License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
|
|
|
# SPDX-License-Identifier: GPL-2.0
|
2023-02-24 08:59:40 +00:00
|
|
|
|
|
|
|
|
ifdef CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX
|
|
|
|
|
# Safe for compiler to generate meminstrinsic calls in uninstrumented files.
|
|
|
|
|
CFLAGS_KASAN_NOSANITIZE :=
|
|
|
|
|
else
|
|
|
|
|
# Don't let compiler generate memintrinsic calls in uninstrumented files
|
|
|
|
|
# because they are instrumented.
|
2019-08-14 14:31:57 +00:00
|
|
|
CFLAGS_KASAN_NOSANITIZE := -fno-builtin
|
2023-02-24 08:59:40 +00:00
|
|
|
endif
|
|
|
|
|
|
2019-08-14 14:31:57 +00:00
|
|
|
KASAN_SHADOW_OFFSET ?= $(CONFIG_KASAN_SHADOW_OFFSET)
|
|
|
|
|
|
2021-04-16 22:45:57 +00:00
|
|
|
cc-param = $(call cc-option, -mllvm -$(1), $(call cc-option, --param $(1)))
|
2024-08-20 19:48:58 +00:00
|
|
|
rustc-param = $(call rustc-option, -Cllvm-args=-$(1),)
|
|
|
|
|
|
|
|
|
|
check-args = $(foreach arg,$(2),$(call $(1),$(arg)))
|
|
|
|
|
|
|
|
|
|
kasan_params :=
|
2021-04-16 22:45:57 +00:00
|
|
|
|
2021-04-16 22:46:00 +00:00
|
|
|
ifdef CONFIG_KASAN_STACK
|
|
|
|
|
stack_enable := 1
|
|
|
|
|
else
|
|
|
|
|
stack_enable := 0
|
|
|
|
|
endif
|
|
|
|
|
|
2018-12-28 08:29:53 +00:00
|
|
|
ifdef CONFIG_KASAN_GENERIC
|
|
|
|
|
|
kasan: add kernel address sanitizer infrastructure
Kernel Address sanitizer (KASan) is a dynamic memory error detector. It
provides fast and comprehensive solution for finding use-after-free and
out-of-bounds bugs.
KASAN uses compile-time instrumentation for checking every memory access,
therefore GCC > v4.9.2 required. v4.9.2 almost works, but has issues with
putting symbol aliases into the wrong section, which breaks kasan
instrumentation of globals.
This patch only adds infrastructure for kernel address sanitizer. It's
not available for use yet. The idea and some code was borrowed from [1].
Basic idea:
The main idea of KASAN is to use shadow memory to record whether each byte
of memory is safe to access or not, and use compiler's instrumentation to
check the shadow memory on each memory access.
Address sanitizer uses 1/8 of the memory addressable in kernel for shadow
memory and uses direct mapping with a scale and offset to translate a
memory address to its corresponding shadow address.
Here is function to translate address to corresponding shadow address:
unsigned long kasan_mem_to_shadow(unsigned long addr)
{
return (addr >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET;
}
where KASAN_SHADOW_SCALE_SHIFT = 3.
So for every 8 bytes there is one corresponding byte of shadow memory.
The following encoding used for each shadow byte: 0 means that all 8 bytes
of the corresponding memory region are valid for access; k (1 <= k <= 7)
means that the first k bytes are valid for access, and other (8 - k) bytes
are not; Any negative value indicates that the entire 8-bytes are
inaccessible. Different negative values used to distinguish between
different kinds of inaccessible memory (redzones, freed memory) (see
mm/kasan/kasan.h).
To be able to detect accesses to bad memory we need a special compiler.
Such compiler inserts a specific function calls (__asan_load*(addr),
__asan_store*(addr)) before each memory access of size 1, 2, 4, 8 or 16.
These functions check whether memory region is valid to access or not by
checking corresponding shadow memory. If access is not valid an error
printed.
Historical background of the address sanitizer from Dmitry Vyukov:
"We've developed the set of tools, AddressSanitizer (Asan),
ThreadSanitizer and MemorySanitizer, for user space. We actively use
them for testing inside of Google (continuous testing, fuzzing,
running prod services). To date the tools have found more than 10'000
scary bugs in Chromium, Google internal codebase and various
open-source projects (Firefox, OpenSSL, gcc, clang, ffmpeg, MySQL and
lots of others): [2] [3] [4].
