linux/arch/um/kernel/irq.c

518 lines
12 KiB
C
Raw Normal View History

/*
* Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
* Derived (i.e. mostly copied) from arch/i386/kernel/irq.c:
* Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar
*/
#include "linux/cpumask.h"
#include "linux/hardirq.h"
#include "linux/interrupt.h"
#include "linux/kernel_stat.h"
#include "linux/module.h"
#include "linux/sched.h"
#include "linux/seq_file.h"
#include "as-layout.h"
#include "kern_util.h"
#include "os.h"
/*
* Generic, controller-independent functions:
*/
int show_interrupts(struct seq_file *p, void *v)
{
int i = *(loff_t *) v, j;
struct irqaction * action;
unsigned long flags;
if (i == 0) {
seq_printf(p, " ");
for_each_online_cpu(j)
seq_printf(p, "CPU%d ",j);
seq_putc(p, '\n');
}
if (i < NR_IRQS) {
raw_spin_lock_irqsave(&irq_desc[i].lock, flags);
action = irq_desc[i].action;
if (!action)
goto skip;
seq_printf(p, "%3d: ",i);
#ifndef CONFIG_SMP
seq_printf(p, "%10u ", kstat_irqs(i));
#else
for_each_online_cpu(j)
seq_printf(p, "%10u ", kstat_irqs_cpu(i, j));
#endif
[PATCH] genirq: rename desc->handler to desc->chip This patch-queue improves the generic IRQ layer to be truly generic, by adding various abstractions and features to it, without impacting existing functionality. While the queue can be best described as "fix and improve everything in the generic IRQ layer that we could think of", and thus it consists of many smaller features and lots of cleanups, the one feature that stands out most is the new 'irq chip' abstraction. The irq-chip abstraction is about describing and coding and IRQ controller driver by mapping its raw hardware capabilities [and quirks, if needed] in a straightforward way, without having to think about "IRQ flow" (level/edge/etc.) type of details. This stands in contrast with the current 'irq-type' model of genirq architectures, which 'mixes' raw hardware capabilities with 'flow' details. The patchset supports both types of irq controller designs at once, and converts i386 and x86_64 to the new irq-chip design. As a bonus side-effect of the irq-chip approach, chained interrupt controllers (master/slave PIC constructs, etc.) are now supported by design as well. The end result of this patchset intends to be simpler architecture-level code and more consolidation between architectures. We reused many bits of code and many concepts from Russell King's ARM IRQ layer, the merging of which was one of the motivations for this patchset. This patch: rename desc->handler to desc->chip. Originally i did not want to do this, because it's a big patch. But having both "desc->handler", "desc->handle_irq" and "action->handler" caused a large degree of confusion and made the code appear alot less clean than it truly is. I have also attempted a dual approach as well by introducing a desc->chip alias - but that just wasnt robust enough and broke frequently. So lets get over with this quickly. The conversion was done automatically via scripts and converts all the code in the kernel. This renaming patch is the first one amongst the patches, so that the remaining patches can stay flexible and can be merged and split up without having some big monolithic patch act as a merge barrier. [akpm@osdl.org: build fix] [akpm@osdl.org: another build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 09:24:36 +00:00
seq_printf(p, " %14s", irq_desc[i].chip->typename);
seq_printf(p, " %s", action->name);
for (action=action->next; action; action = action->next)
seq_printf(p, ", %s", action->name);
seq_putc(p, '\n');
skip:
raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags);
} else if (i == NR_IRQS)
seq_putc(p, '\n');
return 0;
}
/*
* This list is accessed under irq_lock, except in sigio_handler,
* where it is safe from being modified. IRQ handlers won't change it -
* if an IRQ source has vanished, it will be freed by free_irqs just
* before returning from sigio_handler. That will process a separate
* list of irqs to free, with its own locking, coming back here to
* remove list elements, taking the irq_lock to do so.
