linux/fs/xfs/xfs_mount.c

1448 lines
39 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2000-2005 Silicon Graphics, Inc.
* All Rights Reserved.
*/
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_shared.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_bit.h"
#include "xfs_sb.h"
#include "xfs_mount.h"
#include "xfs_inode.h"
#include "xfs_dir2.h"
#include "xfs_ialloc.h"
#include "xfs_alloc.h"
#include "xfs_rtalloc.h"
#include "xfs_bmap.h"
#include "xfs_trans.h"
#include "xfs_trans_priv.h"
#include "xfs_log.h"
xfs: log shutdown triggers should only shut down the log We've got a mess on our hands. 1. xfs_trans_commit() cannot cancel transactions because the mount is shut down - that causes dirty, aborted, unlogged log items to sit unpinned in memory and potentially get written to disk before the log is shut down. Hence xfs_trans_commit() can only abort transactions when xlog_is_shutdown() is true. 2. xfs_force_shutdown() is used in places to cause the current modification to be aborted via xfs_trans_commit() because it may be impractical or impossible to cancel the transaction directly, and hence xfs_trans_commit() must cancel transactions when xfs_is_shutdown() is true in this situation. But we can't do that because of #1. 3. Log IO errors cause log shutdowns by calling xfs_force_shutdown() to shut down the mount and then the log from log IO completion. 4. xfs_force_shutdown() can result in a log force being issued, which has to wait for log IO completion before it will mark the log as shut down. If #3 races with some other shutdown trigger that runs a log force, we rely on xfs_force_shutdown() silently ignoring #3 and avoiding shutting down the log until the failed log force completes. 5. To ensure #2 always works, we have to ensure that xfs_force_shutdown() does not return until the the log is shut down. But in the case of #4, this will result in a deadlock because the log Io completion will block waiting for a log force to complete which is blocked waiting for log IO to complete.... So the very first thing we have to do here to untangle this mess is dissociate log shutdown triggers from mount shutdowns. We already have xlog_forced_shutdown, which will atomically transistion to the log a shutdown state. Due to internal asserts it cannot be called multiple times, but was done simply because the only place that could call it was xfs_do_force_shutdown() (i.e. the mount shutdown!) and that could only call it once and once only. So the first thing we do is remove the asserts. We then convert all the internal log shutdown triggers to call xlog_force_shutdown() directly instead of xfs_force_shutdown(). This allows the log shutdown triggers to shut down the log without needing to care about mount based shutdown constraints. This means we shut down the log independently of the mount and the mount may not notice this until it's next attempt to read or modify metadata. At that point (e.g. xfs_trans_commit()) it will see that the log is shutdown, error out and shutdown the mount. To ensure that all the unmount behaviours and asserts track correctly as a result of a log shutdown, propagate the shutdown up to the mount if it is not already set. This keeps the mount and log state in sync, and saves a huge amount of hassle where code fails because of a log shutdown but only checks for mount shutdowns and hence ends up doing the wrong thing. Cleaning up that mess is an exercise for another day. This enables us to address the other problems noted above in followup patches. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2022-03-30 01:22:01 +00:00
#include "xfs_log_priv.h"
#include "xfs_error.h"
#include "xfs_quota.h"
#include "xfs_fsops.h"
#include "xfs_icache.h"
#include "xfs_sysfs.h"
#include "xfs_rmap_btree.h"
#include "xfs_refcount_btree.h"
#include "xfs_reflink.h"
#include "xfs_extent_busy.h"
#include "xfs_health.h"
2019-12-11 21:19:06 +00:00
#include "xfs_trace.h"
#include "xfs_ag.h"
#include "xfs_rtbitmap.h"
#include "scrub/stats.h"
static DEFINE_MUTEX(xfs_uuid_table_mutex);
static int xfs_uuid_table_size;
static uuid_t *xfs_uuid_table;
void
xfs_uuid_table_free(void)
{
if (xfs_uuid_table_size == 0)
return;
kfree(xfs_uuid_table);
xfs_uuid_table = NULL;
xfs_uuid_table_size = 0;
}
/*
* See if the UUID is unique among mounted XFS filesystems.
* Mount fails if UUID is nil or a FS with the same UUID is already mounted.
*/
STATIC int
xfs_uuid_mount(
struct xfs_mount *mp)
{
uuid_t *uuid = &mp->m_sb.sb_uuid;
int hole, i;
/* Publish UUID in struct super_block */
super_set_uuid(mp->m_super, uuid->b, sizeof(*uuid));
if (xfs_has_nouuid(mp))
return 0;
if (uuid_is_null(uuid)) {
xfs_warn(mp, "Filesystem has null UUID - can't mount");
return -EINVAL;
}
mutex_lock(&xfs_uuid_table_mutex);
for (i = 0, hole = -1; i < xfs_uuid_table_size; i++) {
if (uuid_is_null(&xfs_uuid_table[i])) {
hole = i;
continue;
}
if (uuid_equal(uuid, &xfs_uuid_table[i]))
goto out_duplicate;
}
if (hole < 0) {
xfs_uuid_table = krealloc(xfs_uuid_table,
(xfs_uuid_table_size + 1) * sizeof(*xfs_uuid_table),
GFP_KERNEL | __GFP_NOFAIL);
hole = xfs_uuid_table_size++;
}
xfs_uuid_table[hole] = *uuid;
mutex_unlock(&xfs_uuid_table_mutex);
return 0;
out_duplicate:
mutex_unlock(&xfs_uuid_table_mutex);
xfs_warn(mp, "Filesystem has duplicate UUID %pU - can't mount", uuid);
return -EINVAL;
}
STATIC void
xfs_uuid_unmount(
struct xfs_mount *mp)
{
uuid_t *uuid = &mp->m_sb.sb_uuid;
int i;
if (xfs_has_nouuid(mp))
return;
mutex_lock(&xfs_uuid_table_mutex);
for (i = 0; i < xfs_uuid_table_size; i++) {
if (uuid_is_null(&xfs_uuid_table[i]))
continue;
if (!uuid_equal(uuid, &xfs_uuid_table[i]))
continue;
memset(&xfs_uuid_table[i], 0, sizeof(uuid_t));
break;
}
ASSERT(i < xfs_uuid_table_size);
mutex_unlock(&xfs_uuid_table_mutex);
}
/*
* Check size of device based on the (data/realtime) block count.
* Note: this check is used by the growfs code as well as mount.
*/
int
xfs_sb_validate_fsb_count(
xfs_sb_t *sbp,
uint64_t nblocks)
{
uint64_t max_bytes;
ASSERT(sbp->sb_blocklog >= BBSHIFT);
if (check_shl_overflow(nblocks, sbp->sb_blocklog, &max_bytes))
return -EFBIG;
/* Limited by ULONG_MAX of page cache index */
if (max_bytes >> PAGE_SHIFT > ULONG_MAX)
return -EFBIG;
return 0;
}
/*
* xfs_readsb
*
* Does the initial read of the superblock.
*/
int
xfs_readsb(
struct xfs_mount *mp,
int flags)
{
unsigned int sector_size;
struct xfs_buf *bp;
struct xfs_sb *sbp = &mp->m_sb;
int error;
int loud = !(flags & XFS_MFSI_QUIET);
const struct xfs_buf_ops *buf_ops;
ASSERT(mp->m_sb_bp == NULL);
ASSERT(mp->m_ddev_targp != NULL);
/*
* For the initial read, we must guess at the sector
* size based on the block device. It's enough to
* get the sb_sectsize out of the superblock and
* then reread with the proper length.
* We don't verify it yet, because it may not be complete.
*/
sector_size = xfs_getsize_buftarg(mp->m_ddev_targp);
buf_ops = NULL;
/*
* Allocate a (locked) buffer to hold the superblock. This will be kept
* around at all times to optimize access to the superblock. Therefore,
* set XBF_NO_IOACCT to make sure it doesn't hold the buftarg count
* elevated.
*/
reread:
error = xfs_buf_read_uncached(mp->m_ddev_targp, XFS_SB_DADDR,
BTOBB(sector_size), XBF_NO_IOACCT, &bp,
buf_ops);
if (error) {
if (loud)
xfs_warn(mp, "SB validate failed with error %d.", error);
/* bad CRC means corrupted metadata */
if (error == -EFSBADCRC)
error = -EFSCORRUPTED;
return error;
}
/*
* Initialize the mount structure from the superblock.
*/
xfs_sb_from_disk(sbp, bp->b_addr);
/*
* If we haven't validated the superblock, do so now before we try
* to check the sector size and reread the superblock appropriately.
*/
if (sbp->sb_magicnum != XFS_SB_MAGIC) {
if (loud)
xfs_warn(mp, "Invalid superblock magic number");
error = -EINVAL;
goto release_buf;
}
/*
* We must be able to do sector-sized and sector-aligned IO.
*/
if (sector_size > sbp->sb_sectsize) {
if (loud)
xfs_warn(mp, "device supports %u byte sectors (not %u)",
sector_size, sbp->sb_sectsize);
error = -ENOSYS;
goto release_buf;
}
if (buf_ops == NULL) {
/*
* Re-read the superblock so the buffer is correctly sized,
* and properly verified.
*/
xfs_buf_relse(bp);
sector_size = sbp->sb_sectsize;
buf_ops = loud ? &xfs_sb_buf_ops : &xfs_sb_quiet_buf_ops;
goto reread;
}
mp->m_features |= xfs_sb_version_to_features(sbp);
xfs_reinit_percpu_counters(mp);
/*
* If logged xattrs are enabled after log recovery finishes, then set
* the opstate so that log recovery will work properly.
*/
if (xfs_sb_version_haslogxattrs(&mp->m_sb))
xfs_set_using_logged_xattrs(mp);
/* no need to be quiet anymore, so reset the buf ops */
bp->b_ops = &xfs_sb_buf_ops;
mp->m_sb_bp = bp;
xfs_buf_unlock(bp);
return 0;
release_buf:
xfs_buf_relse(bp);
return error;
}
2019-12-11 21:19:06 +00:00
/*
* If the sunit/swidth change would move the precomputed root inode value, we
* must reject the ondisk change because repair will stumble over that.
* However, we allow the mount to proceed because we never rejected this
* combination before. Returns true to update the sb, false otherwise.
*/
static inline int
xfs_check_new_dalign(
struct xfs_mount *mp,
int new_dalign,
bool *update_sb)
{
struct xfs_sb *sbp = &mp->m_sb;
xfs_ino_t calc_ino;
calc_ino = xfs_ialloc_calc_rootino(mp, new_dalign);
trace_xfs_check_new_dalign(mp, new_dalign, calc_ino);
if (sbp->sb_rootino == calc_ino) {
*update_sb = true;
return 0;
}
xfs_warn(mp,
"Cannot change stripe alignment; would require moving root inode.");
/*
* XXX: Next time we add a new incompat feature, this should start
* returning -EINVAL to fail the mount. Until then, spit out a warning
* that we're ignoring the administrator's instructions.
