this case it re-sends this PDU. - If the target has received 1 or more ATN PDUs but the ACK PNI is not the target PNI - 1, then this means that this ACK is the reply of the previous chained I-PDU sent by the target. The target did not received it on the first attempt and it is being re-sent by the initiator. The process continues as usual. - No ATN PDU received before this ACK PDU. This is the reply of a chained I-PDU. The target keeps on processing its chained I-PDU. The code has been refactored to avoid too many indentation levels. Also, ACK and NACK PDUs were not freed. This is now fixed. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:42 +00:00
rc = digital_tg_send_dep_res(ddev, ddev->chaining_skb);
if (rc)
goto exit;
NFC: digital: Add NFC-DEP Send Chaining Support When the NFC-DEP code is given a packet to send that is larger than the peer's maximum payload, its supposed to set the 'MI' bit in the 'I' PDU's Protocol Frame Byte (PFB). Setting this bit indicates that NFC-DEP chaining is to occur. When NFC-DEP chaining is progress, sender 'I' PDUs are acknowledged with 'ACK' PDUs until the last 'I' PDU in the chain (which has the 'MI' bit cleared) is responded to with a normal 'I' PDU. This can occur while in Initiator mode or in Target mode. Sender NFC-DEP chaining is currently not implemented in the digital layer so add that support. Unfortunately, since sending a frame may require writing the CRC to the end of the data, the relevant data part of the original skb must be copied for each intermediate frame. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:09 +00:00
NFC: digital: Fix ACK & NACK PDUs handling in target mode When the target receives a NACK PDU, it re-sends the last sent PDU. ACK PDUs are received by the target as a reply from the initiator to chained I-PDUs. There are 3 cases to handle: - If the target has previously received 1 or more ATN PDUs and the PNI in the ACK PDU is equal to the target PNI - 1, then it means that the initiator did not received the last issued PDU from the target. In this case it re-sends this PDU. - If the target has received 1 or more ATN PDUs but the ACK PNI is not the target PNI - 1, then this means that this ACK is the reply of the previous chained I-PDU sent by the target. The target did not received it on the first attempt and it is being re-sent by the initiator. The process continues as usual. - No ATN PDU received before this ACK PDU. This is the reply of a chained I-PDU. The target keeps on processing its chained I-PDU. The code has been refactored to avoid too many indentation levels. Also, ACK and NACK PDUs were not freed. This is now fixed. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:42 +00:00
goto free_resp;
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
case DIGITAL_NFC_DEP_PFB_SUPERVISOR_PDU:
NFC: digital: Add NFC-DEP Target-side ATN Support When an NFC-DEP target receives an ATN PDU, its supposed to respond with a similar ATN PDU. When the Target receives an I PDU with the PNI one less than the current PNI and the last PDU sent was an ATN PDU, the Target is to resend the last non-ATN PDU that it has sent. This is described in section 14.12.3.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:14 +00:00
if (DIGITAL_NFC_DEP_PFB_IS_TIMEOUT(pfb)) {
rc = -EINVAL;
goto exit;
}
rc = digital_tg_send_atn(ddev);
if (rc)
goto exit;
ddev->atn_count++;
NFC: digital: Free supervisor PDUs This patch frees the RTOX resp sk_buff in initiator mode. It also makes use of the free_resp exit point for ATN supervisor PDUs in both initiator and target mode. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:44 +00:00
goto free_resp;
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
}
rc = nfc_tm_data_received(ddev->nfc_dev, resp);
exit:
NFC: digital: Add NFC-DEP Send Chaining Support When the NFC-DEP code is given a packet to send that is larger than the peer's maximum payload, its supposed to set the 'MI' bit in the 'I' PDU's Protocol Frame Byte (PFB). Setting this bit indicates that NFC-DEP chaining is to occur. When NFC-DEP chaining is progress, sender 'I' PDUs are acknowledged with 'ACK' PDUs until the last 'I' PDU in the chain (which has the 'MI' bit cleared) is responded to with a normal 'I' PDU. This can occur while in Initiator mode or in Target mode. Sender NFC-DEP chaining is currently not implemented in the digital layer so add that support. Unfortunately, since sending a frame may require writing the CRC to the end of the data, the relevant data part of the original skb must be copied for each intermediate frame. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:09 +00:00
kfree_skb(ddev->chaining_skb);
ddev->chaining_skb = NULL;
NFC: digital: Add NFC-DEP Target-side ATN Support When an NFC-DEP target receives an ATN PDU, its supposed to respond with a similar ATN PDU. When the Target receives an I PDU with the PNI one less than the current PNI and the last PDU sent was an ATN PDU, the Target is to resend the last non-ATN PDU that it has sent. This is described in section 14.12.3.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:14 +00:00