*/
static struct irq_fd *active_fds = NULL;
static struct irq_fd **last_irq_ptr = &active_fds;
extern void free_irqs(void);
void sigio_handler(int sig, struct uml_pt_regs *regs)
{
struct irq_fd *irq_fd;
int n;
if (smp_sigio_handler())
return;
while (1) {
n = os_waiting_for_events(active_fds);
if (n <= 0) {
if (n == -EINTR)
continue;
else break;
}
for (irq_fd = active_fds; irq_fd != NULL;
irq_fd = irq_fd->next) {
if (irq_fd->current_events != 0) {
irq_fd->current_events = 0;
do_IRQ(irq_fd->irq, regs);
}
}
}
free_irqs();
}
static DEFINE_SPINLOCK(irq_lock);
static int activate_fd(int irq, int fd, int type, void *dev_id)
{
struct pollfd *tmp_pfd;
struct irq_fd *new_fd, *irq_fd;
unsigned long flags;
int events, err, n;
err = os_set_fd_async(fd);
if (err < 0)
goto out;
err = -ENOMEM;
new_fd = kmalloc(sizeof(struct irq_fd), GFP_KERNEL);
if (new_fd == NULL)
goto out;
if (type == IRQ_READ)
events = UM_POLLIN | UM_POLLPRI;
else events = UM_POLLOUT;
*new_fd = ((struct irq_fd) { .next = NULL,
.id = dev_id,
.fd = fd,
.type = type,
.irq = irq,
.events = events,
.current_events = 0 } );
err = -EBUSY;
spin_lock_irqsave(&irq_lock, flags);
for (irq_fd = active_fds; irq_fd != NULL; irq_fd = irq_fd->next) {
if ((irq_fd->fd == fd) && (irq_fd->type == type)) {
printk(KERN_ERR "Registering fd %d twice\n", fd);
printk(KERN_ERR "Irqs : %d, %d\n", irq_fd->irq, irq);
printk(KERN_ERR "Ids : 0x%p, 0x%p\n", irq_fd->id,
dev_id);
goto out_unlock;
}
}
if (type == IRQ_WRITE)
fd = -1;
tmp_pfd = NULL;
n = 0;
while (1) {
n = os_create_pollfd(fd, events, tmp_pfd, n);
if (n == 0)
break;
/*
* n > 0
* It means we couldn't put new pollfd to current pollfds
* and tmp_fds is NULL or too small for new pollfds array.
* Needed size is equal to n as minimum.
*
* Here we have to drop the lock in order to call
* kmalloc, which might sleep.
* If something else came in and changed the pollfds array
* so we will not be able to put new pollfd struct to pollfds
* then we free the buffer tmp_fds and try again.
*/
spin_unlock_irqrestore(&irq_lock, flags);
kfree(tmp_pfd);
tmp_pfd = kmalloc(n, GFP_KERNEL);
if (tmp_pfd == NULL)
goto out_kfree;
spin_lock_irqsave(&irq_lock, flags);
}
*last_irq_ptr = new_fd;
last_irq_ptr = &new_fd->next;
spin_unlock_irqrestore(&irq_lock, flags);
/*
* This calls activate_fd, so it has to be outside the critical
* section.
*/
maybe_sigio_broken(fd, (type == IRQ_READ));
return 0;
out_unlock:
spin_unlock_irqrestore(&irq_lock, flags);
out_kfree:
kfree(new_fd);
out:
return err;
}
static void free_irq_by_cb(int (*test)(struct irq_fd *, void *), void *arg)
{
unsigned long flags;
spin_lock_irqsave(&irq_lock, flags);
os_free_irq_by_cb(test, arg, active_fds, &last_irq_ptr);
spin_unlock_irqrestore(&irq_lock, flags);
}
struct irq_and_dev {
int irq;
void *dev;
};
static int same_irq_and_dev(struct irq_fd *irq, void *d)
{
struct irq_and_dev *data = d;
return ((irq->irq == data->irq) && (irq->id == data->dev));
}
static void free_irq_by_irq_and_dev(unsigned int irq, void *dev)
{
struct irq_and_dev data = ((struct irq_and_dev) { .irq = irq,
.dev = dev });
free_irq_by_cb(same_irq_and_dev, &data);
}
static int same_fd(struct irq_fd *irq, void *fd)
{
return (irq->fd == *((int *)fd));
}
void free_irq_by_fd(int fd)
{
free_irq_by_cb(same_fd, &fd);
}
/* Must be called with irq_lock held */
static struct irq_fd *find_irq_by_fd(int fd, int irqnum, int *index_out)
{
struct irq_fd *irq;
int i = 0;
int fdi;
for (irq = active_fds; irq != NULL; irq = irq->next) {
if ((irq->fd == fd) && (irq->irq == irqnum))
break;
i++;
}
if (irq == NULL) {
printk(KERN_ERR "find_irq_by_fd doesn't have descriptor %d\n",
fd);
goto out;
}
fdi = os_get_pollfd(i);
if ((fdi != -1) && (fdi != fd)) {
printk(KERN_ERR "find_irq_by_fd - mismatch between active_fds "
"and pollfds, fd %d vs %d, need %d\n", irq->fd,
fdi, fd);
irq = NULL;
goto out;
}
*index_out = i;
out:
return irq;
}
void reactivate_fd(int fd, int irqnum)
{
struct irq_fd *irq;
unsigned long flags;
int i;
spin_lock_irqsave(&irq_lock, flags);
irq = find_irq_by_fd(fd, irqnum, &i);
if (irq == NULL) {
spin_unlock_irqrestore(&irq_lock, flags);
return;
}
os_set_pollfd(i, irq->fd);
spin_unlock_irqrestore(&irq_lock, flags);
add_sigio_fd(fd);
}
void deactivate_fd(int fd, int irqnum)
{
struct irq_fd *irq;
unsigned long flags;
int i;
spin_lock_irqsave(&irq_lock, flags);
irq = find_irq_by_fd(fd, irqnum, &i);
if (irq == NULL) {
spin_unlock_irqrestore(&irq_lock, flags);
return;
}
os_set_pollfd(i, -1);
spin_unlock_irqrestore(&irq_lock, flags);
ignore_sigio_fd(fd);
}
/*
* Called just before shutdown in order to provide a clean exec
* environment in case the system is rebooting. No locking because
* that would cause a pointless shutdown hang if something hadn't
* released the lock.