*/
xfs_warn(mp, "Skipping superblock stripe alignment update.");
*update_sb = false;
return 0;
}
/*
* If we were provided with new sunit/swidth values as mount options, make sure
* that they pass basic alignment and superblock feature checks, and convert
* them into the same units (FSB) that everything else expects. This step
* /must/ be done before computing the inode geometry.
*/
STATIC int
xfs_validate_new_dalign(
struct xfs_mount *mp)
{
if (mp->m_dalign == 0)
return 0;
/*
* If stripe unit and stripe width are not multiples
* of the fs blocksize turn off alignment.
*/
if ((BBTOB(mp->m_dalign) & mp->m_blockmask) ||
(BBTOB(mp->m_swidth) & mp->m_blockmask)) {
xfs_warn(mp,
"alignment check failed: sunit/swidth vs. blocksize(%d)",
mp->m_sb.sb_blocksize);
return -EINVAL;
}
/*
* Convert the stripe unit and width to FSBs.
*/
mp->m_dalign = XFS_BB_TO_FSBT(mp, mp->m_dalign);
if (mp->m_dalign && (mp->m_sb.sb_agblocks % mp->m_dalign)) {
xfs_warn(mp,
"alignment check failed: sunit/swidth vs. agsize(%d)",
mp->m_sb.sb_agblocks);
return -EINVAL;
}
if (!mp->m_dalign) {
xfs_warn(mp,
"alignment check failed: sunit(%d) less than bsize(%d)",
mp->m_dalign, mp->m_sb.sb_blocksize);
return -EINVAL;
}
mp->m_swidth = XFS_BB_TO_FSBT(mp, mp->m_swidth);
if (!xfs_has_dalign(mp)) {
xfs_warn(mp,
"cannot change alignment: superblock does not support data alignment");
return -EINVAL;
}
return 0;
}
/* Update alignment values based on mount options and sb values. */
STATIC int
xfs_update_alignment(
struct xfs_mount *mp)
{
struct xfs_sb *sbp = &mp->m_sb;
if (mp->m_dalign) {
2019-12-11 21:19:06 +00:00
bool update_sb;
int error;
if (sbp->sb_unit == mp->m_dalign &&
sbp->sb_width == mp->m_swidth)
return 0;
2019-12-11 21:19:06 +00:00
error = xfs_check_new_dalign(mp, mp->m_dalign, &update_sb);
if (error || !update_sb)
return error;
sbp->sb_unit = mp->m_dalign;
sbp->sb_width = mp->m_swidth;
mp->m_update_sb = true;
} else if (!xfs_has_noalign(mp) && xfs_has_dalign(mp)) {
mp->m_dalign = sbp->sb_unit;
mp->m_swidth = sbp->sb_width;
}
return 0;
}
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 00:35:03 +00:00
/*
* precalculate the low space thresholds for dynamic speculative preallocation.
*/
void
xfs_set_low_space_thresholds(
struct xfs_mount *mp)
{
uint64_t dblocks = mp->m_sb.sb_dblocks;
uint64_t rtexts = mp->m_sb.sb_rextents;
int i;
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 00:35:03 +00:00
do_div(dblocks, 100);
do_div(rtexts, 100);
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 00:35:03 +00:00
for (i = 0; i < XFS_LOWSP_MAX; i++) {
mp->m_low_space[i] = dblocks * (i + 1);
mp->m_low_rtexts[i] = rtexts * (i + 1);
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 00:35:03 +00:00
}
}
/*
* Check that the data (and log if separate) is an ok size.
*/
STATIC int
xfs_check_sizes(
struct xfs_mount *mp)
{
struct xfs_buf *bp;
xfs_daddr_t d;
int error;
d = (xfs_daddr_t)XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks);
if (XFS_BB_TO_FSB(mp, d) != mp->m_sb.sb_dblocks) {
xfs_warn(mp, "filesystem size mismatch detected");
return -EFBIG;
}
error = xfs_buf_read_uncached(mp->m_ddev_targp,
d - XFS_FSS_TO_BB(mp, 1),
XFS_FSS_TO_BB(mp, 1), 0, &bp, NULL);
if (error) {
xfs_warn(mp, "last sector read failed");
return error;
}
xfs_buf_relse(bp);
if (mp->m_logdev_targp == mp->m_ddev_targp)
return 0;
d = (xfs_daddr_t)XFS_FSB_TO_BB(mp, mp->m_sb.sb_logblocks);
if (XFS_BB_TO_FSB(mp, d) != mp->m_sb.sb_logblocks) {
xfs_warn(mp, "log size mismatch detected");
return -EFBIG;
}
error = xfs_buf_read_uncached(mp->m_logdev_targp,
d - XFS_FSB_TO_BB(mp, 1),
XFS_FSB_TO_BB(mp, 1), 0, &bp, NULL);
if (error) {
xfs_warn(mp, "log device read failed");
return error;
}
xfs_buf_relse(bp);
return 0;
}
/*
* Clear the quotaflags in memory and in the superblock.
*/
int
xfs_mount_reset_sbqflags(
struct xfs_mount *mp)
{
mp->m_qflags = 0;
/* It is OK to look at sb_qflags in the mount path without m_sb_lock. */
if (mp->m_sb.sb_qflags == 0)
return 0;
spin_lock(&mp->m_sb_lock);
mp->m_sb.sb_qflags = 0;
spin_unlock(&mp->m_sb_lock);
if (!xfs_fs_writable(mp, SB_FREEZE_WRITE))
return 0;
return xfs_sync_sb(mp, false);
}
uint64_t
xfs_default_resblks(xfs_mount_t *mp)
{
uint64_t resblks;
/*
* We default to 5% or 8192 fsbs of space reserved, whichever is
* smaller. This is intended to cover concurrent allocation
* transactions when we initially hit enospc. These each require a 4
* block reservation. Hence by default we cover roughly 2000 concurrent
* allocation reservations.
*/
resblks = mp->m_sb.sb_dblocks;
do_div(resblks, 20);
resblks = min_t(uint64_t, resblks, 8192);
return resblks;
}
/* Ensure the summary counts are correct. */
STATIC int
xfs_check_summary_counts(
struct xfs_mount *mp)
{
xfs: recalculate free rt extents after log recovery I've been observing periodic corruption reports from xfs_scrub involving the free rt extent counter (frextents) while running xfs/141. That test uses an error injection knob to induce a torn write to the log, and an arbitrary number of recovery mounts, frextents will count fewer free rt extents than can be found the rtbitmap. The root cause of the problem is a combination of the misuse of sb_frextents in the incore mount to reflect both incore reservations made by running transactions as well as the actual count of free rt extents on disk. The following sequence can reproduce the undercount: Thread 1 Thread 2 xfs_trans_alloc(rtextents=3) xfs_mod_frextents(-3) <blocks> xfs_attr_set() xfs_bmap_attr_addfork() xfs_add_attr2() xfs_log_sb() xfs_sb_to_disk() xfs_trans_commit() <log flushed to disk> <log goes down> Note that thread 1 subtracts 3 from sb_frextents even though it never commits to using that space. Thread 2 writes the undercounted value to the ondisk superblock and logs it to the xattr transaction, which is then flushed to disk. At next mount, log recovery will find the logged superblock and write that back into the filesystem. At the end of log recovery, we reread the superblock and install the recovered undercounted frextents value into the incore superblock. From that point on, we've effectively leaked thread 1's transaction reservation. The correct fix for this is to separate the incore reservation from the ondisk usage, but that's a matter for the next patch. Because the kernel has been logging superblocks with undercounted frextents for a very long time and we don't demand that sysadmins run xfs_repair after a crash, fix the undercount by recomputing frextents after log recovery. Gating this on log recovery is a reasonable balance (I think) between correcting the problem and slowing down every mount attempt. Note that xfs_repair will fix undercounted frextents. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-04-11 20:49:42 +00:00
int error = 0;
/*
* The AG0 superblock verifier rejects in-progress filesystems,
* so we should never see the flag set this far into mounting.
*/
if (mp->m_sb.sb_inprogress) {
xfs_err(mp, "sb_inprogress set after log recovery??");
WARN_ON(1);
return -EFSCORRUPTED;
}
/*
* Now the log is mounted, we know if it was an unclean shutdown or
* not. If it was, with the first phase of recovery has completed, we
* have consistent AG blocks on disk. We have not recovered EFIs yet,
* but they are recovered transactionally in the second recovery phase
* later.
*
* If the log was clean when we mounted, we can check the summary
* counters. If any of them are obviously incorrect, we can recompute
* them from the AGF headers in the next step.
*/
if (xfs_is_clean(mp) &&
(mp->m_sb.sb_fdblocks > mp->m_sb.sb_dblocks ||
!xfs_verify_icount(mp, mp->m_sb.sb_icount) ||
mp->m_sb.sb_ifree > mp->m_sb.sb_icount))
xfs_fs_mark_sick(mp, XFS_SICK_FS_COUNTERS);
/*
* We can safely re-initialise incore superblock counters from the
* per-ag data. These may not be correct if the filesystem was not
* cleanly unmounted, so we waited for recovery to finish before doing
* this.
*
* If the filesystem was cleanly unmounted or the previous check did
* not flag anything weird, then we can trust the values in the
* superblock to be correct and we don't need to do anything here.
* Otherwise, recalculate the summary counters.
*/
xfs: recalculate free rt extents after log recovery I've been observing periodic corruption reports from xfs_scrub involving the free rt extent counter (frextents) while running xfs/141. That test uses an error injection knob to induce a torn write to the log, and an arbitrary number of recovery mounts, frextents will count fewer free rt extents than can be found the rtbitmap. The root cause of the problem is a combination of the misuse of sb_frextents in the incore mount to reflect both incore reservations made by running transactions as well as the actual count of free rt extents on disk. The following sequence can reproduce the undercount: Thread 1 Thread 2 xfs_trans_alloc(rtextents=3) xfs_mod_frextents(-3) <blocks> xfs_attr_set() xfs_bmap_attr_addfork() xfs_add_attr2() xfs_log_sb() xfs_sb_to_disk() xfs_trans_commit() <log flushed to disk> <log goes down> Note that thread 1 subtracts 3 from sb_frextents even though it never commits to using that space. Thread 2 writes the undercounted value to the ondisk superblock and logs it to the xattr transaction, which is then flushed to disk. At next mount, log recovery will find the logged superblock and write that back into the filesystem. At the end of log recovery, we reread the superblock and install the recovered undercounted frextents value into the incore superblock. From that point on, we've effectively leaked thread 1's transaction reservation. The correct fix for this is to separate the incore reservation from the ondisk usage, but that's a matter for the next patch. Because the kernel has been logging superblocks with undercounted frextents for a very long time and we don't demand that sysadmins run xfs_repair after a crash, fix the undercount by recomputing frextents after log recovery. Gating this on log recovery is a reasonable balance (I think) between correcting the problem and slowing down every mount attempt. Note that xfs_repair will fix undercounted frextents. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-04-11 20:49:42 +00:00
if ((xfs_has_lazysbcount(mp) && !xfs_is_clean(mp)) ||
xfs_fs_has_sickness(mp, XFS_SICK_FS_COUNTERS)) {
error = xfs_initialize_perag_data(mp, mp->m_sb.sb_agcount);
if (error)
return error;
}
/*
* Older kernels misused sb_frextents to reflect both incore
* reservations made by running transactions and the actual count of
* free rt extents in the ondisk metadata. Transactions committed
* during runtime can therefore contain a superblock update that
* undercounts the number of free rt extents tracked in the rt bitmap.