ddev->atn_count = 0;
NFC: digital: Add NFC-DEP Target-side NACK Support When an NFC-DEP Target receives a NACK PDU with a PNI equal to 1 less than the current PNI, it is supposed to re-send the last PDU. This is implied in section 14.12.5.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement Target-side NACK handing so add it. The last PDU that was sent is saved in the 'nfc_digital_dev' structure's 'saved_skb' member. The skb will have an additional reference taken to ensure that the skb isn't freed when the driver performs a kfree_skb() on the skb. The length of the skb/PDU is also saved so the length can be restored when re-sending the PDU in the skb (the driver will perform an skb_pull() so an skb_push() needs to be done to restore the skb's data pointer/length). Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:12 +00:00
kfree_skb(ddev->saved_skb);
ddev->saved_skb = NULL;
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
if (rc)
kfree_skb(resp);
NFC: digital: Fix target DEP_REQ I-PDU handling after ATN PDU When the initiator sends a DEP_REQ I-PDU, the target device may not reply in a timely manner. In this case the initiator device must send an attention PDU (ATN) and if the recipient replies with an ATN PDU in return, then the last I-PDU must be sent again by the initiator. This patch fixes how the target handles I-PDU received after an ATN PDU has been received. There are 2 possible cases: - The target has received the initial DEP_REQ and sends back the DEP_RES but the initiator did not receive it. In this case, after the initiator has sent an ATN PDU and the target replied it (with an ATN as well), the initiator sends the saved skb of the initial DEP_REQ again and the target replies with the saved skb of the initial DEP_RES. - Or the target did not even received the initial DEP_REQ. In this case, after the ATN PDUs exchange, the initiator sends the saved skb and the target simply passes it up, just as usual. This behavior is controlled using the atn_count and the PNI field of the digital device structure. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:41 +00:00
return;
free_resp:
dev_kfree_skb(resp);
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
}
int digital_tg_send_dep_res(struct nfc_digital_dev *ddev, struct sk_buff *skb)
{
struct digital_dep_req_res *dep_res;
NFC: digital: Add NFC-DEP Send Chaining Support When the NFC-DEP code is given a packet to send that is larger than the peer's maximum payload, its supposed to set the 'MI' bit in the 'I' PDU's Protocol Frame Byte (PFB). Setting this bit indicates that NFC-DEP chaining is to occur. When NFC-DEP chaining is progress, sender 'I' PDUs are acknowledged with 'ACK' PDUs until the last 'I' PDU in the chain (which has the 'MI' bit cleared) is responded to with a normal 'I' PDU. This can occur while in Initiator mode or in Target mode. Sender NFC-DEP chaining is currently not implemented in the digital layer so add that support. Unfortunately, since sending a frame may require writing the CRC to the end of the data, the relevant data part of the original skb must be copied for each intermediate frame. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:09 +00:00
struct sk_buff *chaining_skb, *tmp_skb;
int rc;
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
skb_push(skb, sizeof(struct digital_dep_req_res));
NFC: digital: Implement NFC-DEP max payload lengths The maximum payload for NFC-DEP exchanges (i.e., the number of bytes between SoD and EoD) is negotiated using the ATR_REQ, ATR_RES, and PSL_REQ commands. The valid maximum lengths are 64, 128, 192, and 254 bytes. Currently, NFC-DEP code assumes that both sides are always using 254 byte maximums and ignores attempts by the peer to change it. Instead, implement the negotiation code, enforce the local maximum when receiving data from the peer, and don't send payloads that exceed the remote's maximum. The default local maximum is 254 bytes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:08 +00:00
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
dep_res = (struct digital_dep_req_res *)skb->data;
dep_res->dir = DIGITAL_NFC_DEP_FRAME_DIR_IN;
dep_res->cmd = DIGITAL_CMD_DEP_RES;
dep_res->pfb = ddev->curr_nfc_dep_pni;
NFC: digital: Add Target-mode NFC-DEP DID Support When in Target mode, the Initiator specifies whether subsequent DEP_REQ and DEP_RES frames will include a DID byte by the value passed in the ATR_REQ. If the DID value in the ATR_REQ is '0' then no DID byte will be included. If the DID value is between '1' and '14' then a DID byte containing the same value must be included in subsequent DEP_REQ and DEP_RES frames. Any other DID value is invalid. This is specified in sections 14.8.1.2 and 14.8.2.2 of the NFC Digital Protocol Spec. Checking the DID value (if it should be there at all), is not currently supported by the digital layer's NFC-DEP code. Add this support by remembering the DID value in the ATR_REQ, checking the DID value of received DEP_REQ frames (if it should be there at all), and including the remembered DID value in DEP_RES frames when appropriate. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:05 +00:00
