linux/drivers/usb/host/ehci-tegra.c

629 lines
16 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* EHCI-compliant USB host controller driver for NVIDIA Tegra SoCs
*
* Copyright (C) 2010 Google, Inc.
* Copyright (C) 2009 - 2013 NVIDIA Corporation
*/
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>
#include <linux/slab.h>
#include <linux/usb/ehci_def.h>
#include <linux/usb/tegra_usb_phy.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/usb/otg.h>
#include "ehci.h"
#define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)
#define TEGRA_USB_DMA_ALIGN 32
#define DRIVER_DESC "Tegra EHCI driver"
#define DRV_NAME "tegra-ehci"
static struct hc_driver __read_mostly tegra_ehci_hc_driver;
static bool usb1_reset_attempted;
struct tegra_ehci_soc_config {
bool has_hostpc;
};
struct tegra_ehci_hcd {
struct tegra_usb_phy *phy;
struct clk *clk;
struct reset_control *rst;
int port_resuming;
bool needs_double_reset;
enum tegra_usb_phy_port_speed port_speed;
};
/*
* The 1st USB controller contains some UTMI pad registers that are global for
* all the controllers on the chip. Those registers are also cleared when
* reset is asserted to the 1st controller. This means that the 1st controller
* can only be reset when no other controlled has finished probing. So we'll
* reset the 1st controller before doing any other setup on any of the
* controllers, and then never again.
*
* Since this is a PHY issue, the Tegra PHY driver should probably be doing
* the resetting of the USB controllers. But to keep compatibility with old
* device trees that don't have reset phandles in the PHYs, do it here.
* Those old DTs will be vulnerable to total USB breakage if the 1st EHCI
* device isn't the first one to finish probing, so warn them.
*/
static int tegra_reset_usb_controller(struct platform_device *pdev)
{
struct device_node *phy_np;
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct tegra_ehci_hcd *tegra =
(struct tegra_ehci_hcd *)hcd_to_ehci(hcd)->priv;
usb: host: ehci-tegra: Avoid getting the same reset twice Starting with commit 0b52297f2288 ("reset: Add support for shared reset controls") there is a reference count for reset control assertions. The goal is to allow resets to be shared by multiple devices and an assert will take effect only when all instances have asserted the reset. In order to preserve backwards-compatibility, all reset controls become exclusive by default. This is to ensure that reset_control_assert() can immediately assert in hardware. However, this new behaviour triggers the following warning in the EHCI driver for Tegra: [ 3.365019] ------------[ cut here ]------------ [ 3.369639] WARNING: CPU: 0 PID: 1 at drivers/reset/core.c:187 __of_reset_control_get+0x16c/0x23c [ 3.382151] Modules linked in: [ 3.385214] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc6-next-20160503 #140 [ 3.392769] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [ 3.399046] [<c010fa50>] (unwind_backtrace) from [<c010b120>] (show_stack+0x10/0x14) [ 3.406787] [<c010b120>] (show_stack) from [<c0347dcc>] (dump_stack+0x90/0xa4) [ 3.414007] [<c0347dcc>] (dump_stack) from [<c011f4fc>] (__warn+0xe8/0x100) [ 3.420964] [<c011f4fc>] (__warn) from [<c011f5c4>] (warn_slowpath_null+0x20/0x28) [ 3.428525] [<c011f5c4>] (warn_slowpath_null) from [<c03cc8cc>] (__of_reset_control_get+0x16c/0x23c) [ 3.437648] [<c03cc8cc>] (__of_reset_control_get) from [<c0526858>] (tegra_ehci_probe+0x394/0x518) [ 3.446600] [<c0526858>] (tegra_ehci_probe) from [<c04516d8>] (platform_drv_probe+0x4c/0xb0) [ 3.455029] [<c04516d8>] (platform_drv_probe) from [<c044fe78>] (driver_probe_device+0x1ec/0x330) [ 3.463892] [<c044fe78>] (driver_probe_device) from [<c0450074>] (__driver_attach+0xb8/0xbc) [ 3.472320] [<c0450074>] (__driver_attach) from [<c044e1ec>] (bus_for_each_dev+0x68/0x9c) [ 3.480489] [<c044e1ec>] (bus_for_each_dev) from [<c044f338>] (bus_add_driver+0x1a0/0x218) [ 3.488743] [<c044f338>] (bus_add_driver) from [<c0450768>] (driver_register+0x78/0xf8) [ 3.496738] [<c0450768>] (driver_register) from [<c010178c>] (do_one_initcall+0x40/0x170) [ 3.504909] [<c010178c>] (do_one_initcall) from [<c0c00ddc>] (kernel_init_freeable+0x158/0x1f8) [ 