linux/fs/xfs/libxfs/xfs_attr_leaf.c

2950 lines
83 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2000-2005 Silicon Graphics, Inc.
* Copyright (c) 2013 Red Hat, Inc.
* All Rights Reserved.
*/
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_shared.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_sb.h"
#include "xfs_mount.h"
#include "xfs_da_format.h"
#include "xfs_da_btree.h"
#include "xfs_inode.h"
#include "xfs_trans.h"
#include "xfs_bmap_btree.h"
#include "xfs_bmap.h"
#include "xfs_attr_sf.h"
#include "xfs_attr_remote.h"
#include "xfs_attr.h"
#include "xfs_attr_leaf.h"
#include "xfs_error.h"
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-14 23:14:59 +00:00
#include "xfs_trace.h"
#include "xfs_buf_item.h"
#include "xfs_dir2.h"
xfs: validate metadata LSNs against log on v5 superblocks Since the onset of v5 superblocks, the LSN of the last modification has been included in a variety of on-disk data structures. This LSN is used to provide log recovery ordering guarantees (e.g., to ensure an older log recovery item is not replayed over a newer target data structure). While this works correctly from the point a filesystem is formatted and mounted, userspace tools have some problematic behaviors that defeat this mechanism. For example, xfs_repair historically zeroes out the log unconditionally (regardless of whether corruption is detected). If this occurs, the LSN of the filesystem is reset and the log is now in a problematic state with respect to on-disk metadata structures that might have a larger LSN. Until either the log catches up to the highest previously used metadata LSN or each affected data structure is modified and written out without incident (which resets the metadata LSN), log recovery is susceptible to filesystem corruption. This problem is ultimately addressed and repaired in the associated userspace tools. The kernel is still responsible to detect the problem and notify the user that something is wrong. Check the superblock LSN at mount time and fail the mount if it is invalid. From that point on, trigger verifier failure on any metadata I/O where an invalid LSN is detected. This results in a filesystem shutdown and guarantees that we do not log metadata changes with invalid LSNs on disk. Since this is a known issue with a known recovery path, present a warning to instruct the user how to recover. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-10-12 04:59:25 +00:00
#include "xfs_log.h"
/*
* xfs_attr_leaf.c
*
* Routines to implement leaf blocks of attributes as Btrees of hashed names.
*/
/*========================================================================
* Function prototypes for the kernel.
*========================================================================*/
/*
* Routines used for growing the Btree.
*/
STATIC int xfs_attr3_leaf_create(struct xfs_da_args *args,
xfs_dablk_t which_block, struct xfs_buf **bpp);
STATIC int xfs_attr3_leaf_add_work(struct xfs_buf *leaf_buffer,
struct xfs_attr3_icleaf_hdr *ichdr,
struct xfs_da_args *args, int freemap_index);
STATIC void xfs_attr3_leaf_compact(struct xfs_da_args *args,
struct xfs_attr3_icleaf_hdr *ichdr,
struct xfs_buf *leaf_buffer);
STATIC void xfs_attr3_leaf_rebalance(xfs_da_state_t *state,
xfs_da_state_blk_t *blk1,
xfs_da_state_blk_t *blk2);
STATIC int xfs_attr3_leaf_figure_balance(xfs_da_state_t *state,
xfs_da_state_blk_t *leaf_blk_1,
struct xfs_attr3_icleaf_hdr *ichdr1,
xfs_da_state_blk_t *leaf_blk_2,
struct xfs_attr3_icleaf_hdr *ichdr2,
int *number_entries_in_blk1,
int *number_usedbytes_in_blk1);
/*
* Utility routines.
*/
STATIC void xfs_attr3_leaf_moveents(struct xfs_da_args *args,
struct xfs_attr_leafblock *src_leaf,
struct xfs_attr3_icleaf_hdr *src_ichdr, int src_start,
struct xfs_attr_leafblock *dst_leaf,
struct xfs_attr3_icleaf_hdr *dst_ichdr, int dst_start,
int move_count);
STATIC int xfs_attr_leaf_entsize(xfs_attr_leafblock_t *leaf, int index);
/*
* attr3 block 'firstused' conversion helpers.
*
* firstused refers to the offset of the first used byte of the nameval region
* of an attr leaf block. The region starts at the tail of the block and expands
* backwards towards the middle. As such, firstused is initialized to the block
* size for an empty leaf block and is reduced from there.
*
* The attr3 block size is pegged to the fsb size and the maximum fsb is 64k.
* The in-core firstused field is 32-bit and thus supports the maximum fsb size.
* The on-disk field is only 16-bit, however, and overflows at 64k. Since this
* only occurs at exactly 64k, we use zero as a magic on-disk value to represent
* the attr block size. The following helpers manage the conversion between the
* in-core and on-disk formats.
*/
static void
xfs_attr3_leaf_firstused_from_disk(
struct xfs_da_geometry *geo,
struct xfs_attr3_icleaf_hdr *to,
struct xfs_attr_leafblock *from)
{
struct xfs_attr3_leaf_hdr *hdr3;
if (from->hdr.info.magic == cpu_to_be16(XFS_ATTR3_LEAF_MAGIC)) {
hdr3 = (struct xfs_attr3_leaf_hdr *) from;
to->firstused = be16_to_cpu(hdr3->firstused);
} else {
to->firstused = be16_to_cpu(from->hdr.firstused);
}
/*
* Convert from the magic fsb size value to actual blocksize. This
* should only occur for empty blocks when the block size overflows
* 16-bits.
*/
if (to->firstused == XFS_ATTR3_LEAF_NULLOFF) {
ASSERT(!to->count && !to->usedbytes);
ASSERT(geo->blksize > USHRT_MAX);
to->firstused = geo->blksize;
}
}
static void
xfs_attr3_leaf_firstused_to_disk(
struct xfs_da_geometry *geo,
struct xfs_attr_leafblock *to,
struct xfs_attr3_icleaf_hdr *from)
{
struct xfs_attr3_leaf_hdr *hdr3;
uint32_t firstused;
/* magic value should only be seen on disk */
ASSERT(from->firstused != XFS_ATTR3_LEAF_NULLOFF);
/*
* Scale down the 32-bit in-core firstused value to the 16-bit on-disk
* value. This only overflows at the max supported value of 64k. Use the
* magic on-disk value to represent block size in this case.
*/
firstused = from->firstused;
if (firstused > USHRT_MAX) {
ASSERT(from->firstused == geo->blksize);
firstused = XFS_ATTR3_LEAF_NULLOFF;
}
if (from->magic == XFS_ATTR3_LEAF_MAGIC) {
hdr3 = (struct xfs_attr3_leaf_hdr *) to;
hdr3->firstused = cpu_to_be16(firstused);
} else {
to->hdr.firstused = cpu_to_be16(firstused);
}
}
void
xfs_attr3_leaf_hdr_from_disk(
struct xfs_da_geometry *geo,
struct xfs_attr3_icleaf_hdr *to,
struct xfs_attr_leafblock *from)
{
int i;
ASSERT(from->hdr.info.magic == cpu_to_be16(XFS_ATTR_LEAF_MAGIC) ||
from->hdr.info.magic == cpu_to_be16(XFS_ATTR3_LEAF_MAGIC));
if (from->hdr.info.magic == cpu_to_be16(XFS_ATTR3_LEAF_MAGIC)) {
struct xfs_attr3_leaf_hdr *hdr3 = (struct xfs_attr3_leaf_hdr *)from;
to->forw = be32_to_cpu(hdr3->info.hdr.forw);
to->back = be32_to_cpu(hdr3->info.hdr.back);
to->magic = be16_to_cpu(hdr3->info.hdr.magic);
to->count = be16_to_cpu(hdr3->count);
to->usedbytes = be16_to_cpu(hdr3->usedbytes);
xfs_attr3_leaf_firstused_from_disk(geo, to, from);
to->holes = hdr3->holes;
for (i = 0; i < XFS_ATTR_LEAF_MAPSIZE; i++) {
to->freemap[i].base = be16_to_cpu(hdr3->freemap[i].base);
to->freemap[i].size = be16_to_cpu(hdr3->freemap[i].size);
}
return;
}
to->forw = be32_to_cpu(from->hdr.info.forw);
to->back = be32_to_cpu(from->hdr.info.back);
to->magic = be16_to_cpu(from->hdr.info.magic);
to->count = be16_to_cpu(from->hdr.count);
to->usedbytes = be16_to_cpu(from->hdr.usedbytes);
xfs_attr3_leaf_firstused_from_disk(geo, to, from);
to->holes = from->hdr.holes;
for (i = 0; i < XFS_ATTR_LEAF_MAPSIZE; i++) {
to->freemap[i].base = be16_to_cpu(from->hdr.freemap[i].base);
to->freemap[i].size = be16_to_cpu(from->hdr.freemap[i].size);
}
}
void
xfs_attr3_leaf_hdr_to_disk(
struct xfs_da_geometry *geo,
struct xfs_attr_leafblock *to,
struct xfs_attr3_icleaf_hdr *from)
{
int i;
ASSERT(from->magic == XFS_ATTR_LEAF_MAGIC ||
from->magic == XFS_ATTR3_LEAF_MAGIC);
if (from->magic == XFS_ATTR3_LEAF_MAGIC) {
struct xfs_attr3_leaf_hdr *hdr3 = (struct xfs_attr3_leaf_hdr *)to;
hdr3->info.hdr.forw = cpu_to_be32(from->forw);
hdr3->info.hdr.back = cpu_to_be32(from->back);
hdr3->info.hdr.magic = cpu_to_be16(from->magic);
hdr3->count = cpu_to_be16(from->count);
hdr3->usedbytes = cpu_to_be16(from->usedbytes);
xfs_attr3_leaf_firstused_to_disk(geo, to, from);
hdr3->holes = from->holes;
hdr3->pad1 = 0;
for (i = 0; i < XFS_ATTR_LEAF_MAPSIZE; i++) {
hdr3->freemap[i].base = cpu_to_be16(from->freemap[i].base);
hdr3->freemap[i].size = cpu_to_be16(from->freemap[i].size);
}
return;
}
to->hdr.info.forw = cpu_to_be32(from->forw);
to->hdr.info.back = cpu_to_be32(from->back);
to->hdr.info.magic = cpu_to_be16(from->magic);
to->hdr.count = cpu_to_be16(from->count);
to->hdr.usedbytes = cpu_to_be16(from->usedbytes);
xfs_attr3_leaf_firstused_to_disk(geo, to, from);
to->hdr.holes = from->holes;
to->hdr.pad1 = 0;
for (i = 0; i < XFS_ATTR_LEAF_MAPSIZE; i++) {
to->hdr.freemap[i].base = cpu_to_be16(from->freemap[i].base);
to->hdr.freemap[i].size = cpu_to_be16(from->freemap[i].size);
}
}
static xfs_failaddr_t
xfs_attr3_leaf_verify_entry(
struct xfs_mount *mp,
char *buf_end,
struct xfs_attr_leafblock *leaf,
struct xfs_attr3_icleaf_hdr *leafhdr,
struct xfs_attr_leaf_entry *ent,
int idx,
__u32 *last_hashval)
{
struct xfs_attr_leaf_name_local *lentry;
struct xfs_attr_leaf_name_remote *rentry;
char *name_end;
unsigned int nameidx;
unsigned int namesize;
__u32 hashval;
/* hash order check */
hashval = be32_to_cpu(ent->hashval);
if (hashval < *last_hashval)
return __this_address;
*last_hashval = hashval;
nameidx = be16_to_cpu(ent->nameidx);
if (nameidx < leafhdr->firstused || nameidx >= mp->m_attr_geo->blksize)
return __this_address;
/*
* Check the name information. The namelen fields are u8 so we can't
* possibly exceed the maximum name length of 255 bytes.
*/
if (ent->flags & XFS_ATTR_LOCAL) {
lentry = xfs_attr3_leaf_name_local(leaf, idx);
namesize = xfs_attr_leaf_entsize_local(lentry->namelen,
be16_to_cpu(lentry->valuelen));
name_end = (char *)lentry + namesize;
if (lentry->namelen == 0)
return __this_address;
} else {
rentry = xfs_attr3_leaf_name_remote(leaf, idx);
namesize = xfs_attr_leaf_entsize_remote(rentry->namelen);
name_end = (char *)rentry + namesize;
if (rentry->namelen == 0)
return __this_address;
if (!(ent->flags & XFS_ATTR_INCOMPLETE) &&
rentry->valueblk == 0)
return __this_address;
}
if (name_end > buf_end)
return __this_address;
return NULL;
}
static xfs_failaddr_t
xfs_attr3_leaf_verify(
struct xfs_buf *bp)
{
struct xfs_attr3_icleaf_hdr ichdr;
struct xfs_mount *mp = bp->b_mount;
struct xfs_attr_leafblock *leaf = bp->b_addr;
struct xfs_attr_leaf_entry *entries;
struct xfs_attr_leaf_entry *ent;
char *buf_end;
xfs: fix overflow in xfs_attr3_leaf_verify generic/070 on 64k block size filesystems is failing with a verifier corruption on writeback or an attribute leaf block: [ 94.973083] XFS (pmem0): Metadata corruption detected at xfs_attr3_leaf_verify+0x246/0x260, xfs_attr3_leaf block 0x811480 [ 94.975623] XFS (pmem0): Unmount and run xfs_repair [ 94.976720] XFS (pmem0): First 128 bytes of corrupted metadata buffer: [ 94.978270] 000000004b2e7b45: 00 00 00 00 00 00 00 00 3b ee 00 00 00 00 00 00 ........;....... [ 94.980268] 000000006b1db90b: 00 00 00 00 00 81 14 80 00 00 00 00 00 00 00 00 ................ [ 94.982251] 00000000433f2407: 22 7b 5c 82 2d 5c 47 4c bb 31 1c 37 fa a9 ce d6 "{\.-\GL.1.7.... [ 94.984157] 0000000010dc7dfb: 00 00 00 00 00 81 04 8a 00 0a 18 e8 dd 94 01 00 ................ [ 94.986215] 00000000d5a19229: 00 a0 dc f4 fe 98 01 68 f0 d8 07 e0 00 00 00 00 .......h........ [ 94.988171] 00000000521df36c: 0c 2d 32 e2 fe 20 01 00 0c 2d 58 65 fe 0c 01 00 .-2.. ...-Xe.... [ 94.990162] 000000008477ae06: 0c 2d 5b 66 fe 8c 01 00 0c 2d 71 35 fe 7c 01 00 .-[f.....-q5.|.. [ 94.992139] 00000000a4a6bca6: 0c 2d 72 37 fc d4 01 00 0c 2d d8 b8 f0 90 01 00 .-r7.....-...... [ 94.994789] XFS (pmem0): xfs_do_force_shutdown(0x8) called from line 1453 of file fs/xfs/xfs_buf.c. Return address = ffffffff815365f3 This is failing this check: end = ichdr.freemap[i].base + ichdr.freemap[i].size; if (end < ichdr.freemap[i].base) >>>>> return __this_address; if (end > mp->m_attr_geo->blksize) return __this_address; And from the buffer output above, the freemap array is: freemap[0].base = 0x00a0 freemap[0].size = 0xdcf4 end = 0xdd94 freemap[1].base = 0xfe98 freemap[1].size = 0x0168 end = 0x10000 freemap[2].base = 0xf0d8 freemap[2].size = 0x07e0 end = 0xf8b8 These all look valid - the block size is 0x10000 and so from the last check in the above verifier fragment we know that the end of freemap[1] is valid. The problem is that end is declared as: uint16_t end; And (uint16_t)0x10000 = 0. So we have a verifier bug here, not a corruption. Fix the verifier to use uint32_t types for the check and hence avoid the overflow. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=201577 Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-11-06 15:50:50 +00:00
uint32_t end; /* must be 32bit - see below */
__u32 last_hashval = 0;
int i;
xfs_failaddr_t fa;
xfs_attr3_leaf_hdr_from_disk(mp->m_attr_geo, &ichdr, leaf);
fa = xfs_da3_blkinfo_verify(bp, bp->b_addr);
if (fa)
return fa;
/*
* In recovery there is a transient state where count == 0 is valid
* because we may have transitioned an empty shortform attr to a leaf
* if the attr didn't fit in shortform.
*/
if (!xfs_log_in_recovery(mp) && ichdr.count == 0)
return __this_address;
/*
* firstused is the block offset of the first name info structure.
* Make sure it doesn't go off the block or crash into the header.
*/
if (ichdr.firstused > mp->m_attr_geo->blksize)
return __this_address;
if (ichdr.firstused < xfs_attr3_leaf_hdr_size(leaf))
return __this_address;
/* Make sure the entries array doesn't crash into the name info. */
entries = xfs_attr3_leaf_entryp(bp->b_addr);
if ((char *)&entries[ichdr.count] >
(char *)bp->b_addr + ichdr.firstused)
return __this_address;
buf_end = (char *)bp->b_addr + mp->m_attr_geo->blksize;
for (i = 0, ent = entries; i < ichdr.count; ent++, i++) {
fa = xfs_attr3_leaf_verify_entry(mp, buf_end, leaf, &ichdr,
ent, i, &last_hashval);
if (fa)
return fa;
}
/*
* Quickly check the freemap information. Attribute data has to be
* aligned to 4-byte boundaries, and likewise for the free space.
xfs: fix overflow in xfs_attr3_leaf_verify generic/070 on 64k block size filesystems is failing with a verifier corruption on writeback or an attribute leaf block: [ 94.973083] XFS (pmem0): Metadata corruption detected at xfs_attr3_leaf_verify+0x246/0x260, xfs_attr3_leaf block 0x811480 [ 94.975623] XFS (pmem0): Unmount and run xfs_repair [ 94.976720] XFS (pmem0): First 128 bytes of corrupted metadata buffer: [ 94.978270] 000000004b2e7b45: 00 00 00 00 00 00 00 00 3b ee 00 00 00 00 00 00 ........;....... [ 94.980268] 000000006b1db90b: 00 00 00 00 00 81 14 80 00 00 00 00 00 00 00 00 ................ [ 94.982251] 00000000433f2407: 22 7b 5c 82 2d 5c 47 4c bb 31 1c 37 fa a9 ce d6 "{\.-\GL.1.7.... [ 94.984157] 0000000010dc7dfb: 00 00 00 00 00 81 04 8a 00 0a 18 e8 dd 94 01 00 ................ [ 94.986215] 00000000d5a19229: 00 a0 dc f4 fe 98 01 68 f0 d8 07 e0 00 00 00 00 .......h........ [ 94.988171] 00000000521df36c: 0c 2d 32 e2 fe 20 01 00 0c 2d 58 65 fe 0c 01 00 .-2.. ...-Xe.... [ 94.990162] 000000008477ae06: 0c 2d 5b 66 fe 8c 01 00 0c 2d 71 35 fe 7c 01 00 .-[f.....-q5.|.. [ 94.992139] 00000000a4a6bca6: 0c 2d 72 37 fc d4 01 00 0c 2d d8 b8 f0 90 01 00 .-r7.....-...... [ 94.994789] XFS (pmem0): xfs_do_force_shutdown(0x8) called from line 1453 of file fs/xfs/xfs_buf.c. Return address = ffffffff815365f3 This is failing this check: end = ichdr.freemap[i].base + ichdr.freemap[i].size; if (end < ichdr.freemap[i].base) >>>>> return __this_address; if (end > mp->m_attr_geo->blksize) return __this_address; And from the buffer output above, the freemap array is: freemap[0].base = 0x00a0 freemap[0].size = 0xdcf4 end = 0xdd94 freemap[1].base = 0xfe98 freemap[1].size = 0x0168 end = 0x10000 freemap[2].base = 0xf0d8 freemap[2].size = 0x07e0 end = 0xf8b8 These all look valid - the block size is 0x10000 and so from the last check in the above verifier fragment we know that the end of freemap[1] is valid. The problem is that end is declared as: uint16_t end; And (uint16_t)0x10000 = 0. So we have a verifier bug here, not a corruption. Fix the verifier to use uint32_t types for the check and hence avoid the overflow. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=201577 Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-11-06 15:50:50 +00:00
*
* Note that for 64k block size filesystems, the freemap entries cannot
* overflow as they are only be16 fields. However, when checking end
* pointer of the freemap, we have to be careful to detect overflows and
* so use uint32_t for those checks.
