linux/drivers/iommu/mtk_iommu.c

1542 lines
46 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2015-2016 MediaTek Inc.
* Author: Yong Wu <yong.wu@mediatek.com>
*/
#include <linux/bitfield.h>
#include <linux/bug.h>
#include <linux/clk.h>
#include <linux/component.h>
#include <linux/device.h>
#include <linux/dma-direct.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iommu.h>
#include <linux/iopoll.h>
#include <linux/io-pgtable.h>
#include <linux/list.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/soc/mediatek/infracfg.h>
#include <asm/barrier.h>
#include <soc/mediatek/smi.h>
#include <dt-bindings/memory/mtk-memory-port.h>
#define REG_MMU_PT_BASE_ADDR 0x000
#define MMU_PT_ADDR_MASK GENMASK(31, 7)
#define REG_MMU_INVALIDATE 0x020
#define F_ALL_INVLD 0x2
#define F_MMU_INV_RANGE 0x1
#define REG_MMU_INVLD_START_A 0x024
#define REG_MMU_INVLD_END_A 0x028
#define REG_MMU_INV_SEL_GEN2 0x02c
#define REG_MMU_INV_SEL_GEN1 0x038
#define F_INVLD_EN0 BIT(0)
#define F_INVLD_EN1 BIT(1)
#define REG_MMU_MISC_CTRL 0x048
#define F_MMU_IN_ORDER_WR_EN_MASK (BIT(1) | BIT(17))
#define F_MMU_STANDARD_AXI_MODE_MASK (BIT(3) | BIT(19))
#define REG_MMU_DCM_DIS 0x050
#define F_MMU_DCM BIT(8)
#define REG_MMU_WR_LEN_CTRL 0x054
#define F_MMU_WR_THROT_DIS_MASK (BIT(5) | BIT(21))
#define REG_MMU_CTRL_REG 0x110
#define F_MMU_TF_PROT_TO_PROGRAM_ADDR (2 << 4)
#define F_MMU_PREFETCH_RT_REPLACE_MOD BIT(4)
#define F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173 (2 << 5)
#define REG_MMU_IVRP_PADDR 0x114
#define REG_MMU_VLD_PA_RNG 0x118
#define F_MMU_VLD_PA_RNG(EA, SA) (((EA) << 8) | (SA))
#define REG_MMU_INT_CONTROL0 0x120
#define F_L2_MULIT_HIT_EN BIT(0)
#define F_TABLE_WALK_FAULT_INT_EN BIT(1)
#define F_PREETCH_FIFO_OVERFLOW_INT_EN BIT(2)
#define F_MISS_FIFO_OVERFLOW_INT_EN BIT(3)
#define F_PREFETCH_FIFO_ERR_INT_EN BIT(5)
#define F_MISS_FIFO_ERR_INT_EN BIT(6)
#define F_INT_CLR_BIT BIT(12)
#define REG_MMU_INT_MAIN_CONTROL 0x124
/* mmu0 | mmu1 */
#define F_INT_TRANSLATION_FAULT (BIT(0) | BIT(7))
#define F_INT_MAIN_MULTI_HIT_FAULT (BIT(1) | BIT(8))
#define F_INT_INVALID_PA_FAULT (BIT(2) | BIT(9))
#define F_INT_ENTRY_REPLACEMENT_FAULT (BIT(3) | BIT(10))
#define F_INT_TLB_MISS_FAULT (BIT(4) | BIT(11))
#define F_INT_MISS_TRANSACTION_FIFO_FAULT (BIT(5) | BIT(12))
#define F_INT_PRETETCH_TRANSATION_FIFO_FAULT (BIT(6) | BIT(13))
#define REG_MMU_CPE_DONE 0x12C
#define REG_MMU_FAULT_ST1 0x134
#define F_REG_MMU0_FAULT_MASK GENMASK(6, 0)
#define F_REG_MMU1_FAULT_MASK GENMASK(13, 7)
#define REG_MMU0_FAULT_VA 0x13c
#define F_MMU_INVAL_VA_31_12_MASK GENMASK(31, 12)
#define F_MMU_INVAL_VA_34_32_MASK GENMASK(11, 9)
#define F_MMU_INVAL_PA_34_32_MASK GENMASK(8, 6)
#define F_MMU_FAULT_VA_WRITE_BIT BIT(1)
#define F_MMU_FAULT_VA_LAYER_BIT BIT(0)
#define REG_MMU0_INVLD_PA 0x140
#define REG_MMU1_FAULT_VA 0x144
#define REG_MMU1_INVLD_PA 0x148
#define REG_MMU0_INT_ID 0x150
#define REG_MMU1_INT_ID 0x154
#define F_MMU_INT_ID_COMM_ID(a) (((a) >> 9) & 0x7)
#define F_MMU_INT_ID_SUB_COMM_ID(a) (((a) >> 7) & 0x3)
#define F_MMU_INT_ID_COMM_ID_EXT(a) (((a) >> 10) & 0x7)
#define F_MMU_INT_ID_SUB_COMM_ID_EXT(a) (((a) >> 7) & 0x7)
#define F_MMU_INT_ID_LARB_ID(a) (((a) >> 7) & 0x7)
#define F_MMU_INT_ID_PORT_ID(a) (((a) >> 2) & 0x1f)
#define MTK_PROTECT_PA_ALIGN 256
#define MTK_IOMMU_BANK_SZ 0x1000
#define PERICFG_IOMMU_1 0x714
#define HAS_4GB_MODE BIT(0)
/* HW will use the EMI clock if there isn't the "bclk". */
#define HAS_BCLK BIT(1)
#define HAS_VLD_PA_RNG BIT(2)
#define RESET_AXI BIT(3)
#define OUT_ORDER_WR_EN BIT(4)
#define HAS_SUB_COMM_2BITS BIT(5)
#define HAS_SUB_COMM_3BITS BIT(6)
#define WR_THROT_EN BIT(7)
#define HAS_LEGACY_IVRP_PADDR BIT(8)
#define IOVA_34_EN BIT(9)
#define SHARE_PGTABLE BIT(10) /* 2 HW share pgtable */
#define DCM_DISABLE BIT(11)
#define STD_AXI_MODE BIT(12) /* For non MM iommu */
/* 2 bits: iommu type */
#define MTK_IOMMU_TYPE_MM (0x0 << 13)
#define MTK_IOMMU_TYPE_INFRA (0x1 << 13)
#define MTK_IOMMU_TYPE_MASK (0x3 << 13)
/* PM and clock always on. e.g. infra iommu */
#define PM_CLK_AO BIT(15)
#define IFA_IOMMU_PCIE_SUPPORT BIT(16)
#define MTK_IOMMU_HAS_FLAG_MASK(pdata, _x, mask) \
((((pdata)->flags) & (mask)) == (_x))
#define MTK_IOMMU_HAS_FLAG(pdata, _x) MTK_IOMMU_HAS_FLAG_MASK(pdata, _x, _x)
#define MTK_IOMMU_IS_TYPE(pdata, _x) MTK_IOMMU_HAS_FLAG_MASK(pdata, _x,\
MTK_IOMMU_TYPE_MASK)
#define MTK_INVALID_LARBID MTK_LARB_NR_MAX
#define MTK_LARB_COM_MAX 8
#define MTK_LARB_SUBCOM_MAX 8
#define MTK_IOMMU_GROUP_MAX 8
#define MTK_IOMMU_BANK_MAX 5
enum mtk_iommu_plat {
M4U_MT2712,
M4U_MT6779,
M4U_MT8167,
M4U_MT8173,
M4U_MT8183,
M4U_MT8186,
M4U_MT8192,
M4U_MT8195,
};
struct mtk_iommu_iova_region {
dma_addr_t iova_base;
unsigned long long size;
};
struct mtk_iommu_suspend_reg {
u32 misc_ctrl;
u32 dcm_dis;
u32 ctrl_reg;
u32 vld_pa_rng;
u32 wr_len_ctrl;
u32 int_control[MTK_IOMMU_BANK_MAX];
u32 int_main_control[MTK_IOMMU_BANK_MAX];
u32 ivrp_paddr[MTK_IOMMU_BANK_MAX];
};
struct mtk_iommu_plat_data {
enum mtk_iommu_plat m4u_plat;
u32 flags;
u32 inv_sel_reg;
char *pericfg_comp_str;
struct list_head *hw_list;
unsigned int iova_region_nr;
const struct mtk_iommu_iova_region *iova_region;
u8 banks_num;
bool banks_enable[MTK_IOMMU_BANK_MAX];
unsigned int banks_portmsk[MTK_IOMMU_BANK_MAX];
unsigned char larbid_remap[MTK_LARB_COM_MAX][MTK_LARB_SUBCOM_MAX];
};
struct mtk_iommu_bank_data {
void __iomem *base;
int irq;
u8 id;
struct device *parent_dev;
struct mtk_iommu_data *parent_data;
spinlock_t tlb_lock; /* lock for tlb range flush */
struct mtk_iommu_domain *m4u_dom; /* Each bank has a domain */
};
struct mtk_iommu_data {
struct device *dev;
struct clk *bclk;
phys_addr_t protect_base; /* protect memory base */
struct mtk_iommu_suspend_reg reg;
struct iommu_group *m4u_group[MTK_IOMMU_GROUP_MAX];
bool enable_4GB;
struct iommu_device iommu;
const struct mtk_iommu_plat_data *plat_data;
struct device *smicomm_dev;
struct mtk_iommu_bank_data *bank;
struct dma_iommu_mapping *mapping; /* For mtk_iommu_v1.c */
struct regmap *pericfg;
struct mutex mutex; /* Protect m4u_group/m4u_dom above */
/*
* In the sharing pgtable case, list data->list to the global list like m4ulist.
* In the non-sharing pgtable case, list data->list to the itself hw_list_head.
*/
struct list_head *hw_list;
struct list_head hw_list_head;
struct list_head list;
struct mtk_smi_larb_iommu larb_imu[MTK_LARB_NR_MAX];
};
struct mtk_iommu_domain {
struct io_pgtable_cfg cfg;
struct io_pgtable_ops *iop;
struct mtk_iommu_bank_data *bank;
struct iommu_domain domain;
struct mutex mutex; /* Protect "data" in this structure */
};
static int mtk_iommu_bind(struct device *dev)
{
struct mtk_iommu_data *data = dev_get_drvdata(dev);
return component_bind_all(dev, &data->larb_imu);
}
static void mtk_iommu_unbind(struct device *dev)
{
struct mtk_iommu_data *data = dev_get_drvdata(dev);
component_unbind_all(dev, &data->larb_imu);
}
static const struct iommu_ops mtk_iommu_ops;
static int mtk_iommu_hw_init(const struct mtk_iommu_data *data, unsigned int bankid);
#define MTK_IOMMU_TLB_ADDR(iova) ({ \
dma_addr_t _addr = iova; \
((lower_32_bits(_addr) & GENMASK(31, 12)) | upper_32_bits(_addr));\
})
/*
* In M4U 4GB mode, the physical address is remapped as below:
*
* CPU Physical address:
* ====================
*
* 0 1G 2G 3G 4G 5G
* |---A---|---B---|---C---|---D---|---E---|
* +--I/O--+------------Memory-------------+
*
* IOMMU output physical address:
* =============================
*
* 4G 5G 6G 7G 8G
* |---E---|---B---|---C---|---D---|
* +------------Memory-------------+
*
* The Region 'A'(I/O) can NOT be mapped by M4U; For Region 'B'/'C'/'D', the
* bit32 of the CPU physical address always is needed to set, and for Region
* 'E', the CPU physical address keep as is.
