virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
/*
|
|
|
|
* Virtio-mem device driver.
|
|
|
|
*
|
|
|
|
* Copyright Red Hat, Inc. 2020
|
|
|
|
*
|
|
|
|
* Author(s): David Hildenbrand <david@redhat.com>
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/virtio.h>
|
|
|
|
#include <linux/virtio_mem.h>
|
|
|
|
#include <linux/workqueue.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/mm.h>
|
|
|
|
#include <linux/memory_hotplug.h>
|
|
|
|
#include <linux/memory.h>
|
|
|
|
#include <linux/hrtimer.h>
|
|
|
|
#include <linux/crash_dump.h>
|
|
|
|
#include <linux/mutex.h>
|
|
|
|
#include <linux/bitmap.h>
|
|
|
|
#include <linux/lockdep.h>
|
|
|
|
|
2020-05-07 14:01:27 +00:00
|
|
|
#include <acpi/acpi_numa.h>
|
|
|
|
|
virtio-mem: Paravirtualized memory hotunplug part 2
We also want to unplug online memory (contained in online memory blocks
and, therefore, managed by the buddy), and eventually replug it later.
When requested to unplug memory, we use alloc_contig_range() to allocate
subblocks in online memory blocks (so we are the owner) and send them to
our hypervisor. When requested to plug memory, we can replug such memory
using free_contig_range() after asking our hypervisor.
We also want to mark all allocated pages PG_offline, so nobody will
touch them. To differentiate pages that were never onlined when
onlining the memory block from pages allocated via alloc_contig_range(), we
use PageDirty(). Based on this flag, virtio_mem_fake_online() can either
online the pages for the first time or use free_contig_range().
It is worth noting that there are no guarantees on how much memory can
actually get unplugged again. All device memory might completely be
fragmented with unmovable data, such that no subblock can get unplugged.
We are not touching the ZONE_MOVABLE. If memory is onlined to the
ZONE_MOVABLE, it can only get unplugged after that memory was offlined
manually by user space. In normal operation, virtio-mem memory is
suggested to be onlined to ZONE_NORMAL. In the future, we will try to
make unplug more likely to succeed.
Add a module parameter to control if online memory shall be touched.
As we want to access alloc_contig_range()/free_contig_range() from
kernel module context, export the symbols.
Note: Whenever virtio-mem uses alloc_contig_range(), all affected pages
are on the same node, in the same zone, and contain no holes.
Acked-by: Michal Hocko <mhocko@suse.com> # to export contig range allocator API
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:29 +00:00
|
|
|
static bool unplug_online = true;
|
|
|
|
module_param(unplug_online, bool, 0644);
|
|
|
|
MODULE_PARM_DESC(unplug_online, "Try to unplug online memory");
|
|
|
|
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
enum virtio_mem_mb_state {
|
|
|
|
/* Unplugged, not added to Linux. Can be reused later. */
|
|
|
|
VIRTIO_MEM_MB_STATE_UNUSED = 0,
|
|
|
|
/* (Partially) plugged, not added to Linux. Error on add_memory(). */
|
|
|
|
VIRTIO_MEM_MB_STATE_PLUGGED,
|
|
|
|
/* Fully plugged, fully added to Linux, offline. */
|
|
|
|
VIRTIO_MEM_MB_STATE_OFFLINE,
|
|
|
|
/* Partially plugged, fully added to Linux, offline. */
|
|
|
|
VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL,
|
|
|
|
/* Fully plugged, fully added to Linux, online (!ZONE_MOVABLE). */
|
|
|
|
VIRTIO_MEM_MB_STATE_ONLINE,
|
|
|
|
/* Partially plugged, fully added to Linux, online (!ZONE_MOVABLE). */
|
|
|
|
VIRTIO_MEM_MB_STATE_ONLINE_PARTIAL,
|
|
|
|
/*
|
|
|
|
* Fully plugged, fully added to Linux, online (ZONE_MOVABLE).
|
|
|
|
* We are not allowed to allocate (unplug) parts of this block that
|
|
|
|
* are not movable (similar to gigantic pages). We will never allow
|
|
|
|
* to online OFFLINE_PARTIAL to ZONE_MOVABLE (as they would contain
|
|
|
|
* unmovable parts).
|
|
|
|
*/
|
|
|
|
VIRTIO_MEM_MB_STATE_ONLINE_MOVABLE,
|
|
|
|
VIRTIO_MEM_MB_STATE_COUNT
|
|
|
|
};
|
|
|
|
|
|
|
|
struct virtio_mem {
|
|
|
|
struct virtio_device *vdev;
|
|
|
|
|
|
|
|
/* We might first have to unplug all memory when starting up. */
|
|
|
|
bool unplug_all_required;
|
|
|
|
|
|
|
|
/* Workqueue that processes the plug/unplug requests. */
|
|
|
|
struct work_struct wq;
|
|
|
|
atomic_t config_changed;
|
|
|
|
|
|
|
|
/* Virtqueue for guest->host requests. */
|
|
|
|
struct virtqueue *vq;
|
|
|
|
|
|
|
|
/* Wait for a host response to a guest request. */
|
|
|
|
wait_queue_head_t host_resp;
|
|
|
|
|
|
|
|
/* Space for one guest request and the host response. */
|
|
|
|
struct virtio_mem_req req;
|
|
|
|
struct virtio_mem_resp resp;
|
|
|
|
|
|
|
|
/* The current size of the device. */
|
|
|
|
uint64_t plugged_size;
|
|
|
|
/* The requested size of the device. */
|
|
|
|
uint64_t requested_size;
|
|
|
|
|
|
|
|
/* The device block size (for communicating with the device). */
|
|
|
|
uint32_t device_block_size;
|
2020-05-07 14:01:27 +00:00
|
|
|
/* The translated node id. NUMA_NO_NODE in case not specified. */
|
|
|
|
int nid;
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
/* Physical start address of the memory region. */
|
|
|
|
uint64_t addr;
|
|
|
|
/* Maximum region size in bytes. */
|
|
|
|
uint64_t region_size;
|
|
|
|
|
|
|
|
/* The subblock size. */
|
|
|
|
uint32_t subblock_size;
|
|
|
|
/* The number of subblocks per memory block. */
|
|
|
|
uint32_t nb_sb_per_mb;
|
|
|
|
|
|
|
|
/* Id of the first memory block of this device. */
|
|
|
|
unsigned long first_mb_id;
|
|
|
|
/* Id of the last memory block of this device. */
|
|
|
|
unsigned long last_mb_id;
|
|
|
|
/* Id of the last usable memory block of this device. */
|
|
|
|
unsigned long last_usable_mb_id;
|
|
|
|
/* Id of the next memory bock to prepare when needed. */
|
|
|
|
unsigned long next_mb_id;
|
|
|
|
|
2020-05-07 14:01:35 +00:00
|
|
|
/* The parent resource for all memory added via this device. */
|
|
|
|
struct resource *parent_resource;
|
|
|
|
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
/* Summary of all memory block states. */
|
|
|
|
unsigned long nb_mb_state[VIRTIO_MEM_MB_STATE_COUNT];
|
|
|
|
#define VIRTIO_MEM_NB_OFFLINE_THRESHOLD 10
|
|
|
|
|
|
|
|
/*
|
|
|
|
* One byte state per memory block.
|
|
|
|
*
|
|
|
|
* Allocated via vmalloc(). When preparing new blocks, resized
|
|
|
|
* (alloc+copy+free) when needed (crossing pages with the next mb).
|
|
|
|
* (when crossing pages).
|
|
|
|
*
|
|
|
|
* With 128MB memory blocks, we have states for 512GB of memory in one
|
|
|
|
* page.
|
|
|
|
*/
|
|
|
|
uint8_t *mb_state;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* $nb_sb_per_mb bit per memory block. Handled similar to mb_state.
|
|
|
|
*
|
|
|
|
* With 4MB subblocks, we manage 128GB of memory in one page.
|
|
|
|
*/
|
|
|
|
unsigned long *sb_bitmap;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Mutex that protects the nb_mb_state, mb_state, and sb_bitmap.
|
|
|
|
*
|
|
|
|
* When this lock is held the pointers can't change, ONLINE and
|
|
|
|
* OFFLINE blocks can't change the state and no subblocks will get
|
2020-05-07 14:01:28 +00:00
|
|
|
* plugged/unplugged.
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
*/
|
|
|
|
struct mutex hotplug_mutex;
|
|
|
|
bool hotplug_active;
|
|
|
|
|
|
|
|
/* An error occurred we cannot handle - stop processing requests. */
|
|
|
|
bool broken;
|
|
|
|
|
|
|
|
/* The driver is being removed. */
|
|
|
|
spinlock_t removal_lock;
|
|
|
|
bool removing;
|
|
|
|
|
|
|
|
/* Timer for retrying to plug/unplug memory. */
|
|
|
|
struct hrtimer retry_timer;
|
2020-05-07 14:01:34 +00:00
|
|
|
unsigned int retry_timer_ms;
|
|
|
|
#define VIRTIO_MEM_RETRY_TIMER_MIN_MS 50000
|
|
|
|
#define VIRTIO_MEM_RETRY_TIMER_MAX_MS 300000
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
|
|
|
|
/* Memory notifier (online/offline events). */
|
|
|
|
struct notifier_block memory_notifier;
|
|
|
|
|
|
|
|
/* Next device in the list of virtio-mem devices. */
|
|
|
|
struct list_head next;
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We have to share a single online_page callback among all virtio-mem
|
|
|
|
* devices. We use RCU to iterate the list in the callback.
|
|
|
|
*/
|
|
|
|
static DEFINE_MUTEX(virtio_mem_mutex);
|
|
|
|
static LIST_HEAD(virtio_mem_devices);
|
|
|
|
|
|
|
|
static void virtio_mem_online_page_cb(struct page *page, unsigned int order);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Register a virtio-mem device so it will be considered for the online_page
|
|
|
|
* callback.
|
|
|
|
*/
|
|
|
|
static int register_virtio_mem_device(struct virtio_mem *vm)
|
|
|
|
{
|
|
|
|
int rc = 0;
|
|
|
|
|
|
|
|
/* First device registers the callback. */
|
|
|
|
mutex_lock(&virtio_mem_mutex);
|
|
|
|
if (list_empty(&virtio_mem_devices))
|
|
|
|
rc = set_online_page_callback(&virtio_mem_online_page_cb);
|
|
|
|
if (!rc)
|
|
|
|
list_add_rcu(&vm->next, &virtio_mem_devices);
|
|
|
|
mutex_unlock(&virtio_mem_mutex);
|
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Unregister a virtio-mem device so it will no longer be considered for the
|
|
|
|
* online_page callback.
|
|
|
|
*/
|
|
|
|
static void unregister_virtio_mem_device(struct virtio_mem *vm)
|
|
|
|
{
|
|
|
|
/* Last device unregisters the callback. */
|
|
|
|
mutex_lock(&virtio_mem_mutex);
|
|
|
|
list_del_rcu(&vm->next);
|
|
|
|
if (list_empty(&virtio_mem_devices))
|
|
|
|
restore_online_page_callback(&virtio_mem_online_page_cb);
|
|
|
|
mutex_unlock(&virtio_mem_mutex);
|
|
|
|
|
|
|
|
synchronize_rcu();
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Calculate the memory block id of a given address.
|
|
|
|
*/
|
|
|
|
static unsigned long virtio_mem_phys_to_mb_id(unsigned long addr)
|
|
|
|
{
|
|
|
|
return addr / memory_block_size_bytes();
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Calculate the physical start address of a given memory block id.
|
|
|
|
*/
|
|
|
|
static unsigned long virtio_mem_mb_id_to_phys(unsigned long mb_id)
|
|
|
|
{
|
|
|
|
return mb_id * memory_block_size_bytes();
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Calculate the subblock id of a given address.
|
|
|
|
*/
|
|
|
|
static unsigned long virtio_mem_phys_to_sb_id(struct virtio_mem *vm,
|
|
|
|
unsigned long addr)
|
|
|
|
{
|
|
|
|
const unsigned long mb_id = virtio_mem_phys_to_mb_id(addr);
|
|
|
|
const unsigned long mb_addr = virtio_mem_mb_id_to_phys(mb_id);
|
|
|
|
|
|
|
|
return (addr - mb_addr) / vm->subblock_size;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set the state of a memory block, taking care of the state counter.
|
|
|
|
*/
|
|
|
|
static void virtio_mem_mb_set_state(struct virtio_mem *vm, unsigned long mb_id,
|
|
|
|
enum virtio_mem_mb_state state)
|
|
|
|
{
|
|
|
|
const unsigned long idx = mb_id - vm->first_mb_id;
|
|
|
|
enum virtio_mem_mb_state old_state;
|
|
|
|
|
|
|
|
old_state = vm->mb_state[idx];
|
|
|
|
vm->mb_state[idx] = state;
|
|
|
|
|
|
|
|
BUG_ON(vm->nb_mb_state[old_state] == 0);
|
|
|
|
vm->nb_mb_state[old_state]--;
|
|
|
|
vm->nb_mb_state[state]++;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Get the state of a memory block.
|
|
|
|
*/
|
|
|
|
static enum virtio_mem_mb_state virtio_mem_mb_get_state(struct virtio_mem *vm,
|
|
|
|
unsigned long mb_id)
|
|
|
|
{
|
|
|
|
const unsigned long idx = mb_id - vm->first_mb_id;
|
|
|
|
|
|
|
|
return vm->mb_state[idx];
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Prepare the state array for the next memory block.
|
|
|
|
*/
|
|
|
|
static int virtio_mem_mb_state_prepare_next_mb(struct virtio_mem *vm)
|
|
|
|
{
|
|
|
|
unsigned long old_bytes = vm->next_mb_id - vm->first_mb_id + 1;
|
|
|
|
unsigned long new_bytes = vm->next_mb_id - vm->first_mb_id + 2;
|
|
|
|
int old_pages = PFN_UP(old_bytes);
|
|
|
|
int new_pages = PFN_UP(new_bytes);
|
|
|
|
uint8_t *new_mb_state;
|
|
|
|
|
|
|
|
if (vm->mb_state && old_pages == new_pages)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
new_mb_state = vzalloc(new_pages * PAGE_SIZE);
|
|
|
|
if (!new_mb_state)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
mutex_lock(&vm->hotplug_mutex);
|
|
|
|
if (vm->mb_state)
|
|
|
|
memcpy(new_mb_state, vm->mb_state, old_pages * PAGE_SIZE);
|
|
|
|
vfree(vm->mb_state);
|
|
|
|
vm->mb_state = new_mb_state;
|
|
|
|
mutex_unlock(&vm->hotplug_mutex);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
#define virtio_mem_for_each_mb_state(_vm, _mb_id, _state) \
|
|
|
|
for (_mb_id = _vm->first_mb_id; \
|
|
|
|
_mb_id < _vm->next_mb_id && _vm->nb_mb_state[_state]; \
|
|
|
|
_mb_id++) \
|
|
|
|
if (virtio_mem_mb_get_state(_vm, _mb_id) == _state)
|
|
|
|
|
2020-05-07 14:01:28 +00:00
|
|
|
#define virtio_mem_for_each_mb_state_rev(_vm, _mb_id, _state) \
|
|
|
|
for (_mb_id = _vm->next_mb_id - 1; \
|
|
|
|
_mb_id >= _vm->first_mb_id && _vm->nb_mb_state[_state]; \
|
|
|
|
_mb_id--) \
|
|
|
|
if (virtio_mem_mb_get_state(_vm, _mb_id) == _state)
|
|
|
|
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
/*
|
|
|
|
* Mark all selected subblocks plugged.