*/
for (i = 0; i < XFS_ATTR_LEAF_MAPSIZE; i++) {
if (ichdr.freemap[i].base > mp->m_attr_geo->blksize)
return __this_address;
if (ichdr.freemap[i].base & 0x3)
return __this_address;
if (ichdr.freemap[i].size > mp->m_attr_geo->blksize)
return __this_address;
if (ichdr.freemap[i].size & 0x3)
return __this_address;
xfs: fix overflow in xfs_attr3_leaf_verify generic/070 on 64k block size filesystems is failing with a verifier corruption on writeback or an attribute leaf block: [ 94.973083] XFS (pmem0): Metadata corruption detected at xfs_attr3_leaf_verify+0x246/0x260, xfs_attr3_leaf block 0x811480 [ 94.975623] XFS (pmem0): Unmount and run xfs_repair [ 94.976720] XFS (pmem0): First 128 bytes of corrupted metadata buffer: [ 94.978270] 000000004b2e7b45: 00 00 00 00 00 00 00 00 3b ee 00 00 00 00 00 00 ........;....... [ 94.980268] 000000006b1db90b: 00 00 00 00 00 81 14 80 00 00 00 00 00 00 00 00 ................ [ 94.982251] 00000000433f2407: 22 7b 5c 82 2d 5c 47 4c bb 31 1c 37 fa a9 ce d6 "{\.-\GL.1.7.... [ 94.984157] 0000000010dc7dfb: 00 00 00 00 00 81 04 8a 00 0a 18 e8 dd 94 01 00 ................ [ 94.986215] 00000000d5a19229: 00 a0 dc f4 fe 98 01 68 f0 d8 07 e0 00 00 00 00 .......h........ [ 94.988171] 00000000521df36c: 0c 2d 32 e2 fe 20 01 00 0c 2d 58 65 fe 0c 01 00 .-2.. ...-Xe.... [ 94.990162] 000000008477ae06: 0c 2d 5b 66 fe 8c 01 00 0c 2d 71 35 fe 7c 01 00 .-[f.....-q5.|.. [ 94.992139] 00000000a4a6bca6: 0c 2d 72 37 fc d4 01 00 0c 2d d8 b8 f0 90 01 00 .-r7.....-...... [ 94.994789] XFS (pmem0): xfs_do_force_shutdown(0x8) called from line 1453 of file fs/xfs/xfs_buf.c. Return address = ffffffff815365f3 This is failing this check: end = ichdr.freemap[i].base + ichdr.freemap[i].size; if (end < ichdr.freemap[i].base) >>>>> return __this_address; if (end > mp->m_attr_geo->blksize) return __this_address; And from the buffer output above, the freemap array is: freemap[0].base = 0x00a0 freemap[0].size = 0xdcf4 end = 0xdd94 freemap[1].base = 0xfe98 freemap[1].size = 0x0168 end = 0x10000 freemap[2].base = 0xf0d8 freemap[2].size = 0x07e0 end = 0xf8b8 These all look valid - the block size is 0x10000 and so from the last check in the above verifier fragment we know that the end of freemap[1] is valid. The problem is that end is declared as: uint16_t end; And (uint16_t)0x10000 = 0. So we have a verifier bug here, not a corruption. Fix the verifier to use uint32_t types for the check and hence avoid the overflow. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=201577 Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-11-06 15:50:50 +00:00
/* be care of 16 bit overflows here */
end = (uint32_t)ichdr.freemap[i].base + ichdr.freemap[i].size;
if (end < ichdr.freemap[i].base)
return __this_address;
if (end > mp->m_attr_geo->blksize)
return __this_address;
}
return NULL;
}
static void
xfs_attr3_leaf_write_verify(
struct xfs_buf *bp)
{
struct xfs_mount *mp = bp->b_mount;
struct xfs_buf_log_item *bip = bp->b_log_item;
struct xfs_attr3_leaf_hdr *hdr3 = bp->b_addr;
xfs_failaddr_t fa;
fa = xfs_attr3_leaf_verify(bp);
if (fa) {
xfs_verifier_error(bp, -EFSCORRUPTED, fa);
return;
}
if (!xfs_sb_version_hascrc(&mp->m_sb))
return;
if (bip)
hdr3->info.lsn = cpu_to_be64(bip->bli_item.li_lsn);
xfs_buf_update_cksum(bp, XFS_ATTR3_LEAF_CRC_OFF);
}
/*
* leaf/node format detection on trees is sketchy, so a node read can be done on
* leaf level blocks when detection identifies the tree as a node format tree
* incorrectly. In this case, we need to swap the verifier to match the correct
* format of the block being read.
*/
static void
xfs_attr3_leaf_read_verify(
struct xfs_buf *bp)
{
struct xfs_mount *mp = bp->b_mount;
xfs_failaddr_t fa;
if (xfs_sb_version_hascrc(&mp->m_sb) &&
!xfs_buf_verify_cksum(bp, XFS_ATTR3_LEAF_CRC_OFF))
xfs_verifier_error(bp, -EFSBADCRC, __this_address);
else {
fa = xfs_attr3_leaf_verify(bp);
if (fa)
xfs_verifier_error(bp, -EFSCORRUPTED, fa);
}
}
const struct xfs_buf_ops xfs_attr3_leaf_buf_ops = {
.name = "xfs_attr3_leaf",
.magic16 = { cpu_to_be16(XFS_ATTR_LEAF_MAGIC),
cpu_to_be16(XFS_ATTR3_LEAF_MAGIC) },
.verify_read = xfs_attr3_leaf_read_verify,
.verify_write = xfs_attr3_leaf_write_verify,
.verify_struct = xfs_attr3_leaf_verify,
};
int
xfs_attr3_leaf_read(
struct xfs_trans *tp,
struct xfs_inode *dp,
xfs_dablk_t bno,
struct xfs_buf **bpp)
{
int err;
err = xfs_da_read_buf(tp, dp, bno, 0, bpp, XFS_ATTR_FORK,
&xfs_attr3_leaf_buf_ops);
if (!err && tp && *bpp)
xfs_trans_buf_set_type(tp, *bpp, XFS_BLFT_ATTR_LEAF_BUF);
return err;
}
/*========================================================================
* Namespace helper routines
*========================================================================*/
/*
* If namespace bits don't match return 0.
* If all match then return 1.
*/
STATIC int
xfs_attr_namesp_match(int arg_flags, int ondisk_flags)
{
return XFS_ATTR_NSP_ONDISK(ondisk_flags) == XFS_ATTR_NSP_ARGS_TO_ONDISK(arg_flags);
}
static int
xfs_attr_copy_value(
struct xfs_da_args *args,
unsigned char *value,
int valuelen)
{
/*
* No copy if all we have to do is get the length
*/
if (!args->valuelen) {
args->valuelen = valuelen;
return 0;
}
/*
* No copy if the length of the existing buffer is too small
*/
if (args->valuelen < valuelen) {
args->valuelen = valuelen;
return -ERANGE;
}
xfs: allocate xattr buffer on demand When doing file lookups and checking for permissions, we end up in xfs_get_acl() to see if there are any ACLs on the inode. This requires and xattr lookup, and to do that we have to supply a buffer large enough to hold an maximum sized xattr. On workloads were we are accessing a wide range of cache cold files under memory pressure (e.g. NFS fileservers) we end up spending a lot of time allocating the buffer. The buffer is 64k in length, so is a contiguous multi-page allocation, and if that then fails we fall back to vmalloc(). Hence the allocation here is /expensive/ when we are looking up hundreds of thousands of files a second. Initial numbers from a bpf trace show average time in xfs_get_acl() is ~32us, with ~19us of that in the memory allocation. Note these are average times, so there are going to be affected by the worst case allocations more than the common fast case... To avoid this, we could just do a "null" lookup to see if the ACL xattr exists and then only do the allocation if it exists. This, however, optimises the path for the "no ACL present" case at the expense of the "acl present" case. i.e. we can halve the time in xfs_get_acl() for the no acl case (i.e down to ~10-15us), but that then increases the ACL case by 30% (i.e. up to 40-45us). To solve this and speed up both cases, drive the xattr buffer allocation into the attribute code once we know what the actual xattr length is. For the no-xattr case, we avoid the allocation completely, speeding up that case. For the common ACL case, we'll end up with a fast heap allocation (because it'll be smaller than a page), and only for the rarer "we have a remote xattr" will we have a multi-page allocation occur. Hence the common ACL case will be much faster, too. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-08-29 16:04:10 +00:00
if (args->op_flags & XFS_DA_OP_ALLOCVAL) {
args->value = kmem_alloc_large(valuelen, 0);
if (!args->value)
return -ENOMEM;
}
args->valuelen = valuelen;
/* remote block xattr requires IO for copy-in */
if (args->rmtblkno)
return xfs_attr_rmtval_get(args);
/*
* This is to prevent a GCC warning because the remote xattr case
* doesn't have a value to pass in. In that case, we never reach here,
* but GCC can't work that out and so throws a "passing NULL to
* memcpy" warning.
*/
if (!value)
return -EINVAL;
memcpy(args->value, value, valuelen);
return 0;
}
/*========================================================================
* External routines when attribute fork size < XFS_LITINO(mp).
*========================================================================*/
/*
* Query whether the requested number of additional bytes of extended
* attribute space will be able to fit inline.
*
* Returns zero if not, else the di_forkoff fork offset to be used in the
* literal area for attribute data once the new bytes have been added.
*
* di_forkoff must be 8 byte aligned, hence is stored as a >>3 value;
* special case for dev/uuid inodes, they have fixed size data forks.
*/
int
xfs: fix inode fork extent count overflow [commit message is verbose for discussion purposes - will trim it down later. Some questions about implementation details at the end.] Zorro Lang recently ran a new test to stress single inode extent counts now that they are no longer limited by memory allocation. The test was simply: # xfs_io -f -c "falloc 0 40t" /mnt/scratch/big-file # ~/src/xfstests-dev/punch-alternating /mnt/scratch/big-file This test uncovered a problem where the hole punching operation appeared to finish with no error, but apparently only created 268M extents instead of the 10 billion it was supposed to. Further, trying to punch out extents that should have been present resulted in success, but no change in the extent count. It looked like a silent failure. While running the test and observing the behaviour in real time, I observed the extent coutn growing at ~2M extents/minute, and saw this after about an hour: # xfs_io -f -c "stat" /mnt/scratch/big-file |grep next ; \ > sleep 60 ; \ > xfs_io -f -c "stat" /mnt/scratch/big-file |grep next fsxattr.nextents = 127657993 fsxattr.nextents = 129683339 # And a few minutes later this: # xfs_io -f -c "stat" /mnt/scratch/big-file |grep next fsxattr.nextents = 4177861124 # Ah, what? Where did that 4 billion extra extents suddenly come from? Stop the workload, unmount, mount: # xfs_io -f -c "stat" /mnt/scratch/big-file |grep next fsxattr.nextents = 166044375 # And it's back at the expected number. i.e. the extent count is correct on disk, but it's screwed up in memory. I loaded up the extent list, and immediately: # xfs_io -f -c "stat" /mnt/scratch/big-file |grep next fsxattr.nextents = 4192576215 # It's bad again. So, where does that number come from? xfs_fill_fsxattr(): if (ip->i_df.if_flags & XFS_IFEXTENTS) fa->fsx_nextents = xfs_iext_count(&ip->i_df); else fa->fsx_nextents = ip->i_d.di_nextents; And that's the behaviour I just saw in a nutshell. The on disk count is correct, but once the tree is loaded into memory, it goes whacky. Clearly there's something wrong with xfs_iext_count(): inline xfs_extnum_t xfs_iext_count(struct xfs_ifork *ifp) { return ifp->if_bytes / sizeof(struct xfs_iext_rec); } Simple enough, but 134M extents is 2**27, and that's right about where things went wrong. A struct xfs_iext_rec is 16 bytes in size, which means 2**27 * 2**4 = 2**31 and we're right on target for an integer overflow. And, sure enough: struct xfs_ifork { int if_bytes; /* bytes in if_u1 */ .... Once we get 2**27 extents in a file, we overflow if_bytes and the in-core extent count goes wrong. And when we reach 2**28 extents, if_bytes wraps back to zero and things really start to go wrong there. This is where the silent failure comes from - only the first 2**28 extents can be looked up directly due to the overflow, all the extents above this index wrap back to somewhere in the first 2**28 extents. Hence with a regular pattern, trying to punch a hole in the range that didn't have holes mapped to a hole in the first 2**28 extents and so "succeeded" without changing anything. Hence "silent failure"... Fix this by converting if_bytes to a int64_t and converting all the index variables and size calculations to use int64_t types to avoid overflows in future. Signed integers are still used to enable easy detection of extent count underflows. This enables scalability of extent counts to the limits of the on-disk format - MAXEXTNUM (2**31) extents. Current testing is at over 500M extents and still going: fsxattr.nextents = 517310478 Reported-by: Zorro Lang <zlang@redhat.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-17 20:40:33 +00:00
xfs_attr_shortform_bytesfit(
struct xfs_inode *dp,
int bytes)
{
xfs: fix inode fork extent count overflow [commit message is verbose for discussion purposes - will trim it down later. Some questions about implementation details at the end.] Zorro Lang recently ran a new test to stress single inode extent counts now that they are no longer limited by memory allocation. The test was simply: # xfs_io -f -c "falloc 0 40t" /mnt/scratch/big-file # ~/src/xfstests-dev/punch-alternating /mnt/scratch/big-file This test uncovered a problem where the hole punching operation appeared to finish with no error, but apparently only created 268M extents instead of the 10 billion it was supposed to. Further, trying to punch out extents that should have been present resulted in success, but no change in the extent count. It looked like a silent failure. While running the test and observing the behaviour in real time, I observed the extent coutn growing at ~2M extents/minute, and saw this after about an hour: # xfs_io -f -c "stat" /mnt/scratch/big-file |grep next ; \ > sleep 60 ; \ > xfs_io -f -c "stat" /mnt/scratch/big-file |grep next fsxattr.nextents = 127657993 fsxattr.nextents = 129683339 # And a few minutes later this: # xfs_io -f -c "stat" /mnt/scratch/big-file |grep next fsxattr.nextents = 4177861124 # Ah, what? Where did that 4 billion extra extents suddenly come from? Stop the workload, unmount, mount: # xfs_io -f -c "stat" /mnt/scratch/big-file |grep next fsxattr.nextents = 166044375 # And it's back at the expected number. i.e. the extent count is correct on disk, but it's screwed up in memory. I loaded up the extent list, and immediately: # xfs_io -f -c "stat" /mnt/scratch/big-file |grep next fsxattr.nextents = 4192576215 # It's bad again. So, where does that number come from? xfs_fill_fsxattr(): if (ip->i_df.if_flags & XFS_IFEXTENTS) fa->fsx_nextents = xfs_iext_count(&ip->i_df); else fa->fsx_nextents = ip->i_d.di_nextents; And that's the behaviour I just saw in a nutshell. The on disk count is correct, but once the tree is loaded into memory, it goes whacky. Clearly there's something wrong with xfs_iext_count(): inline xfs_extnum_t xfs_iext_count(struct xfs_ifork *ifp) { return ifp->if_bytes / sizeof(struct xfs_iext_rec); } Simple enough, but 134M extents is 2**27, and that's right about where things went wrong. A struct xfs_iext_rec is 16 bytes in size, which means 2**27 * 2**4 = 2**31 and we're right on target for an integer overflow. And, sure enough: struct xfs_ifork { int if_bytes; /* bytes in if_u1 */ .... Once we get 2**27 extents in a file, we overflow if_bytes and the in-core extent count goes wrong. And when we reach 2**28 extents, if_bytes wraps back to zero and things really start to go wrong there. This is where the silent failure comes from - only the first 2**28 extents can be looked up directly due to the overflow, all the extents above this index wrap back to somewhere in the first 2**28 extents. Hence with a regular pattern, trying to punch a hole in the range that didn't have holes mapped to a hole in the first 2**28 extents and so "succeeded" without changing anything. Hence "silent failure"... Fix this by converting if_bytes to a int64_t and converting all the index variables and size calculations to use int64_t types to avoid overflows in future. Signed integers are still used to enable easy detection of extent count underflows. This enables scalability of extent counts to the limits of the on-disk format - MAXEXTNUM (2**31) extents. Current testing is at over 500M extents and still going: fsxattr.nextents = 517310478 Reported-by: Zorro Lang <zlang@redhat.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-17 20:40:33 +00:00
struct xfs_mount *mp = dp->i_mount;
int64_t dsize;
int minforkoff;
int maxforkoff;
int offset;
/* rounded down */
offset = (XFS_LITINO(mp, dp->i_d.di_version) - bytes) >> 3;
if (dp->i_d.di_format == XFS_DINODE_FMT_DEV) {
minforkoff = roundup(sizeof(xfs_dev_t), 8) >> 3;
return (offset >= minforkoff) ? minforkoff : 0;
}
/*
* If the requested numbers of bytes is smaller or equal to the
* current attribute fork size we can always proceed.
*
* Note that if_bytes in the data fork might actually be larger than
* the current data fork size is due to delalloc extents. In that
* case either the extent count will go down when they are converted
* to real extents, or the delalloc conversion will take care of the
* literal area rebalancing.
*/
if (bytes <= XFS_IFORK_ASIZE(dp))
return dp->i_d.di_forkoff;
/*
* For attr2 we can try to move the forkoff if there is space in the
* literal area, but for the old format we are done if there is no
* space in the fixed attribute fork.
*/
if (!(mp->m_flags & XFS_MOUNT_ATTR2))
return 0;
dsize = dp->i_df.if_bytes;
switch (dp->i_d.di_format) {
case XFS_DINODE_FMT_EXTENTS:
/*
* If there is no attr fork and the data fork is extents,
* determine if creating the default attr fork will result
* in the extents form migrating to btree. If so, the
* minimum offset only needs to be the space required for
* the btree root.
*/
if (!dp->i_d.di_forkoff && dp->i_df.if_bytes >
xfs_default_attroffset(dp))
dsize = XFS_BMDR_SPACE_CALC(MINDBTPTRS);
break;
case XFS_DINODE_FMT_BTREE:
/*
* If we have a data btree then keep forkoff if we have one,
* otherwise we are adding a new attr, so then we set
* minforkoff to where the btree root can finish so we have
* plenty of room for attrs
*/
if (dp->i_d.di_forkoff) {
if (offset < dp->i_d.di_forkoff)
return 0;
return dp->i_d.di_forkoff;
}
dsize = XFS_BMAP_BROOT_SPACE(mp, dp->i_df.if_broot);
break;
}
/*
* A data fork btree root must have space for at least
* MINDBTPTRS key/ptr pairs if the data fork is small or empty.