if (ddev->did) {
dep_res->pfb |= DIGITAL_NFC_DEP_PFB_DID_BIT;
networking: introduce and use skb_put_data() A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 12:29:20 +00:00
skb_put_data(skb, &ddev->did, sizeof(ddev->did));
NFC: digital: Add Target-mode NFC-DEP DID Support When in Target mode, the Initiator specifies whether subsequent DEP_REQ and DEP_RES frames will include a DID byte by the value passed in the ATR_REQ. If the DID value in the ATR_REQ is '0' then no DID byte will be included. If the DID value is between '1' and '14' then a DID byte containing the same value must be included in subsequent DEP_REQ and DEP_RES frames. Any other DID value is invalid. This is specified in sections 14.8.1.2 and 14.8.2.2 of the NFC Digital Protocol Spec. Checking the DID value (if it should be there at all), is not currently supported by the digital layer's NFC-DEP code. Add this support by remembering the DID value in the ATR_REQ, checking the DID value of received DEP_REQ frames (if it should be there at all), and including the remembered DID value in DEP_RES frames when appropriate. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:05 +00:00
}
NFC: digital: Enforce NFC-DEP PNI sequencing NFC-DEP DEP_REQ and DEP_RES exchanges using 'I' and 'ACK/NACK' PDUs have a sequence number called the Packet Number Information (PNI). The PNI is incremented (modulo 4) after every DEP_REQ/ DEP_RES pair and should be verified by the digital layer code. That verification isn't always done, though, so add code to make sure that it is done. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:07 +00:00
ddev->curr_nfc_dep_pni =
DIGITAL_NFC_DEP_PFB_PNI(ddev->curr_nfc_dep_pni + 1);
NFC: digital: Add NFC-DEP Send Chaining Support When the NFC-DEP code is given a packet to send that is larger than the peer's maximum payload, its supposed to set the 'MI' bit in the 'I' PDU's Protocol Frame Byte (PFB). Setting this bit indicates that NFC-DEP chaining is to occur. When NFC-DEP chaining is progress, sender 'I' PDUs are acknowledged with 'ACK' PDUs until the last 'I' PDU in the chain (which has the 'MI' bit cleared) is responded to with a normal 'I' PDU. This can occur while in Initiator mode or in Target mode. Sender NFC-DEP chaining is currently not implemented in the digital layer so add that support. Unfortunately, since sending a frame may require writing the CRC to the end of the data, the relevant data part of the original skb must be copied for each intermediate frame. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:09 +00:00
chaining_skb = ddev->chaining_skb;
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
NFC: digital: Add NFC-DEP Send Chaining Support When the NFC-DEP code is given a packet to send that is larger than the peer's maximum payload, its supposed to set the 'MI' bit in the 'I' PDU's Protocol Frame Byte (PFB). Setting this bit indicates that NFC-DEP chaining is to occur. When NFC-DEP chaining is progress, sender 'I' PDUs are acknowledged with 'ACK' PDUs until the last 'I' PDU in the chain (which has the 'MI' bit cleared) is responded to with a normal 'I' PDU. This can occur while in Initiator mode or in Target mode. Sender NFC-DEP chaining is currently not implemented in the digital layer so add that support. Unfortunately, since sending a frame may require writing the CRC to the end of the data, the relevant data part of the original skb must be copied for each intermediate frame. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:09 +00:00
tmp_skb = digital_send_dep_data_prep(ddev, skb, dep_res, NULL);
if (IS_ERR(tmp_skb))
return PTR_ERR(tmp_skb);
digital_skb_push_dep_sod(ddev, tmp_skb);
ddev->skb_add_crc(tmp_skb);
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
NFC: digital: Fix handling of saved PDU sk_buff pointers This patch fixes the way an I-PDU is saved in case it needs to be sent again. It is now copied using pskb_copy() and not simply referenced using skb_get() since it could be modified by the driver. digital_in_send_saved_skb() and digital_tg_send_saved_skb() still get a reference on the saved skb which is re-sent but release it if the send operation fails. That way the caller doesn't have to take care about skb ref in case of error. RTOX supervisor PDU must not be saved as this can override a previously saved I-PDU that should be re-sent later on. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:39 +00:00
ddev->saved_skb = pskb_copy(tmp_skb, GFP_KERNEL);