The tools are part of both gcc and clang compilers.
We have not yet done massive testing under the Kernel AddressSanitizer
(it's kind of chicken and egg problem, you need it to be upstream to
start applying it extensively). To date it has found about 50 bugs.
Bugs that we've found in upstream kernel are listed in [5].
We've also found ~20 bugs in out internal version of the kernel. Also
people from Samsung and Oracle have found some.
[...]
As others noted, the main feature of AddressSanitizer is its
performance due to inline compiler instrumentation and simple linear
shadow memory. User-space Asan has ~2x slowdown on computational
programs and ~2x memory consumption increase. Taking into account that
kernel usually consumes only small fraction of CPU and memory when
running real user-space programs, I would expect that kernel Asan will
have ~10-30% slowdown and similar memory consumption increase (when we
finish all tuning).
I agree that Asan can well replace kmemcheck. We have plans to start
working on Kernel MemorySanitizer that finds uses of unitialized
memory. Asan+Msan will provide feature-parity with kmemcheck. As
others noted, Asan will unlikely replace debug slab and pagealloc that
can be enabled at runtime. Asan uses compiler instrumentation, so even
if it is disabled, it still incurs visible overheads.
Asan technology is easily portable to other architectures. Compiler
instrumentation is fully portable. Runtime has some arch-dependent
parts like shadow mapping and atomic operation interception. They are
relatively easy to port."
Comparison with other debugging features:
========================================
KMEMCHECK:
- KASan can do almost everything that kmemcheck can. KASan uses
compile-time instrumentation, which makes it significantly faster than
kmemcheck. The only advantage of kmemcheck over KASan is detection of
uninitialized memory reads.
Some brief performance testing showed that kasan could be
x500-x600 times faster than kmemcheck:
$ netperf -l 30
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to localhost (127.0.0.1) port 0 AF_INET
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
no debug: 87380 16384 16384 30.00 41624.72
kasan inline: 87380 16384 16384 30.00 12870.54
kasan outline: 87380 16384 16384 30.00 10586.39
kmemcheck: 87380 16384 16384 30.03 20.23
- Also kmemcheck couldn't work on several CPUs. It always sets
number of CPUs to 1. KASan doesn't have such limitation.
DEBUG_PAGEALLOC:
- KASan is slower than DEBUG_PAGEALLOC, but KASan works on sub-page
granularity level, so it able to find more bugs.
SLUB_DEBUG (poisoning, redzones):
- SLUB_DEBUG has lower overhead than KASan.
- SLUB_DEBUG in most cases are not able to detect bad reads,
KASan able to detect both reads and writes.
- In some cases (e.g. redzone overwritten) SLUB_DEBUG detect
bugs only on allocation/freeing of object. KASan catch
bugs right before it will happen, so we always know exact
place of first bad read/write.
[1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel
[2] https://code.google.com/p/address-sanitizer/wiki/FoundBugs
[3] https://code.google.com/p/thread-sanitizer/wiki/FoundBugs
[4] https://code.google.com/p/memory-sanitizer/wiki/FoundBugs
[5] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel#Trophies
Based on work by Andrey Konovalov.
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Acked-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 22:39:17 +00:00
|
|
|
ifdef CONFIG_KASAN_INLINE
|
2024-08-14 16:10:52 +00:00
|
|
|
# When the number of memory accesses in a function is less than this
|
|
|
|
|
# call threshold number, the compiler will use inline instrumentation.
|
|
|
|
|
# 10000 is chosen offhand as a sufficiently large number to make all
|
|
|
|
|
# kernel functions to be instrumented inline.
|
kasan: add kernel address sanitizer infrastructure
Kernel Address sanitizer (KASan) is a dynamic memory error detector. It
provides fast and comprehensive solution for finding use-after-free and
out-of-bounds bugs.
KASAN uses compile-time instrumentation for checking every memory access,
therefore GCC > v4.9.2 required. v4.9.2 almost works, but has issues with
putting symbol aliases into the wrong section, which breaks kasan
instrumentation of globals.