*/
xfs: fix inode fork extent count overflow [commit message is verbose for discussion purposes - will trim it down later. Some questions about implementation details at the end.] Zorro Lang recently ran a new test to stress single inode extent counts now that they are no longer limited by memory allocation. The test was simply: # xfs_io -f -c "falloc 0 40t" /mnt/scratch/big-file # ~/src/xfstests-dev/punch-alternating /mnt/scratch/big-file This test uncovered a problem where the hole punching operation appeared to finish with no error, but apparently only created 268M extents instead of the 10 billion it was supposed to. Further, trying to punch out extents that should have been present resulted in success, but no change in the extent count. It looked like a silent failure. While running the test and observing the behaviour in real time, I observed the extent coutn growing at ~2M extents/minute, and saw this after about an hour: # xfs_io -f -c "stat" /mnt/scratch/big-file |grep next ; \ > sleep 60 ; \ > xfs_io -f -c "stat" /mnt/scratch/big-file |grep next fsxattr.nextents = 127657993 fsxattr.nextents = 129683339 # And a few minutes later this: # xfs_io -f -c "stat" /mnt/scratch/big-file |grep next fsxattr.nextents = 4177861124 # Ah, what? Where did that 4 billion extra extents suddenly come from? Stop the workload, unmount, mount: # xfs_io -f -c "stat" /mnt/scratch/big-file |grep next fsxattr.nextents = 166044375 # And it's back at the expected number. i.e. the extent count is correct on disk, but it's screwed up in memory. I loaded up the extent list, and immediately: # xfs_io -f -c "stat" /mnt/scratch/big-file |grep next fsxattr.nextents = 4192576215 # It's bad again. So, where does that number come from? xfs_fill_fsxattr(): if (ip->i_df.if_flags & XFS_IFEXTENTS) fa->fsx_nextents = xfs_iext_count(&ip->i_df); else fa->fsx_nextents = ip->i_d.di_nextents; And that's the behaviour I just saw in a nutshell. The on disk count is correct, but once the tree is loaded into memory, it goes whacky. Clearly there's something wrong with xfs_iext_count(): inline xfs_extnum_t xfs_iext_count(struct xfs_ifork *ifp) { return ifp->if_bytes / sizeof(struct xfs_iext_rec); } Simple enough, but 134M extents is 2**27, and that's right about where things went wrong. A struct xfs_iext_rec is 16 bytes in size, which means 2**27 * 2**4 = 2**31 and we're right on target for an integer overflow. And, sure enough: struct xfs_ifork { int if_bytes; /* bytes in if_u1 */ .... Once we get 2**27 extents in a file, we overflow if_bytes and the in-core extent count goes wrong. And when we reach 2**28 extents, if_bytes wraps back to zero and things really start to go wrong there. This is where the silent failure comes from - only the first 2**28 extents can be looked up directly due to the overflow, all the extents above this index wrap back to somewhere in the first 2**28 extents. Hence with a regular pattern, trying to punch a hole in the range that didn't have holes mapped to a hole in the first 2**28 extents and so "succeeded" without changing anything. Hence "silent failure"... Fix this by converting if_bytes to a int64_t and converting all the index variables and size calculations to use int64_t types to avoid overflows in future. Signed integers are still used to enable easy detection of extent count underflows. This enables scalability of extent counts to the limits of the on-disk format - MAXEXTNUM (2**31) extents. Current testing is at over 500M extents and still going: fsxattr.nextents = 517310478 Reported-by: Zorro Lang <zlang@redhat.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-17 20:40:33 +00:00
minforkoff = max_t(int64_t, dsize, XFS_BMDR_SPACE_CALC(MINDBTPTRS));
minforkoff = roundup(minforkoff, 8) >> 3;
/* attr fork btree root can have at least this many key/ptr pairs */
maxforkoff = XFS_LITINO(mp, dp->i_d.di_version) -
XFS_BMDR_SPACE_CALC(MINABTPTRS);
maxforkoff = maxforkoff >> 3; /* rounded down */
if (offset >= maxforkoff)
return maxforkoff;
if (offset >= minforkoff)
return offset;
return 0;
}
/*
* Switch on the ATTR2 superblock bit (implies also FEATURES2)
*/
STATIC void
xfs_sbversion_add_attr2(xfs_mount_t *mp, xfs_trans_t *tp)
{
if ((mp->m_flags & XFS_MOUNT_ATTR2) &&
!(xfs_sb_version_hasattr2(&mp->m_sb))) {
spin_lock(&mp->m_sb_lock);
if (!xfs_sb_version_hasattr2(&mp->m_sb)) {
xfs_sb_version_addattr2(&mp->m_sb);
spin_unlock(&mp->m_sb_lock);
xfs_log_sb(tp);
} else
spin_unlock(&mp->m_sb_lock);
}
}
/*
* Create the initial contents of a shortform attribute list.
*/
void
xfs_attr_shortform_create(xfs_da_args_t *args)
{
xfs_attr_sf_hdr_t *hdr;
xfs_inode_t *dp;
struct xfs_ifork *ifp;
trace_xfs_attr_sf_create(args);
dp = args->dp;
ASSERT(dp != NULL);
ifp = dp->i_afp;
ASSERT(ifp != NULL);
ASSERT(ifp->if_bytes == 0);
if (dp->i_d.di_aformat == XFS_DINODE_FMT_EXTENTS) {
ifp->if_flags &= ~XFS_IFEXTENTS; /* just in case */
dp->i_d.di_aformat = XFS_DINODE_FMT_LOCAL;
ifp->if_flags |= XFS_IFINLINE;
} else {
ASSERT(ifp->if_flags & XFS_IFINLINE);
}
xfs_idata_realloc(dp, sizeof(*hdr), XFS_ATTR_FORK);
hdr = (xfs_attr_sf_hdr_t *)ifp->if_u1.if_data;
hdr->count = 0;
hdr->totsize = cpu_to_be16(sizeof(*hdr));
xfs_trans_log_inode(args->trans, dp, XFS_ILOG_CORE | XFS_ILOG_ADATA);
}
/*
* Add a name/value pair to the shortform attribute list.
* Overflow from the inode has already been checked for.
*/
void
xfs_attr_shortform_add(xfs_da_args_t *args, int forkoff)
{
xfs_attr_shortform_t *sf;
xfs_attr_sf_entry_t *sfe;
int i, offset, size;
xfs_mount_t *mp;
xfs_inode_t *dp;
struct xfs_ifork *ifp;
trace_xfs_attr_sf_add(args);
dp = args->dp;
mp = dp->i_mount;
dp->i_d.di_forkoff = forkoff;
ifp = dp->i_afp;
ASSERT(ifp->if_flags & XFS_IFINLINE);
sf = (xfs_attr_shortform_t *)ifp->if_u1.if_data;
sfe = &sf->list[0];
for (i = 0; i < sf->hdr.count; sfe = XFS_ATTR_SF_NEXTENTRY(sfe), i++) {
#ifdef DEBUG
if (sfe->namelen != args->namelen)
continue;
if (memcmp(args->name, sfe->nameval, args->namelen) != 0)
continue;
if (!xfs_attr_namesp_match(args->flags, sfe->flags))
continue;
ASSERT(0);
#endif
}
offset = (char *)sfe - (char *)sf;
size = XFS_ATTR_SF_ENTSIZE_BYNAME(args->namelen, args->valuelen);
xfs_idata_realloc(dp, size, XFS_ATTR_FORK);
sf = (xfs_attr_shortform_t *)ifp->if_u1.if_data;
sfe = (xfs_attr_sf_entry_t *)((char *)sf + offset);
sfe->namelen = args->namelen;
sfe->valuelen = args->valuelen;
sfe->flags = XFS_ATTR_NSP_ARGS_TO_ONDISK(args->flags);
memcpy(sfe->nameval, args->name, args->namelen);
memcpy(&sfe->nameval[args->namelen], args->value, args->valuelen);
sf->hdr.count++;
be16_add_cpu(&sf->hdr.totsize, size);
xfs_trans_log_inode(args->trans, dp, XFS_ILOG_CORE | XFS_ILOG_ADATA);
xfs_sbversion_add_attr2(mp, args->trans);
}
/*
* After the last attribute is removed revert to original inode format,
* making all literal area available to the data fork once more.
*/
void
xfs_attr_fork_remove(
struct xfs_inode *ip,
struct xfs_trans *tp)
{
xfs_idestroy_fork(ip, XFS_ATTR_FORK);
ip->i_d.di_forkoff = 0;
ip->i_d.di_aformat = XFS_DINODE_FMT_EXTENTS;
ASSERT(ip->i_d.di_anextents == 0);
ASSERT(ip->i_afp == NULL);
xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
}
/*
* Remove an attribute from the shortform attribute list structure.
*/
int
xfs_attr_shortform_remove(xfs_da_args_t *args)
{
xfs_attr_shortform_t *sf;
xfs_attr_sf_entry_t *sfe;
int base, size=0, end, totsize, i;
xfs_mount_t *mp;
xfs_inode_t *dp;
trace_xfs_attr_sf_remove(args);
dp = args->dp;
mp = dp->i_mount;
base = sizeof(xfs_attr_sf_hdr_t);
sf = (xfs_attr_shortform_t *)dp->i_afp->if_u1.if_data;
sfe = &sf->list[0];
end = sf->hdr.count;
for (i = 0; i < end; sfe = XFS_ATTR_SF_NEXTENTRY(sfe),
base += size, i++) {
size = XFS_ATTR_SF_ENTSIZE(sfe);
if (sfe->namelen != args->namelen)
continue;
if (memcmp(sfe->nameval, args->name, args->namelen) != 0)
continue;
if (!xfs_attr_namesp_match(args->flags, sfe->flags))
continue;
break;
}
if (i == end)
return -ENOATTR;
/*
* Fix up the attribute fork data, covering the hole
*/
end = base + size;
totsize = be16_to_cpu(sf->hdr.totsize);
if (end != totsize)
memmove(&((char *)sf)[base], &((char *)sf)[end], totsize - end);
sf->hdr.count--;
be16_add_cpu(&sf->hdr.totsize, -size);
/*
* Fix up the start offset of the attribute fork
*/
totsize -= size;
if (totsize == sizeof(xfs_attr_sf_hdr_t) &&
(mp->m_flags & XFS_MOUNT_ATTR2) &&
(dp->i_d.di_format != XFS_DINODE_FMT_BTREE) &&
!(args->op_flags & XFS_DA_OP_ADDNAME)) {
xfs_attr_fork_remove(dp, args->trans);
} else {
xfs_idata_realloc(dp, -size, XFS_ATTR_FORK);
dp->i_d.di_forkoff = xfs_attr_shortform_bytesfit(dp, totsize);
ASSERT(dp->i_d.di_forkoff);
ASSERT(totsize > sizeof(xfs_attr_sf_hdr_t) ||
(args->op_flags & XFS_DA_OP_ADDNAME) ||
!(mp->m_flags & XFS_MOUNT_ATTR2) ||
dp->i_d.di_format == XFS_DINODE_FMT_BTREE);
xfs_trans_log_inode(args->trans, dp,
XFS_ILOG_CORE | XFS_ILOG_ADATA);
}
xfs_sbversion_add_attr2(mp, args->trans);
return 0;
}
/*
* Look up a name in a shortform attribute list structure.
*/
/*ARGSUSED*/
int
xfs_attr_shortform_lookup(xfs_da_args_t *args)
{
xfs_attr_shortform_t *sf;
xfs_attr_sf_entry_t *sfe;
int i;
struct xfs_ifork *ifp;
trace_xfs_attr_sf_lookup(args);
ifp = args->dp->i_afp;
ASSERT(ifp->if_flags & XFS_IFINLINE);
sf = (xfs_attr_shortform_t *)ifp->if_u1.if_data;
sfe = &sf->list[0];
for (i = 0; i < sf->hdr.count;
sfe = XFS_ATTR_SF_NEXTENTRY(sfe), i++) {
if (sfe->namelen != args->namelen)
continue;
if (memcmp(args->name, sfe->nameval, args->namelen) != 0)
continue;
if (!xfs_attr_namesp_match(args->flags, sfe->flags))
continue;
return -EEXIST;
}
return -ENOATTR;
}
/*
* Retrieve the attribute value and length.
*
* If args->valuelen is zero, only the length needs to be returned. Unlike a
* lookup, we only return an error if the attribute does not exist or we can't
* retrieve the value.
*/
int
xfs_attr_shortform_getvalue(
struct xfs_da_args *args)
{
struct xfs_attr_shortform *sf;
struct xfs_attr_sf_entry *sfe;
int i;
ASSERT(args->dp->i_afp->if_flags == XFS_IFINLINE);
sf = (xfs_attr_shortform_t *)args->dp->i_afp->if_u1.if_data;
sfe = &sf->list[0];
for (i = 0; i < sf->hdr.count;
sfe = XFS_ATTR_SF_NEXTENTRY(sfe), i++) {
if (sfe->namelen != args->namelen)
continue;
if (memcmp(args->name, sfe->nameval, args->namelen) != 0)
continue;
if (!xfs_attr_namesp_match(args->flags, sfe->flags))
continue;
return xfs_attr_copy_value(args, &sfe->nameval[args->namelen],
sfe->valuelen);
}
return -ENOATTR;
}
/*
* Convert from using the shortform to the leaf. On success, return the
* buffer so that we can keep it locked until we're totally done with it.
*/
int
xfs_attr_shortform_to_leaf(
struct xfs_da_args *args,
struct xfs_buf **leaf_bp)
{
struct xfs_inode *dp;
struct xfs_attr_shortform *sf;
struct xfs_attr_sf_entry *sfe;
struct xfs_da_args nargs;
char *tmpbuffer;
int error, i, size;
xfs_dablk_t blkno;
struct xfs_buf *bp;
struct xfs_ifork *ifp;
trace_xfs_attr_sf_to_leaf(args);
dp = args->dp;
ifp = dp->i_afp;
sf = (xfs_attr_shortform_t *)ifp->if_u1.if_data;
size = be16_to_cpu(sf->hdr.totsize);
tmpbuffer = kmem_alloc(size, 0);
ASSERT(tmpbuffer != NULL);
memcpy(tmpbuffer, ifp->if_u1.if_data, size);
sf = (xfs_attr_shortform_t *)tmpbuffer;
xfs_idata_realloc(dp, -size, XFS_ATTR_FORK);
xfs_bmap_local_to_extents_empty(args->trans, dp, XFS_ATTR_FORK);
bp = NULL;
error = xfs_da_grow_inode(args, &blkno);
if (error)
goto out;
ASSERT(blkno == 0);
error = xfs_attr3_leaf_create(args, blkno, &bp);
if (error)
goto out;
memset((char *)&nargs, 0, sizeof(nargs));
nargs.dp = dp;
nargs.geo = args->geo;
nargs.total = args->total;
nargs.whichfork = XFS_ATTR_FORK;
nargs.trans = args->trans;
nargs.op_flags = XFS_DA_OP_OKNOENT;
sfe = &sf->list[0];
for (i = 0; i < sf->hdr.count; i++) {
nargs.name = sfe->nameval;
nargs.namelen = sfe->namelen;
nargs.value = &sfe->nameval[nargs.namelen];
nargs.valuelen = sfe->valuelen;
nargs.hashval = xfs_da_hashname(sfe->nameval,
sfe->namelen);
nargs.flags = XFS_ATTR_NSP_ONDISK_TO_ARGS(sfe->flags);
error = xfs_attr3_leaf_lookup_int(bp, &nargs); /* set a->index */
ASSERT(error == -ENOATTR);
error = xfs_attr3_leaf_add(bp, &nargs);
ASSERT(error != -ENOSPC);
if (error)
goto out;
sfe = XFS_ATTR_SF_NEXTENTRY(sfe);
}
error = 0;
*leaf_bp = bp;
out:
kmem_free(tmpbuffer);
return error;
}
/*
* Check a leaf attribute block to see if all the entries would fit into
* a shortform attribute list.
*/
int
xfs_attr_shortform_allfit(
struct xfs_buf *bp,
struct xfs_inode *dp)
{
struct xfs_attr_leafblock *leaf;
struct xfs_attr_leaf_entry *entry;
xfs_attr_leaf_name_local_t *name_loc;
struct xfs_attr3_icleaf_hdr leafhdr;
int bytes;
int i;
struct xfs_mount *mp = bp->b_mount;
leaf = bp->b_addr;
xfs_attr3_leaf_hdr_from_disk(mp->m_attr_geo, &leafhdr, leaf);
entry = xfs_attr3_leaf_entryp(leaf);
bytes = sizeof(struct xfs_attr_sf_hdr);
for (i = 0; i < leafhdr.count; entry++, i++) {
if (entry->flags & XFS_ATTR_INCOMPLETE)
continue; /* don't copy partial entries */
if (!(entry->flags & XFS_ATTR_LOCAL))
return 0;
name_loc = xfs_attr3_leaf_name_local(leaf, i);
if (name_loc->namelen >= XFS_ATTR_SF_ENTSIZE_MAX)
return 0;
if (be16_to_cpu(name_loc->valuelen) >= XFS_ATTR_SF_ENTSIZE_MAX)
return 0;
bytes += sizeof(struct xfs_attr_sf_entry) - 1
+ name_loc->namelen
+ be16_to_cpu(name_loc->valuelen);
}
if ((dp->i_mount->m_flags & XFS_MOUNT_ATTR2) &&
(dp->i_d.di_format != XFS_DINODE_FMT_BTREE) &&
(bytes == sizeof(struct xfs_attr_sf_hdr)))
return -1;
return xfs_attr_shortform_bytesfit(dp, bytes);
}
/* Verify the consistency of an inline attribute fork. */
xfs_failaddr_t
xfs_attr_shortform_verify(
struct xfs_inode *ip)
{
struct xfs_attr_shortform *sfp;
struct xfs_attr_sf_entry *sfep;
struct xfs_attr_sf_entry *next_sfep;
char *endp;
struct xfs_ifork *ifp;
int i;
xfs: fix inode fork extent count overflow [commit message is verbose for discussion purposes - will trim it down later. Some questions about implementation details at the end.] Zorro Lang recently ran a new test to stress single inode extent counts now that they are no longer limited by memory allocation. The test was simply: # xfs_io -f -c "falloc 0 40t" /mnt/scratch/big-file # ~/src/xfstests-dev/punch-alternating /mnt/scratch/big-file This test uncovered a problem where the hole punching operation appeared to finish with no error, but apparently only created 268M extents instead of the 10 billion it was supposed to. Further, trying to punch out extents that should have been present resulted in success, but no change in the extent count. It looked like a silent failure. While running the test and observing the behaviour in real time, I observed the extent coutn growing at ~2M extents/minute, and saw this after about an hour: # xfs_io -f -c "stat" /mnt/scratch/big-file |grep next ; \ > sleep 60 ; \ > xfs_io -f -c "stat" /mnt/scratch/big-file |grep next fsxattr.nextents = 127657993 fsxattr.nextents = 129683339 # And a few minutes later this: # xfs_io -f -c "stat" /mnt/scratch/big-file |grep next fsxattr.nextents = 4177861124 # Ah, what? Where did that 4 billion extra extents suddenly come from? Stop the workload, unmount, mount: # xfs_io -f -c "stat" /mnt/scratch/big-file |grep next fsxattr.nextents = 166044375 # And it's back at the expected number. i.e. the extent count is correct on disk, but it's screwed up in memory. I loaded up the extent list, and immediately: # xfs_io -f -c "stat" /mnt/scratch/big-file |grep next fsxattr.nextents = 4192576215 # It's bad again. So, where does that number come from? xfs_fill_fsxattr(): if (ip->i_df.if_flags & XFS_IFEXTENTS) fa->fsx_nextents = xfs_iext_count(&ip->i_df); else fa->fsx_nextents = ip->i_d.di_nextents; And that's the behaviour I just saw in a nutshell. The on disk count is correct, but once the tree is loaded into memory, it goes whacky. Clearly there's something wrong with xfs_iext_count(): inline xfs_extnum_t xfs_iext_count(struct xfs_ifork *ifp) { return ifp->if_bytes / sizeof(struct xfs_iext_rec); } Simple enough, but 134M extents is 2**27, and that's right about where things went wrong. A struct xfs_iext_rec is 16 bytes in size, which means 2**27 * 2**4 = 2**31 and we're right on target for an integer overflow. And, sure enough: struct xfs_ifork { int if_bytes; /* bytes in if_u1 */ .... Once we get 2**27 extents in a file, we overflow if_bytes and the in-core extent count goes wrong. And when we reach 2**28 extents, if_bytes wraps back to zero and things really start to go wrong there. This is where the silent failure comes from - only the first 2**28 extents can be looked up directly due to the overflow, all the extents above this index wrap back to somewhere in the first 2**28 extents. Hence with a regular pattern, trying to punch a hole in the range that didn't have holes mapped to a hole in the first 2**28 extents and so "succeeded" without changing anything. Hence "silent failure"... Fix this by converting if_bytes to a int64_t and converting all the index variables and size calculations to use int64_t types to avoid overflows in future. Signed integers are still used to enable easy detection of extent count underflows. This enables scalability of extent counts to the limits of the on-disk format - MAXEXTNUM (2**31) extents. Current testing is at over 500M extents and still going: fsxattr.nextents = 517310478 Reported-by: Zorro Lang <zlang@redhat.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-17 20:40:33 +00:00
int64_t size;
ASSERT(ip->i_d.di_aformat == XFS_DINODE_FMT_LOCAL);
ifp = XFS_IFORK_PTR(ip, XFS_ATTR_FORK);
sfp = (struct xfs_attr_shortform *)ifp->if_u1.if_data;
size = ifp->if_bytes;
/*
* Give up if the attribute is way too short.