* Additionally, The iommu consumers always use the CPU phyiscal address.
*/
#define MTK_IOMMU_4GB_MODE_REMAP_BASE 0x140000000UL
static LIST_HEAD(m4ulist); /* List all the M4U HWs */
#define for_each_m4u(data, head) list_for_each_entry(data, head, list)
static const struct mtk_iommu_iova_region single_domain[] = {
{.iova_base = 0, .size = SZ_4G},
};
static const struct mtk_iommu_iova_region mt8192_multi_dom[] = {
{ .iova_base = 0x0, .size = SZ_4G}, /* 0 ~ 4G */
#if IS_ENABLED(CONFIG_ARCH_DMA_ADDR_T_64BIT)
{ .iova_base = SZ_4G, .size = SZ_4G}, /* 4G ~ 8G */
{ .iova_base = SZ_4G * 2, .size = SZ_4G}, /* 8G ~ 12G */
{ .iova_base = SZ_4G * 3, .size = SZ_4G}, /* 12G ~ 16G */
{ .iova_base = 0x240000000ULL, .size = 0x4000000}, /* CCU0 */
{ .iova_base = 0x244000000ULL, .size = 0x4000000}, /* CCU1 */
#endif
};
/* If 2 M4U share a domain(use the same hwlist), Put the corresponding info in first data.*/
static struct mtk_iommu_data *mtk_iommu_get_frst_data(struct list_head *hwlist)
{
return list_first_entry(hwlist, struct mtk_iommu_data, list);
}
static struct mtk_iommu_domain *to_mtk_domain(struct iommu_domain *dom)
{
return container_of(dom, struct mtk_iommu_domain, domain);
}
static void mtk_iommu_tlb_flush_all(struct mtk_iommu_data *data)
{
/* Tlb flush all always is in bank0. */
struct mtk_iommu_bank_data *bank = &data->bank[0];
void __iomem *base = bank->base;
unsigned long flags;
iommu/mediatek: Add power-domain operation In the previous SoC, the M4U HW is in the EMI power domain which is always on. the latest M4U is in the display power domain which may be turned on/off, thus we have to add pm_runtime interface for it. When the engine work, the engine always enable the power and clocks for smi-larb/smi-common, then the M4U's power will always be powered on automatically via the device link with smi-common. Note: we don't enable the M4U power in iommu_map/unmap for tlb flush. If its power already is on, of course it is ok. if the power is off, the main tlb will be reset while M4U power on, thus the tlb flush while m4u power off is unnecessary, just skip it. Therefore, we increase the ref_count for pm when pm status is ACTIVE, otherwise, skip it. Meanwhile, the tlb_flush_range is called so often, thus, update pm ref_count while the SoC has power-domain to avoid touch the dev->power.lock. and the tlb_flush_all only is called when boot, so no need check if the SoC has power-domain to keep code clean. There will be one case that pm runctime status is not expected when tlb flush. After boot, the display may call dma_alloc_attrs before it call pm_runtime_get(disp-dev), then the m4u's pm status is not active inside the dma_alloc_attrs. Since it only happens after boot, the tlb is clean at that time, I also think this is ok. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-21-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-11 11:19:01 +00:00
spin_lock_irqsave(&bank->tlb_lock, flags);
writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0, base + data->plat_data->inv_sel_reg);
writel_relaxed(F_ALL_INVLD, base + REG_MMU_INVALIDATE);
wmb(); /* Make sure the tlb flush all done */
spin_unlock_irqrestore(&bank->tlb_lock, flags);
}
static void mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size,
struct mtk_iommu_bank_data *bank)
{
struct list_head *head = bank->parent_data->hw_list;
struct mtk_iommu_bank_data *curbank;
struct mtk_iommu_data *data;
bool check_pm_status;
unsigned long flags;
void __iomem *base;
int ret;
u32 tmp;
for_each_m4u(data, head) {
/*
* To avoid resume the iommu device frequently when the iommu device
* is not active, it doesn't always call pm_runtime_get here, then tlb
* flush depends on the tlb flush all in the runtime resume.
*
* There are 2 special cases:
*
* Case1: The iommu dev doesn't have power domain but has bclk. This case
* should also avoid the tlb flush while the dev is not active to mute
* the tlb timeout log. like mt8173.
*
* Case2: The power/clock of infra iommu is always on, and it doesn't
* have the device link with the master devices. This case should avoid
* the PM status check.
*/
check_pm_status = !MTK_IOMMU_HAS_FLAG(data->plat_data, PM_CLK_AO);
if (check_pm_status) {
if (pm_runtime_get_if_in_use(data->dev) <= 0)
continue;
}
iommu/mediatek: Add power-domain operation In the previous SoC, the M4U HW is in the EMI power domain which is always on. the latest M4U is in the display power domain which may be turned on/off, thus we have to add pm_runtime interface for it. When the engine work, the engine always enable the power and clocks for smi-larb/smi-common, then the M4U's power will always be powered on automatically via the device link with smi-common. Note: we don't enable the M4U power in iommu_map/unmap for tlb flush. If its power already is on, of course it is ok. if the power is off, the main tlb will be reset while M4U power on, thus the tlb flush while m4u power off is unnecessary, just skip it. Therefore, we increase the ref_count for pm when pm status is ACTIVE, otherwise, skip it. Meanwhile, the tlb_flush_range is called so often, thus, update pm ref_count while the SoC has power-domain to avoid touch the dev->power.lock. and the tlb_flush_all only is called when boot, so no need check if the SoC has power-domain to keep code clean. There will be one case that pm runctime status is not expected when tlb flush. After boot, the display may call dma_alloc_attrs before it call pm_runtime_get(disp-dev), then the m4u's pm status is not active inside the dma_alloc_attrs. Since it only happens after boot, the tlb is clean at that time, I also think this is ok. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-21-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-11 11:19:01 +00:00
curbank = &data->bank[bank->id];
base = curbank->base;
spin_lock_irqsave(&curbank->tlb_lock, flags);
writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
base + data->plat_data->inv_sel_reg);
writel_relaxed(MTK_IOMMU_TLB_ADDR(iova), base + REG_MMU_INVLD_START_A);
writel_relaxed(MTK_IOMMU_TLB_ADDR(iova + size - 1),
base + REG_MMU_INVLD_END_A);
writel_relaxed(F_MMU_INV_RANGE, base + REG_MMU_INVALIDATE);
/* tlb sync */
ret = readl_poll_timeout_atomic(base + REG_MMU_CPE_DONE,
tmp, tmp != 0, 10, 1000);
/* Clear the CPE status */
writel_relaxed(0, base + REG_MMU_CPE_DONE);
spin_unlock_irqrestore(&curbank->tlb_lock, flags);
if (ret) {
dev_warn(data->dev,
"Partial TLB flush timed out, falling back to full flush\n");
mtk_iommu_tlb_flush_all(data);
}
iommu/mediatek: Add power-domain operation In the previous SoC, the M4U HW is in the EMI power domain which is always on. the latest M4U is in the display power domain which may be turned on/off, thus we have to add pm_runtime interface for it. When the engine work, the engine always enable the power and clocks for smi-larb/smi-common, then the M4U's power will always be powered on automatically via the device link with smi-common. Note: we don't enable the M4U power in iommu_map/unmap for tlb flush. If its power already is on, of course it is ok. if the power is off, the main tlb will be reset while M4U power on, thus the tlb flush while m4u power off is unnecessary, just skip it. Therefore, we increase the ref_count for pm when pm status is ACTIVE, otherwise, skip it. Meanwhile, the tlb_flush_range is called so often, thus, update pm ref_count while the SoC has power-domain to avoid touch the dev->power.lock. and the tlb_flush_all only is called when boot, so no need check if the SoC has power-domain to keep code clean. There will be one case that pm runctime status is not expected when tlb flush. After boot, the display may call dma_alloc_attrs before it call pm_runtime_get(disp-dev), then the m4u's pm status is not active inside the dma_alloc_attrs. Since it only happens after boot, the tlb is clean at that time, I also think this is ok. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-21-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-11 11:19:01 +00:00
if (check_pm_status)
pm_runtime_put(data->dev);
}
}
static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
{
struct mtk_iommu_bank_data *bank = dev_id;
struct mtk_iommu_data *data = bank->parent_data;
struct mtk_iommu_domain *dom = bank->m4u_dom;
unsigned int fault_larb = MTK_INVALID_LARBID, fault_port = 0, sub_comm = 0;
u32 int_state, regval, va34_32, pa34_32;
const struct mtk_iommu_plat_data *plat_data = data->plat_data;
void __iomem *base = bank->base;
u64 fault_iova, fault_pa;
bool layer, write;
/* Read error info from registers */
int_state = readl_relaxed(base + REG_MMU_FAULT_ST1);
if (int_state & F_REG_MMU0_FAULT_MASK) {
regval = readl_relaxed(base + REG_MMU0_INT_ID);
fault_iova = readl_relaxed(base + REG_MMU0_FAULT_VA);
fault_pa = readl_relaxed(base + REG_MMU0_INVLD_PA);
} else {
regval = readl_relaxed(base + REG_MMU1_INT_ID);
fault_iova = readl_relaxed(base + REG_MMU1_FAULT_VA);
fault_pa = readl_relaxed(base + REG_MMU1_INVLD_PA);
}
layer = fault_iova & F_MMU_FAULT_VA_LAYER_BIT;
write = fault_iova & F_MMU_FAULT_VA_WRITE_BIT;
if (MTK_IOMMU_HAS_FLAG(plat_data, IOVA_34_EN)) {
va34_32 = FIELD_GET(F_MMU_INVAL_VA_34_32_MASK, fault_iova);
fault_iova = fault_iova & F_MMU_INVAL_VA_31_12_MASK;
fault_iova |= (u64)va34_32 << 32;
}
pa34_32 = FIELD_GET(F_MMU_INVAL_PA_34_32_MASK, fault_iova);
fault_pa |= (u64)pa34_32 << 32;
if (MTK_IOMMU_IS_TYPE(plat_data, MTK_IOMMU_TYPE_MM)) {
fault_port = F_MMU_INT_ID_PORT_ID(regval);
if (MTK_IOMMU_HAS_FLAG(plat_data, HAS_SUB_COMM_2BITS)) {
fault_larb = F_MMU_INT_ID_COMM_ID(regval);
sub_comm = F_MMU_INT_ID_SUB_COMM_ID(regval);
} else if (MTK_IOMMU_HAS_FLAG(plat_data, HAS_SUB_COMM_3BITS)) {
fault_larb = F_MMU_INT_ID_COMM_ID_EXT(regval);
sub_comm = F_MMU_INT_ID_SUB_COMM_ID_EXT(regval);
} else {
fault_larb = F_MMU_INT_ID_LARB_ID(regval);
}
fault_larb = data->plat_data->larbid_remap[fault_larb][sub_comm];
}
if (report_iommu_fault(&dom->domain, bank->parent_dev, fault_iova,
write ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ)) {
dev_err_ratelimited(
bank->parent_dev,
"fault type=0x%x iova=0x%llx pa=0x%llx master=0x%x(larb=%d port=%d) layer=%d %s\n",
int_state, fault_iova, fault_pa, regval, fault_larb, fault_port,
layer, write ? "write" : "read");
}
/* Interrupt clear */
regval = readl_relaxed(base + REG_MMU_INT_CONTROL0);
regval |= F_INT_CLR_BIT;
writel_relaxed(regval, base + REG_MMU_INT_CONTROL0);
mtk_iommu_tlb_flush_all(data);
return IRQ_HANDLED;
}