*/
int deactivate_all_fds(void)
{
struct irq_fd *irq;
int err;
for (irq = active_fds; irq != NULL; irq = irq->next) {
err = os_clear_fd_async(irq->fd);
if (err)
return err;
}
/* If there is a signal already queued, after unblocking ignore it */
os_set_ioignore();
return 0;
}
/*
* do_IRQ handles all normal device IRQs (the special
* SMP cross-CPU interrupts have their own specific
* handlers).
*/
unsigned int do_IRQ(int irq, struct uml_pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs((struct pt_regs *)regs);
irq_enter();
__do_IRQ(irq);
irq_exit();
set_irq_regs(old_regs);
return 1;
}
int um_request_irq(unsigned int irq, int fd, int type,
irq_handler_t handler,
unsigned long irqflags, const char * devname,
void *dev_id)
{
int err;
if (fd != -1) {
err = activate_fd(irq, fd, type, dev_id);
if (err)
return err;
}
return request_irq(irq, handler, irqflags, devname, dev_id);
}
EXPORT_SYMBOL(um_request_irq);
EXPORT_SYMBOL(reactivate_fd);
/*
* irq_chip must define (startup || enable) &&
* (shutdown || disable) && end
*/
static void dummy(unsigned int irq)
{
}
[PATCH] uml: add and use generic hw_controller_type->release With Chris Wedgwood <cw@f00f.org> Currently UML must explicitly call the UML-specific free_irq_by_irq_and_dev() for each free_irq call it's done. This is needed because ->shutdown and/or ->disable are only called when the last "action" for that irq is removed. Instead, for UML shared IRQs (UML IRQs are very often, if not always, shared), for each dev_id some setup is done, which must be cleared on the release of that fd. For instance, for each open console a new instance (i.e. new dev_id) of the same IRQ is requested(). Exactly, a fd is stored in an array (pollfds), which is after read by a host thread and passed to poll(). Each event registered by poll() triggers an interrupt. So, for each free_irq() we must remove the corresponding host fd from the table, which we do via this -release() method. In this patch we add an appropriate hook for this, and remove all uses of it by pointing the hook to the said procedure; this is safe to do since the said procedure. Also some cosmetic improvements are included. This is heavily based on some work by Chris Wedgwood, which however didn't get the patch merged for something I'd call a "misunderstanding" (the need for this patch wasn't cleanly explained, thus adding the generic hook was felt as undesirable). Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> CC: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22 00:16:19 +00:00
/* This is used for everything else than the timer. */
static struct irq_chip normal_irq_type = {
.typename = "SIGIO",
[PATCH] uml: add and use generic hw_controller_type->release With Chris Wedgwood <cw@f00f.org> Currently UML must explicitly call the UML-specific free_irq_by_irq_and_dev() for each free_irq call it's done. This is needed because ->shutdown and/or ->disable are only called when the last "action" for that irq is removed. Instead, for UML shared IRQs (UML IRQs are very often, if not always, shared), for each dev_id some setup is done, which must be cleared on the release of that fd. For instance, for each open console a new instance (i.e. new dev_id) of the same IRQ is requested(). Exactly, a fd is stored in an array (pollfds), which is after read by a host thread and passed to poll(). Each event registered by poll() triggers an interrupt. So, for each free_irq() we must remove the corresponding host fd from the table, which we do via this -release() method. In this patch we add an appropriate hook for this, and remove all uses of it by pointing the hook to the said procedure; this is safe to do since the said procedure. Also some cosmetic improvements are included. This is heavily based on some work by Chris Wedgwood, which however didn't get the patch merged for something I'd call a "misunderstanding" (the need for this patch wasn't cleanly explained, thus adding the generic hook was felt as undesirable). Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> CC: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22 00:16:19 +00:00
.release = free_irq_by_irq_and_dev,
.disable = dummy,
.enable = dummy,
.ack = dummy,
.end = dummy
};
static struct irq_chip SIGVTALRM_irq_type = {
.typename = "SIGVTALRM",
[PATCH] uml: add and use generic hw_controller_type->release With Chris Wedgwood <cw@f00f.org> Currently UML must explicitly call the UML-specific free_irq_by_irq_and_dev() for each free_irq call it's done. This is needed because ->shutdown and/or ->disable are only called when the last "action" for that irq is removed. Instead, for UML shared IRQs (UML IRQs are very often, if not always, shared), for each dev_id some setup is done, which must be cleared on the release of that fd. For instance, for each open console a new instance (i.e. new dev_id) of the same IRQ is requested(). Exactly, a fd is stored in an array (pollfds), which is after read by a host thread and passed to poll(). Each event registered by poll() triggers an interrupt. So, for each free_irq() we must remove the corresponding host fd from the table, which we do via this -release() method. In this patch we add an appropriate hook for this, and remove all uses of it by pointing the hook to the said procedure; this is safe to do since the said procedure. Also some cosmetic improvements are included. This is heavily based on some work by Chris Wedgwood, which however didn't get the patch merged for something I'd call a "misunderstanding" (the need for this patch wasn't cleanly explained, thus adding the generic hook was felt as undesirable). Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> CC: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22 00:16:19 +00:00