*/
if (size < sizeof(struct xfs_attr_sf_hdr))
return __this_address;
endp = (char *)sfp + size;
/* Check all reported entries */
sfep = &sfp->list[0];
for (i = 0; i < sfp->hdr.count; i++) {
/*
* struct xfs_attr_sf_entry has a variable length.
* Check the fixed-offset parts of the structure are
* within the data buffer.
*/
if (((char *)sfep + sizeof(*sfep)) >= endp)
return __this_address;
/* Don't allow names with known bad length. */
if (sfep->namelen == 0)
return __this_address;
/*
* Check that the variable-length part of the structure is
* within the data buffer. The next entry starts after the
* name component, so nextentry is an acceptable test.
*/
next_sfep = XFS_ATTR_SF_NEXTENTRY(sfep);
if ((char *)next_sfep > endp)
return __this_address;
/*
* Check for unknown flags. Short form doesn't support
* the incomplete or local bits, so we can use the namespace
* mask here.
*/
if (sfep->flags & ~XFS_ATTR_NSP_ONDISK_MASK)
return __this_address;
/*
* Check for invalid namespace combinations. We only allow
* one namespace flag per xattr, so we can just count the
* bits (i.e. hweight) here.
*/
if (hweight8(sfep->flags & XFS_ATTR_NSP_ONDISK_MASK) > 1)
return __this_address;
sfep = next_sfep;
}
if ((void *)sfep != (void *)endp)
return __this_address;
return NULL;
}
/*
* Convert a leaf attribute list to shortform attribute list
*/
int
xfs_attr3_leaf_to_shortform(
struct xfs_buf *bp,
struct xfs_da_args *args,
int forkoff)
{
struct xfs_attr_leafblock *leaf;
struct xfs_attr3_icleaf_hdr ichdr;
struct xfs_attr_leaf_entry *entry;
struct xfs_attr_leaf_name_local *name_loc;
struct xfs_da_args nargs;
struct xfs_inode *dp = args->dp;
char *tmpbuffer;
int error;
int i;
trace_xfs_attr_leaf_to_sf(args);
tmpbuffer = kmem_alloc(args->geo->blksize, 0);
if (!tmpbuffer)
return -ENOMEM;
memcpy(tmpbuffer, bp->b_addr, args->geo->blksize);
leaf = (xfs_attr_leafblock_t *)tmpbuffer;
xfs_attr3_leaf_hdr_from_disk(args->geo, &ichdr, leaf);
entry = xfs_attr3_leaf_entryp(leaf);
/* XXX (dgc): buffer is about to be marked stale - why zero it? */
memset(bp->b_addr, 0, args->geo->blksize);
/*
* Clean out the prior contents of the attribute list.
*/
error = xfs_da_shrink_inode(args, 0, bp);
if (error)
goto out;
if (forkoff == -1) {
ASSERT(dp->i_mount->m_flags & XFS_MOUNT_ATTR2);
ASSERT(dp->i_d.di_format != XFS_DINODE_FMT_BTREE);
xfs_attr_fork_remove(dp, args->trans);
goto out;
}
xfs_attr_shortform_create(args);
/*
* Copy the attributes
*/
memset((char *)&nargs, 0, sizeof(nargs));
nargs.geo = args->geo;
nargs.dp = dp;
nargs.total = args->total;
nargs.whichfork = XFS_ATTR_FORK;
nargs.trans = args->trans;
nargs.op_flags = XFS_DA_OP_OKNOENT;
for (i = 0; i < ichdr.count; entry++, i++) {
if (entry->flags & XFS_ATTR_INCOMPLETE)
continue; /* don't copy partial entries */
if (!entry->nameidx)
continue;
ASSERT(entry->flags & XFS_ATTR_LOCAL);
name_loc = xfs_attr3_leaf_name_local(leaf, i);
nargs.name = name_loc->nameval;
nargs.namelen = name_loc->namelen;
nargs.value = &name_loc->nameval[nargs.namelen];
nargs.valuelen = be16_to_cpu(name_loc->valuelen);
nargs.hashval = be32_to_cpu(entry->hashval);
nargs.flags = XFS_ATTR_NSP_ONDISK_TO_ARGS(entry->flags);
xfs_attr_shortform_add(&nargs, forkoff);
}
error = 0;
out:
kmem_free(tmpbuffer);
return error;
}
/*
* Convert from using a single leaf to a root node and a leaf.
*/
int
xfs_attr3_leaf_to_node(
struct xfs_da_args *args)
{
struct xfs_attr_leafblock *leaf;
struct xfs_attr3_icleaf_hdr icleafhdr;
struct xfs_attr_leaf_entry *entries;
struct xfs_da3_icnode_hdr icnodehdr;
struct xfs_da_intnode *node;
struct xfs_inode *dp = args->dp;
struct xfs_mount *mp = dp->i_mount;
struct xfs_buf *bp1 = NULL;
struct xfs_buf *bp2 = NULL;
xfs_dablk_t blkno;
int error;
trace_xfs_attr_leaf_to_node(args);
error = xfs_da_grow_inode(args, &blkno);
if (error)
goto out;
error = xfs_attr3_leaf_read(args->trans, dp, 0, &bp1);
if (error)
goto out;
error = xfs_da_get_buf(args->trans, dp, blkno, &bp2, XFS_ATTR_FORK);
if (error)
goto out;
/* copy leaf to new buffer, update identifiers */
xfs_trans_buf_set_type(args->trans, bp2, XFS_BLFT_ATTR_LEAF_BUF);
bp2->b_ops = bp1->b_ops;
memcpy(bp2->b_addr, bp1->b_addr, args->geo->blksize);
if (xfs_sb_version_hascrc(&mp->m_sb)) {
struct xfs_da3_blkinfo *hdr3 = bp2->b_addr;
hdr3->blkno = cpu_to_be64(bp2->b_bn);
}
xfs_trans_log_buf(args->trans, bp2, 0, args->geo->blksize - 1);
/*
* Set up the new root node.
*/
error = xfs_da3_node_create(args, 0, 1, &bp1, XFS_ATTR_FORK);
if (error)
goto out;
node = bp1->b_addr;
xfs_da3_node_hdr_from_disk(mp, &icnodehdr, node);
leaf = bp2->b_addr;
xfs_attr3_leaf_hdr_from_disk(args->geo, &icleafhdr, leaf);
entries = xfs_attr3_leaf_entryp(leaf);
/* both on-disk, don't endian-flip twice */
icnodehdr.btree[0].hashval = entries[icleafhdr.count - 1].hashval;
icnodehdr.btree[0].before = cpu_to_be32(blkno);
icnodehdr.count = 1;
xfs_da3_node_hdr_to_disk(dp->i_mount, node, &icnodehdr);
xfs_trans_log_buf(args->trans, bp1, 0, args->geo->blksize - 1);
error = 0;
out:
return error;
}
/*========================================================================
* Routines used for growing the Btree.
*========================================================================*/
/*
* Create the initial contents of a leaf attribute list
* or a leaf in a node attribute list.
*/
STATIC int
xfs_attr3_leaf_create(
struct xfs_da_args *args,
xfs_dablk_t blkno,
struct xfs_buf **bpp)
{
struct xfs_attr_leafblock *leaf;
struct xfs_attr3_icleaf_hdr ichdr;
struct xfs_inode *dp = args->dp;
struct xfs_mount *mp = dp->i_mount;
struct xfs_buf *bp;
int error;
trace_xfs_attr_leaf_create(args);
error = xfs_da_get_buf(args->trans, args->dp, blkno, &bp,
XFS_ATTR_FORK);
if (error)
return error;
bp->b_ops = &xfs_attr3_leaf_buf_ops;
xfs_trans_buf_set_type(args->trans, bp, XFS_BLFT_ATTR_LEAF_BUF);
leaf = bp->b_addr;
memset(leaf, 0, args->geo->blksize);
memset(&ichdr, 0, sizeof(ichdr));
ichdr.firstused = args->geo->blksize;
if (xfs_sb_version_hascrc(&mp->m_sb)) {
struct xfs_da3_blkinfo *hdr3 = bp->b_addr;
ichdr.magic = XFS_ATTR3_LEAF_MAGIC;
hdr3->blkno = cpu_to_be64(bp->b_bn);
hdr3->owner = cpu_to_be64(dp->i_ino);
uuid_copy(&hdr3->uuid, &mp->m_sb.sb_meta_uuid);
ichdr.freemap[0].base = sizeof(struct xfs_attr3_leaf_hdr);
} else {
ichdr.magic = XFS_ATTR_LEAF_MAGIC;
ichdr.freemap[0].base = sizeof(struct xfs_attr_leaf_hdr);
}
ichdr.freemap[0].size = ichdr.firstused - ichdr.freemap[0].base;
xfs_attr3_leaf_hdr_to_disk(args->geo, leaf, &ichdr);
xfs_trans_log_buf(args->trans, bp, 0, args->geo->blksize - 1);
*bpp = bp;
return 0;
}
/*
* Split the leaf node, rebalance, then add the new entry.
*/
int
xfs_attr3_leaf_split(
struct xfs_da_state *state,
struct xfs_da_state_blk *oldblk,
struct xfs_da_state_blk *newblk)
{
xfs_dablk_t blkno;
int error;
trace_xfs_attr_leaf_split(state->args);
/*
* Allocate space for a new leaf node.
*/
ASSERT(oldblk->magic == XFS_ATTR_LEAF_MAGIC);
error = xfs_da_grow_inode(state->args, &blkno);
if (error)
return error;
error = xfs_attr3_leaf_create(state->args, blkno, &newblk->bp);
if (error)
return error;
newblk->blkno = blkno;
newblk->magic = XFS_ATTR_LEAF_MAGIC;
/*
* Rebalance the entries across the two leaves.
* NOTE: rebalance() currently depends on the 2nd block being empty.
*/
xfs_attr3_leaf_rebalance(state, oldblk, newblk);
error = xfs_da3_blk_link(state, oldblk, newblk);
if (error)
return error;
/*
* Save info on "old" attribute for "atomic rename" ops, leaf_add()
* modifies the index/blkno/rmtblk/rmtblkcnt fields to show the
* "new" attrs info. Will need the "old" info to remove it later.
*
* Insert the "new" entry in the correct block.
*/
if (state->inleaf) {
trace_xfs_attr_leaf_add_old(state->args);
error = xfs_attr3_leaf_add(oldblk->bp, state->args);
} else {
trace_xfs_attr_leaf_add_new(state->args);
error = xfs_attr3_leaf_add(newblk->bp, state->args);
}
/*
* Update last hashval in each block since we added the name.
*/
oldblk->hashval = xfs_attr_leaf_lasthash(oldblk->bp, NULL);
newblk->hashval = xfs_attr_leaf_lasthash(newblk->bp, NULL);
return error;
}
/*
* Add a name to the leaf attribute list structure.
*/
int
xfs_attr3_leaf_add(
struct xfs_buf *bp,
struct xfs_da_args *args)
{
struct xfs_attr_leafblock *leaf;
struct xfs_attr3_icleaf_hdr ichdr;
int tablesize;
int entsize;
int sum;
int tmp;
int i;
trace_xfs_attr_leaf_add(args);
leaf = bp->b_addr;
xfs_attr3_leaf_hdr_from_disk(args->geo, &ichdr, leaf);
ASSERT(args->index >= 0 && args->index <= ichdr.count);
entsize = xfs_attr_leaf_newentsize(args, NULL);
/*
* Search through freemap for first-fit on new name length.
* (may need to figure in size of entry struct too)
*/
tablesize = (ichdr.count + 1) * sizeof(xfs_attr_leaf_entry_t)
+ xfs_attr3_leaf_hdr_size(leaf);
for (sum = 0, i = XFS_ATTR_LEAF_MAPSIZE - 1; i >= 0; i--) {
if (tablesize > ichdr.firstused) {
sum += ichdr.freemap[i].size;
continue;
}
if (!ichdr.freemap[i].size)
continue; /* no space in this map */
tmp = entsize;
if (ichdr.freemap[i].base < ichdr.firstused)
tmp += sizeof(xfs_attr_leaf_entry_t);
if (ichdr.freemap[i].size >= tmp) {
tmp = xfs_attr3_leaf_add_work(bp, &ichdr, args, i);
goto out_log_hdr;
}
sum += ichdr.freemap[i].size;
}
/*
* If there are no holes in the address space of the block,
* and we don't have enough freespace, then compaction will do us
* no good and we should just give up.
*/
if (!ichdr.holes && sum < entsize)
return -ENOSPC;
/*
* Compact the entries to coalesce free space.
* This may change the hdr->count via dropping INCOMPLETE entries.
*/
xfs_attr3_leaf_compact(args, &ichdr, bp);
/*
* After compaction, the block is guaranteed to have only one
* free region, in freemap[0]. If it is not big enough, give up.
*/
if (ichdr.freemap[0].size < (entsize + sizeof(xfs_attr_leaf_entry_t))) {
tmp = -ENOSPC;
goto out_log_hdr;
}
tmp = xfs_attr3_leaf_add_work(bp, &ichdr, args, 0);
out_log_hdr:
xfs_attr3_leaf_hdr_to_disk(args->geo, leaf, &ichdr);
xfs_trans_log_buf(args->trans, bp,
XFS_DA_LOGRANGE(leaf, &leaf->hdr,
xfs_attr3_leaf_hdr_size(leaf)));
return tmp;
}
/*
* Add a name to a leaf attribute list structure.
*/
STATIC int
xfs_attr3_leaf_add_work(
struct xfs_buf *bp,
struct xfs_attr3_icleaf_hdr *ichdr,
struct xfs_da_args *args,
int mapindex)
{
struct xfs_attr_leafblock *leaf;
struct xfs_attr_leaf_entry *entry;
struct xfs_attr_leaf_name_local *name_loc;
struct xfs_attr_leaf_name_remote *name_rmt;
struct xfs_mount *mp;
int tmp;
int i;
trace_xfs_attr_leaf_add_work(args);
leaf = bp->b_addr;
ASSERT(mapindex >= 0 && mapindex < XFS_ATTR_LEAF_MAPSIZE);
ASSERT(args->index >= 0 && args->index <= ichdr->count);
/*
* Force open some space in the entry array and fill it in.
*/
entry = &xfs_attr3_leaf_entryp(leaf)[args->index];
if (args->index < ichdr->count) {
tmp = ichdr->count - args->index;
tmp *= sizeof(xfs_attr_leaf_entry_t);
memmove(entry + 1, entry, tmp);
xfs_trans_log_buf(args->trans, bp,
XFS_DA_LOGRANGE(leaf, entry, tmp + sizeof(*entry)));
}
ichdr->count++;
/*
* Allocate space for the new string (at the end of the run).
*/
mp = args->trans->t_mountp;
ASSERT(ichdr->freemap[mapindex].base < args->geo->blksize);
ASSERT((ichdr->freemap[mapindex].base & 0x3) == 0);
ASSERT(ichdr->freemap[mapindex].size >=
xfs_attr_leaf_newentsize(args, NULL));
ASSERT(ichdr->freemap[mapindex].size < args->geo->blksize);
ASSERT((ichdr->freemap[mapindex].size & 0x3) == 0);
ichdr->freemap[mapindex].size -= xfs_attr_leaf_newentsize(args, &tmp);
entry->nameidx = cpu_to_be16(ichdr->freemap[mapindex].base +
ichdr->freemap[mapindex].size);
entry->hashval = cpu_to_be32(args->hashval);
entry->flags = tmp ? XFS_ATTR_LOCAL : 0;
entry->flags |= XFS_ATTR_NSP_ARGS_TO_ONDISK(args->flags);
if (args->op_flags & XFS_DA_OP_RENAME) {
entry->flags |= XFS_ATTR_INCOMPLETE;
if ((args->blkno2 == args->blkno) &&
(args->index2 <= args->index)) {
args->index2++;
}
}
xfs_trans_log_buf(args->trans, bp,
XFS_DA_LOGRANGE(leaf, entry, sizeof(*entry)));
ASSERT((args->index == 0) ||
(be32_to_cpu(entry->hashval) >= be32_to_cpu((entry-1)->hashval)));
ASSERT((args->index == ichdr->count - 1) ||
(be32_to_cpu(entry->hashval) <= be32_to_cpu((entry+1)->hashval)));
/*
* For "remote" attribute values, simply note that we need to
* allocate space for the "remote" value. We can't actually
* allocate the extents in this transaction, and we can't decide
* which blocks they should be as we might allocate more blocks
* as part of this transaction (a split operation for example).