3.513600] [<c0c00ddc>] (kernel_init_freeable) from [<c0810784>] (kernel_init+0x8/0x114) [ 3.521770] [<c0810784>] (kernel_init) from [<c0107778>] (ret_from_fork+0x14/0x3c) [ 3.529361] ---[ end trace 4bda87dbe4ecef8a ]--- The reason is that Tegra SoCs have three EHCI controllers, each with a separate reset line. However the first controller contains UTMI pads configuration registers that are shared with its siblings and that are reset as part of the first controller's reset. There is special code in the driver to assert and deassert this shared reset at probe time, and it does so irrespective of which controller is probed first to ensure that these shared registers are reset before any of the controllers are initialized. Unfortunately this means that if the first controller gets probed first, it will request its own reset line and will subsequently request the same reset line again (temporarily) to perform the reset. This used to work fine before the above-mentioned commit, but now triggers the new WARN. Work around this by making sure we reuse the controller's reset if the controller happens to be the first controller. Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-26 15:23:30 +00:00
bool has_utmi_pad_registers = false;
phy_np = of_parse_phandle(pdev->dev.of_node, "nvidia,phy", 0);
if (!phy_np)
return -ENOENT;
usb: host: ehci-tegra: Avoid getting the same reset twice Starting with commit 0b52297f2288 ("reset: Add support for shared reset controls") there is a reference count for reset control assertions. The goal is to allow resets to be shared by multiple devices and an assert will take effect only when all instances have asserted the reset. In order to preserve backwards-compatibility, all reset controls become exclusive by default. This is to ensure that reset_control_assert() can immediately assert in hardware. However, this new behaviour triggers the following warning in the EHCI driver for Tegra: [ 3.365019] ------------[ cut here ]------------ [ 3.369639] WARNING: CPU: 0 PID: 1 at drivers/reset/core.c:187 __of_reset_control_get+0x16c/0x23c [ 3.382151] Modules linked in: [ 3.385214] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc6-next-20160503 #140 [ 3.392769] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [ 3.399046] [<c010fa50>] (unwind_backtrace) from [<c010b120>] (show_stack+0x10/0x14) [ 3.406787] [<c010b120>] (show_stack) from [<c0347dcc>] (dump_stack+0x90/0xa4) [ 3.414007] [<c0347dcc>] (dump_stack) from [<c011f4fc>] (__warn+0xe8/0x100) [ 3.420964] [<c011f4fc>] (__warn) from [<c011f5c4>] (warn_slowpath_null+0x20/0x28) [ 3.428525] [<c011f5c4>] (warn_slowpath_null) from [<c03cc8cc>] (__of_reset_control_get+0x16c/0x23c) [ 3.437648] [<c03cc8cc>] (__of_reset_control_get) from [<c0526858>] (tegra_ehci_probe+0x394/0x518) [ 3.446600] [<c0526858>] (tegra_ehci_probe) from [<c04516d8>] (platform_drv_probe+0x4c/0xb0) [ 3.455029] [<c04516d8>] (platform_drv_probe) from [<c044fe78>] (driver_probe_device+0x1ec/0x330) [ 3.463892] [<c044fe78>] (driver_probe_device) from [<c0450074>] (__driver_attach+0xb8/0xbc) [ 3.472320] [<c0450074>] (__driver_attach) from [<c044e1ec>] (bus_for_each_dev+0x68/0x9c) [ 3.480489] [<c044e1ec>] (bus_for_each_dev) from [<c044f338>] (bus_add_driver+0x1a0/0x218) [ 3.488743] [<c044f338>] (bus_add_driver) from [<c0450768>] (driver_register+0x78/0xf8) [ 3.496738] [<c0450768>] (driver_register) from [<c010178c>] (do_one_initcall+0x40/0x170) [ 3.504909] [<c010178c>] (do_one_initcall) from [<c0c00ddc>] (kernel_init_freeable+0x158/0x1f8) [ 3.513600] [<c0c00ddc>] (kernel_init_freeable) from [<c0810784>] (kernel_init+0x8/0x114) [ 3.521770] [<c0810784>] (kernel_init) from [<c0107778>] (ret_from_fork+0x14/0x3c) [ 3.529361] ---[ end trace 4bda87dbe4ecef8a ]--- The reason is that Tegra SoCs have three EHCI controllers, each with a separate reset line. However the first controller contains UTMI pads configuration registers that are shared with its siblings and that are reset as part of the first controller's reset. There is special code in the driver to assert and deassert this shared reset at probe time, and it does so irrespective of which controller is probed first to ensure that these shared registers are reset before any of the controllers are initialized. Unfortunately this means that if the first controller gets probed first, it will request its own reset line and will subsequently request the same reset line again (temporarily) to perform the reset. This used to work fine before the above-mentioned commit, but now triggers the new WARN. Work around this by making sure we reuse the controller's reset if the controller happens to be the first controller. Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-26 15:23:30 +00:00