|
|
|
|
*
|
|
|
|
* Will not modify the state of the memory block.
|
|
|
|
*/
|
|
|
|
static void virtio_mem_mb_set_sb_plugged(struct virtio_mem *vm,
|
|
|
|
unsigned long mb_id, int sb_id,
|
|
|
|
int count)
|
|
|
|
{
|
|
|
|
const int bit = (mb_id - vm->first_mb_id) * vm->nb_sb_per_mb + sb_id;
|
|
|
|
|
|
|
|
__bitmap_set(vm->sb_bitmap, bit, count);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Mark all selected subblocks unplugged.
|
|
|
|
*
|
|
|
|
* Will not modify the state of the memory block.
|
|
|
|
*/
|
|
|
|
static void virtio_mem_mb_set_sb_unplugged(struct virtio_mem *vm,
|
|
|
|
unsigned long mb_id, int sb_id,
|
|
|
|
int count)
|
|
|
|
{
|
|
|
|
const int bit = (mb_id - vm->first_mb_id) * vm->nb_sb_per_mb + sb_id;
|
|
|
|
|
|
|
|
__bitmap_clear(vm->sb_bitmap, bit, count);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Test if all selected subblocks are plugged.
|
|
|
|
*/
|
|
|
|
static bool virtio_mem_mb_test_sb_plugged(struct virtio_mem *vm,
|
|
|
|
unsigned long mb_id, int sb_id,
|
|
|
|
int count)
|
|
|
|
{
|
|
|
|
const int bit = (mb_id - vm->first_mb_id) * vm->nb_sb_per_mb + sb_id;
|
|
|
|
|
|
|
|
if (count == 1)
|
|
|
|
return test_bit(bit, vm->sb_bitmap);
|
|
|
|
|
|
|
|
/* TODO: Helper similar to bitmap_set() */
|
|
|
|
return find_next_zero_bit(vm->sb_bitmap, bit + count, bit) >=
|
|
|
|
bit + count;
|
|
|
|
}
|
|
|
|
|
2020-05-07 14:01:28 +00:00
|
|
|
/*
|
|
|
|
* Test if all selected subblocks are unplugged.
|
|
|
|
*/
|
|
|
|
static bool virtio_mem_mb_test_sb_unplugged(struct virtio_mem *vm,
|
|
|
|
unsigned long mb_id, int sb_id,
|
|
|
|
int count)
|
|
|
|
{
|
|
|
|
const int bit = (mb_id - vm->first_mb_id) * vm->nb_sb_per_mb + sb_id;
|
|
|
|
|
|
|
|
/* TODO: Helper similar to bitmap_set() */
|
|
|
|
return find_next_bit(vm->sb_bitmap, bit + count, bit) >= bit + count;
|
|
|
|
}
|
|
|
|
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
/*
|
|
|
|
* Find the first plugged subblock. Returns vm->nb_sb_per_mb in case there is
|
|
|
|
* none.
|
|
|
|
*/
|
|
|
|
static int virtio_mem_mb_first_plugged_sb(struct virtio_mem *vm,
|
|
|
|
unsigned long mb_id)
|
|
|
|
{
|
|
|
|
const int bit = (mb_id - vm->first_mb_id) * vm->nb_sb_per_mb;
|
|
|
|
|
|
|
|
return find_next_bit(vm->sb_bitmap, bit + vm->nb_sb_per_mb, bit) - bit;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Find the first unplugged subblock. Returns vm->nb_sb_per_mb in case there is
|
|
|
|
* none.
|
|
|
|
*/
|
|
|
|
static int virtio_mem_mb_first_unplugged_sb(struct virtio_mem *vm,
|
|
|
|
unsigned long mb_id)
|
|
|
|
{
|
|
|
|
const int bit = (mb_id - vm->first_mb_id) * vm->nb_sb_per_mb;
|
|
|
|
|
|
|
|
return find_next_zero_bit(vm->sb_bitmap, bit + vm->nb_sb_per_mb, bit) -
|
|
|
|
bit;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Prepare the subblock bitmap for the next memory block.
|
|
|
|
*/
|
|
|
|
static int virtio_mem_sb_bitmap_prepare_next_mb(struct virtio_mem *vm)
|
|
|
|
{
|
|
|
|
const unsigned long old_nb_mb = vm->next_mb_id - vm->first_mb_id;
|
|
|
|
const unsigned long old_nb_bits = old_nb_mb * vm->nb_sb_per_mb;
|
|
|
|
const unsigned long new_nb_bits = (old_nb_mb + 1) * vm->nb_sb_per_mb;
|
|
|
|
int old_pages = PFN_UP(BITS_TO_LONGS(old_nb_bits) * sizeof(long));
|
|
|
|
int new_pages = PFN_UP(BITS_TO_LONGS(new_nb_bits) * sizeof(long));
|
|
|
|
unsigned long *new_sb_bitmap, *old_sb_bitmap;
|
|
|
|
|
|
|
|
if (vm->sb_bitmap && old_pages == new_pages)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
new_sb_bitmap = vzalloc(new_pages * PAGE_SIZE);
|
|
|
|
if (!new_sb_bitmap)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
mutex_lock(&vm->hotplug_mutex);
|
|
|
|
if (new_sb_bitmap)
|
|
|
|
memcpy(new_sb_bitmap, vm->sb_bitmap, old_pages * PAGE_SIZE);
|
|
|
|
|
|
|
|
old_sb_bitmap = vm->sb_bitmap;
|
|
|
|
vm->sb_bitmap = new_sb_bitmap;
|
|
|
|
mutex_unlock(&vm->hotplug_mutex);
|
|
|
|
|
|
|
|
vfree(old_sb_bitmap);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Try to add a memory block to Linux. This will usually only fail
|
|
|
|
* if out of memory.
|
|
|
|
*
|
|
|
|
* Must not be called with the vm->hotplug_mutex held (possible deadlock with
|
|
|
|
* onlining code).
|
|
|
|
*
|
|
|
|
* Will not modify the state of the memory block.
|
|
|
|
*/
|
|
|
|
static int virtio_mem_mb_add(struct virtio_mem *vm, unsigned long mb_id)
|
|
|
|
{
|
|
|
|
const uint64_t addr = virtio_mem_mb_id_to_phys(mb_id);
|
2020-05-07 14:01:27 +00:00
|
|
|
int nid = vm->nid;
|
|
|
|
|
|
|
|
if (nid == NUMA_NO_NODE)
|
|
|
|
nid = memory_add_physaddr_to_nid(addr);
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
|
|
|
|
dev_dbg(&vm->vdev->dev, "adding memory block: %lu\n", mb_id);
|
|
|
|
return add_memory(nid, addr, memory_block_size_bytes());
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Try to remove a memory block from Linux. Will only fail if the memory block
|
|
|
|
* is not offline.
|
|
|
|
*
|
|
|
|
* Must not be called with the vm->hotplug_mutex held (possible deadlock with
|
|
|
|
* onlining code).
|
|
|
|
*
|
|
|
|
* Will not modify the state of the memory block.
|
|
|
|
*/
|
|
|
|
static int virtio_mem_mb_remove(struct virtio_mem *vm, unsigned long mb_id)
|
|
|
|
{
|
|
|
|
const uint64_t addr = virtio_mem_mb_id_to_phys(mb_id);
|
2020-05-07 14:01:27 +00:00
|
|
|
int nid = vm->nid;
|
|
|
|
|
|
|
|
if (nid == NUMA_NO_NODE)
|
|
|
|
nid = memory_add_physaddr_to_nid(addr);
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
|
|
|
|
dev_dbg(&vm->vdev->dev, "removing memory block: %lu\n", mb_id);
|
|
|
|
return remove_memory(nid, addr, memory_block_size_bytes());
|
|
|
|
}
|
|
|
|
|
2020-05-07 14:01:33 +00:00
|
|
|
/*
|
|
|
|
* Try to offline and remove a memory block from Linux.
|
|
|
|
*
|
|
|
|
* Must not be called with the vm->hotplug_mutex held (possible deadlock with
|
|
|
|
* onlining code).
|
|
|
|
*
|
|
|
|
* Will not modify the state of the memory block.
|
|
|
|
*/
|
|
|
|
static int virtio_mem_mb_offline_and_remove(struct virtio_mem *vm,
|
|
|
|
unsigned long mb_id)
|
|
|
|
{
|
|
|
|
const uint64_t addr = virtio_mem_mb_id_to_phys(mb_id);
|
|
|
|
int nid = vm->nid;
|
|
|
|
|
|
|
|
if (nid == NUMA_NO_NODE)
|
|
|
|
nid = memory_add_physaddr_to_nid(addr);
|
|
|
|
|
|
|
|
dev_dbg(&vm->vdev->dev, "offlining and removing memory block: %lu\n",
|
|
|
|
mb_id);
|
|
|
|
return offline_and_remove_memory(nid, addr, memory_block_size_bytes());
|
|
|
|
}
|
|
|
|
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
/*
|
|
|
|
* Trigger the workqueue so the device can perform its magic.
|
|
|
|
*/
|
|
|
|
static void virtio_mem_retry(struct virtio_mem *vm)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&vm->removal_lock, flags);
|
|
|
|
if (!vm->removing)
|
|
|
|
queue_work(system_freezable_wq, &vm->wq);
|
|
|
|
spin_unlock_irqrestore(&vm->removal_lock, flags);
|
|
|
|
}
|
|
|
|
|
2020-05-07 14:01:27 +00:00
|
|
|
static int virtio_mem_translate_node_id(struct virtio_mem *vm, uint16_t node_id)
|
|
|
|
{
|
|
|
|
int node = NUMA_NO_NODE;
|
|
|
|
|
|
|
|
#if defined(CONFIG_ACPI_NUMA)
|
|
|
|
if (virtio_has_feature(vm->vdev, VIRTIO_MEM_F_ACPI_PXM))
|
|
|
|
node = pxm_to_node(node_id);
|
|
|
|
#endif
|
|
|
|
return node;
|
|
|
|
}
|
|
|
|
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
/*
|
|
|
|
* Test if a virtio-mem device overlaps with the given range. Can be called
|
|
|
|
* from (notifier) callbacks lockless.
|
|
|
|
*/
|
|
|
|
static bool virtio_mem_overlaps_range(struct virtio_mem *vm,
|
|
|
|
unsigned long start, unsigned long size)
|
|
|
|
{
|
|
|
|
unsigned long dev_start = virtio_mem_mb_id_to_phys(vm->first_mb_id);
|
|
|
|
unsigned long dev_end = virtio_mem_mb_id_to_phys(vm->last_mb_id) +
|
|
|
|
memory_block_size_bytes();
|
|
|
|
|
|
|
|
return start < dev_end && dev_start < start + size;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Test if a virtio-mem device owns a memory block. Can be called from
|
|
|
|
* (notifier) callbacks lockless.
|
|
|
|
*/
|
|
|
|
static bool virtio_mem_owned_mb(struct virtio_mem *vm, unsigned long mb_id)
|
|
|
|
{
|
|
|
|
return mb_id >= vm->first_mb_id && mb_id <= vm->last_mb_id;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int virtio_mem_notify_going_online(struct virtio_mem *vm,
|
|
|
|
unsigned long mb_id,
|
|
|
|
enum zone_type zone)
|
|
|
|
{
|
|
|
|
switch (virtio_mem_mb_get_state(vm, mb_id)) {
|
|
|
|
case VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL:
|
|
|
|
/*
|
|
|
|
* We won't allow to online a partially plugged memory block
|
|
|
|
* to the MOVABLE zone - it would contain unmovable parts.
|
|
|
|
*/
|
|
|
|
if (zone == ZONE_MOVABLE) {
|
|
|
|
dev_warn_ratelimited(&vm->vdev->dev,
|
|
|
|
"memory block has holes, MOVABLE not supported\n");
|
|
|
|
return NOTIFY_BAD;
|
|
|
|
}
|
|
|
|
return NOTIFY_OK;
|
|
|
|
case VIRTIO_MEM_MB_STATE_OFFLINE:
|
|
|
|
return NOTIFY_OK;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
dev_warn_ratelimited(&vm->vdev->dev,
|
|
|
|
"memory block onlining denied\n");
|
|
|
|
return NOTIFY_BAD;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void virtio_mem_notify_offline(struct virtio_mem *vm,
|
|
|
|
unsigned long mb_id)
|
|
|
|
{
|
|
|
|
switch (virtio_mem_mb_get_state(vm, mb_id)) {
|
|
|
|
case VIRTIO_MEM_MB_STATE_ONLINE_PARTIAL:
|
|
|
|
virtio_mem_mb_set_state(vm, mb_id,
|
|
|
|
VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL);
|
|
|
|
break;
|
|
|
|
case VIRTIO_MEM_MB_STATE_ONLINE:
|
|
|
|
case VIRTIO_MEM_MB_STATE_ONLINE_MOVABLE:
|
|
|
|
virtio_mem_mb_set_state(vm, mb_id,
|
|
|
|
VIRTIO_MEM_MB_STATE_OFFLINE);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
BUG();
|
|
|
|
break;
|
|
|
|
}
|
2020-05-07 14:01:28 +00:00
|
|
|
|
2020-05-07 14:01:33 +00:00
|
|
|
/*
|
|
|
|
* Trigger the workqueue, maybe we can now unplug memory. Also,
|
|
|
|
* when we offline and remove a memory block, this will re-trigger
|
|
|
|
* us immediately - which is often nice because the removal of
|
|
|
|
* the memory block (e.g., memmap) might have freed up memory
|
|
|
|
* on other memory blocks we manage.
|
|
|
|
*/
|
2020-05-07 14:01:28 +00:00
|
|
|
virtio_mem_retry(vm);
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void virtio_mem_notify_online(struct virtio_mem *vm, unsigned long mb_id,
|
|
|
|
enum zone_type zone)
|
|
|
|
{
|
|
|
|
unsigned long nb_offline;
|
|
|
|
|
|
|
|
switch (virtio_mem_mb_get_state(vm, mb_id)) {
|
|
|
|
case VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL:
|
|
|
|
BUG_ON(zone == ZONE_MOVABLE);
|
|
|
|
virtio_mem_mb_set_state(vm, mb_id,
|
|
|
|
VIRTIO_MEM_MB_STATE_ONLINE_PARTIAL);
|
|
|
|
break;
|
|
|
|
case VIRTIO_MEM_MB_STATE_OFFLINE:
|
|
|
|
if (zone == ZONE_MOVABLE)
|
|
|
|
virtio_mem_mb_set_state(vm, mb_id,
|
|
|
|
VIRTIO_MEM_MB_STATE_ONLINE_MOVABLE);
|
|
|
|
else
|
|
|
|
virtio_mem_mb_set_state(vm, mb_id,
|
|
|
|
VIRTIO_MEM_MB_STATE_ONLINE);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
BUG();
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
nb_offline = vm->nb_mb_state[VIRTIO_MEM_MB_STATE_OFFLINE] +
|
|
|
|
vm->nb_mb_state[VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL];
|
|
|
|
|
|
|
|
/* see if we can add new blocks now that we onlined one block */
|
|
|
|
if (nb_offline == VIRTIO_MEM_NB_OFFLINE_THRESHOLD - 1)
|
|
|
|
virtio_mem_retry(vm);
|
|
|
|
}
|
|
|
|
|
2020-05-07 14:01:31 +00:00
|
|
|
static void virtio_mem_notify_going_offline(struct virtio_mem *vm,
|
|
|
|
unsigned long mb_id)
|
|
|
|
{
|
|
|
|
const unsigned long nr_pages = PFN_DOWN(vm->subblock_size);
|
|
|
|
struct page *page;
|
|
|
|
unsigned long pfn;
|
|
|
|
int sb_id, i;
|
|
|
|
|
|
|
|
for (sb_id = 0; sb_id < vm->nb_sb_per_mb; sb_id++) {
|
|
|
|
if (virtio_mem_mb_test_sb_plugged(vm, mb_id, sb_id, 1))
|
|
|
|
continue;
|
|
|
|
/*
|
|
|
|
* Drop our reference to the pages so the memory can get
|
|
|
|
* offlined and add the unplugged pages to the managed
|
|
|
|
* page counters (so offlining code can correctly subtract
|
|
|
|
* them again).