*/
if (entry->flags & XFS_ATTR_LOCAL) {
name_loc = xfs_attr3_leaf_name_local(leaf, args->index);
name_loc->namelen = args->namelen;
name_loc->valuelen = cpu_to_be16(args->valuelen);
memcpy((char *)name_loc->nameval, args->name, args->namelen);
memcpy((char *)&name_loc->nameval[args->namelen], args->value,
be16_to_cpu(name_loc->valuelen));
} else {
name_rmt = xfs_attr3_leaf_name_remote(leaf, args->index);
name_rmt->namelen = args->namelen;
memcpy((char *)name_rmt->name, args->name, args->namelen);
entry->flags |= XFS_ATTR_INCOMPLETE;
/* just in case */
name_rmt->valuelen = 0;
name_rmt->valueblk = 0;
args->rmtblkno = 1;
xfs: rework remote attr CRCs Note: this changes the on-disk remote attribute format. I assert that this is OK to do as CRCs are marked experimental and the first kernel it is included in has not yet reached release yet. Further, the userspace utilities are still evolving and so anyone using this stuff right now is a developer or tester using volatile filesystems for testing this feature. Hence changing the format right now to save longer term pain is the right thing to do. The fundamental change is to move from a header per extent in the attribute to a header per filesytem block in the attribute. This means there are more header blocks and the parsing of the attribute data is slightly more complex, but it has the advantage that we always know the size of the attribute on disk based on the length of the data it contains. This is where the header-per-extent method has problems. We don't know the size of the attribute on disk without first knowing how many extents are used to hold it. And we can't tell from a mapping lookup, either, because remote attributes can be allocated contiguously with other attribute blocks and so there is no obvious way of determining the actual size of the atribute on disk short of walking and mapping buffers. The problem with this approach is that if we map a buffer incorrectly (e.g. we make the last buffer for the attribute data too long), we then get buffer cache lookup failure when we map it correctly. i.e. we get a size mismatch on lookup. This is not necessarily fatal, but it's a cache coherency problem that can lead to returning the wrong data to userspace or writing the wrong data to disk. And debug kernels will assert fail if this occurs. I found lots of niggly little problems trying to fix this issue on a 4k block size filesystem, finally getting it to pass with lots of fixes. The thing is, 1024 byte filesystems still failed, and it was getting really complex handling all the corner cases that were showing up. And there were clearly more that I hadn't found yet. It is complex, fragile code, and if we don't fix it now, it will be complex, fragile code forever more. Hence the simple fix is to add a header to each filesystem block. This gives us the same relationship between the attribute data length and the number of blocks on disk as we have without CRCs - it's a linear mapping and doesn't require us to guess anything. It is simple to implement, too - the remote block count calculated at lookup time can be used by the remote attribute set/get/remove code without modification for both CRC and non-CRC filesystems. The world becomes sane again. Because the copy-in and copy-out now need to iterate over each filesystem block, I moved them into helper functions so we separate the block mapping and buffer manupulations from the attribute data and CRC header manipulations. The code becomes much clearer as a result, and it is a lot easier to understand and debug. It also appears to be much more robust - once it worked on 4k block size filesystems, it has worked without failure on 1k block size filesystems, too. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-05-21 08:02:08 +00:00
args->rmtblkcnt = xfs_attr3_rmt_blocks(mp, args->valuelen);
xfs: remote attribute overwrite causes transaction overrun Commit e461fcb ("xfs: remote attribute lookups require the value length") passes the remote attribute length in the xfs_da_args structure on lookup so that CRC calculations and validity checking can be performed correctly by related code. This, unfortunately has the side effect of changing the args->valuelen parameter in cases where it shouldn't. That is, when we replace a remote attribute, the incoming replacement stores the value and length in args->value and args->valuelen, but then the lookup which finds the existing remote attribute overwrites args->valuelen with the length of the remote attribute being replaced. Hence when we go to create the new attribute, we create it of the size of the existing remote attribute, not the size it is supposed to be. When the new attribute is much smaller than the old attribute, this results in a transaction overrun and an ASSERT() failure on a debug kernel: XFS: Assertion failed: tp->t_blk_res_used <= tp->t_blk_res, file: fs/xfs/xfs_trans.c, line: 331 Fix this by keeping the remote attribute value length separate to the attribute value length in the xfs_da_args structure. The enables us to pass the length of the remote attribute to be removed without overwriting the new attribute's length. Also, ensure that when we save remote block contexts for a later rename we zero the original state variables so that we don't confuse the state of the attribute to be removes with the state of the new attribute that we just added. [Spotted by Brain Foster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-05-05 21:37:31 +00:00
args->rmtvaluelen = args->valuelen;
}
xfs_trans_log_buf(args->trans, bp,
XFS_DA_LOGRANGE(leaf, xfs_attr3_leaf_name(leaf, args->index),
xfs_attr_leaf_entsize(leaf, args->index)));
/*
* Update the control info for this leaf node
*/
if (be16_to_cpu(entry->nameidx) < ichdr->firstused)
ichdr->firstused = be16_to_cpu(entry->nameidx);
ASSERT(ichdr->firstused >= ichdr->count * sizeof(xfs_attr_leaf_entry_t)
+ xfs_attr3_leaf_hdr_size(leaf));
tmp = (ichdr->count - 1) * sizeof(xfs_attr_leaf_entry_t)
+ xfs_attr3_leaf_hdr_size(leaf);
for (i = 0; i < XFS_ATTR_LEAF_MAPSIZE; i++) {
if (ichdr->freemap[i].base == tmp) {
ichdr->freemap[i].base += sizeof(xfs_attr_leaf_entry_t);
xfs: fix attr leaf header freemap.size underflow The leaf format xattr addition helper xfs_attr3_leaf_add_work() adjusts the block freemap in a couple places. The first update drops the size of the freemap that the caller had already selected to place the xattr name/value data. Before the function returns, it also checks whether the entries array has encroached on a freemap range by virtue of the new entry addition. This is necessary because the entries array grows from the start of the block (but end of the block header) towards the end of the block while the name/value data grows from the end of the block in the opposite direction. If the associated freemap is already empty, however, size is zero and the subtraction underflows the field and causes corruption. This is reproduced rarely by generic/070. The observed behavior is that a smaller sized freemap is aligned to the end of the entries list, several subsequent xattr additions land in larger freemaps and the entries list expands into the smaller freemap until it is fully consumed and then underflows. Note that it is not otherwise a corruption for the entries array to consume an empty freemap because the nameval list (i.e. the firstused pointer in the xattr header) starts beyond the end of the corrupted freemap. Update the freemap size modification to account for the fact that the freemap entry can be empty and thus stale. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-11-16 05:15:08 +00:00
ichdr->freemap[i].size -=
min_t(uint16_t, ichdr->freemap[i].size,
sizeof(xfs_attr_leaf_entry_t));
}
}
ichdr->usedbytes += xfs_attr_leaf_entsize(leaf, args->index);
return 0;
}
/*
* Garbage collect a leaf attribute list block by copying it to a new buffer.
*/
STATIC void
xfs_attr3_leaf_compact(
struct xfs_da_args *args,
struct xfs_attr3_icleaf_hdr *ichdr_dst,
struct xfs_buf *bp)
{
struct xfs_attr_leafblock *leaf_src;
struct xfs_attr_leafblock *leaf_dst;
struct xfs_attr3_icleaf_hdr ichdr_src;
struct xfs_trans *trans = args->trans;
char *tmpbuffer;
trace_xfs_attr_leaf_compact(args);
tmpbuffer = kmem_alloc(args->geo->blksize, 0);
memcpy(tmpbuffer, bp->b_addr, args->geo->blksize);
memset(bp->b_addr, 0, args->geo->blksize);
leaf_src = (xfs_attr_leafblock_t *)tmpbuffer;
leaf_dst = bp->b_addr;
/*
* Copy the on-disk header back into the destination buffer to ensure
* all the information in the header that is not part of the incore
* header structure is preserved.
*/
memcpy(bp->b_addr, tmpbuffer, xfs_attr3_leaf_hdr_size(leaf_src));
/* Initialise the incore headers */
ichdr_src = *ichdr_dst; /* struct copy */
ichdr_dst->firstused = args->geo->blksize;
ichdr_dst->usedbytes = 0;
ichdr_dst->count = 0;
ichdr_dst->holes = 0;
ichdr_dst->freemap[0].base = xfs_attr3_leaf_hdr_size(leaf_src);
ichdr_dst->freemap[0].size = ichdr_dst->firstused -
ichdr_dst->freemap[0].base;
/* write the header back to initialise the underlying buffer */
xfs_attr3_leaf_hdr_to_disk(args->geo, leaf_dst, ichdr_dst);
/*
* Copy all entry's in the same (sorted) order,
* but allocate name/value pairs packed and in sequence.
*/
xfs_attr3_leaf_moveents(args, leaf_src, &ichdr_src, 0,
leaf_dst, ichdr_dst, 0, ichdr_src.count);
/*
* this logs the entire buffer, but the caller must write the header
* back to the buffer when it is finished modifying it.
*/
xfs_trans_log_buf(trans, bp, 0, args->geo->blksize - 1);
kmem_free(tmpbuffer);
}
/*
* Compare two leaf blocks "order".
* Return 0 unless leaf2 should go before leaf1.
*/
static int
xfs_attr3_leaf_order(
struct xfs_buf *leaf1_bp,
struct xfs_attr3_icleaf_hdr *leaf1hdr,
struct xfs_buf *leaf2_bp,
struct xfs_attr3_icleaf_hdr *leaf2hdr)
{
struct xfs_attr_leaf_entry *entries1;
struct xfs_attr_leaf_entry *entries2;
entries1 = xfs_attr3_leaf_entryp(leaf1_bp->b_addr);
entries2 = xfs_attr3_leaf_entryp(leaf2_bp->b_addr);
if (leaf1hdr->count > 0 && leaf2hdr->count > 0 &&
((be32_to_cpu(entries2[0].hashval) <
be32_to_cpu(entries1[0].hashval)) ||
(be32_to_cpu(entries2[leaf2hdr->count - 1].hashval) <
be32_to_cpu(entries1[leaf1hdr->count - 1].hashval)))) {
return 1;
}
return 0;
}
int
xfs_attr_leaf_order(
struct xfs_buf *leaf1_bp,
struct xfs_buf *leaf2_bp)
{
struct xfs_attr3_icleaf_hdr ichdr1;
struct xfs_attr3_icleaf_hdr ichdr2;
struct xfs_mount *mp = leaf1_bp->b_mount;
xfs_attr3_leaf_hdr_from_disk(mp->m_attr_geo, &ichdr1, leaf1_bp->b_addr);
xfs_attr3_leaf_hdr_from_disk(mp->m_attr_geo, &ichdr2, leaf2_bp->b_addr);
return xfs_attr3_leaf_order(leaf1_bp, &ichdr1, leaf2_bp, &ichdr2);
}
/*
* Redistribute the attribute list entries between two leaf nodes,
* taking into account the size of the new entry.
*
* NOTE: if new block is empty, then it will get the upper half of the
* old block. At present, all (one) callers pass in an empty second block.
*
* This code adjusts the args->index/blkno and args->index2/blkno2 fields
* to match what it is doing in splitting the attribute leaf block. Those
* values are used in "atomic rename" operations on attributes. Note that
* the "new" and "old" values can end up in different blocks.
*/
STATIC void
xfs_attr3_leaf_rebalance(
struct xfs_da_state *state,
struct xfs_da_state_blk *blk1,
struct xfs_da_state_blk *blk2)
{
struct xfs_da_args *args;
struct xfs_attr_leafblock *leaf1;
struct xfs_attr_leafblock *leaf2;
struct xfs_attr3_icleaf_hdr ichdr1;
struct xfs_attr3_icleaf_hdr ichdr2;
struct xfs_attr_leaf_entry *entries1;
struct xfs_attr_leaf_entry *entries2;
int count;
int totallen;
int max;
int space;
int swap;
/*
* Set up environment.
*/
ASSERT(blk1->magic == XFS_ATTR_LEAF_MAGIC);
ASSERT(blk2->magic == XFS_ATTR_LEAF_MAGIC);
leaf1 = blk1->bp->b_addr;
leaf2 = blk2->bp->b_addr;
xfs_attr3_leaf_hdr_from_disk(state->args->geo, &ichdr1, leaf1);
xfs_attr3_leaf_hdr_from_disk(state->args->geo, &ichdr2, leaf2);
ASSERT(ichdr2.count == 0);
args = state->args;
trace_xfs_attr_leaf_rebalance(args);
/*
* Check ordering of blocks, reverse if it makes things simpler.
*
* NOTE: Given that all (current) callers pass in an empty
* second block, this code should never set "swap".
*/
swap = 0;
if (xfs_attr3_leaf_order(blk1->bp, &ichdr1, blk2->bp, &ichdr2)) {
swap(blk1, blk2);
/* swap structures rather than reconverting them */
swap(ichdr1, ichdr2);
leaf1 = blk1->bp->b_addr;
leaf2 = blk2->bp->b_addr;
swap = 1;
}
/*
* Examine entries until we reduce the absolute difference in
* byte usage between the two blocks to a minimum. Then get
* the direction to copy and the number of elements to move.
*
* "inleaf" is true if the new entry should be inserted into blk1.
* If "swap" is also true, then reverse the sense of "inleaf".
*/
state->inleaf = xfs_attr3_leaf_figure_balance(state, blk1, &ichdr1,
blk2, &ichdr2,
&count, &totallen);
if (swap)
state->inleaf = !state->inleaf;
/*
* Move any entries required from leaf to leaf:
*/
if (count < ichdr1.count) {
/*
* Figure the total bytes to be added to the destination leaf.
*/
/* number entries being moved */
count = ichdr1.count - count;
space = ichdr1.usedbytes - totallen;
space += count * sizeof(xfs_attr_leaf_entry_t);
/*
* leaf2 is the destination, compact it if it looks tight.
*/
max = ichdr2.firstused - xfs_attr3_leaf_hdr_size(leaf1);
max -= ichdr2.count * sizeof(xfs_attr_leaf_entry_t);
if (space > max)
xfs_attr3_leaf_compact(args, &ichdr2, blk2->bp);
/*
* Move high entries from leaf1 to low end of leaf2.
*/
xfs_attr3_leaf_moveents(args, leaf1, &ichdr1,
ichdr1.count - count, leaf2, &ichdr2, 0, count);
} else if (count > ichdr1.count) {
/*
* I assert that since all callers pass in an empty
* second buffer, this code should never execute.
*/
xfs: fix attr tree double split corruption In certain circumstances, a double split of an attribute tree is needed to insert or replace an attribute. In rare situations, this can go wrong, leaving the attribute tree corrupted. In this case, the attr being replaced is the last attr in a leaf node, and the replacement is larger so doesn't fit in the same leaf node. When we have the initial condition of a node format attribute btree with two leaves at index 1 and 2. Call them L1 and L2. The leaf L1 is completely full, there is not a single byte of free space in it. L2 is mostly empty. The attribute being replaced - call it X - is the last attribute in L1. The way an attribute replace is executed is that the replacement attribute - call it Y - is first inserted into the tree, but has an INCOMPLETE flag set on it so that list traversals ignore it. Once this transaction is committed, a second transaction it run to atomically mark Y as COMPLETE and X as INCOMPLETE, so that a traversal will now find Y and skip X. Once that transaction is committed, attribute X is then removed. So, the initial condition is: +--------+ +--------+ | L1 | | L2 | | fwd: 2 |---->| fwd: 0 | | bwd: 0 |<----| bwd: 1 | | fsp: 0 | | fsp: N | |--------| |--------| | attr A | | attr 1 | |--------| |--------| | attr B | | attr 2 | |--------| |--------| .......... .......... |--------| |--------| | attr X | | attr n | +--------+ +--------+ So now we go to replace X, and see that L1:fsp = 0 - it is full so we can't insert Y in the same leaf. So we record the the location of attribute X so we can track it for later use, then we split L1 into L1 and L3 and reblance across the two leafs. We end with: +--------+ +--------+ +--------+ | L1 | | L3 | | L2 | | fwd: 3 |---->| fwd: 2 |---->| fwd: 0 | | bwd: 0 |<----| bwd: 1 |<----| bwd: 3 | | fsp: M | | fsp: J | | fsp: N | |--------| |--------| |--------| | attr A | | attr X | | attr 1 | |--------| +--------+ |--------| | attr B | | attr 2 | |--------| |--------| .......... .......... |--------| |--------| | attr W | | attr n | +--------+ +--------+ And we track that the original attribute is now at L3:0. We then try to insert Y into L1 again, and find that there isn't enough room because the new attribute is larger than the old one. Hence we have to split again to make room for Y. We end up with this: +--------+ +--------+ +--------+ +--------+ | L1 | | L4 | | L3 | | L2 | | fwd: 4 |---->| fwd: 3 |---->| fwd: 2 |---->| fwd: 0 | | bwd: 0 |<----| bwd: 1 |<----| bwd: 4 |<----| bwd: 3 | | fsp: M | | fsp: J | | fsp: J | | fsp: N | |--------| |--------| |--------| |--------| | attr A | | attr Y | | attr X | | attr 1 | |--------| + INCOMP + +--------+ |--------| | attr B | +--------+ | attr 2 | |--------| |--------| .......... .......... |--------| |--------| | attr W | | attr n | +--------+ +--------+ And now we have the new (incomplete) attribute @ L4:0, and the original attribute at L3:0. At this point, the first transaction is committed, and we move to the flipping of the flags. This is where we are supposed to end up with this: +--------+ +--------+ +--------+ +--------+ | L1 | | L4 | | L3 | | L2 | | fwd: 4 |---->| fwd: 3 |---->| fwd: 2 |---->| fwd: 0 | | bwd: 0 |<----| bwd: 1 |<----| bwd: 4 |<----| bwd: 3 | | fsp: M | | fsp: J | | fsp: J | | fsp: N | |--------| |--------| |--------| |--------| | attr A | | attr Y | | attr X | | attr 1 | |--------| +--------+ + INCOMP + |--------| | attr B | +--------+ | attr 2 | |--------| |--------| .......... .......... |--------| |--------| | attr W | | attr n | +--------+ +--------+ But that doesn't happen properly - the attribute tracking indexes are not pointing to the right locations. What we end up with is both the old attribute to be removed pointing at L4:0 and the new attribute at L4:1. On a debug kernel, this assert fails like so: XFS: Assertion failed: args->index2 < be16_to_cpu(leaf2->hdr.count), file: fs/xfs/xfs_attr_leaf.c, line: 2725 because the new attribute location does not exist. On a production kernel, this goes unnoticed and the code proceeds ahead merrily and removes L4 because it thinks that is the block that is no longer needed. This leaves the hash index node pointing to entries L1, L4 and L2, but only blocks L1, L3 and L2 to exist. Further, the leaf level sibling list is L1 <-> L4 <-> L2, but L4 is now free space, and so everything is busted. This corruption is caused by the removal of the old attribute triggering a join - it joins everything correctly but then frees the wrong block. xfs_repair will report something like: bad sibling back pointer for block 4 in attribute fork for inode 131 problem with attribute contents in inode 131 would clear attr fork bad nblocks 8 for inode 131, would reset to 3 bad anextents 4 for inode 131, would reset to 0 The problem lies in the assignment of the old/new blocks for tracking purposes when the double leaf split occurs. The first split tries to place the new attribute inside the current leaf (i.e. "inleaf == true") and moves the old attribute (X) to the new block. This sets up the old block/index to L1:X, and newly allocated block to L3:0. It then moves attr X to the new block and tries to insert attr Y at the old index. That fails, so it splits again. With the second split, the rebalance ends up placing the new attr in the second new block - L4:0 - and this is where the code goes wrong. What is does is it sets both the new and old block index to the second new block. Hence it inserts attr Y at the right place (L4:0) but overwrites the current location of the attr to replace that is held in the new block index (currently L3:0). It over writes it with L4:1 - the index we later assert fail on. Hopefully this table will show this in a foramt that is a bit easier to understand: Split old attr index new attr index vanilla patched vanilla patched before 1st L1:26 L1:26 N/A N/A after 1st L3:0 L3:0 L1:26 L1:26 after 2nd L4:0 L3:0 L4:1 L4:0 ^^^^ ^^^^ wrong wrong The fix is surprisingly simple, for all this analysis - just stop the rebalance on the out-of leaf case from overwriting the new attr index - it's already correct for the double split case. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-12 11:09:44 +00:00
ASSERT(0);
/*
* Figure the total bytes to be added to the destination leaf.
*/
/* number entries being moved */
count -= ichdr1.count;
space = totallen - ichdr1.usedbytes;
space += count * sizeof(xfs_attr_leaf_entry_t);
/*
* leaf1 is the destination, compact it if it looks tight.
*/
max = ichdr1.firstused - xfs_attr3_leaf_hdr_size(leaf1);
max -= ichdr1.count * sizeof(xfs_attr_leaf_entry_t);
if (space > max)
xfs_attr3_leaf_compact(args, &ichdr1, blk1->bp);
/*
* Move low entries from leaf2 to high end of leaf1.
*/
xfs_attr3_leaf_moveents(args, leaf2, &ichdr2, 0, leaf1, &ichdr1,
ichdr1.count, count);
}
xfs_attr3_leaf_hdr_to_disk(state->args->geo, leaf1, &ichdr1);
xfs_attr3_leaf_hdr_to_disk(state->args->geo, leaf2, &ichdr2);
xfs_trans_log_buf(args->trans, blk1->bp, 0, args->geo->blksize - 1);
xfs_trans_log_buf(args->trans, blk2->bp, 0, args->geo->blksize - 1);
/*
* Copy out last hashval in each block for B-tree code.
*/
entries1 = xfs_attr3_leaf_entryp(leaf1);
entries2 = xfs_attr3_leaf_entryp(leaf2);
blk1->hashval = be32_to_cpu(entries1[ichdr1.count - 1].hashval);
blk2->hashval = be32_to_cpu(entries2[ichdr2.count - 1].hashval);
/*
* Adjust the expected index for insertion.
* NOTE: this code depends on the (current) situation that the
* second block was originally empty.
*
* If the insertion point moved to the 2nd block, we must adjust
* the index. We must also track the entry just following the
* new entry for use in an "atomic rename" operation, that entry
* is always the "old" entry and the "new" entry is what we are
* inserting. The index/blkno fields refer to the "old" entry,
* while the index2/blkno2 fields refer to the "new" entry.
