2019-06-28 21:23:13 +00:00
|
|
|
======================
|
2009-03-31 22:23:53 +00:00
|
|
|
Kernel driver isl29003
|
2019-06-28 21:23:13 +00:00
|
|
|
======================
|
2009-03-31 22:23:53 +00:00
|
|
|
|
|
|
|
|
Supported chips:
|
2019-06-28 21:23:13 +00:00
|
|
|
|
2009-03-31 22:23:53 +00:00
|
|
|
* Intersil ISL29003
|
2019-06-28 21:23:13 +00:00
|
|
|
|
2009-03-31 22:23:53 +00:00
|
|
|
Prefix: 'isl29003'
|
2019-06-28 21:23:13 +00:00
|
|
|
|
2009-03-31 22:23:53 +00:00
|
|
|
Addresses scanned: none
|
2019-06-28 21:23:13 +00:00
|
|
|
|
2009-03-31 22:23:53 +00:00
|
|
|
Datasheet:
|
|
|
|
|
http://www.intersil.com/data/fn/fn7464.pdf
|
|
|
|
|
|
|
|
|
|
Author: Daniel Mack <daniel@caiaq.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Description
|
|
|
|
|
-----------
|
|
|
|
|
The ISL29003 is an integrated light sensor with a 16-bit integrating type
|
|
|
|
|
ADC, I2C user programmable lux range select for optimized counts/lux, and
|
|
|
|
|
I2C multi-function control and monitoring capabilities. The internal ADC
|
|
|
|
|
provides 16-bit resolution while rejecting 50Hz and 60Hz flicker caused by
|
|
|
|
|
artificial light sources.
|
|
|
|
|
|
|
|
|
|
The driver allows to set the lux range, the bit resolution, the operational
|
|
|
|
|
mode (see below) and the power state of device and can read the current lux
|
|
|
|
|
value, of course.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Detection
|
|
|
|
|
---------
|
|
|
|
|
|
|
|
|
|
The ISL29003 does not have an ID register which could be used to identify
|
|
|
|
|
it, so the detection routine will just try to read from the configured I2C
|
2015-09-16 15:54:58 +00:00
|
|
|
address and consider the device to be present as soon as it ACKs the
|
2009-03-31 22:23:53 +00:00
|
|
|
transfer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sysfs entries
|
|
|
|
|
-------------
|
|
|
|
|
|
|
|
|
|
range:
|
2019-06-28 21:23:13 +00:00
|
|
|
== ===========================
|
2009-03-31 22:23:53 +00:00
|
|
|
0: 0 lux to 1000 lux (default)
|
|
|
|
|
1: 0 lux to 4000 lux
|
|
|
|
|
2: 0 lux to 16,000 lux
|
|
|
|
|
3: 0 lux to 64,000 lux
|
2019-06-28 21:23:13 +00:00
|
|
|
== ===========================
|
2009-03-31 22:23:53 +00:00
|
|
|
|
|
|
|
|
resolution:
|
2019-06-28 21:23:13 +00:00
|
|
|
== =====================
|
2009-03-31 22:23:53 +00:00
|
|
|
0: 2^16 cycles (default)
|
|
|
|
|
1: 2^12 cycles
|
|
|
|
|
2: 2^8 cycles
|
|
|
|
|
3: 2^4 cycles
|
2019-06-28 21:23:13 +00:00
|
|
|
== =====================
|
2009-03-31 22:23:53 +00:00
|
|
|
|
|
|
|
|
mode:
|
2019-06-28 21:23:13 +00:00
|
|
|
== =================================================
|
2009-03-31 22:23:53 +00:00
|
|
|
0: diode1's current (unsigned 16bit) (default)
|
|
|
|
|
1: diode1's current (unsigned 16bit)
|
|
|
|
|
2: difference between diodes (l1 - l2, signed 15bit)
|
2019-06-28 21:23:13 +00:00
|
|
|
== =================================================
|
2009-03-31 22:23:53 +00:00
|
|
|
|
|
|
|
|
power_state:
|
2019-06-28 21:23:13 +00:00
|
|
|
== =================================================
|
2009-03-31 22:23:53 +00:00
|
|
|
0: device is disabled (default)
|
|
|
|
|
1: device is enabled
|
2019-06-28 21:23:13 +00:00
|
|
|
== =================================================
|
2009-03-31 22:23:53 +00:00
|
|
|
|
|
|
|
|
lux (read only):
|
|
|
|
|
returns the value from the last sensor reading
|
|
|
|
|
|