|
|
|
|
*/
|
|
|
|
pfn = PFN_DOWN(virtio_mem_mb_id_to_phys(mb_id) +
|
|
|
|
sb_id * vm->subblock_size);
|
|
|
|
adjust_managed_page_count(pfn_to_page(pfn), nr_pages);
|
|
|
|
for (i = 0; i < nr_pages; i++) {
|
|
|
|
page = pfn_to_page(pfn + i);
|
|
|
|
if (WARN_ON(!page_ref_dec_and_test(page)))
|
|
|
|
dump_page(page, "unplugged page referenced");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void virtio_mem_notify_cancel_offline(struct virtio_mem *vm,
|
|
|
|
unsigned long mb_id)
|
|
|
|
{
|
|
|
|
const unsigned long nr_pages = PFN_DOWN(vm->subblock_size);
|
|
|
|
unsigned long pfn;
|
|
|
|
int sb_id, i;
|
|
|
|
|
|
|
|
for (sb_id = 0; sb_id < vm->nb_sb_per_mb; sb_id++) {
|
|
|
|
if (virtio_mem_mb_test_sb_plugged(vm, mb_id, sb_id, 1))
|
|
|
|
continue;
|
|
|
|
/*
|
|
|
|
* Get the reference we dropped when going offline and
|
|
|
|
* subtract the unplugged pages from the managed page
|
|
|
|
* counters.
|
|
|
|
*/
|
|
|
|
pfn = PFN_DOWN(virtio_mem_mb_id_to_phys(mb_id) +
|
|
|
|
sb_id * vm->subblock_size);
|
|
|
|
adjust_managed_page_count(pfn_to_page(pfn), -nr_pages);
|
|
|
|
for (i = 0; i < nr_pages; i++)
|
|
|
|
page_ref_inc(pfn_to_page(pfn + i));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
/*
|
|
|
|
* This callback will either be called synchronously from add_memory() or
|
|
|
|
* asynchronously (e.g., triggered via user space). We have to be careful
|
|
|
|
* with locking when calling add_memory().
|
|
|
|
*/
|
|
|
|
static int virtio_mem_memory_notifier_cb(struct notifier_block *nb,
|
|
|
|
unsigned long action, void *arg)
|
|
|
|
{
|
|
|
|
struct virtio_mem *vm = container_of(nb, struct virtio_mem,
|
|
|
|
memory_notifier);
|
|
|
|
struct memory_notify *mhp = arg;
|
|
|
|
const unsigned long start = PFN_PHYS(mhp->start_pfn);
|
|
|
|
const unsigned long size = PFN_PHYS(mhp->nr_pages);
|
|
|
|
const unsigned long mb_id = virtio_mem_phys_to_mb_id(start);
|
|
|
|
enum zone_type zone;
|
|
|
|
int rc = NOTIFY_OK;
|
|
|
|
|
|
|
|
if (!virtio_mem_overlaps_range(vm, start, size))
|
|
|
|
return NOTIFY_DONE;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Memory is onlined/offlined in memory block granularity. We cannot
|
|
|
|
* cross virtio-mem device boundaries and memory block boundaries. Bail
|
|
|
|
* out if this ever changes.
|
|
|
|
*/
|
|
|
|
if (WARN_ON_ONCE(size != memory_block_size_bytes() ||
|
|
|
|
!IS_ALIGNED(start, memory_block_size_bytes())))
|
|
|
|
return NOTIFY_BAD;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Avoid circular locking lockdep warnings. We lock the mutex
|
|
|
|
* e.g., in MEM_GOING_ONLINE and unlock it in MEM_ONLINE. The
|
|
|
|
* blocking_notifier_call_chain() has it's own lock, which gets unlocked
|
|
|
|
* between both notifier calls and will bail out. False positive.
|
|
|
|
*/
|
|
|
|
lockdep_off();
|
|
|
|
|
|
|
|
switch (action) {
|
|
|
|
case MEM_GOING_OFFLINE:
|
|
|
|
mutex_lock(&vm->hotplug_mutex);
|
|
|
|
if (vm->removing) {
|
|
|
|
rc = notifier_from_errno(-EBUSY);
|
|
|
|
mutex_unlock(&vm->hotplug_mutex);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
vm->hotplug_active = true;
|
2020-05-07 14:01:31 +00:00
|
|
|
virtio_mem_notify_going_offline(vm, mb_id);
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
break;
|
|
|
|
case MEM_GOING_ONLINE:
|
|
|
|
mutex_lock(&vm->hotplug_mutex);
|
|
|
|
if (vm->removing) {
|
|
|
|
rc = notifier_from_errno(-EBUSY);
|
|
|
|
mutex_unlock(&vm->hotplug_mutex);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
vm->hotplug_active = true;
|
|
|
|
zone = page_zonenum(pfn_to_page(mhp->start_pfn));
|
|
|
|
rc = virtio_mem_notify_going_online(vm, mb_id, zone);
|
|
|
|
break;
|
|
|
|
case MEM_OFFLINE:
|
|
|
|
virtio_mem_notify_offline(vm, mb_id);
|
|
|
|
vm->hotplug_active = false;
|
|
|
|
mutex_unlock(&vm->hotplug_mutex);
|
|
|
|
break;
|
|
|
|
case MEM_ONLINE:
|
|
|
|
zone = page_zonenum(pfn_to_page(mhp->start_pfn));
|
|
|
|
virtio_mem_notify_online(vm, mb_id, zone);
|
|
|
|
vm->hotplug_active = false;
|
|
|
|
mutex_unlock(&vm->hotplug_mutex);
|
|
|
|
break;
|
|
|
|
case MEM_CANCEL_OFFLINE:
|
2020-05-07 14:01:31 +00:00
|
|
|
if (!vm->hotplug_active)
|
|
|
|
break;
|
|
|
|
virtio_mem_notify_cancel_offline(vm, mb_id);
|
|
|
|
vm->hotplug_active = false;
|
|
|
|
mutex_unlock(&vm->hotplug_mutex);
|
|
|
|
break;
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
case MEM_CANCEL_ONLINE:
|
|
|
|
if (!vm->hotplug_active)
|
|
|
|
break;
|
|
|
|
vm->hotplug_active = false;
|
|
|
|
mutex_unlock(&vm->hotplug_mutex);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
lockdep_on();
|
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
virtio-mem: Paravirtualized memory hotunplug part 2
We also want to unplug online memory (contained in online memory blocks
and, therefore, managed by the buddy), and eventually replug it later.
When requested to unplug memory, we use alloc_contig_range() to allocate
subblocks in online memory blocks (so we are the owner) and send them to
our hypervisor. When requested to plug memory, we can replug such memory
using free_contig_range() after asking our hypervisor.
We also want to mark all allocated pages PG_offline, so nobody will
touch them. To differentiate pages that were never onlined when
onlining the memory block from pages allocated via alloc_contig_range(), we
use PageDirty(). Based on this flag, virtio_mem_fake_online() can either
online the pages for the first time or use free_contig_range().
It is worth noting that there are no guarantees on how much memory can
actually get unplugged again. All device memory might completely be
fragmented with unmovable data, such that no subblock can get unplugged.
We are not touching the ZONE_MOVABLE. If memory is onlined to the
ZONE_MOVABLE, it can only get unplugged after that memory was offlined
manually by user space. In normal operation, virtio-mem memory is
suggested to be onlined to ZONE_NORMAL. In the future, we will try to
make unplug more likely to succeed.
Add a module parameter to control if online memory shall be touched.
As we want to access alloc_contig_range()/free_contig_range() from
kernel module context, export the symbols.
Note: Whenever virtio-mem uses alloc_contig_range(), all affected pages
are on the same node, in the same zone, and contain no holes.
Acked-by: Michal Hocko <mhocko@suse.com> # to export contig range allocator API
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:29 +00:00
|
|
|
* Set a range of pages PG_offline. Remember pages that were never onlined
|
|
|
|
* (via generic_online_page()) using PageDirty().
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
*/
|
|
|
|
static void virtio_mem_set_fake_offline(unsigned long pfn,
|
virtio-mem: Paravirtualized memory hotunplug part 2
We also want to unplug online memory (contained in online memory blocks
and, therefore, managed by the buddy), and eventually replug it later.
When requested to unplug memory, we use alloc_contig_range() to allocate
subblocks in online memory blocks (so we are the owner) and send them to
our hypervisor. When requested to plug memory, we can replug such memory
using free_contig_range() after asking our hypervisor.
We also want to mark all allocated pages PG_offline, so nobody will
touch them. To differentiate pages that were never onlined when
onlining the memory block from pages allocated via alloc_contig_range(), we
use PageDirty(). Based on this flag, virtio_mem_fake_online() can either
online the pages for the first time or use free_contig_range().
It is worth noting that there are no guarantees on how much memory can
actually get unplugged again. All device memory might completely be
fragmented with unmovable data, such that no subblock can get unplugged.
We are not touching the ZONE_MOVABLE. If memory is onlined to the
ZONE_MOVABLE, it can only get unplugged after that memory was offlined
manually by user space. In normal operation, virtio-mem memory is
suggested to be onlined to ZONE_NORMAL. In the future, we will try to
make unplug more likely to succeed.
Add a module parameter to control if online memory shall be touched.
As we want to access alloc_contig_range()/free_contig_range() from
kernel module context, export the symbols.
Note: Whenever virtio-mem uses alloc_contig_range(), all affected pages
are on the same node, in the same zone, and contain no holes.
Acked-by: Michal Hocko <mhocko@suse.com> # to export contig range allocator API
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:29 +00:00
|
|
|
unsigned int nr_pages, bool onlined)
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
{
|
virtio-mem: Paravirtualized memory hotunplug part 2
We also want to unplug online memory (contained in online memory blocks
and, therefore, managed by the buddy), and eventually replug it later.
When requested to unplug memory, we use alloc_contig_range() to allocate
subblocks in online memory blocks (so we are the owner) and send them to
our hypervisor. When requested to plug memory, we can replug such memory
using free_contig_range() after asking our hypervisor.
We also want to mark all allocated pages PG_offline, so nobody will
touch them. To differentiate pages that were never onlined when
onlining the memory block from pages allocated via alloc_contig_range(), we
use PageDirty(). Based on this flag, virtio_mem_fake_online() can either
online the pages for the first time or use free_contig_range().
It is worth noting that there are no guarantees on how much memory can
actually get unplugged again. All device memory might completely be
fragmented with unmovable data, such that no subblock can get unplugged.
We are not touching the ZONE_MOVABLE. If memory is onlined to the
ZONE_MOVABLE, it can only get unplugged after that memory was offlined
manually by user space. In normal operation, virtio-mem memory is
suggested to be onlined to ZONE_NORMAL. In the future, we will try to
make unplug more likely to succeed.
Add a module parameter to control if online memory shall be touched.
As we want to access alloc_contig_range()/free_contig_range() from
kernel module context, export the symbols.
Note: Whenever virtio-mem uses alloc_contig_range(), all affected pages
are on the same node, in the same zone, and contain no holes.
Acked-by: Michal Hocko <mhocko@suse.com> # to export contig range allocator API
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:29 +00:00
|
|
|
for (; nr_pages--; pfn++) {
|
|
|
|
struct page *page = pfn_to_page(pfn);
|
|
|
|
|
|
|
|
__SetPageOffline(page);
|
2020-05-07 14:01:31 +00:00
|
|
|
if (!onlined) {
|
virtio-mem: Paravirtualized memory hotunplug part 2
We also want to unplug online memory (contained in online memory blocks
and, therefore, managed by the buddy), and eventually replug it later.
When requested to unplug memory, we use alloc_contig_range() to allocate
subblocks in online memory blocks (so we are the owner) and send them to
our hypervisor. When requested to plug memory, we can replug such memory
using free_contig_range() after asking our hypervisor.
We also want to mark all allocated pages PG_offline, so nobody will
touch them. To differentiate pages that were never onlined when
onlining the memory block from pages allocated via alloc_contig_range(), we
use PageDirty(). Based on this flag, virtio_mem_fake_online() can either
online the pages for the first time or use free_contig_range().
It is worth noting that there are no guarantees on how much memory can
actually get unplugged again. All device memory might completely be
fragmented with unmovable data, such that no subblock can get unplugged.
We are not touching the ZONE_MOVABLE. If memory is onlined to the
ZONE_MOVABLE, it can only get unplugged after that memory was offlined
manually by user space. In normal operation, virtio-mem memory is
suggested to be onlined to ZONE_NORMAL. In the future, we will try to
make unplug more likely to succeed.
Add a module parameter to control if online memory shall be touched.
As we want to access alloc_contig_range()/free_contig_range() from
kernel module context, export the symbols.
Note: Whenever virtio-mem uses alloc_contig_range(), all affected pages
are on the same node, in the same zone, and contain no holes.
Acked-by: Michal Hocko <mhocko@suse.com> # to export contig range allocator API
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:29 +00:00
|
|
|
SetPageDirty(page);
|
2020-05-07 14:01:31 +00:00
|
|
|
/* FIXME: remove after cleanups */
|
|
|
|
ClearPageReserved(page);
|
|
|
|
}
|
virtio-mem: Paravirtualized memory hotunplug part 2
We also want to unplug online memory (contained in online memory blocks
and, therefore, managed by the buddy), and eventually replug it later.
When requested to unplug memory, we use alloc_contig_range() to allocate
subblocks in online memory blocks (so we are the owner) and send them to
our hypervisor. When requested to plug memory, we can replug such memory
using free_contig_range() after asking our hypervisor.
We also want to mark all allocated pages PG_offline, so nobody will
touch them. To differentiate pages that were never onlined when
onlining the memory block from pages allocated via alloc_contig_range(), we
use PageDirty(). Based on this flag, virtio_mem_fake_online() can either
online the pages for the first time or use free_contig_range().
It is worth noting that there are no guarantees on how much memory can
actually get unplugged again. All device memory might completely be
fragmented with unmovable data, such that no subblock can get unplugged.
We are not touching the ZONE_MOVABLE. If memory is onlined to the
ZONE_MOVABLE, it can only get unplugged after that memory was offlined
manually by user space. In normal operation, virtio-mem memory is
suggested to be onlined to ZONE_NORMAL. In the future, we will try to
make unplug more likely to succeed.