if (of_property_read_bool(phy_np, "nvidia,has-utmi-pad-registers"))
has_utmi_pad_registers = true;
if (!usb1_reset_attempted) {
struct reset_control *usb1_reset;
usb: host: ehci-tegra: Avoid getting the same reset twice Starting with commit 0b52297f2288 ("reset: Add support for shared reset controls") there is a reference count for reset control assertions. The goal is to allow resets to be shared by multiple devices and an assert will take effect only when all instances have asserted the reset. In order to preserve backwards-compatibility, all reset controls become exclusive by default. This is to ensure that reset_control_assert() can immediately assert in hardware. However, this new behaviour triggers the following warning in the EHCI driver for Tegra: [ 3.365019] ------------[ cut here ]------------ [ 3.369639] WARNING: CPU: 0 PID: 1 at drivers/reset/core.c:187 __of_reset_control_get+0x16c/0x23c [ 3.382151] Modules linked in: [ 3.385214] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc6-next-20160503 #140 [ 3.392769] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [ 3.399046] [<c010fa50>] (unwind_backtrace) from [<c010b120>] (show_stack+0x10/0x14) [ 3.406787] [<c010b120>] (show_stack) from [<c0347dcc>] (dump_stack+0x90/0xa4) [ 3.414007] [<c0347dcc>] (dump_stack) from [<c011f4fc>] (__warn+0xe8/0x100) [ 3.420964] [<c011f4fc>] (__warn) from [<c011f5c4>] (warn_slowpath_null+0x20/0x28) [ 3.428525] [<c011f5c4>] (warn_slowpath_null) from [<c03cc8cc>] (__of_reset_control_get+0x16c/0x23c) [ 3.437648] [<c03cc8cc>] (__of_reset_control_get) from [<c0526858>] (tegra_ehci_probe+0x394/0x518) [ 3.446600] [<c0526858>] (tegra_ehci_probe) from [<c04516d8>] (platform_drv_probe+0x4c/0xb0) [ 3.455029] [<c04516d8>] (platform_drv_probe) from [<c044fe78>] (driver_probe_device+0x1ec/0x330) [ 3.463892] [<c044fe78>] (driver_probe_device) from [<c0450074>] (__driver_attach+0xb8/0xbc) [ 3.472320] [<c0450074>] (__driver_attach) from [<c044e1ec>] (bus_for_each_dev+0x68/0x9c) [ 3.480489] [<c044e1ec>] (bus_for_each_dev) from [<c044f338>] (bus_add_driver+0x1a0/0x218) [ 3.488743] [<c044f338>] (bus_add_driver) from [<c0450768>] (driver_register+0x78/0xf8) [ 3.496738] [<c0450768>] (driver_register) from [<c010178c>] (do_one_initcall+0x40/0x170) [ 3.504909] [<c010178c>] (do_one_initcall) from [<c0c00ddc>] (kernel_init_freeable+0x158/0x1f8) [ 3.513600] [<c0c00ddc>] (kernel_init_freeable) from [<c0810784>] (kernel_init+0x8/0x114) [ 3.521770] [<c0810784>] (kernel_init) from [<c0107778>] (ret_from_fork+0x14/0x3c) [ 3.529361] ---[ end trace 4bda87dbe4ecef8a ]--- The reason is that Tegra SoCs have three EHCI controllers, each with a separate reset line. However the first controller contains UTMI pads configuration registers that are shared with its siblings and that are reset as part of the first controller's reset. There is special code in the driver to assert and deassert this shared reset at probe time, and it does so irrespective of which controller is probed first to ensure that these shared registers are reset before any of the controllers are initialized. Unfortunately this means that if the first controller gets probed first, it will request its own reset line and will subsequently request the same reset line again (temporarily) to perform the reset. This used to work fine before the above-mentioned commit, but now triggers the new WARN. Work around this by making sure we reuse the controller's reset if the controller happens to be the first controller. Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-26 15:23:30 +00:00
if (!has_utmi_pad_registers)
usb1_reset = of_reset_control_get(phy_np, "utmi-pads");
else