static unsigned int mtk_iommu_get_bank_id(struct device *dev,
const struct mtk_iommu_plat_data *plat_data)
{
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
unsigned int i, portmsk = 0, bankid = 0;
if (plat_data->banks_num == 1)
return bankid;
for (i = 0; i < fwspec->num_ids; i++)
portmsk |= BIT(MTK_M4U_TO_PORT(fwspec->ids[i]));
for (i = 0; i < plat_data->banks_num && i < MTK_IOMMU_BANK_MAX; i++) {
if (!plat_data->banks_enable[i])
continue;
if (portmsk & plat_data->banks_portmsk[i]) {
bankid = i;
break;
}
}
return bankid; /* default is 0 */
}
static int mtk_iommu_get_iova_region_id(struct device *dev,
const struct mtk_iommu_plat_data *plat_data)
{
const struct mtk_iommu_iova_region *rgn = plat_data->iova_region;
const struct bus_dma_region *dma_rgn = dev->dma_range_map;
int i, candidate = -1;
dma_addr_t dma_end;
if (!dma_rgn || plat_data->iova_region_nr == 1)
return 0;
dma_end = dma_rgn->dma_start + dma_rgn->size - 1;
for (i = 0; i < plat_data->iova_region_nr; i++, rgn++) {
/* Best fit. */
if (dma_rgn->dma_start == rgn->iova_base &&
dma_end == rgn->iova_base + rgn->size - 1)
return i;
/* ok if it is inside this region. */
if (dma_rgn->dma_start >= rgn->iova_base &&
dma_end < rgn->iova_base + rgn->size)
candidate = i;
}
if (candidate >= 0)
return candidate;
dev_err(dev, "Can NOT find the iommu domain id(%pad 0x%llx).\n",
&dma_rgn->dma_start, dma_rgn->size);
return -EINVAL;
}
static int mtk_iommu_config(struct mtk_iommu_data *data, struct device *dev,
bool enable, unsigned int regionid)
{
struct mtk_smi_larb_iommu *larb_mmu;
unsigned int larbid, portid;
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
const struct mtk_iommu_iova_region *region;
u32 peri_mmuen, peri_mmuen_msk;
int i, ret = 0;
for (i = 0; i < fwspec->num_ids; ++i) {
larbid = MTK_M4U_TO_LARB(fwspec->ids[i]);
portid = MTK_M4U_TO_PORT(fwspec->ids[i]);
if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_MM)) {
larb_mmu = &data->larb_imu[larbid];
region = data->plat_data->iova_region + regionid;
larb_mmu->bank[portid] = upper_32_bits(region->iova_base);
dev_dbg(dev, "%s iommu for larb(%s) port %d region %d rgn-bank %d.\n",
enable ? "enable" : "disable", dev_name(larb_mmu->dev),
portid, regionid, larb_mmu->bank[portid]);
if (enable)
larb_mmu->mmu |= MTK_SMI_MMU_EN(portid);
else
larb_mmu->mmu &= ~MTK_SMI_MMU_EN(portid);
} else if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_INFRA)) {
peri_mmuen_msk = BIT(portid);
/* PCI dev has only one output id, enable the next writing bit for PCIe */
if (dev_is_pci(dev))
peri_mmuen_msk |= BIT(portid + 1);
peri_mmuen = enable ? peri_mmuen_msk : 0;
ret = regmap_update_bits(data->pericfg, PERICFG_IOMMU_1,
peri_mmuen_msk, peri_mmuen);
if (ret)
dev_err(dev, "%s iommu(%s) inframaster 0x%x fail(%d).\n",
enable ? "enable" : "disable",
dev_name(data->dev), peri_mmuen_msk, ret);
}
}
return ret;
}
static int mtk_iommu_domain_finalise(struct mtk_iommu_domain *dom,
struct mtk_iommu_data *data,
unsigned int region_id)
{
const struct mtk_iommu_iova_region *region;
struct mtk_iommu_domain *m4u_dom;
/* Always use bank0 in sharing pgtable case */
m4u_dom = data->bank[0].m4u_dom;
if (m4u_dom) {
dom->iop = m4u_dom->iop;
dom->cfg = m4u_dom->cfg;
dom->domain.pgsize_bitmap = m4u_dom->cfg.pgsize_bitmap;
goto update_iova_region;
}
dom->cfg = (struct io_pgtable_cfg) {
.quirks = IO_PGTABLE_QUIRK_ARM_NS |
IO_PGTABLE_QUIRK_NO_PERMS |
IO_PGTABLE_QUIRK_ARM_MTK_EXT,
.pgsize_bitmap = mtk_iommu_ops.pgsize_bitmap,
.ias = MTK_IOMMU_HAS_FLAG(data->plat_data, IOVA_34_EN) ? 34 : 32,
.iommu_dev = data->dev,
};
if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_4GB_MODE))
dom->cfg.oas = data->enable_4GB ? 33 : 32;
else
dom->cfg.oas = 35;
dom->iop = alloc_io_pgtable_ops(ARM_V7S, &dom->cfg, data);
if (!dom->iop) {
dev_err(data->dev, "Failed to alloc io pgtable\n");
return -EINVAL;
}
/* Update our support page sizes bitmap */
dom->domain.pgsize_bitmap = dom->cfg.pgsize_bitmap;
update_iova_region:
/* Update the iova region for this domain */
region = data->plat_data->iova_region + region_id;
dom->domain.geometry.aperture_start = region->iova_base;
dom->domain.geometry.aperture_end = region->iova_base + region->size - 1;
dom->domain.geometry.force_aperture = true;
return 0;
}
static struct iommu_domain *mtk_iommu_domain_alloc(unsigned type)
{
struct mtk_iommu_domain *dom;
if (type != IOMMU_DOMAIN_DMA && type != IOMMU_DOMAIN_UNMANAGED)
return NULL;
dom = kzalloc(sizeof(*dom), GFP_KERNEL);
if (!dom)
return NULL;
mutex_init(&dom->mutex);
return &dom->domain;
}
static void mtk_iommu_domain_free(struct iommu_domain *domain)
{
kfree(to_mtk_domain(domain));
}
static int mtk_iommu_attach_device(struct iommu_domain *domain,
struct device *dev)
{
struct mtk_iommu_data *data = dev_iommu_priv_get(dev), *frstdata;
struct mtk_iommu_domain *dom = to_mtk_domain(domain);
struct list_head *hw_list = data->hw_list;
iommu/mediatek: Add power-domain operation In the previous SoC, the M4U HW is in the EMI power domain which is always on. the latest M4U is in the display power domain which may be turned on/off, thus we have to add pm_runtime interface for it. When the engine work, the engine always enable the power and clocks for smi-larb/smi-common, then the M4U's power will always be powered on automatically via the device link with smi-common. Note: we don't enable the M4U power in iommu_map/unmap for tlb flush. If its power already is on, of course it is ok. if the power is off, the main tlb will be reset while M4U power on, thus the tlb flush while m4u power off is unnecessary, just skip it. Therefore, we increase the ref_count for pm when pm status is ACTIVE, otherwise, skip it. Meanwhile, the tlb_flush_range is called so often, thus, update pm ref_count while the SoC has power-domain to avoid touch the dev->power.lock. and the tlb_flush_all only is called when boot, so no need check if the SoC has power-domain to keep code clean. There will be one case that pm runctime status is not expected when tlb flush. After boot, the display may call dma_alloc_attrs before it call pm_runtime_get(disp-dev), then the m4u's pm status is not active inside the dma_alloc_attrs. Since it only happens after boot, the tlb is clean at that time, I also think this is ok. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-21-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-11 11:19:01 +00:00
struct device *m4udev = data->dev;
struct mtk_iommu_bank_data *bank;
unsigned int bankid;
int ret, region_id;
region_id = mtk_iommu_get_iova_region_id(dev, data->plat_data);
if (region_id < 0)
return region_id;
bankid = mtk_iommu_get_bank_id(dev, data->plat_data);
mutex_lock(&dom->mutex);
if (!dom->bank) {
/* Data is in the frstdata in sharing pgtable case. */
frstdata = mtk_iommu_get_frst_data(hw_list);
ret = mtk_iommu_domain_finalise(dom, frstdata, region_id);
if (ret) {
mutex_unlock(&dom->mutex);
return -ENODEV;
}
dom->bank = &data->bank[bankid];
}
mutex_unlock(&dom->mutex);
mutex_lock(&data->mutex);
bank = &data->bank[bankid];
if (!bank->m4u_dom) { /* Initialize the M4U HW for each a BANK */
iommu/mediatek: Add power-domain operation In the previous SoC, the M4U HW is in the EMI power domain which is always on. the latest M4U is in the display power domain which may be turned on/off, thus we have to add pm_runtime interface for it. When the engine work, the engine always enable the power and clocks for smi-larb/smi-common, then the M4U's power will always be powered on automatically via the device link with smi-common. Note: we don't enable the M4U power in iommu_map/unmap for tlb flush. If its power already is on, of course it is ok. if the power is off, the main tlb will be reset while M4U power on, thus the tlb flush while m4u power off is unnecessary, just skip it. Therefore, we increase the ref_count for pm when pm status is ACTIVE, otherwise, skip it. Meanwhile, the tlb_flush_range is called so often, thus, update pm ref_count while the SoC has power-domain to avoid touch the dev->power.lock. and the tlb_flush_all only is called when boot, so no need check if the SoC has power-domain to keep code clean. There will be one case that pm runctime status is not expected when tlb flush. After boot, the display may call dma_alloc_attrs before it call pm_runtime_get(disp-dev), then the m4u's pm status is not active inside the dma_alloc_attrs. Since it only happens after boot, the tlb is clean at that time, I also think this is ok. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-21-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-11 11:19:01 +00:00
ret = pm_runtime_resume_and_get(m4udev);
if (ret < 0) {
dev_err(m4udev, "pm get fail(%d) in attach.\n", ret);
goto err_unlock;
}
iommu/mediatek: Add power-domain operation In the previous SoC, the M4U HW is in the EMI power domain which is always on. the latest M4U is in the display power domain which may be turned on/off, thus we have to add pm_runtime interface for it. When the engine work, the engine always enable the power and clocks for smi-larb/smi-common, then the M4U's power will always be powered on automatically via the device link with smi-common. Note: we don't enable the M4U power in iommu_map/unmap for tlb flush. If its power already is on, of course it is ok. if the power is off, the main tlb will be reset while M4U power on, thus the tlb flush while m4u power off is unnecessary, just skip it. Therefore, we increase the ref_count for pm when pm status is ACTIVE, otherwise, skip it. Meanwhile, the tlb_flush_range is called so often, thus, update pm ref_count while the SoC has power-domain to avoid touch the dev->power.lock. and the tlb_flush_all only is called when boot, so no need check if the SoC has power-domain to keep code clean. There will be one case that pm runctime status is not expected when tlb flush. After boot, the display may call dma_alloc_attrs before it call pm_runtime_get(disp-dev), then the m4u's pm status is not active inside the dma_alloc_attrs. Since it only happens after boot, the tlb is clean at that time, I also think this is ok. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-21-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-11 11:19:01 +00:00
ret = mtk_iommu_hw_init(data, bankid);