This patch only adds infrastructure for kernel address sanitizer. It's
not available for use yet. The idea and some code was borrowed from [1].
Basic idea:
The main idea of KASAN is to use shadow memory to record whether each byte
of memory is safe to access or not, and use compiler's instrumentation to
check the shadow memory on each memory access.
Address sanitizer uses 1/8 of the memory addressable in kernel for shadow
memory and uses direct mapping with a scale and offset to translate a
memory address to its corresponding shadow address.
Here is function to translate address to corresponding shadow address:
unsigned long kasan_mem_to_shadow(unsigned long addr)
{
return (addr >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET;
}
where KASAN_SHADOW_SCALE_SHIFT = 3.
So for every 8 bytes there is one corresponding byte of shadow memory.
The following encoding used for each shadow byte: 0 means that all 8 bytes
of the corresponding memory region are valid for access; k (1 <= k <= 7)
means that the first k bytes are valid for access, and other (8 - k) bytes
are not; Any negative value indicates that the entire 8-bytes are
inaccessible. Different negative values used to distinguish between
different kinds of inaccessible memory (redzones, freed memory) (see
mm/kasan/kasan.h).
To be able to detect accesses to bad memory we need a special compiler.
Such compiler inserts a specific function calls (__asan_load*(addr),
__asan_store*(addr)) before each memory access of size 1, 2, 4, 8 or 16.
These functions check whether memory region is valid to access or not by
checking corresponding shadow memory. If access is not valid an error
printed.
Historical background of the address sanitizer from Dmitry Vyukov:
"We've developed the set of tools, AddressSanitizer (Asan),
ThreadSanitizer and MemorySanitizer, for user space. We actively use
them for testing inside of Google (continuous testing, fuzzing,
running prod services). To date the tools have found more than 10'000
scary bugs in Chromium, Google internal codebase and various
open-source projects (Firefox, OpenSSL, gcc, clang, ffmpeg, MySQL and
lots of others): [2] [3] [4].
The tools are part of both gcc and clang compilers.
We have not yet done massive testing under the Kernel AddressSanitizer
(it's kind of chicken and egg problem, you need it to be upstream to
start applying it extensively). To date it has found about 50 bugs.
Bugs that we've found in upstream kernel are listed in [5].
We've also found ~20 bugs in out internal version of the kernel. Also
people from Samsung and Oracle have found some.
[...]
As others noted, the main feature of AddressSanitizer is its
performance due to inline compiler instrumentation and simple linear
shadow memory. User-space Asan has ~2x slowdown on computational
programs and ~2x memory consumption increase. Taking into account that
kernel usually consumes only small fraction of CPU and memory when
running real user-space programs, I would expect that kernel Asan will
have ~10-30% slowdown and similar memory consumption increase (when we
finish all tuning).
I agree that Asan can well replace kmemcheck. We have plans to start
working on Kernel MemorySanitizer that finds uses of unitialized
memory. Asan+Msan will provide feature-parity with kmemcheck. As
others noted, Asan will unlikely replace debug slab and pagealloc that
can be enabled at runtime. Asan uses compiler instrumentation, so even
if it is disabled, it still incurs visible overheads.
Asan technology is easily portable to other architectures. Compiler
instrumentation is fully portable. Runtime has some arch-dependent
parts like shadow mapping and atomic operation interception. They are
relatively easy to port."
Comparison with other debugging features:
========================================
KMEMCHECK:
- KASan can do almost everything that kmemcheck can. KASan uses
compile-time instrumentation, which makes it significantly faster than
kmemcheck. The only advantage of kmemcheck over KASan is detection of
uninitialized memory reads.
Some brief performance testing showed that kasan could be
x500-x600 times faster than kmemcheck:
$ netperf -l 30
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to localhost (127.0.0.1) port 0 AF_INET
Recv Send Send
Socket Socket Message Elapsed
Size Size Size Time Throughput
bytes bytes bytes secs. 10^6bits/sec
no debug: 87380 16384 16384 30.00 41624.72
kasan inline: 87380 16384 16384 30.00 12870.54
kasan outline: 87380 16384 16384 30.00 10586.39
kmemcheck: 87380 16384 16384 30.03 20.23
- Also kmemcheck couldn't work on several CPUs. It always sets
number of CPUs to 1. KASan doesn't have such limitation.