Add a module parameter to control if online memory shall be touched.
As we want to access alloc_contig_range()/free_contig_range() from
kernel module context, export the symbols.
Note: Whenever virtio-mem uses alloc_contig_range(), all affected pages
are on the same node, in the same zone, and contain no holes.
Acked-by: Michal Hocko <mhocko@suse.com> # to export contig range allocator API
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:29 +00:00
|
|
|
}
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
virtio-mem: Paravirtualized memory hotunplug part 2
We also want to unplug online memory (contained in online memory blocks
and, therefore, managed by the buddy), and eventually replug it later.
When requested to unplug memory, we use alloc_contig_range() to allocate
subblocks in online memory blocks (so we are the owner) and send them to
our hypervisor. When requested to plug memory, we can replug such memory
using free_contig_range() after asking our hypervisor.
We also want to mark all allocated pages PG_offline, so nobody will
touch them. To differentiate pages that were never onlined when
onlining the memory block from pages allocated via alloc_contig_range(), we
use PageDirty(). Based on this flag, virtio_mem_fake_online() can either
online the pages for the first time or use free_contig_range().
It is worth noting that there are no guarantees on how much memory can
actually get unplugged again. All device memory might completely be
fragmented with unmovable data, such that no subblock can get unplugged.
We are not touching the ZONE_MOVABLE. If memory is onlined to the
ZONE_MOVABLE, it can only get unplugged after that memory was offlined
manually by user space. In normal operation, virtio-mem memory is
suggested to be onlined to ZONE_NORMAL. In the future, we will try to
make unplug more likely to succeed.
Add a module parameter to control if online memory shall be touched.
As we want to access alloc_contig_range()/free_contig_range() from
kernel module context, export the symbols.
Note: Whenever virtio-mem uses alloc_contig_range(), all affected pages
are on the same node, in the same zone, and contain no holes.
Acked-by: Michal Hocko <mhocko@suse.com> # to export contig range allocator API
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:29 +00:00
|
|
|
* Clear PG_offline from a range of pages. If the pages were never onlined,
|
|
|
|
* (via generic_online_page()), clear PageDirty().
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
*/
|
|
|
|
static void virtio_mem_clear_fake_offline(unsigned long pfn,
|
virtio-mem: Paravirtualized memory hotunplug part 2
We also want to unplug online memory (contained in online memory blocks
and, therefore, managed by the buddy), and eventually replug it later.
When requested to unplug memory, we use alloc_contig_range() to allocate
subblocks in online memory blocks (so we are the owner) and send them to
our hypervisor. When requested to plug memory, we can replug such memory
using free_contig_range() after asking our hypervisor.
We also want to mark all allocated pages PG_offline, so nobody will
touch them. To differentiate pages that were never onlined when
onlining the memory block from pages allocated via alloc_contig_range(), we
use PageDirty(). Based on this flag, virtio_mem_fake_online() can either
online the pages for the first time or use free_contig_range().
It is worth noting that there are no guarantees on how much memory can
actually get unplugged again. All device memory might completely be
fragmented with unmovable data, such that no subblock can get unplugged.
We are not touching the ZONE_MOVABLE. If memory is onlined to the
ZONE_MOVABLE, it can only get unplugged after that memory was offlined
manually by user space. In normal operation, virtio-mem memory is
suggested to be onlined to ZONE_NORMAL. In the future, we will try to
make unplug more likely to succeed.
Add a module parameter to control if online memory shall be touched.
As we want to access alloc_contig_range()/free_contig_range() from
kernel module context, export the symbols.
Note: Whenever virtio-mem uses alloc_contig_range(), all affected pages
are on the same node, in the same zone, and contain no holes.
Acked-by: Michal Hocko <mhocko@suse.com> # to export contig range allocator API
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:29 +00:00
|
|
|
unsigned int nr_pages, bool onlined)
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
{
|
virtio-mem: Paravirtualized memory hotunplug part 2
We also want to unplug online memory (contained in online memory blocks
and, therefore, managed by the buddy), and eventually replug it later.
When requested to unplug memory, we use alloc_contig_range() to allocate
subblocks in online memory blocks (so we are the owner) and send them to
our hypervisor. When requested to plug memory, we can replug such memory
using free_contig_range() after asking our hypervisor.
We also want to mark all allocated pages PG_offline, so nobody will
touch them. To differentiate pages that were never onlined when
onlining the memory block from pages allocated via alloc_contig_range(), we
use PageDirty(). Based on this flag, virtio_mem_fake_online() can either
online the pages for the first time or use free_contig_range().
It is worth noting that there are no guarantees on how much memory can
actually get unplugged again. All device memory might completely be
fragmented with unmovable data, such that no subblock can get unplugged.
We are not touching the ZONE_MOVABLE. If memory is onlined to the
ZONE_MOVABLE, it can only get unplugged after that memory was offlined
manually by user space. In normal operation, virtio-mem memory is
suggested to be onlined to ZONE_NORMAL. In the future, we will try to
make unplug more likely to succeed.
Add a module parameter to control if online memory shall be touched.
As we want to access alloc_contig_range()/free_contig_range() from
kernel module context, export the symbols.
Note: Whenever virtio-mem uses alloc_contig_range(), all affected pages
are on the same node, in the same zone, and contain no holes.
Acked-by: Michal Hocko <mhocko@suse.com> # to export contig range allocator API
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:29 +00:00
|
|
|
for (; nr_pages--; pfn++) {
|
|
|
|
struct page *page = pfn_to_page(pfn);
|
|
|
|
|
|
|
|
__ClearPageOffline(page);
|
|
|
|
if (!onlined)
|
|
|
|
ClearPageDirty(page);
|
|
|
|
}
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Release a range of fake-offline pages to the buddy, effectively
|
|
|
|
* fake-onlining them.
|
|
|
|
*/
|
|
|
|
static void virtio_mem_fake_online(unsigned long pfn, unsigned int nr_pages)
|
|
|
|
{
|
|
|
|
const int order = MAX_ORDER - 1;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We are always called with subblock granularity, which is at least
|
|
|
|
* aligned to MAX_ORDER - 1.
|
|
|
|
*/
|
virtio-mem: Paravirtualized memory hotunplug part 2
We also want to unplug online memory (contained in online memory blocks
and, therefore, managed by the buddy), and eventually replug it later.
When requested to unplug memory, we use alloc_contig_range() to allocate
subblocks in online memory blocks (so we are the owner) and send them to
our hypervisor. When requested to plug memory, we can replug such memory
using free_contig_range() after asking our hypervisor.
We also want to mark all allocated pages PG_offline, so nobody will
touch them. To differentiate pages that were never onlined when
onlining the memory block from pages allocated via alloc_contig_range(), we
use PageDirty(). Based on this flag, virtio_mem_fake_online() can either
online the pages for the first time or use free_contig_range().
It is worth noting that there are no guarantees on how much memory can
actually get unplugged again. All device memory might completely be
fragmented with unmovable data, such that no subblock can get unplugged.
We are not touching the ZONE_MOVABLE. If memory is onlined to the
ZONE_MOVABLE, it can only get unplugged after that memory was offlined
manually by user space. In normal operation, virtio-mem memory is
suggested to be onlined to ZONE_NORMAL. In the future, we will try to
make unplug more likely to succeed.
Add a module parameter to control if online memory shall be touched.
As we want to access alloc_contig_range()/free_contig_range() from
kernel module context, export the symbols.
Note: Whenever virtio-mem uses alloc_contig_range(), all affected pages
are on the same node, in the same zone, and contain no holes.
Acked-by: Michal Hocko <mhocko@suse.com> # to export contig range allocator API
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:29 +00:00
|
|
|
for (i = 0; i < nr_pages; i += 1 << order) {
|
|
|
|
struct page *page = pfn_to_page(pfn + i);
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
|
virtio-mem: Paravirtualized memory hotunplug part 2
We also want to unplug online memory (contained in online memory blocks
and, therefore, managed by the buddy), and eventually replug it later.
When requested to unplug memory, we use alloc_contig_range() to allocate
subblocks in online memory blocks (so we are the owner) and send them to
our hypervisor. When requested to plug memory, we can replug such memory
using free_contig_range() after asking our hypervisor.
We also want to mark all allocated pages PG_offline, so nobody will
touch them. To differentiate pages that were never onlined when
onlining the memory block from pages allocated via alloc_contig_range(), we
use PageDirty(). Based on this flag, virtio_mem_fake_online() can either
online the pages for the first time or use free_contig_range().
It is worth noting that there are no guarantees on how much memory can
actually get unplugged again. All device memory might completely be
fragmented with unmovable data, such that no subblock can get unplugged.
We are not touching the ZONE_MOVABLE. If memory is onlined to the
ZONE_MOVABLE, it can only get unplugged after that memory was offlined
manually by user space. In normal operation, virtio-mem memory is
suggested to be onlined to ZONE_NORMAL. In the future, we will try to
make unplug more likely to succeed.
Add a module parameter to control if online memory shall be touched.
As we want to access alloc_contig_range()/free_contig_range() from
kernel module context, export the symbols.
Note: Whenever virtio-mem uses alloc_contig_range(), all affected pages
are on the same node, in the same zone, and contain no holes.
Acked-by: Michal Hocko <mhocko@suse.com> # to export contig range allocator API
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:29 +00:00
|
|
|
/*
|
|
|
|
* If the page is PageDirty(), it was kept fake-offline when
|
|
|
|
* onlining the memory block. Otherwise, it was allocated
|
|
|
|
* using alloc_contig_range(). All pages in a subblock are
|
|
|
|
* alike.
|
|
|
|
*/
|
|
|
|
if (PageDirty(page)) {
|
|
|
|
virtio_mem_clear_fake_offline(pfn + i, 1 << order,
|
|
|
|
false);
|
|
|
|
generic_online_page(page, order);
|
|
|
|
} else {
|
|
|
|
virtio_mem_clear_fake_offline(pfn + i, 1 << order,
|
|
|
|
true);
|
|
|
|
free_contig_range(pfn + i, 1 << order);
|
|
|
|
adjust_managed_page_count(page, 1 << order);
|
|
|
|
}
|
|
|
|
}
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void virtio_mem_online_page_cb(struct page *page, unsigned int order)
|
|
|
|
{
|
|
|
|
const unsigned long addr = page_to_phys(page);
|
|
|
|
const unsigned long mb_id = virtio_mem_phys_to_mb_id(addr);
|
|
|
|
struct virtio_mem *vm;
|
|
|
|
int sb_id;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We exploit here that subblocks have at least MAX_ORDER - 1
|
|
|
|
* size/alignment and that this callback is is called with such a
|
|
|
|
* size/alignment. So we cannot cross subblocks and therefore
|
|
|
|
* also not memory blocks.
|
|
|
|
*/
|
|
|
|
rcu_read_lock();
|
|
|
|
list_for_each_entry_rcu(vm, &virtio_mem_devices, next) {
|
|
|
|
if (!virtio_mem_owned_mb(vm, mb_id))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
sb_id = virtio_mem_phys_to_sb_id(vm, addr);
|
|
|
|
/*
|
|
|
|
* If plugged, online the pages, otherwise, set them fake
|
|
|
|
* offline (PageOffline).
|
|
|
|
*/
|
|
|
|
if (virtio_mem_mb_test_sb_plugged(vm, mb_id, sb_id, 1))
|
|
|
|
generic_online_page(page, order);
|
|
|
|
else
|
virtio-mem: Paravirtualized memory hotunplug part 2
We also want to unplug online memory (contained in online memory blocks
and, therefore, managed by the buddy), and eventually replug it later.
When requested to unplug memory, we use alloc_contig_range() to allocate
subblocks in online memory blocks (so we are the owner) and send them to
our hypervisor. When requested to plug memory, we can replug such memory
using free_contig_range() after asking our hypervisor.
We also want to mark all allocated pages PG_offline, so nobody will
touch them. To differentiate pages that were never onlined when
onlining the memory block from pages allocated via alloc_contig_range(), we
use PageDirty(). Based on this flag, virtio_mem_fake_online() can either
online the pages for the first time or use free_contig_range().
It is worth noting that there are no guarantees on how much memory can
actually get unplugged again. All device memory might completely be
fragmented with unmovable data, such that no subblock can get unplugged.
We are not touching the ZONE_MOVABLE. If memory is onlined to the
ZONE_MOVABLE, it can only get unplugged after that memory was offlined
manually by user space. In normal operation, virtio-mem memory is
suggested to be onlined to ZONE_NORMAL. In the future, we will try to
make unplug more likely to succeed.
Add a module parameter to control if online memory shall be touched.
As we want to access alloc_contig_range()/free_contig_range() from
kernel module context, export the symbols.
Note: Whenever virtio-mem uses alloc_contig_range(), all affected pages
are on the same node, in the same zone, and contain no holes.