iommu/mediatek: Add power-domain operation In the previous SoC, the M4U HW is in the EMI power domain which is always on. the latest M4U is in the display power domain which may be turned on/off, thus we have to add pm_runtime interface for it. When the engine work, the engine always enable the power and clocks for smi-larb/smi-common, then the M4U's power will always be powered on automatically via the device link with smi-common. Note: we don't enable the M4U power in iommu_map/unmap for tlb flush. If its power already is on, of course it is ok. if the power is off, the main tlb will be reset while M4U power on, thus the tlb flush while m4u power off is unnecessary, just skip it. Therefore, we increase the ref_count for pm when pm status is ACTIVE, otherwise, skip it. Meanwhile, the tlb_flush_range is called so often, thus, update pm ref_count while the SoC has power-domain to avoid touch the dev->power.lock. and the tlb_flush_all only is called when boot, so no need check if the SoC has power-domain to keep code clean. There will be one case that pm runctime status is not expected when tlb flush. After boot, the display may call dma_alloc_attrs before it call pm_runtime_get(disp-dev), then the m4u's pm status is not active inside the dma_alloc_attrs. Since it only happens after boot, the tlb is clean at that time, I also think this is ok. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-21-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-11 11:19:01 +00:00
if (ret) {
pm_runtime_put(m4udev);
goto err_unlock;
iommu/mediatek: Add power-domain operation In the previous SoC, the M4U HW is in the EMI power domain which is always on. the latest M4U is in the display power domain which may be turned on/off, thus we have to add pm_runtime interface for it. When the engine work, the engine always enable the power and clocks for smi-larb/smi-common, then the M4U's power will always be powered on automatically via the device link with smi-common. Note: we don't enable the M4U power in iommu_map/unmap for tlb flush. If its power already is on, of course it is ok. if the power is off, the main tlb will be reset while M4U power on, thus the tlb flush while m4u power off is unnecessary, just skip it. Therefore, we increase the ref_count for pm when pm status is ACTIVE, otherwise, skip it. Meanwhile, the tlb_flush_range is called so often, thus, update pm ref_count while the SoC has power-domain to avoid touch the dev->power.lock. and the tlb_flush_all only is called when boot, so no need check if the SoC has power-domain to keep code clean. There will be one case that pm runctime status is not expected when tlb flush. After boot, the display may call dma_alloc_attrs before it call pm_runtime_get(disp-dev), then the m4u's pm status is not active inside the dma_alloc_attrs. Since it only happens after boot, the tlb is clean at that time, I also think this is ok. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-21-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-11 11:19:01 +00:00
}
bank->m4u_dom = dom;
writel(dom->cfg.arm_v7s_cfg.ttbr & MMU_PT_ADDR_MASK,
bank->base + REG_MMU_PT_BASE_ADDR);
iommu/mediatek: Add power-domain operation In the previous SoC, the M4U HW is in the EMI power domain which is always on. the latest M4U is in the display power domain which may be turned on/off, thus we have to add pm_runtime interface for it. When the engine work, the engine always enable the power and clocks for smi-larb/smi-common, then the M4U's power will always be powered on automatically via the device link with smi-common. Note: we don't enable the M4U power in iommu_map/unmap for tlb flush. If its power already is on, of course it is ok. if the power is off, the main tlb will be reset while M4U power on, thus the tlb flush while m4u power off is unnecessary, just skip it. Therefore, we increase the ref_count for pm when pm status is ACTIVE, otherwise, skip it. Meanwhile, the tlb_flush_range is called so often, thus, update pm ref_count while the SoC has power-domain to avoid touch the dev->power.lock. and the tlb_flush_all only is called when boot, so no need check if the SoC has power-domain to keep code clean. There will be one case that pm runctime status is not expected when tlb flush. After boot, the display may call dma_alloc_attrs before it call pm_runtime_get(disp-dev), then the m4u's pm status is not active inside the dma_alloc_attrs. Since it only happens after boot, the tlb is clean at that time, I also think this is ok. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-21-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-11 11:19:01 +00:00
pm_runtime_put(m4udev);
}
mutex_unlock(&data->mutex);
return mtk_iommu_config(data, dev, true, region_id);
err_unlock:
mutex_unlock(&data->mutex);
return ret;
}
static void mtk_iommu_detach_device(struct iommu_domain *domain,
struct device *dev)
{
struct mtk_iommu_data *data = dev_iommu_priv_get(dev);
mtk_iommu_config(data, dev, false, 0);
}
static int mtk_iommu_map(struct iommu_domain *domain, unsigned long iova,
phys_addr_t paddr, size_t size, int prot, gfp_t gfp)
{
struct mtk_iommu_domain *dom = to_mtk_domain(domain);
/* The "4GB mode" M4U physically can not use the lower remap of Dram. */
if (dom->bank->parent_data->enable_4GB)
paddr |= BIT_ULL(32);
/* Synchronize with the tlb_lock */
return dom->iop->map(dom->iop, iova, paddr, size, prot, gfp);
}
static size_t mtk_iommu_unmap(struct iommu_domain *domain,
unsigned long iova, size_t size,
struct iommu_iotlb_gather *gather)
{
struct mtk_iommu_domain *dom = to_mtk_domain(domain);
iommu_iotlb_gather_add_range(gather, iova, size);
return dom->iop->unmap(dom->iop, iova, size, gather);
}
static void mtk_iommu_flush_iotlb_all(struct iommu_domain *domain)
{
struct mtk_iommu_domain *dom = to_mtk_domain(domain);
mtk_iommu_tlb_flush_all(dom->bank->parent_data);
}
static void mtk_iommu_iotlb_sync(struct iommu_domain *domain,
struct iommu_iotlb_gather *gather)
{
struct mtk_iommu_domain *dom = to_mtk_domain(domain);
size_t length = gather->end - gather->start + 1;
mtk_iommu_tlb_flush_range_sync(gather->start, length, dom->bank);
}
static void mtk_iommu_sync_map(struct iommu_domain *domain, unsigned long iova,
size_t size)
{
struct mtk_iommu_domain *dom = to_mtk_domain(domain);
mtk_iommu_tlb_flush_range_sync(iova, size, dom->bank);
}
static phys_addr_t mtk_iommu_iova_to_phys(struct iommu_domain *domain,
dma_addr_t iova)
{
struct mtk_iommu_domain *dom = to_mtk_domain(domain);
phys_addr_t pa;
pa = dom->iop->iova_to_phys(dom->iop, iova);
if (IS_ENABLED(CONFIG_PHYS_ADDR_T_64BIT) &&
dom->bank->parent_data->enable_4GB &&
pa >= MTK_IOMMU_4GB_MODE_REMAP_BASE)
pa &= ~BIT_ULL(32);
return pa;
}
static struct iommu_device *mtk_iommu_probe_device(struct device *dev)
{
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
struct mtk_iommu_data *data;
media: iommu/mediatek: Add device_link between the consumer and the larb devices MediaTek IOMMU-SMI diagram is like below. all the consumer connect with smi-larb, then connect with smi-common. M4U | smi-common | ------------- | | ... | | larb1 larb2 | | vdec venc When the consumer works, it should enable the smi-larb's power which also need enable the smi-common's power firstly. Thus, First of all, use the device link connect the consumer and the smi-larbs. then add device link between the smi-larb and smi-common. This patch adds device_link between the consumer and the larbs. When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling pm_runtime_xx to keep the original status of clocks. It can avoid two issues: 1) Display HW show fastlogo abnormally reported in [1]. At the beggining, all the clocks are enabled before entering kernel, but the clocks for display HW(always in larb0) will be gated after clk_enable and clk_disable called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock operation happened before display driver probe. At that time, the display HW will be abnormal. 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip pm_runtime_xx to avoid the deadlock. Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then device_link_removed should be added explicitly. Meanwhile, Currently we don't have a device connect with 2 larbs at the same time. Disallow this case, print the error log. [1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/ [2] https://lore.kernel.org/patchwork/patch/1086569/ Suggested-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623 Acked-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-17 07:05:02 +00:00
struct device_link *link;
struct device *larbdev;
unsigned int larbid, larbidx, i;
if (!fwspec || fwspec->ops != &mtk_iommu_ops)
return ERR_PTR(-ENODEV); /* Not a iommu client device */
data = dev_iommu_priv_get(dev);
if (!MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_MM))
return &data->iommu;
media: iommu/mediatek: Add device_link between the consumer and the larb devices MediaTek IOMMU-SMI diagram is like below. all the consumer connect with smi-larb, then connect with smi-common. M4U | smi-common | ------------- | | ... | | larb1 larb2 | | vdec venc When the consumer works, it should enable the smi-larb's power which also need enable the smi-common's power firstly. Thus, First of all, use the device link connect the consumer and the smi-larbs. then add device link between the smi-larb and smi-common. This patch adds device_link between the consumer and the larbs. When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling pm_runtime_xx to keep the original status of clocks. It can avoid two issues: 1) Display HW show fastlogo abnormally reported in [1]. At the beggining, all the clocks are enabled before entering kernel, but the clocks for display HW(always in larb0) will be gated after clk_enable and clk_disable called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock operation happened before display driver probe. At that time, the display HW will be abnormal. 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip pm_runtime_xx to avoid the deadlock. Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then device_link_removed should be added explicitly. Meanwhile, Currently we don't have a device connect with 2 larbs at the same time. Disallow this case, print the error log. [1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/ [2] https://lore.kernel.org/patchwork/patch/1086569/ Suggested-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623 Acked-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-17 07:05:02 +00:00
/*
* Link the consumer device with the smi-larb device(supplier).
* The device that connects with each a larb is a independent HW.
* All the ports in each a device should be in the same larbs.