*/
if (blk1->index > ichdr1.count) {
ASSERT(state->inleaf == 0);
blk2->index = blk1->index - ichdr1.count;
args->index = args->index2 = blk2->index;
args->blkno = args->blkno2 = blk2->blkno;
} else if (blk1->index == ichdr1.count) {
if (state->inleaf) {
args->index = blk1->index;
args->blkno = blk1->blkno;
args->index2 = 0;
args->blkno2 = blk2->blkno;
} else {
xfs: fix attr tree double split corruption In certain circumstances, a double split of an attribute tree is needed to insert or replace an attribute. In rare situations, this can go wrong, leaving the attribute tree corrupted. In this case, the attr being replaced is the last attr in a leaf node, and the replacement is larger so doesn't fit in the same leaf node. When we have the initial condition of a node format attribute btree with two leaves at index 1 and 2. Call them L1 and L2. The leaf L1 is completely full, there is not a single byte of free space in it. L2 is mostly empty. The attribute being replaced - call it X - is the last attribute in L1. The way an attribute replace is executed is that the replacement attribute - call it Y - is first inserted into the tree, but has an INCOMPLETE flag set on it so that list traversals ignore it. Once this transaction is committed, a second transaction it run to atomically mark Y as COMPLETE and X as INCOMPLETE, so that a traversal will now find Y and skip X. Once that transaction is committed, attribute X is then removed. So, the initial condition is: +--------+ +--------+ | L1 | | L2 | | fwd: 2 |---->| fwd: 0 | | bwd: 0 |<----| bwd: 1 | | fsp: 0 | | fsp: N | |--------| |--------| | attr A | | attr 1 | |--------| |--------| | attr B | | attr 2 | |--------| |--------| .......... .......... |--------| |--------| | attr X | | attr n | +--------+ +--------+ So now we go to replace X, and see that L1:fsp = 0 - it is full so we can't insert Y in the same leaf. So we record the the location of attribute X so we can track it for later use, then we split L1 into L1 and L3 and reblance across the two leafs. We end with: +--------+ +--------+ +--------+ | L1 | | L3 | | L2 | | fwd: 3 |---->| fwd: 2 |---->| fwd: 0 | | bwd: 0 |<----| bwd: 1 |<----| bwd: 3 | | fsp: M | | fsp: J | | fsp: N | |--------| |--------| |--------| | attr A | | attr X | | attr 1 | |--------| +--------+ |--------| | attr B | | attr 2 | |--------| |--------| .......... .......... |--------| |--------| | attr W | | attr n | +--------+ +--------+ And we track that the original attribute is now at L3:0. We then try to insert Y into L1 again, and find that there isn't enough room because the new attribute is larger than the old one. Hence we have to split again to make room for Y. We end up with this: +--------+ +--------+ +--------+ +--------+ | L1 | | L4 | | L3 | | L2 | | fwd: 4 |---->| fwd: 3 |---->| fwd: 2 |---->| fwd: 0 | | bwd: 0 |<----| bwd: 1 |<----| bwd: 4 |<----| bwd: 3 | | fsp: M | | fsp: J | | fsp: J | | fsp: N | |--------| |--------| |--------| |--------| | attr A | | attr Y | | attr X | | attr 1 | |--------| + INCOMP + +--------+ |--------| | attr B | +--------+ | attr 2 | |--------| |--------| .......... .......... |--------| |--------| | attr W | | attr n | +--------+ +--------+ And now we have the new (incomplete) attribute @ L4:0, and the original attribute at L3:0. At this point, the first transaction is committed, and we move to the flipping of the flags. This is where we are supposed to end up with this: +--------+ +--------+ +--------+ +--------+ | L1 | | L4 | | L3 | | L2 | | fwd: 4 |---->| fwd: 3 |---->| fwd: 2 |---->| fwd: 0 | | bwd: 0 |<----| bwd: 1 |<----| bwd: 4 |<----| bwd: 3 | | fsp: M | | fsp: J | | fsp: J | | fsp: N | |--------| |--------| |--------| |--------| | attr A | | attr Y | | attr X | | attr 1 | |--------| +--------+ + INCOMP + |--------| | attr B | +--------+ | attr 2 | |--------| |--------| .......... .......... |--------| |--------| | attr W | | attr n | +--------+ +--------+ But that doesn't happen properly - the attribute tracking indexes are not pointing to the right locations. What we end up with is both the old attribute to be removed pointing at L4:0 and the new attribute at L4:1. On a debug kernel, this assert fails like so: XFS: Assertion failed: args->index2 < be16_to_cpu(leaf2->hdr.count), file: fs/xfs/xfs_attr_leaf.c, line: 2725 because the new attribute location does not exist. On a production kernel, this goes unnoticed and the code proceeds ahead merrily and removes L4 because it thinks that is the block that is no longer needed. This leaves the hash index node pointing to entries L1, L4 and L2, but only blocks L1, L3 and L2 to exist. Further, the leaf level sibling list is L1 <-> L4 <-> L2, but L4 is now free space, and so everything is busted. This corruption is caused by the removal of the old attribute triggering a join - it joins everything correctly but then frees the wrong block. xfs_repair will report something like: bad sibling back pointer for block 4 in attribute fork for inode 131 problem with attribute contents in inode 131 would clear attr fork bad nblocks 8 for inode 131, would reset to 3 bad anextents 4 for inode 131, would reset to 0 The problem lies in the assignment of the old/new blocks for tracking purposes when the double leaf split occurs. The first split tries to place the new attribute inside the current leaf (i.e. "inleaf == true") and moves the old attribute (X) to the new block. This sets up the old block/index to L1:X, and newly allocated block to L3:0. It then moves attr X to the new block and tries to insert attr Y at the old index. That fails, so it splits again. With the second split, the rebalance ends up placing the new attr in the second new block - L4:0 - and this is where the code goes wrong. What is does is it sets both the new and old block index to the second new block. Hence it inserts attr Y at the right place (L4:0) but overwrites the current location of the attr to replace that is held in the new block index (currently L3:0). It over writes it with L4:1 - the index we later assert fail on. Hopefully this table will show this in a foramt that is a bit easier to understand: Split old attr index new attr index vanilla patched vanilla patched before 1st L1:26 L1:26 N/A N/A after 1st L3:0 L3:0 L1:26 L1:26 after 2nd L4:0 L3:0 L4:1 L4:0 ^^^^ ^^^^ wrong wrong The fix is surprisingly simple, for all this analysis - just stop the rebalance on the out-of leaf case from overwriting the new attr index - it's already correct for the double split case. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-12 11:09:44 +00:00
/*
* On a double leaf split, the original attr location
* is already stored in blkno2/index2, so don't
* overwrite it overwise we corrupt the tree.
*/
blk2->index = blk1->index - ichdr1.count;
xfs: fix attr tree double split corruption In certain circumstances, a double split of an attribute tree is needed to insert or replace an attribute. In rare situations, this can go wrong, leaving the attribute tree corrupted. In this case, the attr being replaced is the last attr in a leaf node, and the replacement is larger so doesn't fit in the same leaf node. When we have the initial condition of a node format attribute btree with two leaves at index 1 and 2. Call them L1 and L2. The leaf L1 is completely full, there is not a single byte of free space in it. L2 is mostly empty. The attribute being replaced - call it X - is the last attribute in L1. The way an attribute replace is executed is that the replacement attribute - call it Y - is first inserted into the tree, but has an INCOMPLETE flag set on it so that list traversals ignore it. Once this transaction is committed, a second transaction it run to atomically mark Y as COMPLETE and X as INCOMPLETE, so that a traversal will now find Y and skip X. Once that transaction is committed, attribute X is then removed. So, the initial condition is: +--------+ +--------+ | L1 | | L2 | | fwd: 2 |---->| fwd: 0 | | bwd: 0 |<----| bwd: 1 | | fsp: 0 | | fsp: N | |--------| |--------| | attr A | | attr 1 | |--------| |--------| | attr B | | attr 2 | |--------| |--------| .......... .......... |--------| |--------| | attr X | | attr n | +--------+ +--------+ So now we go to replace X, and see that L1:fsp = 0 - it is full so we can't insert Y in the same leaf. So we record the the location of attribute X so we can track it for later use, then we split L1 into L1 and L3 and reblance across the two leafs. We end with: +--------+ +--------+ +--------+ | L1 | | L3 | | L2 | | fwd: 3 |---->| fwd: 2 |---->| fwd: 0 | | bwd: 0 |<----| bwd: 1 |<----| bwd: 3 | | fsp: M | | fsp: J | | fsp: N | |--------| |--------| |--------| | attr A | | attr X | | attr 1 | |--------| +--------+ |--------| | attr B | | attr 2 | |--------| |--------| .......... .......... |--------| |--------| | attr W | | attr n | +--------+ +--------+ And we track that the original attribute is now at L3:0. We then try to insert Y into L1 again, and find that there isn't enough room because the new attribute is larger than the old one. Hence we have to split again to make room for Y. We end up with this: +--------+ +--------+ +--------+ +--------+ | L1 | | L4 | | L3 | | L2 | | fwd: 4 |---->| fwd: 3 |---->| fwd: 2 |---->| fwd: 0 | | bwd: 0 |<----| bwd: 1 |<----| bwd: 4 |<----| bwd: 3 | | fsp: M | | fsp: J | | fsp: J | | fsp: N | |--------| |--------| |--------| |--------| | attr A | | attr Y | | attr X | | attr 1 | |--------| + INCOMP + +--------+ |--------| | attr B | +--------+ | attr 2 | |--------| |--------| .......... .......... |--------| |--------| | attr W | | attr n | +--------+ +--------+ And now we have the new (incomplete) attribute @ L4:0, and the original attribute at L3:0. At this point, the first transaction is committed, and we move to the flipping of the flags. This is where we are supposed to end up with this: +--------+ +--------+ +--------+ +--------+ | L1 | | L4 | | L3 | | L2 | | fwd: 4 |---->| fwd: 3 |---->| fwd: 2 |---->| fwd: 0 | | bwd: 0 |<----| bwd: 1 |<----| bwd: 4 |<----| bwd: 3 | | fsp: M | | fsp: J | | fsp: J | | fsp: N | |--------| |--------| |--------| |--------| | attr A | | attr Y | | attr X | | attr 1 | |--------| +--------+ + INCOMP + |--------| | attr B | +--------+ | attr 2 | |--------| |--------| .......... .......... |--------| |--------| | attr W | | attr n | +--------+ +--------+ But that doesn't happen properly - the attribute tracking indexes are not pointing to the right locations. What we end up with is both the old attribute to be removed pointing at L4:0 and the new attribute at L4:1. On a debug kernel, this assert fails like so: XFS: Assertion failed: args->index2 < be16_to_cpu(leaf2->hdr.count), file: fs/xfs/xfs_attr_leaf.c, line: 2725 because the new attribute location does not exist. On a production kernel, this goes unnoticed and the code proceeds ahead merrily and removes L4 because it thinks that is the block that is no longer needed. This leaves the hash index node pointing to entries L1, L4 and L2, but only blocks L1, L3 and L2 to exist. Further, the leaf level sibling list is L1 <-> L4 <-> L2, but L4 is now free space, and so everything is busted. This corruption is caused by the removal of the old attribute triggering a join - it joins everything correctly but then frees the wrong block. xfs_repair will report something like: bad sibling back pointer for block 4 in attribute fork for inode 131 problem with attribute contents in inode 131 would clear attr fork bad nblocks 8 for inode 131, would reset to 3 bad anextents 4 for inode 131, would reset to 0 The problem lies in the assignment of the old/new blocks for tracking purposes when the double leaf split occurs. The first split tries to place the new attribute inside the current leaf (i.e. "inleaf == true") and moves the old attribute (X) to the new block. This sets up the old block/index to L1:X, and newly allocated block to L3:0. It then moves attr X to the new block and tries to insert attr Y at the old index. That fails, so it splits again. With the second split, the rebalance ends up placing the new attr in the second new block - L4:0 - and this is where the code goes wrong. What is does is it sets both the new and old block index to the second new block. Hence it inserts attr Y at the right place (L4:0) but overwrites the current location of the attr to replace that is held in the new block index (currently L3:0). It over writes it with L4:1 - the index we later assert fail on. Hopefully this table will show this in a foramt that is a bit easier to understand: Split old attr index new attr index vanilla patched vanilla patched before 1st L1:26 L1:26 N/A N/A after 1st L3:0 L3:0 L1:26 L1:26 after 2nd L4:0 L3:0 L4:1 L4:0 ^^^^ ^^^^ wrong wrong The fix is surprisingly simple, for all this analysis - just stop the rebalance on the out-of leaf case from overwriting the new attr index - it's already correct for the double split case. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-12 11:09:44 +00:00
args->index = blk2->index;
args->blkno = blk2->blkno;
if (!state->extravalid) {
/*
* set the new attr location to match the old
* one and let the higher level split code
* decide where in the leaf to place it.
*/
args->index2 = blk2->index;
args->blkno2 = blk2->blkno;
}
}
} else {
ASSERT(state->inleaf == 1);
args->index = args->index2 = blk1->index;
args->blkno = args->blkno2 = blk1->blkno;
}
}
/*
* Examine entries until we reduce the absolute difference in
* byte usage between the two blocks to a minimum.
* GROT: Is this really necessary? With other than a 512 byte blocksize,
* GROT: there will always be enough room in either block for a new entry.
* GROT: Do a double-split for this case?
*/
STATIC int
xfs_attr3_leaf_figure_balance(
struct xfs_da_state *state,
struct xfs_da_state_blk *blk1,
struct xfs_attr3_icleaf_hdr *ichdr1,
struct xfs_da_state_blk *blk2,
struct xfs_attr3_icleaf_hdr *ichdr2,
int *countarg,
int *usedbytesarg)
{
struct xfs_attr_leafblock *leaf1 = blk1->bp->b_addr;
struct xfs_attr_leafblock *leaf2 = blk2->bp->b_addr;
struct xfs_attr_leaf_entry *entry;
int count;
int max;
int index;
int totallen = 0;
int half;
int lastdelta;
int foundit = 0;
int tmp;
/*
* Examine entries until we reduce the absolute difference in
* byte usage between the two blocks to a minimum.
*/
max = ichdr1->count + ichdr2->count;
half = (max + 1) * sizeof(*entry);
half += ichdr1->usedbytes + ichdr2->usedbytes +
xfs_attr_leaf_newentsize(state->args, NULL);
half /= 2;
lastdelta = state->args->geo->blksize;
entry = xfs_attr3_leaf_entryp(leaf1);
for (count = index = 0; count < max; entry++, index++, count++) {
#define XFS_ATTR_ABS(A) (((A) < 0) ? -(A) : (A))
/*
* The new entry is in the first block, account for it.
*/
if (count == blk1->index) {
tmp = totallen + sizeof(*entry) +
xfs_attr_leaf_newentsize(state->args, NULL);
if (XFS_ATTR_ABS(half - tmp) > lastdelta)
break;
lastdelta = XFS_ATTR_ABS(half - tmp);
totallen = tmp;
foundit = 1;
}
/*
* Wrap around into the second block if necessary.
*/
if (count == ichdr1->count) {
leaf1 = leaf2;
entry = xfs_attr3_leaf_entryp(leaf1);
index = 0;
}
/*
* Figure out if next leaf entry would be too much.
*/
tmp = totallen + sizeof(*entry) + xfs_attr_leaf_entsize(leaf1,
index);
if (XFS_ATTR_ABS(half - tmp) > lastdelta)
break;
lastdelta = XFS_ATTR_ABS(half - tmp);
totallen = tmp;
#undef XFS_ATTR_ABS
}
/*
* Calculate the number of usedbytes that will end up in lower block.
* If new entry not in lower block, fix up the count.
*/
totallen -= count * sizeof(*entry);
if (foundit) {
totallen -= sizeof(*entry) +
xfs_attr_leaf_newentsize(state->args, NULL);
}
*countarg = count;
*usedbytesarg = totallen;
return foundit;
}
/*========================================================================
* Routines used for shrinking the Btree.
*========================================================================*/
/*
* Check a leaf block and its neighbors to see if the block should be
* collapsed into one or the other neighbor. Always keep the block
* with the smaller block number.
* If the current block is over 50% full, don't try to join it, return 0.
* If the block is empty, fill in the state structure and return 2.
* If it can be collapsed, fill in the state structure and return 1.
* If nothing can be done, return 0.
*
* GROT: allow for INCOMPLETE entries in calculation.
*/
int
xfs_attr3_leaf_toosmall(
struct xfs_da_state *state,
int *action)
{
struct xfs_attr_leafblock *leaf;
struct xfs_da_state_blk *blk;
struct xfs_attr3_icleaf_hdr ichdr;
struct xfs_buf *bp;
xfs_dablk_t blkno;
int bytes;
int forward;
int error;
int retval;
int i;
trace_xfs_attr_leaf_toosmall(state->args);
/*
* Check for the degenerate case of the block being over 50% full.
* If so, it's not worth even looking to see if we might be able
* to coalesce with a sibling.
*/
blk = &state->path.blk[ state->path.active-1 ];
leaf = blk->bp->b_addr;
xfs_attr3_leaf_hdr_from_disk(state->args->geo, &ichdr, leaf);
bytes = xfs_attr3_leaf_hdr_size(leaf) +
ichdr.count * sizeof(xfs_attr_leaf_entry_t) +
ichdr.usedbytes;
if (bytes > (state->args->geo->blksize >> 1)) {
*action = 0; /* blk over 50%, don't try to join */
return 0;
}
/*
* Check for the degenerate case of the block being empty.
* If the block is empty, we'll simply delete it, no need to
* coalesce it with a sibling block. We choose (arbitrarily)
* to merge with the forward block unless it is NULL.
*/
if (ichdr.count == 0) {
/*
* Make altpath point to the block we want to keep and
* path point to the block we want to drop (this one).
*/
forward = (ichdr.forw != 0);
memcpy(&state->altpath, &state->path, sizeof(state->path));
error = xfs_da3_path_shift(state, &state->altpath, forward,
0, &retval);
if (error)
return error;
if (retval) {
*action = 0;
} else {
*action = 2;
}
return 0;
}
/*
* Examine each sibling block to see if we can coalesce with
* at least 25% free space to spare. We need to figure out
* whether to merge with the forward or the backward block.
* We prefer coalescing with the lower numbered sibling so as
* to shrink an attribute list over time.
*/
/* start with smaller blk num */
forward = ichdr.forw < ichdr.back;
for (i = 0; i < 2; forward = !forward, i++) {
struct xfs_attr3_icleaf_hdr ichdr2;
if (forward)
blkno = ichdr.forw;
else
blkno = ichdr.back;
if (blkno == 0)
continue;
error = xfs_attr3_leaf_read(state->args->trans, state->args->dp,
blkno, &bp);
if (error)
return error;
xfs_attr3_leaf_hdr_from_disk(state->args->geo, &ichdr2, bp->b_addr);
bytes = state->args->geo->blksize -
(state->args->geo->blksize >> 2) -
ichdr.usedbytes - ichdr2.usedbytes -
((ichdr.count + ichdr2.count) *
sizeof(xfs_attr_leaf_entry_t)) -
xfs_attr3_leaf_hdr_size(leaf);
xfs_trans_brelse(state->args->trans, bp);
if (bytes >= 0)
break; /* fits with at least 25% to spare */
}
if (i >= 2) {
*action = 0;
return 0;
}
/*
* Make altpath point to the block we want to keep (the lower
* numbered block) and path point to the block we want to drop.
*/
memcpy(&state->altpath, &state->path, sizeof(state->path));
if (blkno < blk->blkno) {
error = xfs_da3_path_shift(state, &state->altpath, forward,
0, &retval);
} else {
error = xfs_da3_path_shift(state, &state->path, forward,
0, &retval);
}
if (error)
return error;
if (retval) {
*action = 0;
} else {
*action = 1;
}
return 0;
}
/*
* Remove a name from the leaf attribute list structure.
*
* Return 1 if leaf is less than 37% full, 0 if >= 37% full.
* If two leaves are 37% full, when combined they will leave 25% free.