usb1_reset = tegra->rst;
if (IS_ERR(usb1_reset)) {
dev_warn(&pdev->dev,
"can't get utmi-pads reset from the PHY\n");
dev_warn(&pdev->dev,
"continuing, but please update your DT\n");
} else {
reset_control_assert(usb1_reset);
udelay(1);
reset_control_deassert(usb1_reset);
usb: host: ehci-tegra: Avoid getting the same reset twice Starting with commit 0b52297f2288 ("reset: Add support for shared reset controls") there is a reference count for reset control assertions. The goal is to allow resets to be shared by multiple devices and an assert will take effect only when all instances have asserted the reset. In order to preserve backwards-compatibility, all reset controls become exclusive by default. This is to ensure that reset_control_assert() can immediately assert in hardware. However, this new behaviour triggers the following warning in the EHCI driver for Tegra: [ 3.365019] ------------[ cut here ]------------ [ 3.369639] WARNING: CPU: 0 PID: 1 at drivers/reset/core.c:187 __of_reset_control_get+0x16c/0x23c [ 3.382151] Modules linked in: [ 3.385214] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc6-next-20160503 #140 [ 3.392769] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [ 3.399046] [<c010fa50>] (unwind_backtrace) from [<c010b120>] (show_stack+0x10/0x14) [ 3.406787] [<c010b120>] (show_stack) from [<c0347dcc>] (dump_stack+0x90/0xa4) [ 3.414007] [<c0347dcc>] (dump_stack) from [<c011f4fc>] (__warn+0xe8/0x100) [ 3.420964] [<c011f4fc>] (__warn) from [<c011f5c4>] (warn_slowpath_null+0x20/0x28) [ 3.428525] [<c011f5c4>] (warn_slowpath_null) from [<c03cc8cc>] (__of_reset_control_get+0x16c/0x23c) [ 3.437648] [<c03cc8cc>] (__of_reset_control_get) from [<c0526858>] (tegra_ehci_probe+0x394/0x518) [ 3.446600] [<c0526858>] (tegra_ehci_probe) from [<c04516d8>] (platform_drv_probe+0x4c/0xb0) [ 3.455029] [<c04516d8>] (platform_drv_probe) from [<c044fe78>] (driver_probe_device+0x1ec/0x330) [ 3.463892] [<c044fe78>] (driver_probe_device) from [<c0450074>] (__driver_attach+0xb8/0xbc) [ 3.472320] [<c0450074>] (__driver_attach) from [<c044e1ec>] (bus_for_each_dev+0x68/0x9c) [ 3.480489] [<c044e1ec>] (bus_for_each_dev) from [<c044f338>] (bus_add_driver+0x1a0/0x218) [ 3.488743] [<c044f338>] (bus_add_driver) from [<c0450768>] (driver_register+0x78/0xf8) [ 3.496738] [<c0450768>] (driver_register) from [<c010178c>] (do_one_initcall+0x40/0x170) [ 3.504909] [<c010178c>] (do_one_initcall) from [<c0c00ddc>] (kernel_init_freeable+0x158/0x1f8) [ 3.513600] [<c0c00ddc>] (kernel_init_freeable) from [<c0810784>] (kernel_init+0x8/0x114) [ 3.521770] [<c0810784>] (kernel_init) from [<c0107778>] (ret_from_fork+0x14/0x3c) [ 3.529361] ---[ end trace 4bda87dbe4ecef8a ]--- The reason is that Tegra SoCs have three EHCI controllers, each with a separate reset line. However the first controller contains UTMI pads configuration registers that are shared with its siblings and that are reset as part of the first controller's reset. There is special code in the driver to assert and deassert this shared reset at probe time, and it does so irrespective of which controller is probed first to ensure that these shared registers are reset before any of the controllers are initialized. Unfortunately this means that if the first controller gets probed first, it will request its own reset line and will subsequently request the same reset line again (temporarily) to perform the reset. This used to work fine before the above-mentioned commit, but now triggers the new WARN. Work around this by making sure we reuse the controller's reset if the controller happens to be the first controller. Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-26 15:23:30 +00:00
if (!has_utmi_pad_registers)
reset_control_put(usb1_reset);
}
usb1_reset_attempted = true;
}