*/
larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
for (i = 1; i < fwspec->num_ids; i++) {
larbidx = MTK_M4U_TO_LARB(fwspec->ids[i]);
if (larbid != larbidx) {
dev_err(dev, "Can only use one larb. Fail@larb%d-%d.\n",
larbid, larbidx);
return ERR_PTR(-EINVAL);
}
}
larbdev = data->larb_imu[larbid].dev;
link = device_link_add(dev, larbdev,
DL_FLAG_PM_RUNTIME | DL_FLAG_STATELESS);
if (!link)
dev_err(dev, "Unable to link %s\n", dev_name(larbdev));
return &data->iommu;
}
static void mtk_iommu_release_device(struct device *dev)
{
struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
media: iommu/mediatek: Add device_link between the consumer and the larb devices MediaTek IOMMU-SMI diagram is like below. all the consumer connect with smi-larb, then connect with smi-common. M4U | smi-common | ------------- | | ... | | larb1 larb2 | | vdec venc When the consumer works, it should enable the smi-larb's power which also need enable the smi-common's power firstly. Thus, First of all, use the device link connect the consumer and the smi-larbs. then add device link between the smi-larb and smi-common. This patch adds device_link between the consumer and the larbs. When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling pm_runtime_xx to keep the original status of clocks. It can avoid two issues: 1) Display HW show fastlogo abnormally reported in [1]. At the beggining, all the clocks are enabled before entering kernel, but the clocks for display HW(always in larb0) will be gated after clk_enable and clk_disable called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock operation happened before display driver probe. At that time, the display HW will be abnormal. 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip pm_runtime_xx to avoid the deadlock. Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then device_link_removed should be added explicitly. Meanwhile, Currently we don't have a device connect with 2 larbs at the same time. Disallow this case, print the error log. [1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/ [2] https://lore.kernel.org/patchwork/patch/1086569/ Suggested-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623 Acked-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-17 07:05:02 +00:00
struct mtk_iommu_data *data;
struct device *larbdev;
unsigned int larbid;
if (!fwspec || fwspec->ops != &mtk_iommu_ops)
return;
media: iommu/mediatek: Add device_link between the consumer and the larb devices MediaTek IOMMU-SMI diagram is like below. all the consumer connect with smi-larb, then connect with smi-common. M4U | smi-common | ------------- | | ... | | larb1 larb2 | | vdec venc When the consumer works, it should enable the smi-larb's power which also need enable the smi-common's power firstly. Thus, First of all, use the device link connect the consumer and the smi-larbs. then add device link between the smi-larb and smi-common. This patch adds device_link between the consumer and the larbs. When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling pm_runtime_xx to keep the original status of clocks. It can avoid two issues: 1) Display HW show fastlogo abnormally reported in [1]. At the beggining, all the clocks are enabled before entering kernel, but the clocks for display HW(always in larb0) will be gated after clk_enable and clk_disable called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock operation happened before display driver probe. At that time, the display HW will be abnormal. 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip pm_runtime_xx to avoid the deadlock. Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then device_link_removed should be added explicitly. Meanwhile, Currently we don't have a device connect with 2 larbs at the same time. Disallow this case, print the error log. [1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/ [2] https://lore.kernel.org/patchwork/patch/1086569/ Suggested-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623 Acked-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-17 07:05:02 +00:00
data = dev_iommu_priv_get(dev);
if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_MM)) {
larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
larbdev = data->larb_imu[larbid].dev;
device_link_remove(dev, larbdev);
}
media: iommu/mediatek: Add device_link between the consumer and the larb devices MediaTek IOMMU-SMI diagram is like below. all the consumer connect with smi-larb, then connect with smi-common. M4U | smi-common | ------------- | | ... | | larb1 larb2 | | vdec venc When the consumer works, it should enable the smi-larb's power which also need enable the smi-common's power firstly. Thus, First of all, use the device link connect the consumer and the smi-larbs. then add device link between the smi-larb and smi-common. This patch adds device_link between the consumer and the larbs. When device_link_add, I add the flag DL_FLAG_STATELESS to avoid calling pm_runtime_xx to keep the original status of clocks. It can avoid two issues: 1) Display HW show fastlogo abnormally reported in [1]. At the beggining, all the clocks are enabled before entering kernel, but the clocks for display HW(always in larb0) will be gated after clk_enable and clk_disable called from device_link_add(->pm_runtime_resume) and rpm_idle. The clock operation happened before display driver probe. At that time, the display HW will be abnormal. 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to skip pm_runtime_xx to avoid the deadlock. Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then device_link_removed should be added explicitly. Meanwhile, Currently we don't have a device connect with 2 larbs at the same time. Disallow this case, print the error log. [1] https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/ [2] https://lore.kernel.org/patchwork/patch/1086569/ Suggested-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Yong Wu <yong.wu@mediatek.com> Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623 Acked-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-17 07:05:02 +00:00
iommu_fwspec_free(dev);
}
static int mtk_iommu_get_group_id(struct device *dev, const struct mtk_iommu_plat_data *plat_data)
{
unsigned int bankid;
/*
* If the bank function is enabled, each bank is a iommu group/domain.
* Otherwise, each iova region is a iommu group/domain.
*/
bankid = mtk_iommu_get_bank_id(dev, plat_data);
if (bankid)
return bankid;
return mtk_iommu_get_iova_region_id(dev, plat_data);
}
static struct iommu_group *mtk_iommu_device_group(struct device *dev)
{
struct mtk_iommu_data *c_data = dev_iommu_priv_get(dev), *data;
struct list_head *hw_list = c_data->hw_list;
struct iommu_group *group;
int groupid;
data = mtk_iommu_get_frst_data(hw_list);
if (!data)
return ERR_PTR(-ENODEV);
groupid = mtk_iommu_get_group_id(dev, data->plat_data);
if (groupid < 0)
return ERR_PTR(groupid);
mutex_lock(&data->mutex);
group = data->m4u_group[groupid];
if (!group) {
group = iommu_group_alloc();
if (!IS_ERR(group))
data->m4u_group[groupid] = group;
} else {
iommu_group_ref_get(group);
}
mutex_unlock(&data->mutex);
return group;
}
static int mtk_iommu_of_xlate(struct device *dev, struct of_phandle_args *args)
{
struct platform_device *m4updev;
if (args->args_count != 1) {
dev_err(dev, "invalid #iommu-cells(%d) property for IOMMU\n",
args->args_count);
return -EINVAL;
}
if (!dev_iommu_priv_get(dev)) {
/* Get the m4u device */
m4updev = of_find_device_by_node(args->np);
if (WARN_ON(!m4updev))
return -EINVAL;
dev_iommu_priv_set(dev, platform_get_drvdata(m4updev));
}
return iommu_fwspec_add_ids(dev, args->args, 1);
}
static void mtk_iommu_get_resv_regions(struct device *dev,
struct list_head *head)
{
struct mtk_iommu_data *data = dev_iommu_priv_get(dev);
unsigned int regionid = mtk_iommu_get_iova_region_id(dev, data->plat_data), i;
const struct mtk_iommu_iova_region *resv, *curdom;
struct iommu_resv_region *region;
int prot = IOMMU_WRITE | IOMMU_READ;
if ((int)regionid < 0)
return;
curdom = data->plat_data->iova_region + regionid;
for (i = 0; i < data->plat_data->iova_region_nr; i++) {
resv = data->plat_data->iova_region + i;
/* Only reserve when the region is inside the current domain */
if (resv->iova_base <= curdom->iova_base ||
resv->iova_base + resv->size >= curdom->iova_base + curdom->size)
continue;
region = iommu_alloc_resv_region(resv->iova_base, resv->size,
prot, IOMMU_RESV_RESERVED);
if (!region)
return;
list_add_tail(&region->list, head);
}
}
static const struct iommu_ops mtk_iommu_ops = {
.domain_alloc = mtk_iommu_domain_alloc,
.probe_device = mtk_iommu_probe_device,
.release_device = mtk_iommu_release_device,
.device_group = mtk_iommu_device_group,
.of_xlate = mtk_iommu_of_xlate,
.get_resv_regions = mtk_iommu_get_resv_regions,
.put_resv_regions = generic_iommu_put_resv_regions,
.pgsize_bitmap = SZ_4K | SZ_64K | SZ_1M | SZ_16M,
.owner = THIS_MODULE,
.default_domain_ops = &(const struct iommu_domain_ops) {
.attach_dev = mtk_iommu_attach_device,
.detach_dev = mtk_iommu_detach_device,
.map = mtk_iommu_map,
.unmap = mtk_iommu_unmap,
.flush_iotlb_all = mtk_iommu_flush_iotlb_all,
.iotlb_sync = mtk_iommu_iotlb_sync,
.iotlb_sync_map = mtk_iommu_sync_map,
.iova_to_phys = mtk_iommu_iova_to_phys,
.free = mtk_iommu_domain_free,
}
};
static int mtk_iommu_hw_init(const struct mtk_iommu_data *data, unsigned int bankid)
{
const struct mtk_iommu_bank_data *bankx = &data->bank[bankid];
const struct mtk_iommu_bank_data *bank0 = &data->bank[0];
u32 regval;
/*
* Global control settings are in bank0. May re-init these global registers
* since no sure if there is bank0 consumers.
*/
if (data->plat_data->m4u_plat == M4U_MT8173) {
regval = F_MMU_PREFETCH_RT_REPLACE_MOD |
F_MMU_TF_PROT_TO_PROGRAM_ADDR_MT8173;
} else {
regval = readl_relaxed(bank0->base + REG_MMU_CTRL_REG);
regval |= F_MMU_TF_PROT_TO_PROGRAM_ADDR;
}
writel_relaxed(regval, bank0->base + REG_MMU_CTRL_REG);
if (data->enable_4GB &&
MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_VLD_PA_RNG)) {
/*
* If 4GB mode is enabled, the validate PA range is from
* 0x1_0000_0000 to 0x1_ffff_ffff. here record bit[32:30].