* A clean unmount record will have the correct frextents value since
* there can be no other transactions running at that point.
*
* If we're mounting the rt volume after recovering the log, recompute
* frextents from the rtbitmap file to fix the inconsistency.
*/
if (xfs_has_realtime(mp) && !xfs_is_clean(mp)) {
error = xfs_rtalloc_reinit_frextents(mp);
if (error)
return error;
}
xfs: recalculate free rt extents after log recovery I've been observing periodic corruption reports from xfs_scrub involving the free rt extent counter (frextents) while running xfs/141. That test uses an error injection knob to induce a torn write to the log, and an arbitrary number of recovery mounts, frextents will count fewer free rt extents than can be found the rtbitmap. The root cause of the problem is a combination of the misuse of sb_frextents in the incore mount to reflect both incore reservations made by running transactions as well as the actual count of free rt extents on disk. The following sequence can reproduce the undercount: Thread 1 Thread 2 xfs_trans_alloc(rtextents=3) xfs_mod_frextents(-3) <blocks> xfs_attr_set() xfs_bmap_attr_addfork() xfs_add_attr2() xfs_log_sb() xfs_sb_to_disk() xfs_trans_commit() <log flushed to disk> <log goes down> Note that thread 1 subtracts 3 from sb_frextents even though it never commits to using that space. Thread 2 writes the undercounted value to the ondisk superblock and logs it to the xattr transaction, which is then flushed to disk. At next mount, log recovery will find the logged superblock and write that back into the filesystem. At the end of log recovery, we reread the superblock and install the recovered undercounted frextents value into the incore superblock. From that point on, we've effectively leaked thread 1's transaction reservation. The correct fix for this is to separate the incore reservation from the ondisk usage, but that's a matter for the next patch. Because the kernel has been logging superblocks with undercounted frextents for a very long time and we don't demand that sysadmins run xfs_repair after a crash, fix the undercount by recomputing frextents after log recovery. Gating this on log recovery is a reasonable balance (I think) between correcting the problem and slowing down every mount attempt. Note that xfs_repair will fix undercounted frextents. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-04-11 20:49:42 +00:00
return 0;
}
xfs: fix sb write verify for lazysbcount When lazysbcount is enabled, fsstress and loop mount/unmount test report the following problems: XFS (loop0): SB summary counter sanity check failed XFS (loop0): Metadata corruption detected at xfs_sb_write_verify+0x13b/0x460, xfs_sb block 0x0 XFS (loop0): Unmount and run xfs_repair XFS (loop0): First 128 bytes of corrupted metadata buffer: 00000000: 58 46 53 42 00 00 10 00 00 00 00 00 00 28 00 00 XFSB.........(.. 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000020: 69 fb 7c cd 5f dc 44 af 85 74 e0 cc d4 e3 34 5a i.|._.D..t....4Z 00000030: 00 00 00 00 00 20 00 06 00 00 00 00 00 00 00 80 ..... .......... 00000040: 00 00 00 00 00 00 00 81 00 00 00 00 00 00 00 82 ................ 00000050: 00 00 00 01 00 0a 00 00 00 00 00 04 00 00 00 00 ................ 00000060: 00 00 0a 00 b4 b5 02 00 02 00 00 08 00 00 00 00 ................ 00000070: 00 00 00 00 00 00 00 00 0c 09 09 03 14 00 00 19 ................ XFS (loop0): Corruption of in-memory data (0x8) detected at _xfs_buf_ioapply +0xe1e/0x10e0 (fs/xfs/xfs_buf.c:1580). Shutting down filesystem. XFS (loop0): Please unmount the filesystem and rectify the problem(s) XFS (loop0): log mount/recovery failed: error -117 XFS (loop0): log mount failed This corruption will shutdown the file system and the file system will no longer be mountable. The following script can reproduce the problem, but it may take a long time. #!/bin/bash device=/dev/sda testdir=/mnt/test round=0 function fail() { echo "$*" exit 1 } mkdir -p $testdir while [ $round -lt 10000 ] do echo "******* round $round ********" mkfs.xfs -f $device mount $device $testdir || fail "mount failed!" fsstress -d $testdir -l 0 -n 10000 -p 4 >/dev/null & sleep 4 killall -w fsstress umount $testdir xfs_repair -e $device > /dev/null if [ $? -eq 2 ];then echo "ERR CODE 2: Dirty log exception during repair." exit 1 fi round=$(($round+1)) done With lazysbcount is enabled, There is no additional lock protection for reading m_ifree and m_icount in xfs_log_sb(), if other cpu modifies the m_ifree, this will make the m_ifree greater than m_icount. For example, consider the following sequence and ifreedelta is postive: CPU0 CPU1 xfs_log_sb xfs_trans_unreserve_and_mod_sb ---------- ------------------------------ percpu_counter_sum(&mp->m_icount) percpu_counter_add_batch(&mp->m_icount, idelta, XFS_ICOUNT_BATCH) percpu_counter_add(&mp->m_ifree, ifreedelta); percpu_counter_sum(&mp->m_ifree) After this, incorrect inode count (sb_ifree > sb_icount) will be writen to the log. In the subsequent writing of sb, incorrect inode count (sb_ifree > sb_icount) will fail to pass the boundary check in xfs_validate_sb_write() that cause the file system shutdown. When lazysbcount is enabled, we don't need to guarantee that Lazy sb counters are completely correct, but we do need to guarantee that sb_ifree <= sb_icount. On the other hand, the constraint that m_ifree <= m_icount must be satisfied any time that there /cannot/ be other threads allocating or freeing inode chunks. If the constraint is violated under these circumstances, sb_i{count,free} (the ondisk superblock inode counters) maybe incorrect and need to be marked sick at unmount, the count will be rebuilt on the next mount. Fixes: 8756a5af1819 ("libxfs: add more bounds checking to sb sanity checks") Signed-off-by: Long Li <leo.lilong@huawei.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2022-11-17 03:20:20 +00:00
static void
xfs_unmount_check(
struct xfs_mount *mp)
{
if (xfs_is_shutdown(mp))
return;
if (percpu_counter_sum(&mp->m_ifree) >
percpu_counter_sum(&mp->m_icount)) {
xfs_alert(mp, "ifree/icount mismatch at unmount");
xfs_fs_mark_sick(mp, XFS_SICK_FS_COUNTERS);
}
}
/*
* Flush and reclaim dirty inodes in preparation for unmount. Inodes and
* internal inode structures can be sitting in the CIL and AIL at this point,
* so we need to unpin them, write them back and/or reclaim them before unmount
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
* can proceed. In other words, callers are required to have inactivated all
* inodes.
*
* An inode cluster that has been freed can have its buffer still pinned in
* memory because the transaction is still sitting in a iclog. The stale inodes
* on that buffer will be pinned to the buffer until the transaction hits the
* disk and the callbacks run. Pushing the AIL will skip the stale inodes and
* may never see the pinned buffer, so nothing will push out the iclog and
* unpin the buffer.
*
* Hence we need to force the log to unpin everything first. However, log
* forces don't wait for the discards they issue to complete, so we have to
* explicitly wait for them to complete here as well.
*
* Then we can tell the world we are unmounting so that error handling knows
* that the filesystem is going away and we should error out anything that we
* have been retrying in the background. This will prevent never-ending
* retries in AIL pushing from hanging the unmount.
*
* Finally, we can push the AIL to clean all the remaining dirty objects, then
* reclaim the remaining inodes that are still in memory at this point in time.
*/
static void
xfs_unmount_flush_inodes(
struct xfs_mount *mp)
{
xfs_log_force(mp, XFS_LOG_SYNC);
xfs_extent_busy_wait_all(mp);
flush_workqueue(xfs_discard_wq);
xfs_set_unmounting(mp);
xfs_ail_push_all_sync(mp->m_ail);
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
xfs_inodegc_stop(mp);
cancel_delayed_work_sync(&mp->m_reclaim_work);
xfs_reclaim_inodes(mp);
xfs_health_unmount(mp);
}
static void
xfs_mount_setup_inode_geom(
struct xfs_mount *mp)
{
struct xfs_ino_geometry *igeo = M_IGEO(mp);
igeo->attr_fork_offset = xfs_bmap_compute_attr_offset(mp);
ASSERT(igeo->attr_fork_offset < XFS_LITINO(mp));
xfs_ialloc_setup_geometry(mp);
}
/* Compute maximum possible height for per-AG btree types for this fs. */
static inline void
xfs_agbtree_compute_maxlevels(
struct xfs_mount *mp)
{
unsigned int levels;
levels = max(mp->m_alloc_maxlevels, M_IGEO(mp)->inobt_maxlevels);
levels = max(levels, mp->m_rmap_maxlevels);
mp->m_agbtree_maxlevels = max(levels, mp->m_refc_maxlevels);
}
/*
* This function does the following on an initial mount of a file system:
* - reads the superblock from disk and init the mount struct
* - if we're a 32-bit kernel, do a size check on the superblock
* so we don't mount terabyte filesystems
* - init mount struct realtime fields
* - allocate inode hash table for fs
* - init directory manager
* - perform recovery and init the log manager
*/
int
xfs_mountfs(
struct xfs_mount *mp)
{
struct xfs_sb *sbp = &(mp->m_sb);
struct xfs_inode *rip;
struct xfs_ino_geometry *igeo = M_IGEO(mp);
uint quotamount = 0;
uint quotaflags = 0;
int error = 0;
xfs_sb_mount_common(mp, sbp);
/*
* Check for a mismatched features2 values. Older kernels read & wrote
* into the wrong sb offset for sb_features2 on some platforms due to
* xfs_sb_t not being 64bit size aligned when sb_features2 was added,
* which made older superblock reading/writing routines swap it as a
* 64-bit value.
*
* For backwards compatibility, we make both slots equal.
*
* If we detect a mismatched field, we OR the set bits into the existing
* features2 field in case it has already been modified; we don't want
* to lose any features. We then update the bad location with the ORed
* value so that older kernels will see any features2 flags. The
* superblock writeback code ensures the new sb_features2 is copied to
* sb_bad_features2 before it is logged or written to disk.