*/
int
xfs_attr3_leaf_remove(
struct xfs_buf *bp,
struct xfs_da_args *args)
{
struct xfs_attr_leafblock *leaf;
struct xfs_attr3_icleaf_hdr ichdr;
struct xfs_attr_leaf_entry *entry;
int before;
int after;
int smallest;
int entsize;
int tablesize;
int tmp;
int i;
trace_xfs_attr_leaf_remove(args);
leaf = bp->b_addr;
xfs_attr3_leaf_hdr_from_disk(args->geo, &ichdr, leaf);
ASSERT(ichdr.count > 0 && ichdr.count < args->geo->blksize / 8);
ASSERT(args->index >= 0 && args->index < ichdr.count);
ASSERT(ichdr.firstused >= ichdr.count * sizeof(*entry) +
xfs_attr3_leaf_hdr_size(leaf));
entry = &xfs_attr3_leaf_entryp(leaf)[args->index];
ASSERT(be16_to_cpu(entry->nameidx) >= ichdr.firstused);
ASSERT(be16_to_cpu(entry->nameidx) < args->geo->blksize);
/*
* Scan through free region table:
* check for adjacency of free'd entry with an existing one,
* find smallest free region in case we need to replace it,
* adjust any map that borders the entry table,
*/
tablesize = ichdr.count * sizeof(xfs_attr_leaf_entry_t)
+ xfs_attr3_leaf_hdr_size(leaf);
tmp = ichdr.freemap[0].size;
before = after = -1;
smallest = XFS_ATTR_LEAF_MAPSIZE - 1;
entsize = xfs_attr_leaf_entsize(leaf, args->index);
for (i = 0; i < XFS_ATTR_LEAF_MAPSIZE; i++) {
ASSERT(ichdr.freemap[i].base < args->geo->blksize);
ASSERT(ichdr.freemap[i].size < args->geo->blksize);
if (ichdr.freemap[i].base == tablesize) {
ichdr.freemap[i].base -= sizeof(xfs_attr_leaf_entry_t);
ichdr.freemap[i].size += sizeof(xfs_attr_leaf_entry_t);
}
if (ichdr.freemap[i].base + ichdr.freemap[i].size ==
be16_to_cpu(entry->nameidx)) {
before = i;
} else if (ichdr.freemap[i].base ==
(be16_to_cpu(entry->nameidx) + entsize)) {
after = i;
} else if (ichdr.freemap[i].size < tmp) {
tmp = ichdr.freemap[i].size;
smallest = i;
}
}
/*
* Coalesce adjacent freemap regions,
* or replace the smallest region.
*/
if ((before >= 0) || (after >= 0)) {
if ((before >= 0) && (after >= 0)) {
ichdr.freemap[before].size += entsize;
ichdr.freemap[before].size += ichdr.freemap[after].size;
ichdr.freemap[after].base = 0;
ichdr.freemap[after].size = 0;
} else if (before >= 0) {
ichdr.freemap[before].size += entsize;
} else {
ichdr.freemap[after].base = be16_to_cpu(entry->nameidx);
ichdr.freemap[after].size += entsize;
}
} else {
/*
* Replace smallest region (if it is smaller than free'd entry)
*/
if (ichdr.freemap[smallest].size < entsize) {
ichdr.freemap[smallest].base = be16_to_cpu(entry->nameidx);
ichdr.freemap[smallest].size = entsize;
}
}
/*
* Did we remove the first entry?
*/
if (be16_to_cpu(entry->nameidx) == ichdr.firstused)
smallest = 1;
else
smallest = 0;
/*
* Compress the remaining entries and zero out the removed stuff.
*/
memset(xfs_attr3_leaf_name(leaf, args->index), 0, entsize);
ichdr.usedbytes -= entsize;
xfs_trans_log_buf(args->trans, bp,
XFS_DA_LOGRANGE(leaf, xfs_attr3_leaf_name(leaf, args->index),
entsize));
tmp = (ichdr.count - args->index) * sizeof(xfs_attr_leaf_entry_t);
memmove(entry, entry + 1, tmp);
ichdr.count--;
xfs_trans_log_buf(args->trans, bp,
XFS_DA_LOGRANGE(leaf, entry, tmp + sizeof(xfs_attr_leaf_entry_t)));
entry = &xfs_attr3_leaf_entryp(leaf)[ichdr.count];
memset(entry, 0, sizeof(xfs_attr_leaf_entry_t));
/*
* If we removed the first entry, re-find the first used byte
* in the name area. Note that if the entry was the "firstused",
* then we don't have a "hole" in our block resulting from
* removing the name.
*/
if (smallest) {
tmp = args->geo->blksize;
entry = xfs_attr3_leaf_entryp(leaf);
for (i = ichdr.count - 1; i >= 0; entry++, i--) {
ASSERT(be16_to_cpu(entry->nameidx) >= ichdr.firstused);
ASSERT(be16_to_cpu(entry->nameidx) < args->geo->blksize);
if (be16_to_cpu(entry->nameidx) < tmp)
tmp = be16_to_cpu(entry->nameidx);
}
ichdr.firstused = tmp;
ASSERT(ichdr.firstused != 0);
} else {
ichdr.holes = 1; /* mark as needing compaction */
}
xfs_attr3_leaf_hdr_to_disk(args->geo, leaf, &ichdr);
xfs_trans_log_buf(args->trans, bp,
XFS_DA_LOGRANGE(leaf, &leaf->hdr,
xfs_attr3_leaf_hdr_size(leaf)));
/*
* Check if leaf is less than 50% full, caller may want to
* "join" the leaf with a sibling if so.
*/
tmp = ichdr.usedbytes + xfs_attr3_leaf_hdr_size(leaf) +
ichdr.count * sizeof(xfs_attr_leaf_entry_t);
return tmp < args->geo->magicpct; /* leaf is < 37% full */
}
/*
* Move all the attribute list entries from drop_leaf into save_leaf.
*/
void
xfs_attr3_leaf_unbalance(
struct xfs_da_state *state,
struct xfs_da_state_blk *drop_blk,
struct xfs_da_state_blk *save_blk)
{
struct xfs_attr_leafblock *drop_leaf = drop_blk->bp->b_addr;
struct xfs_attr_leafblock *save_leaf = save_blk->bp->b_addr;
struct xfs_attr3_icleaf_hdr drophdr;
struct xfs_attr3_icleaf_hdr savehdr;
struct xfs_attr_leaf_entry *entry;
trace_xfs_attr_leaf_unbalance(state->args);
drop_leaf = drop_blk->bp->b_addr;
save_leaf = save_blk->bp->b_addr;
xfs_attr3_leaf_hdr_from_disk(state->args->geo, &drophdr, drop_leaf);
xfs_attr3_leaf_hdr_from_disk(state->args->geo, &savehdr, save_leaf);
entry = xfs_attr3_leaf_entryp(drop_leaf);
/*
* Save last hashval from dying block for later Btree fixup.
*/
drop_blk->hashval = be32_to_cpu(entry[drophdr.count - 1].hashval);
/*
* Check if we need a temp buffer, or can we do it in place.
* Note that we don't check "leaf" for holes because we will
* always be dropping it, toosmall() decided that for us already.
*/
if (savehdr.holes == 0) {
/*
* dest leaf has no holes, so we add there. May need
* to make some room in the entry array.
*/
if (xfs_attr3_leaf_order(save_blk->bp, &savehdr,
drop_blk->bp, &drophdr)) {
xfs_attr3_leaf_moveents(state->args,
drop_leaf, &drophdr, 0,
save_leaf, &savehdr, 0,
drophdr.count);
} else {
xfs_attr3_leaf_moveents(state->args,
drop_leaf, &drophdr, 0,
save_leaf, &savehdr,
savehdr.count, drophdr.count);
}
} else {
/*
* Destination has holes, so we make a temporary copy
* of the leaf and add them both to that.
*/
struct xfs_attr_leafblock *tmp_leaf;
struct xfs_attr3_icleaf_hdr tmphdr;
tmp_leaf = kmem_zalloc(state->args->geo->blksize, 0);
/*
* Copy the header into the temp leaf so that all the stuff
* not in the incore header is present and gets copied back in
* once we've moved all the entries.
*/
memcpy(tmp_leaf, save_leaf, xfs_attr3_leaf_hdr_size(save_leaf));
memset(&tmphdr, 0, sizeof(tmphdr));
tmphdr.magic = savehdr.magic;
tmphdr.forw = savehdr.forw;
tmphdr.back = savehdr.back;
tmphdr.firstused = state->args->geo->blksize;
/* write the header to the temp buffer to initialise it */
xfs_attr3_leaf_hdr_to_disk(state->args->geo, tmp_leaf, &tmphdr);
if (xfs_attr3_leaf_order(save_blk->bp, &savehdr,
drop_blk->bp, &drophdr)) {
xfs_attr3_leaf_moveents(state->args,
drop_leaf, &drophdr, 0,
tmp_leaf, &tmphdr, 0,
drophdr.count);
xfs_attr3_leaf_moveents(state->args,
save_leaf, &savehdr, 0,
tmp_leaf, &tmphdr, tmphdr.count,
savehdr.count);
} else {
xfs_attr3_leaf_moveents(state->args,
save_leaf, &savehdr, 0,
tmp_leaf, &tmphdr, 0,
savehdr.count);
xfs_attr3_leaf_moveents(state->args,
drop_leaf, &drophdr, 0,
tmp_leaf, &tmphdr, tmphdr.count,
drophdr.count);
}
memcpy(save_leaf, tmp_leaf, state->args->geo->blksize);
savehdr = tmphdr; /* struct copy */
kmem_free(tmp_leaf);
}
xfs_attr3_leaf_hdr_to_disk(state->args->geo, save_leaf, &savehdr);
xfs_trans_log_buf(state->args->trans, save_blk->bp, 0,
state->args->geo->blksize - 1);
/*
* Copy out last hashval in each block for B-tree code.
*/
entry = xfs_attr3_leaf_entryp(save_leaf);
save_blk->hashval = be32_to_cpu(entry[savehdr.count - 1].hashval);
}
/*========================================================================
* Routines used for finding things in the Btree.
*========================================================================*/
/*
* Look up a name in a leaf attribute list structure.
* This is the internal routine, it uses the caller's buffer.
*
* Note that duplicate keys are allowed, but only check within the
* current leaf node. The Btree code must check in adjacent leaf nodes.
*
* Return in args->index the index into the entry[] array of either
* the found entry, or where the entry should have been (insert before
* that entry).
*
* Don't change the args->value unless we find the attribute.
*/
int
xfs_attr3_leaf_lookup_int(
struct xfs_buf *bp,
struct xfs_da_args *args)
{
struct xfs_attr_leafblock *leaf;
struct xfs_attr3_icleaf_hdr ichdr;
struct xfs_attr_leaf_entry *entry;
struct xfs_attr_leaf_entry *entries;
struct xfs_attr_leaf_name_local *name_loc;
struct xfs_attr_leaf_name_remote *name_rmt;
xfs_dahash_t hashval;
int probe;
int span;
trace_xfs_attr_leaf_lookup(args);
leaf = bp->b_addr;
xfs_attr3_leaf_hdr_from_disk(args->geo, &ichdr, leaf);
entries = xfs_attr3_leaf_entryp(leaf);
if (ichdr.count >= args->geo->blksize / 8) {
xfs_buf_corruption_error(bp);
return -EFSCORRUPTED;
}
/*
* Binary search. (note: small blocks will skip this loop)
*/
hashval = args->hashval;
probe = span = ichdr.count / 2;
for (entry = &entries[probe]; span > 4; entry = &entries[probe]) {
span /= 2;
if (be32_to_cpu(entry->hashval) < hashval)
probe += span;
else if (be32_to_cpu(entry->hashval) > hashval)
probe -= span;
else
break;
}
if (!(probe >= 0 && (!ichdr.count || probe < ichdr.count))) {
xfs_buf_corruption_error(bp);
return -EFSCORRUPTED;
}
if (!(span <= 4 || be32_to_cpu(entry->hashval) == hashval)) {
xfs_buf_corruption_error(bp);
return -EFSCORRUPTED;
}
/*
* Since we may have duplicate hashval's, find the first matching
* hashval in the leaf.
*/
while (probe > 0 && be32_to_cpu(entry->hashval) >= hashval) {
entry--;
probe--;
}
while (probe < ichdr.count &&
be32_to_cpu(entry->hashval) < hashval) {
entry++;
probe++;
}
if (probe == ichdr.count || be32_to_cpu(entry->hashval) != hashval) {
args->index = probe;
return -ENOATTR;
}
/*
* Duplicate keys may be present, so search all of them for a match.
*/
for (; probe < ichdr.count && (be32_to_cpu(entry->hashval) == hashval);
entry++, probe++) {
/*
* GROT: Add code to remove incomplete entries.
*/
/*
* If we are looking for INCOMPLETE entries, show only those.
* If we are looking for complete entries, show only those.
*/
if (!!(args->op_flags & XFS_DA_OP_INCOMPLETE) !=
!!(entry->flags & XFS_ATTR_INCOMPLETE)) {
continue;
}
if (entry->flags & XFS_ATTR_LOCAL) {
name_loc = xfs_attr3_leaf_name_local(leaf, probe);
if (name_loc->namelen != args->namelen)
continue;
if (memcmp(args->name, name_loc->nameval,
args->namelen) != 0)
continue;
if (!xfs_attr_namesp_match(args->flags, entry->flags))
continue;
args->index = probe;
return -EEXIST;
} else {
name_rmt = xfs_attr3_leaf_name_remote(leaf, probe);
if (name_rmt->namelen != args->namelen)
continue;
if (memcmp(args->name, name_rmt->name,
args->namelen) != 0)
continue;
if (!xfs_attr_namesp_match(args->flags, entry->flags))
continue;
args->index = probe;
xfs: remote attribute overwrite causes transaction overrun Commit e461fcb ("xfs: remote attribute lookups require the value length") passes the remote attribute length in the xfs_da_args structure on lookup so that CRC calculations and validity checking can be performed correctly by related code. This, unfortunately has the side effect of changing the args->valuelen parameter in cases where it shouldn't. That is, when we replace a remote attribute, the incoming replacement stores the value and length in args->value and args->valuelen, but then the lookup which finds the existing remote attribute overwrites args->valuelen with the length of the remote attribute being replaced. Hence when we go to create the new attribute, we create it of the size of the existing remote attribute, not the size it is supposed to be. When the new attribute is much smaller than the old attribute, this results in a transaction overrun and an ASSERT() failure on a debug kernel: XFS: Assertion failed: tp->t_blk_res_used <= tp->t_blk_res, file: fs/xfs/xfs_trans.c, line: 331 Fix this by keeping the remote attribute value length separate to the attribute value length in the xfs_da_args structure. The enables us to pass the length of the remote attribute to be removed without overwriting the new attribute's length. Also, ensure that when we save remote block contexts for a later rename we zero the original state variables so that we don't confuse the state of the attribute to be removes with the state of the new attribute that we just added. [Spotted by Brain Foster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-05-05 21:37:31 +00:00
args->rmtvaluelen = be32_to_cpu(name_rmt->valuelen);
args->rmtblkno = be32_to_cpu(name_rmt->valueblk);
xfs: rework remote attr CRCs Note: this changes the on-disk remote attribute format. I assert that this is OK to do as CRCs are marked experimental and the first kernel it is included in has not yet reached release yet. Further, the userspace utilities are still evolving and so anyone using this stuff right now is a developer or tester using volatile filesystems for testing this feature. Hence changing the format right now to save longer term pain is the right thing to do. The fundamental change is to move from a header per extent in the attribute to a header per filesytem block in the attribute. This means there are more header blocks and the parsing of the attribute data is slightly more complex, but it has the advantage that we always know the size of the attribute on disk based on the length of the data it contains. This is where the header-per-extent method has problems. We don't know the size of the attribute on disk without first knowing how many extents are used to hold it. And we can't tell from a mapping lookup, either, because remote attributes can be allocated contiguously with other attribute blocks and so there is no obvious way of determining the actual size of the atribute on disk short of walking and mapping buffers. The problem with this approach is that if we map a buffer incorrectly (e.g. we make the last buffer for the attribute data too long), we then get buffer cache lookup failure when we map it correctly. i.e. we get a size mismatch on lookup. This is not necessarily fatal, but it's a cache coherency problem that can lead to returning the wrong data to userspace or writing the wrong data to disk. And debug kernels will assert fail if this occurs. I found lots of niggly little problems trying to fix this issue on a 4k block size filesystem, finally getting it to pass with lots of fixes. The thing is, 1024 byte filesystems still failed, and it was getting really complex handling all the corner cases that were showing up. And there were clearly more that I hadn't found yet. It is complex, fragile code, and if we don't fix it now, it will be complex, fragile code forever more. Hence the simple fix is to add a header to each filesystem block. This gives us the same relationship between the attribute data length and the number of blocks on disk as we have without CRCs - it's a linear mapping and doesn't require us to guess anything. It is simple to implement, too - the remote block count calculated at lookup time can be used by the remote attribute set/get/remove code without modification for both CRC and non-CRC filesystems. The world becomes sane again. Because the copy-in and copy-out now need to iterate over each filesystem block, I moved them into helper functions so we separate the block mapping and buffer manupulations from the attribute data and CRC header manipulations. The code becomes much clearer as a result, and it is a lot easier to understand and debug. It also appears to be much more robust - once it worked on 4k block size filesystems, it has worked without failure on 1k block size filesystems, too. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-05-21 08:02:08 +00:00
args->rmtblkcnt = xfs_attr3_rmt_blocks(
args->dp->i_mount,
xfs: remote attribute overwrite causes transaction overrun Commit e461fcb ("xfs: remote attribute lookups require the value length") passes the remote attribute length in the xfs_da_args structure on lookup so that CRC calculations and validity checking can be performed correctly by related code. This, unfortunately has the side effect of changing the args->valuelen parameter in cases where it shouldn't. That is, when we replace a remote attribute, the incoming replacement stores the value and length in args->value and args->valuelen, but then the lookup which finds the existing remote attribute overwrites args->valuelen with the length of the remote attribute being replaced. Hence when we go to create the new attribute, we create it of the size of the existing remote attribute, not the size it is supposed to be. When the new attribute is much smaller than the old attribute, this results in a transaction overrun and an ASSERT() failure on a debug kernel: XFS: Assertion failed: tp->t_blk_res_used <= tp->t_blk_res, file: fs/xfs/xfs_trans.c, line: 331 Fix this by keeping the remote attribute value length separate to the attribute value length in the xfs_da_args structure. The enables us to pass the length of the remote attribute to be removed without overwriting the new attribute's length. Also, ensure that when we save remote block contexts for a later rename we zero the original state variables so that we don't confuse the state of the attribute to be removes with the state of the new attribute that we just added. [Spotted by Brain Foster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-05-05 21:37:31 +00:00
args->rmtvaluelen);
return -EEXIST;
}
}
args->index = probe;
return -ENOATTR;
}
/*
* Get the value associated with an attribute name from a leaf attribute
* list structure.
*
* If args->valuelen is zero, only the length needs to be returned. Unlike a
* lookup, we only return an error if the attribute does not exist or we can't
* retrieve the value.
*/
int
xfs_attr3_leaf_getvalue(
struct xfs_buf *bp,
struct xfs_da_args *args)
{
struct xfs_attr_leafblock *leaf;
struct xfs_attr3_icleaf_hdr ichdr;
struct xfs_attr_leaf_entry *entry;
struct xfs_attr_leaf_name_local *name_loc;
struct xfs_attr_leaf_name_remote *name_rmt;
leaf = bp->b_addr;
xfs_attr3_leaf_hdr_from_disk(args->geo, &ichdr, leaf);
ASSERT(ichdr.count < args->geo->blksize / 8);
ASSERT(args->index < ichdr.count);
entry = &xfs_attr3_leaf_entryp(leaf)[args->index];
if (entry->flags & XFS_ATTR_LOCAL) {
name_loc = xfs_attr3_leaf_name_local(leaf, args->index);
ASSERT(name_loc->namelen == args->namelen);
ASSERT(memcmp(args->name, name_loc->nameval, args->namelen) == 0);
return xfs_attr_copy_value(args,
&name_loc->nameval[args->namelen],
be16_to_cpu(name_loc->valuelen));
}
name_rmt = xfs_attr3_leaf_name_remote(leaf, args->index);
ASSERT(name_rmt->namelen == args->namelen);
ASSERT(memcmp(args->name, name_rmt->name, args->namelen) == 0);
args->rmtvaluelen = be32_to_cpu(name_rmt->valuelen);
args->rmtblkno = be32_to_cpu(name_rmt->valueblk);
args->rmtblkcnt = xfs_attr3_rmt_blocks(args->dp->i_mount,
args->rmtvaluelen);
return xfs_attr_copy_value(args, NULL, args->rmtvaluelen);
}
/*========================================================================
* Utility routines.