*/
regval = F_MMU_VLD_PA_RNG(7, 4);
writel_relaxed(regval, bank0->base + REG_MMU_VLD_PA_RNG);
}
if (MTK_IOMMU_HAS_FLAG(data->plat_data, DCM_DISABLE))
writel_relaxed(F_MMU_DCM, bank0->base + REG_MMU_DCM_DIS);
else
writel_relaxed(0, bank0->base + REG_MMU_DCM_DIS);
if (MTK_IOMMU_HAS_FLAG(data->plat_data, WR_THROT_EN)) {
/* write command throttling mode */
regval = readl_relaxed(bank0->base + REG_MMU_WR_LEN_CTRL);
regval &= ~F_MMU_WR_THROT_DIS_MASK;
writel_relaxed(regval, bank0->base + REG_MMU_WR_LEN_CTRL);
}
if (MTK_IOMMU_HAS_FLAG(data->plat_data, RESET_AXI)) {
/* The register is called STANDARD_AXI_MODE in this case */
regval = 0;
} else {
regval = readl_relaxed(bank0->base + REG_MMU_MISC_CTRL);
if (!MTK_IOMMU_HAS_FLAG(data->plat_data, STD_AXI_MODE))
regval &= ~F_MMU_STANDARD_AXI_MODE_MASK;
if (MTK_IOMMU_HAS_FLAG(data->plat_data, OUT_ORDER_WR_EN))
regval &= ~F_MMU_IN_ORDER_WR_EN_MASK;
}
writel_relaxed(regval, bank0->base + REG_MMU_MISC_CTRL);
/* Independent settings for each bank */
regval = F_L2_MULIT_HIT_EN |
F_TABLE_WALK_FAULT_INT_EN |
F_PREETCH_FIFO_OVERFLOW_INT_EN |
F_MISS_FIFO_OVERFLOW_INT_EN |
F_PREFETCH_FIFO_ERR_INT_EN |
F_MISS_FIFO_ERR_INT_EN;
writel_relaxed(regval, bankx->base + REG_MMU_INT_CONTROL0);
regval = F_INT_TRANSLATION_FAULT |
F_INT_MAIN_MULTI_HIT_FAULT |
F_INT_INVALID_PA_FAULT |
F_INT_ENTRY_REPLACEMENT_FAULT |
F_INT_TLB_MISS_FAULT |
F_INT_MISS_TRANSACTION_FIFO_FAULT |
F_INT_PRETETCH_TRANSATION_FIFO_FAULT;
writel_relaxed(regval, bankx->base + REG_MMU_INT_MAIN_CONTROL);
if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_LEGACY_IVRP_PADDR))
regval = (data->protect_base >> 1) | (data->enable_4GB << 31);
else
regval = lower_32_bits(data->protect_base) |
upper_32_bits(data->protect_base);
writel_relaxed(regval, bankx->base + REG_MMU_IVRP_PADDR);
if (devm_request_irq(bankx->parent_dev, bankx->irq, mtk_iommu_isr, 0,
dev_name(bankx->parent_dev), (void *)bankx)) {
writel_relaxed(0, bankx->base + REG_MMU_PT_BASE_ADDR);
dev_err(bankx->parent_dev, "Failed @ IRQ-%d Request\n", bankx->irq);
return -ENODEV;
}
return 0;
}
static const struct component_master_ops mtk_iommu_com_ops = {
.bind = mtk_iommu_bind,
.unbind = mtk_iommu_unbind,
};
static int mtk_iommu_mm_dts_parse(struct device *dev, struct component_match **match,
struct mtk_iommu_data *data)
{
struct device_node *larbnode, *smicomm_node, *smi_subcomm_node;
struct platform_device *plarbdev;
struct device_link *link;
int i, larb_nr, ret;
larb_nr = of_count_phandle_with_args(dev->of_node, "mediatek,larbs", NULL);
if (larb_nr < 0)
return larb_nr;
for (i = 0; i < larb_nr; i++) {
u32 id;
larbnode = of_parse_phandle(dev->of_node, "mediatek,larbs", i);
if (!larbnode)
return -EINVAL;
if (!of_device_is_available(larbnode)) {
of_node_put(larbnode);
continue;
}
ret = of_property_read_u32(larbnode, "mediatek,larb-id", &id);
if (ret)/* The id is consecutive if there is no this property */
id = i;
plarbdev = of_find_device_by_node(larbnode);
if (!plarbdev) {
of_node_put(larbnode);
return -ENODEV;
}
if (!plarbdev->dev.driver) {
of_node_put(larbnode);
return -EPROBE_DEFER;
}
data->larb_imu[id].dev = &plarbdev->dev;
component_match_add_release(dev, match, component_release_of,
component_compare_of, larbnode);
}
/* Get smi-(sub)-common dev from the last larb. */
smi_subcomm_node = of_parse_phandle(larbnode, "mediatek,smi", 0);
if (!smi_subcomm_node)
return -EINVAL;
/*
* It may have two level smi-common. the node is smi-sub-common if it
* has a new mediatek,smi property. otherwise it is smi-commmon.
*/
smicomm_node = of_parse_phandle(smi_subcomm_node, "mediatek,smi", 0);
if (smicomm_node)
of_node_put(smi_subcomm_node);
else
smicomm_node = smi_subcomm_node;
plarbdev = of_find_device_by_node(smicomm_node);
of_node_put(smicomm_node);
data->smicomm_dev = &plarbdev->dev;
link = device_link_add(data->smicomm_dev, dev,
DL_FLAG_STATELESS | DL_FLAG_PM_RUNTIME);
if (!link) {
dev_err(dev, "Unable to link %s.\n", dev_name(data->smicomm_dev));
return -EINVAL;
}
return 0;
}
static int mtk_iommu_probe(struct platform_device *pdev)
{
struct mtk_iommu_data *data;
struct device *dev = &pdev->dev;
struct resource *res;
resource_size_t ioaddr;
struct component_match *match = NULL;
struct regmap *infracfg;
void *protect;
int ret, banks_num, i = 0;
u32 val;
char *p;
struct mtk_iommu_bank_data *bank;
void __iomem *base;
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
data->dev = dev;
data->plat_data = of_device_get_match_data(dev);
/* Protect memory. HW will access here while translation fault.*/
protect = devm_kzalloc(dev, MTK_PROTECT_PA_ALIGN * 2, GFP_KERNEL);
if (!protect)
return -ENOMEM;
data->protect_base = ALIGN(virt_to_phys(protect), MTK_PROTECT_PA_ALIGN);
if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_4GB_MODE)) {
switch (data->plat_data->m4u_plat) {
case M4U_MT2712:
p = "mediatek,mt2712-infracfg";
break;
case M4U_MT8173:
p = "mediatek,mt8173-infracfg";
break;
default:
p = NULL;
}
infracfg = syscon_regmap_lookup_by_compatible(p);
if (IS_ERR(infracfg))
return PTR_ERR(infracfg);
ret = regmap_read(infracfg, REG_INFRA_MISC, &val);
if (ret)
return ret;
data->enable_4GB = !!(val & F_DDR_4GB_SUPPORT_EN);
}
banks_num = data->plat_data->banks_num;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (resource_size(res) < banks_num * MTK_IOMMU_BANK_SZ) {
dev_err(dev, "banknr %d. res %pR is not enough.\n", banks_num, res);
return -EINVAL;
}
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base))
return PTR_ERR(base);
ioaddr = res->start;
data->bank = devm_kmalloc(dev, banks_num * sizeof(*data->bank), GFP_KERNEL);
if (!data->bank)
return -ENOMEM;
do {
if (!data->plat_data->banks_enable[i])
continue;
bank = &data->bank[i];
bank->id = i;
bank->base = base + i * MTK_IOMMU_BANK_SZ;
bank->m4u_dom = NULL;
bank->irq = platform_get_irq(pdev, i);
if (bank->irq < 0)
return bank->irq;
bank->parent_dev = dev;
bank->parent_data = data;
spin_lock_init(&bank->tlb_lock);
} while (++i < banks_num);
if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_BCLK)) {
data->bclk = devm_clk_get(dev, "bclk");
if (IS_ERR(data->bclk))
return PTR_ERR(data->bclk);
}
iommu/mediatek: Add power-domain operation In the previous SoC, the M4U HW is in the EMI power domain which is always on. the latest M4U is in the display power domain which may be turned on/off, thus we have to add pm_runtime interface for it. When the engine work, the engine always enable the power and clocks for smi-larb/smi-common, then the M4U's power will always be powered on automatically via the device link with smi-common. Note: we don't enable the M4U power in iommu_map/unmap for tlb flush. If its power already is on, of course it is ok. if the power is off, the main tlb will be reset while M4U power on, thus the tlb flush while m4u power off is unnecessary, just skip it. Therefore, we increase the ref_count for pm when pm status is ACTIVE, otherwise, skip it. Meanwhile, the tlb_flush_range is called so often, thus, update pm ref_count while the SoC has power-domain to avoid touch the dev->power.lock. and the tlb_flush_all only is called when boot, so no need check if the SoC has power-domain to keep code clean. There will be one case that pm runctime status is not expected when tlb flush. After boot, the display may call dma_alloc_attrs before it call pm_runtime_get(disp-dev), then the m4u's pm status is not active inside the dma_alloc_attrs. Since it only happens after boot, the tlb is clean at that time, I also think this is ok. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-21-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-11 11:19:01 +00:00
pm_runtime_enable(dev);
if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_MM)) {
ret = mtk_iommu_mm_dts_parse(dev, &match, data);
if (ret) {
dev_err(dev, "mm dts parse fail(%d).", ret);
goto out_runtime_disable;
}
} else if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_INFRA) &&
data->plat_data->pericfg_comp_str) {
infracfg = syscon_regmap_lookup_by_compatible(data->plat_data->pericfg_comp_str);
if (IS_ERR(infracfg)) {
ret = PTR_ERR(infracfg);
goto out_runtime_disable;
}
data->pericfg = infracfg;
}
platform_set_drvdata(pdev, data);
mutex_init(&data->mutex);
ret = iommu_device_sysfs_add(&data->iommu, dev, NULL,
"mtk-iommu.%pa", &ioaddr);
if (ret)
goto out_link_remove;
ret = iommu_device_register(&data->iommu, &mtk_iommu_ops, dev);
if (ret)
goto out_sysfs_remove;
if (MTK_IOMMU_HAS_FLAG(data->plat_data, SHARE_PGTABLE)) {
list_add_tail(&data->list, data->plat_data->hw_list);
data->hw_list = data->plat_data->hw_list;
} else {
INIT_LIST_HEAD(&data->hw_list_head);
list_add_tail(&data->list, &data->hw_list_head);
data->hw_list = &data->hw_list_head;
}
if (!iommu_present(&platform_bus_type)) {
ret = bus_set_iommu(&platform_bus_type, &mtk_iommu_ops);
if (ret)
goto out_list_del;
}
if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_MM)) {
ret = component_master_add_with_match(dev, &mtk_iommu_com_ops, match);