*/
if (xfs_sb_has_mismatched_features2(sbp)) {
xfs_warn(mp, "correcting sb_features alignment problem");
sbp->sb_features2 |= sbp->sb_bad_features2;
mp->m_update_sb = true;
}
/* always use v2 inodes by default now */
if (!(mp->m_sb.sb_versionnum & XFS_SB_VERSION_NLINKBIT)) {
mp->m_sb.sb_versionnum |= XFS_SB_VERSION_NLINKBIT;
mp->m_features |= XFS_FEAT_NLINK;
mp->m_update_sb = true;
}
/*
* If we were given new sunit/swidth options, do some basic validation
* checks and convert the incore dalign and swidth values to the
* same units (FSB) that everything else uses. This /must/ happen
* before computing the inode geometry.
*/
error = xfs_validate_new_dalign(mp);
if (error)
goto out;
xfs_alloc_compute_maxlevels(mp);
xfs_bmap_compute_maxlevels(mp, XFS_DATA_FORK);
xfs_bmap_compute_maxlevels(mp, XFS_ATTR_FORK);
xfs_mount_setup_inode_geom(mp);
xfs_rmapbt_compute_maxlevels(mp);
xfs_refcountbt_compute_maxlevels(mp);
xfs_agbtree_compute_maxlevels(mp);
/*
* Check if sb_agblocks is aligned at stripe boundary. If sb_agblocks
* is NOT aligned turn off m_dalign since allocator alignment is within
* an ag, therefore ag has to be aligned at stripe boundary. Note that
* we must compute the free space and rmap btree geometry before doing
* this.
*/
error = xfs_update_alignment(mp);
if (error)
goto out;
/* enable fail_at_unmount as default */
mp->m_fail_unmount = true;
super_set_sysfs_name_id(mp->m_super);
error = xfs_sysfs_init(&mp->m_kobj, &xfs_mp_ktype,
NULL, mp->m_super->s_id);
if (error)
goto out;
error = xfs_sysfs_init(&mp->m_stats.xs_kobj, &xfs_stats_ktype,
&mp->m_kobj, "stats");
if (error)
goto out_remove_sysfs;
xchk_stats_register(mp->m_scrub_stats, mp->m_debugfs);
error = xfs_error_sysfs_init(mp);
if (error)
goto out_remove_scrub_stats;
error = xfs_errortag_init(mp);
if (error)
goto out_remove_error_sysfs;
error = xfs_uuid_mount(mp);
if (error)
goto out_remove_errortag;
/*
* Update the preferred write size based on the information from the
* on-disk superblock.
*/
mp->m_allocsize_log =
max_t(uint32_t, sbp->sb_blocklog, mp->m_allocsize_log);
mp->m_allocsize_blocks = 1U << (mp->m_allocsize_log - sbp->sb_blocklog);
xfs: dynamic speculative EOF preallocation Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
2011-01-04 00:35:03 +00:00
/* set the low space thresholds for dynamic preallocation */
xfs_set_low_space_thresholds(mp);
/*
* If enabled, sparse inode chunk alignment is expected to match the
* cluster size. Full inode chunk alignment must match the chunk size,
* but that is checked on sb read verification...
*/
if (xfs_has_sparseinodes(mp) &&
mp->m_sb.sb_spino_align !=
XFS_B_TO_FSBT(mp, igeo->inode_cluster_size_raw)) {
xfs_warn(mp,
"Sparse inode block alignment (%u) must match cluster size (%llu).",
mp->m_sb.sb_spino_align,
XFS_B_TO_FSBT(mp, igeo->inode_cluster_size_raw));
error = -EINVAL;
goto out_remove_uuid;
}
/*
* Check that the data (and log if separate) is an ok size.
*/
error = xfs_check_sizes(mp);
if (error)
goto out_remove_uuid;
/*
* Initialize realtime fields in the mount structure
*/
error = xfs_rtmount_init(mp);
if (error) {
xfs_warn(mp, "RT mount failed");
goto out_remove_uuid;
}
/*
* Copies the low order bits of the timestamp and the randomly
* set "sequence" number out of a UUID.
*/
mp->m_fixedfsid[0] =
(get_unaligned_be16(&sbp->sb_uuid.b[8]) << 16) |
get_unaligned_be16(&sbp->sb_uuid.b[4]);
mp->m_fixedfsid[1] = get_unaligned_be32(&sbp->sb_uuid.b[0]);
error = xfs_da_mount(mp);
if (error) {
xfs_warn(mp, "Failed dir/attr init: %d", error);
goto out_remove_uuid;
}
/*
* Initialize the precomputed transaction reservations values.
*/
xfs_trans_init(mp);
/*
* Allocate and initialize the per-ag data.
*/
error = xfs_initialize_perag(mp, 0, sbp->sb_agcount,
mp->m_sb.sb_dblocks, &mp->m_maxagi);
xfs: Replace per-ag array with a radix tree The use of an array for the per-ag structures requires reallocation of the array when growing the filesystem. This requires locking access to the array to avoid use after free situations, and the locking is difficult to get right. To avoid needing to reallocate an array, change the per-ag structures to an allocated object per ag and index them using a tree structure. The AGs are always densely indexed (hence the use of an array), but the number supported is 2^32 and lookups tend to be random and hence indexing needs to scale. A simple choice is a radix tree - it works well with this sort of index. This change also removes another large contiguous allocation from the mount/growfs path in XFS. The growing process now needs to change to only initialise the new AGs required for the extra space, and as such only needs to exclusively lock the tree for inserts. The rest of the code only needs to lock the tree while doing lookups, and hence this will remove all the deadlocks that currently occur on the m_perag_lock as it is now an innermost lock. The lock is also changed to a spinlock from a read/write lock as the hold time is now extremely short. To complete the picture, the per-ag structures will need to be reference counted to ensure that we don't free/modify them while they are still in use. This will be done in subsequent patch. Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-11 11:47:44 +00:00
if (error) {
xfs_warn(mp, "Failed per-ag init: %d", error);
goto out_free_dir;
xfs: Replace per-ag array with a radix tree The use of an array for the per-ag structures requires reallocation of the array when growing the filesystem. This requires locking access to the array to avoid use after free situations, and the locking is difficult to get right. To avoid needing to reallocate an array, change the per-ag structures to an allocated object per ag and index them using a tree structure. The AGs are always densely indexed (hence the use of an array), but the number supported is 2^32 and lookups tend to be random and hence indexing needs to scale. A simple choice is a radix tree - it works well with this sort of index. This change also removes another large contiguous allocation from the mount/growfs path in XFS. The growing process now needs to change to only initialise the new AGs required for the extra space, and as such only needs to exclusively lock the tree for inserts. The rest of the code only needs to lock the tree while doing lookups, and hence this will remove all the deadlocks that currently occur on the m_perag_lock as it is now an innermost lock. The lock is also changed to a spinlock from a read/write lock as the hold time is now extremely short. To complete the picture, the per-ag structures will need to be reference counted to ensure that we don't free/modify them while they are still in use. This will be done in subsequent patch. Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-11 11:47:44 +00:00
}
if (XFS_IS_CORRUPT(mp, !sbp->sb_logblocks)) {
xfs_warn(mp, "no log defined");
error = -EFSCORRUPTED;
goto out_free_perag;
}
error = xfs_inodegc_register_shrinker(mp);
if (error)
goto out_fail_wait;
/*
* Log's mount-time initialization. The first part of recovery can place
* some items on the AIL, to be handled when recovery is finished or
* cancelled.
*/
error = xfs_log_mount(mp, mp->m_logdev_targp,
XFS_FSB_TO_DADDR(mp, sbp->sb_logstart),
XFS_FSB_TO_BB(mp, sbp->sb_logblocks));
if (error) {
xfs_warn(mp, "log mount failed");
goto out_inodegc_shrinker;
}
/*
* If logged xattrs are still enabled after log recovery finishes, then
* they'll be available until unmount. Otherwise, turn them off.
*/
if (xfs_sb_version_haslogxattrs(&mp->m_sb))
xfs_set_using_logged_xattrs(mp);
else
xfs_clear_using_logged_xattrs(mp);
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
/* Enable background inode inactivation workers. */
xfs_inodegc_start(mp);
xfs_blockgc_start(mp);
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
xfs: rework attr2 feature and mount options The attr2 feature is somewhat unique in that it has both a superblock feature bit to enable it and mount options to enable and disable it. Back when it was first introduced in 2005, attr2 was disabled unless either the attr2 superblock feature bit was set, or the attr2 mount option was set. If the superblock feature bit was not set but the mount option was set, then when the first attr2 format inode fork was created, it would set the superblock feature bit. This is as it should be - the superblock feature bit indicated the presence of the attr2 on disk format. The noattr2 mount option, however, did not affect the superblock feature bit. If noattr2 was specified, the on-disk superblock feature bit was ignored and the code always just created attr1 format inode forks. If neither of the attr2 or noattr2 mounts option were specified, then the behaviour was determined by the superblock feature bit. This was all pretty sane. Fast foward 3 years, and we are dealing with fallout from the botched sb_features2 addition and having to deal with feature mismatches between the sb_features2 and sb_bad_features2 fields. The attr2 feature bit was one of these flags. The reconciliation was done well after mount option parsing and, unfortunately, the feature reconciliation had a bug where it ignored the noattr2 mount option. For reasons lost to the mists of time, it was decided that resolving this issue in commit 7c12f296500e ("[XFS] Fix up noattr2 so that it will properly update the versionnum and features2 fields.") required noattr2 to clear the superblock attr2 feature bit. This greatly complicated the attr2 behaviour and broke rules about feature bits needing to be set when those specific features are present in the filesystem. By complicated, I mean that it introduced problems due to feature bit interactions with log recovery. All of the superblock feature bit checks are done prior to log recovery, but if we crash after removing a feature bit, then on the next mount we see the feature bit in the unrecovered superblock, only to have it go away after the log has been replayed. This means our mount time feature processing could be all wrong. Hence you can mount with noattr2, crash shortly afterwards, and mount again without attr2 or noattr2 and still have attr2 enabled because the second mount sees attr2 still enabled in the superblock before recovery runs and removes the feature bit. It's just a mess. Further, this is all legacy code as the v5 format requires attr2 to be enabled at all times and it cannot be disabled. i.e. the noattr2 mount option returns an error when used on v5 format filesystems. To straighten this all out, this patch reverts the attr2/noattr2 mount option behaviour back to the original behaviour. There is no reason for disabling attr2 these days, so we will only do this when the noattr2 mount option is set. This will not remove the superblock feature bit. The superblock bit will provide the default behaviour and only track whether attr2 is present on disk or not. The attr2 mount option will enable the creation of attr2 format inode forks, and if the superblock feature bit is not set it will be added when the first attr2 inode fork is created. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 01:46:25 +00:00
/*
* Now that we've recovered any pending superblock feature bit
* additions, we can finish setting up the attr2 behaviour for the
* mount. The noattr2 option overrides the superblock flag, so only
* check the superblock feature flag if the mount option is not set.