NFC: digital: Add NFC-DEP Target-side NACK Support When an NFC-DEP Target receives a NACK PDU with a PNI equal to 1 less than the current PNI, it is supposed to re-send the last PDU. This is implied in section 14.12.5.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement Target-side NACK handing so add it. The last PDU that was sent is saved in the 'nfc_digital_dev' structure's 'saved_skb' member. The skb will have an additional reference taken to ensure that the skb isn't freed when the driver performs a kfree_skb() on the skb. The length of the skb/PDU is also saved so the length can be restored when re-sending the PDU in the skb (the driver will perform an skb_pull() so an skb_push() needs to be done to restore the skb's data pointer/length). Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:12 +00:00
NFC: digital: Add NFC-DEP Send Chaining Support When the NFC-DEP code is given a packet to send that is larger than the peer's maximum payload, its supposed to set the 'MI' bit in the 'I' PDU's Protocol Frame Byte (PFB). Setting this bit indicates that NFC-DEP chaining is to occur. When NFC-DEP chaining is progress, sender 'I' PDUs are acknowledged with 'ACK' PDUs until the last 'I' PDU in the chain (which has the 'MI' bit cleared) is responded to with a normal 'I' PDU. This can occur while in Initiator mode or in Target mode. Sender NFC-DEP chaining is currently not implemented in the digital layer so add that support. Unfortunately, since sending a frame may require writing the CRC to the end of the data, the relevant data part of the original skb must be copied for each intermediate frame. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:09 +00:00
rc = digital_tg_send_cmd(ddev, tmp_skb, 1500, digital_tg_recv_dep_req,
NULL);
if (rc) {
if (tmp_skb != skb)
kfree_skb(tmp_skb);
kfree_skb(chaining_skb);
ddev->chaining_skb = NULL;
NFC: digital: Add NFC-DEP Target-side NACK Support When an NFC-DEP Target receives a NACK PDU with a PNI equal to 1 less than the current PNI, it is supposed to re-send the last PDU. This is implied in section 14.12.5.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement Target-side NACK handing so add it. The last PDU that was sent is saved in the 'nfc_digital_dev' structure's 'saved_skb' member. The skb will have an additional reference taken to ensure that the skb isn't freed when the driver performs a kfree_skb() on the skb. The length of the skb/PDU is also saved so the length can be restored when re-sending the PDU in the skb (the driver will perform an skb_pull() so an skb_push() needs to be done to restore the skb's data pointer/length). Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:12 +00:00
kfree_skb(ddev->saved_skb);
ddev->saved_skb = NULL;
NFC: digital: Add NFC-DEP Send Chaining Support When the NFC-DEP code is given a packet to send that is larger than the peer's maximum payload, its supposed to set the 'MI' bit in the 'I' PDU's Protocol Frame Byte (PFB). Setting this bit indicates that NFC-DEP chaining is to occur. When NFC-DEP chaining is progress, sender 'I' PDUs are acknowledged with 'ACK' PDUs until the last 'I' PDU in the chain (which has the 'MI' bit cleared) is responded to with a normal 'I' PDU. This can occur while in Initiator mode or in Target mode. Sender NFC-DEP chaining is currently not implemented in the digital layer so add that support. Unfortunately, since sending a frame may require writing the CRC to the end of the data, the relevant data part of the original skb must be copied for each intermediate frame. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:09 +00:00
}
return rc;
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
}
static void digital_tg_send_psl_res_complete(struct nfc_digital_dev *ddev,
void *arg, struct sk_buff *resp)
{
NFC: digital: Fix incorrect use of ERR_PTR and PTR_ERR macros It's bad to use these macros when not dealing with error code. this patch changes calls to these macros with correct casts. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-02 10:58:13 +00:00
u8 rf_tech = (unsigned long)arg;
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
if (IS_ERR(resp))
return;
NFC: digital: Set rf tech and crc functions when receiving a PSL_REQ This patch sets the correct rf tech value and crc functions in target mode when receiving a PSL_REQ, as done when receiving an ATR_REQ. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-06 22:34:48 +00:00
digital_tg_set_rf_tech(ddev, rf_tech);
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
digital_tg_configure_hw(ddev, NFC_DIGITAL_CONFIG_RF_TECH, rf_tech);
digital_tg_listen(ddev, 1500, digital_tg_recv_dep_req, NULL);
dev_kfree_skb(resp);
}
static int digital_tg_send_psl_res(struct nfc_digital_dev *ddev, u8 did,
u8 rf_tech)
{
struct digital_psl_res *psl_res;
struct sk_buff *skb;
int rc;
skb = digital_skb_alloc(ddev, sizeof(struct digital_psl_res));
if (!skb)
return -ENOMEM;
skb_put(skb, sizeof(struct digital_psl_res));
psl_res = (struct digital_psl_res *)skb->data;
psl_res->dir = DIGITAL_NFC_DEP_FRAME_DIR_IN;
psl_res->cmd = DIGITAL_CMD_PSL_RES;
psl_res->did = did;
digital_skb_push_dep_sod(ddev, skb);