if (ret)
goto out_bus_set_null;
} else if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_INFRA) &&
MTK_IOMMU_HAS_FLAG(data->plat_data, IFA_IOMMU_PCIE_SUPPORT)) {
#ifdef CONFIG_PCI
if (!iommu_present(&pci_bus_type)) {
ret = bus_set_iommu(&pci_bus_type, &mtk_iommu_ops);
if (ret) /* PCIe fail don't affect platform_bus. */
goto out_list_del;
}
#endif
}
return ret;
out_bus_set_null:
bus_set_iommu(&platform_bus_type, NULL);
out_list_del:
list_del(&data->list);
iommu_device_unregister(&data->iommu);
out_sysfs_remove:
iommu_device_sysfs_remove(&data->iommu);
out_link_remove:
if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_MM))
device_link_remove(data->smicomm_dev, dev);
iommu/mediatek: Add power-domain operation In the previous SoC, the M4U HW is in the EMI power domain which is always on. the latest M4U is in the display power domain which may be turned on/off, thus we have to add pm_runtime interface for it. When the engine work, the engine always enable the power and clocks for smi-larb/smi-common, then the M4U's power will always be powered on automatically via the device link with smi-common. Note: we don't enable the M4U power in iommu_map/unmap for tlb flush. If its power already is on, of course it is ok. if the power is off, the main tlb will be reset while M4U power on, thus the tlb flush while m4u power off is unnecessary, just skip it. Therefore, we increase the ref_count for pm when pm status is ACTIVE, otherwise, skip it. Meanwhile, the tlb_flush_range is called so often, thus, update pm ref_count while the SoC has power-domain to avoid touch the dev->power.lock. and the tlb_flush_all only is called when boot, so no need check if the SoC has power-domain to keep code clean. There will be one case that pm runctime status is not expected when tlb flush. After boot, the display may call dma_alloc_attrs before it call pm_runtime_get(disp-dev), then the m4u's pm status is not active inside the dma_alloc_attrs. Since it only happens after boot, the tlb is clean at that time, I also think this is ok. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-21-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-11 11:19:01 +00:00
out_runtime_disable:
pm_runtime_disable(dev);
return ret;
}
static int mtk_iommu_remove(struct platform_device *pdev)
{
struct mtk_iommu_data *data = platform_get_drvdata(pdev);
struct mtk_iommu_bank_data *bank;
int i;
iommu_device_sysfs_remove(&data->iommu);
iommu_device_unregister(&data->iommu);
list_del(&data->list);
if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_MM)) {
device_link_remove(data->smicomm_dev, &pdev->dev);
component_master_del(&pdev->dev, &mtk_iommu_com_ops);
} else if (MTK_IOMMU_IS_TYPE(data->plat_data, MTK_IOMMU_TYPE_INFRA) &&
MTK_IOMMU_HAS_FLAG(data->plat_data, IFA_IOMMU_PCIE_SUPPORT)) {
#ifdef CONFIG_PCI
bus_set_iommu(&pci_bus_type, NULL);
#endif
}
iommu/mediatek: Add power-domain operation In the previous SoC, the M4U HW is in the EMI power domain which is always on. the latest M4U is in the display power domain which may be turned on/off, thus we have to add pm_runtime interface for it. When the engine work, the engine always enable the power and clocks for smi-larb/smi-common, then the M4U's power will always be powered on automatically via the device link with smi-common. Note: we don't enable the M4U power in iommu_map/unmap for tlb flush. If its power already is on, of course it is ok. if the power is off, the main tlb will be reset while M4U power on, thus the tlb flush while m4u power off is unnecessary, just skip it. Therefore, we increase the ref_count for pm when pm status is ACTIVE, otherwise, skip it. Meanwhile, the tlb_flush_range is called so often, thus, update pm ref_count while the SoC has power-domain to avoid touch the dev->power.lock. and the tlb_flush_all only is called when boot, so no need check if the SoC has power-domain to keep code clean. There will be one case that pm runctime status is not expected when tlb flush. After boot, the display may call dma_alloc_attrs before it call pm_runtime_get(disp-dev), then the m4u's pm status is not active inside the dma_alloc_attrs. Since it only happens after boot, the tlb is clean at that time, I also think this is ok. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20210111111914.22211-21-yong.wu@mediatek.com Signed-off-by: Will Deacon <will@kernel.org>
2021-01-11 11:19:01 +00:00
pm_runtime_disable(&pdev->dev);
for (i = 0; i < data->plat_data->banks_num; i++) {
bank = &data->bank[i];
if (!bank->m4u_dom)
continue;
devm_free_irq(&pdev->dev, bank->irq, bank);
}
return 0;
}
static int __maybe_unused mtk_iommu_runtime_suspend(struct device *dev)
{
struct mtk_iommu_data *data = dev_get_drvdata(dev);
struct mtk_iommu_suspend_reg *reg = &data->reg;
void __iomem *base;
int i = 0;
base = data->bank[i].base;
reg->wr_len_ctrl = readl_relaxed(base + REG_MMU_WR_LEN_CTRL);
reg->misc_ctrl = readl_relaxed(base + REG_MMU_MISC_CTRL);
reg->dcm_dis = readl_relaxed(base + REG_MMU_DCM_DIS);
reg->ctrl_reg = readl_relaxed(base + REG_MMU_CTRL_REG);
reg->vld_pa_rng = readl_relaxed(base + REG_MMU_VLD_PA_RNG);
do {
if (!data->plat_data->banks_enable[i])
continue;
base = data->bank[i].base;
reg->int_control[i] = readl_relaxed(base + REG_MMU_INT_CONTROL0);
reg->int_main_control[i] = readl_relaxed(base + REG_MMU_INT_MAIN_CONTROL);
reg->ivrp_paddr[i] = readl_relaxed(base + REG_MMU_IVRP_PADDR);
} while (++i < data->plat_data->banks_num);
clk_disable_unprepare(data->bclk);
return 0;
}
static int __maybe_unused mtk_iommu_runtime_resume(struct device *dev)
{
struct mtk_iommu_data *data = dev_get_drvdata(dev);
struct mtk_iommu_suspend_reg *reg = &data->reg;
struct mtk_iommu_domain *m4u_dom;
void __iomem *base;
int ret, i = 0;
ret = clk_prepare_enable(data->bclk);
if (ret) {
dev_err(data->dev, "Failed to enable clk(%d) in resume\n", ret);
return ret;
}
iommu/mediatek: Always enable the clk on resume In mtk_iommu_runtime_resume always enable the clk, even if m4u_dom is null. Otherwise the 'suspend' cb might disable the clk which is already disabled causing the warning: [ 1.586104] infra_m4u already disabled [ 1.586133] WARNING: CPU: 0 PID: 121 at drivers/clk/clk.c:952 clk_core_disable+0xb0/0xb8 [ 1.594391] mtk-iommu 10205000.iommu: bound 18001000.larb (ops mtk_smi_larb_component_ops) [ 1.598108] Modules linked in: [ 1.598114] CPU: 0 PID: 121 Comm: kworker/0:2 Not tainted 5.12.0-rc5 #69 [ 1.609246] mtk-iommu 10205000.iommu: bound 14027000.larb (ops mtk_smi_larb_component_ops) [ 1.617487] Hardware name: Google Elm (DT) [ 1.617491] Workqueue: pm pm_runtime_work [ 1.620545] mtk-iommu 10205000.iommu: bound 19001000.larb (ops mtk_smi_larb_component_ops) [ 1.627229] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--) [ 1.659297] pc : clk_core_disable+0xb0/0xb8 [ 1.663475] lr : clk_core_disable+0xb0/0xb8 [ 1.667652] sp : ffff800011b9bbe0 [ 1.670959] x29: ffff800011b9bbe0 x28: 0000000000000000 [ 1.676267] x27: ffff800011448000 x26: ffff8000100cfd98 [ 1.681574] x25: ffff800011b9bd48 x24: 0000000000000000 [ 1.686882] x23: 0000000000000000 x22: ffff8000106fad90 [ 1.692189] x21: 000000000000000a x20: ffff0000c0048500 [ 1.697496] x19: ffff0000c0048500 x18: ffffffffffffffff [ 1.702804] x17: 0000000000000000 x16: 0000000000000000 [ 1.708112] x15: ffff800011460300 x14: fffffffffffe0000 [ 1.713420] x13: ffff8000114602d8 x12: 0720072007200720 [ 1.718727] x11: 0720072007200720 x10: 0720072007200720 [ 1.724035] x9 : ffff800011b9bbe0 x8 : ffff800011b9bbe0 [ 1.729342] x7 : 0000000000000009 x6 : ffff8000114b8328 [ 1.734649] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.739956] x3 : 00000000ffffffff x2 : ffff800011460298 [ 1.745263] x1 : 1af1d7de276f4500 x0 : 0000000000000000 [ 1.750572] Call trace: [ 1.753010] clk_core_disable+0xb0/0xb8 [ 1.756840] clk_core_disable_lock+0x24/0x40 [ 1.761105] clk_disable+0x20/0x30 [ 1.764501] mtk_iommu_runtime_suspend+0x88/0xa8 [ 1.769114] pm_generic_runtime_suspend+0x2c/0x48 [ 1.773815] __rpm_callback+0xe0/0x178 [ 1.777559] rpm_callback+0x24/0x88 [ 1.781041] rpm_suspend+0xdc/0x470 [ 1.784523] rpm_idle+0x12c/0x170 [ 1.787831] pm_runtime_work+0xa8/0xc0 [ 1.791573] process_one_work+0x1e8/0x360 [ 1.795580] worker_thread+0x44/0x478 [ 1.799237] kthread+0x150/0x158 [ 1.802460] ret_from_fork+0x10/0x30 [ 1.806034] ---[ end trace 82402920ef64573b ]--- [ 1.810728] ------------[ cut here ]------------ In addition, we now don't need to enable the clock from the function mtk_iommu_hw_init since it is already enabled by the resume. Fixes: c0b57581b73b ("iommu/mediatek: Add power-domain operation") Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/20210416105449.4744-1-dafna.hirschfeld@collabora.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-16 10:54:49 +00:00
/*
* Uppon first resume, only enable the clk and return, since the values of the
* registers are not yet set.
