linux/arch/x86/pci/acpi.c

406 lines
9.8 KiB
C
Raw Normal View History

#include <linux/pci.h>
#include <linux/acpi.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/dmi.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <asm/numa.h>
#include <asm/pci_x86.h>
struct pci_root_info {
struct acpi_device *bridge;
char *name;
unsigned int res_num;
struct resource *res;
struct pci_bus *bus;
int busnum;
};
static bool pci_use_crs = true;
static int __init set_use_crs(const struct dmi_system_id *id)
{
pci_use_crs = true;
return 0;
}
static const struct dmi_system_id pci_use_crs_table[] __initconst = {
/* http://bugzilla.kernel.org/show_bug.cgi?id=14183 */
{
.callback = set_use_crs,
.ident = "IBM System x3800",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
},
},
x86/PCI: use host bridge _CRS info on ASRock ALiveSATA2-GLAN This DMI quirk turns on "pci=use_crs" for the ALiveSATA2-GLAN because amd_bus.c doesn't handle this system correctly. The system has a single HyperTransport I/O chain, but has two PCI host bridges to buses 00 and 80. amd_bus.c learns the MMIO range associated with buses 00-ff and that this range is routed to the HT chain hosted at node 0, link 0: bus: [00, ff] on node 0 link 0 bus: 00 index 1 [mem 0x80000000-0xfcffffffff] This includes the address space for both bus 00 and bus 80, and amd_bus.c assumes it's all routed to bus 00. We find device 80:01.0, which BIOS left in the middle of that space, but we don't find a bridge from bus 00 to bus 80, so we conclude that 80:01.0 is unreachable from bus 00, and we move it from the original, working, address to something outside the bus 00 aperture, which does not work: pci 0000:80:01.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit] pci 0000:80:01.0: BAR 0: assigned [mem 0xfd00000000-0xfd00003fff 64bit] The BIOS told us everything we need to know to handle this correctly, so we're better off if we just pay attention, which lets us leave the 80:01.0 device at the original, working, address: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f]) pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xff37ffff] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff]) pci_root PNP0A08:00: host bridge window [mem 0xfebfc000-0xfebfffff] This was a regression between 2.6.33 and 2.6.34. In 2.6.33, amd_bus.c was used only when we found multiple HT chains. 3e3da00c01d050, which enabled amd_bus.c even on systems with a single HT chain, caused this failure. This quirk was written by Graham. If we ever enable "pci=use_crs" for machines from 2006 or earlir, this quirk should be removed. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16007 Cc: stable@kernel.org Reported-by: Graham Ramsey <ramsey.graham@ntlworld.com> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-23 18:53:27 +00:00
/* https://bugzilla.kernel.org/show_bug.cgi?id=16007 */
/* 2006 AMD HT/VIA system with two host bridges */
{
.callback = set_use_crs,
.ident = "ASRock ALiveSATA2-GLAN",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "ALiveSATA2-GLAN"),
},
},
{}
};
void __init pci_acpi_crs_quirks(void)
{
int year;
if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year < 2008)
pci_use_crs = false;
dmi_check_system(pci_use_crs_table);
/*
* If the user specifies "pci=use_crs" or "pci=nocrs" explicitly, that
* takes precedence over anything we figured out above.