ddev->skb_add_crc(skb);
NFC: digital: Enforce NFC-DEP PNI sequencing NFC-DEP DEP_REQ and DEP_RES exchanges using 'I' and 'ACK/NACK' PDUs have a sequence number called the Packet Number Information (PNI). The PNI is incremented (modulo 4) after every DEP_REQ/ DEP_RES pair and should be verified by the digital layer code. That verification isn't always done, though, so add code to make sure that it is done. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:07 +00:00
ddev->curr_nfc_dep_pni = 0;
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
rc = digital_tg_send_cmd(ddev, skb, 0, digital_tg_send_psl_res_complete,
NFC: digital: Fix incorrect use of ERR_PTR and PTR_ERR macros It's bad to use these macros when not dealing with error code. this patch changes calls to these macros with correct casts. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-02 10:58:13 +00:00
(void *)(unsigned long)rf_tech);
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
if (rc)
kfree_skb(skb);
return rc;
}
static void digital_tg_recv_psl_req(struct nfc_digital_dev *ddev, void *arg,
struct sk_buff *resp)
{
int rc;
struct digital_psl_req *psl_req;
u8 rf_tech;
NFC: digital: Implement NFC-DEP max payload lengths The maximum payload for NFC-DEP exchanges (i.e., the number of bytes between SoD and EoD) is negotiated using the ATR_REQ, ATR_RES, and PSL_REQ commands. The valid maximum lengths are 64, 128, 192, and 254 bytes. Currently, NFC-DEP code assumes that both sides are always using 254 byte maximums and ignores attempts by the peer to change it. Instead, implement the negotiation code, enforce the local maximum when receiving data from the peer, and don't send payloads that exceed the remote's maximum. The default local maximum is 254 bytes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:08 +00:00
u8 dsi, payload_size, payload_bits;
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
if (IS_ERR(resp)) {
rc = PTR_ERR(resp);
resp = NULL;
goto exit;
}
rc = ddev->skb_check_crc(resp);
if (rc) {
PROTOCOL_ERR("14.4.1.6");
goto exit;
}
rc = digital_skb_pull_dep_sod(ddev, resp);
if (rc) {
PROTOCOL_ERR("14.4.1.2");
goto exit;
}
psl_req = (struct digital_psl_req *)resp->data;
if (resp->len != sizeof(struct digital_psl_req) ||
psl_req->dir != DIGITAL_NFC_DEP_FRAME_DIR_OUT ||
psl_req->cmd != DIGITAL_CMD_PSL_REQ) {
rc = -EIO;
goto exit;
}
dsi = (psl_req->brs >> 3) & 0x07;
switch (dsi) {
case 0:
rf_tech = NFC_DIGITAL_RF_TECH_106A;
break;
case 1:
rf_tech = NFC_DIGITAL_RF_TECH_212F;
break;
case 2:
rf_tech = NFC_DIGITAL_RF_TECH_424F;
break;
default:
treewide: Fix typos in printk Correct spelling typo in various part of kernel Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-12-08 15:22:53 +00:00
pr_err("Unsupported dsi value %d\n", dsi);
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
goto exit;
}
NFC: digital: Implement NFC-DEP max payload lengths The maximum payload for NFC-DEP exchanges (i.e., the number of bytes between SoD and EoD) is negotiated using the ATR_REQ, ATR_RES, and PSL_REQ commands. The valid maximum lengths are 64, 128, 192, and 254 bytes. Currently, NFC-DEP code assumes that both sides are always using 254 byte maximums and ignores attempts by the peer to change it. Instead, implement the negotiation code, enforce the local maximum when receiving data from the peer, and don't send payloads that exceed the remote's maximum. The default local maximum is 254 bytes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:08 +00:00
payload_bits = DIGITAL_PAYLOAD_FSL_TO_BITS(psl_req->fsl);
payload_size = digital_payload_bits_to_size(payload_bits);
if (!payload_size || (payload_size > min(ddev->local_payload_max,
ddev->remote_payload_max))) {
rc = -EINVAL;
goto exit;
}
ddev->local_payload_max = payload_size;
ddev->remote_payload_max = payload_size;
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
rc = digital_tg_send_psl_res(ddev, psl_req->did, rf_tech);
exit:
kfree_skb(resp);
}
static void digital_tg_send_atr_res_complete(struct nfc_digital_dev *ddev,
void *arg, struct sk_buff *resp)
{
int offset;
if (IS_ERR(resp)) {
digital_poll_next_tech(ddev);
return;
}
offset = 2;
if (resp->data[0] == DIGITAL_NFC_DEP_NFCA_SOD_SB)
offset++;
NFC: digital: Add NFC-DEP Target-side ATN Support When an NFC-DEP target receives an ATN PDU, its supposed to respond with a similar ATN PDU. When the Target receives an I PDU with the PNI one less than the current PNI and the last PDU sent was an ATN PDU, the Target is to resend the last non-ATN PDU that it has sent. This is described in section 14.12.3.4 of the NFC Digital Protocol Spec. The digital layer's NFC-DEP code doesn't implement this so add that support. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:14 +00:00
ddev->atn_count = 0;
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
if (resp->data[offset] == DIGITAL_CMD_PSL_REQ)
digital_tg_recv_psl_req(ddev, arg, resp);
else
digital_tg_recv_dep_req(ddev, arg, resp);
}
static int digital_tg_send_atr_res(struct nfc_digital_dev *ddev,