.release = free_irq_by_irq_and_dev,
.shutdown = dummy, /* never called */
.disable = dummy,
.enable = dummy,
.ack = dummy,
.end = dummy
};
void __init init_IRQ(void)
{
int i;
irq_desc[TIMER_IRQ].status = IRQ_DISABLED;
irq_desc[TIMER_IRQ].action = NULL;
irq_desc[TIMER_IRQ].depth = 1;
[PATCH] genirq: rename desc->handler to desc->chip This patch-queue improves the generic IRQ layer to be truly generic, by adding various abstractions and features to it, without impacting existing functionality. While the queue can be best described as "fix and improve everything in the generic IRQ layer that we could think of", and thus it consists of many smaller features and lots of cleanups, the one feature that stands out most is the new 'irq chip' abstraction. The irq-chip abstraction is about describing and coding and IRQ controller driver by mapping its raw hardware capabilities [and quirks, if needed] in a straightforward way, without having to think about "IRQ flow" (level/edge/etc.) type of details. This stands in contrast with the current 'irq-type' model of genirq architectures, which 'mixes' raw hardware capabilities with 'flow' details. The patchset supports both types of irq controller designs at once, and converts i386 and x86_64 to the new irq-chip design. As a bonus side-effect of the irq-chip approach, chained interrupt controllers (master/slave PIC constructs, etc.) are now supported by design as well. The end result of this patchset intends to be simpler architecture-level code and more consolidation between architectures. We reused many bits of code and many concepts from Russell King's ARM IRQ layer, the merging of which was one of the motivations for this patchset. This patch: rename desc->handler to desc->chip. Originally i did not want to do this, because it's a big patch. But having both "desc->handler", "desc->handle_irq" and "action->handler" caused a large degree of confusion and made the code appear alot less clean than it truly is. I have also attempted a dual approach as well by introducing a desc->chip alias - but that just wasnt robust enough and broke frequently. So lets get over with this quickly. The conversion was done automatically via scripts and converts all the code in the kernel. This renaming patch is the first one amongst the patches, so that the remaining patches can stay flexible and can be merged and split up without having some big monolithic patch act as a merge barrier. [akpm@osdl.org: build fix] [akpm@osdl.org: another build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 09:24:36 +00:00
irq_desc[TIMER_IRQ].chip = &SIGVTALRM_irq_type;
enable_irq(TIMER_IRQ);
for (i = 1; i < NR_IRQS; i++) {
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = NULL;
irq_desc[i].depth = 1;
[PATCH] genirq: rename desc->handler to desc->chip This patch-queue improves the generic IRQ layer to be truly generic, by adding various abstractions and features to it, without impacting existing functionality. While the queue can be best described as "fix and improve everything in the generic IRQ layer that we could think of", and thus it consists of many smaller features and lots of cleanups, the one feature that stands out most is the new 'irq chip' abstraction. The irq-chip abstraction is about describing and coding and IRQ controller driver by mapping its raw hardware capabilities [and quirks, if needed] in a straightforward way, without having to think about "IRQ flow" (level/edge/etc.) type of details. This stands in contrast with the current 'irq-type' model of genirq architectures, which 'mixes' raw hardware capabilities with 'flow' details. The patchset supports both types of irq controller designs at once, and converts i386 and x86_64 to the new irq-chip design. As a bonus side-effect of the irq-chip approach, chained interrupt controllers (master/slave PIC constructs, etc.) are now supported by design as well. The end result of this patchset intends to be simpler architecture-level code and more consolidation between architectures. We reused many bits of code and many concepts from Russell King's ARM IRQ layer, the merging of which was one of the motivations for this patchset. This patch: rename desc->handler to desc->chip. Originally i did not want to do this, because it's a big patch. But having both "desc->handler", "desc->handle_irq" and "action->handler" caused a large degree of confusion and made the code appear alot less clean than it truly is. I have also attempted a dual approach as well by introducing a desc->chip alias - but that just wasnt robust enough and broke frequently. So lets get over with this quickly. The conversion was done automatically via scripts and converts all the code in the kernel. This renaming patch is the first one amongst the patches, so that the remaining patches can stay flexible and can be merged and split up without having some big monolithic patch act as a merge barrier. [akpm@osdl.org: build fix] [akpm@osdl.org: another build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 09:24:36 +00:00