usb: host: ehci-tegra: Avoid getting the same reset twice Starting with commit 0b52297f2288 ("reset: Add support for shared reset controls") there is a reference count for reset control assertions. The goal is to allow resets to be shared by multiple devices and an assert will take effect only when all instances have asserted the reset. In order to preserve backwards-compatibility, all reset controls become exclusive by default. This is to ensure that reset_control_assert() can immediately assert in hardware. However, this new behaviour triggers the following warning in the EHCI driver for Tegra: [ 3.365019] ------------[ cut here ]------------ [ 3.369639] WARNING: CPU: 0 PID: 1 at drivers/reset/core.c:187 __of_reset_control_get+0x16c/0x23c [ 3.382151] Modules linked in: [ 3.385214] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc6-next-20160503 #140 [ 3.392769] Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) [ 3.399046] [<c010fa50>] (unwind_backtrace) from [<c010b120>] (show_stack+0x10/0x14) [ 3.406787] [<c010b120>] (show_stack) from [<c0347dcc>] (dump_stack+0x90/0xa4) [ 3.414007] [<c0347dcc>] (dump_stack) from [<c011f4fc>] (__warn+0xe8/0x100) [ 3.420964] [<c011f4fc>] (__warn) from [<c011f5c4>] (warn_slowpath_null+0x20/0x28) [ 3.428525] [<c011f5c4>] (warn_slowpath_null) from [<c03cc8cc>] (__of_reset_control_get+0x16c/0x23c) [ 3.437648] [<c03cc8cc>] (__of_reset_control_get) from [<c0526858>] (tegra_ehci_probe+0x394/0x518) [ 3.446600] [<c0526858>] (tegra_ehci_probe) from [<c04516d8>] (platform_drv_probe+0x4c/0xb0) [ 3.455029] [<c04516d8>] (platform_drv_probe) from [<c044fe78>] (driver_probe_device+0x1ec/0x330) [ 3.463892] [<c044fe78>] (driver_probe_device) from [<c0450074>] (__driver_attach+0xb8/0xbc) [ 3.472320] [<c0450074>] (__driver_attach) from [<c044e1ec>] (bus_for_each_dev+0x68/0x9c) [ 3.480489] [<c044e1ec>] (bus_for_each_dev) from [<c044f338>] (bus_add_driver+0x1a0/0x218) [ 3.488743] [<c044f338>] (bus_add_driver) from [<c0450768>] (driver_register+0x78/0xf8) [ 3.496738] [<c0450768>] (driver_register) from [<c010178c>] (do_one_initcall+0x40/0x170) [ 3.504909] [<c010178c>] (do_one_initcall) from [<c0c00ddc>] (kernel_init_freeable+0x158/0x1f8) [ 3.513600] [<c0c00ddc>] (kernel_init_freeable) from [<c0810784>] (kernel_init+0x8/0x114) [ 3.521770] [<c0810784>] (kernel_init) from [<c0107778>] (ret_from_fork+0x14/0x3c) [ 3.529361] ---[ end trace 4bda87dbe4ecef8a ]--- The reason is that Tegra SoCs have three EHCI controllers, each with a separate reset line. However the first controller contains UTMI pads configuration registers that are shared with its siblings and that are reset as part of the first controller's reset. There is special code in the driver to assert and deassert this shared reset at probe time, and it does so irrespective of which controller is probed first to ensure that these shared registers are reset before any of the controllers are initialized. Unfortunately this means that if the first controller gets probed first, it will request its own reset line and will subsequently request the same reset line again (temporarily) to perform the reset. This used to work fine before the above-mentioned commit, but now triggers the new WARN. Work around this by making sure we reuse the controller's reset if the controller happens to be the first controller. Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-26 15:23:30 +00:00
if (!has_utmi_pad_registers) {
reset_control_assert(tegra->rst);
udelay(1);
reset_control_deassert(tegra->rst);
}
of_node_put(phy_np);
return 0;
}
static int tegra_ehci_internal_port_reset(
struct ehci_hcd *ehci,
u32 __iomem *portsc_reg
)
{
u32 temp;
unsigned long flags;
int retval = 0;
int i, tries;
u32 saved_usbintr;
spin_lock_irqsave(&ehci->lock, flags);
saved_usbintr = ehci_readl(ehci, &ehci->regs->intr_enable);
/* disable USB interrupt */
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
spin_unlock_irqrestore(&ehci->lock, flags);
/*
* Here we have to do Port Reset at most twice for
* Port Enable bit to be set.
*/
for (i = 0; i < 2; i++) {
temp = ehci_readl(ehci, portsc_reg);
temp |= PORT_RESET;
ehci_writel(ehci, temp, portsc_reg);
mdelay(10);
temp &= ~PORT_RESET;
ehci_writel(ehci, temp, portsc_reg);
mdelay(1);
tries = 100;
do {
mdelay(1);
/*
* Up to this point, Port Enable bit is
* expected to be set after 2 ms waiting.
* USB1 usually takes extra 45 ms, for safety,
* we take 100 ms as timeout.
*/
temp = ehci_readl(ehci, portsc_reg);
} while (!(temp & PORT_PE) && tries--);
if (temp & PORT_PE)
break;
}
if (i == 2)
retval = -ETIMEDOUT;
/*
* Clear Connect Status Change bit if it's set.