struct digital_atr_req *atr_req)
{
struct digital_atr_res *atr_res;
struct sk_buff *skb;
NFC: digital: Implement NFC-DEP max payload lengths The maximum payload for NFC-DEP exchanges (i.e., the number of bytes between SoD and EoD) is negotiated using the ATR_REQ, ATR_RES, and PSL_REQ commands. The valid maximum lengths are 64, 128, 192, and 254 bytes. Currently, NFC-DEP code assumes that both sides are always using 254 byte maximums and ignores attempts by the peer to change it. Instead, implement the negotiation code, enforce the local maximum when receiving data from the peer, and don't send payloads that exceed the remote's maximum. The default local maximum is 254 bytes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:08 +00:00
u8 *gb, payload_bits;
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
size_t gb_len;
int rc;
gb = nfc_get_local_general_bytes(ddev->nfc_dev, &gb_len);
if (!gb)
gb_len = 0;
skb = digital_skb_alloc(ddev, sizeof(struct digital_atr_res) + gb_len);
if (!skb)
return -ENOMEM;
skb_put(skb, sizeof(struct digital_atr_res));
atr_res = (struct digital_atr_res *)skb->data;
memset(atr_res, 0, sizeof(struct digital_atr_res));
atr_res->dir = DIGITAL_NFC_DEP_FRAME_DIR_IN;
atr_res->cmd = DIGITAL_CMD_ATR_RES;
memcpy(atr_res->nfcid3, atr_req->nfcid3, sizeof(atr_req->nfcid3));
NFC: digital: Add support for NFC DEP Response Waiting Time When sending an ATR_REQ, the initiator must wait for the ATR_RES at least 'RWT(nfcdep,activation) + dRWT(nfcdep)' and no more than 'RWT(nfcdep,activation) + dRWT(nfcdep) + dT(nfcdep,initiator)'. This gives a timeout value between 1237 ms and 1337 ms. This patch defines DIGITAL_ATR_RES_RWT to 1337 used for the timeout value of ATR_REQ command. For other DEP PDUs, the initiator must wait between 'RWT + dRWT(nfcdep)' and 'RWT + dRWT(nfcdep) + dT(nfcdep,initiator)' where RWT is given by the following formula: '(256 * 16 / f(c)) * 2^wt' where wt is the value of the TO field in the ATR_RES response and is in the range between 0 and 14. This patch declares a mapping table for wt values and gives RWT max values between 100 ms and 5049 ms. This patch also defines DIGITAL_ATR_RES_TO_WT, the maximum wt value in target mode, to 8. Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2016-07-08 13:52:45 +00:00
atr_res->to = DIGITAL_NFC_DEP_TG_MAX_WT;
NFC: digital: Implement NFC-DEP max payload lengths The maximum payload for NFC-DEP exchanges (i.e., the number of bytes between SoD and EoD) is negotiated using the ATR_REQ, ATR_RES, and PSL_REQ commands. The valid maximum lengths are 64, 128, 192, and 254 bytes. Currently, NFC-DEP code assumes that both sides are always using 254 byte maximums and ignores attempts by the peer to change it. Instead, implement the negotiation code, enforce the local maximum when receiving data from the peer, and don't send payloads that exceed the remote's maximum. The default local maximum is 254 bytes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:08 +00:00
ddev->local_payload_max = DIGITAL_PAYLOAD_SIZE_MAX;
payload_bits = digital_payload_size_to_bits(ddev->local_payload_max);
atr_res->pp = DIGITAL_PAYLOAD_BITS_TO_PP(payload_bits);
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
if (gb_len) {
skb_put(skb, gb_len);
atr_res->pp |= DIGITAL_GB_BIT;
memcpy(atr_res->gb, gb, gb_len);
}
digital_skb_push_dep_sod(ddev, skb);
ddev->skb_add_crc(skb);
NFC: digital: Enforce NFC-DEP PNI sequencing NFC-DEP DEP_REQ and DEP_RES exchanges using 'I' and 'ACK/NACK' PDUs have a sequence number called the Packet Number Information (PNI). The PNI is incremented (modulo 4) after every DEP_REQ/ DEP_RES pair and should be verified by the digital layer code. That verification isn't always done, though, so add code to make sure that it is done. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:07 +00:00
ddev->curr_nfc_dep_pni = 0;
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
rc = digital_tg_send_cmd(ddev, skb, 999,
digital_tg_send_atr_res_complete, NULL);
NFC: digital: Fix potential skb leaks in NFC-DEP code When digital_in_send_cmd() or digital_tg_send_cmd() fail, they do not free the skb that was passed to them so the routine that allocated the skb should free it. Currently, there are several routines in the NFC-DEP code that don't do this so make them. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:02 +00:00
if (rc)
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
kfree_skb(skb);
return rc;
}
void digital_tg_recv_atr_req(struct nfc_digital_dev *ddev, void *arg,
struct sk_buff *resp)
{
int rc;
struct digital_atr_req *atr_req;
size_t gb_len, min_size;
NFC: digital: Implement NFC-DEP max payload lengths The maximum payload for NFC-DEP exchanges (i.e., the number of bytes between SoD and EoD) is negotiated using the ATR_REQ, ATR_RES, and PSL_REQ commands. The valid maximum lengths are 64, 128, 192, and 254 bytes. Currently, NFC-DEP code assumes that both sides are always using 254 byte maximums and ignores attempts by the peer to change it. Instead, implement the negotiation code, enforce the local maximum when receiving data from the peer, and don't send payloads that exceed the remote's maximum. The default local maximum is 254 bytes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:08 +00:00