irq_desc[i].chip = &normal_irq_type;
enable_irq(i);
}
}
uml: iRQ stacks Add a separate IRQ stack. This differs from i386 in having the entire interrupt run on a separate stack rather than starting on the normal kernel stack and switching over once some preparation has been done. The underlying mechanism, is of course, sigaltstack. Another difference is that interrupts that happen in userspace are handled on the normal kernel stack. These cause a wait wakeup instead of a signal delivery so there is no point in trying to switch stacks for these. There's no other stuff on the stack, so there is no extra stack consumption. This quirk makes it possible to have the entire interrupt run on a separate stack - process preemption (and calls to schedule()) happens on a normal kernel stack. If we enable CONFIG_PREEMPT, this will need to be rethought. The IRQ stack for CPU 0 is declared in the same way as the initial kernel stack. IRQ stacks for other CPUs will be allocated dynamically. An extra field was added to the thread_info structure. When the active thread_info is copied to the IRQ stack, the real_thread field points back to the original stack. This makes it easy to tell where to copy the thread_info struct back to when the interrupt is finished. It also serves as a marker of a nested interrupt. It is NULL for the first interrupt on the stack, and non-NULL for any nested interrupts. Care is taken to behave correctly if a second interrupt comes in when the thread_info structure is being set up or taken down. I could just disable interrupts here, but I don't feel like giving up any of the performance gained by not flipping signals on and off. If an interrupt comes in during these critical periods, the handler can't run because it has no idea what shape the stack is in. So, it sets a bit for its signal in a global mask and returns. The outer handler will deal with this signal itself. Atomicity is had with xchg. A nested interrupt that needs to bail out will xchg its signal mask into pending_mask and repeat in case yet another interrupt hit at the same time, until the mask stabilizes. The outermost interrupt will set up the thread_info and xchg a zero into pending_mask when it is done. At this point, nested interrupts will look at ->real_thread and see that no setup needs to be done. They can just continue normally. Similar care needs to be taken when exiting the outer handler. If another interrupt comes in while it is copying the thread_info, it will drop a bit into pending_mask. The outer handler will check this and if it is non-zero, will loop, set up the stack again, and handle the interrupt. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 05:22:34 +00:00
/*
* IRQ stack entry and exit:
*
* Unlike i386, UML doesn't receive IRQs on the normal kernel stack
* and switch over to the IRQ stack after some preparation. We use
* sigaltstack to receive signals on a separate stack from the start.
* These two functions make sure the rest of the kernel won't be too
* upset by being on a different stack. The IRQ stack has a
* thread_info structure at the bottom so that current et al continue
* to work.
*
* to_irq_stack copies the current task's thread_info to the IRQ stack
* thread_info and sets the tasks's stack to point to the IRQ stack.
*
* from_irq_stack copies the thread_info struct back (flags may have
* been modified) and resets the task's stack pointer.
*
* Tricky bits -
*
* What happens when two signals race each other? UML doesn't block
* signals with sigprocmask, SA_DEFER, or sa_mask, so a second signal
* could arrive while a previous one is still setting up the
* thread_info.
*
* There are three cases -
* The first interrupt on the stack - sets up the thread_info and
* handles the interrupt
* A nested interrupt interrupting the copying of the thread_info -
* can't handle the interrupt, as the stack is in an unknown state
* A nested interrupt not interrupting the copying of the
* thread_info - doesn't do any setup, just handles the interrupt
*
* The first job is to figure out whether we interrupted stack setup.
* This is done by xchging the signal mask with thread_info->pending.
* If the value that comes back is zero, then there is no setup in
* progress, and the interrupt can be handled. If the value is
* non-zero, then there is stack setup in progress. In order to have
* the interrupt handled, we leave our signal in the mask, and it will
* be handled by the upper handler after it has set up the stack.
*
* Next is to figure out whether we are the outer handler or a nested
* one. As part of setting up the stack, thread_info->real_thread is
* set to non-NULL (and is reset to NULL on exit). This is the
* nesting indicator. If it is non-NULL, then the stack is already
* set up and the handler can run.