Acked-by: Michal Hocko <mhocko@suse.com> # to export contig range allocator API
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:29 +00:00
|
|
|
virtio_mem_set_fake_offline(PFN_DOWN(addr), 1 << order,
|
|
|
|
false);
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
rcu_read_unlock();
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
rcu_read_unlock();
|
|
|
|
|
|
|
|
/* not virtio-mem memory, but e.g., a DIMM. online it */
|
|
|
|
generic_online_page(page, order);
|
|
|
|
}
|
|
|
|
|
|
|
|
static uint64_t virtio_mem_send_request(struct virtio_mem *vm,
|
|
|
|
const struct virtio_mem_req *req)
|
|
|
|
{
|
|
|
|
struct scatterlist *sgs[2], sg_req, sg_resp;
|
|
|
|
unsigned int len;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
/* don't use the request residing on the stack (vaddr) */
|
|
|
|
vm->req = *req;
|
|
|
|
|
|
|
|
/* out: buffer for request */
|
|
|
|
sg_init_one(&sg_req, &vm->req, sizeof(vm->req));
|
|
|
|
sgs[0] = &sg_req;
|
|
|
|
|
|
|
|
/* in: buffer for response */
|
|
|
|
sg_init_one(&sg_resp, &vm->resp, sizeof(vm->resp));
|
|
|
|
sgs[1] = &sg_resp;
|
|
|
|
|
|
|
|
rc = virtqueue_add_sgs(vm->vq, sgs, 1, 1, vm, GFP_KERNEL);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
virtqueue_kick(vm->vq);
|
|
|
|
|
|
|
|
/* wait for a response */
|
|
|
|
wait_event(vm->host_resp, virtqueue_get_buf(vm->vq, &len));
|
|
|
|
|
|
|
|
return virtio16_to_cpu(vm->vdev, vm->resp.type);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int virtio_mem_send_plug_request(struct virtio_mem *vm, uint64_t addr,
|
|
|
|
uint64_t size)
|
|
|
|
{
|
|
|
|
const uint64_t nb_vm_blocks = size / vm->device_block_size;
|
|
|
|
const struct virtio_mem_req req = {
|
|
|
|
.type = cpu_to_virtio16(vm->vdev, VIRTIO_MEM_REQ_PLUG),
|
|
|
|
.u.plug.addr = cpu_to_virtio64(vm->vdev, addr),
|
|
|
|
.u.plug.nb_blocks = cpu_to_virtio16(vm->vdev, nb_vm_blocks),
|
|
|
|
};
|
|
|
|
|
|
|
|
if (atomic_read(&vm->config_changed))
|
|
|
|
return -EAGAIN;
|
|
|
|
|
|
|
|
switch (virtio_mem_send_request(vm, &req)) {
|
|
|
|
case VIRTIO_MEM_RESP_ACK:
|
|
|
|
vm->plugged_size += size;
|
|
|
|
return 0;
|
|
|
|
case VIRTIO_MEM_RESP_NACK:
|
|
|
|
return -EAGAIN;
|
|
|
|
case VIRTIO_MEM_RESP_BUSY:
|
|
|
|
return -EBUSY;
|
|
|
|
case VIRTIO_MEM_RESP_ERROR:
|
|
|
|
return -EINVAL;
|
|
|
|
default:
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int virtio_mem_send_unplug_request(struct virtio_mem *vm, uint64_t addr,
|
|
|
|
uint64_t size)
|
|
|
|
{
|
|
|
|
const uint64_t nb_vm_blocks = size / vm->device_block_size;
|
|
|
|
const struct virtio_mem_req req = {
|
|
|
|
.type = cpu_to_virtio16(vm->vdev, VIRTIO_MEM_REQ_UNPLUG),
|
|
|
|
.u.unplug.addr = cpu_to_virtio64(vm->vdev, addr),
|
|
|
|
.u.unplug.nb_blocks = cpu_to_virtio16(vm->vdev, nb_vm_blocks),
|
|
|
|
};
|
|
|
|
|
|
|
|
if (atomic_read(&vm->config_changed))
|
|
|
|
return -EAGAIN;
|
|
|
|
|
|
|
|
switch (virtio_mem_send_request(vm, &req)) {
|
|
|
|
case VIRTIO_MEM_RESP_ACK:
|
|
|
|
vm->plugged_size -= size;
|
|
|
|
return 0;
|
|
|
|
case VIRTIO_MEM_RESP_BUSY:
|
|
|
|
return -EBUSY;
|
|
|
|
case VIRTIO_MEM_RESP_ERROR:
|
|
|
|
return -EINVAL;
|
|
|
|
default:
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int virtio_mem_send_unplug_all_request(struct virtio_mem *vm)
|
|
|
|
{
|
|
|
|
const struct virtio_mem_req req = {
|
|
|
|
.type = cpu_to_virtio16(vm->vdev, VIRTIO_MEM_REQ_UNPLUG_ALL),
|
|
|
|
};
|
|
|
|
|
|
|
|
switch (virtio_mem_send_request(vm, &req)) {
|
|
|
|
case VIRTIO_MEM_RESP_ACK:
|
|
|
|
vm->unplug_all_required = false;
|
|
|
|
vm->plugged_size = 0;
|
|
|
|
/* usable region might have shrunk */
|
|
|
|
atomic_set(&vm->config_changed, 1);
|
|
|
|
return 0;
|
|
|
|
case VIRTIO_MEM_RESP_BUSY:
|
|
|
|
return -EBUSY;
|
|
|
|
default:
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Plug selected subblocks. Updates the plugged state, but not the state
|
|
|
|
* of the memory block.
|
|
|
|
*/
|
|
|
|
static int virtio_mem_mb_plug_sb(struct virtio_mem *vm, unsigned long mb_id,
|
|
|
|
int sb_id, int count)
|
|
|
|
{
|
|
|
|
const uint64_t addr = virtio_mem_mb_id_to_phys(mb_id) +
|
|
|
|
sb_id * vm->subblock_size;
|
|
|
|
const uint64_t size = count * vm->subblock_size;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
dev_dbg(&vm->vdev->dev, "plugging memory block: %lu : %i - %i\n", mb_id,
|
|
|
|
sb_id, sb_id + count - 1);
|
|
|
|
|
|
|
|
rc = virtio_mem_send_plug_request(vm, addr, size);
|
|
|
|
if (!rc)
|
|
|
|
virtio_mem_mb_set_sb_plugged(vm, mb_id, sb_id, count);
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Unplug selected subblocks. Updates the plugged state, but not the state
|
|
|
|
* of the memory block.
|
|
|
|
*/
|
|
|
|
static int virtio_mem_mb_unplug_sb(struct virtio_mem *vm, unsigned long mb_id,
|
|
|
|
int sb_id, int count)
|
|
|
|
{
|
|
|
|
const uint64_t addr = virtio_mem_mb_id_to_phys(mb_id) +
|
|
|
|
sb_id * vm->subblock_size;
|
|
|
|
const uint64_t size = count * vm->subblock_size;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
dev_dbg(&vm->vdev->dev, "unplugging memory block: %lu : %i - %i\n",
|
|
|
|
mb_id, sb_id, sb_id + count - 1);
|
|
|
|
|
|
|
|
rc = virtio_mem_send_unplug_request(vm, addr, size);
|
|
|
|
if (!rc)
|
|
|
|
virtio_mem_mb_set_sb_unplugged(vm, mb_id, sb_id, count);
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Unplug the desired number of plugged subblocks of a offline or not-added
|
|
|
|
* memory block. Will fail if any subblock cannot get unplugged (instead of
|
|
|
|
* skipping it).
|
|
|
|
*
|
|
|
|
* Will not modify the state of the memory block.
|
|
|
|
*
|
|
|
|
* Note: can fail after some subblocks were unplugged.
|
|
|
|
*/
|
|
|
|
static int virtio_mem_mb_unplug_any_sb(struct virtio_mem *vm,
|
|
|
|
unsigned long mb_id, uint64_t *nb_sb)
|
|
|
|
{
|
|
|
|
int sb_id, count;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
while (*nb_sb) {
|
|
|
|
sb_id = virtio_mem_mb_first_plugged_sb(vm, mb_id);
|
|
|
|
if (sb_id >= vm->nb_sb_per_mb)
|
|
|
|
break;
|
|
|
|
count = 1;
|
|
|
|
while (count < *nb_sb &&
|
|
|
|
sb_id + count < vm->nb_sb_per_mb &&
|
|
|
|
virtio_mem_mb_test_sb_plugged(vm, mb_id, sb_id + count,
|
|
|
|
1))
|
|
|
|
count++;
|
|
|
|
|
|
|
|
rc = virtio_mem_mb_unplug_sb(vm, mb_id, sb_id, count);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
*nb_sb -= count;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Unplug all plugged subblocks of an offline or not-added memory block.
|
|
|
|
*
|
|
|
|
* Will not modify the state of the memory block.
|
|
|
|
*
|
|
|
|
* Note: can fail after some subblocks were unplugged.
|
|
|
|
*/
|
|
|
|
static int virtio_mem_mb_unplug(struct virtio_mem *vm, unsigned long mb_id)
|
|
|
|
{
|
|
|
|
uint64_t nb_sb = vm->nb_sb_per_mb;
|
|
|
|
|
|
|
|
return virtio_mem_mb_unplug_any_sb(vm, mb_id, &nb_sb);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Prepare tracking data for the next memory block.
|
|
|
|
*/
|
|
|
|
static int virtio_mem_prepare_next_mb(struct virtio_mem *vm,
|
|
|
|
unsigned long *mb_id)
|
|
|
|
{
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
if (vm->next_mb_id > vm->last_usable_mb_id)
|
|
|
|
return -ENOSPC;
|
|
|
|
|
|
|
|
/* Resize the state array if required. */
|
|
|
|
rc = virtio_mem_mb_state_prepare_next_mb(vm);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
/* Resize the subblock bitmap if required. */
|
|
|
|
rc = virtio_mem_sb_bitmap_prepare_next_mb(vm);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
vm->nb_mb_state[VIRTIO_MEM_MB_STATE_UNUSED]++;
|
|
|
|
*mb_id = vm->next_mb_id++;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Don't add too many blocks that are not onlined yet to avoid running OOM.
|
|
|
|
*/
|
|
|
|
static bool virtio_mem_too_many_mb_offline(struct virtio_mem *vm)
|
|
|
|
{
|
|
|
|
unsigned long nb_offline;
|
|
|
|
|
|
|
|
nb_offline = vm->nb_mb_state[VIRTIO_MEM_MB_STATE_OFFLINE] +
|
|
|
|
vm->nb_mb_state[VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL];
|
|
|
|
return nb_offline >= VIRTIO_MEM_NB_OFFLINE_THRESHOLD;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Try to plug the desired number of subblocks and add the memory block
|
|
|
|
* to Linux.
|
|
|
|
*
|
|
|
|
* Will modify the state of the memory block.
|
|
|
|
*/
|
|
|
|
static int virtio_mem_mb_plug_and_add(struct virtio_mem *vm,
|
|
|
|
unsigned long mb_id,
|
|
|
|
uint64_t *nb_sb)
|
|
|
|
{
|
|
|
|
const int count = min_t(int, *nb_sb, vm->nb_sb_per_mb);
|
|
|
|
int rc, rc2;
|
|
|
|
|
|
|
|
if (WARN_ON_ONCE(!count))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Plug the requested number of subblocks before adding it to linux,
|
|
|
|
* so that onlining will directly online all plugged subblocks.
|
|
|
|
*/
|
|
|
|
rc = virtio_mem_mb_plug_sb(vm, mb_id, 0, count);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Mark the block properly offline before adding it to Linux,
|
|
|
|
* so the memory notifiers will find the block in the right state.
|
|
|
|
*/
|
|
|
|
if (count == vm->nb_sb_per_mb)
|
|
|
|
virtio_mem_mb_set_state(vm, mb_id,
|
|
|
|
VIRTIO_MEM_MB_STATE_OFFLINE);
|
|
|
|
else
|
|
|
|
virtio_mem_mb_set_state(vm, mb_id,
|
|
|
|
VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL);
|
|
|
|
|
|
|
|
/* Add the memory block to linux - if that fails, try to unplug. */
|
|
|
|
rc = virtio_mem_mb_add(vm, mb_id);
|
|
|
|
if (rc) {
|
|
|
|
enum virtio_mem_mb_state new_state = VIRTIO_MEM_MB_STATE_UNUSED;
|
|
|
|
|
|
|
|
dev_err(&vm->vdev->dev,
|
|
|
|
"adding memory block %lu failed with %d\n", mb_id, rc);
|
|
|
|
rc2 = virtio_mem_mb_unplug_sb(vm, mb_id, 0, count);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* TODO: Linux MM does not properly clean up yet in all cases
|
|
|
|
* where adding of memory failed - especially on -ENOMEM.
|
|
|
|
*/
|
|
|
|
if (rc2)
|
|
|
|
new_state = VIRTIO_MEM_MB_STATE_PLUGGED;
|
|
|
|
virtio_mem_mb_set_state(vm, mb_id, new_state);
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
*nb_sb -= count;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Try to plug the desired number of subblocks of a memory block that
|
|
|
|
* is already added to Linux.
|
|
|
|
*
|
|
|
|
* Will modify the state of the memory block.
|
|
|
|
*
|
|
|
|
* Note: Can fail after some subblocks were successfully plugged.
|
|
|
|
*/
|
|
|
|
static int virtio_mem_mb_plug_any_sb(struct virtio_mem *vm, unsigned long mb_id,
|
|
|
|
uint64_t *nb_sb, bool online)
|
|
|
|
{
|
|
|
|
unsigned long pfn, nr_pages;
|
|
|
|
int sb_id, count;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
if (WARN_ON_ONCE(!*nb_sb))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
while (*nb_sb) {
|
|
|
|
sb_id = virtio_mem_mb_first_unplugged_sb(vm, mb_id);
|
|
|
|
if (sb_id >= vm->nb_sb_per_mb)
|
|
|
|
break;
|
|
|
|
count = 1;
|
|
|
|
while (count < *nb_sb &&
|
|
|
|
sb_id + count < vm->nb_sb_per_mb &&
|
|
|
|
!virtio_mem_mb_test_sb_plugged(vm, mb_id, sb_id + count,
|
|
|
|
1))
|
|
|
|
count++;
|
|
|
|
|
|
|
|
rc = virtio_mem_mb_plug_sb(vm, mb_id, sb_id, count);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
*nb_sb -= count;
|
|
|
|
if (!online)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
/* fake-online the pages if the memory block is online */
|
|
|
|
pfn = PFN_DOWN(virtio_mem_mb_id_to_phys(mb_id) +
|
|
|
|
sb_id * vm->subblock_size);
|
|
|
|
nr_pages = PFN_DOWN(count * vm->subblock_size);
|
|
|
|
virtio_mem_fake_online(pfn, nr_pages);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (virtio_mem_mb_test_sb_plugged(vm, mb_id, 0, vm->nb_sb_per_mb)) {
|
|
|
|
if (online)
|
|
|
|
virtio_mem_mb_set_state(vm, mb_id,
|
|
|
|
VIRTIO_MEM_MB_STATE_ONLINE);
|
|
|
|
else
|
|
|
|
virtio_mem_mb_set_state(vm, mb_id,
|
|
|
|
VIRTIO_MEM_MB_STATE_OFFLINE);
|
|
|
|
}
|
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Try to plug the requested amount of memory.
|
|
|
|
*/
|
|
|
|
static int virtio_mem_plug_request(struct virtio_mem *vm, uint64_t diff)
|
|
|
|
{
|
|
|
|
uint64_t nb_sb = diff / vm->subblock_size;
|
|
|
|
unsigned long mb_id;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
if (!nb_sb)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
/* Don't race with onlining/offlining */
|
|
|
|
mutex_lock(&vm->hotplug_mutex);
|
|
|
|
|
|
|
|
/* Try to plug subblocks of partially plugged online blocks. */
|
|
|
|
virtio_mem_for_each_mb_state(vm, mb_id,
|
|
|
|
VIRTIO_MEM_MB_STATE_ONLINE_PARTIAL) {
|
|
|
|
rc = virtio_mem_mb_plug_any_sb(vm, mb_id, &nb_sb, true);
|
|
|
|
if (rc || !nb_sb)
|
|
|
|
goto out_unlock;
|
|
|
|
cond_resched();
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Try to plug subblocks of partially plugged offline blocks. */
|
|
|
|
virtio_mem_for_each_mb_state(vm, mb_id,
|
|
|
|
VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL) {
|
|
|
|
rc = virtio_mem_mb_plug_any_sb(vm, mb_id, &nb_sb, false);
|
|
|
|
if (rc || !nb_sb)
|
|
|
|
goto out_unlock;
|
|
|
|
cond_resched();
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We won't be working on online/offline memory blocks from this point,
|
|
|
|
* so we can't race with memory onlining/offlining. Drop the mutex.
|
|
|
|
*/
|
|
|
|
mutex_unlock(&vm->hotplug_mutex);
|
|
|
|
|
|
|
|
/* Try to plug and add unused blocks */
|
|
|
|
virtio_mem_for_each_mb_state(vm, mb_id, VIRTIO_MEM_MB_STATE_UNUSED) {
|
|
|
|
if (virtio_mem_too_many_mb_offline(vm))
|
|
|
|
return -ENOSPC;
|
|
|
|
|
|
|
|
rc = virtio_mem_mb_plug_and_add(vm, mb_id, &nb_sb);
|
|
|
|
if (rc || !nb_sb)
|
|
|
|
return rc;
|
|
|
|
cond_resched();
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Try to prepare, plug and add new blocks */
|
|
|
|
while (nb_sb) {
|
|
|
|
if (virtio_mem_too_many_mb_offline(vm))
|
|
|
|
return -ENOSPC;
|
|
|
|
|
|
|
|
rc = virtio_mem_prepare_next_mb(vm, &mb_id);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
rc = virtio_mem_mb_plug_and_add(vm, mb_id, &nb_sb);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
cond_resched();
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
out_unlock:
|
|
|
|
mutex_unlock(&vm->hotplug_mutex);
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
2020-05-07 14:01:28 +00:00
|
|
|
/*
|
|
|
|
* Unplug the desired number of plugged subblocks of an offline memory block.