*========================================================================*/
/*
* Move the indicated entries from one leaf to another.
* NOTE: this routine modifies both source and destination leaves.
*/
/*ARGSUSED*/
STATIC void
xfs_attr3_leaf_moveents(
struct xfs_da_args *args,
struct xfs_attr_leafblock *leaf_s,
struct xfs_attr3_icleaf_hdr *ichdr_s,
int start_s,
struct xfs_attr_leafblock *leaf_d,
struct xfs_attr3_icleaf_hdr *ichdr_d,
int start_d,
int count)
{
struct xfs_attr_leaf_entry *entry_s;
struct xfs_attr_leaf_entry *entry_d;
int desti;
int tmp;
int i;
/*
* Check for nothing to do.
*/
if (count == 0)
return;
/*
* Set up environment.
*/
ASSERT(ichdr_s->magic == XFS_ATTR_LEAF_MAGIC ||
ichdr_s->magic == XFS_ATTR3_LEAF_MAGIC);
ASSERT(ichdr_s->magic == ichdr_d->magic);
ASSERT(ichdr_s->count > 0 && ichdr_s->count < args->geo->blksize / 8);
ASSERT(ichdr_s->firstused >= (ichdr_s->count * sizeof(*entry_s))
+ xfs_attr3_leaf_hdr_size(leaf_s));
ASSERT(ichdr_d->count < args->geo->blksize / 8);
ASSERT(ichdr_d->firstused >= (ichdr_d->count * sizeof(*entry_d))
+ xfs_attr3_leaf_hdr_size(leaf_d));
ASSERT(start_s < ichdr_s->count);
ASSERT(start_d <= ichdr_d->count);
ASSERT(count <= ichdr_s->count);
/*
* Move the entries in the destination leaf up to make a hole?
*/
if (start_d < ichdr_d->count) {
tmp = ichdr_d->count - start_d;
tmp *= sizeof(xfs_attr_leaf_entry_t);
entry_s = &xfs_attr3_leaf_entryp(leaf_d)[start_d];
entry_d = &xfs_attr3_leaf_entryp(leaf_d)[start_d + count];
memmove(entry_d, entry_s, tmp);
}
/*
* Copy all entry's in the same (sorted) order,
* but allocate attribute info packed and in sequence.
*/
entry_s = &xfs_attr3_leaf_entryp(leaf_s)[start_s];
entry_d = &xfs_attr3_leaf_entryp(leaf_d)[start_d];
desti = start_d;
for (i = 0; i < count; entry_s++, entry_d++, desti++, i++) {
ASSERT(be16_to_cpu(entry_s->nameidx) >= ichdr_s->firstused);
tmp = xfs_attr_leaf_entsize(leaf_s, start_s + i);
#ifdef GROT
/*
* Code to drop INCOMPLETE entries. Difficult to use as we
* may also need to change the insertion index. Code turned
* off for 6.2, should be revisited later.
*/
if (entry_s->flags & XFS_ATTR_INCOMPLETE) { /* skip partials? */
memset(xfs_attr3_leaf_name(leaf_s, start_s + i), 0, tmp);
ichdr_s->usedbytes -= tmp;
ichdr_s->count -= 1;
entry_d--; /* to compensate for ++ in loop hdr */
desti--;
if ((start_s + i) < offset)
result++; /* insertion index adjustment */
} else {
#endif /* GROT */
ichdr_d->firstused -= tmp;
/* both on-disk, don't endian flip twice */
entry_d->hashval = entry_s->hashval;
entry_d->nameidx = cpu_to_be16(ichdr_d->firstused);
entry_d->flags = entry_s->flags;
ASSERT(be16_to_cpu(entry_d->nameidx) + tmp
<= args->geo->blksize);
memmove(xfs_attr3_leaf_name(leaf_d, desti),
xfs_attr3_leaf_name(leaf_s, start_s + i), tmp);
ASSERT(be16_to_cpu(entry_s->nameidx) + tmp
<= args->geo->blksize);
memset(xfs_attr3_leaf_name(leaf_s, start_s + i), 0, tmp);
ichdr_s->usedbytes -= tmp;
ichdr_d->usedbytes += tmp;
ichdr_s->count -= 1;
ichdr_d->count += 1;
tmp = ichdr_d->count * sizeof(xfs_attr_leaf_entry_t)
+ xfs_attr3_leaf_hdr_size(leaf_d);
ASSERT(ichdr_d->firstused >= tmp);
#ifdef GROT
}
#endif /* GROT */
}
/*
* Zero out the entries we just copied.
*/
if (start_s == ichdr_s->count) {
tmp = count * sizeof(xfs_attr_leaf_entry_t);
entry_s = &xfs_attr3_leaf_entryp(leaf_s)[start_s];
ASSERT(((char *)entry_s + tmp) <=
((char *)leaf_s + args->geo->blksize));
memset(entry_s, 0, tmp);
} else {
/*
* Move the remaining entries down to fill the hole,
* then zero the entries at the top.
*/
tmp = (ichdr_s->count - count) * sizeof(xfs_attr_leaf_entry_t);
entry_s = &xfs_attr3_leaf_entryp(leaf_s)[start_s + count];
entry_d = &xfs_attr3_leaf_entryp(leaf_s)[start_s];
memmove(entry_d, entry_s, tmp);
tmp = count * sizeof(xfs_attr_leaf_entry_t);
entry_s = &xfs_attr3_leaf_entryp(leaf_s)[ichdr_s->count];
ASSERT(((char *)entry_s + tmp) <=
((char *)leaf_s + args->geo->blksize));
memset(entry_s, 0, tmp);
}
/*
* Fill in the freemap information
*/
ichdr_d->freemap[0].base = xfs_attr3_leaf_hdr_size(leaf_d);
ichdr_d->freemap[0].base += ichdr_d->count * sizeof(xfs_attr_leaf_entry_t);
ichdr_d->freemap[0].size = ichdr_d->firstused - ichdr_d->freemap[0].base;
ichdr_d->freemap[1].base = 0;
ichdr_d->freemap[2].base = 0;
ichdr_d->freemap[1].size = 0;
ichdr_d->freemap[2].size = 0;
ichdr_s->holes = 1; /* leaf may not be compact */
}
/*
* Pick up the last hashvalue from a leaf block.
*/
xfs_dahash_t
xfs_attr_leaf_lasthash(
struct xfs_buf *bp,
int *count)
{
struct xfs_attr3_icleaf_hdr ichdr;
struct xfs_attr_leaf_entry *entries;
struct xfs_mount *mp = bp->b_mount;
xfs_attr3_leaf_hdr_from_disk(mp->m_attr_geo, &ichdr, bp->b_addr);
entries = xfs_attr3_leaf_entryp(bp->b_addr);
if (count)
*count = ichdr.count;
if (!ichdr.count)
return 0;
return be32_to_cpu(entries[ichdr.count - 1].hashval);
}
/*
* Calculate the number of bytes used to store the indicated attribute
* (whether local or remote only calculate bytes in this block).
*/
STATIC int
xfs_attr_leaf_entsize(xfs_attr_leafblock_t *leaf, int index)
{
struct xfs_attr_leaf_entry *entries;
xfs_attr_leaf_name_local_t *name_loc;
xfs_attr_leaf_name_remote_t *name_rmt;
int size;
entries = xfs_attr3_leaf_entryp(leaf);
if (entries[index].flags & XFS_ATTR_LOCAL) {
name_loc = xfs_attr3_leaf_name_local(leaf, index);
size = xfs_attr_leaf_entsize_local(name_loc->namelen,
be16_to_cpu(name_loc->valuelen));
} else {
name_rmt = xfs_attr3_leaf_name_remote(leaf, index);
size = xfs_attr_leaf_entsize_remote(name_rmt->namelen);
}
return size;
}
/*
* Calculate the number of bytes that would be required to store the new
* attribute (whether local or remote only calculate bytes in this block).
* This routine decides as a side effect whether the attribute will be
* a "local" or a "remote" attribute.
*/
int
xfs_attr_leaf_newentsize(
struct xfs_da_args *args,
int *local)
{
int size;
size = xfs_attr_leaf_entsize_local(args->namelen, args->valuelen);
if (size < xfs_attr_leaf_entsize_local_max(args->geo->blksize)) {
if (local)
*local = 1;
return size;
}
if (local)
*local = 0;
return xfs_attr_leaf_entsize_remote(args->namelen);
}
/*========================================================================
* Manage the INCOMPLETE flag in a leaf entry
*========================================================================*/
/*
* Clear the INCOMPLETE flag on an entry in a leaf block.
*/
int
xfs_attr3_leaf_clearflag(
struct xfs_da_args *args)
{
struct xfs_attr_leafblock *leaf;
struct xfs_attr_leaf_entry *entry;
struct xfs_attr_leaf_name_remote *name_rmt;
struct xfs_buf *bp;
int error;
#ifdef DEBUG
struct xfs_attr3_icleaf_hdr ichdr;
xfs_attr_leaf_name_local_t *name_loc;
int namelen;
char *name;
#endif /* DEBUG */
trace_xfs_attr_leaf_clearflag(args);
/*
* Set up the operation.
*/
error = xfs_attr3_leaf_read(args->trans, args->dp, args->blkno, &bp);
if (error)
return error;
leaf = bp->b_addr;
entry = &xfs_attr3_leaf_entryp(leaf)[args->index];
ASSERT(entry->flags & XFS_ATTR_INCOMPLETE);
#ifdef DEBUG
xfs_attr3_leaf_hdr_from_disk(args->geo, &ichdr, leaf);
ASSERT(args->index < ichdr.count);
ASSERT(args->index >= 0);
if (entry->flags & XFS_ATTR_LOCAL) {
name_loc = xfs_attr3_leaf_name_local(leaf, args->index);
namelen = name_loc->namelen;
name = (char *)name_loc->nameval;
} else {
name_rmt = xfs_attr3_leaf_name_remote(leaf, args->index);
namelen = name_rmt->namelen;
name = (char *)name_rmt->name;
}
ASSERT(be32_to_cpu(entry->hashval) == args->hashval);
ASSERT(namelen == args->namelen);
ASSERT(memcmp(name, args->name, namelen) == 0);
#endif /* DEBUG */
entry->flags &= ~XFS_ATTR_INCOMPLETE;
xfs_trans_log_buf(args->trans, bp,
XFS_DA_LOGRANGE(leaf, entry, sizeof(*entry)));
if (args->rmtblkno) {
ASSERT((entry->flags & XFS_ATTR_LOCAL) == 0);
name_rmt = xfs_attr3_leaf_name_remote(leaf, args->index);
name_rmt->valueblk = cpu_to_be32(args->rmtblkno);
xfs: remote attribute overwrite causes transaction overrun Commit e461fcb ("xfs: remote attribute lookups require the value length") passes the remote attribute length in the xfs_da_args structure on lookup so that CRC calculations and validity checking can be performed correctly by related code. This, unfortunately has the side effect of changing the args->valuelen parameter in cases where it shouldn't. That is, when we replace a remote attribute, the incoming replacement stores the value and length in args->value and args->valuelen, but then the lookup which finds the existing remote attribute overwrites args->valuelen with the length of the remote attribute being replaced. Hence when we go to create the new attribute, we create it of the size of the existing remote attribute, not the size it is supposed to be. When the new attribute is much smaller than the old attribute, this results in a transaction overrun and an ASSERT() failure on a debug kernel: XFS: Assertion failed: tp->t_blk_res_used <= tp->t_blk_res, file: fs/xfs/xfs_trans.c, line: 331 Fix this by keeping the remote attribute value length separate to the attribute value length in the xfs_da_args structure. The enables us to pass the length of the remote attribute to be removed without overwriting the new attribute's length. Also, ensure that when we save remote block contexts for a later rename we zero the original state variables so that we don't confuse the state of the attribute to be removes with the state of the new attribute that we just added. [Spotted by Brain Foster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-05-05 21:37:31 +00:00
name_rmt->valuelen = cpu_to_be32(args->rmtvaluelen);
xfs_trans_log_buf(args->trans, bp,
XFS_DA_LOGRANGE(leaf, name_rmt, sizeof(*name_rmt)));
}
/*
* Commit the flag value change and start the next trans in series.
*/
return xfs_trans_roll_inode(&args->trans, args->dp);
}
/*
* Set the INCOMPLETE flag on an entry in a leaf block.
*/
int
xfs_attr3_leaf_setflag(
struct xfs_da_args *args)
{
struct xfs_attr_leafblock *leaf;
struct xfs_attr_leaf_entry *entry;
struct xfs_attr_leaf_name_remote *name_rmt;
struct xfs_buf *bp;
int error;
#ifdef DEBUG
struct xfs_attr3_icleaf_hdr ichdr;
#endif
trace_xfs_attr_leaf_setflag(args);
/*
* Set up the operation.
*/
error = xfs_attr3_leaf_read(args->trans, args->dp, args->blkno, &bp);
if (error)
return error;
leaf = bp->b_addr;
#ifdef DEBUG
xfs_attr3_leaf_hdr_from_disk(args->geo, &ichdr, leaf);
ASSERT(args->index < ichdr.count);
ASSERT(args->index >= 0);
#endif
entry = &xfs_attr3_leaf_entryp(leaf)[args->index];
ASSERT((entry->flags & XFS_ATTR_INCOMPLETE) == 0);
entry->flags |= XFS_ATTR_INCOMPLETE;
xfs_trans_log_buf(args->trans, bp,
XFS_DA_LOGRANGE(leaf, entry, sizeof(*entry)));
if ((entry->flags & XFS_ATTR_LOCAL) == 0) {
name_rmt = xfs_attr3_leaf_name_remote(leaf, args->index);
name_rmt->valueblk = 0;
name_rmt->valuelen = 0;
xfs_trans_log_buf(args->trans, bp,
XFS_DA_LOGRANGE(leaf, name_rmt, sizeof(*name_rmt)));
}
/*
* Commit the flag value change and start the next trans in series.
*/
return xfs_trans_roll_inode(&args->trans, args->dp);
}
/*
* In a single transaction, clear the INCOMPLETE flag on the leaf entry
* given by args->blkno/index and set the INCOMPLETE flag on the leaf
* entry given by args->blkno2/index2.
*
* Note that they could be in different blocks, or in the same block.
*/
int
xfs_attr3_leaf_flipflags(
struct xfs_da_args *args)
{
struct xfs_attr_leafblock *leaf1;
struct xfs_attr_leafblock *leaf2;
struct xfs_attr_leaf_entry *entry1;
struct xfs_attr_leaf_entry *entry2;
struct xfs_attr_leaf_name_remote *name_rmt;
struct xfs_buf *bp1;
struct xfs_buf *bp2;
int error;
#ifdef DEBUG
struct xfs_attr3_icleaf_hdr ichdr1;
struct xfs_attr3_icleaf_hdr ichdr2;
xfs_attr_leaf_name_local_t *name_loc;
int namelen1, namelen2;
char *name1, *name2;
#endif /* DEBUG */
trace_xfs_attr_leaf_flipflags(args);
/*
* Read the block containing the "old" attr
*/
error = xfs_attr3_leaf_read(args->trans, args->dp, args->blkno, &bp1);
if (error)
return error;
/*
* Read the block containing the "new" attr, if it is different
*/
if (args->blkno2 != args->blkno) {
error = xfs_attr3_leaf_read(args->trans, args->dp, args->blkno2,
&bp2);
if (error)
return error;
} else {
bp2 = bp1;
}
leaf1 = bp1->b_addr;
entry1 = &xfs_attr3_leaf_entryp(leaf1)[args->index];
leaf2 = bp2->b_addr;
entry2 = &xfs_attr3_leaf_entryp(leaf2)[args->index2];
#ifdef DEBUG
xfs_attr3_leaf_hdr_from_disk(args->geo, &ichdr1, leaf1);
ASSERT(args->index < ichdr1.count);
ASSERT(args->index >= 0);
xfs_attr3_leaf_hdr_from_disk(args->geo, &ichdr2, leaf2);
ASSERT(args->index2 < ichdr2.count);
ASSERT(args->index2 >= 0);
if (entry1->flags & XFS_ATTR_LOCAL) {
name_loc = xfs_attr3_leaf_name_local(leaf1, args->index);
namelen1 = name_loc->namelen;
name1 = (char *)name_loc->nameval;
} else {
name_rmt = xfs_attr3_leaf_name_remote(leaf1, args->index);
namelen1 = name_rmt->namelen;
name1 = (char *)name_rmt->name;
}
if (entry2->flags & XFS_ATTR_LOCAL) {
name_loc = xfs_attr3_leaf_name_local(leaf2, args->index2);
namelen2 = name_loc->namelen;
name2 = (char *)name_loc->nameval;
} else {
name_rmt = xfs_attr3_leaf_name_remote(leaf2, args->index2);
namelen2 = name_rmt->namelen;
name2 = (char *)name_rmt->name;
}
ASSERT(be32_to_cpu(entry1->hashval) == be32_to_cpu(entry2->hashval));
ASSERT(namelen1 == namelen2);
ASSERT(memcmp(name1, name2, namelen1) == 0);
#endif /* DEBUG */
ASSERT(entry1->flags & XFS_ATTR_INCOMPLETE);
ASSERT((entry2->flags & XFS_ATTR_INCOMPLETE) == 0);
entry1->flags &= ~XFS_ATTR_INCOMPLETE;
xfs_trans_log_buf(args->trans, bp1,
XFS_DA_LOGRANGE(leaf1, entry1, sizeof(*entry1)));
if (args->rmtblkno) {
ASSERT((entry1->flags & XFS_ATTR_LOCAL) == 0);
name_rmt = xfs_attr3_leaf_name_remote(leaf1, args->index);
name_rmt->valueblk = cpu_to_be32(args->rmtblkno);
xfs: remote attribute overwrite causes transaction overrun Commit e461fcb ("xfs: remote attribute lookups require the value length") passes the remote attribute length in the xfs_da_args structure on lookup so that CRC calculations and validity checking can be performed correctly by related code. This, unfortunately has the side effect of changing the args->valuelen parameter in cases where it shouldn't. That is, when we replace a remote attribute, the incoming replacement stores the value and length in args->value and args->valuelen, but then the lookup which finds the existing remote attribute overwrites args->valuelen with the length of the remote attribute being replaced. Hence when we go to create the new attribute, we create it of the size of the existing remote attribute, not the size it is supposed to be. When the new attribute is much smaller than the old attribute, this results in a transaction overrun and an ASSERT() failure on a debug kernel: XFS: Assertion failed: tp->t_blk_res_used <= tp->t_blk_res, file: fs/xfs/xfs_trans.c, line: 331 Fix this by keeping the remote attribute value length separate to the attribute value length in the xfs_da_args structure. The enables us to pass the length of the remote attribute to be removed without overwriting the new attribute's length. Also, ensure that when we save remote block contexts for a later rename we zero the original state variables so that we don't confuse the state of the attribute to be removes with the state of the new attribute that we just added. [Spotted by Brain Foster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-05-05 21:37:31 +00:00
name_rmt->valuelen = cpu_to_be32(args->rmtvaluelen);
xfs_trans_log_buf(args->trans, bp1,
XFS_DA_LOGRANGE(leaf1, name_rmt, sizeof(*name_rmt)));
}
entry2->flags |= XFS_ATTR_INCOMPLETE;
xfs_trans_log_buf(args->trans, bp2,
XFS_DA_LOGRANGE(leaf2, entry2, sizeof(*entry2)));
if ((entry2->flags & XFS_ATTR_LOCAL) == 0) {
name_rmt = xfs_attr3_leaf_name_remote(leaf2, args->index2);
name_rmt->valueblk = 0;
name_rmt->valuelen = 0;
xfs_trans_log_buf(args->trans, bp2,
XFS_DA_LOGRANGE(leaf2, name_rmt, sizeof(*name_rmt)));
}
/*
* Commit the flag value change and start the next trans in series.
*/
error = xfs_trans_roll_inode(&args->trans, args->dp);
return error;
}