*/
static unsigned long pending_mask;
unsigned long to_irq_stack(unsigned long *mask_out)
uml: iRQ stacks Add a separate IRQ stack. This differs from i386 in having the entire interrupt run on a separate stack rather than starting on the normal kernel stack and switching over once some preparation has been done. The underlying mechanism, is of course, sigaltstack. Another difference is that interrupts that happen in userspace are handled on the normal kernel stack. These cause a wait wakeup instead of a signal delivery so there is no point in trying to switch stacks for these. There's no other stuff on the stack, so there is no extra stack consumption. This quirk makes it possible to have the entire interrupt run on a separate stack - process preemption (and calls to schedule()) happens on a normal kernel stack. If we enable CONFIG_PREEMPT, this will need to be rethought. The IRQ stack for CPU 0 is declared in the same way as the initial kernel stack. IRQ stacks for other CPUs will be allocated dynamically. An extra field was added to the thread_info structure. When the active thread_info is copied to the IRQ stack, the real_thread field points back to the original stack. This makes it easy to tell where to copy the thread_info struct back to when the interrupt is finished. It also serves as a marker of a nested interrupt. It is NULL for the first interrupt on the stack, and non-NULL for any nested interrupts. Care is taken to behave correctly if a second interrupt comes in when the thread_info structure is being set up or taken down. I could just disable interrupts here, but I don't feel like giving up any of the performance gained by not flipping signals on and off. If an interrupt comes in during these critical periods, the handler can't run because it has no idea what shape the stack is in. So, it sets a bit for its signal in a global mask and returns. The outer handler will deal with this signal itself. Atomicity is had with xchg. A nested interrupt that needs to bail out will xchg its signal mask into pending_mask and repeat in case yet another interrupt hit at the same time, until the mask stabilizes. The outermost interrupt will set up the thread_info and xchg a zero into pending_mask when it is done. At this point, nested interrupts will look at ->real_thread and see that no setup needs to be done. They can just continue normally. Similar care needs to be taken when exiting the outer handler. If another interrupt comes in while it is copying the thread_info, it will drop a bit into pending_mask. The outer handler will check this and if it is non-zero, will loop, set up the stack again, and handle the interrupt. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 05:22:34 +00:00
{
struct thread_info *ti;
unsigned long mask, old;
int nested;
mask = xchg(&pending_mask, *mask_out);
if (mask != 0) {
/*
* If any interrupts come in at this point, we want to
uml: iRQ stacks Add a separate IRQ stack. This differs from i386 in having the entire interrupt run on a separate stack rather than starting on the normal kernel stack and switching over once some preparation has been done. The underlying mechanism, is of course, sigaltstack. Another difference is that interrupts that happen in userspace are handled on the normal kernel stack. These cause a wait wakeup instead of a signal delivery so there is no point in trying to switch stacks for these. There's no other stuff on the stack, so there is no extra stack consumption. This quirk makes it possible to have the entire interrupt run on a separate stack - process preemption (and calls to schedule()) happens on a normal kernel stack. If we enable CONFIG_PREEMPT, this will need to be rethought. The IRQ stack for CPU 0 is declared in the same way as the initial kernel stack. IRQ stacks for other CPUs will be allocated dynamically. An extra field was added to the thread_info structure. When the active thread_info is copied to the IRQ stack, the real_thread field points back to the original stack. This makes it easy to tell where to copy the thread_info struct back to when the interrupt is finished. It also serves as a marker of a nested interrupt. It is NULL for the first interrupt on the stack, and non-NULL for any nested interrupts. Care is taken to behave correctly if a second interrupt comes in when the thread_info structure is being set up or taken down. I could just disable interrupts here, but I don't feel like giving up any of the performance gained by not flipping signals on and off. If an interrupt comes in during these critical periods, the handler can't run because it has no idea what shape the stack is in. So, it sets a bit for its signal in a global mask and returns. The outer handler will deal with this signal itself. Atomicity is had with xchg. A nested interrupt that needs to bail out will xchg its signal mask into pending_mask and repeat in case yet another interrupt hit at the same time, until the mask stabilizes. The outermost interrupt will set up the thread_info and xchg a zero into pending_mask when it is done. At this point, nested interrupts will look at ->real_thread and see that no setup needs to be done. They can just continue normally. Similar care needs to be taken when exiting the outer handler. If another interrupt comes in while it is copying the thread_info, it will drop a bit into pending_mask. The outer handler will check this and if it is non-zero, will loop, set up the stack again, and handle the interrupt. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 05:22:34 +00:00
* make sure that their bits aren't lost by our
* putting our bit in. So, this loop accumulates bits
* until xchg returns the same value that we put in.