xfs: rework attr2 feature and mount options The attr2 feature is somewhat unique in that it has both a superblock feature bit to enable it and mount options to enable and disable it. Back when it was first introduced in 2005, attr2 was disabled unless either the attr2 superblock feature bit was set, or the attr2 mount option was set. If the superblock feature bit was not set but the mount option was set, then when the first attr2 format inode fork was created, it would set the superblock feature bit. This is as it should be - the superblock feature bit indicated the presence of the attr2 on disk format. The noattr2 mount option, however, did not affect the superblock feature bit. If noattr2 was specified, the on-disk superblock feature bit was ignored and the code always just created attr1 format inode forks. If neither of the attr2 or noattr2 mounts option were specified, then the behaviour was determined by the superblock feature bit. This was all pretty sane. Fast foward 3 years, and we are dealing with fallout from the botched sb_features2 addition and having to deal with feature mismatches between the sb_features2 and sb_bad_features2 fields. The attr2 feature bit was one of these flags. The reconciliation was done well after mount option parsing and, unfortunately, the feature reconciliation had a bug where it ignored the noattr2 mount option. For reasons lost to the mists of time, it was decided that resolving this issue in commit 7c12f296500e ("[XFS] Fix up noattr2 so that it will properly update the versionnum and features2 fields.") required noattr2 to clear the superblock attr2 feature bit. This greatly complicated the attr2 behaviour and broke rules about feature bits needing to be set when those specific features are present in the filesystem. By complicated, I mean that it introduced problems due to feature bit interactions with log recovery. All of the superblock feature bit checks are done prior to log recovery, but if we crash after removing a feature bit, then on the next mount we see the feature bit in the unrecovered superblock, only to have it go away after the log has been replayed. This means our mount time feature processing could be all wrong. Hence you can mount with noattr2, crash shortly afterwards, and mount again without attr2 or noattr2 and still have attr2 enabled because the second mount sees attr2 still enabled in the superblock before recovery runs and removes the feature bit. It's just a mess. Further, this is all legacy code as the v5 format requires attr2 to be enabled at all times and it cannot be disabled. i.e. the noattr2 mount option returns an error when used on v5 format filesystems. To straighten this all out, this patch reverts the attr2/noattr2 mount option behaviour back to the original behaviour. There is no reason for disabling attr2 these days, so we will only do this when the noattr2 mount option is set. This will not remove the superblock feature bit. The superblock bit will provide the default behaviour and only track whether attr2 is present on disk or not. The attr2 mount option will enable the creation of attr2 format inode forks, and if the superblock feature bit is not set it will be added when the first attr2 inode fork is created. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 01:46:25 +00:00
*/
if (xfs_has_noattr2(mp)) {
mp->m_features &= ~XFS_FEAT_ATTR2;
} else if (!xfs_has_attr2(mp) &&
(mp->m_sb.sb_features2 & XFS_SB_VERSION2_ATTR2BIT)) {
mp->m_features |= XFS_FEAT_ATTR2;
}
xfs: rework attr2 feature and mount options The attr2 feature is somewhat unique in that it has both a superblock feature bit to enable it and mount options to enable and disable it. Back when it was first introduced in 2005, attr2 was disabled unless either the attr2 superblock feature bit was set, or the attr2 mount option was set. If the superblock feature bit was not set but the mount option was set, then when the first attr2 format inode fork was created, it would set the superblock feature bit. This is as it should be - the superblock feature bit indicated the presence of the attr2 on disk format. The noattr2 mount option, however, did not affect the superblock feature bit. If noattr2 was specified, the on-disk superblock feature bit was ignored and the code always just created attr1 format inode forks. If neither of the attr2 or noattr2 mounts option were specified, then the behaviour was determined by the superblock feature bit. This was all pretty sane. Fast foward 3 years, and we are dealing with fallout from the botched sb_features2 addition and having to deal with feature mismatches between the sb_features2 and sb_bad_features2 fields. The attr2 feature bit was one of these flags. The reconciliation was done well after mount option parsing and, unfortunately, the feature reconciliation had a bug where it ignored the noattr2 mount option. For reasons lost to the mists of time, it was decided that resolving this issue in commit 7c12f296500e ("[XFS] Fix up noattr2 so that it will properly update the versionnum and features2 fields.") required noattr2 to clear the superblock attr2 feature bit. This greatly complicated the attr2 behaviour and broke rules about feature bits needing to be set when those specific features are present in the filesystem. By complicated, I mean that it introduced problems due to feature bit interactions with log recovery. All of the superblock feature bit checks are done prior to log recovery, but if we crash after removing a feature bit, then on the next mount we see the feature bit in the unrecovered superblock, only to have it go away after the log has been replayed. This means our mount time feature processing could be all wrong. Hence you can mount with noattr2, crash shortly afterwards, and mount again without attr2 or noattr2 and still have attr2 enabled because the second mount sees attr2 still enabled in the superblock before recovery runs and removes the feature bit. It's just a mess. Further, this is all legacy code as the v5 format requires attr2 to be enabled at all times and it cannot be disabled. i.e. the noattr2 mount option returns an error when used on v5 format filesystems. To straighten this all out, this patch reverts the attr2/noattr2 mount option behaviour back to the original behaviour. There is no reason for disabling attr2 these days, so we will only do this when the noattr2 mount option is set. This will not remove the superblock feature bit. The superblock bit will provide the default behaviour and only track whether attr2 is present on disk or not. The attr2 mount option will enable the creation of attr2 format inode forks, and if the superblock feature bit is not set it will be added when the first attr2 inode fork is created. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-19 01:46:25 +00:00
/*
* Get and sanity-check the root inode.
* Save the pointer to it in the mount structure.
*/
error = xfs_iget(mp, NULL, sbp->sb_rootino, XFS_IGET_UNTRUSTED,
XFS_ILOCK_EXCL, &rip);
if (error) {
xfs_warn(mp,
"Failed to read root inode 0x%llx, error %d",
sbp->sb_rootino, -error);
goto out_log_dealloc;
}
ASSERT(rip != NULL);
if (XFS_IS_CORRUPT(mp, !S_ISDIR(VFS_I(rip)->i_mode))) {
xfs_warn(mp, "corrupted root inode %llu: not a directory",
(unsigned long long)rip->i_ino);
xfs_iunlock(rip, XFS_ILOCK_EXCL);
error = -EFSCORRUPTED;
goto out_rele_rip;
}
mp->m_rootip = rip; /* save it */
xfs_iunlock(rip, XFS_ILOCK_EXCL);
/*
* Initialize realtime inode pointers in the mount structure
*/
error = xfs_rtmount_inodes(mp);
if (error) {
/*
* Free up the root inode.
*/
xfs_warn(mp, "failed to read RT inodes");
goto out_rele_rip;
}
xfs: recalculate free rt extents after log recovery I've been observing periodic corruption reports from xfs_scrub involving the free rt extent counter (frextents) while running xfs/141. That test uses an error injection knob to induce a torn write to the log, and an arbitrary number of recovery mounts, frextents will count fewer free rt extents than can be found the rtbitmap. The root cause of the problem is a combination of the misuse of sb_frextents in the incore mount to reflect both incore reservations made by running transactions as well as the actual count of free rt extents on disk. The following sequence can reproduce the undercount: Thread 1 Thread 2 xfs_trans_alloc(rtextents=3) xfs_mod_frextents(-3) <blocks> xfs_attr_set() xfs_bmap_attr_addfork() xfs_add_attr2() xfs_log_sb() xfs_sb_to_disk() xfs_trans_commit() <log flushed to disk> <log goes down> Note that thread 1 subtracts 3 from sb_frextents even though it never commits to using that space. Thread 2 writes the undercounted value to the ondisk superblock and logs it to the xattr transaction, which is then flushed to disk. At next mount, log recovery will find the logged superblock and write that back into the filesystem. At the end of log recovery, we reread the superblock and install the recovered undercounted frextents value into the incore superblock. From that point on, we've effectively leaked thread 1's transaction reservation. The correct fix for this is to separate the incore reservation from the ondisk usage, but that's a matter for the next patch. Because the kernel has been logging superblocks with undercounted frextents for a very long time and we don't demand that sysadmins run xfs_repair after a crash, fix the undercount by recomputing frextents after log recovery. Gating this on log recovery is a reasonable balance (I think) between correcting the problem and slowing down every mount attempt. Note that xfs_repair will fix undercounted frextents. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-04-11 20:49:42 +00:00
/* Make sure the summary counts are ok. */
error = xfs_check_summary_counts(mp);
if (error)
goto out_rtunmount;
/*
* If this is a read-only mount defer the superblock updates until
* the next remount into writeable mode. Otherwise we would never
* perform the update e.g. for the root filesystem.
*/
if (mp->m_update_sb && !xfs_is_readonly(mp)) {
error = xfs_sync_sb(mp, false);
if (error) {
xfs_warn(mp, "failed to write sb changes");
goto out_rtunmount;
}
}
/*
* Initialise the XFS quota management subsystem for this mount
*/
if (XFS_IS_QUOTA_ON(mp)) {
error = xfs_qm_newmount(mp, &quotamount, &quotaflags);
if (error)
goto out_rtunmount;
} else {
/*
* If a file system had quotas running earlier, but decided to
* mount without -o uquota/pquota/gquota options, revoke the
* quotachecked license.
*/
if (mp->m_sb.sb_qflags & XFS_ALL_QUOTA_ACCT) {
xfs_notice(mp, "resetting quota flags");
error = xfs_mount_reset_sbqflags(mp);
if (error)
goto out_rtunmount;
}
}
/*
* Finish recovering the file system. This part needed to be delayed
* until after the root and real-time bitmap inodes were consistently
* read in. Temporarily create per-AG space reservations for metadata
* btree shape changes because space freeing transactions (for inode
* inactivation) require the per-AG reservation in lieu of reserving
* blocks.
*/
error = xfs_fs_reserve_ag_blocks(mp);
if (error && error == -ENOSPC)
xfs_warn(mp,
"ENOSPC reserving per-AG metadata pool, log recovery may fail.");
error = xfs_log_mount_finish(mp);
xfs_fs_unreserve_ag_blocks(mp);
if (error) {
xfs_warn(mp, "log mount finish failed");
goto out_rtunmount;
}
xfs: quiesce the filesystem after recovery on readonly mount Recently we've had a number of reports where log recovery on a v5 filesystem has reported corruptions that looked to be caused by recovery being re-run over the top of an already-recovered metadata. This has uncovered a bug in recovery (fixed elsewhere) but the vector that caused this was largely unknown. A kdump test started tripping over this problem - the system would be crashed, the kdump kernel and environment would boot and dump the kernel core image, and then the system would reboot. After reboot, the root filesystem was triggering log recovery and corruptions were being detected. The metadumps indicated the above log recovery issue. What is happening is that the kdump kernel and environment is mounting the root device read-only to find the binaries needed to do it's work. The result of this is that it is running log recovery. However, because there were unlinked files and EFIs to be processed by recovery, the completion of phase 1 of log recovery could not mark the log clean. And because it's a read-only mount, the unmount process does not write records to the log to mark it clean, either. Hence on the next mount of the filesystem, log recovery was run again across all the metadata that had already been recovered and this is what triggered corruption warnings. To avoid this problem, we need to ensure that a read-only mount always updates the log when it completes the second phase of recovery. We already handle this sort of issue with rw->ro remount transitions, so the solution is as simple as quiescing the filesystem at the appropriate time during the mount process. This results in the log being marked clean so the mount behaviour recorded in the logs on repeated RO mounts will change (i.e. log recovery will no longer be run on every mount until a RW mount is done). This is a user visible change in behaviour, but it is harmless. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-09-25 22:21:44 +00:00
/*
* Now the log is fully replayed, we can transition to full read-only
* mode for read-only mounts. This will sync all the metadata and clean
* the log so that the recovery we just performed does not have to be
* replayed again on the next mount.