* We can't clear PORT_PEC. It will also cause PORT_PE to be cleared.
*/
if (temp & PORT_CSC)
ehci_writel(ehci, PORT_CSC, portsc_reg);
/*
* Write to clear any interrupt status bits that might be set
* during port reset.
*/
temp = ehci_readl(ehci, &ehci->regs->status);
ehci_writel(ehci, temp, &ehci->regs->status);
/* restore original interrupt enable bits */
ehci_writel(ehci, saved_usbintr, &ehci->regs->intr_enable);
return retval;
}
static int tegra_ehci_hub_control(
struct usb_hcd *hcd,
u16 typeReq,
u16 wValue,
u16 wIndex,
char *buf,
u16 wLength
)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct tegra_ehci_hcd *tegra = (struct tegra_ehci_hcd *)ehci->priv;
u32 __iomem *status_reg;
u32 temp;
unsigned long flags;
int retval = 0;
status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1];
spin_lock_irqsave(&ehci->lock, flags);
if (typeReq == GetPortStatus) {
temp = ehci_readl(ehci, status_reg);
if (tegra->port_resuming && !(temp & PORT_SUSPEND)) {
/* Resume completed, re-enable disconnect detection */
tegra->port_resuming = 0;
tegra_usb_phy_postresume(hcd->usb_phy);
}
}
else if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) {
temp = ehci_readl(ehci, status_reg);
if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) {
retval = -EPIPE;
goto done;
}
temp &= ~(PORT_RWC_BITS | PORT_WKCONN_E);
temp |= PORT_WKDISC_E | PORT_WKOC_E;
ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
/*
* If a transaction is in progress, there may be a delay in
* suspending the port. Poll until the port is suspended.
*/
if (ehci_handshake(ehci, status_reg, PORT_SUSPEND,
PORT_SUSPEND, 5000))
pr_err("%s: timeout waiting for SUSPEND\n", __func__);
set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports);
goto done;
}
/* For USB1 port we need to issue Port Reset twice internally */
if (tegra->needs_double_reset &&
(typeReq == SetPortFeature && wValue == USB_PORT_FEAT_RESET)) {
spin_unlock_irqrestore(&ehci->lock, flags);
return tegra_ehci_internal_port_reset(ehci, status_reg);
}
/*
* Tegra host controller will time the resume operation to clear the bit
* when the port control state switches to HS or FS Idle. This behavior
* is different from EHCI where the host controller driver is required
* to set this bit to a zero after the resume duration is timed in the
* driver.
*/
else if (typeReq == ClearPortFeature &&
wValue == USB_PORT_FEAT_SUSPEND) {
temp = ehci_readl(ehci, status_reg);
if ((temp & PORT_RESET) || !(temp & PORT_PE)) {
retval = -EPIPE;
goto done;
}
if (!(temp & PORT_SUSPEND))
goto done;
/* Disable disconnect detection during port resume */
tegra_usb_phy_preresume(hcd->usb_phy);
ehci->reset_done[wIndex-1] = jiffies + msecs_to_jiffies(25);
temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
/* start resume signalling */
ehci_writel(ehci, temp | PORT_RESUME, status_reg);
set_bit(wIndex-1, &ehci->resuming_ports);
spin_unlock_irqrestore(&ehci->lock, flags);
msleep(20);
spin_lock_irqsave(&ehci->lock, flags);
/* Poll until the controller clears RESUME and SUSPEND */
if (ehci_handshake(ehci, status_reg, PORT_RESUME, 0, 2000))
pr_err("%s: timeout waiting for RESUME\n", __func__);
if (ehci_handshake(ehci, status_reg, PORT_SUSPEND, 0, 2000))
pr_err("%s: timeout waiting for SUSPEND\n", __func__);
ehci->reset_done[wIndex-1] = 0;