*/
if (pci_probe & PCI_ROOT_NO_CRS)
pci_use_crs = false;
else if (pci_probe & PCI_USE__CRS)
pci_use_crs = true;
printk(KERN_INFO "PCI: %s host bridge windows from ACPI; "
"if necessary, use \"pci=%s\" and report a bug\n",
pci_use_crs ? "Using" : "Ignoring",
pci_use_crs ? "nocrs" : "use_crs");
}
static acpi_status
resource_to_addr(struct acpi_resource *resource,
struct acpi_resource_address64 *addr)
{
acpi_status status;
struct acpi_resource_memory24 *memory24;
struct acpi_resource_memory32 *memory32;
struct acpi_resource_fixed_memory32 *fixed_memory32;
memset(addr, 0, sizeof(*addr));
switch (resource->type) {
case ACPI_RESOURCE_TYPE_MEMORY24:
memory24 = &resource->data.memory24;
addr->resource_type = ACPI_MEMORY_RANGE;
addr->minimum = memory24->minimum;
addr->address_length = memory24->address_length;
addr->maximum = addr->minimum + addr->address_length - 1;
return AE_OK;
case ACPI_RESOURCE_TYPE_MEMORY32:
memory32 = &resource->data.memory32;
addr->resource_type = ACPI_MEMORY_RANGE;
addr->minimum = memory32->minimum;
addr->address_length = memory32->address_length;
addr->maximum = addr->minimum + addr->address_length - 1;
return AE_OK;
case ACPI_RESOURCE_TYPE_FIXED_MEMORY32:
fixed_memory32 = &resource->data.fixed_memory32;
addr->resource_type = ACPI_MEMORY_RANGE;
addr->minimum = fixed_memory32->address;
addr->address_length = fixed_memory32->address_length;
addr->maximum = addr->minimum + addr->address_length - 1;
return AE_OK;
case ACPI_RESOURCE_TYPE_ADDRESS16:
case ACPI_RESOURCE_TYPE_ADDRESS32:
case ACPI_RESOURCE_TYPE_ADDRESS64:
status = acpi_resource_to_address64(resource, addr);
if (ACPI_SUCCESS(status) &&
(addr->resource_type == ACPI_MEMORY_RANGE ||
addr->resource_type == ACPI_IO_RANGE) &&
addr->address_length > 0) {
return AE_OK;
}
break;
}
return AE_ERROR;
}
static acpi_status
count_resource(struct acpi_resource *acpi_res, void *data)
{
struct pci_root_info *info = data;
struct acpi_resource_address64 addr;
acpi_status status;
status = resource_to_addr(acpi_res, &addr);
if (ACPI_SUCCESS(status))
info->res_num++;
return AE_OK;
}
static acpi_status
setup_resource(struct acpi_resource *acpi_res, void *data)
{
struct pci_root_info *info = data;
struct resource *res;
struct acpi_resource_address64 addr;
acpi_status status;
unsigned long flags;
u64 start, end;
status = resource_to_addr(acpi_res, &addr);
if (!ACPI_SUCCESS(status))
return AE_OK;
if (addr.resource_type == ACPI_MEMORY_RANGE) {
flags = IORESOURCE_MEM;
if (addr.info.mem.caching == ACPI_PREFETCHABLE_MEMORY)
flags |= IORESOURCE_PREFETCH;
} else if (addr.resource_type == ACPI_IO_RANGE) {
flags = IORESOURCE_IO;
} else
return AE_OK;
start = addr.minimum + addr.translation_offset;
end = addr.maximum + addr.translation_offset;
res = &info->res[info->res_num];
res->name = info->name;
res->flags = flags;
res->start = start;
res->end = end;
res->child = NULL;
if (!pci_use_crs) {
dev_printk(KERN_DEBUG, &info->bridge->dev,
"host bridge window %pR (ignored)\n", res);
return AE_OK;
}
info->res_num++;
if (addr.translation_offset)
dev_info(&info->bridge->dev, "host bridge window %pR "
"(PCI address [%#llx-%#llx])\n",
res, res->start - addr.translation_offset,
res->end - addr.translation_offset);
else
dev_info(&info->bridge->dev, "host bridge window %pR\n", res);
return AE_OK;
}
static bool resource_contains(struct resource *res, resource_size_t point)
{
if (res->start <= point && point <= res->end)
return true;
return false;
}
static void coalesce_windows(struct pci_root_info *info, int type)
{
int i, j;
struct resource *res1, *res2;
for (i = 0; i < info->res_num; i++) {
res1 = &info->res[i];
if (!(res1->flags & type))
continue;
for (j = i + 1; j < info->res_num; j++) {
res2 = &info->res[j];
if (!(res2->flags & type))
continue;
/*
* I don't like throwing away windows because then
* our resources no longer match the ACPI _CRS, but
* the kernel resource tree doesn't allow overlaps.