*
* We use the same quiesce mechanism as the rw->ro remount, as they are
* semantically identical operations.
*/
if (xfs_is_readonly(mp) && !xfs_has_norecovery(mp))
xfs_log_clean(mp);
xfs: quiesce the filesystem after recovery on readonly mount Recently we've had a number of reports where log recovery on a v5 filesystem has reported corruptions that looked to be caused by recovery being re-run over the top of an already-recovered metadata. This has uncovered a bug in recovery (fixed elsewhere) but the vector that caused this was largely unknown. A kdump test started tripping over this problem - the system would be crashed, the kdump kernel and environment would boot and dump the kernel core image, and then the system would reboot. After reboot, the root filesystem was triggering log recovery and corruptions were being detected. The metadumps indicated the above log recovery issue. What is happening is that the kdump kernel and environment is mounting the root device read-only to find the binaries needed to do it's work. The result of this is that it is running log recovery. However, because there were unlinked files and EFIs to be processed by recovery, the completion of phase 1 of log recovery could not mark the log clean. And because it's a read-only mount, the unmount process does not write records to the log to mark it clean, either. Hence on the next mount of the filesystem, log recovery was run again across all the metadata that had already been recovered and this is what triggered corruption warnings. To avoid this problem, we need to ensure that a read-only mount always updates the log when it completes the second phase of recovery. We already handle this sort of issue with rw->ro remount transitions, so the solution is as simple as quiescing the filesystem at the appropriate time during the mount process. This results in the log being marked clean so the mount behaviour recorded in the logs on repeated RO mounts will change (i.e. log recovery will no longer be run on every mount until a RW mount is done). This is a user visible change in behaviour, but it is harmless. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-09-25 22:21:44 +00:00
/*
* Complete the quota initialisation, post-log-replay component.
*/
if (quotamount) {
ASSERT(mp->m_qflags == 0);
mp->m_qflags = quotaflags;
xfs_qm_mount_quotas(mp);
}
/*
* Now we are mounted, reserve a small amount of unused space for
* privileged transactions. This is needed so that transaction
* space required for critical operations can dip into this pool
* when at ENOSPC. This is needed for operations like create with
* attr, unwritten extent conversion at ENOSPC, etc. Data allocations
* are not allowed to use this reserved space.
*
* This may drive us straight to ENOSPC on mount, but that implies
* we were already there on the last unmount. Warn if this occurs.
*/
if (!xfs_is_readonly(mp)) {
error = xfs_reserve_blocks(mp, xfs_default_resblks(mp));
if (error)
xfs_warn(mp,
"Unable to allocate reserve blocks. Continuing without reserve pool.");
/* Reserve AG blocks for future btree expansion. */
error = xfs_fs_reserve_ag_blocks(mp);
if (error && error != -ENOSPC)
goto out_agresv;
}
return 0;
out_agresv:
xfs_fs_unreserve_ag_blocks(mp);
xfs_qm_unmount_quotas(mp);
out_rtunmount:
xfs_rtunmount_inodes(mp);
out_rele_rip:
xfs_irele(rip);
/* Clean out dquots that might be in memory after quotacheck. */
xfs_qm_unmount(mp);
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
/*
* Inactivate all inodes that might still be in memory after a log
* intent recovery failure so that reclaim can free them. Metadata
* inodes and the root directory shouldn't need inactivation, but the
* mount failed for some reason, so pull down all the state and flee.
*/
xfs_inodegc_flush(mp);
/*
* Flush all inode reclamation work and flush the log.
* We have to do this /after/ rtunmount and qm_unmount because those
* two will have scheduled delayed reclaim for the rt/quota inodes.
*
* This is slightly different from the unmountfs call sequence
* because we could be tearing down a partially set up mount. In
* particular, if log_mount_finish fails we bail out without calling
* qm_unmount_quotas and therefore rely on qm_unmount to release the
* quota inodes.
*/
xfs_unmount_flush_inodes(mp);
out_log_dealloc:
xfs_log_mount_cancel(mp);
out_inodegc_shrinker:
xfs: dynamically allocate the xfs-inodegc shrinker In preparation for implementing lockless slab shrink, use new APIs to dynamically allocate the xfs-inodegc shrinker, so that it can be freed asynchronously via RCU. Then it doesn't need to wait for RCU read-side critical section when releasing the struct xfs_mount. Link: https://lkml.kernel.org/r/20230911094444.68966-36-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Mason <clm@fb.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Sterba <dsterba@suse.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 09:44:34 +00:00
shrinker_free(mp->m_inodegc_shrinker);
out_fail_wait:
if (mp->m_logdev_targp && mp->m_logdev_targp != mp->m_ddev_targp)
xfs_buftarg_drain(mp->m_logdev_targp);
xfs_buftarg_drain(mp->m_ddev_targp);
out_free_perag:
xfs_free_perag_range(mp, 0, mp->m_sb.sb_agcount);
out_free_dir:
xfs_da_unmount(mp);
out_remove_uuid:
xfs_uuid_unmount(mp);
out_remove_errortag:
xfs_errortag_del(mp);
out_remove_error_sysfs:
xfs_error_sysfs_del(mp);
out_remove_scrub_stats:
xchk_stats_unregister(mp->m_scrub_stats);
xfs_sysfs_del(&mp->m_stats.xs_kobj);
out_remove_sysfs:
xfs_sysfs_del(&mp->m_kobj);
out:
return error;
}
/*
* This flushes out the inodes,dquots and the superblock, unmounts the
* log and makes sure that incore structures are freed.
*/
void
xfs_unmountfs(
struct xfs_mount *mp)
{
int error;
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
/*
* Perform all on-disk metadata updates required to inactivate inodes
* that the VFS evicted earlier in the unmount process. Freeing inodes
* and discarding CoW fork preallocations can cause shape changes to
* the free inode and refcount btrees, respectively, so we must finish
* this before we discard the metadata space reservations. Metadata
* inodes and the root directory do not require inactivation.
*/
xfs_inodegc_flush(mp);
xfs_blockgc_stop(mp);
xfs_fs_unreserve_ag_blocks(mp);
xfs_qm_unmount_quotas(mp);
xfs_rtunmount_inodes(mp);
xfs_irele(mp->m_rootip);
xfs_unmount_flush_inodes(mp);
xfs_qm_unmount(mp);
/*
* Unreserve any blocks we have so that when we unmount we don't account
* the reserved free space as used. This is really only necessary for
* lazy superblock counting because it trusts the incore superblock
* counters to be absolutely correct on clean unmount.
*
* We don't bother correcting this elsewhere for lazy superblock
* counting because on mount of an unclean filesystem we reconstruct the
* correct counter value and this is irrelevant.
*
* For non-lazy counter filesystems, this doesn't matter at all because
* we only every apply deltas to the superblock and hence the incore
* value does not matter....
*/
error = xfs_reserve_blocks(mp, 0);
if (error)
xfs_warn(mp, "Unable to free reserved block pool. "
"Freespace may not be correct on next mount.");
xfs: fix sb write verify for lazysbcount When lazysbcount is enabled, fsstress and loop mount/unmount test report the following problems: XFS (loop0): SB summary counter sanity check failed XFS (loop0): Metadata corruption detected at xfs_sb_write_verify+0x13b/0x460, xfs_sb block 0x0 XFS (loop0): Unmount and run xfs_repair XFS (loop0): First 128 bytes of corrupted metadata buffer: 00000000: 58 46 53 42 00 00 10 00 00 00 00 00 00 28 00 00 XFSB.........(.. 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00000020: 69 fb 7c cd 5f dc 44 af 85 74 e0 cc d4 e3 34 5a i.|._.D..t....4Z 00000030: 00 00 00 00 00 20 00 06 00 00 00 00 00 00 00 80 ..... .......... 00000040: 00 00 00 00 00 00 00 81 00 00 00 00 00 00 00 82 ................ 00000050: 00 00 00 01 00 0a 00 00 00 00 00 04 00 00 00 00 ................ 00000060: 00 00 0a 00 b4 b5 02 00 02 00 00 08 00 00 00 00 ................ 00000070: 00 00 00 00 00 00 00 00 0c 09 09 03 14 00 00 19 ................ XFS (loop0): Corruption of in-memory data (0x8) detected at _xfs_buf_ioapply +0xe1e/0x10e0 (fs/xfs/xfs_buf.c:1580). Shutting down filesystem. XFS (loop0): Please unmount the filesystem and rectify the problem(s) XFS (loop0): log mount/recovery failed: error -117 XFS (loop0): log mount failed This corruption will shutdown the file system and the file system will no longer be mountable. The following script can reproduce the problem, but it may take a long time. #!/bin/bash device=/dev/sda testdir=/mnt/test round=0 function fail() { echo "$*" exit 1 } mkdir -p $testdir while [ $round -lt 10000 ] do echo "******* round $round ********" mkfs.xfs -f $device mount $device $testdir || fail "mount failed!" fsstress -d $testdir -l 0 -n 10000 -p 4 >/dev/null & sleep 4 killall -w fsstress umount $testdir xfs_repair -e $device > /dev/null if [ $? -eq 2 ];then echo "ERR CODE 2: Dirty log exception during repair." exit 1 fi round=$(($round+1)) done With lazysbcount is enabled, There is no additional lock protection for reading m_ifree and m_icount in xfs_log_sb(), if other cpu modifies the m_ifree, this will make the m_ifree greater than m_icount. For example, consider the following sequence and ifreedelta is postive: CPU0 CPU1 xfs_log_sb xfs_trans_unreserve_and_mod_sb ---------- ------------------------------ percpu_counter_sum(&mp->m_icount) percpu_counter_add_batch(&mp->m_icount, idelta, XFS_ICOUNT_BATCH) percpu_counter_add(&mp->m_ifree, ifreedelta); percpu_counter_sum(&mp->m_ifree) After this, incorrect inode count (sb_ifree > sb_icount) will be writen to the log. In the subsequent writing of sb, incorrect inode count (sb_ifree > sb_icount) will fail to pass the boundary check in xfs_validate_sb_write() that cause the file system shutdown. When lazysbcount is enabled, we don't need to guarantee that Lazy sb counters are completely correct, but we do need to guarantee that sb_ifree <= sb_icount. On the other hand, the constraint that m_ifree <= m_icount must be satisfied any time that there /cannot/ be other threads allocating or freeing inode chunks. If the constraint is violated under these circumstances, sb_i{count,free} (the ondisk superblock inode counters) maybe incorrect and need to be marked sick at unmount, the count will be rebuilt on the next mount. Fixes: 8756a5af1819 ("libxfs: add more bounds checking to sb sanity checks") Signed-off-by: Long Li <leo.lilong@huawei.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2022-11-17 03:20:20 +00:00
xfs_unmount_check(mp);
xfs: only clear log incompat flags at clean unmount While reviewing the online fsck patchset, someone spied the xfs_swapext_can_use_without_log_assistance function and wondered why we go through this inverted-bitmask dance to avoid setting the XFS_SB_FEAT_INCOMPAT_LOG_SWAPEXT feature. (The same principles apply to the logged extended attribute update feature bit in the since-merged LARP series.) The reason for this dance is that xfs_add_incompat_log_feature is an expensive operation -- it forces the log, pushes the AIL, and then if nobody's beaten us to it, sets the feature bit and issues a synchronous write of the primary superblock. That could be a one-time cost amortized over the life of the filesystem, but the log quiesce and cover operations call xfs_clear_incompat_log_features to remove feature bits opportunistically. On a moderately loaded filesystem this leads to us cycling those bits on and off over and over, which hurts performance. Why do we clear the log incompat bits? Back in ~2020 I think Dave and I had a conversation on IRC[2] about what the log incompat bits represent. IIRC in that conversation we decided that the log incompat bits protect unrecovered log items so that old kernels won't try to recover them and barf. Since a clean log has no protected log items, we could clear the bits at cover/quiesce time. As Dave Chinner pointed out in the thread, clearing log incompat bits at unmount time has positive effects for golden root disk image generator setups, since the generator could be running a newer kernel than what gets written to the golden image -- if there are log incompat fields set in the golden image that was generated by a newer kernel/OS image builder then the provisioning host cannot mount the filesystem even though the log is clean and recovery is unnecessary to mount the filesystem. Given that it's expensive to set log incompat bits, we really only want to do that once per bit per mount. Therefore, I propose that we only clear log incompat bits as part of writing a clean unmount record. Do this by adding an operational state flag to the xfs mount that guards whether or not the feature bit clearing can actually take place. This eliminates the l_incompat_users rwsem that we use to protect a log cleaning operation from clearing a feature bit that a frontend thread is trying to set -- this lock adds another way to fail w.r.t. locking. For the swapext series, I shard that into multiple locks just to work around the lockdep complaints, and that's fugly. Link: https://lore.kernel.org/linux-xfs/20240131230043.GA6180@frogsfrogsfrogs/ Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2024-04-15 21:54:06 +00:00
/*
* Indicate that it's ok to clear log incompat bits before cleaning
* the log and writing the unmount record.