DEBUG_PAGEALLOC:
- KASan is slower than DEBUG_PAGEALLOC, but KASan works on sub-page
granularity level, so it able to find more bugs.
SLUB_DEBUG (poisoning, redzones):
- SLUB_DEBUG has lower overhead than KASan.
- SLUB_DEBUG in most cases are not able to detect bad reads,
KASan able to detect both reads and writes.
- In some cases (e.g. redzone overwritten) SLUB_DEBUG detect
bugs only on allocation/freeing of object. KASan catch
bugs right before it will happen, so we always know exact
place of first bad read/write.
[1] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel
[2] https://code.google.com/p/address-sanitizer/wiki/FoundBugs
[3] https://code.google.com/p/thread-sanitizer/wiki/FoundBugs
[4] https://code.google.com/p/memory-sanitizer/wiki/FoundBugs
[5] https://code.google.com/p/address-sanitizer/wiki/AddressSanitizerForKernel#Trophies
Based on work by Andrey Konovalov.
Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com>
Acked-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrey Konovalov <adech.fo@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Konstantin Serebryany <kcc@google.com>
Cc: Dmitry Chernenkov <dmitryc@google.com>
Cc: Yuri Gribov <tetra2005@gmail.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13 22:39:17 +00:00
|
|
|
call_threshold := 10000
|
|
|
|
|
else
|
|
|
|
|
call_threshold := 0
|
|
|
|
|
endif
|
|
|
|
|
|
2024-08-14 16:10:52 +00:00
|
|
|
# First, enable -fsanitize=kernel-address together with providing the shadow
|
|
|
|
|
# mapping offset, as for GCC, -fasan-shadow-offset fails without -fsanitize
|
|
|
|
|
# (GCC accepts the shadow mapping offset via -fasan-shadow-offset instead of
|
|
|
|
|
# a --param like the other KASAN parameters).
|
|
|
|
|
# Instead of ifdef-checking the compiler, rely on cc-option.
|
|
|
|
|
CFLAGS_KASAN := $(call cc-option, -fsanitize=kernel-address \
|
|
|
|
|
-fasan-shadow-offset=$(KASAN_SHADOW_OFFSET), \
|
|
|
|
|
$(call cc-option, -fsanitize=kernel-address \
|
|
|
|
|
-mllvm -asan-mapping-offset=$(KASAN_SHADOW_OFFSET)))
|
|
|
|
|
|
2024-08-20 19:48:58 +00:00
|
|
|
# The minimum supported `rustc` version has a minimum supported LLVM
|
|
|
|
|
# version late enough that we can assume support for -asan-mapping-offset.
|
|
|
|
|
RUSTFLAGS_KASAN := -Zsanitizer=kernel-address \
|
|
|
|
|
-Zsanitizer-recover=kernel-address \
|
|
|
|
|
-Cllvm-args=-asan-mapping-offset=$(KASAN_SHADOW_OFFSET)