* When that happens, there were no new interrupts,
* and pending_mask contains a bit for each interrupt
* that came in.
*/
old = *mask_out;
uml: iRQ stacks Add a separate IRQ stack. This differs from i386 in having the entire interrupt run on a separate stack rather than starting on the normal kernel stack and switching over once some preparation has been done. The underlying mechanism, is of course, sigaltstack. Another difference is that interrupts that happen in userspace are handled on the normal kernel stack. These cause a wait wakeup instead of a signal delivery so there is no point in trying to switch stacks for these. There's no other stuff on the stack, so there is no extra stack consumption. This quirk makes it possible to have the entire interrupt run on a separate stack - process preemption (and calls to schedule()) happens on a normal kernel stack. If we enable CONFIG_PREEMPT, this will need to be rethought. The IRQ stack for CPU 0 is declared in the same way as the initial kernel stack. IRQ stacks for other CPUs will be allocated dynamically. An extra field was added to the thread_info structure. When the active thread_info is copied to the IRQ stack, the real_thread field points back to the original stack. This makes it easy to tell where to copy the thread_info struct back to when the interrupt is finished. It also serves as a marker of a nested interrupt. It is NULL for the first interrupt on the stack, and non-NULL for any nested interrupts. Care is taken to behave correctly if a second interrupt comes in when the thread_info structure is being set up or taken down. I could just disable interrupts here, but I don't feel like giving up any of the performance gained by not flipping signals on and off. If an interrupt comes in during these critical periods, the handler can't run because it has no idea what shape the stack is in. So, it sets a bit for its signal in a global mask and returns. The outer handler will deal with this signal itself. Atomicity is had with xchg. A nested interrupt that needs to bail out will xchg its signal mask into pending_mask and repeat in case yet another interrupt hit at the same time, until the mask stabilizes. The outermost interrupt will set up the thread_info and xchg a zero into pending_mask when it is done. At this point, nested interrupts will look at ->real_thread and see that no setup needs to be done. They can just continue normally. Similar care needs to be taken when exiting the outer handler. If another interrupt comes in while it is copying the thread_info, it will drop a bit into pending_mask. The outer handler will check this and if it is non-zero, will loop, set up the stack again, and handle the interrupt. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 05:22:34 +00:00
do {
old |= mask;
mask = xchg(&pending_mask, old);
} while (mask != old);
uml: iRQ stacks Add a separate IRQ stack. This differs from i386 in having the entire interrupt run on a separate stack rather than starting on the normal kernel stack and switching over once some preparation has been done. The underlying mechanism, is of course, sigaltstack. Another difference is that interrupts that happen in userspace are handled on the normal kernel stack. These cause a wait wakeup instead of a signal delivery so there is no point in trying to switch stacks for these. There's no other stuff on the stack, so there is no extra stack consumption. This quirk makes it possible to have the entire interrupt run on a separate stack - process preemption (and calls to schedule()) happens on a normal kernel stack. If we enable CONFIG_PREEMPT, this will need to be rethought. The IRQ stack for CPU 0 is declared in the same way as the initial kernel stack. IRQ stacks for other CPUs will be allocated dynamically. An extra field was added to the thread_info structure. When the active thread_info is copied to the IRQ stack, the real_thread field points back to the original stack. This makes it easy to tell where to copy the thread_info struct back to when the interrupt is finished. It also serves as a marker of a nested interrupt. It is NULL for the first interrupt on the stack, and non-NULL for any nested interrupts. Care is taken to behave correctly if a second interrupt comes in when the thread_info structure is being set up or taken down. I could just disable interrupts here, but I don't feel like giving up any of the performance gained by not flipping signals on and off. If an interrupt comes in during these critical periods, the handler can't run because it has no idea what shape the stack is in. So, it sets a bit for its signal in a global mask and returns. The outer handler will deal with this signal itself. Atomicity is had with xchg. A nested interrupt that needs to bail out will xchg its signal mask into pending_mask and repeat in case yet another interrupt hit at the same time, until the mask stabilizes. The outermost interrupt will set up the thread_info and xchg a zero into pending_mask when it is done. At this point, nested interrupts will look at ->real_thread and see that no setup needs to be done. They can just continue normally. Similar care needs to be taken when exiting the outer handler. If another interrupt comes in while it is copying the thread_info, it will drop a bit into pending_mask. The outer handler will check this and if it is non-zero, will loop, set up the stack again, and handle the interrupt. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 05:22:34 +00:00
return 1;
}
ti = current_thread_info();
nested = (ti->real_thread != NULL);
if (!nested) {