*/
xfs_set_done_with_log_incompat(mp);
xfs_log_unmount(mp);
xfs_da_unmount(mp);
xfs_uuid_unmount(mp);
#if defined(DEBUG)
xfs_errortag_clearall(mp);
#endif
xfs: dynamically allocate the xfs-inodegc shrinker In preparation for implementing lockless slab shrink, use new APIs to dynamically allocate the xfs-inodegc shrinker, so that it can be freed asynchronously via RCU. Then it doesn't need to wait for RCU read-side critical section when releasing the struct xfs_mount. Link: https://lkml.kernel.org/r/20230911094444.68966-36-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Mason <clm@fb.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Sterba <dsterba@suse.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 09:44:34 +00:00
shrinker_free(mp->m_inodegc_shrinker);
xfs_free_perag_range(mp, 0, mp->m_sb.sb_agcount);
xfs_errortag_del(mp);
xfs_error_sysfs_del(mp);
xchk_stats_unregister(mp->m_scrub_stats);
xfs_sysfs_del(&mp->m_stats.xs_kobj);
xfs_sysfs_del(&mp->m_kobj);
}
/*
* Determine whether modifications can proceed. The caller specifies the minimum
* freeze level for which modifications should not be allowed. This allows
* certain operations to proceed while the freeze sequence is in progress, if
* necessary.
*/
bool
xfs_fs_writable(
struct xfs_mount *mp,
int level)
[XFS] Lazy Superblock Counters When we have a couple of hundred transactions on the fly at once, they all typically modify the on disk superblock in some way. create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify free block counts. When these counts are modified in a transaction, they must eventually lock the superblock buffer and apply the mods. The buffer then remains locked until the transaction is committed into the incore log buffer. The result of this is that with enough transactions on the fly the incore superblock buffer becomes a bottleneck. The result of contention on the incore superblock buffer is that transaction rates fall - the more pressure that is put on the superblock buffer, the slower things go. The key to removing the contention is to not require the superblock fields in question to be locked. We do that by not marking the superblock dirty in the transaction. IOWs, we modify the incore superblock but do not modify the cached superblock buffer. In short, we do not log superblock modifications to critical fields in the superblock on every transaction. In fact we only do it just before we write the superblock to disk every sync period or just before unmount. This creates an interesting problem - if we don't log or write out the fields in every transaction, then how do the values get recovered after a crash? the answer is simple - we keep enough duplicate, logged information in other structures that we can reconstruct the correct count after log recovery has been performed. It is the AGF and AGI structures that contain the duplicate information; after recovery, we walk every AGI and AGF and sum their individual counters to get the correct value, and we do a transaction into the log to correct them. An optimisation of this is that if we have a clean unmount record, we know the value in the superblock is correct, so we can avoid the summation walk under normal conditions and so mount/recovery times do not change under normal operation. One wrinkle that was discovered during development was that the blocks used in the freespace btrees are never accounted for in the AGF counters. This was once a valid optimisation to make; when the filesystem is full, the free space btrees are empty and consume no space. Hence when it matters, the "accounting" is correct. But that means the when we do the AGF summations, we would not have a correct count and xfs_check would complain. Hence a new counter was added to track the number of blocks used by the free space btrees. This is an *on-disk format change*. As a result of this, lazy superblock counters are a mkfs option and at the moment on linux there is no way to convert an old filesystem. This is possible - xfs_db can be used to twiddle the right bits and then xfs_repair will do the format conversion for you. Similarly, you can convert backwards as well. At some point we'll add functionality to xfs_admin to do the bit twiddling easily.... SGI-PV: 964999 SGI-Modid: xfs-linux-melb:xfs-kern:28652a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-24 05:26:31 +00:00
{
ASSERT(level > SB_UNFROZEN);
if ((mp->m_super->s_writers.frozen >= level) ||
xfs_is_shutdown(mp) || xfs_is_readonly(mp))
return false;
return true;
[XFS] Lazy Superblock Counters When we have a couple of hundred transactions on the fly at once, they all typically modify the on disk superblock in some way. create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify free block counts. When these counts are modified in a transaction, they must eventually lock the superblock buffer and apply the mods. The buffer then remains locked until the transaction is committed into the incore log buffer. The result of this is that with enough transactions on the fly the incore superblock buffer becomes a bottleneck. The result of contention on the incore superblock buffer is that transaction rates fall - the more pressure that is put on the superblock buffer, the slower things go. The key to removing the contention is to not require the superblock fields in question to be locked. We do that by not marking the superblock dirty in the transaction. IOWs, we modify the incore superblock but do not modify the cached superblock buffer. In short, we do not log superblock modifications to critical fields in the superblock on every transaction. In fact we only do it just before we write the superblock to disk every sync period or just before unmount. This creates an interesting problem - if we don't log or write out the fields in every transaction, then how do the values get recovered after a crash? the answer is simple - we keep enough duplicate, logged information in other structures that we can reconstruct the correct count after log recovery has been performed. It is the AGF and AGI structures that contain the duplicate information; after recovery, we walk every AGI and AGF and sum their individual counters to get the correct value, and we do a transaction into the log to correct them. An optimisation of this is that if we have a clean unmount record, we know the value in the superblock is correct, so we can avoid the summation walk under normal conditions and so mount/recovery times do not change under normal operation. One wrinkle that was discovered during development was that the blocks used in the freespace btrees are never accounted for in the AGF counters. This was once a valid optimisation to make; when the filesystem is full, the free space btrees are empty and consume no space. Hence when it matters, the "accounting" is correct. But that means the when we do the AGF summations, we would not have a correct count and xfs_check would complain. Hence a new counter was added to track the number of blocks used by the free space btrees. This is an *on-disk format change*. As a result of this, lazy superblock counters are a mkfs option and at the moment on linux there is no way to convert an old filesystem. This is possible - xfs_db can be used to twiddle the right bits and then xfs_repair will do the format conversion for you. Similarly, you can convert backwards as well. At some point we'll add functionality to xfs_admin to do the bit twiddling easily.... SGI-PV: 964999 SGI-Modid: xfs-linux-melb:xfs-kern:28652a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-24 05:26:31 +00:00
}
void
xfs_add_freecounter(
struct xfs_mount *mp,
struct percpu_counter *counter,
uint64_t delta)
{
bool has_resv_pool = (counter == &mp->m_fdblocks);
uint64_t res_used;
/*
* If the reserve pool is depleted, put blocks back into it first.
* Most of the time the pool is full.
*/
if (!has_resv_pool || mp->m_resblks == mp->m_resblks_avail) {
percpu_counter_add(counter, delta);
return;
}
spin_lock(&mp->m_sb_lock);
res_used = mp->m_resblks - mp->m_resblks_avail;
if (res_used > delta) {
mp->m_resblks_avail += delta;
} else {
delta -= res_used;
mp->m_resblks_avail = mp->m_resblks;
percpu_counter_add(counter, delta);
}
spin_unlock(&mp->m_sb_lock);
}
int
xfs_dec_freecounter(
struct xfs_mount *mp,
struct percpu_counter *counter,
uint64_t delta,
bool rsvd)
{
int64_t lcounter;
uint64_t set_aside = 0;
s32 batch;
bool has_resv_pool;
ASSERT(counter == &mp->m_fdblocks || counter == &mp->m_frextents);
has_resv_pool = (counter == &mp->m_fdblocks);
if (rsvd)
ASSERT(has_resv_pool);
/*
* Taking blocks away, need to be more accurate the closer we
* are to zero.
*
* If the counter has a value of less than 2 * max batch size,
* then make everything serialise as we are real close to
* ENOSPC.