|
|
|
|
* Will fail if any subblock cannot get unplugged (instead of skipping it).
|
|
|
|
*
|
|
|
|
* Will modify the state of the memory block. Might temporarily drop the
|
|
|
|
* hotplug_mutex.
|
|
|
|
*
|
|
|
|
* Note: Can fail after some subblocks were successfully unplugged.
|
|
|
|
*/
|
|
|
|
static int virtio_mem_mb_unplug_any_sb_offline(struct virtio_mem *vm,
|
|
|
|
unsigned long mb_id,
|
|
|
|
uint64_t *nb_sb)
|
|
|
|
{
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
rc = virtio_mem_mb_unplug_any_sb(vm, mb_id, nb_sb);
|
|
|
|
|
|
|
|
/* some subblocks might have been unplugged even on failure */
|
|
|
|
if (!virtio_mem_mb_test_sb_plugged(vm, mb_id, 0, vm->nb_sb_per_mb))
|
|
|
|
virtio_mem_mb_set_state(vm, mb_id,
|
|
|
|
VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
if (virtio_mem_mb_test_sb_unplugged(vm, mb_id, 0, vm->nb_sb_per_mb)) {
|
|
|
|
/*
|
|
|
|
* Remove the block from Linux - this should never fail.
|
|
|
|
* Hinder the block from getting onlined by marking it
|
|
|
|
* unplugged. Temporarily drop the mutex, so
|
|
|
|
* any pending GOING_ONLINE requests can be serviced/rejected.
|
|
|
|
*/
|
|
|
|
virtio_mem_mb_set_state(vm, mb_id,
|
|
|
|
VIRTIO_MEM_MB_STATE_UNUSED);
|
|
|
|
|
|
|
|
mutex_unlock(&vm->hotplug_mutex);
|
|
|
|
rc = virtio_mem_mb_remove(vm, mb_id);
|
|
|
|
BUG_ON(rc);
|
|
|
|
mutex_lock(&vm->hotplug_mutex);
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
virtio-mem: Paravirtualized memory hotunplug part 2
We also want to unplug online memory (contained in online memory blocks
and, therefore, managed by the buddy), and eventually replug it later.
When requested to unplug memory, we use alloc_contig_range() to allocate
subblocks in online memory blocks (so we are the owner) and send them to
our hypervisor. When requested to plug memory, we can replug such memory
using free_contig_range() after asking our hypervisor.
We also want to mark all allocated pages PG_offline, so nobody will
touch them. To differentiate pages that were never onlined when
onlining the memory block from pages allocated via alloc_contig_range(), we
use PageDirty(). Based on this flag, virtio_mem_fake_online() can either
online the pages for the first time or use free_contig_range().
It is worth noting that there are no guarantees on how much memory can
actually get unplugged again. All device memory might completely be
fragmented with unmovable data, such that no subblock can get unplugged.
We are not touching the ZONE_MOVABLE. If memory is onlined to the
ZONE_MOVABLE, it can only get unplugged after that memory was offlined
manually by user space. In normal operation, virtio-mem memory is
suggested to be onlined to ZONE_NORMAL. In the future, we will try to
make unplug more likely to succeed.
Add a module parameter to control if online memory shall be touched.
As we want to access alloc_contig_range()/free_contig_range() from
kernel module context, export the symbols.
Note: Whenever virtio-mem uses alloc_contig_range(), all affected pages
are on the same node, in the same zone, and contain no holes.
Acked-by: Michal Hocko <mhocko@suse.com> # to export contig range allocator API
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:29 +00:00
|
|
|
/*
|
|
|
|
* Unplug the desired number of plugged subblocks of an online memory block.
|
|
|
|
* Will skip subblock that are busy.
|
|
|
|
*
|
2020-05-07 14:01:33 +00:00
|
|
|
* Will modify the state of the memory block. Might temporarily drop the
|
|
|
|
* hotplug_mutex.
|
virtio-mem: Paravirtualized memory hotunplug part 2
We also want to unplug online memory (contained in online memory blocks
and, therefore, managed by the buddy), and eventually replug it later.
When requested to unplug memory, we use alloc_contig_range() to allocate
subblocks in online memory blocks (so we are the owner) and send them to
our hypervisor. When requested to plug memory, we can replug such memory
using free_contig_range() after asking our hypervisor.
We also want to mark all allocated pages PG_offline, so nobody will
touch them. To differentiate pages that were never onlined when
onlining the memory block from pages allocated via alloc_contig_range(), we
use PageDirty(). Based on this flag, virtio_mem_fake_online() can either
online the pages for the first time or use free_contig_range().
It is worth noting that there are no guarantees on how much memory can
actually get unplugged again. All device memory might completely be
fragmented with unmovable data, such that no subblock can get unplugged.
We are not touching the ZONE_MOVABLE. If memory is onlined to the
ZONE_MOVABLE, it can only get unplugged after that memory was offlined
manually by user space. In normal operation, virtio-mem memory is
suggested to be onlined to ZONE_NORMAL. In the future, we will try to
make unplug more likely to succeed.
Add a module parameter to control if online memory shall be touched.
As we want to access alloc_contig_range()/free_contig_range() from
kernel module context, export the symbols.
Note: Whenever virtio-mem uses alloc_contig_range(), all affected pages
are on the same node, in the same zone, and contain no holes.
Acked-by: Michal Hocko <mhocko@suse.com> # to export contig range allocator API
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:29 +00:00
|
|
|
*
|
|
|
|
* Note: Can fail after some subblocks were successfully unplugged. Can
|
|
|
|
* return 0 even if subblocks were busy and could not get unplugged.
|
|
|
|
*/
|
|
|
|
static int virtio_mem_mb_unplug_any_sb_online(struct virtio_mem *vm,
|
|
|
|
unsigned long mb_id,
|
|
|
|
uint64_t *nb_sb)
|
|
|
|
{
|
|
|
|
const unsigned long nr_pages = PFN_DOWN(vm->subblock_size);
|
|
|
|
unsigned long start_pfn;
|
|
|
|
int rc, sb_id;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* TODO: To increase the performance we want to try bigger, consecutive
|
|
|
|
* subblocks first before falling back to single subblocks. Also,
|
|
|
|
* we should sense via something like is_mem_section_removable()
|
|
|
|
* first if it makes sense to go ahead any try to allocate.
|
|
|
|
*/
|
|
|
|
for (sb_id = 0; sb_id < vm->nb_sb_per_mb && *nb_sb; sb_id++) {
|
|
|
|
/* Find the next candidate subblock */
|
|
|
|
while (sb_id < vm->nb_sb_per_mb &&
|
|
|
|
!virtio_mem_mb_test_sb_plugged(vm, mb_id, sb_id, 1))
|
|
|
|
sb_id++;
|
|
|
|
if (sb_id >= vm->nb_sb_per_mb)
|
|
|
|
break;
|
|
|
|
|
|
|
|
start_pfn = PFN_DOWN(virtio_mem_mb_id_to_phys(mb_id) +
|
|
|
|
sb_id * vm->subblock_size);
|
|
|
|
rc = alloc_contig_range(start_pfn, start_pfn + nr_pages,
|
|
|
|
MIGRATE_MOVABLE, GFP_KERNEL);
|
|
|
|
if (rc == -ENOMEM)
|
|
|
|
/* whoops, out of memory */
|
|
|
|
return rc;
|
|
|
|
if (rc)
|
|
|
|
/* memory busy, we can't unplug this chunk */
|
|
|
|
continue;
|
|
|
|
|
|
|
|
/* Mark it as fake-offline before unplugging it */
|
|
|
|
virtio_mem_set_fake_offline(start_pfn, nr_pages, true);
|
|
|
|
adjust_managed_page_count(pfn_to_page(start_pfn), -nr_pages);
|
|
|
|
|
|
|
|
/* Try to unplug the allocated memory */
|
|
|
|
rc = virtio_mem_mb_unplug_sb(vm, mb_id, sb_id, 1);
|
|
|
|
if (rc) {
|
|
|
|
/* Return the memory to the buddy. */
|
|
|
|
virtio_mem_fake_online(start_pfn, nr_pages);
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
virtio_mem_mb_set_state(vm, mb_id,
|
|
|
|
VIRTIO_MEM_MB_STATE_ONLINE_PARTIAL);
|
|
|
|
*nb_sb -= 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
2020-05-07 14:01:33 +00:00
|
|
|
* Once all subblocks of a memory block were unplugged, offline and
|
|
|
|
* remove it. This will usually not fail, as no memory is in use
|
|
|
|
* anymore - however some other notifiers might NACK the request.
|
virtio-mem: Paravirtualized memory hotunplug part 2
We also want to unplug online memory (contained in online memory blocks
and, therefore, managed by the buddy), and eventually replug it later.
When requested to unplug memory, we use alloc_contig_range() to allocate
subblocks in online memory blocks (so we are the owner) and send them to
our hypervisor. When requested to plug memory, we can replug such memory
using free_contig_range() after asking our hypervisor.
We also want to mark all allocated pages PG_offline, so nobody will
touch them. To differentiate pages that were never onlined when
onlining the memory block from pages allocated via alloc_contig_range(), we
use PageDirty(). Based on this flag, virtio_mem_fake_online() can either
online the pages for the first time or use free_contig_range().
It is worth noting that there are no guarantees on how much memory can
actually get unplugged again. All device memory might completely be
fragmented with unmovable data, such that no subblock can get unplugged.
We are not touching the ZONE_MOVABLE. If memory is onlined to the
ZONE_MOVABLE, it can only get unplugged after that memory was offlined
manually by user space. In normal operation, virtio-mem memory is
suggested to be onlined to ZONE_NORMAL. In the future, we will try to
make unplug more likely to succeed.
Add a module parameter to control if online memory shall be touched.
As we want to access alloc_contig_range()/free_contig_range() from
kernel module context, export the symbols.
Note: Whenever virtio-mem uses alloc_contig_range(), all affected pages
are on the same node, in the same zone, and contain no holes.
Acked-by: Michal Hocko <mhocko@suse.com> # to export contig range allocator API
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:29 +00:00
|
|
|
*/
|
2020-05-07 14:01:33 +00:00
|
|
|
if (virtio_mem_mb_test_sb_unplugged(vm, mb_id, 0, vm->nb_sb_per_mb)) {
|
|
|
|
mutex_unlock(&vm->hotplug_mutex);
|
|
|
|
rc = virtio_mem_mb_offline_and_remove(vm, mb_id);
|
|
|
|
mutex_lock(&vm->hotplug_mutex);
|
|
|
|
if (!rc)
|
|
|
|
virtio_mem_mb_set_state(vm, mb_id,
|
|
|
|
VIRTIO_MEM_MB_STATE_UNUSED);
|
|
|
|
}
|
|
|
|
|
virtio-mem: Paravirtualized memory hotunplug part 2
We also want to unplug online memory (contained in online memory blocks
and, therefore, managed by the buddy), and eventually replug it later.
When requested to unplug memory, we use alloc_contig_range() to allocate
subblocks in online memory blocks (so we are the owner) and send them to
our hypervisor. When requested to plug memory, we can replug such memory
using free_contig_range() after asking our hypervisor.
We also want to mark all allocated pages PG_offline, so nobody will
touch them. To differentiate pages that were never onlined when
onlining the memory block from pages allocated via alloc_contig_range(), we
use PageDirty(). Based on this flag, virtio_mem_fake_online() can either
online the pages for the first time or use free_contig_range().
It is worth noting that there are no guarantees on how much memory can
actually get unplugged again. All device memory might completely be
fragmented with unmovable data, such that no subblock can get unplugged.
We are not touching the ZONE_MOVABLE. If memory is onlined to the
ZONE_MOVABLE, it can only get unplugged after that memory was offlined
manually by user space. In normal operation, virtio-mem memory is
suggested to be onlined to ZONE_NORMAL. In the future, we will try to
make unplug more likely to succeed.
Add a module parameter to control if online memory shall be touched.
As we want to access alloc_contig_range()/free_contig_range() from
kernel module context, export the symbols.
Note: Whenever virtio-mem uses alloc_contig_range(), all affected pages
are on the same node, in the same zone, and contain no holes.
Acked-by: Michal Hocko <mhocko@suse.com> # to export contig range allocator API
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:29 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2020-05-07 14:01:28 +00:00
|
|
|
/*
|
|
|
|
* Try to unplug the requested amount of memory.
|
|
|
|
*/
|
|
|
|
static int virtio_mem_unplug_request(struct virtio_mem *vm, uint64_t diff)
|
|
|
|
{
|
|
|
|
uint64_t nb_sb = diff / vm->subblock_size;
|
|
|
|
unsigned long mb_id;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
if (!nb_sb)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We'll drop the mutex a couple of times when it is safe to do so.
|
|
|
|
* This might result in some blocks switching the state (online/offline)
|
|
|
|
* and we could miss them in this run - we will retry again later.
|
|
|
|
*/
|
|
|
|
mutex_lock(&vm->hotplug_mutex);
|
|
|
|
|
|
|
|
/* Try to unplug subblocks of partially plugged offline blocks. */
|
|
|
|
virtio_mem_for_each_mb_state_rev(vm, mb_id,
|
|
|
|
VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL) {
|
|
|
|
rc = virtio_mem_mb_unplug_any_sb_offline(vm, mb_id,
|
|
|
|
&nb_sb);
|
|
|
|
if (rc || !nb_sb)
|
|
|
|
goto out_unlock;
|
|
|
|
cond_resched();
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Try to unplug subblocks of plugged offline blocks. */
|
|
|
|
virtio_mem_for_each_mb_state_rev(vm, mb_id,
|
|
|
|
VIRTIO_MEM_MB_STATE_OFFLINE) {
|
|
|
|
rc = virtio_mem_mb_unplug_any_sb_offline(vm, mb_id,
|
|
|
|
&nb_sb);
|
|
|
|
if (rc || !nb_sb)
|
|
|
|
goto out_unlock;
|
|
|
|
cond_resched();
|
|
|
|
}
|
|
|
|
|
virtio-mem: Paravirtualized memory hotunplug part 2
We also want to unplug online memory (contained in online memory blocks
and, therefore, managed by the buddy), and eventually replug it later.
When requested to unplug memory, we use alloc_contig_range() to allocate
subblocks in online memory blocks (so we are the owner) and send them to
our hypervisor. When requested to plug memory, we can replug such memory
using free_contig_range() after asking our hypervisor.
We also want to mark all allocated pages PG_offline, so nobody will
touch them. To differentiate pages that were never onlined when
onlining the memory block from pages allocated via alloc_contig_range(), we
use PageDirty(). Based on this flag, virtio_mem_fake_online() can either
online the pages for the first time or use free_contig_range().
It is worth noting that there are no guarantees on how much memory can
actually get unplugged again. All device memory might completely be
fragmented with unmovable data, such that no subblock can get unplugged.