clear_bit(wIndex-1, &ehci->resuming_ports);
tegra->port_resuming = 1;
goto done;
}
spin_unlock_irqrestore(&ehci->lock, flags);
/* Handle the hub control events here */
return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
done:
spin_unlock_irqrestore(&ehci->lock, flags);
return retval;
}
struct dma_aligned_buffer {
void *kmalloc_ptr;
void *old_xfer_buffer;
u8 data[0];
};
static void free_dma_aligned_buffer(struct urb *urb)
{
struct dma_aligned_buffer *temp;
size_t length;
if (!(urb->transfer_flags & URB_ALIGNED_TEMP_BUFFER))
return;
temp = container_of(urb->transfer_buffer,
struct dma_aligned_buffer, data);
if (usb_urb_dir_in(urb)) {
if (usb_pipeisoc(urb->pipe))
length = urb->transfer_buffer_length;
else
length = urb->actual_length;
memcpy(temp->old_xfer_buffer, temp->data, length);
}
urb->transfer_buffer = temp->old_xfer_buffer;
kfree(temp->kmalloc_ptr);
urb->transfer_flags &= ~URB_ALIGNED_TEMP_BUFFER;
}
static int alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags)
{
struct dma_aligned_buffer *temp, *kmalloc_ptr;
size_t kmalloc_size;
if (urb->num_sgs || urb->sg ||
urb->transfer_buffer_length == 0 ||
!((uintptr_t)urb->transfer_buffer & (TEGRA_USB_DMA_ALIGN - 1)))
return 0;
/* Allocate a buffer with enough padding for alignment */
kmalloc_size = urb->transfer_buffer_length +
sizeof(struct dma_aligned_buffer) + TEGRA_USB_DMA_ALIGN - 1;
kmalloc_ptr = kmalloc(kmalloc_size, mem_flags);
if (!kmalloc_ptr)
return -ENOMEM;
/* Position our struct dma_aligned_buffer such that data is aligned */
temp = PTR_ALIGN(kmalloc_ptr + 1, TEGRA_USB_DMA_ALIGN) - 1;
temp->kmalloc_ptr = kmalloc_ptr;
temp->old_xfer_buffer = urb->transfer_buffer;
if (usb_urb_dir_out(urb))
memcpy(temp->data, urb->transfer_buffer,
urb->transfer_buffer_length);
urb->transfer_buffer = temp->data;
urb->transfer_flags |= URB_ALIGNED_TEMP_BUFFER;
return 0;
}
static int tegra_ehci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
gfp_t mem_flags)
{
int ret;
ret = alloc_dma_aligned_buffer(urb, mem_flags);
if (ret)
return ret;
ret = usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
if (ret)
free_dma_aligned_buffer(urb);
return ret;
}
static void tegra_ehci_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
{
usb_hcd_unmap_urb_for_dma(hcd, urb);
free_dma_aligned_buffer(urb);
}
static const struct tegra_ehci_soc_config tegra30_soc_config = {
.has_hostpc = true,
};
static const struct tegra_ehci_soc_config tegra20_soc_config = {
.has_hostpc = false,
};
static const struct of_device_id tegra_ehci_of_match[] = {
{ .compatible = "nvidia,tegra30-ehci", .data = &tegra30_soc_config },
{ .compatible = "nvidia,tegra20-ehci", .data = &tegra20_soc_config },
{ },
};
static int tegra_ehci_probe(struct platform_device *pdev)
{
const struct of_device_id *match;
const struct tegra_ehci_soc_config *soc_config;
struct resource *res;
struct usb_hcd *hcd;
struct ehci_hcd *ehci;
struct tegra_ehci_hcd *tegra;
int err = 0;
int irq;
struct usb_phy *u_phy;
match = of_match_device(tegra_ehci_of_match, &pdev->dev);
if (!match) {
dev_err(&pdev->dev, "Error: No device match found\n");
return -ENODEV;
}
soc_config = match->data;
/* Right now device-tree probed devices don't get dma_mask set.
* Since shared usb code relies on it, set it here for now.
* Once we have dma capability bindings this can go away.