|
|
|
|
|
|
|
|
|
|
# Now, add other parameters enabled similarly in GCC, Clang, and rustc.
|
|
|
|
|
# As some of them are not supported by older compilers, these will be filtered
|
|
|
|
|
# through `cc-param` or `rust-param` as applicable.
|
|
|
|
|
kasan_params += asan-instrumentation-with-call-threshold=$(call_threshold) \
|
|
|
|
|
asan-stack=$(stack_enable) \
|
|
|
|
|
asan-instrument-allocas=1 \
|
|
|
|
|
asan-globals=1
|
2021-09-24 22:44:00 +00:00
|
|
|
|
2023-02-24 08:59:39 +00:00
|
|
|
# Instrument memcpy/memset/memmove calls by using instrumented __asan_mem*()
|
|
|
|
|
# instead. With compilers that don't support this option, compiler-inserted
|
|
|
|
|
# memintrinsics won't be checked by KASAN on GENERIC_ENTRY architectures.
|
2024-08-20 19:48:58 +00:00
|
|
|
kasan_params += asan-kernel-mem-intrinsic-prefix=1
|
2023-02-24 08:59:39 +00:00
|
|
|
|
2018-12-28 08:29:53 +00:00
|
|
|
endif # CONFIG_KASAN_GENERIC
|
2018-02-06 23:36:00 +00:00
|
|
|
|
2018-12-28 08:29:53 +00:00
|
|
|
ifdef CONFIG_KASAN_SW_TAGS
|
|
|
|
|
|
2024-08-20 19:48:58 +00:00
|
|
|
CFLAGS_KASAN := -fsanitize=kernel-hwaddress
|
|
|
|
|
|
|
|
|
|
# This sets flags that will enable SW_TAGS KASAN once enabled in Rust. These
|
|
|
|
|
# will not work today, and is guarded against in dependencies for CONFIG_RUST.
|
|
|
|
|
RUSTFLAGS_KASAN := -Zsanitizer=kernel-hwaddress \
|
|
|
|
|
-Zsanitizer-recover=kernel-hwaddress
|
|
|
|
|
|
2018-12-28 08:29:53 +00:00
|
|
|
ifdef CONFIG_KASAN_INLINE
|
2024-08-20 19:48:58 +00:00
|
|
|
kasan_params += hwasan-mapping-offset=$(KASAN_SHADOW_OFFSET)
|
2018-12-28 08:29:53 +00:00
|
|
|
else
|
2024-08-20 19:48:58 +00:00
|
|
|
kasan_params += hwasan-instrument-with-calls=1
|
2018-12-28 08:29:53 +00:00
|
|
|
endif
|
|
|
|
|
|
2024-08-20 19:48:58 +00:00
|
|
|
kasan_params += hwasan-instrument-stack=$(stack_enable) \
|
|
|
|
|
hwasan-use-short-granules=0 \
|
|
|
|
|
hwasan-inline-all-checks=0
|
2018-12-28 08:29:53 +00:00
|
|
|
|
2023-02-24 08:59:39 +00:00
|
|
|
# Instrument memcpy/memset/memmove calls by using instrumented __hwasan_mem*().
|
2023-04-18 12:23:35 +00:00
|
|
|
ifeq ($(call clang-min-version, 150000)$(call gcc-min-version, 130000),y)
|
2024-08-20 19:48:58 +00:00
|
|
|
kasan_params += hwasan-kernel-mem-intrinsic-prefix=1
|
2023-04-18 12:23:35 +00:00
|
|
|
endif
|
2023-02-24 08:59:39 +00:00
|
|
|
|
2018-12-28 08:29:53 +00:00
|
|
|
endif # CONFIG_KASAN_SW_TAGS
|
kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
Move CFLAGS_KASAN*, CFLAGS_UBSAN, CFLAGS_KCSAN to Makefile.kasan,
Makefile.ubsan, Makefile.kcsan, respectively.
This commit also avoids the same -fsanitize=* flags being added to
CFLAGS_UBSAN multiple times.
Prior to this commit, the ubsan flags were appended by the '+='
operator, without any initialization. Some build targets such as
'make bindeb-pkg' recurses to the top Makefile, and ended up with
adding the same flags to CFLAGS_UBSAN twice.
Clear CFLAGS_UBSAN with ':=' to make it a simply expanded variable.
This is better than a recursively expanded variable, which evaluates
$(call cc-option, ...) multiple times before Kbuild starts descending
to subdirectories.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Marco Elver <elver@google.com>
2020-09-10 13:44:29 +00:00
|
|
|
|
2024-08-20 19:48:58 +00:00
|
|
|
# Add all as-supported KASAN LLVM parameters requested by the configuration.
|
|
|
|
|
CFLAGS_KASAN += $(call check-args, cc-param, $(kasan_params))
|
|
|
|
|
|
|
|
|
|
ifdef CONFIG_RUST
|
|
|
|
|
# Avoid calling `rustc-param` unless Rust is enabled.
|
|
|
|
|
RUSTFLAGS_KASAN += $(call check-args, rustc-param, $(kasan_params))
|
|
|
|
|
endif # CONFIG_RUST
|
|
|
|
|
|
|
|
|
|
export CFLAGS_KASAN CFLAGS_KASAN_NOSANITIZE RUSTFLAGS_KASAN
|