We are not touching the ZONE_MOVABLE. If memory is onlined to the
ZONE_MOVABLE, it can only get unplugged after that memory was offlined
manually by user space. In normal operation, virtio-mem memory is
suggested to be onlined to ZONE_NORMAL. In the future, we will try to
make unplug more likely to succeed.
Add a module parameter to control if online memory shall be touched.
As we want to access alloc_contig_range()/free_contig_range() from
kernel module context, export the symbols.
Note: Whenever virtio-mem uses alloc_contig_range(), all affected pages
are on the same node, in the same zone, and contain no holes.
Acked-by: Michal Hocko <mhocko@suse.com> # to export contig range allocator API
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:29 +00:00
|
|
|
if (!unplug_online) {
|
|
|
|
mutex_unlock(&vm->hotplug_mutex);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Try to unplug subblocks of partially plugged online blocks. */
|
|
|
|
virtio_mem_for_each_mb_state_rev(vm, mb_id,
|
|
|
|
VIRTIO_MEM_MB_STATE_ONLINE_PARTIAL) {
|
|
|
|
rc = virtio_mem_mb_unplug_any_sb_online(vm, mb_id,
|
|
|
|
&nb_sb);
|
|
|
|
if (rc || !nb_sb)
|
|
|
|
goto out_unlock;
|
|
|
|
mutex_unlock(&vm->hotplug_mutex);
|
|
|
|
cond_resched();
|
|
|
|
mutex_lock(&vm->hotplug_mutex);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Try to unplug subblocks of plugged online blocks. */
|
|
|
|
virtio_mem_for_each_mb_state_rev(vm, mb_id,
|
|
|
|
VIRTIO_MEM_MB_STATE_ONLINE) {
|
|
|
|
rc = virtio_mem_mb_unplug_any_sb_online(vm, mb_id,
|
|
|
|
&nb_sb);
|
|
|
|
if (rc || !nb_sb)
|
|
|
|
goto out_unlock;
|
|
|
|
mutex_unlock(&vm->hotplug_mutex);
|
|
|
|
cond_resched();
|
|
|
|
mutex_lock(&vm->hotplug_mutex);
|
|
|
|
}
|
|
|
|
|
2020-05-07 14:01:28 +00:00
|
|
|
mutex_unlock(&vm->hotplug_mutex);
|
virtio-mem: Paravirtualized memory hotunplug part 2
We also want to unplug online memory (contained in online memory blocks
and, therefore, managed by the buddy), and eventually replug it later.
When requested to unplug memory, we use alloc_contig_range() to allocate
subblocks in online memory blocks (so we are the owner) and send them to
our hypervisor. When requested to plug memory, we can replug such memory
using free_contig_range() after asking our hypervisor.
We also want to mark all allocated pages PG_offline, so nobody will
touch them. To differentiate pages that were never onlined when
onlining the memory block from pages allocated via alloc_contig_range(), we
use PageDirty(). Based on this flag, virtio_mem_fake_online() can either
online the pages for the first time or use free_contig_range().
It is worth noting that there are no guarantees on how much memory can
actually get unplugged again. All device memory might completely be
fragmented with unmovable data, such that no subblock can get unplugged.
We are not touching the ZONE_MOVABLE. If memory is onlined to the
ZONE_MOVABLE, it can only get unplugged after that memory was offlined
manually by user space. In normal operation, virtio-mem memory is
suggested to be onlined to ZONE_NORMAL. In the future, we will try to
make unplug more likely to succeed.
Add a module parameter to control if online memory shall be touched.
As we want to access alloc_contig_range()/free_contig_range() from
kernel module context, export the symbols.
Note: Whenever virtio-mem uses alloc_contig_range(), all affected pages
are on the same node, in the same zone, and contain no holes.
Acked-by: Michal Hocko <mhocko@suse.com> # to export contig range allocator API
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:29 +00:00
|
|
|
return nb_sb ? -EBUSY : 0;
|
2020-05-07 14:01:28 +00:00
|
|
|
out_unlock:
|
|
|
|
mutex_unlock(&vm->hotplug_mutex);
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
/*
|
|
|
|
* Try to unplug all blocks that couldn't be unplugged before, for example,
|
|
|
|
* because the hypervisor was busy.
|
|
|
|
*/
|
|
|
|
static int virtio_mem_unplug_pending_mb(struct virtio_mem *vm)
|
|
|
|
{
|
|
|
|
unsigned long mb_id;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
virtio_mem_for_each_mb_state(vm, mb_id, VIRTIO_MEM_MB_STATE_PLUGGED) {
|
|
|
|
rc = virtio_mem_mb_unplug(vm, mb_id);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
virtio_mem_mb_set_state(vm, mb_id, VIRTIO_MEM_MB_STATE_UNUSED);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Update all parts of the config that could have changed.
|
|
|
|
*/
|
|
|
|
static void virtio_mem_refresh_config(struct virtio_mem *vm)
|
|
|
|
{
|
|
|
|
const uint64_t phys_limit = 1UL << MAX_PHYSMEM_BITS;
|
|
|
|
uint64_t new_plugged_size, usable_region_size, end_addr;
|
|
|
|
|
|
|
|
/* the plugged_size is just a reflection of what _we_ did previously */
|
|
|
|
virtio_cread(vm->vdev, struct virtio_mem_config, plugged_size,
|
|
|
|
&new_plugged_size);
|
|
|
|
if (WARN_ON_ONCE(new_plugged_size != vm->plugged_size))
|
|
|
|
vm->plugged_size = new_plugged_size;
|
|
|
|
|
|
|
|
/* calculate the last usable memory block id */
|
|
|
|
virtio_cread(vm->vdev, struct virtio_mem_config,
|
|
|
|
usable_region_size, &usable_region_size);
|
|
|
|
end_addr = vm->addr + usable_region_size;
|
|
|
|
end_addr = min(end_addr, phys_limit);
|
|
|
|
vm->last_usable_mb_id = virtio_mem_phys_to_mb_id(end_addr) - 1;
|
|
|
|
|
|
|
|
/* see if there is a request to change the size */
|
|
|
|
virtio_cread(vm->vdev, struct virtio_mem_config, requested_size,
|
|
|
|
&vm->requested_size);
|
|
|
|
|
|
|
|
dev_info(&vm->vdev->dev, "plugged size: 0x%llx", vm->plugged_size);
|
|
|
|
dev_info(&vm->vdev->dev, "requested size: 0x%llx", vm->requested_size);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Workqueue function for handling plug/unplug requests and config updates.
|
|
|
|
*/
|
|
|
|
static void virtio_mem_run_wq(struct work_struct *work)
|
|
|
|
{
|
|
|
|
struct virtio_mem *vm = container_of(work, struct virtio_mem, wq);
|
|
|
|
uint64_t diff;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
hrtimer_cancel(&vm->retry_timer);
|
|
|
|
|
|
|
|
if (vm->broken)
|
|
|
|
return;
|
|
|
|
|
|
|
|
retry:
|
|
|
|
rc = 0;
|
|
|
|
|
|
|
|
/* Make sure we start with a clean state if there are leftovers. */
|
|
|
|
if (unlikely(vm->unplug_all_required))
|
|
|
|
rc = virtio_mem_send_unplug_all_request(vm);
|
|
|
|
|
|
|
|
if (atomic_read(&vm->config_changed)) {
|
|
|
|
atomic_set(&vm->config_changed, 0);
|
|
|
|
virtio_mem_refresh_config(vm);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Unplug any leftovers from previous runs */
|
|
|
|
if (!rc)
|
|
|
|
rc = virtio_mem_unplug_pending_mb(vm);
|
|
|
|
|
|
|
|
if (!rc && vm->requested_size != vm->plugged_size) {
|
|
|
|
if (vm->requested_size > vm->plugged_size) {
|
|
|
|
diff = vm->requested_size - vm->plugged_size;
|
|
|
|
rc = virtio_mem_plug_request(vm, diff);
|
2020-05-07 14:01:28 +00:00
|
|
|
} else {
|
|
|
|
diff = vm->plugged_size - vm->requested_size;
|
|
|
|
rc = virtio_mem_unplug_request(vm, diff);
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (rc) {
|
|
|
|
case 0:
|
2020-05-07 14:01:34 +00:00
|
|
|
vm->retry_timer_ms = VIRTIO_MEM_RETRY_TIMER_MIN_MS;
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
break;
|
|
|
|
case -ENOSPC:
|
|
|
|
/*
|
|
|
|
* We cannot add any more memory (alignment, physical limit)
|
|
|
|
* or we have too many offline memory blocks.
|
|
|
|
*/
|
|
|
|
break;
|
|
|
|
case -EBUSY:
|
|
|
|
/*
|
|
|
|
* The hypervisor cannot process our request right now
|
virtio-mem: Paravirtualized memory hotunplug part 2
We also want to unplug online memory (contained in online memory blocks
and, therefore, managed by the buddy), and eventually replug it later.
When requested to unplug memory, we use alloc_contig_range() to allocate
subblocks in online memory blocks (so we are the owner) and send them to
our hypervisor. When requested to plug memory, we can replug such memory
using free_contig_range() after asking our hypervisor.
We also want to mark all allocated pages PG_offline, so nobody will
touch them. To differentiate pages that were never onlined when
onlining the memory block from pages allocated via alloc_contig_range(), we
use PageDirty(). Based on this flag, virtio_mem_fake_online() can either
online the pages for the first time or use free_contig_range().
It is worth noting that there are no guarantees on how much memory can
actually get unplugged again. All device memory might completely be
fragmented with unmovable data, such that no subblock can get unplugged.
We are not touching the ZONE_MOVABLE. If memory is onlined to the
ZONE_MOVABLE, it can only get unplugged after that memory was offlined
manually by user space. In normal operation, virtio-mem memory is
suggested to be onlined to ZONE_NORMAL. In the future, we will try to
make unplug more likely to succeed.
Add a module parameter to control if online memory shall be touched.
As we want to access alloc_contig_range()/free_contig_range() from
kernel module context, export the symbols.
Note: Whenever virtio-mem uses alloc_contig_range(), all affected pages
are on the same node, in the same zone, and contain no holes.
Acked-by: Michal Hocko <mhocko@suse.com> # to export contig range allocator API
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-6-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:29 +00:00
|
|
|
* (e.g., out of memory, migrating) or we cannot free up
|
|
|
|
* any memory to unplug it (all plugged memory is busy).
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
*/
|
|
|
|
case -ENOMEM:
|
|
|
|
/* Out of memory, try again later. */
|
2020-05-07 14:01:34 +00:00
|
|
|
hrtimer_start(&vm->retry_timer, ms_to_ktime(vm->retry_timer_ms),
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
HRTIMER_MODE_REL);
|
|
|
|
break;
|
|
|
|
case -EAGAIN:
|
|
|
|
/* Retry immediately (e.g., the config changed). */
|
|
|
|
goto retry;
|
|
|
|
default:
|
|
|
|
/* Unknown error, mark as broken */
|
|
|
|
dev_err(&vm->vdev->dev,
|
|
|
|
"unknown error, marking device broken: %d\n", rc);
|
|
|
|
vm->broken = true;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static enum hrtimer_restart virtio_mem_timer_expired(struct hrtimer *timer)
|
|
|
|
{
|
|
|
|
struct virtio_mem *vm = container_of(timer, struct virtio_mem,
|
|
|
|
retry_timer);
|
|
|
|
|
|
|
|
virtio_mem_retry(vm);
|
2020-05-07 14:01:34 +00:00
|
|
|
vm->retry_timer_ms = min_t(unsigned int, vm->retry_timer_ms * 2,
|
|
|
|
VIRTIO_MEM_RETRY_TIMER_MAX_MS);
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
return HRTIMER_NORESTART;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void virtio_mem_handle_response(struct virtqueue *vq)
|
|
|
|
{
|
|
|
|
struct virtio_mem *vm = vq->vdev->priv;
|
|
|
|
|
|
|
|
wake_up(&vm->host_resp);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int virtio_mem_init_vq(struct virtio_mem *vm)
|
|
|
|
{
|
|
|
|
struct virtqueue *vq;
|
|
|
|
|
|
|
|
vq = virtio_find_single_vq(vm->vdev, virtio_mem_handle_response,
|
|
|
|
"guest-request");
|
|
|
|
if (IS_ERR(vq))
|
|
|
|
return PTR_ERR(vq);
|
|
|
|
vm->vq = vq;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Test if any memory in the range is present in Linux.
|
|
|
|
*/
|
|
|
|
static bool virtio_mem_any_memory_present(unsigned long start,
|
|
|
|
unsigned long size)
|
|
|
|
{
|
|
|
|
const unsigned long start_pfn = PFN_DOWN(start);
|
|
|
|
const unsigned long end_pfn = PFN_UP(start + size);
|
|
|
|
unsigned long pfn;
|
|
|
|
|
|
|
|
for (pfn = start_pfn; pfn != end_pfn; pfn++)
|
|
|
|
if (present_section_nr(pfn_to_section_nr(pfn)))
|
|
|
|
return true;
|
|
|
|
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int virtio_mem_init(struct virtio_mem *vm)
|
|
|
|
{
|
|
|
|
const uint64_t phys_limit = 1UL << MAX_PHYSMEM_BITS;
|
2020-05-07 14:01:27 +00:00
|
|
|
uint16_t node_id;
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
|
|
|
|
if (!vm->vdev->config->get) {
|
|
|
|
dev_err(&vm->vdev->dev, "config access disabled\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We don't want to (un)plug or reuse any memory when in kdump. The
|
|
|
|
* memory is still accessible (but not mapped).
|
|
|
|
*/
|
|
|
|
if (is_kdump_kernel()) {
|
|
|
|
dev_warn(&vm->vdev->dev, "disabled in kdump kernel\n");
|
|
|
|
return -EBUSY;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Fetch all properties that can't change. */
|
|
|
|
virtio_cread(vm->vdev, struct virtio_mem_config, plugged_size,
|
|
|
|
&vm->plugged_size);
|
|
|
|
virtio_cread(vm->vdev, struct virtio_mem_config, block_size,
|
|
|
|
&vm->device_block_size);
|
2020-05-07 14:01:27 +00:00
|
|
|
virtio_cread(vm->vdev, struct virtio_mem_config, node_id,
|
|
|
|
&node_id);
|
|
|
|
vm->nid = virtio_mem_translate_node_id(vm, node_id);
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
virtio_cread(vm->vdev, struct virtio_mem_config, addr, &vm->addr);
|
|
|
|
virtio_cread(vm->vdev, struct virtio_mem_config, region_size,
|
|
|
|
&vm->region_size);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If we still have memory plugged, we might have to unplug all
|
|
|
|
* memory first. However, if somebody simply unloaded the driver
|
|
|
|
* we would have to reinitialize the old state - something we don't
|
|
|
|
* support yet. Detect if we have any memory in the area present.
|
|
|
|
*/
|
|
|
|
if (vm->plugged_size) {
|
|
|
|
uint64_t usable_region_size;
|
|
|
|
|
|
|
|
virtio_cread(vm->vdev, struct virtio_mem_config,
|
|
|
|
usable_region_size, &usable_region_size);
|
|
|
|
|
|
|
|
if (virtio_mem_any_memory_present(vm->addr,
|
|
|
|
usable_region_size)) {
|
|
|
|
dev_err(&vm->vdev->dev,
|
|
|
|
"reloading the driver is not supported\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Note: it might happen that the device is busy and
|
|
|
|
* unplugging all memory might take some time.
