linux/Documentation/devicetree/bindings/clock/exynos4-clock.txt

* Samsung Exynos4 Clock Controller

The Exynos4 clock controller generates and supplies clock to various controllers
within the Exynos4 SoC. The clock binding described here is applicable to all
SoC's in the Exynos4 family.

Required Properties:

- compatible: should be one of the following.
  - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
  - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.

- reg: physical base address of the controller and length of memory mapped
  region.

- #clock-cells: should be 1.

Each clock is assigned an identifier and client nodes can use this identifier
to specify the clock which they consume.

All available clocks are defined as preprocessor macros in
dt-bindings/clock/exynos4.h header and can be used in device
tree sources.

Example 1: An example of a clock controller node is listed below.

	clock: clock-controller@0x10030000 {
		compatible = "samsung,exynos4210-clock";
		reg = <0x10030000 0x20000>;
		#clock-cells = <1>;
	};

Example 2: UART controller node that consumes the clock generated by the clock
	   controller. Refer to the standard clock bindings for information
	   about 'clocks' and 'clock-names' property.

	serial@13820000 {
		compatible = "samsung,exynos4210-uart";
		reg = <0x13820000 0x100>;
		interrupts = <0 54 0>;
		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
		clock-names = "uart", "clk_uart_baud0";
	};