*/
err = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (err)
return err;
hcd = usb_create_hcd(&tegra_ehci_hc_driver, &pdev->dev,
dev_name(&pdev->dev));
if (!hcd) {
dev_err(&pdev->dev, "Unable to create HCD\n");
return -ENOMEM;
}
platform_set_drvdata(pdev, hcd);
ehci = hcd_to_ehci(hcd);
tegra = (struct tegra_ehci_hcd *)ehci->priv;
hcd->has_tt = 1;
tegra->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(tegra->clk)) {
dev_err(&pdev->dev, "Can't get ehci clock\n");
err = PTR_ERR(tegra->clk);
goto cleanup_hcd_create;
}
tegra->rst = devm_reset_control_get(&pdev->dev, "usb");
if (IS_ERR(tegra->rst)) {
dev_err(&pdev->dev, "Can't get ehci reset\n");
err = PTR_ERR(tegra->rst);
goto cleanup_hcd_create;
}
err = clk_prepare_enable(tegra->clk);
if (err)
goto cleanup_hcd_create;
err = tegra_reset_usb_controller(pdev);
if (err)
goto cleanup_clk_en;
u_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "nvidia,phy", 0);
if (IS_ERR(u_phy)) {
err = -EPROBE_DEFER;
goto cleanup_clk_en;
}
hcd->usb_phy = u_phy;
hcd->skip_phy_initialization = 1;
tegra->needs_double_reset = of_property_read_bool(pdev->dev.of_node,
"nvidia,needs-double-reset");
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hcd->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(hcd->regs)) {
err = PTR_ERR(hcd->regs);
goto cleanup_clk_en;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
ehci->caps = hcd->regs + 0x100;
ehci->has_hostpc = soc_config->has_hostpc;
err = usb_phy_init(hcd->usb_phy);
if (err) {
dev_err(&pdev->dev, "Failed to initialize phy\n");
goto cleanup_clk_en;
}
u_phy->otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg),
GFP_KERNEL);
if (!u_phy->otg) {
err = -ENOMEM;
goto cleanup_phy;
}
u_phy->otg->host = hcd_to_bus(hcd);
err = usb_phy_set_suspend(hcd->usb_phy, 0);
if (err) {
dev_err(&pdev->dev, "Failed to power on the phy\n");
goto cleanup_phy;
}
irq = platform_get_irq(pdev, 0);
if (!irq) {
dev_err(&pdev->dev, "Failed to get IRQ\n");
err = -ENODEV;
goto cleanup_phy;
}
otg_set_host(u_phy->otg, &hcd->self);
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (err) {
dev_err(&pdev->dev, "Failed to add USB HCD\n");
goto cleanup_otg_set_host;
}
device_wakeup_enable(hcd->self.controller);
return err;
cleanup_otg_set_host:
otg_set_host(u_phy->otg, NULL);
cleanup_phy:
usb_phy_shutdown(hcd->usb_phy);
cleanup_clk_en:
clk_disable_unprepare(tegra->clk);
cleanup_hcd_create:
usb_put_hcd(hcd);
return err;
}
static int tegra_ehci_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct tegra_ehci_hcd *tegra =
(struct tegra_ehci_hcd *)hcd_to_ehci(hcd)->priv;
otg_set_host(hcd->usb_phy->otg, NULL);
usb_phy_shutdown(hcd->usb_phy);
usb_remove_hcd(hcd);
clk_disable_unprepare(tegra->clk);
usb_put_hcd(hcd);
return 0;
}
static void tegra_ehci_hcd_shutdown(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
if (hcd->driver->shutdown)
hcd->driver->shutdown(hcd);
}
static struct platform_driver tegra_ehci_driver = {
.probe = tegra_ehci_probe,
.remove = tegra_ehci_remove,
.shutdown = tegra_ehci_hcd_shutdown,
.driver = {
.name = DRV_NAME,
.of_match_table = tegra_ehci_of_match,
}
};
static int tegra_ehci_reset(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
int retval;
int txfifothresh;
retval = ehci_setup(hcd);
if (retval)
return retval;
/*
* We should really pull this value out of tegra_ehci_soc_config, but
* to avoid needing access to it, make use of the fact that Tegra20 is
* the only one so far that needs a value of 10, and Tegra20 is the
* only one which doesn't set has_hostpc.
*/
txfifothresh = ehci->has_hostpc ? 0x10 : 10;
ehci_writel(ehci, txfifothresh << 16, &ehci->regs->txfill_tuning);
return 0;
}
static const struct ehci_driver_overrides tegra_overrides __initconst = {
.extra_priv_size = sizeof(struct tegra_ehci_hcd),
.reset = tegra_ehci_reset,
};
static int __init ehci_tegra_init(void)
{
if (usb_disabled())
return -ENODEV;
pr_info(DRV_NAME ": " DRIVER_DESC "\n");
ehci_init_driver(&tegra_ehci_hc_driver, &tegra_overrides);
/*
* The Tegra HW has some unusual quirks, which require Tegra-specific
* workarounds. We override certain hc_driver functions here to
* achieve that. We explicitly do not enhance ehci_driver_overrides to
* allow this more easily, since this is an unusual case, and we don't
* want to encourage others to override these functions by making it
* too easy.
*/
tegra_ehci_hc_driver.map_urb_for_dma = tegra_ehci_map_urb_for_dma;
tegra_ehci_hc_driver.unmap_urb_for_dma = tegra_ehci_unmap_urb_for_dma;
tegra_ehci_hc_driver.hub_control = tegra_ehci_hub_control;
return platform_driver_register(&tegra_ehci_driver);
}
module_init(ehci_tegra_init);
static void __exit ehci_tegra_cleanup(void)
{
platform_driver_unregister(&tegra_ehci_driver);
}
module_exit(ehci_tegra_cleanup);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRV_NAME);
MODULE_DEVICE_TABLE(of, tegra_ehci_of_match);