*/
if (resource_contains(res1, res2->start) ||
resource_contains(res1, res2->end) ||
resource_contains(res2, res1->start) ||
resource_contains(res2, res1->end)) {
res1->start = min(res1->start, res2->start);
res1->end = max(res1->end, res2->end);
dev_info(&info->bridge->dev,
"host bridge window expanded to %pR; %pR ignored\n",
res1, res2);
res2->flags = 0;
}
}
}
}
static void add_resources(struct pci_root_info *info)
{
int i;
struct resource *res, *root, *conflict;
if (!pci_use_crs)
return;
coalesce_windows(info, IORESOURCE_MEM);
coalesce_windows(info, IORESOURCE_IO);
for (i = 0; i < info->res_num; i++) {
res = &info->res[i];
if (res->flags & IORESOURCE_MEM)
root = &iomem_resource;
else if (res->flags & IORESOURCE_IO)
root = &ioport_resource;
else
continue;
conflict = insert_resource_conflict(root, res);
if (conflict)
dev_err(&info->bridge->dev,
"address space collision: host bridge window %pR "
"conflicts with %s %pR\n",
res, conflict->name, conflict);
else
pci_bus_add_resource(info->bus, res, 0);
}
}
static void
get_current_resources(struct acpi_device *device, int busnum,
int domain, struct pci_bus *bus)
{
struct pci_root_info info;
size_t size;
if (pci_use_crs)
pci_bus_remove_resources(bus);
info.bridge = device;
info.bus = bus;
info.res_num = 0;
acpi_walk_resources(device->handle, METHOD_NAME__CRS, count_resource,
&info);
if (!info.res_num)
return;
size = sizeof(*info.res) * info.res_num;
info.res = kmalloc(size, GFP_KERNEL);
if (!info.res)
goto res_alloc_fail;
info.name = kasprintf(GFP_KERNEL, "PCI Bus %04x:%02x", domain, busnum);
if (!info.name)
goto name_alloc_fail;
info.res_num = 0;
acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource,
&info);
add_resources(&info);
return;
name_alloc_fail:
kfree(info.res);
res_alloc_fail:
return;
}
struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_pci_root *root)
{
struct acpi_device *device = root->device;
int domain = root->segment;
int busnum = root->secondary.start;
struct pci_bus *bus;
struct pci_sysdata *sd;
int node;
#ifdef CONFIG_ACPI_NUMA
int pxm;
#endif
if (domain && !pci_domains_supported) {
printk(KERN_WARNING "pci_bus %04x:%02x: "
"ignored (multiple domains not supported)\n",
domain, busnum);
return NULL;
}
node = -1;
#ifdef CONFIG_ACPI_NUMA
pxm = acpi_get_pxm(device->handle);
if (pxm >= 0)
node = pxm_to_node(pxm);
if (node != -1)
set_mp_bus_to_node(busnum, node);
else
#endif
node = get_mp_bus_to_node(busnum);
if (node != -1 && !node_online(node))
node = -1;
/* Allocate per-root-bus (not per bus) arch-specific data.
* TODO: leak; this memory is never freed.
* It's arguable whether it's worth the trouble to care.
*/
sd = kzalloc(sizeof(*sd), GFP_KERNEL);
if (!sd) {
printk(KERN_WARNING "pci_bus %04x:%02x: "
"ignored (out of memory)\n", domain, busnum);
return NULL;
}
sd->domain = domain;
sd->node = node;
/*
* Maybe the desired pci bus has been already scanned. In such case
* it is unnecessary to scan the pci bus with the given domain,busnum.
*/
bus = pci_find_bus(domain, busnum);
if (bus) {
/*
* If the desired bus exits, the content of bus->sysdata will
* be replaced by sd.
*/
memcpy(bus->sysdata, sd, sizeof(*sd));
kfree(sd);
} else {
bus = pci_create_bus(NULL, busnum, &pci_root_ops, sd);
if (bus) {
get_current_resources(device, busnum, domain, bus);
bus->subordinate = pci_scan_child_bus(bus);
}
}
if (!bus)
kfree(sd);
if (bus && node != -1) {
#ifdef CONFIG_ACPI_NUMA
if (pxm >= 0)
dev_printk(KERN_DEBUG, &bus->dev,
"on NUMA node %d (pxm %d)\n", node, pxm);
#else
dev_printk(KERN_DEBUG, &bus->dev, "on NUMA node %d\n", node);
#endif
}
return bus;
}
int __init pci_acpi_init(void)
{
struct pci_dev *dev = NULL;
if (acpi_noirq)
return -ENODEV;
printk(KERN_INFO "PCI: Using ACPI for IRQ routing\n");
acpi_irq_penalty_init();
pcibios_enable_irq = acpi_pci_irq_enable;
pcibios_disable_irq = acpi_pci_irq_disable;
x86_init.pci.init_irq = x86_init_noop;
if (pci_routeirq) {
/*
* PCI IRQ routing is set up by pci_enable_device(), but we
* also do it here in case there are still broken drivers that
* don't use pci_enable_device().
*/
printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
for_each_pci_dev(dev)
acpi_pci_irq_enable(dev);
}
return 0;
}