*/
if (__percpu_counter_compare(counter, 2 * XFS_FDBLOCKS_BATCH,
XFS_FDBLOCKS_BATCH) < 0)
batch = 1;
else
batch = XFS_FDBLOCKS_BATCH;
xfs: set aside allocation btree blocks from block reservation The blocks used for allocation btrees (bnobt and countbt) are technically considered free space. This is because as free space is used, allocbt blocks are removed and naturally become available for traditional allocation. However, this means that a significant portion of free space may consist of in-use btree blocks if free space is severely fragmented. On large filesystems with large perag reservations, this can lead to a rare but nasty condition where a significant amount of physical free space is available, but the majority of actual usable blocks consist of in-use allocbt blocks. We have a record of a (~12TB, 32 AG) filesystem with multiple AGs in a state with ~2.5GB or so free blocks tracked across ~300 total allocbt blocks, but effectively at 100% full because the the free space is entirely consumed by refcountbt perag reservation. Such a large perag reservation is by design on large filesystems. The problem is that because the free space is so fragmented, this AG contributes the 300 or so allocbt blocks to the global counters as free space. If this pattern repeats across enough AGs, the filesystem lands in a state where global block reservation can outrun physical block availability. For example, a streaming buffered write on the affected filesystem continues to allow delayed allocation beyond the point where writeback starts to fail due to physical block allocation failures. The expected behavior is for the delalloc block reservation to fail gracefully with -ENOSPC before physical block allocation failure is a possibility. To address this problem, set aside in-use allocbt blocks at reservation time and thus ensure they cannot be reserved until truly available for physical allocation. This allows alloc btree metadata to continue to reside in free space, but dynamically adjusts reservation availability based on internal state. Note that the logic requires that the allocbt counter is fully populated at reservation time before it is fully effective. We currently rely on the mount time AGF scan in the perag reservation initialization code for this dependency on filesystems where it's most important (i.e. with active perag reservations). Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-04-28 22:06:05 +00:00
/*
* Set aside allocbt blocks because these blocks are tracked as free
* space but not available for allocation. Technically this means that a
* single reservation cannot consume all remaining free space, but the
* ratio of allocbt blocks to usable free blocks should be rather small.
* The tradeoff without this is that filesystems that maintain high
* perag block reservations can over reserve physical block availability
* and fail physical allocation, which leads to much more serious
* problems (i.e. transaction abort, pagecache discards, etc.) than
* slightly premature -ENOSPC.
*/
if (has_resv_pool)
set_aside = xfs_fdblocks_unavailable(mp);
percpu_counter_add_batch(counter, -((int64_t)delta), batch);
if (__percpu_counter_compare(counter, set_aside,
XFS_FDBLOCKS_BATCH) >= 0) {
/* we had space! */
return 0;
}
/*
* lock up the sb for dipping into reserves before releasing the space
* that took us to ENOSPC.
*/
spin_lock(&mp->m_sb_lock);
percpu_counter_add(counter, delta);
if (!has_resv_pool || !rsvd)
goto fdblocks_enospc;
lcounter = (long long)mp->m_resblks_avail - delta;
if (lcounter >= 0) {
mp->m_resblks_avail = lcounter;
spin_unlock(&mp->m_sb_lock);
return 0;
}
xfs_warn_once(mp,
"Reserve blocks depleted! Consider increasing reserve pool size.");
fdblocks_enospc:
spin_unlock(&mp->m_sb_lock);
return -ENOSPC;
}
/*
* Used to free the superblock along various error paths.
*/
void
xfs_freesb(
struct xfs_mount *mp)
{
struct xfs_buf *bp = mp->m_sb_bp;
xfs_buf_lock(bp);
mp->m_sb_bp = NULL;
xfs_buf_relse(bp);
}
/*
* If the underlying (data/log/rt) device is readonly, there are some
* operations that cannot proceed.
*/
int
xfs_dev_is_read_only(
struct xfs_mount *mp,
char *message)
{
if (xfs_readonly_buftarg(mp->m_ddev_targp) ||
xfs_readonly_buftarg(mp->m_logdev_targp) ||
(mp->m_rtdev_targp && xfs_readonly_buftarg(mp->m_rtdev_targp))) {
xfs_notice(mp, "%s required on read-only device.", message);
xfs_notice(mp, "write access unavailable, cannot proceed.");
return -EROFS;
}
return 0;
}
/* Force the summary counters to be recalculated at next mount. */
void
xfs_force_summary_recalc(
struct xfs_mount *mp)
{
if (!xfs_has_lazysbcount(mp))
return;
xfs_fs_mark_sick(mp, XFS_SICK_FS_COUNTERS);
}
/*
* Enable a log incompat feature flag in the primary superblock. The caller
* cannot have any other transactions in progress.
*/
int
xfs_add_incompat_log_feature(
struct xfs_mount *mp,
uint32_t feature)
{
struct xfs_dsb *dsb;
int error;
ASSERT(hweight32(feature) == 1);
ASSERT(!(feature & XFS_SB_FEAT_INCOMPAT_LOG_UNKNOWN));
/*
* Force the log to disk and kick the background AIL thread to reduce
* the chances that the bwrite will stall waiting for the AIL to unpin
* the primary superblock buffer. This isn't a data integrity
* operation, so we don't need a synchronous push.
*/
error = xfs_log_force(mp, XFS_LOG_SYNC);
if (error)
return error;
xfs_ail_push_all(mp->m_ail);
/*
* Lock the primary superblock buffer to serialize all callers that
* are trying to set feature bits.
*/
xfs_buf_lock(mp->m_sb_bp);
xfs_buf_hold(mp->m_sb_bp);
if (xfs_is_shutdown(mp)) {
error = -EIO;
goto rele;
}
if (xfs_sb_has_incompat_log_feature(&mp->m_sb, feature))
goto rele;
/*
* Write the primary superblock to disk immediately, because we need
* the log_incompat bit to be set in the primary super now to protect
* the log items that we're going to commit later.
*/
dsb = mp->m_sb_bp->b_addr;
xfs_sb_to_disk(dsb, &mp->m_sb);
dsb->sb_features_log_incompat |= cpu_to_be32(feature);
error = xfs_bwrite(mp->m_sb_bp);
if (error)
goto shutdown;
/*
* Add the feature bits to the incore superblock before we unlock the
* buffer.
*/
xfs_sb_add_incompat_log_features(&mp->m_sb, feature);
xfs_buf_relse(mp->m_sb_bp);
/* Log the superblock to disk. */
return xfs_sync_sb(mp, false);
shutdown:
xfs_force_shutdown(mp, SHUTDOWN_META_IO_ERROR);
rele:
xfs_buf_relse(mp->m_sb_bp);
return error;
}
/*
* Clear all the log incompat flags from the superblock.
*
* The caller cannot be in a transaction, must ensure that the log does not
* contain any log items protected by any log incompat bit, and must ensure
* that there are no other threads that depend on the state of the log incompat
* feature flags in the primary super.
*
* Returns true if the superblock is dirty.
*/
bool
xfs_clear_incompat_log_features(
struct xfs_mount *mp)
{
bool ret = false;
if (!xfs_has_crc(mp) ||
!xfs_sb_has_incompat_log_feature(&mp->m_sb,
XFS_SB_FEAT_INCOMPAT_LOG_ALL) ||
xfs: only clear log incompat flags at clean unmount While reviewing the online fsck patchset, someone spied the xfs_swapext_can_use_without_log_assistance function and wondered why we go through this inverted-bitmask dance to avoid setting the XFS_SB_FEAT_INCOMPAT_LOG_SWAPEXT feature. (The same principles apply to the logged extended attribute update feature bit in the since-merged LARP series.) The reason for this dance is that xfs_add_incompat_log_feature is an expensive operation -- it forces the log, pushes the AIL, and then if nobody's beaten us to it, sets the feature bit and issues a synchronous write of the primary superblock. That could be a one-time cost amortized over the life of the filesystem, but the log quiesce and cover operations call xfs_clear_incompat_log_features to remove feature bits opportunistically. On a moderately loaded filesystem this leads to us cycling those bits on and off over and over, which hurts performance. Why do we clear the log incompat bits? Back in ~2020 I think Dave and I had a conversation on IRC[2] about what the log incompat bits represent. IIRC in that conversation we decided that the log incompat bits protect unrecovered log items so that old kernels won't try to recover them and barf. Since a clean log has no protected log items, we could clear the bits at cover/quiesce time. As Dave Chinner pointed out in the thread, clearing log incompat bits at unmount time has positive effects for golden root disk image generator setups, since the generator could be running a newer kernel than what gets written to the golden image -- if there are log incompat fields set in the golden image that was generated by a newer kernel/OS image builder then the provisioning host cannot mount the filesystem even though the log is clean and recovery is unnecessary to mount the filesystem. Given that it's expensive to set log incompat bits, we really only want to do that once per bit per mount. Therefore, I propose that we only clear log incompat bits as part of writing a clean unmount record. Do this by adding an operational state flag to the xfs mount that guards whether or not the feature bit clearing can actually take place. This eliminates the l_incompat_users rwsem that we use to protect a log cleaning operation from clearing a feature bit that a frontend thread is trying to set -- this lock adds another way to fail w.r.t. locking. For the swapext series, I shard that into multiple locks just to work around the lockdep complaints, and that's fugly. Link: https://lore.kernel.org/linux-xfs/20240131230043.GA6180@frogsfrogsfrogs/ Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2024-04-15 21:54:06 +00:00
xfs_is_shutdown(mp) ||
!xfs_is_done_with_log_incompat(mp))
return false;
/*
* Update the incore superblock. We synchronize on the primary super
* buffer lock to be consistent with the add function, though at least
* in theory this shouldn't be necessary.
*/
xfs_buf_lock(mp->m_sb_bp);
xfs_buf_hold(mp->m_sb_bp);
if (xfs_sb_has_incompat_log_feature(&mp->m_sb,
XFS_SB_FEAT_INCOMPAT_LOG_ALL)) {
xfs_sb_remove_incompat_log_features(&mp->m_sb);
ret = true;
}
xfs_buf_relse(mp->m_sb_bp);
return ret;
}
/*
* Update the in-core delayed block counter.
*
* We prefer to update the counter without having to take a spinlock for every
* counter update (i.e. batching). Each change to delayed allocation
* reservations can change can easily exceed the default percpu counter
* batching, so we use a larger batch factor here.
*
* Note that we don't currently have any callers requiring fast summation
* (e.g. percpu_counter_read) so we can use a big batch value here.
*/
#define XFS_DELALLOC_BATCH (4096)
void
xfs_mod_delalloc(
struct xfs_inode *ip,
int64_t data_delta,
int64_t ind_delta)
{
struct xfs_mount *mp = ip->i_mount;
if (XFS_IS_REALTIME_INODE(ip)) {
percpu_counter_add_batch(&mp->m_delalloc_rtextents,
xfs_rtb_to_rtx(mp, data_delta),
XFS_DELALLOC_BATCH);
if (!ind_delta)
return;
data_delta = 0;
}
percpu_counter_add_batch(&mp->m_delalloc_blks, data_delta + ind_delta,
XFS_DELALLOC_BATCH);
}