u8 poll_tech_count, payload_bits;
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
if (IS_ERR(resp)) {
rc = PTR_ERR(resp);
resp = NULL;
goto exit;
}
if (!resp->len) {
rc = -EIO;
goto exit;
}
if (resp->data[0] == DIGITAL_NFC_DEP_NFCA_SOD_SB) {
min_size = DIGITAL_ATR_REQ_MIN_SIZE + 2;
NFC: digital: Set rf tech and crc functions when receiving a PSL_REQ This patch sets the correct rf tech value and crc functions in target mode when receiving a PSL_REQ, as done when receiving an ATR_REQ. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-06 22:34:48 +00:00
digital_tg_set_rf_tech(ddev, NFC_DIGITAL_RF_TECH_106A);
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
} else {
min_size = DIGITAL_ATR_REQ_MIN_SIZE + 1;
NFC: digital: Set rf tech and crc functions when receiving a PSL_REQ This patch sets the correct rf tech value and crc functions in target mode when receiving a PSL_REQ, as done when receiving an ATR_REQ. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-06 22:34:48 +00:00
digital_tg_set_rf_tech(ddev, NFC_DIGITAL_RF_TECH_212F);
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
}
if (resp->len < min_size) {
rc = -EIO;
goto exit;
}
NFC: digital: Set current target active on activate_target() call The curr_protocol field of nfc_digital_dev structure used to determine if a target is currently active was set too soon, immediately when a target is found. This is not good since there is no other way than deactivate_target() to reset curr_protocol and if activate_target() is not called, the target remains active and it's not possible to put the device in poll mode anymore. With this patch curr_protocol is set when nfc core activates a target, puts a device up, or when an ATR_REQ is received in target mode. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-06 22:34:37 +00:00
ddev->curr_protocol = NFC_PROTO_NFC_DEP_MASK;
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
rc = ddev->skb_check_crc(resp);
if (rc) {
PROTOCOL_ERR("14.4.1.6");
goto exit;
}
rc = digital_skb_pull_dep_sod(ddev, resp);
if (rc) {
PROTOCOL_ERR("14.4.1.2");
goto exit;
}
atr_req = (struct digital_atr_req *)resp->data;
if (atr_req->dir != DIGITAL_NFC_DEP_FRAME_DIR_OUT ||
NFC: digital: Add Target-mode NFC-DEP DID Support When in Target mode, the Initiator specifies whether subsequent DEP_REQ and DEP_RES frames will include a DID byte by the value passed in the ATR_REQ. If the DID value in the ATR_REQ is '0' then no DID byte will be included. If the DID value is between '1' and '14' then a DID byte containing the same value must be included in subsequent DEP_REQ and DEP_RES frames. Any other DID value is invalid. This is specified in sections 14.8.1.2 and 14.8.2.2 of the NFC Digital Protocol Spec. Checking the DID value (if it should be there at all), is not currently supported by the digital layer's NFC-DEP code. Add this support by remembering the DID value in the ATR_REQ, checking the DID value of received DEP_REQ frames (if it should be there at all), and including the remembered DID value in DEP_RES frames when appropriate. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:05 +00:00
atr_req->cmd != DIGITAL_CMD_ATR_REQ ||
atr_req->did > DIGITAL_DID_MAX) {
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
rc = -EINVAL;
goto exit;
}
NFC: digital: Implement NFC-DEP max payload lengths The maximum payload for NFC-DEP exchanges (i.e., the number of bytes between SoD and EoD) is negotiated using the ATR_REQ, ATR_RES, and PSL_REQ commands. The valid maximum lengths are 64, 128, 192, and 254 bytes. Currently, NFC-DEP code assumes that both sides are always using 254 byte maximums and ignores attempts by the peer to change it. Instead, implement the negotiation code, enforce the local maximum when receiving data from the peer, and don't send payloads that exceed the remote's maximum. The default local maximum is 254 bytes. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:08 +00:00
payload_bits = DIGITAL_PAYLOAD_PP_TO_BITS(atr_req->pp);
ddev->remote_payload_max = digital_payload_bits_to_size(payload_bits);
if (!ddev->remote_payload_max) {
rc = -EINVAL;
goto exit;
}
NFC: digital: Add Target-mode NFC-DEP DID Support When in Target mode, the Initiator specifies whether subsequent DEP_REQ and DEP_RES frames will include a DID byte by the value passed in the ATR_REQ. If the DID value in the ATR_REQ is '0' then no DID byte will be included. If the DID value is between '1' and '14' then a DID byte containing the same value must be included in subsequent DEP_REQ and DEP_RES frames. Any other DID value is invalid. This is specified in sections 14.8.1.2 and 14.8.2.2 of the NFC Digital Protocol Spec. Checking the DID value (if it should be there at all), is not currently supported by the digital layer's NFC-DEP code. Add this support by remembering the DID value in the ATR_REQ, checking the DID value of received DEP_REQ frames (if it should be there at all), and including the remembered DID value in DEP_RES frames when appropriate. Reviewed-by: Thierry Escande <thierry.escande@linux.intel.com> Tested-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-23 23:38:05 +00:00