*/
if (!reg->wr_len_ctrl)
iommu/mediatek: Always enable the clk on resume In mtk_iommu_runtime_resume always enable the clk, even if m4u_dom is null. Otherwise the 'suspend' cb might disable the clk which is already disabled causing the warning: [ 1.586104] infra_m4u already disabled [ 1.586133] WARNING: CPU: 0 PID: 121 at drivers/clk/clk.c:952 clk_core_disable+0xb0/0xb8 [ 1.594391] mtk-iommu 10205000.iommu: bound 18001000.larb (ops mtk_smi_larb_component_ops) [ 1.598108] Modules linked in: [ 1.598114] CPU: 0 PID: 121 Comm: kworker/0:2 Not tainted 5.12.0-rc5 #69 [ 1.609246] mtk-iommu 10205000.iommu: bound 14027000.larb (ops mtk_smi_larb_component_ops) [ 1.617487] Hardware name: Google Elm (DT) [ 1.617491] Workqueue: pm pm_runtime_work [ 1.620545] mtk-iommu 10205000.iommu: bound 19001000.larb (ops mtk_smi_larb_component_ops) [ 1.627229] pstate: 60000085 (nZCv daIf -PAN -UAO -TCO BTYPE=--) [ 1.659297] pc : clk_core_disable+0xb0/0xb8 [ 1.663475] lr : clk_core_disable+0xb0/0xb8 [ 1.667652] sp : ffff800011b9bbe0 [ 1.670959] x29: ffff800011b9bbe0 x28: 0000000000000000 [ 1.676267] x27: ffff800011448000 x26: ffff8000100cfd98 [ 1.681574] x25: ffff800011b9bd48 x24: 0000000000000000 [ 1.686882] x23: 0000000000000000 x22: ffff8000106fad90 [ 1.692189] x21: 000000000000000a x20: ffff0000c0048500 [ 1.697496] x19: ffff0000c0048500 x18: ffffffffffffffff [ 1.702804] x17: 0000000000000000 x16: 0000000000000000 [ 1.708112] x15: ffff800011460300 x14: fffffffffffe0000 [ 1.713420] x13: ffff8000114602d8 x12: 0720072007200720 [ 1.718727] x11: 0720072007200720 x10: 0720072007200720 [ 1.724035] x9 : ffff800011b9bbe0 x8 : ffff800011b9bbe0 [ 1.729342] x7 : 0000000000000009 x6 : ffff8000114b8328 [ 1.734649] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.739956] x3 : 00000000ffffffff x2 : ffff800011460298 [ 1.745263] x1 : 1af1d7de276f4500 x0 : 0000000000000000 [ 1.750572] Call trace: [ 1.753010] clk_core_disable+0xb0/0xb8 [ 1.756840] clk_core_disable_lock+0x24/0x40 [ 1.761105] clk_disable+0x20/0x30 [ 1.764501] mtk_iommu_runtime_suspend+0x88/0xa8 [ 1.769114] pm_generic_runtime_suspend+0x2c/0x48 [ 1.773815] __rpm_callback+0xe0/0x178 [ 1.777559] rpm_callback+0x24/0x88 [ 1.781041] rpm_suspend+0xdc/0x470 [ 1.784523] rpm_idle+0x12c/0x170 [ 1.787831] pm_runtime_work+0xa8/0xc0 [ 1.791573] process_one_work+0x1e8/0x360 [ 1.795580] worker_thread+0x44/0x478 [ 1.799237] kthread+0x150/0x158 [ 1.802460] ret_from_fork+0x10/0x30 [ 1.806034] ---[ end trace 82402920ef64573b ]--- [ 1.810728] ------------[ cut here ]------------ In addition, we now don't need to enable the clock from the function mtk_iommu_hw_init since it is already enabled by the resume. Fixes: c0b57581b73b ("iommu/mediatek: Add power-domain operation") Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/20210416105449.4744-1-dafna.hirschfeld@collabora.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-04-16 10:54:49 +00:00
return 0;
base = data->bank[i].base;
writel_relaxed(reg->wr_len_ctrl, base + REG_MMU_WR_LEN_CTRL);
writel_relaxed(reg->misc_ctrl, base + REG_MMU_MISC_CTRL);
writel_relaxed(reg->dcm_dis, base + REG_MMU_DCM_DIS);
writel_relaxed(reg->ctrl_reg, base + REG_MMU_CTRL_REG);
writel_relaxed(reg->vld_pa_rng, base + REG_MMU_VLD_PA_RNG);
do {
m4u_dom = data->bank[i].m4u_dom;
if (!data->plat_data->banks_enable[i] || !m4u_dom)
continue;
base = data->bank[i].base;
writel_relaxed(reg->int_control[i], base + REG_MMU_INT_CONTROL0);
writel_relaxed(reg->int_main_control[i], base + REG_MMU_INT_MAIN_CONTROL);
writel_relaxed(reg->ivrp_paddr[i], base + REG_MMU_IVRP_PADDR);
writel(m4u_dom->cfg.arm_v7s_cfg.ttbr & MMU_PT_ADDR_MASK,
base + REG_MMU_PT_BASE_ADDR);
} while (++i < data->plat_data->banks_num);
/*
* Users may allocate dma buffer before they call pm_runtime_get,
* in which case it will lack the necessary tlb flush.
* Thus, make sure to update the tlb after each PM resume.
*/
mtk_iommu_tlb_flush_all(data);
return 0;
}
static const struct dev_pm_ops mtk_iommu_pm_ops = {
SET_RUNTIME_PM_OPS(mtk_iommu_runtime_suspend, mtk_iommu_runtime_resume, NULL)
SET_LATE_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
pm_runtime_force_resume)
};
static const struct mtk_iommu_plat_data mt2712_data = {
.m4u_plat = M4U_MT2712,
.flags = HAS_4GB_MODE | HAS_BCLK | HAS_VLD_PA_RNG | SHARE_PGTABLE |
MTK_IOMMU_TYPE_MM,
.hw_list = &m4ulist,
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
.iova_region = single_domain,
.banks_num = 1,
.banks_enable = {true},
.iova_region_nr = ARRAY_SIZE(single_domain),
.larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}, {6}, {7}},
};
static const struct mtk_iommu_plat_data mt6779_data = {
.m4u_plat = M4U_MT6779,
.flags = HAS_SUB_COMM_2BITS | OUT_ORDER_WR_EN | WR_THROT_EN |
MTK_IOMMU_TYPE_MM,
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
.banks_num = 1,
.banks_enable = {true},
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
.larbid_remap = {{0}, {1}, {2}, {3}, {5}, {7, 8}, {10}, {9}},
};
static const struct mtk_iommu_plat_data mt8167_data = {
.m4u_plat = M4U_MT8167,
.flags = RESET_AXI | HAS_LEGACY_IVRP_PADDR | MTK_IOMMU_TYPE_MM,
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
.banks_num = 1,
.banks_enable = {true},
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
.larbid_remap = {{0}, {1}, {2}}, /* Linear mapping. */
};
static const struct mtk_iommu_plat_data mt8173_data = {
.m4u_plat = M4U_MT8173,
.flags = HAS_4GB_MODE | HAS_BCLK | RESET_AXI |
HAS_LEGACY_IVRP_PADDR | MTK_IOMMU_TYPE_MM,
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
.banks_num = 1,
.banks_enable = {true},
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
.larbid_remap = {{0}, {1}, {2}, {3}, {4}, {5}}, /* Linear mapping. */
};
static const struct mtk_iommu_plat_data mt8183_data = {
.m4u_plat = M4U_MT8183,
.flags = RESET_AXI | MTK_IOMMU_TYPE_MM,
.inv_sel_reg = REG_MMU_INV_SEL_GEN1,
.banks_num = 1,
.banks_enable = {true},
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
.larbid_remap = {{0}, {4}, {5}, {6}, {7}, {2}, {3}, {1}},
};
static const struct mtk_iommu_plat_data mt8186_data_mm = {
.m4u_plat = M4U_MT8186,
.flags = HAS_BCLK | HAS_SUB_COMM_2BITS | OUT_ORDER_WR_EN |
WR_THROT_EN | IOVA_34_EN | MTK_IOMMU_TYPE_MM,
.larbid_remap = {{0}, {1, MTK_INVALID_LARBID, 8}, {4}, {7}, {2}, {9, 11, 19, 20},
{MTK_INVALID_LARBID, 14, 16},
{MTK_INVALID_LARBID, 13, MTK_INVALID_LARBID, 17}},
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
.banks_num = 1,
.banks_enable = {true},
.iova_region = mt8192_multi_dom,
.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
};
static const struct mtk_iommu_plat_data mt8192_data = {
.m4u_plat = M4U_MT8192,
.flags = HAS_BCLK | HAS_SUB_COMM_2BITS | OUT_ORDER_WR_EN |
WR_THROT_EN | IOVA_34_EN | MTK_IOMMU_TYPE_MM,
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
.banks_num = 1,
.banks_enable = {true},
.iova_region = mt8192_multi_dom,
.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
.larbid_remap = {{0}, {1}, {4, 5}, {7}, {2}, {9, 11, 19, 20},
{0, 14, 16}, {0, 13, 18, 17}},
};
static const struct mtk_iommu_plat_data mt8195_data_infra = {
.m4u_plat = M4U_MT8195,
.flags = WR_THROT_EN | DCM_DISABLE | STD_AXI_MODE | PM_CLK_AO |
MTK_IOMMU_TYPE_INFRA | IFA_IOMMU_PCIE_SUPPORT,
.pericfg_comp_str = "mediatek,mt8195-pericfg_ao",
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
.banks_num = 5,
.banks_enable = {true, false, false, false, true},
.banks_portmsk = {[0] = GENMASK(19, 16), /* PCIe */
[4] = GENMASK(31, 20), /* USB */
},
.iova_region = single_domain,
.iova_region_nr = ARRAY_SIZE(single_domain),
};
static const struct mtk_iommu_plat_data mt8195_data_vdo = {
.m4u_plat = M4U_MT8195,
.flags = HAS_BCLK | HAS_SUB_COMM_2BITS | OUT_ORDER_WR_EN |
WR_THROT_EN | IOVA_34_EN | SHARE_PGTABLE | MTK_IOMMU_TYPE_MM,
.hw_list = &m4ulist,
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
.banks_num = 1,
.banks_enable = {true},
.iova_region = mt8192_multi_dom,
.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
.larbid_remap = {{2, 0}, {21}, {24}, {7}, {19}, {9, 10, 11},
{13, 17, 15/* 17b */, 25}, {5}},
};
static const struct mtk_iommu_plat_data mt8195_data_vpp = {
.m4u_plat = M4U_MT8195,
.flags = HAS_BCLK | HAS_SUB_COMM_3BITS | OUT_ORDER_WR_EN |
WR_THROT_EN | IOVA_34_EN | SHARE_PGTABLE | MTK_IOMMU_TYPE_MM,
.hw_list = &m4ulist,
.inv_sel_reg = REG_MMU_INV_SEL_GEN2,
.banks_num = 1,
.banks_enable = {true},
.iova_region = mt8192_multi_dom,
.iova_region_nr = ARRAY_SIZE(mt8192_multi_dom),
.larbid_remap = {{1}, {3},
{22, MTK_INVALID_LARBID, MTK_INVALID_LARBID, MTK_INVALID_LARBID, 23},
{8}, {20}, {12},
/* 16: 16a; 29: 16b; 30: CCUtop0; 31: CCUtop1 */
{14, 16, 29, 26, 30, 31, 18},
{4, MTK_INVALID_LARBID, MTK_INVALID_LARBID, MTK_INVALID_LARBID, 6}},
};
static const struct of_device_id mtk_iommu_of_ids[] = {
{ .compatible = "mediatek,mt2712-m4u", .data = &mt2712_data},
{ .compatible = "mediatek,mt6779-m4u", .data = &mt6779_data},
{ .compatible = "mediatek,mt8167-m4u", .data = &mt8167_data},
{ .compatible = "mediatek,mt8173-m4u", .data = &mt8173_data},
{ .compatible = "mediatek,mt8183-m4u", .data = &mt8183_data},
{ .compatible = "mediatek,mt8186-iommu-mm", .data = &mt8186_data_mm}, /* mm: m4u */
{ .compatible = "mediatek,mt8192-m4u", .data = &mt8192_data},
{ .compatible = "mediatek,mt8195-iommu-infra", .data = &mt8195_data_infra},
{ .compatible = "mediatek,mt8195-iommu-vdo", .data = &mt8195_data_vdo},
{ .compatible = "mediatek,mt8195-iommu-vpp", .data = &mt8195_data_vpp},
{}
};
static struct platform_driver mtk_iommu_driver = {
.probe = mtk_iommu_probe,
.remove = mtk_iommu_remove,
.driver = {
.name = "mtk-iommu",
.of_match_table = mtk_iommu_of_ids,
.pm = &mtk_iommu_pm_ops,
}
};
module_platform_driver(mtk_iommu_driver);
MODULE_DESCRIPTION("IOMMU API for MediaTek M4U implementations");
MODULE_LICENSE("GPL v2");