|
|
|
|
*/
|
|
|
|
dev_info(&vm->vdev->dev, "unplugging all memory required\n");
|
|
|
|
vm->unplug_all_required = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We always hotplug memory in memory block granularity. This way,
|
|
|
|
* we have to wait for exactly one memory block to online.
|
|
|
|
*/
|
|
|
|
if (vm->device_block_size > memory_block_size_bytes()) {
|
|
|
|
dev_err(&vm->vdev->dev,
|
|
|
|
"The block size is not supported (too big).\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* bad device setup - warn only */
|
|
|
|
if (!IS_ALIGNED(vm->addr, memory_block_size_bytes()))
|
|
|
|
dev_warn(&vm->vdev->dev,
|
|
|
|
"The alignment of the physical start address can make some memory unusable.\n");
|
|
|
|
if (!IS_ALIGNED(vm->addr + vm->region_size, memory_block_size_bytes()))
|
|
|
|
dev_warn(&vm->vdev->dev,
|
|
|
|
"The alignment of the physical end address can make some memory unusable.\n");
|
|
|
|
if (vm->addr + vm->region_size > phys_limit)
|
|
|
|
dev_warn(&vm->vdev->dev,
|
|
|
|
"Some memory is not addressable. This can make some memory unusable.\n");
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Calculate the subblock size:
|
|
|
|
* - At least MAX_ORDER - 1 / pageblock_order.
|
|
|
|
* - At least the device block size.
|
|
|
|
* In the worst case, a single subblock per memory block.
|
|
|
|
*/
|
|
|
|
vm->subblock_size = PAGE_SIZE * 1u << max_t(uint32_t, MAX_ORDER - 1,
|
|
|
|
pageblock_order);
|
|
|
|
vm->subblock_size = max_t(uint32_t, vm->device_block_size,
|
|
|
|
vm->subblock_size);
|
|
|
|
vm->nb_sb_per_mb = memory_block_size_bytes() / vm->subblock_size;
|
|
|
|
|
|
|
|
/* Round up to the next full memory block */
|
|
|
|
vm->first_mb_id = virtio_mem_phys_to_mb_id(vm->addr - 1 +
|
|
|
|
memory_block_size_bytes());
|
|
|
|
vm->next_mb_id = vm->first_mb_id;
|
|
|
|
vm->last_mb_id = virtio_mem_phys_to_mb_id(vm->addr +
|
|
|
|
vm->region_size) - 1;
|
|
|
|
|
|
|
|
dev_info(&vm->vdev->dev, "start address: 0x%llx", vm->addr);
|
|
|
|
dev_info(&vm->vdev->dev, "region size: 0x%llx", vm->region_size);
|
|
|
|
dev_info(&vm->vdev->dev, "device block size: 0x%x",
|
|
|
|
vm->device_block_size);
|
|
|
|
dev_info(&vm->vdev->dev, "memory block size: 0x%lx",
|
|
|
|
memory_block_size_bytes());
|
|
|
|
dev_info(&vm->vdev->dev, "subblock size: 0x%x",
|
|
|
|
vm->subblock_size);
|
2020-05-07 14:01:27 +00:00
|
|
|
if (vm->nid != NUMA_NO_NODE)
|
|
|
|
dev_info(&vm->vdev->dev, "nid: %d", vm->nid);
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2020-05-07 14:01:35 +00:00
|
|
|
static int virtio_mem_create_resource(struct virtio_mem *vm)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* When force-unloading the driver and removing the device, we
|
|
|
|
* could have a garbage pointer. Duplicate the string.
|
|
|
|
*/
|
|
|
|
const char *name = kstrdup(dev_name(&vm->vdev->dev), GFP_KERNEL);
|
|
|
|
|
|
|
|
if (!name)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
vm->parent_resource = __request_mem_region(vm->addr, vm->region_size,
|
|
|
|
name, IORESOURCE_SYSTEM_RAM);
|
|
|
|
if (!vm->parent_resource) {
|
|
|
|
kfree(name);
|
|
|
|
dev_warn(&vm->vdev->dev, "could not reserve device region\n");
|
|
|
|
return -EBUSY;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* The memory is not actually busy - make add_memory() work. */
|
|
|
|
vm->parent_resource->flags &= ~IORESOURCE_BUSY;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void virtio_mem_delete_resource(struct virtio_mem *vm)
|
|
|
|
{
|
|
|
|
const char *name;
|
|
|
|
|
|
|
|
if (!vm->parent_resource)
|
|
|
|
return;
|
|
|
|
|
|
|
|
name = vm->parent_resource->name;
|
|
|
|
release_resource(vm->parent_resource);
|
|
|
|
kfree(vm->parent_resource);
|
|
|
|
kfree(name);
|
|
|
|
vm->parent_resource = NULL;
|
|
|
|
}
|
|
|
|
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
static int virtio_mem_probe(struct virtio_device *vdev)
|
|
|
|
{
|
|
|
|
struct virtio_mem *vm;
|
|
|
|
int rc = -EINVAL;
|
|
|
|
|
|
|
|
vdev->priv = vm = kzalloc(sizeof(*vm), GFP_KERNEL);
|
|
|
|
if (!vm)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
init_waitqueue_head(&vm->host_resp);
|
|
|
|
vm->vdev = vdev;
|
|
|
|
INIT_WORK(&vm->wq, virtio_mem_run_wq);
|
|
|
|
mutex_init(&vm->hotplug_mutex);
|
|
|
|
INIT_LIST_HEAD(&vm->next);
|
|
|
|
spin_lock_init(&vm->removal_lock);
|
|
|
|
hrtimer_init(&vm->retry_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
|
|
|
|
vm->retry_timer.function = virtio_mem_timer_expired;
|
2020-05-07 14:01:34 +00:00
|
|
|
vm->retry_timer_ms = VIRTIO_MEM_RETRY_TIMER_MIN_MS;
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
|
|
|
|
/* register the virtqueue */
|
|
|
|
rc = virtio_mem_init_vq(vm);
|
|
|
|
if (rc)
|
|
|
|
goto out_free_vm;
|
|
|
|
|
|
|
|
/* initialize the device by querying the config */
|
|
|
|
rc = virtio_mem_init(vm);
|
|
|
|
if (rc)
|
|
|
|
goto out_del_vq;
|
|
|
|
|
2020-05-07 14:01:35 +00:00
|
|
|
/* create the parent resource for all memory */
|
|
|
|
rc = virtio_mem_create_resource(vm);
|
|
|
|
if (rc)
|
|
|
|
goto out_del_vq;
|
|
|
|
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
/* register callbacks */
|
|
|
|
vm->memory_notifier.notifier_call = virtio_mem_memory_notifier_cb;
|
|
|
|
rc = register_memory_notifier(&vm->memory_notifier);
|
|
|
|
if (rc)
|
2020-05-07 14:01:35 +00:00
|
|
|
goto out_del_resource;
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
rc = register_virtio_mem_device(vm);
|
|
|
|
if (rc)
|
|
|
|
goto out_unreg_mem;
|
|
|
|
|
|
|
|
virtio_device_ready(vdev);
|
|
|
|
|
|
|
|
/* trigger a config update to start processing the requested_size */
|
|
|
|
atomic_set(&vm->config_changed, 1);
|
|
|
|
queue_work(system_freezable_wq, &vm->wq);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
out_unreg_mem:
|
|
|
|
unregister_memory_notifier(&vm->memory_notifier);
|
2020-05-07 14:01:35 +00:00
|
|
|
out_del_resource:
|
|
|
|
virtio_mem_delete_resource(vm);
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
out_del_vq:
|
|
|
|
vdev->config->del_vqs(vdev);
|
|
|
|
out_free_vm:
|
|
|
|
kfree(vm);
|
|
|
|
vdev->priv = NULL;
|
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void virtio_mem_remove(struct virtio_device *vdev)
|
|
|
|
{
|
|
|
|
struct virtio_mem *vm = vdev->priv;
|
|
|
|
unsigned long mb_id;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Make sure the workqueue won't be triggered anymore and no memory
|
|
|
|
* blocks can be onlined/offlined until we're finished here.
|
|
|
|
*/
|
|
|
|
mutex_lock(&vm->hotplug_mutex);
|
|
|
|
spin_lock_irq(&vm->removal_lock);
|
|
|
|
vm->removing = true;
|
|
|
|
spin_unlock_irq(&vm->removal_lock);
|
|
|
|
mutex_unlock(&vm->hotplug_mutex);
|
|
|
|
|
|
|
|
/* wait until the workqueue stopped */
|
|
|
|
cancel_work_sync(&vm->wq);
|
|
|
|
hrtimer_cancel(&vm->retry_timer);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* After we unregistered our callbacks, user space can online partially
|
|
|
|
* plugged offline blocks. Make sure to remove them.
|
|
|
|
*/
|
|
|
|
virtio_mem_for_each_mb_state(vm, mb_id,
|
|
|
|
VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL) {
|
|
|
|
rc = virtio_mem_mb_remove(vm, mb_id);
|
|
|
|
BUG_ON(rc);
|
|
|
|
virtio_mem_mb_set_state(vm, mb_id, VIRTIO_MEM_MB_STATE_UNUSED);
|
|
|
|
}
|
2020-05-07 14:01:31 +00:00
|
|
|
/*
|
|
|
|
* After we unregistered our callbacks, user space can no longer
|
|
|
|
* offline partially plugged online memory blocks. No need to worry
|
|
|
|
* about them.
|
|
|
|
*/
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
|
|
|
|
/* unregister callbacks */
|
|
|
|
unregister_virtio_mem_device(vm);
|
|
|
|
unregister_memory_notifier(&vm->memory_notifier);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* There is no way we could reliably remove all memory we have added to
|
|
|
|
* the system. And there is no way to stop the driver/device from going
|
|
|
|
* away. Warn at least.
|
|
|
|
*/
|
|
|
|
if (vm->nb_mb_state[VIRTIO_MEM_MB_STATE_OFFLINE] ||
|
|
|
|
vm->nb_mb_state[VIRTIO_MEM_MB_STATE_OFFLINE_PARTIAL] ||
|
|
|
|
vm->nb_mb_state[VIRTIO_MEM_MB_STATE_ONLINE] ||
|
|
|
|
vm->nb_mb_state[VIRTIO_MEM_MB_STATE_ONLINE_PARTIAL] ||
|
|
|
|
vm->nb_mb_state[VIRTIO_MEM_MB_STATE_ONLINE_MOVABLE])
|
|
|
|
dev_warn(&vdev->dev, "device still has system memory added\n");
|
2020-05-07 14:01:35 +00:00
|
|
|
else
|
|
|
|
virtio_mem_delete_resource(vm);
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
|
|
|
|
/* remove all tracking data - no locking needed */
|
|
|
|
vfree(vm->mb_state);
|
|
|
|
vfree(vm->sb_bitmap);
|
|
|
|
|
|
|
|
/* reset the device and cleanup the queues */
|
|
|
|
vdev->config->reset(vdev);
|
|
|
|
vdev->config->del_vqs(vdev);
|
|
|
|
|
|
|
|
kfree(vm);
|
|
|
|
vdev->priv = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void virtio_mem_config_changed(struct virtio_device *vdev)
|
|
|
|
{
|
|
|
|
struct virtio_mem *vm = vdev->priv;
|
|
|
|
|
|
|
|
atomic_set(&vm->config_changed, 1);
|
|
|
|
virtio_mem_retry(vm);
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
|
|
static int virtio_mem_freeze(struct virtio_device *vdev)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* When restarting the VM, all memory is usually unplugged. Don't
|
|
|
|
* allow to suspend/hibernate.
|
|
|
|
*/
|
|
|
|
dev_err(&vdev->dev, "save/restore not supported.\n");
|
|
|
|
return -EPERM;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int virtio_mem_restore(struct virtio_device *vdev)
|
|
|
|
{
|
|
|
|
return -EPERM;
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2020-05-07 14:01:27 +00:00
|
|
|
static unsigned int virtio_mem_features[] = {
|
|
|
|
#if defined(CONFIG_NUMA) && defined(CONFIG_ACPI_NUMA)
|
|
|
|
VIRTIO_MEM_F_ACPI_PXM,
|
|
|
|
#endif
|
|
|
|
};
|
|
|
|
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
static struct virtio_device_id virtio_mem_id_table[] = {
|
|
|
|
{ VIRTIO_ID_MEM, VIRTIO_DEV_ANY_ID },
|
|
|
|
{ 0 },
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct virtio_driver virtio_mem_driver = {
|
2020-05-07 14:01:27 +00:00
|
|
|
.feature_table = virtio_mem_features,
|
|
|
|
.feature_table_size = ARRAY_SIZE(virtio_mem_features),
|
virtio-mem: Paravirtualized memory hotplug
Each virtio-mem device owns exactly one memory region. It is responsible
for adding/removing memory from that memory region on request.
When the device driver starts up, the requested amount of memory is
queried and then plugged to Linux. On request, further memory can be
plugged or unplugged. This patch only implements the plugging part.
On x86-64, memory can currently be plugged in 4MB ("subblock") granularity.
When required, a new memory block will be added (e.g., usually 128MB on
x86-64) in order to plug more subblocks. Only x86-64 was tested for now.
The online_page callback is used to keep unplugged subblocks offline
when onlining memory - similar to the Hyper-V balloon driver. Unplugged
pages are marked PG_offline, to tell dump tools (e.g., makedumpfile) to
skip them.
User space is usually responsible for onlining the added memory. The
memory hotplug notifier is used to synchronize virtio-mem activity
against memory onlining/offlining.
Each virtio-mem device can belong to a NUMA node, which allows us to
easily add/remove small chunks of memory to/from a specific NUMA node by
using multiple virtio-mem devices. Something that works even when the
guest has no idea about the NUMA topology.
One way to view virtio-mem is as a "resizable DIMM" or a DIMM with many
"sub-DIMMS".
This patch directly introduces the basic infrastructure to implement memory
unplug. Especially the memory block states and subblock bitmaps will be
heavily used there.
Notes:
- In case memory is to be onlined by user space, we limit the amount of
offline memory blocks, to not run out of memory. This is esp. an
issue if memory is added faster than it is getting onlined.
- Suspend/Hibernate is not supported due to the way virtio-mem devices
behave. Limited support might be possible in the future.
- Reloading the device driver is not supported.
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Tested-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: linux-acpi@vger.kernel.org
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200507140139.17083-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-05-07 14:01:25 +00:00
|
|
|
.driver.name = KBUILD_MODNAME,
|
|
|
|
.driver.owner = THIS_MODULE,
|
|
|
|
.id_table = virtio_mem_id_table,
|
|
|
|
.probe = virtio_mem_probe,
|
|
|
|
.remove = virtio_mem_remove,
|
|
|
|
.config_changed = virtio_mem_config_changed,
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
|
|
.freeze = virtio_mem_freeze,
|
|
|
|
.restore = virtio_mem_restore,
|
|
|
|
#endif
|
|
|
|
};
|
|
|
|
|
|
|
|
module_virtio_driver(virtio_mem_driver);
|
|
|
|
MODULE_DEVICE_TABLE(virtio, virtio_mem_id_table);
|
|
|
|
MODULE_AUTHOR("David Hildenbrand <david@redhat.com>");
|
|
|
|
MODULE_DESCRIPTION("Virtio-mem driver");
|
|
|
|
MODULE_LICENSE("GPL");
|