ddev->did = atr_req->did;
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
rc = digital_tg_configure_hw(ddev, NFC_DIGITAL_CONFIG_FRAMING,
NFC_DIGITAL_FRAMING_NFC_DEP_ACTIVATED);
if (rc)
goto exit;
rc = digital_tg_send_atr_res(ddev, atr_req);
if (rc)
goto exit;
gb_len = resp->len - sizeof(struct digital_atr_req);
NFC: digital: Clear poll_tech_count before activating target Currently, digital_target_found() has a race between the events started by calling nfc_targets_found() (which ultimately expect ddev->poll_tech_count to be zero) and setting ddev->poll_tech_count to zero after the call to nfc_targets_found(). When the race is "lost" (i.e., ddev->poll_tech_count is found to not be zero by the events started by nfc_targets_found()), an error message is printed and the target is not found. A similar race exists when digital_tg_recv_atr_req() calls nfc_tm_activated(). Fix this by first saving the current value of ddev->poll_tech_count and then clearing it before calling nfc_targets_found()/nfc_tm_activated(). Clearing ddev->poll_tech_count before calling nfc_targets_found()/nfc_tm_activated() eliminates the race. Saving the value is required so it can be restored when nfc_targets_found()/nfc_tm_activated() fails and polling needs to continue. Acked-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-07-02 16:03:49 +00:00
poll_tech_count = ddev->poll_tech_count;
ddev->poll_tech_count = 0;
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
rc = nfc_tm_activated(ddev->nfc_dev, NFC_PROTO_NFC_DEP_MASK,
NFC_COMM_PASSIVE, atr_req->gb, gb_len);
NFC: digital: Clear poll_tech_count before activating target Currently, digital_target_found() has a race between the events started by calling nfc_targets_found() (which ultimately expect ddev->poll_tech_count to be zero) and setting ddev->poll_tech_count to zero after the call to nfc_targets_found(). When the race is "lost" (i.e., ddev->poll_tech_count is found to not be zero by the events started by nfc_targets_found()), an error message is printed and the target is not found. A similar race exists when digital_tg_recv_atr_req() calls nfc_tm_activated(). Fix this by first saving the current value of ddev->poll_tech_count and then clearing it before calling nfc_targets_found()/nfc_tm_activated(). Clearing ddev->poll_tech_count before calling nfc_targets_found()/nfc_tm_activated() eliminates the race. Saving the value is required so it can be restored when nfc_targets_found()/nfc_tm_activated() fails and polling needs to continue. Acked-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-07-02 16:03:49 +00:00
if (rc) {
ddev->poll_tech_count = poll_tech_count;
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
goto exit;
NFC: digital: Clear poll_tech_count before activating target Currently, digital_target_found() has a race between the events started by calling nfc_targets_found() (which ultimately expect ddev->poll_tech_count to be zero) and setting ddev->poll_tech_count to zero after the call to nfc_targets_found(). When the race is "lost" (i.e., ddev->poll_tech_count is found to not be zero by the events started by nfc_targets_found()), an error message is printed and the target is not found. A similar race exists when digital_tg_recv_atr_req() calls nfc_tm_activated(). Fix this by first saving the current value of ddev->poll_tech_count and then clearing it before calling nfc_targets_found()/nfc_tm_activated(). Clearing ddev->poll_tech_count before calling nfc_targets_found()/nfc_tm_activated() eliminates the race. Saving the value is required so it can be restored when nfc_targets_found()/nfc_tm_activated() fails and polling needs to continue. Acked-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-07-02 16:03:49 +00:00
}
NFC Digital: Add target NFC-DEP support This adds support for NFC-DEP target mode for NFC-A and NFC-F technologies. If the driver provides it, the stack uses an automatic mode for technology detection and automatic anti-collision. Otherwise the stack tries to use non-automatic synchronization and listens for SENS_REQ and SENSF_REQ commands. The detection, activation, and data exchange procedures work exactly the same way as in initiator mode, as described in the previous commits, except that the digital stack waits for commands and sends responses back to the peer device. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-09-19 15:55:30 +00:00
rc = 0;
exit:
if (rc)
digital_poll_next_tech(ddev);
dev_kfree_skb(resp);
}
Reference in New Issue Copy Permalink