uml: iRQ stacks Add a separate IRQ stack. This differs from i386 in having the entire interrupt run on a separate stack rather than starting on the normal kernel stack and switching over once some preparation has been done. The underlying mechanism, is of course, sigaltstack. Another difference is that interrupts that happen in userspace are handled on the normal kernel stack. These cause a wait wakeup instead of a signal delivery so there is no point in trying to switch stacks for these. There's no other stuff on the stack, so there is no extra stack consumption. This quirk makes it possible to have the entire interrupt run on a separate stack - process preemption (and calls to schedule()) happens on a normal kernel stack. If we enable CONFIG_PREEMPT, this will need to be rethought. The IRQ stack for CPU 0 is declared in the same way as the initial kernel stack. IRQ stacks for other CPUs will be allocated dynamically. An extra field was added to the thread_info structure. When the active thread_info is copied to the IRQ stack, the real_thread field points back to the original stack. This makes it easy to tell where to copy the thread_info struct back to when the interrupt is finished. It also serves as a marker of a nested interrupt. It is NULL for the first interrupt on the stack, and non-NULL for any nested interrupts. Care is taken to behave correctly if a second interrupt comes in when the thread_info structure is being set up or taken down. I could just disable interrupts here, but I don't feel like giving up any of the performance gained by not flipping signals on and off. If an interrupt comes in during these critical periods, the handler can't run because it has no idea what shape the stack is in. So, it sets a bit for its signal in a global mask and returns. The outer handler will deal with this signal itself. Atomicity is had with xchg. A nested interrupt that needs to bail out will xchg its signal mask into pending_mask and repeat in case yet another interrupt hit at the same time, until the mask stabilizes. The outermost interrupt will set up the thread_info and xchg a zero into pending_mask when it is done. At this point, nested interrupts will look at ->real_thread and see that no setup needs to be done. They can just continue normally. Similar care needs to be taken when exiting the outer handler. If another interrupt comes in while it is copying the thread_info, it will drop a bit into pending_mask. The outer handler will check this and if it is non-zero, will loop, set up the stack again, and handle the interrupt. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 05:22:34 +00:00
struct task_struct *task;
struct thread_info *tti;
task = cpu_tasks[ti->cpu].task;
tti = task_thread_info(task);
uml: iRQ stacks Add a separate IRQ stack. This differs from i386 in having the entire interrupt run on a separate stack rather than starting on the normal kernel stack and switching over once some preparation has been done. The underlying mechanism, is of course, sigaltstack. Another difference is that interrupts that happen in userspace are handled on the normal kernel stack. These cause a wait wakeup instead of a signal delivery so there is no point in trying to switch stacks for these. There's no other stuff on the stack, so there is no extra stack consumption. This quirk makes it possible to have the entire interrupt run on a separate stack - process preemption (and calls to schedule()) happens on a normal kernel stack. If we enable CONFIG_PREEMPT, this will need to be rethought. The IRQ stack for CPU 0 is declared in the same way as the initial kernel stack. IRQ stacks for other CPUs will be allocated dynamically. An extra field was added to the thread_info structure. When the active thread_info is copied to the IRQ stack, the real_thread field points back to the original stack. This makes it easy to tell where to copy the thread_info struct back to when the interrupt is finished. It also serves as a marker of a nested interrupt. It is NULL for the first interrupt on the stack, and non-NULL for any nested interrupts. Care is taken to behave correctly if a second interrupt comes in when the thread_info structure is being set up or taken down. I could just disable interrupts here, but I don't feel like giving up any of the performance gained by not flipping signals on and off. If an interrupt comes in during these critical periods, the handler can't run because it has no idea what shape the stack is in. So, it sets a bit for its signal in a global mask and returns. The outer handler will deal with this signal itself. Atomicity is had with xchg. A nested interrupt that needs to bail out will xchg its signal mask into pending_mask and repeat in case yet another interrupt hit at the same time, until the mask stabilizes. The outermost interrupt will set up the thread_info and xchg a zero into pending_mask when it is done. At this point, nested interrupts will look at ->real_thread and see that no setup needs to be done. They can just continue normally. Similar care needs to be taken when exiting the outer handler. If another interrupt comes in while it is copying the thread_info, it will drop a bit into pending_mask. The outer handler will check this and if it is non-zero, will loop, set up the stack again, and handle the interrupt. Signed-off-by: Jeff Dike <jdike@linux.intel.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-11 05:22:34 +00:00
*ti = *tti;
ti->real_thread = tti;
task->stack = ti;
}
mask = xchg(&pending_mask, 0);
*mask_out |= mask | nested;
return 0;
}
unsigned long from_irq_stack(int nested)
{
struct thread_info *ti, *to;
unsigned long mask;
ti = current_thread_info();
pending_mask = 1;
to = ti->real_thread;
current->stack = to;
ti->real_thread = NULL;
*to = *ti;
mask = xchg(&pending_mask, 0);
return mask & ~1;
}